1 /* 2 * HIL MLC state machine and serio interface driver 3 * 4 * Copyright (c) 2001 Brian S. Julin 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * Alternatively, this software may be distributed under the terms of the 17 * GNU General Public License ("GPL"). 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * 29 * References: 30 * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A 31 * 32 * 33 * Driver theory of operation: 34 * 35 * Some access methods and an ISR is defined by the sub-driver 36 * (e.g. hp_sdc_mlc.c). These methods are expected to provide a 37 * few bits of logic in addition to raw access to the HIL MLC, 38 * specifically, the ISR, which is entirely registered by the 39 * sub-driver and invoked directly, must check for record 40 * termination or packet match, at which point a semaphore must 41 * be cleared and then the hil_mlcs_tasklet must be scheduled. 42 * 43 * The hil_mlcs_tasklet processes the state machine for all MLCs 44 * each time it runs, checking each MLC's progress at the current 45 * node in the state machine, and moving the MLC to subsequent nodes 46 * in the state machine when appropriate. It will reschedule 47 * itself if output is pending. (This rescheduling should be replaced 48 * at some point with a sub-driver-specific mechanism.) 49 * 50 * A timer task prods the tasklet once per second to prevent 51 * hangups when attached devices do not return expected data 52 * and to initiate probes of the loop for new devices. 53 */ 54 55 #include <linux/hil_mlc.h> 56 #include <linux/errno.h> 57 #include <linux/kernel.h> 58 #include <linux/module.h> 59 #include <linux/init.h> 60 #include <linux/interrupt.h> 61 #include <linux/slab.h> 62 #include <linux/timer.h> 63 #include <linux/list.h> 64 65 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>"); 66 MODULE_DESCRIPTION("HIL MLC serio"); 67 MODULE_LICENSE("Dual BSD/GPL"); 68 69 EXPORT_SYMBOL(hil_mlc_register); 70 EXPORT_SYMBOL(hil_mlc_unregister); 71 72 #define PREFIX "HIL MLC: " 73 74 static LIST_HEAD(hil_mlcs); 75 static DEFINE_RWLOCK(hil_mlcs_lock); 76 static struct timer_list hil_mlcs_kicker; 77 static int hil_mlcs_probe, hil_mlc_stop; 78 79 static void hil_mlcs_process(unsigned long unused); 80 static DECLARE_TASKLET_DISABLED_OLD(hil_mlcs_tasklet, hil_mlcs_process); 81 82 83 /* #define HIL_MLC_DEBUG */ 84 85 /********************** Device info/instance management **********************/ 86 87 static void hil_mlc_clear_di_map(hil_mlc *mlc, int val) 88 { 89 int j; 90 91 for (j = val; j < 7 ; j++) 92 mlc->di_map[j] = -1; 93 } 94 95 static void hil_mlc_clear_di_scratch(hil_mlc *mlc) 96 { 97 memset(&mlc->di_scratch, 0, sizeof(mlc->di_scratch)); 98 } 99 100 static void hil_mlc_copy_di_scratch(hil_mlc *mlc, int idx) 101 { 102 memcpy(&mlc->di[idx], &mlc->di_scratch, sizeof(mlc->di_scratch)); 103 } 104 105 static int hil_mlc_match_di_scratch(hil_mlc *mlc) 106 { 107 int idx; 108 109 for (idx = 0; idx < HIL_MLC_DEVMEM; idx++) { 110 int j, found = 0; 111 112 /* In-use slots are not eligible. */ 113 for (j = 0; j < 7 ; j++) 114 if (mlc->di_map[j] == idx) 115 found++; 116 117 if (found) 118 continue; 119 120 if (!memcmp(mlc->di + idx, &mlc->di_scratch, 121 sizeof(mlc->di_scratch))) 122 break; 123 } 124 return idx >= HIL_MLC_DEVMEM ? -1 : idx; 125 } 126 127 static int hil_mlc_find_free_di(hil_mlc *mlc) 128 { 129 int idx; 130 131 /* TODO: Pick all-zero slots first, failing that, 132 * randomize the slot picked among those eligible. 133 */ 134 for (idx = 0; idx < HIL_MLC_DEVMEM; idx++) { 135 int j, found = 0; 136 137 for (j = 0; j < 7 ; j++) 138 if (mlc->di_map[j] == idx) 139 found++; 140 141 if (!found) 142 break; 143 } 144 145 return idx; /* Note: It is guaranteed at least one above will match */ 146 } 147 148 static inline void hil_mlc_clean_serio_map(hil_mlc *mlc) 149 { 150 int idx; 151 152 for (idx = 0; idx < HIL_MLC_DEVMEM; idx++) { 153 int j, found = 0; 154 155 for (j = 0; j < 7 ; j++) 156 if (mlc->di_map[j] == idx) 157 found++; 158 159 if (!found) 160 mlc->serio_map[idx].di_revmap = -1; 161 } 162 } 163 164 static void hil_mlc_send_polls(hil_mlc *mlc) 165 { 166 int did, i, cnt; 167 struct serio *serio; 168 struct serio_driver *drv; 169 170 i = cnt = 0; 171 did = (mlc->ipacket[0] & HIL_PKT_ADDR_MASK) >> 8; 172 serio = did ? mlc->serio[mlc->di_map[did - 1]] : NULL; 173 drv = (serio != NULL) ? serio->drv : NULL; 174 175 while (mlc->icount < 15 - i) { 176 hil_packet p; 177 178 p = mlc->ipacket[i]; 179 if (did != (p & HIL_PKT_ADDR_MASK) >> 8) { 180 if (drv && drv->interrupt) { 181 drv->interrupt(serio, 0, 0); 182 drv->interrupt(serio, HIL_ERR_INT >> 16, 0); 183 drv->interrupt(serio, HIL_PKT_CMD >> 8, 0); 184 drv->interrupt(serio, HIL_CMD_POL + cnt, 0); 185 } 186 187 did = (p & HIL_PKT_ADDR_MASK) >> 8; 188 serio = did ? mlc->serio[mlc->di_map[did-1]] : NULL; 189 drv = (serio != NULL) ? serio->drv : NULL; 190 cnt = 0; 191 } 192 193 cnt++; 194 i++; 195 196 if (drv && drv->interrupt) { 197 drv->interrupt(serio, (p >> 24), 0); 198 drv->interrupt(serio, (p >> 16) & 0xff, 0); 199 drv->interrupt(serio, (p >> 8) & ~HIL_PKT_ADDR_MASK, 0); 200 drv->interrupt(serio, p & 0xff, 0); 201 } 202 } 203 } 204 205 /*************************** State engine *********************************/ 206 207 #define HILSEN_SCHED 0x000100 /* Schedule the tasklet */ 208 #define HILSEN_BREAK 0x000200 /* Wait until next pass */ 209 #define HILSEN_UP 0x000400 /* relative node#, decrement */ 210 #define HILSEN_DOWN 0x000800 /* relative node#, increment */ 211 #define HILSEN_FOLLOW 0x001000 /* use retval as next node# */ 212 213 #define HILSEN_MASK 0x0000ff 214 #define HILSEN_START 0 215 #define HILSEN_RESTART 1 216 #define HILSEN_DHR 9 217 #define HILSEN_DHR2 10 218 #define HILSEN_IFC 14 219 #define HILSEN_HEAL0 16 220 #define HILSEN_HEAL 18 221 #define HILSEN_ACF 21 222 #define HILSEN_ACF2 22 223 #define HILSEN_DISC0 25 224 #define HILSEN_DISC 27 225 #define HILSEN_MATCH 40 226 #define HILSEN_OPERATE 41 227 #define HILSEN_PROBE 44 228 #define HILSEN_DSR 52 229 #define HILSEN_REPOLL 55 230 #define HILSEN_IFCACF 58 231 #define HILSEN_END 60 232 233 #define HILSEN_NEXT (HILSEN_DOWN | 1) 234 #define HILSEN_SAME (HILSEN_DOWN | 0) 235 #define HILSEN_LAST (HILSEN_UP | 1) 236 237 #define HILSEN_DOZE (HILSEN_SAME | HILSEN_SCHED | HILSEN_BREAK) 238 #define HILSEN_SLEEP (HILSEN_SAME | HILSEN_BREAK) 239 240 static int hilse_match(hil_mlc *mlc, int unused) 241 { 242 int rc; 243 244 rc = hil_mlc_match_di_scratch(mlc); 245 if (rc == -1) { 246 rc = hil_mlc_find_free_di(mlc); 247 if (rc == -1) 248 goto err; 249 250 #ifdef HIL_MLC_DEBUG 251 printk(KERN_DEBUG PREFIX "new in slot %i\n", rc); 252 #endif 253 hil_mlc_copy_di_scratch(mlc, rc); 254 mlc->di_map[mlc->ddi] = rc; 255 mlc->serio_map[rc].di_revmap = mlc->ddi; 256 hil_mlc_clean_serio_map(mlc); 257 serio_rescan(mlc->serio[rc]); 258 return -1; 259 } 260 261 mlc->di_map[mlc->ddi] = rc; 262 #ifdef HIL_MLC_DEBUG 263 printk(KERN_DEBUG PREFIX "same in slot %i\n", rc); 264 #endif 265 mlc->serio_map[rc].di_revmap = mlc->ddi; 266 hil_mlc_clean_serio_map(mlc); 267 return 0; 268 269 err: 270 printk(KERN_ERR PREFIX "Residual device slots exhausted, close some serios!\n"); 271 return 1; 272 } 273 274 /* An LCV used to prevent runaway loops, forces 5 second sleep when reset. */ 275 static int hilse_init_lcv(hil_mlc *mlc, int unused) 276 { 277 time64_t now = ktime_get_seconds(); 278 279 if (mlc->lcv && (now - mlc->lcv_time) < 5) 280 return -1; 281 282 mlc->lcv_time = now; 283 mlc->lcv = 0; 284 285 return 0; 286 } 287 288 static int hilse_inc_lcv(hil_mlc *mlc, int lim) 289 { 290 return mlc->lcv++ >= lim ? -1 : 0; 291 } 292 293 #if 0 294 static int hilse_set_lcv(hil_mlc *mlc, int val) 295 { 296 mlc->lcv = val; 297 298 return 0; 299 } 300 #endif 301 302 /* Management of the discovered device index (zero based, -1 means no devs) */ 303 static int hilse_set_ddi(hil_mlc *mlc, int val) 304 { 305 mlc->ddi = val; 306 hil_mlc_clear_di_map(mlc, val + 1); 307 308 return 0; 309 } 310 311 static int hilse_dec_ddi(hil_mlc *mlc, int unused) 312 { 313 mlc->ddi--; 314 if (mlc->ddi <= -1) { 315 mlc->ddi = -1; 316 hil_mlc_clear_di_map(mlc, 0); 317 return -1; 318 } 319 hil_mlc_clear_di_map(mlc, mlc->ddi + 1); 320 321 return 0; 322 } 323 324 static int hilse_inc_ddi(hil_mlc *mlc, int unused) 325 { 326 BUG_ON(mlc->ddi >= 6); 327 mlc->ddi++; 328 329 return 0; 330 } 331 332 static int hilse_take_idd(hil_mlc *mlc, int unused) 333 { 334 int i; 335 336 /* Help the state engine: 337 * Is this a real IDD response or just an echo? 338 * 339 * Real IDD response does not start with a command. 340 */ 341 if (mlc->ipacket[0] & HIL_PKT_CMD) 342 goto bail; 343 344 /* Should have the command echoed further down. */ 345 for (i = 1; i < 16; i++) { 346 if (((mlc->ipacket[i] & HIL_PKT_ADDR_MASK) == 347 (mlc->ipacket[0] & HIL_PKT_ADDR_MASK)) && 348 (mlc->ipacket[i] & HIL_PKT_CMD) && 349 ((mlc->ipacket[i] & HIL_PKT_DATA_MASK) == HIL_CMD_IDD)) 350 break; 351 } 352 if (i > 15) 353 goto bail; 354 355 /* And the rest of the packets should still be clear. */ 356 while (++i < 16) 357 if (mlc->ipacket[i]) 358 break; 359 360 if (i < 16) 361 goto bail; 362 363 for (i = 0; i < 16; i++) 364 mlc->di_scratch.idd[i] = 365 mlc->ipacket[i] & HIL_PKT_DATA_MASK; 366 367 /* Next step is to see if RSC supported */ 368 if (mlc->di_scratch.idd[1] & HIL_IDD_HEADER_RSC) 369 return HILSEN_NEXT; 370 371 if (mlc->di_scratch.idd[1] & HIL_IDD_HEADER_EXD) 372 return HILSEN_DOWN | 4; 373 374 return 0; 375 376 bail: 377 mlc->ddi--; 378 379 return -1; /* This should send us off to ACF */ 380 } 381 382 static int hilse_take_rsc(hil_mlc *mlc, int unused) 383 { 384 int i; 385 386 for (i = 0; i < 16; i++) 387 mlc->di_scratch.rsc[i] = 388 mlc->ipacket[i] & HIL_PKT_DATA_MASK; 389 390 /* Next step is to see if EXD supported (IDD has already been read) */ 391 if (mlc->di_scratch.idd[1] & HIL_IDD_HEADER_EXD) 392 return HILSEN_NEXT; 393 394 return 0; 395 } 396 397 static int hilse_take_exd(hil_mlc *mlc, int unused) 398 { 399 int i; 400 401 for (i = 0; i < 16; i++) 402 mlc->di_scratch.exd[i] = 403 mlc->ipacket[i] & HIL_PKT_DATA_MASK; 404 405 /* Next step is to see if RNM supported. */ 406 if (mlc->di_scratch.exd[0] & HIL_EXD_HEADER_RNM) 407 return HILSEN_NEXT; 408 409 return 0; 410 } 411 412 static int hilse_take_rnm(hil_mlc *mlc, int unused) 413 { 414 int i; 415 416 for (i = 0; i < 16; i++) 417 mlc->di_scratch.rnm[i] = 418 mlc->ipacket[i] & HIL_PKT_DATA_MASK; 419 420 printk(KERN_INFO PREFIX "Device name gotten: %16s\n", 421 mlc->di_scratch.rnm); 422 423 return 0; 424 } 425 426 static int hilse_operate(hil_mlc *mlc, int repoll) 427 { 428 429 if (mlc->opercnt == 0) 430 hil_mlcs_probe = 0; 431 mlc->opercnt = 1; 432 433 hil_mlc_send_polls(mlc); 434 435 if (!hil_mlcs_probe) 436 return 0; 437 hil_mlcs_probe = 0; 438 mlc->opercnt = 0; 439 return 1; 440 } 441 442 #define FUNC(funct, funct_arg, zero_rc, neg_rc, pos_rc) \ 443 { HILSE_FUNC, { .func = funct }, funct_arg, zero_rc, neg_rc, pos_rc }, 444 #define OUT(pack) \ 445 { HILSE_OUT, { .packet = pack }, 0, HILSEN_NEXT, HILSEN_DOZE, 0 }, 446 #define CTS \ 447 { HILSE_CTS, { .packet = 0 }, 0, HILSEN_NEXT | HILSEN_SCHED | HILSEN_BREAK, HILSEN_DOZE, 0 }, 448 #define EXPECT(comp, to, got, got_wrong, timed_out) \ 449 { HILSE_EXPECT, { .packet = comp }, to, got, got_wrong, timed_out }, 450 #define EXPECT_LAST(comp, to, got, got_wrong, timed_out) \ 451 { HILSE_EXPECT_LAST, { .packet = comp }, to, got, got_wrong, timed_out }, 452 #define EXPECT_DISC(comp, to, got, got_wrong, timed_out) \ 453 { HILSE_EXPECT_DISC, { .packet = comp }, to, got, got_wrong, timed_out }, 454 #define IN(to, got, got_error, timed_out) \ 455 { HILSE_IN, { .packet = 0 }, to, got, got_error, timed_out }, 456 #define OUT_DISC(pack) \ 457 { HILSE_OUT_DISC, { .packet = pack }, 0, 0, 0, 0 }, 458 #define OUT_LAST(pack) \ 459 { HILSE_OUT_LAST, { .packet = pack }, 0, 0, 0, 0 }, 460 461 static const struct hilse_node hil_mlc_se[HILSEN_END] = { 462 463 /* 0 HILSEN_START */ 464 FUNC(hilse_init_lcv, 0, HILSEN_NEXT, HILSEN_SLEEP, 0) 465 466 /* 1 HILSEN_RESTART */ 467 FUNC(hilse_inc_lcv, 10, HILSEN_NEXT, HILSEN_START, 0) 468 OUT(HIL_CTRL_ONLY) /* Disable APE */ 469 CTS 470 471 #define TEST_PACKET(x) \ 472 (HIL_PKT_CMD | (x << HIL_PKT_ADDR_SHIFT) | x << 4 | x) 473 474 OUT(HIL_DO_ALTER_CTRL | HIL_CTRL_TEST | TEST_PACKET(0x5)) 475 EXPECT(HIL_ERR_INT | TEST_PACKET(0x5), 476 2000, HILSEN_NEXT, HILSEN_RESTART, HILSEN_RESTART) 477 OUT(HIL_DO_ALTER_CTRL | HIL_CTRL_TEST | TEST_PACKET(0xa)) 478 EXPECT(HIL_ERR_INT | TEST_PACKET(0xa), 479 2000, HILSEN_NEXT, HILSEN_RESTART, HILSEN_RESTART) 480 OUT(HIL_CTRL_ONLY | 0) /* Disable test mode */ 481 482 /* 9 HILSEN_DHR */ 483 FUNC(hilse_init_lcv, 0, HILSEN_NEXT, HILSEN_SLEEP, 0) 484 485 /* 10 HILSEN_DHR2 */ 486 FUNC(hilse_inc_lcv, 10, HILSEN_NEXT, HILSEN_START, 0) 487 FUNC(hilse_set_ddi, -1, HILSEN_NEXT, 0, 0) 488 OUT(HIL_PKT_CMD | HIL_CMD_DHR) 489 IN(300000, HILSEN_DHR2, HILSEN_DHR2, HILSEN_NEXT) 490 491 /* 14 HILSEN_IFC */ 492 OUT(HIL_PKT_CMD | HIL_CMD_IFC) 493 EXPECT(HIL_PKT_CMD | HIL_CMD_IFC | HIL_ERR_INT, 494 20000, HILSEN_DISC, HILSEN_DHR2, HILSEN_NEXT ) 495 496 /* If devices are there, they weren't in PUP or other loopback mode. 497 * We're more concerned at this point with restoring operation 498 * to devices than discovering new ones, so we try to salvage 499 * the loop configuration by closing off the loop. 500 */ 501 502 /* 16 HILSEN_HEAL0 */ 503 FUNC(hilse_dec_ddi, 0, HILSEN_NEXT, HILSEN_ACF, 0) 504 FUNC(hilse_inc_ddi, 0, HILSEN_NEXT, 0, 0) 505 506 /* 18 HILSEN_HEAL */ 507 OUT_LAST(HIL_CMD_ELB) 508 EXPECT_LAST(HIL_CMD_ELB | HIL_ERR_INT, 509 20000, HILSEN_REPOLL, HILSEN_DSR, HILSEN_NEXT) 510 FUNC(hilse_dec_ddi, 0, HILSEN_HEAL, HILSEN_NEXT, 0) 511 512 /* 21 HILSEN_ACF */ 513 FUNC(hilse_init_lcv, 0, HILSEN_NEXT, HILSEN_DOZE, 0) 514 515 /* 22 HILSEN_ACF2 */ 516 FUNC(hilse_inc_lcv, 10, HILSEN_NEXT, HILSEN_START, 0) 517 OUT(HIL_PKT_CMD | HIL_CMD_ACF | 1) 518 IN(20000, HILSEN_NEXT, HILSEN_DSR, HILSEN_NEXT) 519 520 /* 25 HILSEN_DISC0 */ 521 OUT_DISC(HIL_PKT_CMD | HIL_CMD_ELB) 522 EXPECT_DISC(HIL_PKT_CMD | HIL_CMD_ELB | HIL_ERR_INT, 523 20000, HILSEN_NEXT, HILSEN_DSR, HILSEN_DSR) 524 525 /* Only enter here if response just received */ 526 /* 27 HILSEN_DISC */ 527 OUT_DISC(HIL_PKT_CMD | HIL_CMD_IDD) 528 EXPECT_DISC(HIL_PKT_CMD | HIL_CMD_IDD | HIL_ERR_INT, 529 20000, HILSEN_NEXT, HILSEN_DSR, HILSEN_START) 530 FUNC(hilse_inc_ddi, 0, HILSEN_NEXT, HILSEN_START, 0) 531 FUNC(hilse_take_idd, 0, HILSEN_MATCH, HILSEN_IFCACF, HILSEN_FOLLOW) 532 OUT_LAST(HIL_PKT_CMD | HIL_CMD_RSC) 533 EXPECT_LAST(HIL_PKT_CMD | HIL_CMD_RSC | HIL_ERR_INT, 534 30000, HILSEN_NEXT, HILSEN_DSR, HILSEN_DSR) 535 FUNC(hilse_take_rsc, 0, HILSEN_MATCH, 0, HILSEN_FOLLOW) 536 OUT_LAST(HIL_PKT_CMD | HIL_CMD_EXD) 537 EXPECT_LAST(HIL_PKT_CMD | HIL_CMD_EXD | HIL_ERR_INT, 538 30000, HILSEN_NEXT, HILSEN_DSR, HILSEN_DSR) 539 FUNC(hilse_take_exd, 0, HILSEN_MATCH, 0, HILSEN_FOLLOW) 540 OUT_LAST(HIL_PKT_CMD | HIL_CMD_RNM) 541 EXPECT_LAST(HIL_PKT_CMD | HIL_CMD_RNM | HIL_ERR_INT, 542 30000, HILSEN_NEXT, HILSEN_DSR, HILSEN_DSR) 543 FUNC(hilse_take_rnm, 0, HILSEN_MATCH, 0, 0) 544 545 /* 40 HILSEN_MATCH */ 546 FUNC(hilse_match, 0, HILSEN_NEXT, HILSEN_NEXT, /* TODO */ 0) 547 548 /* 41 HILSEN_OPERATE */ 549 OUT(HIL_PKT_CMD | HIL_CMD_POL) 550 EXPECT(HIL_PKT_CMD | HIL_CMD_POL | HIL_ERR_INT, 551 20000, HILSEN_NEXT, HILSEN_DSR, HILSEN_NEXT) 552 FUNC(hilse_operate, 0, HILSEN_OPERATE, HILSEN_IFC, HILSEN_NEXT) 553 554 /* 44 HILSEN_PROBE */ 555 OUT_LAST(HIL_PKT_CMD | HIL_CMD_EPT) 556 IN(10000, HILSEN_DISC, HILSEN_DSR, HILSEN_NEXT) 557 OUT_DISC(HIL_PKT_CMD | HIL_CMD_ELB) 558 IN(10000, HILSEN_DISC, HILSEN_DSR, HILSEN_NEXT) 559 OUT(HIL_PKT_CMD | HIL_CMD_ACF | 1) 560 IN(10000, HILSEN_DISC0, HILSEN_DSR, HILSEN_NEXT) 561 OUT_LAST(HIL_PKT_CMD | HIL_CMD_ELB) 562 IN(10000, HILSEN_OPERATE, HILSEN_DSR, HILSEN_DSR) 563 564 /* 52 HILSEN_DSR */ 565 FUNC(hilse_set_ddi, -1, HILSEN_NEXT, 0, 0) 566 OUT(HIL_PKT_CMD | HIL_CMD_DSR) 567 IN(20000, HILSEN_DHR, HILSEN_DHR, HILSEN_IFC) 568 569 /* 55 HILSEN_REPOLL */ 570 OUT(HIL_PKT_CMD | HIL_CMD_RPL) 571 EXPECT(HIL_PKT_CMD | HIL_CMD_RPL | HIL_ERR_INT, 572 20000, HILSEN_NEXT, HILSEN_DSR, HILSEN_NEXT) 573 FUNC(hilse_operate, 1, HILSEN_OPERATE, HILSEN_IFC, HILSEN_PROBE) 574 575 /* 58 HILSEN_IFCACF */ 576 OUT(HIL_PKT_CMD | HIL_CMD_IFC) 577 EXPECT(HIL_PKT_CMD | HIL_CMD_IFC | HIL_ERR_INT, 578 20000, HILSEN_ACF2, HILSEN_DHR2, HILSEN_HEAL) 579 580 /* 60 HILSEN_END */ 581 }; 582 583 static inline void hilse_setup_input(hil_mlc *mlc, const struct hilse_node *node) 584 { 585 586 switch (node->act) { 587 case HILSE_EXPECT_DISC: 588 mlc->imatch = node->object.packet; 589 mlc->imatch |= ((mlc->ddi + 2) << HIL_PKT_ADDR_SHIFT); 590 break; 591 case HILSE_EXPECT_LAST: 592 mlc->imatch = node->object.packet; 593 mlc->imatch |= ((mlc->ddi + 1) << HIL_PKT_ADDR_SHIFT); 594 break; 595 case HILSE_EXPECT: 596 mlc->imatch = node->object.packet; 597 break; 598 case HILSE_IN: 599 mlc->imatch = 0; 600 break; 601 default: 602 BUG(); 603 } 604 mlc->istarted = 1; 605 mlc->intimeout = usecs_to_jiffies(node->arg); 606 mlc->instart = jiffies; 607 mlc->icount = 15; 608 memset(mlc->ipacket, 0, 16 * sizeof(hil_packet)); 609 BUG_ON(down_trylock(&mlc->isem)); 610 } 611 612 #ifdef HIL_MLC_DEBUG 613 static int doze; 614 static int seidx; /* For debug */ 615 #endif 616 617 static int hilse_donode(hil_mlc *mlc) 618 { 619 const struct hilse_node *node; 620 int nextidx = 0; 621 int sched_long = 0; 622 unsigned long flags; 623 624 #ifdef HIL_MLC_DEBUG 625 if (mlc->seidx && mlc->seidx != seidx && 626 mlc->seidx != 41 && mlc->seidx != 42 && mlc->seidx != 43) { 627 printk(KERN_DEBUG PREFIX "z%i \n {%i}", doze, mlc->seidx); 628 doze = 0; 629 } 630 631 seidx = mlc->seidx; 632 #endif 633 node = hil_mlc_se + mlc->seidx; 634 635 switch (node->act) { 636 int rc; 637 hil_packet pack; 638 639 case HILSE_FUNC: 640 BUG_ON(node->object.func == NULL); 641 rc = node->object.func(mlc, node->arg); 642 nextidx = (rc > 0) ? node->ugly : 643 ((rc < 0) ? node->bad : node->good); 644 if (nextidx == HILSEN_FOLLOW) 645 nextidx = rc; 646 break; 647 648 case HILSE_EXPECT_LAST: 649 case HILSE_EXPECT_DISC: 650 case HILSE_EXPECT: 651 case HILSE_IN: 652 /* Already set up from previous HILSE_OUT_* */ 653 write_lock_irqsave(&mlc->lock, flags); 654 rc = mlc->in(mlc, node->arg); 655 if (rc == 2) { 656 nextidx = HILSEN_DOZE; 657 sched_long = 1; 658 write_unlock_irqrestore(&mlc->lock, flags); 659 break; 660 } 661 if (rc == 1) 662 nextidx = node->ugly; 663 else if (rc == 0) 664 nextidx = node->good; 665 else 666 nextidx = node->bad; 667 mlc->istarted = 0; 668 write_unlock_irqrestore(&mlc->lock, flags); 669 break; 670 671 case HILSE_OUT_LAST: 672 write_lock_irqsave(&mlc->lock, flags); 673 pack = node->object.packet; 674 pack |= ((mlc->ddi + 1) << HIL_PKT_ADDR_SHIFT); 675 goto out; 676 677 case HILSE_OUT_DISC: 678 write_lock_irqsave(&mlc->lock, flags); 679 pack = node->object.packet; 680 pack |= ((mlc->ddi + 2) << HIL_PKT_ADDR_SHIFT); 681 goto out; 682 683 case HILSE_OUT: 684 write_lock_irqsave(&mlc->lock, flags); 685 pack = node->object.packet; 686 out: 687 if (!mlc->istarted) { 688 /* Prepare to receive input */ 689 if ((node + 1)->act & HILSE_IN) 690 hilse_setup_input(mlc, node + 1); 691 } 692 693 write_unlock_irqrestore(&mlc->lock, flags); 694 695 if (down_trylock(&mlc->osem)) { 696 nextidx = HILSEN_DOZE; 697 break; 698 } 699 up(&mlc->osem); 700 701 write_lock_irqsave(&mlc->lock, flags); 702 if (!mlc->ostarted) { 703 mlc->ostarted = 1; 704 mlc->opacket = pack; 705 rc = mlc->out(mlc); 706 nextidx = HILSEN_DOZE; 707 write_unlock_irqrestore(&mlc->lock, flags); 708 if (rc) { 709 hil_mlc_stop = 1; 710 return 1; 711 } 712 break; 713 } 714 mlc->ostarted = 0; 715 mlc->instart = jiffies; 716 write_unlock_irqrestore(&mlc->lock, flags); 717 nextidx = HILSEN_NEXT; 718 break; 719 720 case HILSE_CTS: 721 write_lock_irqsave(&mlc->lock, flags); 722 rc = mlc->cts(mlc); 723 nextidx = rc ? node->bad : node->good; 724 write_unlock_irqrestore(&mlc->lock, flags); 725 if (rc) { 726 hil_mlc_stop = 1; 727 return 1; 728 } 729 break; 730 731 default: 732 BUG(); 733 } 734 735 #ifdef HIL_MLC_DEBUG 736 if (nextidx == HILSEN_DOZE) 737 doze++; 738 #endif 739 740 while (nextidx & HILSEN_SCHED) { 741 unsigned long now = jiffies; 742 743 if (!sched_long) 744 goto sched; 745 746 if (time_after(now, mlc->instart + mlc->intimeout)) 747 goto sched; 748 mod_timer(&hil_mlcs_kicker, mlc->instart + mlc->intimeout); 749 break; 750 sched: 751 tasklet_schedule(&hil_mlcs_tasklet); 752 break; 753 } 754 755 if (nextidx & HILSEN_DOWN) 756 mlc->seidx += nextidx & HILSEN_MASK; 757 else if (nextidx & HILSEN_UP) 758 mlc->seidx -= nextidx & HILSEN_MASK; 759 else 760 mlc->seidx = nextidx & HILSEN_MASK; 761 762 if (nextidx & HILSEN_BREAK) 763 return 1; 764 765 return 0; 766 } 767 768 /******************** tasklet context functions **************************/ 769 static void hil_mlcs_process(unsigned long unused) 770 { 771 struct list_head *tmp; 772 773 read_lock(&hil_mlcs_lock); 774 list_for_each(tmp, &hil_mlcs) { 775 struct hil_mlc *mlc = list_entry(tmp, hil_mlc, list); 776 while (hilse_donode(mlc) == 0) { 777 #ifdef HIL_MLC_DEBUG 778 if (mlc->seidx != 41 && 779 mlc->seidx != 42 && 780 mlc->seidx != 43) 781 printk(KERN_DEBUG PREFIX " + "); 782 #endif 783 } 784 } 785 read_unlock(&hil_mlcs_lock); 786 } 787 788 /************************* Keepalive timer task *********************/ 789 790 static void hil_mlcs_timer(struct timer_list *unused) 791 { 792 if (hil_mlc_stop) { 793 /* could not send packet - stop immediately. */ 794 pr_warn(PREFIX "HIL seems stuck - Disabling HIL MLC.\n"); 795 return; 796 } 797 798 hil_mlcs_probe = 1; 799 tasklet_schedule(&hil_mlcs_tasklet); 800 /* Re-insert the periodic task. */ 801 if (!timer_pending(&hil_mlcs_kicker)) 802 mod_timer(&hil_mlcs_kicker, jiffies + HZ); 803 } 804 805 /******************** user/kernel context functions **********************/ 806 807 static int hil_mlc_serio_write(struct serio *serio, unsigned char c) 808 { 809 struct hil_mlc_serio_map *map; 810 struct hil_mlc *mlc; 811 struct serio_driver *drv; 812 uint8_t *idx, *last; 813 814 map = serio->port_data; 815 BUG_ON(map == NULL); 816 817 mlc = map->mlc; 818 BUG_ON(mlc == NULL); 819 820 mlc->serio_opacket[map->didx] |= 821 ((hil_packet)c) << (8 * (3 - mlc->serio_oidx[map->didx])); 822 823 if (mlc->serio_oidx[map->didx] >= 3) { 824 /* for now only commands */ 825 if (!(mlc->serio_opacket[map->didx] & HIL_PKT_CMD)) 826 return -EIO; 827 switch (mlc->serio_opacket[map->didx] & HIL_PKT_DATA_MASK) { 828 case HIL_CMD_IDD: 829 idx = mlc->di[map->didx].idd; 830 goto emu; 831 case HIL_CMD_RSC: 832 idx = mlc->di[map->didx].rsc; 833 goto emu; 834 case HIL_CMD_EXD: 835 idx = mlc->di[map->didx].exd; 836 goto emu; 837 case HIL_CMD_RNM: 838 idx = mlc->di[map->didx].rnm; 839 goto emu; 840 default: 841 break; 842 } 843 mlc->serio_oidx[map->didx] = 0; 844 mlc->serio_opacket[map->didx] = 0; 845 } 846 847 mlc->serio_oidx[map->didx]++; 848 return -EIO; 849 emu: 850 drv = serio->drv; 851 BUG_ON(drv == NULL); 852 853 last = idx + 15; 854 while ((last != idx) && (*last == 0)) 855 last--; 856 857 while (idx != last) { 858 drv->interrupt(serio, 0, 0); 859 drv->interrupt(serio, HIL_ERR_INT >> 16, 0); 860 drv->interrupt(serio, 0, 0); 861 drv->interrupt(serio, *idx, 0); 862 idx++; 863 } 864 drv->interrupt(serio, 0, 0); 865 drv->interrupt(serio, HIL_ERR_INT >> 16, 0); 866 drv->interrupt(serio, HIL_PKT_CMD >> 8, 0); 867 drv->interrupt(serio, *idx, 0); 868 869 mlc->serio_oidx[map->didx] = 0; 870 mlc->serio_opacket[map->didx] = 0; 871 872 return 0; 873 } 874 875 static int hil_mlc_serio_open(struct serio *serio) 876 { 877 struct hil_mlc_serio_map *map; 878 struct hil_mlc *mlc; 879 880 if (serio_get_drvdata(serio) != NULL) 881 return -EBUSY; 882 883 map = serio->port_data; 884 BUG_ON(map == NULL); 885 886 mlc = map->mlc; 887 BUG_ON(mlc == NULL); 888 889 return 0; 890 } 891 892 static void hil_mlc_serio_close(struct serio *serio) 893 { 894 struct hil_mlc_serio_map *map; 895 struct hil_mlc *mlc; 896 897 map = serio->port_data; 898 BUG_ON(map == NULL); 899 900 mlc = map->mlc; 901 BUG_ON(mlc == NULL); 902 903 serio_set_drvdata(serio, NULL); 904 serio->drv = NULL; 905 /* TODO wake up interruptable */ 906 } 907 908 static const struct serio_device_id hil_mlc_serio_id = { 909 .type = SERIO_HIL_MLC, 910 .proto = SERIO_HIL, 911 .extra = SERIO_ANY, 912 .id = SERIO_ANY, 913 }; 914 915 int hil_mlc_register(hil_mlc *mlc) 916 { 917 int i; 918 unsigned long flags; 919 920 BUG_ON(mlc == NULL); 921 922 mlc->istarted = 0; 923 mlc->ostarted = 0; 924 925 rwlock_init(&mlc->lock); 926 sema_init(&mlc->osem, 1); 927 928 sema_init(&mlc->isem, 1); 929 mlc->icount = -1; 930 mlc->imatch = 0; 931 932 mlc->opercnt = 0; 933 934 sema_init(&(mlc->csem), 0); 935 936 hil_mlc_clear_di_scratch(mlc); 937 hil_mlc_clear_di_map(mlc, 0); 938 for (i = 0; i < HIL_MLC_DEVMEM; i++) { 939 struct serio *mlc_serio; 940 hil_mlc_copy_di_scratch(mlc, i); 941 mlc_serio = kzalloc(sizeof(*mlc_serio), GFP_KERNEL); 942 mlc->serio[i] = mlc_serio; 943 if (!mlc->serio[i]) { 944 for (; i >= 0; i--) 945 kfree(mlc->serio[i]); 946 return -ENOMEM; 947 } 948 snprintf(mlc_serio->name, sizeof(mlc_serio->name)-1, "HIL_SERIO%d", i); 949 snprintf(mlc_serio->phys, sizeof(mlc_serio->phys)-1, "HIL%d", i); 950 mlc_serio->id = hil_mlc_serio_id; 951 mlc_serio->id.id = i; /* HIL port no. */ 952 mlc_serio->write = hil_mlc_serio_write; 953 mlc_serio->open = hil_mlc_serio_open; 954 mlc_serio->close = hil_mlc_serio_close; 955 mlc_serio->port_data = &(mlc->serio_map[i]); 956 mlc->serio_map[i].mlc = mlc; 957 mlc->serio_map[i].didx = i; 958 mlc->serio_map[i].di_revmap = -1; 959 mlc->serio_opacket[i] = 0; 960 mlc->serio_oidx[i] = 0; 961 serio_register_port(mlc_serio); 962 } 963 964 mlc->tasklet = &hil_mlcs_tasklet; 965 966 write_lock_irqsave(&hil_mlcs_lock, flags); 967 list_add_tail(&mlc->list, &hil_mlcs); 968 mlc->seidx = HILSEN_START; 969 write_unlock_irqrestore(&hil_mlcs_lock, flags); 970 971 tasklet_schedule(&hil_mlcs_tasklet); 972 return 0; 973 } 974 975 int hil_mlc_unregister(hil_mlc *mlc) 976 { 977 struct list_head *tmp; 978 unsigned long flags; 979 int i; 980 981 BUG_ON(mlc == NULL); 982 983 write_lock_irqsave(&hil_mlcs_lock, flags); 984 list_for_each(tmp, &hil_mlcs) 985 if (list_entry(tmp, hil_mlc, list) == mlc) 986 goto found; 987 988 /* not found in list */ 989 write_unlock_irqrestore(&hil_mlcs_lock, flags); 990 tasklet_schedule(&hil_mlcs_tasklet); 991 return -ENODEV; 992 993 found: 994 list_del(tmp); 995 write_unlock_irqrestore(&hil_mlcs_lock, flags); 996 997 for (i = 0; i < HIL_MLC_DEVMEM; i++) { 998 serio_unregister_port(mlc->serio[i]); 999 mlc->serio[i] = NULL; 1000 } 1001 1002 tasklet_schedule(&hil_mlcs_tasklet); 1003 return 0; 1004 } 1005 1006 /**************************** Module interface *************************/ 1007 1008 static int __init hil_mlc_init(void) 1009 { 1010 timer_setup(&hil_mlcs_kicker, &hil_mlcs_timer, 0); 1011 mod_timer(&hil_mlcs_kicker, jiffies + HZ); 1012 1013 tasklet_enable(&hil_mlcs_tasklet); 1014 1015 return 0; 1016 } 1017 1018 static void __exit hil_mlc_exit(void) 1019 { 1020 del_timer_sync(&hil_mlcs_kicker); 1021 tasklet_kill(&hil_mlcs_tasklet); 1022 } 1023 1024 module_init(hil_mlc_init); 1025 module_exit(hil_mlc_exit); 1026