1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (c) 1999-2001 Vojtech Pavlik 4 */ 5 6 /* 7 * 82C710 C&T mouse port chip driver for Linux 8 */ 9 10 #include <linux/delay.h> 11 #include <linux/module.h> 12 #include <linux/ioport.h> 13 #include <linux/init.h> 14 #include <linux/interrupt.h> 15 #include <linux/serio.h> 16 #include <linux/errno.h> 17 #include <linux/err.h> 18 #include <linux/platform_device.h> 19 #include <linux/slab.h> 20 21 #include <asm/io.h> 22 23 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); 24 MODULE_DESCRIPTION("82C710 C&T mouse port chip driver"); 25 MODULE_LICENSE("GPL"); 26 27 /* 28 * ct82c710 interface 29 */ 30 31 #define CT82C710_DEV_IDLE 0x01 /* Device Idle */ 32 #define CT82C710_RX_FULL 0x02 /* Device Char received */ 33 #define CT82C710_TX_IDLE 0x04 /* Device XMIT Idle */ 34 #define CT82C710_RESET 0x08 /* Device Reset */ 35 #define CT82C710_INTS_ON 0x10 /* Device Interrupt On */ 36 #define CT82C710_ERROR_FLAG 0x20 /* Device Error */ 37 #define CT82C710_CLEAR 0x40 /* Device Clear */ 38 #define CT82C710_ENABLE 0x80 /* Device Enable */ 39 40 #define CT82C710_IRQ 12 41 42 #define CT82C710_DATA ct82c710_iores.start 43 #define CT82C710_STATUS (ct82c710_iores.start + 1) 44 45 static struct serio *ct82c710_port; 46 static struct platform_device *ct82c710_device; 47 static struct resource ct82c710_iores; 48 49 /* 50 * Interrupt handler for the 82C710 mouse port. A character 51 * is waiting in the 82C710. 52 */ 53 54 static irqreturn_t ct82c710_interrupt(int cpl, void *dev_id) 55 { 56 return serio_interrupt(ct82c710_port, inb(CT82C710_DATA), 0); 57 } 58 59 /* 60 * Wait for device to send output char and flush any input char. 61 */ 62 63 static int ct82c170_wait(void) 64 { 65 int timeout = 60000; 66 67 while ((inb(CT82C710_STATUS) & (CT82C710_RX_FULL | CT82C710_TX_IDLE | CT82C710_DEV_IDLE)) 68 != (CT82C710_DEV_IDLE | CT82C710_TX_IDLE) && timeout) { 69 70 if (inb_p(CT82C710_STATUS) & CT82C710_RX_FULL) inb_p(CT82C710_DATA); 71 72 udelay(1); 73 timeout--; 74 } 75 76 return !timeout; 77 } 78 79 static void ct82c710_close(struct serio *serio) 80 { 81 if (ct82c170_wait()) 82 printk(KERN_WARNING "ct82c710.c: Device busy in close()\n"); 83 84 outb_p(inb_p(CT82C710_STATUS) & ~(CT82C710_ENABLE | CT82C710_INTS_ON), CT82C710_STATUS); 85 86 if (ct82c170_wait()) 87 printk(KERN_WARNING "ct82c710.c: Device busy in close()\n"); 88 89 free_irq(CT82C710_IRQ, NULL); 90 } 91 92 static int ct82c710_open(struct serio *serio) 93 { 94 unsigned char status; 95 int err; 96 97 err = request_irq(CT82C710_IRQ, ct82c710_interrupt, 0, "ct82c710", NULL); 98 if (err) 99 return err; 100 101 status = inb_p(CT82C710_STATUS); 102 103 status |= (CT82C710_ENABLE | CT82C710_RESET); 104 outb_p(status, CT82C710_STATUS); 105 106 status &= ~(CT82C710_RESET); 107 outb_p(status, CT82C710_STATUS); 108 109 status |= CT82C710_INTS_ON; 110 outb_p(status, CT82C710_STATUS); /* Enable interrupts */ 111 112 while (ct82c170_wait()) { 113 printk(KERN_ERR "ct82c710: Device busy in open()\n"); 114 status &= ~(CT82C710_ENABLE | CT82C710_INTS_ON); 115 outb_p(status, CT82C710_STATUS); 116 free_irq(CT82C710_IRQ, NULL); 117 return -EBUSY; 118 } 119 120 return 0; 121 } 122 123 /* 124 * Write to the 82C710 mouse device. 125 */ 126 127 static int ct82c710_write(struct serio *port, unsigned char c) 128 { 129 if (ct82c170_wait()) return -1; 130 outb_p(c, CT82C710_DATA); 131 return 0; 132 } 133 134 /* 135 * See if we can find a 82C710 device. Read mouse address. 136 */ 137 138 static int __init ct82c710_detect(void) 139 { 140 outb_p(0x55, 0x2fa); /* Any value except 9, ff or 36 */ 141 outb_p(0xaa, 0x3fa); /* Inverse of 55 */ 142 outb_p(0x36, 0x3fa); /* Address the chip */ 143 outb_p(0xe4, 0x3fa); /* 390/4; 390 = config address */ 144 outb_p(0x1b, 0x2fa); /* Inverse of e4 */ 145 outb_p(0x0f, 0x390); /* Write index */ 146 if (inb_p(0x391) != 0xe4) /* Config address found? */ 147 return -ENODEV; /* No: no 82C710 here */ 148 149 outb_p(0x0d, 0x390); /* Write index */ 150 ct82c710_iores.start = inb_p(0x391) << 2; /* Get mouse I/O address */ 151 ct82c710_iores.end = ct82c710_iores.start + 1; 152 ct82c710_iores.flags = IORESOURCE_IO; 153 outb_p(0x0f, 0x390); 154 outb_p(0x0f, 0x391); /* Close config mode */ 155 156 return 0; 157 } 158 159 static int ct82c710_probe(struct platform_device *dev) 160 { 161 ct82c710_port = kzalloc(sizeof(struct serio), GFP_KERNEL); 162 if (!ct82c710_port) 163 return -ENOMEM; 164 165 ct82c710_port->id.type = SERIO_8042; 166 ct82c710_port->dev.parent = &dev->dev; 167 ct82c710_port->open = ct82c710_open; 168 ct82c710_port->close = ct82c710_close; 169 ct82c710_port->write = ct82c710_write; 170 strscpy(ct82c710_port->name, "C&T 82c710 mouse port", 171 sizeof(ct82c710_port->name)); 172 snprintf(ct82c710_port->phys, sizeof(ct82c710_port->phys), 173 "isa%16llx/serio0", (unsigned long long)CT82C710_DATA); 174 175 serio_register_port(ct82c710_port); 176 177 printk(KERN_INFO "serio: C&T 82c710 mouse port at %#llx irq %d\n", 178 (unsigned long long)CT82C710_DATA, CT82C710_IRQ); 179 180 return 0; 181 } 182 183 static void ct82c710_remove(struct platform_device *dev) 184 { 185 serio_unregister_port(ct82c710_port); 186 } 187 188 static struct platform_driver ct82c710_driver = { 189 .driver = { 190 .name = "ct82c710", 191 }, 192 .probe = ct82c710_probe, 193 .remove_new = ct82c710_remove, 194 }; 195 196 197 static int __init ct82c710_init(void) 198 { 199 int error; 200 201 error = ct82c710_detect(); 202 if (error) 203 return error; 204 205 error = platform_driver_register(&ct82c710_driver); 206 if (error) 207 return error; 208 209 ct82c710_device = platform_device_alloc("ct82c710", -1); 210 if (!ct82c710_device) { 211 error = -ENOMEM; 212 goto err_unregister_driver; 213 } 214 215 error = platform_device_add_resources(ct82c710_device, &ct82c710_iores, 1); 216 if (error) 217 goto err_free_device; 218 219 error = platform_device_add(ct82c710_device); 220 if (error) 221 goto err_free_device; 222 223 return 0; 224 225 err_free_device: 226 platform_device_put(ct82c710_device); 227 err_unregister_driver: 228 platform_driver_unregister(&ct82c710_driver); 229 return error; 230 } 231 232 static void __exit ct82c710_exit(void) 233 { 234 platform_device_unregister(ct82c710_device); 235 platform_driver_unregister(&ct82c710_driver); 236 } 237 238 module_init(ct82c710_init); 239 module_exit(ct82c710_exit); 240