1# 2# Input core configuration 3# 4config SERIO 5 tristate "Serial I/O support" 6 default y 7 help 8 Say Yes here if you have any input device that uses serial I/O to 9 communicate with the system. This includes the 10 * standard AT keyboard and PS/2 mouse * 11 as well as serial mice, Sun keyboards, some joysticks and 6dof 12 devices and more. 13 14 If unsure, say Y. 15 16 To compile this driver as a module, choose M here: the 17 module will be called serio. 18 19config ARCH_MIGHT_HAVE_PC_SERIO 20 bool 21 help 22 Select this config option from the architecture Kconfig if 23 the architecture might use a PC serio device (i8042) to 24 communicate with keyboard, mouse, etc. 25 26if SERIO 27 28config SERIO_I8042 29 tristate "i8042 PC Keyboard controller" 30 default y 31 depends on ARCH_MIGHT_HAVE_PC_SERIO 32 help 33 i8042 is the chip over which the standard AT keyboard and PS/2 34 mouse are connected to the computer. If you use these devices, 35 you'll need to say Y here. 36 37 If unsure, say Y. 38 39 To compile this driver as a module, choose M here: the 40 module will be called i8042. 41 42config SERIO_SERPORT 43 tristate "Serial port line discipline" 44 default y 45 depends on TTY 46 help 47 Say Y here if you plan to use an input device (mouse, joystick, 48 tablet, 6dof) that communicates over the RS232 serial (COM) port. 49 50 More information is available: <file:Documentation/input/input.txt> 51 52 If unsure, say Y. 53 54 To compile this driver as a module, choose M here: the 55 module will be called serport. 56 57config SERIO_CT82C710 58 tristate "ct82c710 Aux port controller" 59 depends on X86 60 help 61 Say Y here if you have a Texas Instruments TravelMate notebook 62 equipped with the ct82c710 chip and want to use a mouse connected 63 to the "QuickPort". 64 65 If unsure, say N. 66 67 To compile this driver as a module, choose M here: the 68 module will be called ct82c710. 69 70config SERIO_Q40KBD 71 tristate "Q40 keyboard controller" 72 depends on Q40 73 74config SERIO_PARKBD 75 tristate "Parallel port keyboard adapter" 76 depends on PARPORT 77 help 78 Say Y here if you built a simple parallel port adapter to attach 79 an additional AT keyboard, XT keyboard or PS/2 mouse. 80 81 More information is available: <file:Documentation/input/input.txt> 82 83 If unsure, say N. 84 85 To compile this driver as a module, choose M here: the 86 module will be called parkbd. 87 88config SERIO_RPCKBD 89 tristate "Acorn RiscPC keyboard controller" 90 depends on ARCH_ACORN 91 default y 92 help 93 Say Y here if you have the Acorn RiscPC and want to use an AT 94 keyboard connected to its keyboard controller. 95 96 To compile this driver as a module, choose M here: the 97 module will be called rpckbd. 98 99config SERIO_AT32PSIF 100 tristate "AVR32 PSIF PS/2 keyboard and mouse controller" 101 depends on AVR32 102 help 103 Say Y here if you want to use the PSIF peripheral on AVR32 devices 104 and connect a PS/2 keyboard and/or mouse to it. 105 106 To compile this driver as a module, choose M here: the module will 107 be called at32psif. 108 109config SERIO_AMBAKMI 110 tristate "AMBA KMI keyboard controller" 111 depends on ARM_AMBA 112 113config SERIO_SA1111 114 tristate "Intel SA1111 keyboard controller" 115 depends on SA1111 116 117config SERIO_GSCPS2 118 tristate "HP GSC PS/2 keyboard and PS/2 mouse controller" 119 depends on GSC 120 default y 121 help 122 This driver provides support for the PS/2 ports on PA-RISC machines 123 over which HP PS/2 keyboards and PS/2 mice may be connected. 124 If you use these devices, you'll need to say Y here. 125 126 It's safe to enable this driver, so if unsure, say Y. 127 128 To compile this driver as a module, choose M here: the 129 module will be called gscps2. 130 131config HP_SDC 132 tristate "HP System Device Controller i8042 Support" 133 depends on (GSC || HP300) && SERIO 134 default y 135 help 136 This option enables support for the "System Device 137 Controller", an i8042 carrying microcode to manage a 138 few miscellaneous devices on some Hewlett Packard systems. 139 The SDC itself contains a 10ms resolution timer/clock capable 140 of delivering interrupts on a periodic and one-shot basis. 141 The SDC may also be connected to a battery-backed real-time 142 clock, a basic audio waveform generator, and an HP-HIL Master 143 Link Controller serving up to seven input devices. 144 145 By itself this option is rather useless, but enabling it will 146 enable selection of drivers for the abovementioned devices. 147 It is, however, incompatible with the old, reliable HIL keyboard 148 driver, and the new HIL driver is experimental, so if you plan 149 to use a HIL keyboard as your primary keyboard, you may wish 150 to keep using that driver until the new HIL drivers have had 151 more testing. 152 153config HIL_MLC 154 tristate "HIL MLC Support (needed for HIL input devices)" 155 depends on HP_SDC 156 157config SERIO_PCIPS2 158 tristate "PCI PS/2 keyboard and PS/2 mouse controller" 159 depends on PCI 160 help 161 Say Y here if you have a Mobility Docking station with PS/2 162 keyboard and mice ports. 163 164 To compile this driver as a module, choose M here: the 165 module will be called pcips2. 166 167config SERIO_MACEPS2 168 tristate "SGI O2 MACE PS/2 controller" 169 depends on SGI_IP32 170 help 171 Say Y here if you have SGI O2 workstation and want to use its 172 PS/2 ports. 173 174 To compile this driver as a module, choose M here: the 175 module will be called maceps2. 176 177config SERIO_LIBPS2 178 tristate "PS/2 driver library" 179 depends on SERIO_I8042 || SERIO_I8042=n 180 help 181 Say Y here if you are using a driver for device connected 182 to a PS/2 port, such as PS/2 mouse or standard AT keyboard. 183 184 To compile this driver as a module, choose M here: the 185 module will be called libps2. 186 187config SERIO_RAW 188 tristate "Raw access to serio ports" 189 help 190 Say Y here if you want to have raw access to serio ports, such as 191 AUX ports on i8042 keyboard controller. Each serio port that is 192 bound to this driver will be accessible via a char device with 193 major 10 and dynamically allocated minor. The driver will try 194 allocating minor 1 (that historically corresponds to /dev/psaux) 195 first. To bind this driver to a serio port use sysfs interface: 196 197 echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl 198 199 To compile this driver as a module, choose M here: the 200 module will be called serio_raw. 201 202config SERIO_XILINX_XPS_PS2 203 tristate "Xilinx XPS PS/2 Controller Support" 204 depends on PPC || MICROBLAZE 205 help 206 This driver supports XPS PS/2 IP from the Xilinx EDK on 207 PowerPC platform. 208 209 To compile this driver as a module, choose M here: the 210 module will be called xilinx_ps2. 211 212config SERIO_ALTERA_PS2 213 tristate "Altera UP PS/2 controller" 214 depends on HAS_IOMEM 215 help 216 Say Y here if you have Altera University Program PS/2 ports. 217 218 To compile this driver as a module, choose M here: the 219 module will be called altera_ps2. 220 221config SERIO_AMS_DELTA 222 tristate "Amstrad Delta (E3) mailboard support" 223 depends on MACH_AMS_DELTA 224 default y 225 ---help--- 226 Say Y here if you have an E3 and want to use its mailboard, 227 or any standard AT keyboard connected to the mailboard port. 228 229 When used for the E3 mailboard, a non-standard key table 230 must be loaded from userspace, possibly using udev extras 231 provided keymap helper utility. 232 233 To compile this driver as a module, choose M here; 234 the module will be called ams_delta_serio. 235 236config SERIO_PS2MULT 237 tristate "TQC PS/2 multiplexer" 238 help 239 Say Y here if you have the PS/2 line multiplexer like the one 240 present on TQC boards. 241 242 To compile this driver as a module, choose M here: the 243 module will be called ps2mult. 244 245config SERIO_ARC_PS2 246 tristate "ARC PS/2 support" 247 depends on HAS_IOMEM 248 help 249 Say Y here if you have an ARC FPGA platform with a PS/2 250 controller in it. 251 252 To compile this driver as a module, choose M here; the module 253 will be called arc_ps2. 254 255config SERIO_APBPS2 256 tristate "GRLIB APBPS2 PS/2 keyboard/mouse controller" 257 depends on OF 258 help 259 Say Y here if you want support for GRLIB APBPS2 peripherals used 260 to connect to PS/2 keyboard and/or mouse. 261 262 To compile this driver as a module, choose M here: the module will 263 be called apbps2. 264 265config SERIO_OLPC_APSP 266 tristate "OLPC AP-SP input support" 267 depends on OLPC || COMPILE_TEST 268 help 269 Say Y here if you want support for the keyboard and touchpad included 270 in the OLPC XO-1.75 and XO-4 laptops. 271 272 To compile this driver as a module, choose M here: the module will 273 be called olpc_apsp. 274 275config HYPERV_KEYBOARD 276 tristate "Microsoft Synthetic Keyboard driver" 277 depends on HYPERV 278 default HYPERV 279 help 280 Select this option to enable the Hyper-V Keyboard driver. 281 282 To compile this driver as a module, choose M here: the module will 283 be called hyperv_keyboard. 284 285config SERIO_SUN4I_PS2 286 tristate "Allwinner A10 PS/2 controller support" 287 depends on ARCH_SUNXI || COMPILE_TEST 288 help 289 This selects support for the PS/2 Host Controller on 290 Allwinner A10. 291 292 To compile this driver as a module, choose M here: the 293 module will be called sun4i-ps2. 294 295endif 296