1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Copyright (c) 2011-2016 Synaptics Incorporated 4 * Copyright (c) 2011 Unixphere 5 */ 6 7 #ifndef _RMI_BUS_H 8 #define _RMI_BUS_H 9 10 #include <linux/rmi.h> 11 12 struct rmi_device; 13 14 /* 15 * The interrupt source count in the function descriptor can represent up to 16 * 6 interrupt sources in the normal manner. 17 */ 18 #define RMI_FN_MAX_IRQS 6 19 20 /** 21 * struct rmi_function - represents the implementation of an RMI4 22 * function for a particular device (basically, a driver for that RMI4 function) 23 * 24 * @fd: The function descriptor of the RMI function 25 * @rmi_dev: Pointer to the RMI device associated with this function container 26 * @dev: The device associated with this particular function. 27 * 28 * @num_of_irqs: The number of irqs needed by this function 29 * @irq_pos: The position in the irq bitfield this function holds 30 * @irq_mask: For convenience, can be used to mask IRQ bits off during ATTN 31 * interrupt handling. 32 * @irqs: assigned virq numbers (up to num_of_irqs) 33 * 34 * @node: entry in device's list of functions 35 */ 36 struct rmi_function { 37 struct rmi_function_descriptor fd; 38 struct rmi_device *rmi_dev; 39 struct device dev; 40 struct list_head node; 41 42 unsigned int num_of_irqs; 43 int irq[RMI_FN_MAX_IRQS]; 44 unsigned int irq_pos; 45 unsigned long irq_mask[]; 46 }; 47 48 #define to_rmi_function(d) container_of(d, struct rmi_function, dev) 49 50 bool rmi_is_function_device(struct device *dev); 51 52 int __must_check rmi_register_function(struct rmi_function *); 53 void rmi_unregister_function(struct rmi_function *); 54 55 /** 56 * struct rmi_function_handler - driver routines for a particular RMI function. 57 * 58 * @func: The RMI function number 59 * @reset: Called when a reset of the touch sensor is detected. The routine 60 * should perform any out-of-the-ordinary reset handling that might be 61 * necessary. Restoring of touch sensor configuration registers should be 62 * handled in the config() callback, below. 63 * @config: Called when the function container is first initialized, and 64 * after a reset is detected. This routine should write any necessary 65 * configuration settings to the device. 66 * @attention: Called when the IRQ(s) for the function are set by the touch 67 * sensor. 68 * @suspend: Should perform any required operations to suspend the particular 69 * function. 70 * @resume: Should perform any required operations to resume the particular 71 * function. 72 * 73 * All callbacks are expected to return 0 on success, error code on failure. 74 */ 75 struct rmi_function_handler { 76 struct device_driver driver; 77 78 u8 func; 79 80 int (*probe)(struct rmi_function *fn); 81 void (*remove)(struct rmi_function *fn); 82 int (*config)(struct rmi_function *fn); 83 int (*reset)(struct rmi_function *fn); 84 irqreturn_t (*attention)(int irq, void *ctx); 85 int (*suspend)(struct rmi_function *fn); 86 int (*resume)(struct rmi_function *fn); 87 }; 88 89 #define to_rmi_function_handler(d) \ 90 container_of_const(d, struct rmi_function_handler, driver) 91 92 int __must_check __rmi_register_function_handler(struct rmi_function_handler *, 93 struct module *, const char *); 94 #define rmi_register_function_handler(handler) \ 95 __rmi_register_function_handler(handler, THIS_MODULE, KBUILD_MODNAME) 96 97 void rmi_unregister_function_handler(struct rmi_function_handler *); 98 99 #define to_rmi_driver(d) \ 100 container_of(d, struct rmi_driver, driver) 101 102 #define to_rmi_device(d) container_of(d, struct rmi_device, dev) 103 104 static inline struct rmi_device_platform_data * 105 rmi_get_platform_data(struct rmi_device *d) 106 { 107 return &d->xport->pdata; 108 } 109 110 bool rmi_is_physical_device(struct device *dev); 111 112 /** 113 * rmi_reset - reset a RMI4 device 114 * @d: Pointer to an RMI device 115 * 116 * Calls for a reset of each function implemented by a specific device. 117 * Returns 0 on success or a negative error code. 118 */ 119 static inline int rmi_reset(struct rmi_device *d) 120 { 121 return d->driver->reset_handler(d); 122 } 123 124 /** 125 * rmi_read - read a single byte 126 * @d: Pointer to an RMI device 127 * @addr: The address to read from 128 * @buf: The read buffer 129 * 130 * Reads a single byte of data using the underlying transport protocol 131 * into memory pointed by @buf. It returns 0 on success or a negative 132 * error code. 133 */ 134 static inline int rmi_read(struct rmi_device *d, u16 addr, u8 *buf) 135 { 136 return d->xport->ops->read_block(d->xport, addr, buf, 1); 137 } 138 139 /** 140 * rmi_read_block - read a block of bytes 141 * @d: Pointer to an RMI device 142 * @addr: The start address to read from 143 * @buf: The read buffer 144 * @len: Length of the read buffer 145 * 146 * Reads a block of byte data using the underlying transport protocol 147 * into memory pointed by @buf. It returns 0 on success or a negative 148 * error code. 149 */ 150 static inline int rmi_read_block(struct rmi_device *d, u16 addr, 151 void *buf, size_t len) 152 { 153 return d->xport->ops->read_block(d->xport, addr, buf, len); 154 } 155 156 /** 157 * rmi_write - write a single byte 158 * @d: Pointer to an RMI device 159 * @addr: The address to write to 160 * @data: The data to write 161 * 162 * Writes a single byte using the underlying transport protocol. It 163 * returns zero on success or a negative error code. 164 */ 165 static inline int rmi_write(struct rmi_device *d, u16 addr, u8 data) 166 { 167 return d->xport->ops->write_block(d->xport, addr, &data, 1); 168 } 169 170 /** 171 * rmi_write_block - write a block of bytes 172 * @d: Pointer to an RMI device 173 * @addr: The start address to write to 174 * @buf: The write buffer 175 * @len: Length of the write buffer 176 * 177 * Writes a block of byte data from buf using the underlaying transport 178 * protocol. It returns the amount of bytes written or a negative error code. 179 */ 180 static inline int rmi_write_block(struct rmi_device *d, u16 addr, 181 const void *buf, size_t len) 182 { 183 return d->xport->ops->write_block(d->xport, addr, buf, len); 184 } 185 186 int rmi_for_each_dev(void *data, int (*func)(struct device *dev, void *data)); 187 188 extern const struct bus_type rmi_bus_type; 189 190 int rmi_of_property_read_u32(struct device *dev, u32 *result, 191 const char *prop, bool optional); 192 193 #define RMI_DEBUG_CORE BIT(0) 194 #define RMI_DEBUG_XPORT BIT(1) 195 #define RMI_DEBUG_FN BIT(2) 196 #define RMI_DEBUG_2D_SENSOR BIT(3) 197 198 void rmi_dbg(int flags, struct device *dev, const char *fmt, ...); 199 #endif 200