1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (c) 1999-2001 Vojtech Pavlik 4 * 5 * Based on the work of: 6 * James Banks Matthew Dillon 7 * David Giller Nathan Laredo 8 * Linus Torvalds Johan Myreen 9 * Cliff Matthews Philip Blundell 10 * Russell King 11 */ 12 13 /* 14 * Logitech Bus Mouse Driver for Linux 15 */ 16 17 /* 18 */ 19 20 #include <linux/module.h> 21 #include <linux/delay.h> 22 #include <linux/ioport.h> 23 #include <linux/init.h> 24 #include <linux/input.h> 25 #include <linux/interrupt.h> 26 27 #include <asm/io.h> 28 #include <asm/irq.h> 29 30 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); 31 MODULE_DESCRIPTION("Logitech busmouse driver"); 32 MODULE_LICENSE("GPL"); 33 34 #define LOGIBM_BASE 0x23c 35 #define LOGIBM_EXTENT 4 36 37 #define LOGIBM_DATA_PORT LOGIBM_BASE + 0 38 #define LOGIBM_SIGNATURE_PORT LOGIBM_BASE + 1 39 #define LOGIBM_CONTROL_PORT LOGIBM_BASE + 2 40 #define LOGIBM_CONFIG_PORT LOGIBM_BASE + 3 41 42 #define LOGIBM_ENABLE_IRQ 0x00 43 #define LOGIBM_DISABLE_IRQ 0x10 44 #define LOGIBM_READ_X_LOW 0x80 45 #define LOGIBM_READ_X_HIGH 0xa0 46 #define LOGIBM_READ_Y_LOW 0xc0 47 #define LOGIBM_READ_Y_HIGH 0xe0 48 49 #define LOGIBM_DEFAULT_MODE 0x90 50 #define LOGIBM_CONFIG_BYTE 0x91 51 #define LOGIBM_SIGNATURE_BYTE 0xa5 52 53 #define LOGIBM_IRQ 5 54 55 static int logibm_irq = LOGIBM_IRQ; 56 module_param_hw_named(irq, logibm_irq, uint, irq, 0); 57 MODULE_PARM_DESC(irq, "IRQ number (5=default)"); 58 59 static struct input_dev *logibm_dev; 60 61 static irqreturn_t logibm_interrupt(int irq, void *dev_id) 62 { 63 char dx, dy; 64 unsigned char buttons; 65 66 outb(LOGIBM_READ_X_LOW, LOGIBM_CONTROL_PORT); 67 dx = (inb(LOGIBM_DATA_PORT) & 0xf); 68 outb(LOGIBM_READ_X_HIGH, LOGIBM_CONTROL_PORT); 69 dx |= (inb(LOGIBM_DATA_PORT) & 0xf) << 4; 70 outb(LOGIBM_READ_Y_LOW, LOGIBM_CONTROL_PORT); 71 dy = (inb(LOGIBM_DATA_PORT) & 0xf); 72 outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT); 73 buttons = inb(LOGIBM_DATA_PORT); 74 dy |= (buttons & 0xf) << 4; 75 buttons = ~buttons >> 5; 76 77 input_report_rel(logibm_dev, REL_X, dx); 78 input_report_rel(logibm_dev, REL_Y, dy); 79 input_report_key(logibm_dev, BTN_RIGHT, buttons & 1); 80 input_report_key(logibm_dev, BTN_MIDDLE, buttons & 2); 81 input_report_key(logibm_dev, BTN_LEFT, buttons & 4); 82 input_sync(logibm_dev); 83 84 outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); 85 return IRQ_HANDLED; 86 } 87 88 static int logibm_open(struct input_dev *dev) 89 { 90 if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) { 91 printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); 92 return -EBUSY; 93 } 94 outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); 95 return 0; 96 } 97 98 static void logibm_close(struct input_dev *dev) 99 { 100 outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); 101 free_irq(logibm_irq, NULL); 102 } 103 104 static int __init logibm_init(void) 105 { 106 int err; 107 108 if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) { 109 printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE); 110 return -EBUSY; 111 } 112 113 outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT); 114 outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT); 115 udelay(100); 116 117 if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) { 118 printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE); 119 err = -ENODEV; 120 goto err_release_region; 121 } 122 123 outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT); 124 outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); 125 126 logibm_dev = input_allocate_device(); 127 if (!logibm_dev) { 128 printk(KERN_ERR "logibm.c: Not enough memory for input device\n"); 129 err = -ENOMEM; 130 goto err_release_region; 131 } 132 133 logibm_dev->name = "Logitech bus mouse"; 134 logibm_dev->phys = "isa023c/input0"; 135 logibm_dev->id.bustype = BUS_ISA; 136 logibm_dev->id.vendor = 0x0003; 137 logibm_dev->id.product = 0x0001; 138 logibm_dev->id.version = 0x0100; 139 140 logibm_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); 141 logibm_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | 142 BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); 143 logibm_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); 144 145 logibm_dev->open = logibm_open; 146 logibm_dev->close = logibm_close; 147 148 err = input_register_device(logibm_dev); 149 if (err) 150 goto err_free_dev; 151 152 return 0; 153 154 err_free_dev: 155 input_free_device(logibm_dev); 156 err_release_region: 157 release_region(LOGIBM_BASE, LOGIBM_EXTENT); 158 159 return err; 160 } 161 162 static void __exit logibm_exit(void) 163 { 164 input_unregister_device(logibm_dev); 165 release_region(LOGIBM_BASE, LOGIBM_EXTENT); 166 } 167 168 module_init(logibm_init); 169 module_exit(logibm_exit); 170