xref: /linux/drivers/input/mouse/elantech.h (revision 3932b9ca55b0be314a36d3e84faff3e823c081f5)
1 /*
2  * Elantech Touchpad driver (v6)
3  *
4  * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License version 2 as published
8  * by the Free Software Foundation.
9  *
10  * Trademarks are the property of their respective owners.
11  */
12 
13 #ifndef _ELANTECH_H
14 #define _ELANTECH_H
15 
16 /*
17  * Command values for Synaptics style queries
18  */
19 #define ETP_FW_ID_QUERY			0x00
20 #define ETP_FW_VERSION_QUERY		0x01
21 #define ETP_CAPABILITIES_QUERY		0x02
22 #define ETP_SAMPLE_QUERY		0x03
23 #define ETP_RESOLUTION_QUERY		0x04
24 
25 /*
26  * Command values for register reading or writing
27  */
28 #define ETP_REGISTER_READ		0x10
29 #define ETP_REGISTER_WRITE		0x11
30 #define ETP_REGISTER_READWRITE		0x00
31 
32 /*
33  * Hardware version 2 custom PS/2 command value
34  */
35 #define ETP_PS2_CUSTOM_COMMAND		0xf8
36 
37 /*
38  * Times to retry a ps2_command and millisecond delay between tries
39  */
40 #define ETP_PS2_COMMAND_TRIES		3
41 #define ETP_PS2_COMMAND_DELAY		500
42 
43 /*
44  * Times to try to read back a register and millisecond delay between tries
45  */
46 #define ETP_READ_BACK_TRIES		5
47 #define ETP_READ_BACK_DELAY		2000
48 
49 /*
50  * Register bitmasks for hardware version 1
51  */
52 #define ETP_R10_ABSOLUTE_MODE		0x04
53 #define ETP_R11_4_BYTE_MODE		0x02
54 
55 /*
56  * Capability bitmasks
57  */
58 #define ETP_CAP_HAS_ROCKER		0x04
59 
60 /*
61  * One hard to find application note states that X axis range is 0 to 576
62  * and Y axis range is 0 to 384 for harware version 1.
63  * Edge fuzz might be necessary because of bezel around the touchpad
64  */
65 #define ETP_EDGE_FUZZ_V1		32
66 
67 #define ETP_XMIN_V1			(  0 + ETP_EDGE_FUZZ_V1)
68 #define ETP_XMAX_V1			(576 - ETP_EDGE_FUZZ_V1)
69 #define ETP_YMIN_V1			(  0 + ETP_EDGE_FUZZ_V1)
70 #define ETP_YMAX_V1			(384 - ETP_EDGE_FUZZ_V1)
71 
72 /*
73  * The resolution for older v2 hardware doubled.
74  * (newer v2's firmware provides command so we can query)
75  */
76 #define ETP_XMIN_V2			0
77 #define ETP_XMAX_V2			1152
78 #define ETP_YMIN_V2			0
79 #define ETP_YMAX_V2			768
80 
81 #define ETP_PMIN_V2			0
82 #define ETP_PMAX_V2			255
83 #define ETP_WMIN_V2			0
84 #define ETP_WMAX_V2			15
85 
86 /*
87  * v3 hardware has 2 kinds of packet types,
88  * v4 hardware has 3.
89  */
90 #define PACKET_UNKNOWN			0x01
91 #define PACKET_DEBOUNCE			0x02
92 #define PACKET_V3_HEAD			0x03
93 #define PACKET_V3_TAIL			0x04
94 #define PACKET_V4_HEAD			0x05
95 #define PACKET_V4_MOTION		0x06
96 #define PACKET_V4_STATUS		0x07
97 #define PACKET_TRACKPOINT		0x08
98 
99 /*
100  * track up to 5 fingers for v4 hardware
101  */
102 #define ETP_MAX_FINGERS			5
103 
104 /*
105  * weight value for v4 hardware
106  */
107 #define ETP_WEIGHT_VALUE		5
108 
109 /*
110  * The base position for one finger, v4 hardware
111  */
112 struct finger_pos {
113 	unsigned int x;
114 	unsigned int y;
115 };
116 
117 struct elantech_data {
118 	struct input_dev *tp_dev;	/* Relative device for trackpoint */
119 	char tp_phys[32];
120 	unsigned char reg_07;
121 	unsigned char reg_10;
122 	unsigned char reg_11;
123 	unsigned char reg_20;
124 	unsigned char reg_21;
125 	unsigned char reg_22;
126 	unsigned char reg_23;
127 	unsigned char reg_24;
128 	unsigned char reg_25;
129 	unsigned char reg_26;
130 	unsigned char debug;
131 	unsigned char capabilities[3];
132 	bool paritycheck;
133 	bool jumpy_cursor;
134 	bool reports_pressure;
135 	bool crc_enabled;
136 	bool set_hw_resolution;
137 	unsigned char hw_version;
138 	unsigned int fw_version;
139 	unsigned int single_finger_reports;
140 	unsigned int y_max;
141 	unsigned int width;
142 	struct finger_pos mt[ETP_MAX_FINGERS];
143 	unsigned char parity[256];
144 	int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
145 };
146 
147 #ifdef CONFIG_MOUSE_PS2_ELANTECH
148 int elantech_detect(struct psmouse *psmouse, bool set_properties);
149 int elantech_init(struct psmouse *psmouse);
150 #else
151 static inline int elantech_detect(struct psmouse *psmouse, bool set_properties)
152 {
153 	return -ENOSYS;
154 }
155 static inline int elantech_init(struct psmouse *psmouse)
156 {
157 	return -ENOSYS;
158 }
159 #endif /* CONFIG_MOUSE_PS2_ELANTECH */
160 
161 #endif
162