xref: /linux/drivers/input/mouse/alps.h (revision 04eeb606a8383b306f4bc6991da8231b5f3924b0)
1 /*
2  * ALPS touchpad PS/2 mouse driver
3  *
4  * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
5  * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms of the GNU General Public License version 2 as published by
9  * the Free Software Foundation.
10  */
11 
12 #ifndef _ALPS_H
13 #define _ALPS_H
14 
15 #include <linux/input/mt.h>
16 
17 #define ALPS_PROTO_V1	1
18 #define ALPS_PROTO_V2	2
19 #define ALPS_PROTO_V3	3
20 #define ALPS_PROTO_V4	4
21 #define ALPS_PROTO_V5	5
22 #define ALPS_PROTO_V6	6
23 #define ALPS_PROTO_V7	7	/* t3btl t4s */
24 
25 #define MAX_TOUCHES	2
26 
27 #define DOLPHIN_COUNT_PER_ELECTRODE	64
28 #define DOLPHIN_PROFILE_XOFFSET		8	/* x-electrode offset */
29 #define DOLPHIN_PROFILE_YOFFSET		1	/* y-electrode offset */
30 
31 /*
32  * enum V7_PACKET_ID - defines the packet type for V7
33  * V7_PACKET_ID_IDLE: There's no finger and no button activity.
34  * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad
35  *  or there's button activities.
36  * V7_PACKET_ID_MULTI: There are at least three non-resting fingers.
37  * V7_PACKET_ID_NEW: The finger position in slot is not continues from
38  *  previous packet.
39 */
40 enum V7_PACKET_ID {
41 	 V7_PACKET_ID_IDLE,
42 	 V7_PACKET_ID_TWO,
43 	 V7_PACKET_ID_MULTI,
44 	 V7_PACKET_ID_NEW,
45 	 V7_PACKET_ID_UNKNOWN,
46 };
47 
48 /**
49  * struct alps_model_info - touchpad ID table
50  * @signature: E7 response string to match.
51  * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response
52  *   (aka command mode response) identifies the firmware minor version.  This
53  *   can be used to distinguish different hardware models which are not
54  *   uniquely identifiable through their E7 responses.
55  * @proto_version: Indicates V1/V2/V3/...
56  * @byte0: Helps figure out whether a position report packet matches the
57  *   known format for this model.  The first byte of the report, ANDed with
58  *   mask0, should match byte0.
59  * @mask0: The mask used to check the first byte of the report.
60  * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
61  *
62  * Many (but not all) ALPS touchpads can be identified by looking at the
63  * values returned in the "E7 report" and/or the "EC report."  This table
64  * lists a number of such touchpads.
65  */
66 struct alps_model_info {
67 	unsigned char signature[3];
68 	unsigned char command_mode_resp;
69 	unsigned char proto_version;
70 	unsigned char byte0, mask0;
71 	int flags;
72 };
73 
74 /**
75  * struct alps_nibble_commands - encodings for register accesses
76  * @command: PS/2 command used for the nibble
77  * @data: Data supplied as an argument to the PS/2 command, if applicable
78  *
79  * The ALPS protocol uses magic sequences to transmit binary data to the
80  * touchpad, as it is generally not OK to send arbitrary bytes out the
81  * PS/2 port.  Each of the sequences in this table sends one nibble of the
82  * register address or (write) data.  Different versions of the ALPS protocol
83  * use slightly different encodings.
84  */
85 struct alps_nibble_commands {
86 	int command;
87 	unsigned char data;
88 };
89 
90 struct alps_bitmap_point {
91 	int start_bit;
92 	int num_bits;
93 };
94 
95 /**
96  * struct alps_fields - decoded version of the report packet
97  * @x_map: Bitmap of active X positions for MT.
98  * @y_map: Bitmap of active Y positions for MT.
99  * @fingers: Number of fingers for MT.
100  * @pressure: Pressure.
101  * @st: position for ST.
102  * @mt: position for MT.
103  * @first_mp: Packet is the first of a multi-packet report.
104  * @is_mp: Packet is part of a multi-packet report.
105  * @left: Left touchpad button is active.
106  * @right: Right touchpad button is active.
107  * @middle: Middle touchpad button is active.
108  * @ts_left: Left trackstick button is active.
109  * @ts_right: Right trackstick button is active.
110  * @ts_middle: Middle trackstick button is active.
111  */
112 struct alps_fields {
113 	unsigned int x_map;
114 	unsigned int y_map;
115 	unsigned int fingers;
116 
117 	int pressure;
118 	struct input_mt_pos st;
119 	struct input_mt_pos mt[MAX_TOUCHES];
120 
121 	unsigned int first_mp:1;
122 	unsigned int is_mp:1;
123 
124 	unsigned int left:1;
125 	unsigned int right:1;
126 	unsigned int middle:1;
127 
128 	unsigned int ts_left:1;
129 	unsigned int ts_right:1;
130 	unsigned int ts_middle:1;
131 };
132 
133 /**
134  * struct alps_data - private data structure for the ALPS driver
135  * @dev2: "Relative" device used to report trackstick or mouse activity.
136  * @phys: Physical path for the relative device.
137  * @nibble_commands: Command mapping used for touchpad register accesses.
138  * @addr_command: Command used to tell the touchpad that a register address
139  *   follows.
140  * @proto_version: Indicates V1/V2/V3/...
141  * @byte0: Helps figure out whether a position report packet matches the
142  *   known format for this model.  The first byte of the report, ANDed with
143  *   mask0, should match byte0.
144  * @mask0: The mask used to check the first byte of the report.
145  * @fw_ver: cached copy of firmware version (EC report)
146  * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
147  * @x_max: Largest possible X position value.
148  * @y_max: Largest possible Y position value.
149  * @x_bits: Number of X bits in the MT bitmap.
150  * @y_bits: Number of Y bits in the MT bitmap.
151  * @hw_init: Protocol-specific hardware init function.
152  * @process_packet: Protocol-specific function to process a report packet.
153  * @decode_fields: Protocol-specific function to read packet bitfields.
154  * @set_abs_params: Protocol-specific function to configure the input_dev.
155  * @prev_fin: Finger bit from previous packet.
156  * @multi_packet: Multi-packet data in progress.
157  * @multi_data: Saved multi-packet data.
158  * @f: Decoded packet data fields.
159  * @quirks: Bitmap of ALPS_QUIRK_*.
160  * @timer: Timer for flushing out the final report packet in the stream.
161  */
162 struct alps_data {
163 	struct input_dev *dev2;
164 	char phys[32];
165 
166 	/* these are autodetected when the device is identified */
167 	const struct alps_nibble_commands *nibble_commands;
168 	int addr_command;
169 	unsigned char proto_version;
170 	unsigned char byte0, mask0;
171 	unsigned char fw_ver[3];
172 	int flags;
173 	int x_max;
174 	int y_max;
175 	int x_bits;
176 	int y_bits;
177 	unsigned int x_res;
178 	unsigned int y_res;
179 
180 	int (*hw_init)(struct psmouse *psmouse);
181 	void (*process_packet)(struct psmouse *psmouse);
182 	int (*decode_fields)(struct alps_fields *f, unsigned char *p,
183 			      struct psmouse *psmouse);
184 	void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
185 
186 	int prev_fin;
187 	int multi_packet;
188 	unsigned char multi_data[6];
189 	struct alps_fields f;
190 	u8 quirks;
191 	struct timer_list timer;
192 };
193 
194 #define ALPS_QUIRK_TRACKSTICK_BUTTONS	1 /* trakcstick buttons in trackstick packet */
195 
196 #ifdef CONFIG_MOUSE_PS2_ALPS
197 int alps_detect(struct psmouse *psmouse, bool set_properties);
198 int alps_init(struct psmouse *psmouse);
199 #else
200 inline int alps_detect(struct psmouse *psmouse, bool set_properties)
201 {
202 	return -ENOSYS;
203 }
204 inline int alps_init(struct psmouse *psmouse)
205 {
206 	return -ENOSYS;
207 }
208 #endif /* CONFIG_MOUSE_PS2_ALPS */
209 
210 #endif
211