1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * DRV2665 haptics driver family 4 * 5 * Author: Dan Murphy <dmurphy@ti.com> 6 * 7 * Copyright: (C) 2015 Texas Instruments, Inc. 8 */ 9 10 #include <linux/i2c.h> 11 #include <linux/input.h> 12 #include <linux/module.h> 13 #include <linux/regmap.h> 14 #include <linux/slab.h> 15 #include <linux/delay.h> 16 #include <linux/regulator/consumer.h> 17 18 /* Control registers */ 19 #define DRV2665_STATUS 0x00 20 #define DRV2665_CTRL_1 0x01 21 #define DRV2665_CTRL_2 0x02 22 #define DRV2665_FIFO 0x0b 23 24 /* Status Register */ 25 #define DRV2665_FIFO_FULL BIT(0) 26 #define DRV2665_FIFO_EMPTY BIT(1) 27 28 /* Control 1 Register */ 29 #define DRV2665_25_VPP_GAIN 0x00 30 #define DRV2665_50_VPP_GAIN 0x01 31 #define DRV2665_75_VPP_GAIN 0x02 32 #define DRV2665_100_VPP_GAIN 0x03 33 #define DRV2665_DIGITAL_IN 0xfc 34 #define DRV2665_ANALOG_IN BIT(2) 35 36 /* Control 2 Register */ 37 #define DRV2665_BOOST_EN BIT(1) 38 #define DRV2665_STANDBY BIT(6) 39 #define DRV2665_DEV_RST BIT(7) 40 #define DRV2665_5_MS_IDLE_TOUT 0x00 41 #define DRV2665_10_MS_IDLE_TOUT 0x04 42 #define DRV2665_15_MS_IDLE_TOUT 0x08 43 #define DRV2665_20_MS_IDLE_TOUT 0x0c 44 45 /** 46 * struct drv2665_data - 47 * @input_dev: Pointer to the input device 48 * @client: Pointer to the I2C client 49 * @regmap: Register map of the device 50 * @work: Work item used to off load the enable/disable of the vibration 51 * @regulator: Pointer to the regulator for the IC 52 */ 53 struct drv2665_data { 54 struct input_dev *input_dev; 55 struct i2c_client *client; 56 struct regmap *regmap; 57 struct work_struct work; 58 struct regulator *regulator; 59 }; 60 61 /* 8kHz Sine wave to stream to the FIFO */ 62 static const u8 drv2665_sine_wave_form[] = { 63 0x00, 0x10, 0x20, 0x2e, 0x3c, 0x48, 0x53, 0x5b, 0x61, 0x65, 0x66, 64 0x65, 0x61, 0x5b, 0x53, 0x48, 0x3c, 0x2e, 0x20, 0x10, 65 0x00, 0xf0, 0xe0, 0xd2, 0xc4, 0xb8, 0xad, 0xa5, 0x9f, 0x9b, 0x9a, 66 0x9b, 0x9f, 0xa5, 0xad, 0xb8, 0xc4, 0xd2, 0xe0, 0xf0, 0x00, 67 }; 68 69 static const struct reg_default drv2665_reg_defs[] = { 70 { DRV2665_STATUS, 0x02 }, 71 { DRV2665_CTRL_1, 0x28 }, 72 { DRV2665_CTRL_2, 0x40 }, 73 { DRV2665_FIFO, 0x00 }, 74 }; 75 76 static void drv2665_worker(struct work_struct *work) 77 { 78 struct drv2665_data *haptics = 79 container_of(work, struct drv2665_data, work); 80 unsigned int read_buf; 81 int error; 82 83 error = regmap_read(haptics->regmap, DRV2665_STATUS, &read_buf); 84 if (error) { 85 dev_err(&haptics->client->dev, 86 "Failed to read status: %d\n", error); 87 return; 88 } 89 90 if (read_buf & DRV2665_FIFO_EMPTY) { 91 error = regmap_bulk_write(haptics->regmap, 92 DRV2665_FIFO, 93 drv2665_sine_wave_form, 94 ARRAY_SIZE(drv2665_sine_wave_form)); 95 if (error) { 96 dev_err(&haptics->client->dev, 97 "Failed to write FIFO: %d\n", error); 98 return; 99 } 100 } 101 } 102 103 static int drv2665_haptics_play(struct input_dev *input, void *data, 104 struct ff_effect *effect) 105 { 106 struct drv2665_data *haptics = input_get_drvdata(input); 107 108 schedule_work(&haptics->work); 109 110 return 0; 111 } 112 113 static void drv2665_close(struct input_dev *input) 114 { 115 struct drv2665_data *haptics = input_get_drvdata(input); 116 int error; 117 118 cancel_work_sync(&haptics->work); 119 120 error = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2, 121 DRV2665_STANDBY, DRV2665_STANDBY); 122 if (error) 123 dev_err(&haptics->client->dev, 124 "Failed to enter standby mode: %d\n", error); 125 } 126 127 static const struct reg_sequence drv2665_init_regs[] = { 128 { DRV2665_CTRL_2, 0 | DRV2665_10_MS_IDLE_TOUT }, 129 { DRV2665_CTRL_1, DRV2665_25_VPP_GAIN }, 130 }; 131 132 static int drv2665_init(struct drv2665_data *haptics) 133 { 134 int error; 135 136 error = regmap_register_patch(haptics->regmap, 137 drv2665_init_regs, 138 ARRAY_SIZE(drv2665_init_regs)); 139 if (error) { 140 dev_err(&haptics->client->dev, 141 "Failed to write init registers: %d\n", 142 error); 143 return error; 144 } 145 146 return 0; 147 } 148 149 static const struct regmap_config drv2665_regmap_config = { 150 .reg_bits = 8, 151 .val_bits = 8, 152 153 .max_register = DRV2665_FIFO, 154 .reg_defaults = drv2665_reg_defs, 155 .num_reg_defaults = ARRAY_SIZE(drv2665_reg_defs), 156 .cache_type = REGCACHE_NONE, 157 }; 158 159 static int drv2665_probe(struct i2c_client *client) 160 { 161 struct drv2665_data *haptics; 162 int error; 163 164 haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL); 165 if (!haptics) 166 return -ENOMEM; 167 168 haptics->regulator = devm_regulator_get(&client->dev, "vbat"); 169 if (IS_ERR(haptics->regulator)) { 170 error = PTR_ERR(haptics->regulator); 171 dev_err(&client->dev, 172 "unable to get regulator, error: %d\n", error); 173 return error; 174 } 175 176 haptics->input_dev = devm_input_allocate_device(&client->dev); 177 if (!haptics->input_dev) { 178 dev_err(&client->dev, "Failed to allocate input device\n"); 179 return -ENOMEM; 180 } 181 182 haptics->input_dev->name = "drv2665:haptics"; 183 haptics->input_dev->dev.parent = client->dev.parent; 184 haptics->input_dev->close = drv2665_close; 185 input_set_drvdata(haptics->input_dev, haptics); 186 input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE); 187 188 error = input_ff_create_memless(haptics->input_dev, NULL, 189 drv2665_haptics_play); 190 if (error) { 191 dev_err(&client->dev, "input_ff_create() failed: %d\n", 192 error); 193 return error; 194 } 195 196 INIT_WORK(&haptics->work, drv2665_worker); 197 198 haptics->client = client; 199 i2c_set_clientdata(client, haptics); 200 201 haptics->regmap = devm_regmap_init_i2c(client, &drv2665_regmap_config); 202 if (IS_ERR(haptics->regmap)) { 203 error = PTR_ERR(haptics->regmap); 204 dev_err(&client->dev, "Failed to allocate register map: %d\n", 205 error); 206 return error; 207 } 208 209 error = drv2665_init(haptics); 210 if (error) { 211 dev_err(&client->dev, "Device init failed: %d\n", error); 212 return error; 213 } 214 215 error = input_register_device(haptics->input_dev); 216 if (error) { 217 dev_err(&client->dev, "couldn't register input device: %d\n", 218 error); 219 return error; 220 } 221 222 return 0; 223 } 224 225 static int drv2665_suspend(struct device *dev) 226 { 227 struct drv2665_data *haptics = dev_get_drvdata(dev); 228 int error; 229 230 guard(mutex)(&haptics->input_dev->mutex); 231 232 if (input_device_enabled(haptics->input_dev)) { 233 error = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2, 234 DRV2665_STANDBY, DRV2665_STANDBY); 235 if (error) { 236 dev_err(dev, "Failed to set standby mode\n"); 237 regulator_disable(haptics->regulator); 238 return error; 239 } 240 241 error = regulator_disable(haptics->regulator); 242 if (error) { 243 dev_err(dev, "Failed to disable regulator\n"); 244 regmap_update_bits(haptics->regmap, 245 DRV2665_CTRL_2, 246 DRV2665_STANDBY, 0); 247 return error; 248 } 249 } 250 251 return 0; 252 } 253 254 static int drv2665_resume(struct device *dev) 255 { 256 struct drv2665_data *haptics = dev_get_drvdata(dev); 257 int error; 258 259 guard(mutex)(&haptics->input_dev->mutex); 260 261 if (input_device_enabled(haptics->input_dev)) { 262 error = regulator_enable(haptics->regulator); 263 if (error) { 264 dev_err(dev, "Failed to enable regulator\n"); 265 return error; 266 } 267 268 error = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2, 269 DRV2665_STANDBY, 0); 270 if (error) { 271 dev_err(dev, "Failed to unset standby mode\n"); 272 regulator_disable(haptics->regulator); 273 return error; 274 } 275 276 } 277 278 return 0; 279 } 280 281 static DEFINE_SIMPLE_DEV_PM_OPS(drv2665_pm_ops, drv2665_suspend, drv2665_resume); 282 283 static const struct i2c_device_id drv2665_id[] = { 284 { "drv2665" }, 285 { } 286 }; 287 MODULE_DEVICE_TABLE(i2c, drv2665_id); 288 289 #ifdef CONFIG_OF 290 static const struct of_device_id drv2665_of_match[] = { 291 { .compatible = "ti,drv2665", }, 292 { } 293 }; 294 MODULE_DEVICE_TABLE(of, drv2665_of_match); 295 #endif 296 297 static struct i2c_driver drv2665_driver = { 298 .probe = drv2665_probe, 299 .driver = { 300 .name = "drv2665-haptics", 301 .of_match_table = of_match_ptr(drv2665_of_match), 302 .pm = pm_sleep_ptr(&drv2665_pm_ops), 303 }, 304 .id_table = drv2665_id, 305 }; 306 module_i2c_driver(drv2665_driver); 307 308 MODULE_DESCRIPTION("TI DRV2665 haptics driver"); 309 MODULE_LICENSE("GPL"); 310 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); 311