xref: /linux/drivers/input/keyboard/gpio_keys.c (revision 69050f8d6d075dc01af7a5f2f550a8067510366f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Driver for keys on GPIO lines capable of generating interrupts.
4  *
5  * Copyright 2005 Phil Blundell
6  * Copyright 2010, 2011 David Jander <david@protonic.nl>
7  */
8 
9 #include <linux/module.h>
10 
11 #include <linux/hrtimer.h>
12 #include <linux/init.h>
13 #include <linux/fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/sched.h>
17 #include <linux/pm.h>
18 #include <linux/slab.h>
19 #include <linux/sysctl.h>
20 #include <linux/proc_fs.h>
21 #include <linux/delay.h>
22 #include <linux/platform_device.h>
23 #include <linux/input.h>
24 #include <linux/gpio_keys.h>
25 #include <linux/workqueue.h>
26 #include <linux/gpio.h>
27 #include <linux/gpio/consumer.h>
28 #include <linux/of.h>
29 #include <linux/of_irq.h>
30 #include <linux/spinlock.h>
31 #include <dt-bindings/input/gpio-keys.h>
32 
33 struct gpio_button_data {
34 	const struct gpio_keys_button *button;
35 	struct input_dev *input;
36 	struct gpio_desc *gpiod;
37 
38 	unsigned short *code;
39 
40 	struct hrtimer release_timer;
41 	unsigned int release_delay;	/* in msecs, for IRQ-only buttons */
42 
43 	struct delayed_work work;
44 	struct hrtimer debounce_timer;
45 	unsigned int software_debounce;	/* in msecs, for GPIO-driven buttons */
46 
47 	unsigned int irq;
48 	unsigned int wakeirq;
49 	unsigned int wakeup_trigger_type;
50 
51 	spinlock_t lock;
52 	bool disabled;
53 	bool key_pressed;
54 	bool suspended;
55 	bool debounce_use_hrtimer;
56 };
57 
58 struct gpio_keys_drvdata {
59 	const struct gpio_keys_platform_data *pdata;
60 	struct input_dev *input;
61 	struct mutex disable_lock;
62 	unsigned short *keymap;
63 	struct gpio_button_data data[];
64 };
65 
66 /*
67  * SYSFS interface for enabling/disabling keys and switches:
68  *
69  * There are 4 attributes under /sys/devices/platform/gpio-keys/
70  *	keys [ro]              - bitmap of keys (EV_KEY) which can be
71  *	                         disabled
72  *	switches [ro]          - bitmap of switches (EV_SW) which can be
73  *	                         disabled
74  *	disabled_keys [rw]     - bitmap of keys currently disabled
75  *	disabled_switches [rw] - bitmap of switches currently disabled
76  *
77  * Userland can change these values and hence disable event generation
78  * for each key (or switch). Disabling a key means its interrupt line
79  * is disabled.
80  *
81  * For example, if we have following switches set up as gpio-keys:
82  *	SW_DOCK = 5
83  *	SW_CAMERA_LENS_COVER = 9
84  *	SW_KEYPAD_SLIDE = 10
85  *	SW_FRONT_PROXIMITY = 11
86  * This is read from switches:
87  *	11-9,5
88  * Next we want to disable proximity (11) and dock (5), we write:
89  *	11,5
90  * to file disabled_switches. Now proximity and dock IRQs are disabled.
91  * This can be verified by reading the file disabled_switches:
92  *	11,5
93  * If we now want to enable proximity (11) switch we write:
94  *	5
95  * to disabled_switches.
96  *
97  * We can disable only those keys which don't allow sharing the irq.
98  */
99 
100 /**
101  * get_n_events_by_type() - returns maximum number of events per @type
102  * @type: type of button (%EV_KEY, %EV_SW)
103  *
104  * Return value of this function can be used to allocate bitmap
105  * large enough to hold all bits for given type.
106  */
107 static int get_n_events_by_type(int type)
108 {
109 	BUG_ON(type != EV_SW && type != EV_KEY);
110 
111 	return (type == EV_KEY) ? KEY_CNT : SW_CNT;
112 }
113 
114 /**
115  * get_bm_events_by_type() - returns bitmap of supported events per @type
116  * @dev: input device from which bitmap is retrieved
117  * @type: type of button (%EV_KEY, %EV_SW)
118  *
119  * Return value of this function can be used to allocate bitmap
120  * large enough to hold all bits for given type.
121  */
122 static const unsigned long *get_bm_events_by_type(struct input_dev *dev,
123 						  int type)
124 {
125 	BUG_ON(type != EV_SW && type != EV_KEY);
126 
127 	return (type == EV_KEY) ? dev->keybit : dev->swbit;
128 }
129 
130 static void gpio_keys_quiesce_key(void *data)
131 {
132 	struct gpio_button_data *bdata = data;
133 
134 	if (!bdata->gpiod)
135 		hrtimer_cancel(&bdata->release_timer);
136 	else if (bdata->debounce_use_hrtimer)
137 		hrtimer_cancel(&bdata->debounce_timer);
138 	else
139 		cancel_delayed_work_sync(&bdata->work);
140 }
141 
142 /**
143  * gpio_keys_disable_button() - disables given GPIO button
144  * @bdata: button data for button to be disabled
145  *
146  * Disables button pointed by @bdata. This is done by masking
147  * IRQ line. After this function is called, button won't generate
148  * input events anymore. Note that one can only disable buttons
149  * that don't share IRQs.
150  *
151  * Make sure that @bdata->disable_lock is locked when entering
152  * this function to avoid races when concurrent threads are
153  * disabling buttons at the same time.
154  */
155 static void gpio_keys_disable_button(struct gpio_button_data *bdata)
156 {
157 	if (!bdata->disabled) {
158 		/*
159 		 * Disable IRQ and associated timer/work structure.
160 		 */
161 		disable_irq(bdata->irq);
162 		gpio_keys_quiesce_key(bdata);
163 		bdata->disabled = true;
164 	}
165 }
166 
167 /**
168  * gpio_keys_enable_button() - enables given GPIO button
169  * @bdata: button data for button to be disabled
170  *
171  * Enables given button pointed by @bdata.
172  *
173  * Make sure that @bdata->disable_lock is locked when entering
174  * this function to avoid races with concurrent threads trying
175  * to enable the same button at the same time.
176  */
177 static void gpio_keys_enable_button(struct gpio_button_data *bdata)
178 {
179 	if (bdata->disabled) {
180 		enable_irq(bdata->irq);
181 		bdata->disabled = false;
182 	}
183 }
184 
185 /**
186  * gpio_keys_attr_show_helper() - fill in stringified bitmap of buttons
187  * @ddata: pointer to drvdata
188  * @buf: buffer where stringified bitmap is written
189  * @type: button type (%EV_KEY, %EV_SW)
190  * @only_disabled: does caller want only those buttons that are
191  *                 currently disabled or all buttons that can be
192  *                 disabled
193  *
194  * This function writes buttons that can be disabled to @buf. If
195  * @only_disabled is true, then @buf contains only those buttons
196  * that are currently disabled. Returns 0 on success or negative
197  * errno on failure.
198  */
199 static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata,
200 					  char *buf, unsigned int type,
201 					  bool only_disabled)
202 {
203 	int n_events = get_n_events_by_type(type);
204 	unsigned long *bits;
205 	ssize_t ret;
206 	int i;
207 
208 	bits = bitmap_zalloc(n_events, GFP_KERNEL);
209 	if (!bits)
210 		return -ENOMEM;
211 
212 	for (i = 0; i < ddata->pdata->nbuttons; i++) {
213 		struct gpio_button_data *bdata = &ddata->data[i];
214 
215 		if (bdata->button->type != type)
216 			continue;
217 
218 		if (only_disabled && !bdata->disabled)
219 			continue;
220 
221 		__set_bit(*bdata->code, bits);
222 	}
223 
224 	ret = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", n_events, bits);
225 	buf[ret++] = '\n';
226 	buf[ret] = '\0';
227 
228 	bitmap_free(bits);
229 
230 	return ret;
231 }
232 
233 /**
234  * gpio_keys_attr_store_helper() - enable/disable buttons based on given bitmap
235  * @ddata: pointer to drvdata
236  * @buf: buffer from userspace that contains stringified bitmap
237  * @type: button type (%EV_KEY, %EV_SW)
238  *
239  * This function parses stringified bitmap from @buf and disables/enables
240  * GPIO buttons accordingly. Returns 0 on success and negative error
241  * on failure.
242  */
243 static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata,
244 					   const char *buf, unsigned int type)
245 {
246 	int n_events = get_n_events_by_type(type);
247 	const unsigned long *bitmap = get_bm_events_by_type(ddata->input, type);
248 	ssize_t error;
249 	int i;
250 
251 	unsigned long *bits __free(bitmap) = bitmap_alloc(n_events, GFP_KERNEL);
252 	if (!bits)
253 		return -ENOMEM;
254 
255 	error = bitmap_parselist(buf, bits, n_events);
256 	if (error)
257 		return error;
258 
259 	/* First validate */
260 	if (!bitmap_subset(bits, bitmap, n_events))
261 		return -EINVAL;
262 
263 	for (i = 0; i < ddata->pdata->nbuttons; i++) {
264 		struct gpio_button_data *bdata = &ddata->data[i];
265 
266 		if (bdata->button->type != type)
267 			continue;
268 
269 		if (test_bit(*bdata->code, bits) &&
270 		    !bdata->button->can_disable) {
271 			return -EINVAL;
272 		}
273 	}
274 
275 	guard(mutex)(&ddata->disable_lock);
276 
277 	for (i = 0; i < ddata->pdata->nbuttons; i++) {
278 		struct gpio_button_data *bdata = &ddata->data[i];
279 
280 		if (bdata->button->type != type)
281 			continue;
282 
283 		if (test_bit(*bdata->code, bits))
284 			gpio_keys_disable_button(bdata);
285 		else
286 			gpio_keys_enable_button(bdata);
287 	}
288 
289 	return 0;
290 }
291 
292 #define ATTR_SHOW_FN(name, type, only_disabled)				\
293 static ssize_t gpio_keys_show_##name(struct device *dev,		\
294 				     struct device_attribute *attr,	\
295 				     char *buf)				\
296 {									\
297 	struct platform_device *pdev = to_platform_device(dev);		\
298 	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\
299 									\
300 	return gpio_keys_attr_show_helper(ddata, buf,			\
301 					  type, only_disabled);		\
302 }
303 
304 ATTR_SHOW_FN(keys, EV_KEY, false);
305 ATTR_SHOW_FN(switches, EV_SW, false);
306 ATTR_SHOW_FN(disabled_keys, EV_KEY, true);
307 ATTR_SHOW_FN(disabled_switches, EV_SW, true);
308 
309 /*
310  * ATTRIBUTES:
311  *
312  * /sys/devices/platform/gpio-keys/keys [ro]
313  * /sys/devices/platform/gpio-keys/switches [ro]
314  */
315 static DEVICE_ATTR(keys, S_IRUGO, gpio_keys_show_keys, NULL);
316 static DEVICE_ATTR(switches, S_IRUGO, gpio_keys_show_switches, NULL);
317 
318 #define ATTR_STORE_FN(name, type)					\
319 static ssize_t gpio_keys_store_##name(struct device *dev,		\
320 				      struct device_attribute *attr,	\
321 				      const char *buf,			\
322 				      size_t count)			\
323 {									\
324 	struct platform_device *pdev = to_platform_device(dev);		\
325 	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\
326 	ssize_t error;							\
327 									\
328 	error = gpio_keys_attr_store_helper(ddata, buf, type);		\
329 	if (error)							\
330 		return error;						\
331 									\
332 	return count;							\
333 }
334 
335 ATTR_STORE_FN(disabled_keys, EV_KEY);
336 ATTR_STORE_FN(disabled_switches, EV_SW);
337 
338 /*
339  * ATTRIBUTES:
340  *
341  * /sys/devices/platform/gpio-keys/disabled_keys [rw]
342  * /sys/devices/platform/gpio-keys/disables_switches [rw]
343  */
344 static DEVICE_ATTR(disabled_keys, S_IWUSR | S_IRUGO,
345 		   gpio_keys_show_disabled_keys,
346 		   gpio_keys_store_disabled_keys);
347 static DEVICE_ATTR(disabled_switches, S_IWUSR | S_IRUGO,
348 		   gpio_keys_show_disabled_switches,
349 		   gpio_keys_store_disabled_switches);
350 
351 static struct attribute *gpio_keys_attrs[] = {
352 	&dev_attr_keys.attr,
353 	&dev_attr_switches.attr,
354 	&dev_attr_disabled_keys.attr,
355 	&dev_attr_disabled_switches.attr,
356 	NULL,
357 };
358 ATTRIBUTE_GROUPS(gpio_keys);
359 
360 static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
361 {
362 	const struct gpio_keys_button *button = bdata->button;
363 	struct input_dev *input = bdata->input;
364 	unsigned int type = button->type ?: EV_KEY;
365 	int state;
366 
367 	state = bdata->debounce_use_hrtimer ?
368 			gpiod_get_value(bdata->gpiod) :
369 			gpiod_get_value_cansleep(bdata->gpiod);
370 	if (state < 0) {
371 		dev_err(input->dev.parent,
372 			"failed to get gpio state: %d\n", state);
373 		return;
374 	}
375 
376 	if (type == EV_ABS) {
377 		if (state)
378 			input_event(input, type, button->code, button->value);
379 	} else {
380 		input_event(input, type, *bdata->code, state);
381 	}
382 }
383 
384 static void gpio_keys_debounce_event(struct gpio_button_data *bdata)
385 {
386 	gpio_keys_gpio_report_event(bdata);
387 	input_sync(bdata->input);
388 
389 	if (bdata->button->wakeup)
390 		pm_relax(bdata->input->dev.parent);
391 }
392 
393 static void gpio_keys_gpio_work_func(struct work_struct *work)
394 {
395 	struct gpio_button_data *bdata =
396 		container_of(work, struct gpio_button_data, work.work);
397 
398 	gpio_keys_debounce_event(bdata);
399 }
400 
401 static enum hrtimer_restart gpio_keys_debounce_timer(struct hrtimer *t)
402 {
403 	struct gpio_button_data *bdata =
404 		container_of(t, struct gpio_button_data, debounce_timer);
405 
406 	gpio_keys_debounce_event(bdata);
407 
408 	return HRTIMER_NORESTART;
409 }
410 
411 static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
412 {
413 	struct gpio_button_data *bdata = dev_id;
414 
415 	BUG_ON(irq != bdata->irq);
416 
417 	if (bdata->button->wakeup) {
418 		const struct gpio_keys_button *button = bdata->button;
419 
420 		pm_stay_awake(bdata->input->dev.parent);
421 		if (bdata->suspended  &&
422 		    (button->type == 0 || button->type == EV_KEY)) {
423 			/*
424 			 * Simulate wakeup key press in case the key has
425 			 * already released by the time we got interrupt
426 			 * handler to run.
427 			 */
428 			input_report_key(bdata->input, button->code, 1);
429 		}
430 	}
431 
432 	if (bdata->debounce_use_hrtimer) {
433 		hrtimer_start(&bdata->debounce_timer,
434 			      ms_to_ktime(bdata->software_debounce),
435 			      HRTIMER_MODE_REL);
436 	} else {
437 		mod_delayed_work(system_dfl_wq,
438 				 &bdata->work,
439 				 msecs_to_jiffies(bdata->software_debounce));
440 	}
441 
442 	return IRQ_HANDLED;
443 }
444 
445 static enum hrtimer_restart gpio_keys_irq_timer(struct hrtimer *t)
446 {
447 	struct gpio_button_data *bdata = container_of(t,
448 						      struct gpio_button_data,
449 						      release_timer);
450 	struct input_dev *input = bdata->input;
451 
452 	guard(spinlock_irqsave)(&bdata->lock);
453 
454 	if (bdata->key_pressed) {
455 		input_report_key(input, *bdata->code, 0);
456 		input_sync(input);
457 		bdata->key_pressed = false;
458 	}
459 
460 	return HRTIMER_NORESTART;
461 }
462 
463 static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
464 {
465 	struct gpio_button_data *bdata = dev_id;
466 	struct input_dev *input = bdata->input;
467 
468 	BUG_ON(irq != bdata->irq);
469 
470 	guard(spinlock_irqsave)(&bdata->lock);
471 
472 	if (!bdata->key_pressed) {
473 		if (bdata->button->wakeup)
474 			pm_wakeup_event(bdata->input->dev.parent, 0);
475 
476 		input_report_key(input, *bdata->code, 1);
477 		input_sync(input);
478 
479 		if (!bdata->release_delay) {
480 			input_report_key(input, *bdata->code, 0);
481 			input_sync(input);
482 			goto out;
483 		}
484 
485 		bdata->key_pressed = true;
486 	}
487 
488 	if (bdata->release_delay)
489 		hrtimer_start(&bdata->release_timer,
490 			      ms_to_ktime(bdata->release_delay),
491 			      HRTIMER_MODE_REL);
492 out:
493 	return IRQ_HANDLED;
494 }
495 
496 static int gpio_keys_setup_key(struct platform_device *pdev,
497 				struct input_dev *input,
498 				struct gpio_keys_drvdata *ddata,
499 				const struct gpio_keys_button *button,
500 				int idx,
501 				struct fwnode_handle *child)
502 {
503 	const char *desc = button->desc ? button->desc : "gpio_keys";
504 	struct device *dev = &pdev->dev;
505 	struct gpio_button_data *bdata = &ddata->data[idx];
506 	irq_handler_t isr;
507 	unsigned long irqflags;
508 	const char *wakedesc;
509 	int irq;
510 	int error;
511 
512 	bdata->input = input;
513 	bdata->button = button;
514 	spin_lock_init(&bdata->lock);
515 
516 	if (child) {
517 		bdata->gpiod = devm_fwnode_gpiod_get(dev, child,
518 						     NULL, GPIOD_IN, desc);
519 		if (IS_ERR(bdata->gpiod)) {
520 			error = PTR_ERR(bdata->gpiod);
521 			if (error != -ENOENT)
522 				return dev_err_probe(dev, error,
523 						     "failed to get gpio\n");
524 
525 			/*
526 			 * GPIO is optional, we may be dealing with
527 			 * purely interrupt-driven setup.
528 			 */
529 			bdata->gpiod = NULL;
530 		}
531 	} else if (gpio_is_valid(button->gpio)) {
532 		/*
533 		 * Legacy GPIO number, so request the GPIO here and
534 		 * convert it to descriptor.
535 		 */
536 		error = devm_gpio_request_one(dev, button->gpio, GPIOF_IN, desc);
537 		if (error < 0) {
538 			dev_err(dev, "Failed to request GPIO %d, error %d\n",
539 				button->gpio, error);
540 			return error;
541 		}
542 
543 		bdata->gpiod = gpio_to_desc(button->gpio);
544 		if (!bdata->gpiod)
545 			return -EINVAL;
546 
547 		if (button->active_low ^ gpiod_is_active_low(bdata->gpiod))
548 			gpiod_toggle_active_low(bdata->gpiod);
549 	}
550 
551 	if (bdata->gpiod) {
552 		bool active_low = gpiod_is_active_low(bdata->gpiod);
553 
554 		if (button->debounce_interval) {
555 			error = gpiod_set_debounce(bdata->gpiod,
556 					button->debounce_interval * 1000);
557 			/* use timer if gpiolib doesn't provide debounce */
558 			if (error < 0)
559 				bdata->software_debounce =
560 						button->debounce_interval;
561 
562 			/*
563 			 * If reading the GPIO won't sleep, we can use a
564 			 * hrtimer instead of a standard timer for the software
565 			 * debounce, to reduce the latency as much as possible.
566 			 */
567 			bdata->debounce_use_hrtimer =
568 					!gpiod_cansleep(bdata->gpiod);
569 		}
570 
571 		/*
572 		 * If an interrupt was specified, use it instead of the gpio
573 		 * interrupt and use the gpio for reading the state. A separate
574 		 * interrupt may be used as the main button interrupt for
575 		 * runtime PM to detect events also in deeper idle states. If a
576 		 * dedicated wakeirq is used for system suspend only, see below
577 		 * for bdata->wakeirq setup.
578 		 */
579 		if (button->irq) {
580 			bdata->irq = button->irq;
581 		} else {
582 			irq = gpiod_to_irq(bdata->gpiod);
583 			if (irq < 0) {
584 				error = irq;
585 				dev_err_probe(dev, error,
586 					      "Unable to get irq number for GPIO %d\n",
587 					      button->gpio);
588 				return error;
589 			}
590 			bdata->irq = irq;
591 		}
592 
593 		INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
594 
595 		hrtimer_setup(&bdata->debounce_timer, gpio_keys_debounce_timer,
596 			      CLOCK_REALTIME, HRTIMER_MODE_REL);
597 
598 		isr = gpio_keys_gpio_isr;
599 		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
600 
601 		switch (button->wakeup_event_action) {
602 		case EV_ACT_ASSERTED:
603 			bdata->wakeup_trigger_type = active_low ?
604 				IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING;
605 			break;
606 		case EV_ACT_DEASSERTED:
607 			bdata->wakeup_trigger_type = active_low ?
608 				IRQ_TYPE_EDGE_RISING : IRQ_TYPE_EDGE_FALLING;
609 			break;
610 		case EV_ACT_ANY:
611 		default:
612 			/*
613 			 * For other cases, we are OK letting suspend/resume
614 			 * not reconfigure the trigger type.
615 			 */
616 			break;
617 		}
618 	} else {
619 		if (button->irq) {
620 			bdata->irq = button->irq;
621 		} else {
622 			irq = platform_get_irq_optional(pdev, idx);
623 			if (irq < 0) {
624 				error = irq;
625 				return dev_err_probe(dev, error,
626 						     "Unable to determine IRQ# for button #%d",
627 						     idx);
628 			}
629 
630 			bdata->irq = irq;
631 		}
632 
633 		if (button->type && button->type != EV_KEY) {
634 			dev_err(dev, "Only EV_KEY allowed for IRQ buttons.\n");
635 			return -EINVAL;
636 		}
637 
638 		bdata->release_delay = button->debounce_interval;
639 		hrtimer_setup(&bdata->release_timer, gpio_keys_irq_timer,
640 			      CLOCK_REALTIME, HRTIMER_MODE_REL);
641 
642 		isr = gpio_keys_irq_isr;
643 		irqflags = 0;
644 
645 		/*
646 		 * For IRQ buttons, there is no interrupt for release.
647 		 * So we don't need to reconfigure the trigger type for wakeup.
648 		 */
649 	}
650 
651 	bdata->code = &ddata->keymap[idx];
652 	*bdata->code = button->code;
653 	input_set_capability(input, button->type ?: EV_KEY, *bdata->code);
654 
655 	/*
656 	 * Install custom action to cancel release timer and
657 	 * workqueue item.
658 	 */
659 	error = devm_add_action(dev, gpio_keys_quiesce_key, bdata);
660 	if (error) {
661 		dev_err(dev, "failed to register quiesce action, error: %d\n",
662 			error);
663 		return error;
664 	}
665 
666 	/*
667 	 * If platform has specified that the button can be disabled,
668 	 * we don't want it to share the interrupt line.
669 	 */
670 	if (!button->can_disable)
671 		irqflags |= IRQF_SHARED;
672 
673 	error = devm_request_any_context_irq(dev, bdata->irq, isr, irqflags,
674 					     desc, bdata);
675 	if (error < 0) {
676 		dev_err(dev, "Unable to claim irq %d; error %d\n",
677 			bdata->irq, error);
678 		return error;
679 	}
680 
681 	if (!button->wakeirq)
682 		return 0;
683 
684 	/* Use :wakeup suffix like drivers/base/power/wakeirq.c does */
685 	wakedesc = devm_kasprintf(dev, GFP_KERNEL, "%s:wakeup", desc);
686 	if (!wakedesc)
687 		return -ENOMEM;
688 
689 	bdata->wakeirq = button->wakeirq;
690 	irqflags |= IRQF_NO_SUSPEND;
691 
692 	/*
693 	 * Wakeirq shares the handler with the main interrupt, it's only
694 	 * active during system suspend. See gpio_keys_button_enable_wakeup()
695 	 * and gpio_keys_button_disable_wakeup().
696 	 */
697 	error = devm_request_any_context_irq(dev, bdata->wakeirq, isr,
698 					     irqflags, wakedesc, bdata);
699 	if (error < 0) {
700 		dev_err(dev, "Unable to claim wakeirq %d; error %d\n",
701 			bdata->irq, error);
702 		return error;
703 	}
704 
705 	/*
706 	 * Disable wakeirq until suspend. IRQF_NO_AUTOEN won't work if
707 	 * IRQF_SHARED was set based on !button->can_disable.
708 	 */
709 	disable_irq(bdata->wakeirq);
710 
711 	return 0;
712 }
713 
714 static void gpio_keys_report_state(struct gpio_keys_drvdata *ddata)
715 {
716 	struct input_dev *input = ddata->input;
717 	int i;
718 
719 	for (i = 0; i < ddata->pdata->nbuttons; i++) {
720 		struct gpio_button_data *bdata = &ddata->data[i];
721 		if (bdata->gpiod)
722 			gpio_keys_gpio_report_event(bdata);
723 	}
724 	input_sync(input);
725 }
726 
727 static int gpio_keys_open(struct input_dev *input)
728 {
729 	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
730 	const struct gpio_keys_platform_data *pdata = ddata->pdata;
731 	int error;
732 
733 	if (pdata->enable) {
734 		error = pdata->enable(input->dev.parent);
735 		if (error)
736 			return error;
737 	}
738 
739 	/* Report current state of buttons that are connected to GPIOs */
740 	gpio_keys_report_state(ddata);
741 
742 	return 0;
743 }
744 
745 static void gpio_keys_close(struct input_dev *input)
746 {
747 	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
748 	const struct gpio_keys_platform_data *pdata = ddata->pdata;
749 
750 	if (pdata->disable)
751 		pdata->disable(input->dev.parent);
752 }
753 
754 /*
755  * Handlers for alternative sources of platform_data
756  */
757 
758 /*
759  * Translate properties into platform_data
760  */
761 static struct gpio_keys_platform_data *
762 gpio_keys_get_devtree_pdata(struct device *dev)
763 {
764 	struct gpio_keys_platform_data *pdata;
765 	struct gpio_keys_button *button;
766 	int nbuttons, irq;
767 
768 	nbuttons = device_get_child_node_count(dev);
769 	if (nbuttons == 0)
770 		return ERR_PTR(-ENODEV);
771 
772 	pdata = devm_kzalloc(dev,
773 			     sizeof(*pdata) + nbuttons * sizeof(*button),
774 			     GFP_KERNEL);
775 	if (!pdata)
776 		return ERR_PTR(-ENOMEM);
777 
778 	button = (struct gpio_keys_button *)(pdata + 1);
779 
780 	pdata->buttons = button;
781 	pdata->nbuttons = nbuttons;
782 
783 	pdata->rep = device_property_read_bool(dev, "autorepeat");
784 
785 	device_property_read_string(dev, "label", &pdata->name);
786 
787 	device_for_each_child_node_scoped(dev, child) {
788 		if (is_of_node(child)) {
789 			irq = of_irq_get_byname(to_of_node(child), "irq");
790 			if (irq > 0)
791 				button->irq = irq;
792 
793 			irq = of_irq_get_byname(to_of_node(child), "wakeup");
794 			if (irq > 0)
795 				button->wakeirq = irq;
796 
797 			if (!button->irq && !button->wakeirq)
798 				button->irq =
799 					irq_of_parse_and_map(to_of_node(child), 0);
800 		}
801 
802 		if (fwnode_property_read_u32(child, "linux,code",
803 					     &button->code)) {
804 			dev_err(dev, "Button without keycode\n");
805 			return ERR_PTR(-EINVAL);
806 		}
807 
808 		fwnode_property_read_string(child, "label", &button->desc);
809 
810 		if (fwnode_property_read_u32(child, "linux,input-type",
811 					     &button->type))
812 			button->type = EV_KEY;
813 
814 		fwnode_property_read_u32(child, "linux,input-value",
815 					 (u32 *)&button->value);
816 
817 		button->wakeup =
818 			fwnode_property_read_bool(child, "wakeup-source") ||
819 			/* legacy name */
820 			fwnode_property_read_bool(child, "gpio-key,wakeup");
821 
822 		fwnode_property_read_u32(child, "wakeup-event-action",
823 					 &button->wakeup_event_action);
824 
825 		button->can_disable =
826 			fwnode_property_read_bool(child, "linux,can-disable");
827 
828 		if (fwnode_property_read_u32(child, "debounce-interval",
829 					 &button->debounce_interval))
830 			button->debounce_interval = 5;
831 
832 		button++;
833 	}
834 
835 	return pdata;
836 }
837 
838 static const struct of_device_id gpio_keys_of_match[] = {
839 	{ .compatible = "gpio-keys", },
840 	{ },
841 };
842 MODULE_DEVICE_TABLE(of, gpio_keys_of_match);
843 
844 static int gpio_keys_probe(struct platform_device *pdev)
845 {
846 	struct device *dev = &pdev->dev;
847 	const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev);
848 	struct fwnode_handle *child = NULL;
849 	struct gpio_keys_drvdata *ddata;
850 	struct input_dev *input;
851 	int i, error;
852 	int wakeup = 0;
853 
854 	if (!pdata) {
855 		pdata = gpio_keys_get_devtree_pdata(dev);
856 		if (IS_ERR(pdata))
857 			return PTR_ERR(pdata);
858 	}
859 
860 	ddata = devm_kzalloc(dev, struct_size(ddata, data, pdata->nbuttons),
861 			     GFP_KERNEL);
862 	if (!ddata) {
863 		dev_err(dev, "failed to allocate state\n");
864 		return -ENOMEM;
865 	}
866 
867 	ddata->keymap = devm_kcalloc(dev,
868 				     pdata->nbuttons, sizeof(ddata->keymap[0]),
869 				     GFP_KERNEL);
870 	if (!ddata->keymap)
871 		return -ENOMEM;
872 
873 	input = devm_input_allocate_device(dev);
874 	if (!input) {
875 		dev_err(dev, "failed to allocate input device\n");
876 		return -ENOMEM;
877 	}
878 
879 	ddata->pdata = pdata;
880 	ddata->input = input;
881 	mutex_init(&ddata->disable_lock);
882 
883 	platform_set_drvdata(pdev, ddata);
884 	input_set_drvdata(input, ddata);
885 
886 	input->name = pdata->name ? : pdev->name;
887 	input->phys = "gpio-keys/input0";
888 	input->dev.parent = dev;
889 	input->open = gpio_keys_open;
890 	input->close = gpio_keys_close;
891 
892 	input->id.bustype = BUS_HOST;
893 	input->id.vendor = 0x0001;
894 	input->id.product = 0x0001;
895 	input->id.version = 0x0100;
896 
897 	input->keycode = ddata->keymap;
898 	input->keycodesize = sizeof(ddata->keymap[0]);
899 	input->keycodemax = pdata->nbuttons;
900 
901 	/* Enable auto repeat feature of Linux input subsystem */
902 	if (pdata->rep)
903 		__set_bit(EV_REP, input->evbit);
904 
905 	for (i = 0; i < pdata->nbuttons; i++) {
906 		const struct gpio_keys_button *button = &pdata->buttons[i];
907 
908 		if (!dev_get_platdata(dev)) {
909 			child = device_get_next_child_node(dev, child);
910 			if (!child) {
911 				dev_err(dev,
912 					"missing child device node for entry %d\n",
913 					i);
914 				return -EINVAL;
915 			}
916 		}
917 
918 		error = gpio_keys_setup_key(pdev, input, ddata,
919 					    button, i, child);
920 		if (error) {
921 			fwnode_handle_put(child);
922 			return error;
923 		}
924 
925 		if (button->wakeup)
926 			wakeup = 1;
927 	}
928 
929 	fwnode_handle_put(child);
930 
931 	error = input_register_device(input);
932 	if (error) {
933 		dev_err(dev, "Unable to register input device, error: %d\n",
934 			error);
935 		return error;
936 	}
937 
938 	device_init_wakeup(dev, wakeup);
939 
940 	return 0;
941 }
942 
943 static int __maybe_unused
944 gpio_keys_button_enable_wakeup(struct gpio_button_data *bdata)
945 {
946 	int error;
947 
948 	error = enable_irq_wake(bdata->irq);
949 	if (error) {
950 		dev_err(bdata->input->dev.parent,
951 			"failed to configure IRQ %d as wakeup source: %d\n",
952 			bdata->irq, error);
953 		return error;
954 	}
955 
956 	if (bdata->wakeup_trigger_type) {
957 		error = irq_set_irq_type(bdata->irq,
958 					 bdata->wakeup_trigger_type);
959 		if (error) {
960 			dev_err(bdata->input->dev.parent,
961 				"failed to set wakeup trigger %08x for IRQ %d: %d\n",
962 				bdata->wakeup_trigger_type, bdata->irq, error);
963 			disable_irq_wake(bdata->irq);
964 			return error;
965 		}
966 	}
967 
968 	if (bdata->wakeirq) {
969 		enable_irq(bdata->wakeirq);
970 		disable_irq(bdata->irq);
971 	}
972 
973 	return 0;
974 }
975 
976 static void __maybe_unused
977 gpio_keys_button_disable_wakeup(struct gpio_button_data *bdata)
978 {
979 	int error;
980 
981 	if (bdata->wakeirq) {
982 		enable_irq(bdata->irq);
983 		disable_irq(bdata->wakeirq);
984 	}
985 
986 	/*
987 	 * The trigger type is always both edges for gpio-based keys and we do
988 	 * not support changing wakeup trigger for interrupt-based keys.
989 	 */
990 	if (bdata->wakeup_trigger_type) {
991 		error = irq_set_irq_type(bdata->irq, IRQ_TYPE_EDGE_BOTH);
992 		if (error)
993 			dev_warn(bdata->input->dev.parent,
994 				 "failed to restore interrupt trigger for IRQ %d: %d\n",
995 				 bdata->irq, error);
996 	}
997 
998 	error = disable_irq_wake(bdata->irq);
999 	if (error)
1000 		dev_warn(bdata->input->dev.parent,
1001 			 "failed to disable IRQ %d as wake source: %d\n",
1002 			 bdata->irq, error);
1003 }
1004 
1005 static int __maybe_unused
1006 gpio_keys_enable_wakeup(struct gpio_keys_drvdata *ddata)
1007 {
1008 	struct gpio_button_data *bdata;
1009 	int error;
1010 	int i;
1011 
1012 	for (i = 0; i < ddata->pdata->nbuttons; i++) {
1013 		bdata = &ddata->data[i];
1014 		if (bdata->button->wakeup) {
1015 			error = gpio_keys_button_enable_wakeup(bdata);
1016 			if (error)
1017 				goto err_out;
1018 		}
1019 		bdata->suspended = true;
1020 	}
1021 
1022 	return 0;
1023 
1024 err_out:
1025 	while (i--) {
1026 		bdata = &ddata->data[i];
1027 		if (bdata->button->wakeup)
1028 			gpio_keys_button_disable_wakeup(bdata);
1029 		bdata->suspended = false;
1030 	}
1031 
1032 	return error;
1033 }
1034 
1035 static void __maybe_unused
1036 gpio_keys_disable_wakeup(struct gpio_keys_drvdata *ddata)
1037 {
1038 	struct gpio_button_data *bdata;
1039 	int i;
1040 
1041 	for (i = 0; i < ddata->pdata->nbuttons; i++) {
1042 		bdata = &ddata->data[i];
1043 		bdata->suspended = false;
1044 		if (irqd_is_wakeup_set(irq_get_irq_data(bdata->irq)))
1045 			gpio_keys_button_disable_wakeup(bdata);
1046 	}
1047 }
1048 
1049 static int gpio_keys_suspend(struct device *dev)
1050 {
1051 	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
1052 	struct input_dev *input = ddata->input;
1053 	int error;
1054 
1055 	if (device_may_wakeup(dev)) {
1056 		error = gpio_keys_enable_wakeup(ddata);
1057 		if (error)
1058 			return error;
1059 	} else {
1060 		guard(mutex)(&input->mutex);
1061 
1062 		if (input_device_enabled(input))
1063 			gpio_keys_close(input);
1064 	}
1065 
1066 	return 0;
1067 }
1068 
1069 static int gpio_keys_resume(struct device *dev)
1070 {
1071 	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
1072 	struct input_dev *input = ddata->input;
1073 	int error;
1074 
1075 	if (device_may_wakeup(dev)) {
1076 		gpio_keys_disable_wakeup(ddata);
1077 	} else {
1078 		guard(mutex)(&input->mutex);
1079 
1080 		if (input_device_enabled(input)) {
1081 			error = gpio_keys_open(input);
1082 			if (error)
1083 				return error;
1084 		}
1085 	}
1086 
1087 	gpio_keys_report_state(ddata);
1088 	return 0;
1089 }
1090 
1091 static DEFINE_SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume);
1092 
1093 static void gpio_keys_shutdown(struct platform_device *pdev)
1094 {
1095 	int ret;
1096 
1097 	ret = gpio_keys_suspend(&pdev->dev);
1098 	if (ret)
1099 		dev_err(&pdev->dev, "failed to shutdown\n");
1100 }
1101 
1102 static struct platform_driver gpio_keys_device_driver = {
1103 	.probe		= gpio_keys_probe,
1104 	.shutdown	= gpio_keys_shutdown,
1105 	.driver		= {
1106 		.name	= "gpio-keys",
1107 		.pm	= pm_sleep_ptr(&gpio_keys_pm_ops),
1108 		.of_match_table = gpio_keys_of_match,
1109 		.dev_groups	= gpio_keys_groups,
1110 	}
1111 };
1112 
1113 static int __init gpio_keys_init(void)
1114 {
1115 	return platform_driver_register(&gpio_keys_device_driver);
1116 }
1117 
1118 static void __exit gpio_keys_exit(void)
1119 {
1120 	platform_driver_unregister(&gpio_keys_device_driver);
1121 }
1122 
1123 late_initcall(gpio_keys_init);
1124 module_exit(gpio_keys_exit);
1125 
1126 MODULE_LICENSE("GPL");
1127 MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>");
1128 MODULE_DESCRIPTION("Keyboard driver for GPIOs");
1129 MODULE_ALIAS("platform:gpio-keys");
1130