1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * AT and PS/2 keyboard driver 4 * 5 * Copyright (c) 1999-2002 Vojtech Pavlik 6 */ 7 8 9 /* 10 * This driver can handle standard AT keyboards and PS/2 keyboards in 11 * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb 12 * input-only controllers and AT keyboards connected over a one way RS232 13 * converter. 14 */ 15 16 #include <linux/delay.h> 17 #include <linux/module.h> 18 #include <linux/slab.h> 19 #include <linux/interrupt.h> 20 #include <linux/init.h> 21 #include <linux/input.h> 22 #include <linux/input/vivaldi-fmap.h> 23 #include <linux/serio.h> 24 #include <linux/workqueue.h> 25 #include <linux/libps2.h> 26 #include <linux/mutex.h> 27 #include <linux/dmi.h> 28 #include <linux/property.h> 29 30 #define DRIVER_DESC "AT and PS/2 keyboard driver" 31 32 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>"); 33 MODULE_DESCRIPTION(DRIVER_DESC); 34 MODULE_LICENSE("GPL"); 35 36 static int atkbd_set = 2; 37 module_param_named(set, atkbd_set, int, 0); 38 MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)"); 39 40 #if defined(__i386__) || defined(__x86_64__) || defined(__hppa__) 41 static bool atkbd_reset; 42 #else 43 static bool atkbd_reset = true; 44 #endif 45 module_param_named(reset, atkbd_reset, bool, 0); 46 MODULE_PARM_DESC(reset, "Reset keyboard during initialization"); 47 48 static bool atkbd_softrepeat; 49 module_param_named(softrepeat, atkbd_softrepeat, bool, 0); 50 MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat"); 51 52 static bool atkbd_softraw = true; 53 module_param_named(softraw, atkbd_softraw, bool, 0); 54 MODULE_PARM_DESC(softraw, "Use software generated rawmode"); 55 56 static bool atkbd_scroll; 57 module_param_named(scroll, atkbd_scroll, bool, 0); 58 MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards"); 59 60 static bool atkbd_extra; 61 module_param_named(extra, atkbd_extra, bool, 0); 62 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); 63 64 static bool atkbd_terminal; 65 module_param_named(terminal, atkbd_terminal, bool, 0); 66 MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2"); 67 68 #define SCANCODE(keymap) ((keymap >> 16) & 0xFFFF) 69 #define KEYCODE(keymap) (keymap & 0xFFFF) 70 71 /* 72 * Scancode to keycode tables. These are just the default setting, and 73 * are loadable via a userland utility. 74 */ 75 76 #define ATKBD_KEYMAP_SIZE 512 77 78 static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = { 79 80 #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES 81 82 /* XXX: need a more general approach */ 83 84 #include "hpps2atkbd.h" /* include the keyboard scancodes */ 85 86 #else 87 0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41,117, 88 0, 56, 42, 93, 29, 16, 2, 0, 0, 0, 44, 31, 30, 17, 3, 0, 89 0, 46, 45, 32, 18, 5, 4, 95, 0, 57, 47, 33, 20, 19, 6,183, 90 0, 49, 48, 35, 34, 21, 7,184, 0, 0, 50, 36, 22, 8, 9,185, 91 0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0, 92 0, 89, 40, 0, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 85, 93 0, 86, 91, 90, 92, 0, 14, 94, 0, 79,124, 75, 71,121, 0, 0, 94 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99, 95 96 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 97 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, 98 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, 99 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, 100 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, 101 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, 102 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, 103 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0, 104 105 0, 0, 0, 65, 99, 106 #endif 107 }; 108 109 static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = { 110 111 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60, 112 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62, 113 134, 46, 45, 32, 18, 5, 4, 63,135, 57, 47, 33, 20, 19, 6, 64, 114 136, 49, 48, 35, 34, 21, 7, 65,137,100, 50, 36, 22, 8, 9, 66, 115 125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68, 116 113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70, 117 108,105,119,103,111,107, 14,110, 0, 79,106, 75, 71,109,102,104, 118 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183, 119 120 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0, 121 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168, 122 148,149,147,140 123 }; 124 125 static const unsigned short atkbd_unxlate_table[128] = { 126 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13, 127 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27, 128 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42, 129 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3, 130 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105, 131 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63, 132 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111, 133 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110 134 }; 135 136 #define ATKBD_CMD_SETLEDS 0x10ed 137 #define ATKBD_CMD_GSCANSET 0x11f0 138 #define ATKBD_CMD_SSCANSET 0x10f0 139 #define ATKBD_CMD_GETID 0x02f2 140 #define ATKBD_CMD_SETREP 0x10f3 141 #define ATKBD_CMD_ENABLE 0x00f4 142 #define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ 143 #define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ 144 #define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */ 145 #define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */ 146 #define ATKBD_CMD_RESET_BAT 0x02ff 147 #define ATKBD_CMD_RESEND 0x00fe 148 #define ATKBD_CMD_EX_ENABLE 0x10ea 149 #define ATKBD_CMD_EX_SETLEDS 0x20eb 150 #define ATKBD_CMD_OK_GETID 0x02e8 151 152 #define ATKBD_RET_ACK 0xfa 153 #define ATKBD_RET_NAK 0xfe 154 #define ATKBD_RET_BAT 0xaa 155 #define ATKBD_RET_EMUL0 0xe0 156 #define ATKBD_RET_EMUL1 0xe1 157 #define ATKBD_RET_RELEASE 0xf0 158 #define ATKBD_RET_HANJA 0xf1 159 #define ATKBD_RET_HANGEUL 0xf2 160 #define ATKBD_RET_ERR 0xff 161 162 #define ATKBD_KEY_UNKNOWN 0 163 #define ATKBD_KEY_NULL 255 164 165 #define ATKBD_SCR_1 0xfffe 166 #define ATKBD_SCR_2 0xfffd 167 #define ATKBD_SCR_4 0xfffc 168 #define ATKBD_SCR_8 0xfffb 169 #define ATKBD_SCR_CLICK 0xfffa 170 #define ATKBD_SCR_LEFT 0xfff9 171 #define ATKBD_SCR_RIGHT 0xfff8 172 173 #define ATKBD_SPECIAL ATKBD_SCR_RIGHT 174 175 #define ATKBD_LED_EVENT_BIT 0 176 #define ATKBD_REP_EVENT_BIT 1 177 178 #define ATKBD_XL_ERR 0x01 179 #define ATKBD_XL_BAT 0x02 180 #define ATKBD_XL_ACK 0x04 181 #define ATKBD_XL_NAK 0x08 182 #define ATKBD_XL_HANGEUL 0x10 183 #define ATKBD_XL_HANJA 0x20 184 185 static const struct { 186 unsigned short keycode; 187 unsigned char set2; 188 } atkbd_scroll_keys[] = { 189 { ATKBD_SCR_1, 0xc5 }, 190 { ATKBD_SCR_2, 0x9d }, 191 { ATKBD_SCR_4, 0xa4 }, 192 { ATKBD_SCR_8, 0x9b }, 193 { ATKBD_SCR_CLICK, 0xe0 }, 194 { ATKBD_SCR_LEFT, 0xcb }, 195 { ATKBD_SCR_RIGHT, 0xd2 }, 196 }; 197 198 /* 199 * The atkbd control structure 200 */ 201 202 struct atkbd { 203 204 struct ps2dev ps2dev; 205 struct input_dev *dev; 206 207 /* Written only during init */ 208 char name[64]; 209 char phys[32]; 210 211 unsigned short id; 212 unsigned short keycode[ATKBD_KEYMAP_SIZE]; 213 DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE); 214 unsigned char set; 215 bool translated; 216 bool extra; 217 bool write; 218 bool softrepeat; 219 bool softraw; 220 bool scroll; 221 bool enabled; 222 223 /* Accessed only from interrupt */ 224 unsigned char emul; 225 bool resend; 226 bool release; 227 unsigned long xl_bit; 228 unsigned int last; 229 unsigned long time; 230 unsigned long err_count; 231 232 struct delayed_work event_work; 233 unsigned long event_jiffies; 234 unsigned long event_mask; 235 236 /* Serializes reconnect(), attr->set() and event work */ 237 struct mutex mutex; 238 239 struct vivaldi_data vdata; 240 }; 241 242 /* 243 * System-specific keymap fixup routine 244 */ 245 static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); 246 static void *atkbd_platform_fixup_data; 247 static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); 248 249 /* 250 * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding 251 * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed. 252 */ 253 static bool atkbd_skip_deactivate; 254 255 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, 256 ssize_t (*handler)(struct atkbd *, char *)); 257 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, 258 ssize_t (*handler)(struct atkbd *, const char *, size_t)); 259 #define ATKBD_DEFINE_ATTR(_name) \ 260 static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ 261 static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t); \ 262 static ssize_t atkbd_do_show_##_name(struct device *d, \ 263 struct device_attribute *attr, char *b) \ 264 { \ 265 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ 266 } \ 267 static ssize_t atkbd_do_set_##_name(struct device *d, \ 268 struct device_attribute *attr, const char *b, size_t s) \ 269 { \ 270 return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \ 271 } \ 272 static struct device_attribute atkbd_attr_##_name = \ 273 __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name); 274 275 ATKBD_DEFINE_ATTR(extra); 276 ATKBD_DEFINE_ATTR(force_release); 277 ATKBD_DEFINE_ATTR(scroll); 278 ATKBD_DEFINE_ATTR(set); 279 ATKBD_DEFINE_ATTR(softrepeat); 280 ATKBD_DEFINE_ATTR(softraw); 281 282 #define ATKBD_DEFINE_RO_ATTR(_name) \ 283 static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ 284 static ssize_t atkbd_do_show_##_name(struct device *d, \ 285 struct device_attribute *attr, char *b) \ 286 { \ 287 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ 288 } \ 289 static struct device_attribute atkbd_attr_##_name = \ 290 __ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL); 291 292 ATKBD_DEFINE_RO_ATTR(err_count); 293 ATKBD_DEFINE_RO_ATTR(function_row_physmap); 294 295 static struct attribute *atkbd_attributes[] = { 296 &atkbd_attr_extra.attr, 297 &atkbd_attr_force_release.attr, 298 &atkbd_attr_scroll.attr, 299 &atkbd_attr_set.attr, 300 &atkbd_attr_softrepeat.attr, 301 &atkbd_attr_softraw.attr, 302 &atkbd_attr_err_count.attr, 303 &atkbd_attr_function_row_physmap.attr, 304 NULL 305 }; 306 307 static ssize_t atkbd_show_function_row_physmap(struct atkbd *atkbd, char *buf) 308 { 309 return vivaldi_function_row_physmap_show(&atkbd->vdata, buf); 310 } 311 312 static struct atkbd *atkbd_from_serio(struct serio *serio) 313 { 314 struct ps2dev *ps2dev = serio_get_drvdata(serio); 315 316 return container_of(ps2dev, struct atkbd, ps2dev); 317 } 318 319 static umode_t atkbd_attr_is_visible(struct kobject *kobj, 320 struct attribute *attr, int i) 321 { 322 struct device *dev = kobj_to_dev(kobj); 323 struct serio *serio = to_serio_port(dev); 324 struct atkbd *atkbd = atkbd_from_serio(serio); 325 326 if (attr == &atkbd_attr_function_row_physmap.attr && 327 !atkbd->vdata.num_function_row_keys) 328 return 0; 329 330 return attr->mode; 331 } 332 333 static const struct attribute_group atkbd_attribute_group = { 334 .attrs = atkbd_attributes, 335 .is_visible = atkbd_attr_is_visible, 336 }; 337 338 __ATTRIBUTE_GROUPS(atkbd_attribute); 339 340 static const unsigned int xl_table[] = { 341 ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK, 342 ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL, 343 }; 344 345 /* 346 * Checks if we should mangle the scancode to extract 'release' bit 347 * in translated mode. 348 */ 349 static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code) 350 { 351 int i; 352 353 if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1) 354 return false; 355 356 for (i = 0; i < ARRAY_SIZE(xl_table); i++) 357 if (code == xl_table[i]) 358 return test_bit(i, &xl_bit); 359 360 return true; 361 } 362 363 /* 364 * Calculates new value of xl_bit so the driver can distinguish 365 * between make/break pair of scancodes for select keys and PS/2 366 * protocol responses. 367 */ 368 static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code) 369 { 370 int i; 371 372 for (i = 0; i < ARRAY_SIZE(xl_table); i++) { 373 if (!((code ^ xl_table[i]) & 0x7f)) { 374 if (code & 0x80) 375 __clear_bit(i, &atkbd->xl_bit); 376 else 377 __set_bit(i, &atkbd->xl_bit); 378 break; 379 } 380 } 381 } 382 383 /* 384 * Encode the scancode, 0xe0 prefix, and high bit into a single integer, 385 * keeping kernel 2.4 compatibility for set 2 386 */ 387 static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code) 388 { 389 if (atkbd->set == 3) { 390 if (atkbd->emul == 1) 391 code |= 0x100; 392 } else { 393 code = (code & 0x7f) | ((code & 0x80) << 1); 394 if (atkbd->emul == 1) 395 code |= 0x80; 396 } 397 398 return code; 399 } 400 401 /* 402 * Tries to handle frame or parity error by requesting the keyboard controller 403 * to resend the last byte. This historically not done on x86 as controllers 404 * there typically do not implement this command. 405 */ 406 static bool __maybe_unused atkbd_handle_frame_error(struct ps2dev *ps2dev, 407 u8 data, unsigned int flags) 408 { 409 struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev); 410 struct serio *serio = ps2dev->serio; 411 412 if ((flags & (SERIO_FRAME | SERIO_PARITY)) && 413 (~flags & SERIO_TIMEOUT) && 414 !atkbd->resend && atkbd->write) { 415 dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags); 416 serio_write(serio, ATKBD_CMD_RESEND); 417 atkbd->resend = true; 418 return true; 419 } 420 421 if (!flags && data == ATKBD_RET_ACK) 422 atkbd->resend = false; 423 424 return false; 425 } 426 427 static enum ps2_disposition atkbd_pre_receive_byte(struct ps2dev *ps2dev, 428 u8 data, unsigned int flags) 429 { 430 struct serio *serio = ps2dev->serio; 431 432 dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags); 433 434 #if !defined(__i386__) && !defined (__x86_64__) 435 if (atkbd_handle_frame_error(ps2dev, data, flags)) 436 return PS2_IGNORE; 437 #endif 438 439 return PS2_PROCESS; 440 } 441 442 static void atkbd_receive_byte(struct ps2dev *ps2dev, u8 data) 443 { 444 struct serio *serio = ps2dev->serio; 445 struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev); 446 struct input_dev *dev = atkbd->dev; 447 unsigned int code = data; 448 int scroll = 0, hscroll = 0, click = -1; 449 int value; 450 unsigned short keycode; 451 452 pm_wakeup_event(&serio->dev, 0); 453 454 if (!atkbd->enabled) 455 return; 456 457 input_event(dev, EV_MSC, MSC_RAW, code); 458 459 if (atkbd_platform_scancode_fixup) 460 code = atkbd_platform_scancode_fixup(atkbd, code); 461 462 if (atkbd->translated) { 463 464 if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) { 465 atkbd->release = code >> 7; 466 code &= 0x7f; 467 } 468 469 if (!atkbd->emul) 470 atkbd_calculate_xl_bit(atkbd, data); 471 } 472 473 switch (code) { 474 case ATKBD_RET_BAT: 475 atkbd->enabled = false; 476 serio_reconnect(atkbd->ps2dev.serio); 477 return; 478 case ATKBD_RET_EMUL0: 479 atkbd->emul = 1; 480 return; 481 case ATKBD_RET_EMUL1: 482 atkbd->emul = 2; 483 return; 484 case ATKBD_RET_RELEASE: 485 atkbd->release = true; 486 return; 487 case ATKBD_RET_ACK: 488 case ATKBD_RET_NAK: 489 if (printk_ratelimit()) 490 dev_warn(&serio->dev, 491 "Spurious %s on %s. " 492 "Some program might be trying to access hardware directly.\n", 493 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); 494 return; 495 case ATKBD_RET_ERR: 496 atkbd->err_count++; 497 dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n", 498 serio->phys); 499 return; 500 } 501 502 code = atkbd_compat_scancode(atkbd, code); 503 504 if (atkbd->emul && --atkbd->emul) 505 return; 506 507 keycode = atkbd->keycode[code]; 508 509 if (!(atkbd->release && test_bit(code, atkbd->force_release_mask))) 510 if (keycode != ATKBD_KEY_NULL) 511 input_event(dev, EV_MSC, MSC_SCAN, code); 512 513 switch (keycode) { 514 case ATKBD_KEY_NULL: 515 break; 516 case ATKBD_KEY_UNKNOWN: 517 dev_warn(&serio->dev, 518 "Unknown key %s (%s set %d, code %#x on %s).\n", 519 atkbd->release ? "released" : "pressed", 520 atkbd->translated ? "translated" : "raw", 521 atkbd->set, code, serio->phys); 522 dev_warn(&serio->dev, 523 "Use 'setkeycodes %s%02x <keycode>' to make it known.\n", 524 code & 0x80 ? "e0" : "", code & 0x7f); 525 input_sync(dev); 526 break; 527 case ATKBD_SCR_1: 528 scroll = 1; 529 break; 530 case ATKBD_SCR_2: 531 scroll = 2; 532 break; 533 case ATKBD_SCR_4: 534 scroll = 4; 535 break; 536 case ATKBD_SCR_8: 537 scroll = 8; 538 break; 539 case ATKBD_SCR_CLICK: 540 click = !atkbd->release; 541 break; 542 case ATKBD_SCR_LEFT: 543 hscroll = -1; 544 break; 545 case ATKBD_SCR_RIGHT: 546 hscroll = 1; 547 break; 548 default: 549 if (atkbd->release) { 550 value = 0; 551 atkbd->last = 0; 552 } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) { 553 /* Workaround Toshiba laptop multiple keypress */ 554 value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2; 555 } else { 556 value = 1; 557 atkbd->last = code; 558 atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2; 559 } 560 561 input_event(dev, EV_KEY, keycode, value); 562 input_sync(dev); 563 564 if (value && test_bit(code, atkbd->force_release_mask)) { 565 input_event(dev, EV_MSC, MSC_SCAN, code); 566 input_report_key(dev, keycode, 0); 567 input_sync(dev); 568 } 569 } 570 571 if (atkbd->scroll) { 572 if (click != -1) 573 input_report_key(dev, BTN_MIDDLE, click); 574 input_report_rel(dev, REL_WHEEL, 575 atkbd->release ? -scroll : scroll); 576 input_report_rel(dev, REL_HWHEEL, hscroll); 577 input_sync(dev); 578 } 579 580 atkbd->release = false; 581 } 582 583 static int atkbd_set_repeat_rate(struct atkbd *atkbd) 584 { 585 const short period[32] = 586 { 33, 37, 42, 46, 50, 54, 58, 63, 67, 75, 83, 92, 100, 109, 116, 125, 587 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 }; 588 const short delay[4] = 589 { 250, 500, 750, 1000 }; 590 591 struct input_dev *dev = atkbd->dev; 592 unsigned char param; 593 int i = 0, j = 0; 594 595 while (i < ARRAY_SIZE(period) - 1 && period[i] < dev->rep[REP_PERIOD]) 596 i++; 597 dev->rep[REP_PERIOD] = period[i]; 598 599 while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY]) 600 j++; 601 dev->rep[REP_DELAY] = delay[j]; 602 603 param = i | (j << 5); 604 return ps2_command(&atkbd->ps2dev, ¶m, ATKBD_CMD_SETREP); 605 } 606 607 static int atkbd_set_leds(struct atkbd *atkbd) 608 { 609 struct input_dev *dev = atkbd->dev; 610 unsigned char param[2]; 611 612 param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0) 613 | (test_bit(LED_NUML, dev->led) ? 2 : 0) 614 | (test_bit(LED_CAPSL, dev->led) ? 4 : 0); 615 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS)) 616 return -1; 617 618 if (atkbd->extra) { 619 param[0] = 0; 620 param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0) 621 | (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0) 622 | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0) 623 | (test_bit(LED_MISC, dev->led) ? 0x10 : 0) 624 | (test_bit(LED_MUTE, dev->led) ? 0x20 : 0); 625 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS)) 626 return -1; 627 } 628 629 return 0; 630 } 631 632 /* 633 * atkbd_event_work() is used to complete processing of events that 634 * can not be processed by input_event() which is often called from 635 * interrupt context. 636 */ 637 638 static void atkbd_event_work(struct work_struct *work) 639 { 640 struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work); 641 642 mutex_lock(&atkbd->mutex); 643 644 if (!atkbd->enabled) { 645 /* 646 * Serio ports are resumed asynchronously so while driver core 647 * thinks that device is already fully operational in reality 648 * it may not be ready yet. In this case we need to keep 649 * rescheduling till reconnect completes. 650 */ 651 schedule_delayed_work(&atkbd->event_work, 652 msecs_to_jiffies(100)); 653 } else { 654 if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask)) 655 atkbd_set_leds(atkbd); 656 657 if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask)) 658 atkbd_set_repeat_rate(atkbd); 659 } 660 661 mutex_unlock(&atkbd->mutex); 662 } 663 664 /* 665 * Schedule switch for execution. We need to throttle requests, 666 * otherwise keyboard may become unresponsive. 667 */ 668 static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit) 669 { 670 unsigned long delay = msecs_to_jiffies(50); 671 672 if (time_after(jiffies, atkbd->event_jiffies + delay)) 673 delay = 0; 674 675 atkbd->event_jiffies = jiffies; 676 set_bit(event_bit, &atkbd->event_mask); 677 mb(); 678 schedule_delayed_work(&atkbd->event_work, delay); 679 } 680 681 /* 682 * Event callback from the input module. Events that change the state of 683 * the hardware are processed here. If action can not be performed in 684 * interrupt context it is offloaded to atkbd_event_work. 685 */ 686 687 static int atkbd_event(struct input_dev *dev, 688 unsigned int type, unsigned int code, int value) 689 { 690 struct atkbd *atkbd = input_get_drvdata(dev); 691 692 if (!atkbd->write) 693 return -1; 694 695 switch (type) { 696 697 case EV_LED: 698 atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT); 699 return 0; 700 701 case EV_REP: 702 if (!atkbd->softrepeat) 703 atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT); 704 return 0; 705 706 default: 707 return -1; 708 } 709 } 710 711 /* 712 * atkbd_enable() signals that interrupt handler is allowed to 713 * generate input events. 714 */ 715 716 static inline void atkbd_enable(struct atkbd *atkbd) 717 { 718 serio_pause_rx(atkbd->ps2dev.serio); 719 atkbd->enabled = true; 720 serio_continue_rx(atkbd->ps2dev.serio); 721 } 722 723 /* 724 * atkbd_disable() tells input handler that all incoming data except 725 * for ACKs and command response should be dropped. 726 */ 727 728 static inline void atkbd_disable(struct atkbd *atkbd) 729 { 730 serio_pause_rx(atkbd->ps2dev.serio); 731 atkbd->enabled = false; 732 serio_continue_rx(atkbd->ps2dev.serio); 733 } 734 735 static int atkbd_activate(struct atkbd *atkbd) 736 { 737 struct ps2dev *ps2dev = &atkbd->ps2dev; 738 739 /* 740 * Enable the keyboard to receive keystrokes. 741 */ 742 743 if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) { 744 dev_err(&ps2dev->serio->dev, 745 "Failed to enable keyboard on %s\n", 746 ps2dev->serio->phys); 747 return -1; 748 } 749 750 return 0; 751 } 752 753 /* 754 * atkbd_deactivate() resets and disables the keyboard from sending 755 * keystrokes. 756 */ 757 758 static void atkbd_deactivate(struct atkbd *atkbd) 759 { 760 struct ps2dev *ps2dev = &atkbd->ps2dev; 761 762 if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS)) 763 dev_err(&ps2dev->serio->dev, 764 "Failed to deactivate keyboard on %s\n", 765 ps2dev->serio->phys); 766 } 767 768 #ifdef CONFIG_X86 769 static bool atkbd_is_portable_device(void) 770 { 771 static const char * const chassis_types[] = { 772 "8", /* Portable */ 773 "9", /* Laptop */ 774 "10", /* Notebook */ 775 "14", /* Sub-Notebook */ 776 "31", /* Convertible */ 777 "32", /* Detachable */ 778 }; 779 int i; 780 781 for (i = 0; i < ARRAY_SIZE(chassis_types); i++) 782 if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i])) 783 return true; 784 785 return false; 786 } 787 788 /* 789 * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops 790 * the controller is always in translated mode. In this mode mice/touchpads will 791 * not work. So in this case simply assume a keyboard is connected to avoid 792 * confusing some laptop keyboards. 793 * 794 * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard 795 * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id 796 * and in translated mode that is a no-op. 797 */ 798 static bool atkbd_skip_getid(struct atkbd *atkbd) 799 { 800 return atkbd->translated && atkbd_is_portable_device(); 801 } 802 #else 803 static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; } 804 #endif 805 806 /* 807 * atkbd_probe() probes for an AT keyboard on a serio port. 808 */ 809 810 static int atkbd_probe(struct atkbd *atkbd) 811 { 812 struct ps2dev *ps2dev = &atkbd->ps2dev; 813 unsigned char param[2]; 814 815 /* 816 * Some systems, where the bit-twiddling when testing the io-lines of the 817 * controller may confuse the keyboard need a full reset of the keyboard. On 818 * these systems the BIOS also usually doesn't do it for us. 819 */ 820 821 if (atkbd_reset) 822 if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT)) 823 dev_warn(&ps2dev->serio->dev, 824 "keyboard reset failed on %s\n", 825 ps2dev->serio->phys); 826 827 if (atkbd_skip_getid(atkbd)) { 828 atkbd->id = 0xab83; 829 goto deactivate_kbd; 830 } 831 832 /* 833 * Then we check the keyboard ID. We should get 0xab83 under normal conditions. 834 * Some keyboards report different values, but the first byte is always 0xab or 835 * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this 836 * should make sure we don't try to set the LEDs on it. 837 */ 838 839 param[0] = param[1] = 0xa5; /* initialize with invalid values */ 840 if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { 841 842 /* 843 * If the get ID command failed, we check if we can at least set 844 * the LEDs on the keyboard. This should work on every keyboard out there. 845 * It also turns the LEDs off, which we want anyway. 846 */ 847 param[0] = 0; 848 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) 849 return -1; 850 atkbd->id = 0xabba; 851 return 0; 852 } 853 854 if (!ps2_is_keyboard_id(param[0])) 855 return -1; 856 857 atkbd->id = (param[0] << 8) | param[1]; 858 859 if (atkbd->id == 0xaca1 && atkbd->translated) { 860 dev_err(&ps2dev->serio->dev, 861 "NCD terminal keyboards are only supported on non-translating controllers. " 862 "Use i8042.direct=1 to disable translation.\n"); 863 return -1; 864 } 865 866 deactivate_kbd: 867 /* 868 * Make sure nothing is coming from the keyboard and disturbs our 869 * internal state. 870 */ 871 if (!atkbd_skip_deactivate) 872 atkbd_deactivate(atkbd); 873 874 return 0; 875 } 876 877 /* 878 * atkbd_select_set checks if a keyboard has a working Set 3 support, and 879 * sets it into that. Unfortunately there are keyboards that can be switched 880 * to Set 3, but don't work well in that (BTC Multimedia ...) 881 */ 882 883 static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra) 884 { 885 struct ps2dev *ps2dev = &atkbd->ps2dev; 886 unsigned char param[2]; 887 888 atkbd->extra = false; 889 /* 890 * For known special keyboards we can go ahead and set the correct set. 891 * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and 892 * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards. 893 */ 894 895 if (atkbd->translated) 896 return 2; 897 898 if (atkbd->id == 0xaca1) { 899 param[0] = 3; 900 ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET); 901 return 3; 902 } 903 904 if (allow_extra) { 905 param[0] = 0x71; 906 if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) { 907 atkbd->extra = true; 908 return 2; 909 } 910 } 911 912 if (atkbd_terminal) { 913 ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB); 914 return 3; 915 } 916 917 if (target_set != 3) 918 return 2; 919 920 if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) { 921 atkbd->id = param[0] << 8 | param[1]; 922 return 2; 923 } 924 925 param[0] = 3; 926 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) 927 return 2; 928 929 param[0] = 0; 930 if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET)) 931 return 2; 932 933 if (param[0] != 3) { 934 param[0] = 2; 935 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) 936 return 2; 937 } 938 939 ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR); 940 941 return 3; 942 } 943 944 static int atkbd_reset_state(struct atkbd *atkbd) 945 { 946 struct ps2dev *ps2dev = &atkbd->ps2dev; 947 unsigned char param[1]; 948 949 /* 950 * Set the LEDs to a predefined state (all off). 951 */ 952 953 param[0] = 0; 954 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) 955 return -1; 956 957 /* 958 * Set autorepeat to fastest possible. 959 */ 960 961 param[0] = 0; 962 if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP)) 963 return -1; 964 965 return 0; 966 } 967 968 /* 969 * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a 970 * reboot. 971 */ 972 973 static void atkbd_cleanup(struct serio *serio) 974 { 975 struct atkbd *atkbd = atkbd_from_serio(serio); 976 977 atkbd_disable(atkbd); 978 ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF); 979 } 980 981 982 /* 983 * atkbd_disconnect() closes and frees. 984 */ 985 986 static void atkbd_disconnect(struct serio *serio) 987 { 988 struct atkbd *atkbd = atkbd_from_serio(serio); 989 990 atkbd_disable(atkbd); 991 992 input_unregister_device(atkbd->dev); 993 994 /* 995 * Make sure we don't have a command in flight. 996 * Note that since atkbd->enabled is false event work will keep 997 * rescheduling itself until it gets canceled and will not try 998 * accessing freed input device or serio port. 999 */ 1000 cancel_delayed_work_sync(&atkbd->event_work); 1001 1002 serio_close(serio); 1003 serio_set_drvdata(serio, NULL); 1004 kfree(atkbd); 1005 } 1006 1007 /* 1008 * generate release events for the keycodes given in data 1009 */ 1010 static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd, 1011 const void *data) 1012 { 1013 const unsigned int *keys = data; 1014 unsigned int i; 1015 1016 if (atkbd->set == 2) 1017 for (i = 0; keys[i] != -1U; i++) 1018 __set_bit(keys[i], atkbd->force_release_mask); 1019 } 1020 1021 /* 1022 * Most special keys (Fn+F?) on Dell laptops do not generate release 1023 * events so we have to do it ourselves. 1024 */ 1025 static unsigned int atkbd_dell_laptop_forced_release_keys[] = { 1026 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U 1027 }; 1028 1029 /* 1030 * Perform fixup for HP system that doesn't generate release 1031 * for its video switch 1032 */ 1033 static unsigned int atkbd_hp_forced_release_keys[] = { 1034 0x94, -1U 1035 }; 1036 1037 /* 1038 * Samsung NC10,NC20 with Fn+F? key release not working 1039 */ 1040 static unsigned int atkbd_samsung_forced_release_keys[] = { 1041 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U 1042 }; 1043 1044 /* 1045 * Amilo Pi 3525 key release for Fn+Volume keys not working 1046 */ 1047 static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = { 1048 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U 1049 }; 1050 1051 /* 1052 * Amilo Xi 3650 key release for light touch bar not working 1053 */ 1054 static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { 1055 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U 1056 }; 1057 1058 /* 1059 * Soltech TA12 system with broken key release on volume keys and mute key 1060 */ 1061 static unsigned int atkdb_soltech_ta12_forced_release_keys[] = { 1062 0xa0, 0xae, 0xb0, -1U 1063 }; 1064 1065 /* 1066 * Many notebooks don't send key release event for volume up/down 1067 * keys, with key list below common among them 1068 */ 1069 static unsigned int atkbd_volume_forced_release_keys[] = { 1070 0xae, 0xb0, -1U 1071 }; 1072 1073 /* 1074 * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas 1075 * they should be generating e4-e6 (0x80 | code). 1076 */ 1077 static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd, 1078 unsigned int code) 1079 { 1080 if (atkbd->translated && atkbd->emul == 1 && 1081 (code == 0x64 || code == 0x65 || code == 0x66)) { 1082 atkbd->emul = 0; 1083 code |= 0x80; 1084 } 1085 1086 return code; 1087 } 1088 1089 static int atkbd_get_keymap_from_fwnode(struct atkbd *atkbd) 1090 { 1091 struct device *dev = &atkbd->ps2dev.serio->dev; 1092 int i, n; 1093 u32 *ptr; 1094 u16 scancode, keycode; 1095 1096 /* Parse "linux,keymap" property */ 1097 n = device_property_count_u32(dev, "linux,keymap"); 1098 if (n <= 0 || n > ATKBD_KEYMAP_SIZE) 1099 return -ENXIO; 1100 1101 ptr = kcalloc(n, sizeof(u32), GFP_KERNEL); 1102 if (!ptr) 1103 return -ENOMEM; 1104 1105 if (device_property_read_u32_array(dev, "linux,keymap", ptr, n)) { 1106 dev_err(dev, "problem parsing FW keymap property\n"); 1107 kfree(ptr); 1108 return -EINVAL; 1109 } 1110 1111 memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); 1112 for (i = 0; i < n; i++) { 1113 scancode = SCANCODE(ptr[i]); 1114 keycode = KEYCODE(ptr[i]); 1115 atkbd->keycode[scancode] = keycode; 1116 } 1117 1118 kfree(ptr); 1119 return 0; 1120 } 1121 1122 /* 1123 * atkbd_set_keycode_table() initializes keyboard's keycode table 1124 * according to the selected scancode set 1125 */ 1126 1127 static void atkbd_set_keycode_table(struct atkbd *atkbd) 1128 { 1129 struct device *dev = &atkbd->ps2dev.serio->dev; 1130 unsigned int scancode; 1131 int i, j; 1132 1133 memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); 1134 bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE); 1135 1136 if (!atkbd_get_keymap_from_fwnode(atkbd)) { 1137 dev_dbg(dev, "Using FW keymap\n"); 1138 } else if (atkbd->translated) { 1139 for (i = 0; i < 128; i++) { 1140 scancode = atkbd_unxlate_table[i]; 1141 atkbd->keycode[i] = atkbd_set2_keycode[scancode]; 1142 atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80]; 1143 if (atkbd->scroll) 1144 for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++) 1145 if ((scancode | 0x80) == atkbd_scroll_keys[j].set2) 1146 atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; 1147 } 1148 } else if (atkbd->set == 3) { 1149 memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode)); 1150 } else { 1151 memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); 1152 1153 if (atkbd->scroll) 1154 for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) { 1155 scancode = atkbd_scroll_keys[i].set2; 1156 atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode; 1157 } 1158 } 1159 1160 /* 1161 * HANGEUL and HANJA keys do not send release events so we need to 1162 * generate such events ourselves 1163 */ 1164 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL); 1165 atkbd->keycode[scancode] = KEY_HANGEUL; 1166 __set_bit(scancode, atkbd->force_release_mask); 1167 1168 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA); 1169 atkbd->keycode[scancode] = KEY_HANJA; 1170 __set_bit(scancode, atkbd->force_release_mask); 1171 1172 /* 1173 * Perform additional fixups 1174 */ 1175 if (atkbd_platform_fixup) 1176 atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data); 1177 } 1178 1179 /* 1180 * atkbd_set_device_attrs() sets up keyboard's input device structure 1181 */ 1182 1183 static void atkbd_set_device_attrs(struct atkbd *atkbd) 1184 { 1185 struct input_dev *input_dev = atkbd->dev; 1186 int i; 1187 1188 if (atkbd->extra) 1189 snprintf(atkbd->name, sizeof(atkbd->name), 1190 "AT Set 2 Extra keyboard"); 1191 else 1192 snprintf(atkbd->name, sizeof(atkbd->name), 1193 "AT %s Set %d keyboard", 1194 atkbd->translated ? "Translated" : "Raw", atkbd->set); 1195 1196 snprintf(atkbd->phys, sizeof(atkbd->phys), 1197 "%s/input0", atkbd->ps2dev.serio->phys); 1198 1199 input_dev->name = atkbd->name; 1200 input_dev->phys = atkbd->phys; 1201 input_dev->id.bustype = BUS_I8042; 1202 input_dev->id.vendor = 0x0001; 1203 input_dev->id.product = atkbd->translated ? 1 : atkbd->set; 1204 input_dev->id.version = atkbd->id; 1205 input_dev->event = atkbd_event; 1206 input_dev->dev.parent = &atkbd->ps2dev.serio->dev; 1207 1208 input_set_drvdata(input_dev, atkbd); 1209 1210 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | 1211 BIT_MASK(EV_MSC); 1212 1213 if (atkbd->write) { 1214 input_dev->evbit[0] |= BIT_MASK(EV_LED); 1215 input_dev->ledbit[0] = BIT_MASK(LED_NUML) | 1216 BIT_MASK(LED_CAPSL) | BIT_MASK(LED_SCROLLL); 1217 } 1218 1219 if (atkbd->extra) 1220 input_dev->ledbit[0] |= BIT_MASK(LED_COMPOSE) | 1221 BIT_MASK(LED_SUSPEND) | BIT_MASK(LED_SLEEP) | 1222 BIT_MASK(LED_MUTE) | BIT_MASK(LED_MISC); 1223 1224 if (!atkbd->softrepeat) { 1225 input_dev->rep[REP_DELAY] = 250; 1226 input_dev->rep[REP_PERIOD] = 33; 1227 } 1228 1229 input_dev->mscbit[0] = atkbd->softraw ? BIT_MASK(MSC_SCAN) : 1230 BIT_MASK(MSC_RAW) | BIT_MASK(MSC_SCAN); 1231 1232 if (atkbd->scroll) { 1233 input_dev->evbit[0] |= BIT_MASK(EV_REL); 1234 input_dev->relbit[0] = BIT_MASK(REL_WHEEL) | 1235 BIT_MASK(REL_HWHEEL); 1236 __set_bit(BTN_MIDDLE, input_dev->keybit); 1237 } 1238 1239 input_dev->keycode = atkbd->keycode; 1240 input_dev->keycodesize = sizeof(unsigned short); 1241 input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); 1242 1243 for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) { 1244 if (atkbd->keycode[i] != KEY_RESERVED && 1245 atkbd->keycode[i] != ATKBD_KEY_NULL && 1246 atkbd->keycode[i] < ATKBD_SPECIAL) { 1247 __set_bit(atkbd->keycode[i], input_dev->keybit); 1248 } 1249 } 1250 } 1251 1252 static void atkbd_parse_fwnode_data(struct serio *serio) 1253 { 1254 struct atkbd *atkbd = atkbd_from_serio(serio); 1255 struct device *dev = &serio->dev; 1256 int n; 1257 1258 /* Parse "function-row-physmap" property */ 1259 n = device_property_count_u32(dev, "function-row-physmap"); 1260 if (n > 0 && n <= VIVALDI_MAX_FUNCTION_ROW_KEYS && 1261 !device_property_read_u32_array(dev, "function-row-physmap", 1262 atkbd->vdata.function_row_physmap, 1263 n)) { 1264 atkbd->vdata.num_function_row_keys = n; 1265 dev_dbg(dev, "FW reported %d function-row key locations\n", n); 1266 } 1267 } 1268 1269 /* 1270 * atkbd_connect() is called when the serio module finds an interface 1271 * that isn't handled yet by an appropriate device driver. We check if 1272 * there is an AT keyboard out there and if yes, we register ourselves 1273 * to the input module. 1274 */ 1275 1276 static int atkbd_connect(struct serio *serio, struct serio_driver *drv) 1277 { 1278 struct atkbd *atkbd; 1279 struct input_dev *dev; 1280 int err = -ENOMEM; 1281 1282 atkbd = kzalloc(sizeof(*atkbd), GFP_KERNEL); 1283 dev = input_allocate_device(); 1284 if (!atkbd || !dev) 1285 goto fail1; 1286 1287 atkbd->dev = dev; 1288 ps2_init(&atkbd->ps2dev, serio, 1289 atkbd_pre_receive_byte, atkbd_receive_byte); 1290 INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work); 1291 mutex_init(&atkbd->mutex); 1292 1293 switch (serio->id.type) { 1294 1295 case SERIO_8042_XL: 1296 atkbd->translated = true; 1297 fallthrough; 1298 1299 case SERIO_8042: 1300 if (serio->write) 1301 atkbd->write = true; 1302 break; 1303 } 1304 1305 atkbd->softraw = atkbd_softraw; 1306 atkbd->softrepeat = atkbd_softrepeat; 1307 atkbd->scroll = atkbd_scroll; 1308 1309 if (atkbd->softrepeat) 1310 atkbd->softraw = true; 1311 1312 serio_set_drvdata(serio, atkbd); 1313 1314 err = serio_open(serio, drv); 1315 if (err) 1316 goto fail2; 1317 1318 if (atkbd->write) { 1319 1320 if (atkbd_probe(atkbd)) { 1321 err = -ENODEV; 1322 goto fail3; 1323 } 1324 1325 atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra); 1326 atkbd_reset_state(atkbd); 1327 1328 } else { 1329 atkbd->set = 2; 1330 atkbd->id = 0xab00; 1331 } 1332 1333 atkbd_parse_fwnode_data(serio); 1334 1335 atkbd_set_keycode_table(atkbd); 1336 atkbd_set_device_attrs(atkbd); 1337 1338 atkbd_enable(atkbd); 1339 if (serio->write) 1340 atkbd_activate(atkbd); 1341 1342 err = input_register_device(atkbd->dev); 1343 if (err) 1344 goto fail3; 1345 1346 return 0; 1347 1348 fail3: serio_close(serio); 1349 fail2: serio_set_drvdata(serio, NULL); 1350 fail1: input_free_device(dev); 1351 kfree(atkbd); 1352 return err; 1353 } 1354 1355 /* 1356 * atkbd_reconnect() tries to restore keyboard into a sane state and is 1357 * most likely called on resume. 1358 */ 1359 1360 static int atkbd_reconnect(struct serio *serio) 1361 { 1362 struct atkbd *atkbd = atkbd_from_serio(serio); 1363 struct serio_driver *drv = serio->drv; 1364 int retval = -1; 1365 1366 if (!atkbd || !drv) { 1367 dev_dbg(&serio->dev, 1368 "reconnect request, but serio is disconnected, ignoring...\n"); 1369 return -1; 1370 } 1371 1372 mutex_lock(&atkbd->mutex); 1373 1374 atkbd_disable(atkbd); 1375 1376 if (atkbd->write) { 1377 if (atkbd_probe(atkbd)) 1378 goto out; 1379 1380 if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra)) 1381 goto out; 1382 1383 /* 1384 * Restore LED state and repeat rate. While input core 1385 * will do this for us at resume time reconnect may happen 1386 * because user requested it via sysfs or simply because 1387 * keyboard was unplugged and plugged in again so we need 1388 * to do it ourselves here. 1389 */ 1390 atkbd_set_leds(atkbd); 1391 if (!atkbd->softrepeat) 1392 atkbd_set_repeat_rate(atkbd); 1393 1394 } 1395 1396 /* 1397 * Reset our state machine in case reconnect happened in the middle 1398 * of multi-byte scancode. 1399 */ 1400 atkbd->xl_bit = 0; 1401 atkbd->emul = 0; 1402 1403 atkbd_enable(atkbd); 1404 if (atkbd->write) 1405 atkbd_activate(atkbd); 1406 1407 retval = 0; 1408 1409 out: 1410 mutex_unlock(&atkbd->mutex); 1411 return retval; 1412 } 1413 1414 static const struct serio_device_id atkbd_serio_ids[] = { 1415 { 1416 .type = SERIO_8042, 1417 .proto = SERIO_ANY, 1418 .id = SERIO_ANY, 1419 .extra = SERIO_ANY, 1420 }, 1421 { 1422 .type = SERIO_8042_XL, 1423 .proto = SERIO_ANY, 1424 .id = SERIO_ANY, 1425 .extra = SERIO_ANY, 1426 }, 1427 { 1428 .type = SERIO_RS232, 1429 .proto = SERIO_PS2SER, 1430 .id = SERIO_ANY, 1431 .extra = SERIO_ANY, 1432 }, 1433 { 0 } 1434 }; 1435 1436 MODULE_DEVICE_TABLE(serio, atkbd_serio_ids); 1437 1438 static struct serio_driver atkbd_drv = { 1439 .driver = { 1440 .name = "atkbd", 1441 .dev_groups = atkbd_attribute_groups, 1442 }, 1443 .description = DRIVER_DESC, 1444 .id_table = atkbd_serio_ids, 1445 .interrupt = ps2_interrupt, 1446 .connect = atkbd_connect, 1447 .reconnect = atkbd_reconnect, 1448 .disconnect = atkbd_disconnect, 1449 .cleanup = atkbd_cleanup, 1450 }; 1451 1452 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, 1453 ssize_t (*handler)(struct atkbd *, char *)) 1454 { 1455 struct serio *serio = to_serio_port(dev); 1456 struct atkbd *atkbd = atkbd_from_serio(serio); 1457 1458 return handler(atkbd, buf); 1459 } 1460 1461 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, 1462 ssize_t (*handler)(struct atkbd *, const char *, size_t)) 1463 { 1464 struct serio *serio = to_serio_port(dev); 1465 struct atkbd *atkbd = atkbd_from_serio(serio); 1466 int retval; 1467 1468 retval = mutex_lock_interruptible(&atkbd->mutex); 1469 if (retval) 1470 return retval; 1471 1472 atkbd_disable(atkbd); 1473 retval = handler(atkbd, buf, count); 1474 atkbd_enable(atkbd); 1475 1476 mutex_unlock(&atkbd->mutex); 1477 1478 return retval; 1479 } 1480 1481 static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) 1482 { 1483 return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0); 1484 } 1485 1486 static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count) 1487 { 1488 struct input_dev *old_dev, *new_dev; 1489 unsigned int value; 1490 int err; 1491 bool old_extra; 1492 unsigned char old_set; 1493 1494 if (!atkbd->write) 1495 return -EIO; 1496 1497 err = kstrtouint(buf, 10, &value); 1498 if (err) 1499 return err; 1500 1501 if (value > 1) 1502 return -EINVAL; 1503 1504 if (atkbd->extra != value) { 1505 /* 1506 * Since device's properties will change we need to 1507 * unregister old device. But allocate and register 1508 * new one first to make sure we have it. 1509 */ 1510 old_dev = atkbd->dev; 1511 old_extra = atkbd->extra; 1512 old_set = atkbd->set; 1513 1514 new_dev = input_allocate_device(); 1515 if (!new_dev) 1516 return -ENOMEM; 1517 1518 atkbd->dev = new_dev; 1519 atkbd->set = atkbd_select_set(atkbd, atkbd->set, value); 1520 atkbd_reset_state(atkbd); 1521 atkbd_activate(atkbd); 1522 atkbd_set_keycode_table(atkbd); 1523 atkbd_set_device_attrs(atkbd); 1524 1525 err = input_register_device(atkbd->dev); 1526 if (err) { 1527 input_free_device(new_dev); 1528 1529 atkbd->dev = old_dev; 1530 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); 1531 atkbd_set_keycode_table(atkbd); 1532 atkbd_set_device_attrs(atkbd); 1533 1534 return err; 1535 } 1536 input_unregister_device(old_dev); 1537 1538 } 1539 return count; 1540 } 1541 1542 static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf) 1543 { 1544 size_t len = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", 1545 ATKBD_KEYMAP_SIZE, atkbd->force_release_mask); 1546 1547 buf[len++] = '\n'; 1548 buf[len] = '\0'; 1549 1550 return len; 1551 } 1552 1553 static ssize_t atkbd_set_force_release(struct atkbd *atkbd, 1554 const char *buf, size_t count) 1555 { 1556 /* 64 bytes on stack should be acceptable */ 1557 DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE); 1558 int err; 1559 1560 err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE); 1561 if (err) 1562 return err; 1563 1564 memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask)); 1565 return count; 1566 } 1567 1568 1569 static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) 1570 { 1571 return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0); 1572 } 1573 1574 static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count) 1575 { 1576 struct input_dev *old_dev, *new_dev; 1577 unsigned int value; 1578 int err; 1579 bool old_scroll; 1580 1581 err = kstrtouint(buf, 10, &value); 1582 if (err) 1583 return err; 1584 1585 if (value > 1) 1586 return -EINVAL; 1587 1588 if (atkbd->scroll != value) { 1589 old_dev = atkbd->dev; 1590 old_scroll = atkbd->scroll; 1591 1592 new_dev = input_allocate_device(); 1593 if (!new_dev) 1594 return -ENOMEM; 1595 1596 atkbd->dev = new_dev; 1597 atkbd->scroll = value; 1598 atkbd_set_keycode_table(atkbd); 1599 atkbd_set_device_attrs(atkbd); 1600 1601 err = input_register_device(atkbd->dev); 1602 if (err) { 1603 input_free_device(new_dev); 1604 1605 atkbd->scroll = old_scroll; 1606 atkbd->dev = old_dev; 1607 atkbd_set_keycode_table(atkbd); 1608 atkbd_set_device_attrs(atkbd); 1609 1610 return err; 1611 } 1612 input_unregister_device(old_dev); 1613 } 1614 return count; 1615 } 1616 1617 static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf) 1618 { 1619 return sprintf(buf, "%d\n", atkbd->set); 1620 } 1621 1622 static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) 1623 { 1624 struct input_dev *old_dev, *new_dev; 1625 unsigned int value; 1626 int err; 1627 unsigned char old_set; 1628 bool old_extra; 1629 1630 if (!atkbd->write) 1631 return -EIO; 1632 1633 err = kstrtouint(buf, 10, &value); 1634 if (err) 1635 return err; 1636 1637 if (value != 2 && value != 3) 1638 return -EINVAL; 1639 1640 if (atkbd->set != value) { 1641 old_dev = atkbd->dev; 1642 old_extra = atkbd->extra; 1643 old_set = atkbd->set; 1644 1645 new_dev = input_allocate_device(); 1646 if (!new_dev) 1647 return -ENOMEM; 1648 1649 atkbd->dev = new_dev; 1650 atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra); 1651 atkbd_reset_state(atkbd); 1652 atkbd_activate(atkbd); 1653 atkbd_set_keycode_table(atkbd); 1654 atkbd_set_device_attrs(atkbd); 1655 1656 err = input_register_device(atkbd->dev); 1657 if (err) { 1658 input_free_device(new_dev); 1659 1660 atkbd->dev = old_dev; 1661 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); 1662 atkbd_set_keycode_table(atkbd); 1663 atkbd_set_device_attrs(atkbd); 1664 1665 return err; 1666 } 1667 input_unregister_device(old_dev); 1668 } 1669 return count; 1670 } 1671 1672 static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf) 1673 { 1674 return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0); 1675 } 1676 1677 static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count) 1678 { 1679 struct input_dev *old_dev, *new_dev; 1680 unsigned int value; 1681 int err; 1682 bool old_softrepeat, old_softraw; 1683 1684 if (!atkbd->write) 1685 return -EIO; 1686 1687 err = kstrtouint(buf, 10, &value); 1688 if (err) 1689 return err; 1690 1691 if (value > 1) 1692 return -EINVAL; 1693 1694 if (atkbd->softrepeat != value) { 1695 old_dev = atkbd->dev; 1696 old_softrepeat = atkbd->softrepeat; 1697 old_softraw = atkbd->softraw; 1698 1699 new_dev = input_allocate_device(); 1700 if (!new_dev) 1701 return -ENOMEM; 1702 1703 atkbd->dev = new_dev; 1704 atkbd->softrepeat = value; 1705 if (atkbd->softrepeat) 1706 atkbd->softraw = true; 1707 atkbd_set_device_attrs(atkbd); 1708 1709 err = input_register_device(atkbd->dev); 1710 if (err) { 1711 input_free_device(new_dev); 1712 1713 atkbd->dev = old_dev; 1714 atkbd->softrepeat = old_softrepeat; 1715 atkbd->softraw = old_softraw; 1716 atkbd_set_device_attrs(atkbd); 1717 1718 return err; 1719 } 1720 input_unregister_device(old_dev); 1721 } 1722 return count; 1723 } 1724 1725 1726 static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf) 1727 { 1728 return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0); 1729 } 1730 1731 static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count) 1732 { 1733 struct input_dev *old_dev, *new_dev; 1734 unsigned int value; 1735 int err; 1736 bool old_softraw; 1737 1738 err = kstrtouint(buf, 10, &value); 1739 if (err) 1740 return err; 1741 1742 if (value > 1) 1743 return -EINVAL; 1744 1745 if (atkbd->softraw != value) { 1746 old_dev = atkbd->dev; 1747 old_softraw = atkbd->softraw; 1748 1749 new_dev = input_allocate_device(); 1750 if (!new_dev) 1751 return -ENOMEM; 1752 1753 atkbd->dev = new_dev; 1754 atkbd->softraw = value; 1755 atkbd_set_device_attrs(atkbd); 1756 1757 err = input_register_device(atkbd->dev); 1758 if (err) { 1759 input_free_device(new_dev); 1760 1761 atkbd->dev = old_dev; 1762 atkbd->softraw = old_softraw; 1763 atkbd_set_device_attrs(atkbd); 1764 1765 return err; 1766 } 1767 input_unregister_device(old_dev); 1768 } 1769 return count; 1770 } 1771 1772 static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf) 1773 { 1774 return sprintf(buf, "%lu\n", atkbd->err_count); 1775 } 1776 1777 static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) 1778 { 1779 atkbd_platform_fixup = atkbd_apply_forced_release_keylist; 1780 atkbd_platform_fixup_data = id->driver_data; 1781 1782 return 1; 1783 } 1784 1785 static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) 1786 { 1787 atkbd_platform_scancode_fixup = id->driver_data; 1788 1789 return 1; 1790 } 1791 1792 static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id) 1793 { 1794 atkbd_skip_deactivate = true; 1795 return 1; 1796 } 1797 1798 /* 1799 * NOTE: do not add any more "force release" quirks to this table. The 1800 * task of adjusting list of keys that should be "released" automatically 1801 * by the driver is now delegated to userspace tools, such as udev, so 1802 * submit such quirks there. 1803 */ 1804 static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { 1805 { 1806 .matches = { 1807 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), 1808 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ 1809 }, 1810 .callback = atkbd_setup_forced_release, 1811 .driver_data = atkbd_dell_laptop_forced_release_keys, 1812 }, 1813 { 1814 .matches = { 1815 DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), 1816 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ 1817 }, 1818 .callback = atkbd_setup_forced_release, 1819 .driver_data = atkbd_dell_laptop_forced_release_keys, 1820 }, 1821 { 1822 .matches = { 1823 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1824 DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"), 1825 }, 1826 .callback = atkbd_setup_forced_release, 1827 .driver_data = atkbd_hp_forced_release_keys, 1828 }, 1829 { 1830 .matches = { 1831 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1832 DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), 1833 }, 1834 .callback = atkbd_setup_forced_release, 1835 .driver_data = atkbd_volume_forced_release_keys, 1836 }, 1837 { 1838 .matches = { 1839 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1840 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"), 1841 }, 1842 .callback = atkbd_setup_forced_release, 1843 .driver_data = atkbd_volume_forced_release_keys, 1844 }, 1845 { 1846 .matches = { 1847 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1848 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"), 1849 }, 1850 .callback = atkbd_setup_forced_release, 1851 .driver_data = atkbd_volume_forced_release_keys, 1852 }, 1853 { 1854 .matches = { 1855 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1856 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"), 1857 }, 1858 .callback = atkbd_setup_forced_release, 1859 .driver_data = atkbd_volume_forced_release_keys, 1860 }, 1861 { 1862 /* Inventec Symphony */ 1863 .matches = { 1864 DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), 1865 DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), 1866 }, 1867 .callback = atkbd_setup_forced_release, 1868 .driver_data = atkbd_volume_forced_release_keys, 1869 }, 1870 { 1871 /* Samsung NC10 */ 1872 .matches = { 1873 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), 1874 DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), 1875 }, 1876 .callback = atkbd_setup_forced_release, 1877 .driver_data = atkbd_samsung_forced_release_keys, 1878 }, 1879 { 1880 /* Samsung NC20 */ 1881 .matches = { 1882 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), 1883 DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), 1884 }, 1885 .callback = atkbd_setup_forced_release, 1886 .driver_data = atkbd_samsung_forced_release_keys, 1887 }, 1888 { 1889 /* Samsung SQ45S70S */ 1890 .matches = { 1891 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), 1892 DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), 1893 }, 1894 .callback = atkbd_setup_forced_release, 1895 .driver_data = atkbd_samsung_forced_release_keys, 1896 }, 1897 { 1898 /* Fujitsu Amilo PA 1510 */ 1899 .matches = { 1900 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), 1901 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), 1902 }, 1903 .callback = atkbd_setup_forced_release, 1904 .driver_data = atkbd_volume_forced_release_keys, 1905 }, 1906 { 1907 /* Fujitsu Amilo Pi 3525 */ 1908 .matches = { 1909 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), 1910 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"), 1911 }, 1912 .callback = atkbd_setup_forced_release, 1913 .driver_data = atkbd_amilo_pi3525_forced_release_keys, 1914 }, 1915 { 1916 /* Fujitsu Amilo Xi 3650 */ 1917 .matches = { 1918 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), 1919 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), 1920 }, 1921 .callback = atkbd_setup_forced_release, 1922 .driver_data = atkbd_amilo_xi3650_forced_release_keys, 1923 }, 1924 { 1925 .matches = { 1926 DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"), 1927 DMI_MATCH(DMI_PRODUCT_NAME, "TA12"), 1928 }, 1929 .callback = atkbd_setup_forced_release, 1930 .driver_data = atkdb_soltech_ta12_forced_release_keys, 1931 }, 1932 { 1933 /* OQO Model 01+ */ 1934 .matches = { 1935 DMI_MATCH(DMI_SYS_VENDOR, "OQO"), 1936 DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), 1937 }, 1938 .callback = atkbd_setup_scancode_fixup, 1939 .driver_data = atkbd_oqo_01plus_scancode_fixup, 1940 }, 1941 { 1942 .matches = { 1943 DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), 1944 }, 1945 .callback = atkbd_deactivate_fixup, 1946 }, 1947 { } 1948 }; 1949 1950 static int __init atkbd_init(void) 1951 { 1952 dmi_check_system(atkbd_dmi_quirk_table); 1953 1954 return serio_register_driver(&atkbd_drv); 1955 } 1956 1957 static void __exit atkbd_exit(void) 1958 { 1959 serio_unregister_driver(&atkbd_drv); 1960 } 1961 1962 module_init(atkbd_init); 1963 module_exit(atkbd_exit); 1964