1# 2# Input core configuration 3# 4menuconfig INPUT_KEYBOARD 5 bool "Keyboards" if EMBEDDED || !X86 6 default y 7 help 8 Say Y here, and a list of supported keyboards will be displayed. 9 This option doesn't affect the kernel. 10 11 If unsure, say Y. 12 13if INPUT_KEYBOARD 14 15config KEYBOARD_AAED2000 16 tristate "AAED-2000 keyboard" 17 depends on MACH_AAED2000 18 select INPUT_POLLDEV 19 default y 20 help 21 Say Y here to enable the keyboard on the Agilent AAED-2000 22 development board. 23 24 To compile this driver as a module, choose M here: the 25 module will be called aaed2000_kbd. 26 27config KEYBOARD_AMIGA 28 tristate "Amiga keyboard" 29 depends on AMIGA 30 help 31 Say Y here if you are running Linux on any AMIGA and have a keyboard 32 attached. 33 34 To compile this driver as a module, choose M here: the 35 module will be called amikbd. 36 37config ATARI_KBD_CORE 38 bool 39 40config KEYBOARD_ATARI 41 tristate "Atari keyboard" 42 depends on ATARI 43 select ATARI_KBD_CORE 44 help 45 Say Y here if you are running Linux on any Atari and have a keyboard 46 attached. 47 48 To compile this driver as a module, choose M here: the 49 module will be called atakbd. 50 51config KEYBOARD_ATKBD 52 tristate "AT keyboard" if EMBEDDED || !X86 53 default y 54 select SERIO 55 select SERIO_LIBPS2 56 select SERIO_I8042 if X86 57 select SERIO_GSCPS2 if GSC 58 help 59 Say Y here if you want to use a standard AT or PS/2 keyboard. Usually 60 you'll need this, unless you have a different type keyboard (USB, ADB 61 or other). This also works for AT and PS/2 keyboards connected over a 62 PS/2 to serial converter. 63 64 If unsure, say Y. 65 66 To compile this driver as a module, choose M here: the 67 module will be called atkbd. 68 69config KEYBOARD_ATKBD_HP_KEYCODES 70 bool "Use HP keyboard scancodes" 71 depends on PARISC && KEYBOARD_ATKBD 72 default y 73 help 74 Say Y here if you have a PA-RISC machine and want to use an AT or 75 PS/2 keyboard, and your keyboard uses keycodes that are specific to 76 PA-RISC keyboards. 77 78 Say N if you use a standard keyboard. 79 80config KEYBOARD_ATKBD_RDI_KEYCODES 81 bool "Use PrecisionBook keyboard scancodes" 82 depends on KEYBOARD_ATKBD_HP_KEYCODES 83 default n 84 help 85 If you have an RDI PrecisionBook, say Y here if you want to use its 86 built-in keyboard (as opposed to an external keyboard). 87 88 The PrecisionBook has five keys that conflict with those used by most 89 AT and PS/2 keyboards. These are as follows: 90 91 PrecisionBook Standard AT or PS/2 92 93 F1 F12 94 Left Ctrl Left Alt 95 Caps Lock Left Ctrl 96 Right Ctrl Caps Lock 97 Left 102nd key (the key to the right of Left Shift) 98 99 If you say N here, and use the PrecisionBook keyboard, then each key 100 in the left-hand column will be interpreted as the corresponding key 101 in the right-hand column. 102 103 If you say Y here, and use an external keyboard, then each key in the 104 right-hand column will be interpreted as the key shown in the 105 left-hand column. 106 107config KEYBOARD_BFIN 108 tristate "Blackfin BF54x keypad support" 109 depends on (BF54x && !BF544) 110 help 111 Say Y here if you want to use the BF54x keypad. 112 113 To compile this driver as a module, choose M here: the 114 module will be called bf54x-keys. 115 116config KEYBOARD_CORGI 117 tristate "Corgi keyboard" 118 depends on PXA_SHARPSL 119 default y 120 help 121 Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx 122 series of PDAs. 123 124 To compile this driver as a module, choose M here: the 125 module will be called corgikbd. 126 127config KEYBOARD_LKKBD 128 tristate "DECstation/VAXstation LK201/LK401 keyboard" 129 select SERIO 130 help 131 Say Y here if you want to use a LK201 or LK401 style serial 132 keyboard. This keyboard is also useable on PCs if you attach 133 it with the inputattach program. The connector pinout is 134 described within lkkbd.c. 135 136 To compile this driver as a module, choose M here: the 137 module will be called lkkbd. 138 139config KEYBOARD_EP93XX 140 tristate "EP93xx Matrix Keypad support" 141 depends on ARCH_EP93XX 142 help 143 Say Y here to enable the matrix keypad on the Cirrus EP93XX. 144 145 To compile this driver as a module, choose M here: the 146 module will be called ep93xx_keypad. 147 148config KEYBOARD_GPIO 149 tristate "GPIO Buttons" 150 depends on GENERIC_GPIO 151 help 152 This driver implements support for buttons connected 153 to GPIO pins of various CPUs (and some other chips). 154 155 Say Y here if your device has buttons connected 156 directly to such GPIO pins. Your board-specific 157 setup logic must also provide a platform device, 158 with configuration data saying which GPIOs are used. 159 160 To compile this driver as a module, choose M here: the 161 module will be called gpio_keys. 162 163config KEYBOARD_MATRIX 164 tristate "GPIO driven matrix keypad support" 165 depends on GENERIC_GPIO 166 help 167 Enable support for GPIO driven matrix keypad. 168 169 To compile this driver as a module, choose M here: the 170 module will be called matrix_keypad. 171 172config KEYBOARD_HIL_OLD 173 tristate "HP HIL keyboard support (simple driver)" 174 depends on GSC || HP300 175 default y 176 help 177 The "Human Interface Loop" is a older, 8-channel USB-like 178 controller used in several Hewlett Packard models. This driver 179 was adapted from the one written for m68k/hp300, and implements 180 support for a keyboard attached to the HIL port, but not for 181 any other types of HIL input devices like mice or tablets. 182 However, it has been thoroughly tested and is stable. 183 184 If you want full HIL support including support for multiple 185 keyboards, mice, and tablets, you have to enable the 186 "HP System Device Controller i8042 Support" in the input/serio 187 submenu. 188 189config KEYBOARD_HIL 190 tristate "HP HIL keyboard/pointer support" 191 depends on GSC || HP300 192 default y 193 select HP_SDC 194 select HIL_MLC 195 select SERIO 196 help 197 The "Human Interface Loop" is a older, 8-channel USB-like 198 controller used in several Hewlett Packard models. 199 This driver implements support for HIL-keyboards and pointing 200 devices (mice, tablets, touchscreens) attached 201 to your machine, so normally you should say Y here. 202 203config KEYBOARD_HP6XX 204 tristate "HP Jornada 6xx keyboard" 205 depends on SH_HP6XX 206 select INPUT_POLLDEV 207 help 208 Say Y here if you have a HP Jornada 620/660/680/690 and want to 209 support the built-in keyboard. 210 211 To compile this driver as a module, choose M here: the 212 module will be called jornada680_kbd. 213 214config KEYBOARD_HP7XX 215 tristate "HP Jornada 7xx keyboard" 216 depends on SA1100_JORNADA720_SSP && SA1100_SSP 217 help 218 Say Y here if you have a HP Jornada 710/720/728 and want to 219 support the built-in keyboard. 220 221 To compile this driver as a module, choose M here: the 222 module will be called jornada720_kbd. 223 224config KEYBOARD_LM8323 225 tristate "LM8323 keypad chip" 226 depends on I2C 227 depends on LEDS_CLASS 228 help 229 If you say yes here you get support for the National Semiconductor 230 LM8323 keypad controller. 231 232 To compile this driver as a module, choose M here: the 233 module will be called lm8323. 234 235config KEYBOARD_LOCOMO 236 tristate "LoCoMo Keyboard Support" 237 depends on SHARP_LOCOMO 238 help 239 Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA 240 241 To compile this driver as a module, choose M here: the 242 module will be called locomokbd. 243 244config KEYBOARD_MAPLE 245 tristate "Maple bus keyboard" 246 depends on SH_DREAMCAST && MAPLE 247 help 248 Say Y here if you have a Dreamcast console running Linux and have 249 a keyboard attached to its Maple bus. 250 251 To compile this driver as a module, choose M here: the 252 module will be called maple_keyb. 253 254config KEYBOARD_NEWTON 255 tristate "Newton keyboard" 256 select SERIO 257 help 258 Say Y here if you have a Newton keyboard on a serial port. 259 260 To compile this driver as a module, choose M here: the 261 module will be called newtonkbd. 262 263config KEYBOARD_OPENCORES 264 tristate "OpenCores Keyboard Controller" 265 help 266 Say Y here if you want to use the OpenCores Keyboard Controller 267 http://www.opencores.org/project,keyboardcontroller 268 269 To compile this driver as a module, choose M here; the 270 module will be called opencores-kbd. 271 272config KEYBOARD_PXA27x 273 tristate "PXA27x/PXA3xx keypad support" 274 depends on PXA27x || PXA3xx 275 help 276 Enable support for PXA27x/PXA3xx keypad controller. 277 278 To compile this driver as a module, choose M here: the 279 module will be called pxa27x_keypad. 280 281config KEYBOARD_PXA930_ROTARY 282 tristate "PXA930/PXA935 Enhanced Rotary Controller Support" 283 depends on CPU_PXA930 || CPU_PXA935 284 help 285 Enable support for PXA930/PXA935 Enhanced Rotary Controller. 286 287 To compile this driver as a module, choose M here: the 288 module will be called pxa930_rotary. 289 290config KEYBOARD_SPITZ 291 tristate "Spitz keyboard" 292 depends on PXA_SHARPSL 293 default y 294 help 295 Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, 296 SL-C3000 and Sl-C3100 series of PDAs. 297 298 To compile this driver as a module, choose M here: the 299 module will be called spitzkbd. 300 301config KEYBOARD_STOWAWAY 302 tristate "Stowaway keyboard" 303 select SERIO 304 help 305 Say Y here if you have a Stowaway keyboard on a serial port. 306 Stowaway compatible keyboards like Dicota Input-PDA keyboard 307 are also supported by this driver. 308 309 To compile this driver as a module, choose M here: the 310 module will be called stowaway. 311 312config KEYBOARD_SUNKBD 313 tristate "Sun Type 4 and Type 5 keyboard" 314 select SERIO 315 help 316 Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, 317 connected either to the Sun keyboard connector or to an serial 318 (RS-232) port via a simple adapter. 319 320 To compile this driver as a module, choose M here: the 321 module will be called sunkbd. 322 323config KEYBOARD_SH_KEYSC 324 tristate "SuperH KEYSC keypad support" 325 depends on SUPERH 326 help 327 Say Y here if you want to use a keypad attached to the KEYSC block 328 on SuperH processors such as sh7722 and sh7343. 329 330 To compile this driver as a module, choose M here: the 331 module will be called sh_keysc. 332 333config KEYBOARD_OMAP 334 tristate "TI OMAP keypad support" 335 depends on (ARCH_OMAP1 || ARCH_OMAP2) 336 help 337 Say Y here if you want to use the OMAP keypad. 338 339 To compile this driver as a module, choose M here: the 340 module will be called omap-keypad. 341 342config KEYBOARD_TWL4030 343 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" 344 depends on TWL4030_CORE 345 help 346 Say Y here if your board use the keypad controller on 347 TWL4030 family chips. It's safe to say enable this 348 even on boards that don't use the keypad controller. 349 350 To compile this driver as a module, choose M here: the 351 module will be called twl4030_keypad. 352 353config KEYBOARD_TOSA 354 tristate "Tosa keyboard" 355 depends on MACH_TOSA 356 default y 357 help 358 Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) 359 360 To compile this driver as a module, choose M here: the 361 module will be called tosakbd. 362 363config KEYBOARD_TOSA_USE_EXT_KEYCODES 364 bool "Tosa keyboard: use extended keycodes" 365 depends on KEYBOARD_TOSA 366 help 367 Say Y here to enable the tosa keyboard driver to generate extended 368 (>= 127) keycodes. Be aware, that they can't be correctly interpreted 369 by either console keyboard driver or by Kdrive keybd driver. 370 371 Say Y only if you know, what you are doing! 372 373config KEYBOARD_XTKBD 374 tristate "XT keyboard" 375 select SERIO 376 help 377 Say Y here if you want to use the old IBM PC/XT keyboard (or 378 compatible) on your system. This is only possible with a 379 parallel port keyboard adapter, you cannot connect it to the 380 keyboard port on a PC that runs Linux. 381 382 To compile this driver as a module, choose M here: the 383 module will be called xtkbd. 384 385config KEYBOARD_W90P910 386 tristate "W90P910 Matrix Keypad support" 387 depends on ARCH_W90X900 388 help 389 Say Y here to enable the matrix keypad on evaluation board 390 based on W90P910. 391 392 To compile this driver as a module, choose M here: the 393 module will be called w90p910_keypad. 394 395endif 396