xref: /linux/drivers/input/joystick/iforce/iforce-packets.c (revision 1a59d1b8e05ea6ab45f7e18897de1ef0e6bc3da6)

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
 *  Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com>
 *
 *  USB/RS232 I-Force joysticks and wheels.
 */

/*
 */

#include "iforce.h"

static struct {
	__s32 x;
	__s32 y;
} iforce_hat_to_axis[16] = {{ 0,-1}, { 1,-1}, { 1, 0}, { 1, 1}, { 0, 1}, {-1, 1}, {-1, 0}, {-1,-1}};


void iforce_dump_packet(struct iforce *iforce, char *msg, u16 cmd, unsigned char *data)
{
	dev_dbg(iforce->dev->dev.parent, "%s %s cmd = %04x, data = %*ph\n",
		__func__, msg, cmd, LO(cmd), data);
}

/*
 * Send a packet of bytes to the device
 */
int iforce_send_packet(struct iforce *iforce, u16 cmd, unsigned char* data)
{
	/* Copy data to buffer */
	int n = LO(cmd);
	int c;
	int empty;
	int head, tail;
	unsigned long flags;

/*
 * Update head and tail of xmit buffer
 */
	spin_lock_irqsave(&iforce->xmit_lock, flags);

	head = iforce->xmit.head;
	tail = iforce->xmit.tail;


	if (CIRC_SPACE(head, tail, XMIT_SIZE) < n+2) {
		dev_warn(&iforce->dev->dev,
			 "not enough space in xmit buffer to send new packet\n");
		spin_unlock_irqrestore(&iforce->xmit_lock, flags);
		return -1;
	}

	empty = head == tail;
	XMIT_INC(iforce->xmit.head, n+2);

/*
 * Store packet in xmit buffer
 */
	iforce->xmit.buf[head] = HI(cmd);
	XMIT_INC(head, 1);
	iforce->xmit.buf[head] = LO(cmd);
	XMIT_INC(head, 1);

	c = CIRC_SPACE_TO_END(head, tail, XMIT_SIZE);
	if (n < c) c=n;

	memcpy(&iforce->xmit.buf[head],
	       data,
	       c);
	if (n != c) {
		memcpy(&iforce->xmit.buf[0],
		       data + c,
		       n - c);
	}
	XMIT_INC(head, n);

	spin_unlock_irqrestore(&iforce->xmit_lock, flags);
/*
 * If necessary, start the transmission
 */
	switch (iforce->bus) {

#ifdef CONFIG_JOYSTICK_IFORCE_232
		case IFORCE_232:
		if (empty)
			iforce_serial_xmit(iforce);
		break;
#endif
#ifdef CONFIG_JOYSTICK_IFORCE_USB
		case IFORCE_USB:

		if (iforce->usbdev && empty &&
			!test_and_set_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags)) {

			iforce_usb_xmit(iforce);
		}
		break;
#endif
	}
	return 0;
}

/* Start or stop an effect */
int iforce_control_playback(struct iforce* iforce, u16 id, unsigned int value)
{
	unsigned char data[3];

	data[0] = LO(id);
	data[1] = (value > 0) ? ((value > 1) ? 0x41 : 0x01) : 0;
	data[2] = LO(value);
	return iforce_send_packet(iforce, FF_CMD_PLAY, data);
}

/* Mark an effect that was being updated as ready. That means it can be updated
 * again */
static int mark_core_as_ready(struct iforce *iforce, unsigned short addr)
{
	int i;

	if (!iforce->dev->ff)
		return 0;

	for (i = 0; i < iforce->dev->ff->max_effects; ++i) {
		if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags) &&
		    (iforce->core_effects[i].mod1_chunk.start == addr ||
		     iforce->core_effects[i].mod2_chunk.start == addr)) {
			clear_bit(FF_CORE_UPDATE, iforce->core_effects[i].flags);
			return 0;
		}
	}
	dev_warn(&iforce->dev->dev, "unused effect %04x updated !!!\n", addr);
	return -1;
}

void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data)
{
	struct input_dev *dev = iforce->dev;
	int i;
	static int being_used = 0;

	if (being_used)
		dev_warn(&iforce->dev->dev,
			 "re-entrant call to iforce_process %d\n", being_used);
	being_used++;

#ifdef CONFIG_JOYSTICK_IFORCE_232
	if (HI(iforce->expect_packet) == HI(cmd)) {
		iforce->expect_packet = 0;
		iforce->ecmd = cmd;
		memcpy(iforce->edata, data, IFORCE_MAX_LENGTH);
	}
#endif
	wake_up(&iforce->wait);

	if (!iforce->type) {
		being_used--;
		return;
	}

	switch (HI(cmd)) {

		case 0x01:	/* joystick position data */
		case 0x03:	/* wheel position data */
			if (HI(cmd) == 1) {
				input_report_abs(dev, ABS_X, (__s16) (((__s16)data[1] << 8) | data[0]));
				input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[3] << 8) | data[2]));
				input_report_abs(dev, ABS_THROTTLE, 255 - data[4]);
				if (LO(cmd) >= 8 && test_bit(ABS_RUDDER ,dev->absbit))
					input_report_abs(dev, ABS_RUDDER, (__s8)data[7]);
			} else {
				input_report_abs(dev, ABS_WHEEL, (__s16) (((__s16)data[1] << 8) | data[0]));
				input_report_abs(dev, ABS_GAS,   255 - data[2]);
				input_report_abs(dev, ABS_BRAKE, 255 - data[3]);
			}

			input_report_abs(dev, ABS_HAT0X, iforce_hat_to_axis[data[6] >> 4].x);
			input_report_abs(dev, ABS_HAT0Y, iforce_hat_to_axis[data[6] >> 4].y);

			for (i = 0; iforce->type->btn[i] >= 0; i++)
				input_report_key(dev, iforce->type->btn[i], data[(i >> 3) + 5] & (1 << (i & 7)));

			/* If there are untouched bits left, interpret them as the second hat */
			if (i <= 8) {
				int btns = data[6];
				if (test_bit(ABS_HAT1X, dev->absbit)) {
					if (btns & 8) input_report_abs(dev, ABS_HAT1X, -1);
					else if (btns & 2) input_report_abs(dev, ABS_HAT1X, 1);
					else input_report_abs(dev, ABS_HAT1X, 0);
				}
				if (test_bit(ABS_HAT1Y, dev->absbit)) {
					if (btns & 1) input_report_abs(dev, ABS_HAT1Y, -1);
					else if (btns & 4) input_report_abs(dev, ABS_HAT1Y, 1);
					else input_report_abs(dev, ABS_HAT1Y, 0);
				}
			}

			input_sync(dev);

			break;

		case 0x02:	/* status report */
			input_report_key(dev, BTN_DEAD, data[0] & 0x02);
			input_sync(dev);

			/* Check if an effect was just started or stopped */
			i = data[1] & 0x7f;
			if (data[1] & 0x80) {
				if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) {
					/* Report play event */
					input_report_ff_status(dev, i, FF_STATUS_PLAYING);
				}
			} else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) {
				/* Report stop event */
				input_report_ff_status(dev, i, FF_STATUS_STOPPED);
			}
			if (LO(cmd) > 3) {
				int j;
				for (j = 3; j < LO(cmd); j += 2)
					mark_core_as_ready(iforce, data[j] | (data[j+1]<<8));
			}
			break;
	}
	being_used--;
}

int iforce_get_id_packet(struct iforce *iforce, char *packet)
{
	switch (iforce->bus) {

	case IFORCE_USB: {
#ifdef CONFIG_JOYSTICK_IFORCE_USB
		int status;

		iforce->cr.bRequest = packet[0];
		iforce->ctrl->dev = iforce->usbdev;

		status = usb_submit_urb(iforce->ctrl, GFP_KERNEL);
		if (status) {
			dev_err(&iforce->intf->dev,
				"usb_submit_urb failed %d\n", status);
			return -1;
		}

		wait_event_interruptible_timeout(iforce->wait,
			iforce->ctrl->status != -EINPROGRESS, HZ);

		if (iforce->ctrl->status) {
			dev_dbg(&iforce->intf->dev,
				"iforce->ctrl->status = %d\n",
				iforce->ctrl->status);
			usb_unlink_urb(iforce->ctrl);
			return -1;
		}
#else
		printk(KERN_DEBUG "iforce_get_id_packet: iforce->bus = USB!\n");
#endif
		}
		break;

	case IFORCE_232:

#ifdef CONFIG_JOYSTICK_IFORCE_232
		iforce->expect_packet = FF_CMD_QUERY;
		iforce_send_packet(iforce, FF_CMD_QUERY, packet);

		wait_event_interruptible_timeout(iforce->wait,
			!iforce->expect_packet, HZ);

		if (iforce->expect_packet) {
			iforce->expect_packet = 0;
			return -1;
		}
#else
		dev_err(&iforce->dev->dev,
			"iforce_get_id_packet: iforce->bus = SERIO!\n");
#endif
		break;

	default:
		dev_err(&iforce->dev->dev,
			"iforce_get_id_packet: iforce->bus = %d\n",
			iforce->bus);
		break;
	}

	return -(iforce->edata[0] != packet[0]);
}