1 /* 2 * Copyright (c) 2012 - 2017 Intel Corporation. All rights reserved. 3 * Copyright (c) 2008 - 2012 QLogic Corporation. All rights reserved. 4 * 5 * This software is available to you under a choice of one of two 6 * licenses. You may choose to be licensed under the terms of the GNU 7 * General Public License (GPL) Version 2, available from the file 8 * COPYING in the main directory of this source tree, or the 9 * OpenIB.org BSD license below: 10 * 11 * Redistribution and use in source and binary forms, with or 12 * without modification, are permitted provided that the following 13 * conditions are met: 14 * 15 * - Redistributions of source code must retain the above 16 * copyright notice, this list of conditions and the following 17 * disclaimer. 18 * 19 * - Redistributions in binary form must reproduce the above 20 * copyright notice, this list of conditions and the following 21 * disclaimer in the documentation and/or other materials 22 * provided with the distribution. 23 * 24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 31 * SOFTWARE. 32 */ 33 34 /* 35 * This file contains all of the code that is specific to the 36 * InfiniPath 7322 chip 37 */ 38 39 #include <linux/interrupt.h> 40 #include <linux/pci.h> 41 #include <linux/delay.h> 42 #include <linux/io.h> 43 #include <linux/jiffies.h> 44 #include <linux/module.h> 45 #include <rdma/ib_verbs.h> 46 #include <rdma/ib_smi.h> 47 #ifdef CONFIG_INFINIBAND_QIB_DCA 48 #include <linux/dca.h> 49 #endif 50 51 #include "qib.h" 52 #include "qib_7322_regs.h" 53 #include "qib_qsfp.h" 54 55 #include "qib_mad.h" 56 #include "qib_verbs.h" 57 58 #undef pr_fmt 59 #define pr_fmt(fmt) QIB_DRV_NAME " " fmt 60 61 static void qib_setup_7322_setextled(struct qib_pportdata *, u32); 62 static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t); 63 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op); 64 static irqreturn_t qib_7322intr(int irq, void *data); 65 static irqreturn_t qib_7322bufavail(int irq, void *data); 66 static irqreturn_t sdma_intr(int irq, void *data); 67 static irqreturn_t sdma_idle_intr(int irq, void *data); 68 static irqreturn_t sdma_progress_intr(int irq, void *data); 69 static irqreturn_t sdma_cleanup_intr(int irq, void *data); 70 static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32, 71 struct qib_ctxtdata *rcd); 72 static u8 qib_7322_phys_portstate(u64); 73 static u32 qib_7322_iblink_state(u64); 74 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, 75 u16 linitcmd); 76 static void force_h1(struct qib_pportdata *); 77 static void adj_tx_serdes(struct qib_pportdata *); 78 static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8); 79 static void qib_7322_mini_pcs_reset(struct qib_pportdata *); 80 81 static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32); 82 static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned); 83 static void serdes_7322_los_enable(struct qib_pportdata *, int); 84 static int serdes_7322_init_old(struct qib_pportdata *); 85 static int serdes_7322_init_new(struct qib_pportdata *); 86 static void dump_sdma_7322_state(struct qib_pportdata *); 87 88 #define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb)) 89 90 /* LE2 serdes values for different cases */ 91 #define LE2_DEFAULT 5 92 #define LE2_5m 4 93 #define LE2_QME 0 94 95 /* Below is special-purpose, so only really works for the IB SerDes blocks. */ 96 #define IBSD(hw_pidx) (hw_pidx + 2) 97 98 /* these are variables for documentation and experimentation purposes */ 99 static const unsigned rcv_int_timeout = 375; 100 static const unsigned rcv_int_count = 16; 101 static const unsigned sdma_idle_cnt = 64; 102 103 /* Time to stop altering Rx Equalization parameters, after link up. */ 104 #define RXEQ_DISABLE_MSECS 2500 105 106 /* 107 * Number of VLs we are configured to use (to allow for more 108 * credits per vl, etc.) 109 */ 110 ushort qib_num_cfg_vls = 2; 111 module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO); 112 MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)"); 113 114 static ushort qib_chase = 1; 115 module_param_named(chase, qib_chase, ushort, S_IRUGO); 116 MODULE_PARM_DESC(chase, "Enable state chase handling"); 117 118 static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */ 119 module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO); 120 MODULE_PARM_DESC(long_attenuation, 121 "attenuation cutoff (dB) for long copper cable setup"); 122 123 static ushort qib_singleport; 124 module_param_named(singleport, qib_singleport, ushort, S_IRUGO); 125 MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space"); 126 127 static ushort qib_krcvq01_no_msi; 128 module_param_named(krcvq01_no_msi, qib_krcvq01_no_msi, ushort, S_IRUGO); 129 MODULE_PARM_DESC(krcvq01_no_msi, "No MSI for kctx < 2"); 130 131 /* 132 * Receive header queue sizes 133 */ 134 static unsigned qib_rcvhdrcnt; 135 module_param_named(rcvhdrcnt, qib_rcvhdrcnt, uint, S_IRUGO); 136 MODULE_PARM_DESC(rcvhdrcnt, "receive header count"); 137 138 static unsigned qib_rcvhdrsize; 139 module_param_named(rcvhdrsize, qib_rcvhdrsize, uint, S_IRUGO); 140 MODULE_PARM_DESC(rcvhdrsize, "receive header size in 32-bit words"); 141 142 static unsigned qib_rcvhdrentsize; 143 module_param_named(rcvhdrentsize, qib_rcvhdrentsize, uint, S_IRUGO); 144 MODULE_PARM_DESC(rcvhdrentsize, "receive header entry size in 32-bit words"); 145 146 #define MAX_ATTEN_LEN 64 /* plenty for any real system */ 147 /* for read back, default index is ~5m copper cable */ 148 static char txselect_list[MAX_ATTEN_LEN] = "10"; 149 static struct kparam_string kp_txselect = { 150 .string = txselect_list, 151 .maxlen = MAX_ATTEN_LEN 152 }; 153 static int setup_txselect(const char *, const struct kernel_param *); 154 module_param_call(txselect, setup_txselect, param_get_string, 155 &kp_txselect, S_IWUSR | S_IRUGO); 156 MODULE_PARM_DESC(txselect, 157 "Tx serdes indices (for no QSFP or invalid QSFP data)"); 158 159 #define BOARD_QME7342 5 160 #define BOARD_QMH7342 6 161 #define BOARD_QMH7360 9 162 #define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ 163 BOARD_QMH7342) 164 #define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ 165 BOARD_QME7342) 166 167 #define KREG_IDX(regname) (QIB_7322_##regname##_OFFS / sizeof(u64)) 168 169 #define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64))) 170 171 #define MASK_ACROSS(lsb, msb) \ 172 (((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb)) 173 174 #define SYM_RMASK(regname, fldname) ((u64) \ 175 QIB_7322_##regname##_##fldname##_RMASK) 176 177 #define SYM_MASK(regname, fldname) ((u64) \ 178 QIB_7322_##regname##_##fldname##_RMASK << \ 179 QIB_7322_##regname##_##fldname##_LSB) 180 181 #define SYM_FIELD(value, regname, fldname) ((u64) \ 182 (((value) >> SYM_LSB(regname, fldname)) & \ 183 SYM_RMASK(regname, fldname))) 184 185 /* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */ 186 #define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \ 187 (((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits)) 188 189 #define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) 190 #define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) 191 #define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask) 192 #define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask) 193 #define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port) 194 /* Below because most, but not all, fields of IntMask have that full suffix */ 195 #define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port) 196 197 198 #define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB) 199 200 /* 201 * the size bits give us 2^N, in KB units. 0 marks as invalid, 202 * and 7 is reserved. We currently use only 2KB and 4KB 203 */ 204 #define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB 205 #define IBA7322_TID_SZ_2K (1UL<<IBA7322_TID_SZ_SHIFT) /* 2KB */ 206 #define IBA7322_TID_SZ_4K (2UL<<IBA7322_TID_SZ_SHIFT) /* 4KB */ 207 #define IBA7322_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */ 208 209 #define SendIBSLIDAssignMask \ 210 QIB_7322_SendIBSLIDAssign_0_SendIBSLIDAssign_15_0_RMASK 211 #define SendIBSLMCMask \ 212 QIB_7322_SendIBSLIDMask_0_SendIBSLIDMask_15_0_RMASK 213 214 #define ExtLED_IB1_YEL SYM_MASK(EXTCtrl, LEDPort0YellowOn) 215 #define ExtLED_IB1_GRN SYM_MASK(EXTCtrl, LEDPort0GreenOn) 216 #define ExtLED_IB2_YEL SYM_MASK(EXTCtrl, LEDPort1YellowOn) 217 #define ExtLED_IB2_GRN SYM_MASK(EXTCtrl, LEDPort1GreenOn) 218 #define ExtLED_IB1_MASK (ExtLED_IB1_YEL | ExtLED_IB1_GRN) 219 #define ExtLED_IB2_MASK (ExtLED_IB2_YEL | ExtLED_IB2_GRN) 220 221 #define _QIB_GPIO_SDA_NUM 1 222 #define _QIB_GPIO_SCL_NUM 0 223 #define QIB_EEPROM_WEN_NUM 14 224 #define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7322 cards. */ 225 226 /* HW counter clock is at 4nsec */ 227 #define QIB_7322_PSXMITWAIT_CHECK_RATE 4000 228 229 /* full speed IB port 1 only */ 230 #define PORT_SPD_CAP (QIB_IB_SDR | QIB_IB_DDR | QIB_IB_QDR) 231 #define PORT_SPD_CAP_SHIFT 3 232 233 /* full speed featuremask, both ports */ 234 #define DUAL_PORT_CAP (PORT_SPD_CAP | (PORT_SPD_CAP << PORT_SPD_CAP_SHIFT)) 235 236 /* 237 * This file contains almost all the chip-specific register information and 238 * access functions for the FAKED QLogic InfiniPath 7322 PCI-Express chip. 239 */ 240 241 /* Use defines to tie machine-generated names to lower-case names */ 242 #define kr_contextcnt KREG_IDX(ContextCnt) 243 #define kr_control KREG_IDX(Control) 244 #define kr_counterregbase KREG_IDX(CntrRegBase) 245 #define kr_errclear KREG_IDX(ErrClear) 246 #define kr_errmask KREG_IDX(ErrMask) 247 #define kr_errstatus KREG_IDX(ErrStatus) 248 #define kr_extctrl KREG_IDX(EXTCtrl) 249 #define kr_extstatus KREG_IDX(EXTStatus) 250 #define kr_gpio_clear KREG_IDX(GPIOClear) 251 #define kr_gpio_mask KREG_IDX(GPIOMask) 252 #define kr_gpio_out KREG_IDX(GPIOOut) 253 #define kr_gpio_status KREG_IDX(GPIOStatus) 254 #define kr_hwdiagctrl KREG_IDX(HwDiagCtrl) 255 #define kr_debugportval KREG_IDX(DebugPortValueReg) 256 #define kr_fmask KREG_IDX(feature_mask) 257 #define kr_act_fmask KREG_IDX(active_feature_mask) 258 #define kr_hwerrclear KREG_IDX(HwErrClear) 259 #define kr_hwerrmask KREG_IDX(HwErrMask) 260 #define kr_hwerrstatus KREG_IDX(HwErrStatus) 261 #define kr_intclear KREG_IDX(IntClear) 262 #define kr_intmask KREG_IDX(IntMask) 263 #define kr_intredirect KREG_IDX(IntRedirect0) 264 #define kr_intstatus KREG_IDX(IntStatus) 265 #define kr_pagealign KREG_IDX(PageAlign) 266 #define kr_rcvavailtimeout KREG_IDX(RcvAvailTimeOut0) 267 #define kr_rcvctrl KREG_IDX(RcvCtrl) /* Common, but chip also has per-port */ 268 #define kr_rcvegrbase KREG_IDX(RcvEgrBase) 269 #define kr_rcvegrcnt KREG_IDX(RcvEgrCnt) 270 #define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt) 271 #define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize) 272 #define kr_rcvhdrsize KREG_IDX(RcvHdrSize) 273 #define kr_rcvtidbase KREG_IDX(RcvTIDBase) 274 #define kr_rcvtidcnt KREG_IDX(RcvTIDCnt) 275 #define kr_revision KREG_IDX(Revision) 276 #define kr_scratch KREG_IDX(Scratch) 277 #define kr_sendbuffererror KREG_IDX(SendBufErr0) /* and base for 1 and 2 */ 278 #define kr_sendcheckmask KREG_IDX(SendCheckMask0) /* and 1, 2 */ 279 #define kr_sendctrl KREG_IDX(SendCtrl) 280 #define kr_sendgrhcheckmask KREG_IDX(SendGRHCheckMask0) /* and 1, 2 */ 281 #define kr_sendibpktmask KREG_IDX(SendIBPacketMask0) /* and 1, 2 */ 282 #define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr) 283 #define kr_sendpiobufbase KREG_IDX(SendBufBase) 284 #define kr_sendpiobufcnt KREG_IDX(SendBufCnt) 285 #define kr_sendpiosize KREG_IDX(SendBufSize) 286 #define kr_sendregbase KREG_IDX(SendRegBase) 287 #define kr_sendbufavail0 KREG_IDX(SendBufAvail0) 288 #define kr_userregbase KREG_IDX(UserRegBase) 289 #define kr_intgranted KREG_IDX(Int_Granted) 290 #define kr_vecclr_wo_int KREG_IDX(vec_clr_without_int) 291 #define kr_intblocked KREG_IDX(IntBlocked) 292 #define kr_r_access KREG_IDX(SPC_JTAG_ACCESS_REG) 293 294 /* 295 * per-port kernel registers. Access only with qib_read_kreg_port() 296 * or qib_write_kreg_port() 297 */ 298 #define krp_errclear KREG_IBPORT_IDX(ErrClear) 299 #define krp_errmask KREG_IBPORT_IDX(ErrMask) 300 #define krp_errstatus KREG_IBPORT_IDX(ErrStatus) 301 #define krp_highprio_0 KREG_IBPORT_IDX(HighPriority0) 302 #define krp_highprio_limit KREG_IBPORT_IDX(HighPriorityLimit) 303 #define krp_hrtbt_guid KREG_IBPORT_IDX(HRTBT_GUID) 304 #define krp_ib_pcsconfig KREG_IBPORT_IDX(IBPCSConfig) 305 #define krp_ibcctrl_a KREG_IBPORT_IDX(IBCCtrlA) 306 #define krp_ibcctrl_b KREG_IBPORT_IDX(IBCCtrlB) 307 #define krp_ibcctrl_c KREG_IBPORT_IDX(IBCCtrlC) 308 #define krp_ibcstatus_a KREG_IBPORT_IDX(IBCStatusA) 309 #define krp_ibcstatus_b KREG_IBPORT_IDX(IBCStatusB) 310 #define krp_txestatus KREG_IBPORT_IDX(TXEStatus) 311 #define krp_lowprio_0 KREG_IBPORT_IDX(LowPriority0) 312 #define krp_ncmodectrl KREG_IBPORT_IDX(IBNCModeCtrl) 313 #define krp_partitionkey KREG_IBPORT_IDX(RcvPartitionKey) 314 #define krp_psinterval KREG_IBPORT_IDX(PSInterval) 315 #define krp_psstart KREG_IBPORT_IDX(PSStart) 316 #define krp_psstat KREG_IBPORT_IDX(PSStat) 317 #define krp_rcvbthqp KREG_IBPORT_IDX(RcvBTHQP) 318 #define krp_rcvctrl KREG_IBPORT_IDX(RcvCtrl) 319 #define krp_rcvpktledcnt KREG_IBPORT_IDX(RcvPktLEDCnt) 320 #define krp_rcvqpmaptable KREG_IBPORT_IDX(RcvQPMapTableA) 321 #define krp_rxcreditvl0 KREG_IBPORT_IDX(RxCreditVL0) 322 #define krp_rxcreditvl15 (KREG_IBPORT_IDX(RxCreditVL0)+15) 323 #define krp_sendcheckcontrol KREG_IBPORT_IDX(SendCheckControl) 324 #define krp_sendctrl KREG_IBPORT_IDX(SendCtrl) 325 #define krp_senddmabase KREG_IBPORT_IDX(SendDmaBase) 326 #define krp_senddmabufmask0 KREG_IBPORT_IDX(SendDmaBufMask0) 327 #define krp_senddmabufmask1 (KREG_IBPORT_IDX(SendDmaBufMask0) + 1) 328 #define krp_senddmabufmask2 (KREG_IBPORT_IDX(SendDmaBufMask0) + 2) 329 #define krp_senddmabuf_use0 KREG_IBPORT_IDX(SendDmaBufUsed0) 330 #define krp_senddmabuf_use1 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 1) 331 #define krp_senddmabuf_use2 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 2) 332 #define krp_senddmadesccnt KREG_IBPORT_IDX(SendDmaDescCnt) 333 #define krp_senddmahead KREG_IBPORT_IDX(SendDmaHead) 334 #define krp_senddmaheadaddr KREG_IBPORT_IDX(SendDmaHeadAddr) 335 #define krp_senddmaidlecnt KREG_IBPORT_IDX(SendDmaIdleCnt) 336 #define krp_senddmalengen KREG_IBPORT_IDX(SendDmaLenGen) 337 #define krp_senddmaprioritythld KREG_IBPORT_IDX(SendDmaPriorityThld) 338 #define krp_senddmareloadcnt KREG_IBPORT_IDX(SendDmaReloadCnt) 339 #define krp_senddmastatus KREG_IBPORT_IDX(SendDmaStatus) 340 #define krp_senddmatail KREG_IBPORT_IDX(SendDmaTail) 341 #define krp_sendhdrsymptom KREG_IBPORT_IDX(SendHdrErrSymptom) 342 #define krp_sendslid KREG_IBPORT_IDX(SendIBSLIDAssign) 343 #define krp_sendslidmask KREG_IBPORT_IDX(SendIBSLIDMask) 344 #define krp_ibsdtestiftx KREG_IBPORT_IDX(IB_SDTEST_IF_TX) 345 #define krp_adapt_dis_timer KREG_IBPORT_IDX(ADAPT_DISABLE_TIMER_THRESHOLD) 346 #define krp_tx_deemph_override KREG_IBPORT_IDX(IBSD_TX_DEEMPHASIS_OVERRIDE) 347 #define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl) 348 349 /* 350 * Per-context kernel registers. Access only with qib_read_kreg_ctxt() 351 * or qib_write_kreg_ctxt() 352 */ 353 #define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0) 354 #define krc_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0) 355 356 /* 357 * TID Flow table, per context. Reduces 358 * number of hdrq updates to one per flow (or on errors). 359 * context 0 and 1 share same memory, but have distinct 360 * addresses. Since for now, we never use expected sends 361 * on kernel contexts, we don't worry about that (we initialize 362 * those entries for ctxt 0/1 on driver load twice, for example). 363 */ 364 #define NUM_TIDFLOWS_CTXT 0x20 /* 0x20 per context; have to hardcode */ 365 #define ur_rcvflowtable (KREG_IDX(RcvTIDFlowTable0) - KREG_IDX(RcvHdrTail0)) 366 367 /* these are the error bits in the tid flows, and are W1C */ 368 #define TIDFLOW_ERRBITS ( \ 369 (SYM_MASK(RcvTIDFlowTable0, GenMismatch) << \ 370 SYM_LSB(RcvTIDFlowTable0, GenMismatch)) | \ 371 (SYM_MASK(RcvTIDFlowTable0, SeqMismatch) << \ 372 SYM_LSB(RcvTIDFlowTable0, SeqMismatch))) 373 374 /* Most (not all) Counters are per-IBport. 375 * Requires LBIntCnt is at offset 0 in the group 376 */ 377 #define CREG_IDX(regname) \ 378 ((QIB_7322_##regname##_0_OFFS - QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) 379 380 #define crp_badformat CREG_IDX(RxVersionErrCnt) 381 #define crp_err_rlen CREG_IDX(RxLenErrCnt) 382 #define crp_erricrc CREG_IDX(RxICRCErrCnt) 383 #define crp_errlink CREG_IDX(RxLinkMalformCnt) 384 #define crp_errlpcrc CREG_IDX(RxLPCRCErrCnt) 385 #define crp_errpkey CREG_IDX(RxPKeyMismatchCnt) 386 #define crp_errvcrc CREG_IDX(RxVCRCErrCnt) 387 #define crp_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt) 388 #define crp_iblinkdown CREG_IDX(IBLinkDownedCnt) 389 #define crp_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt) 390 #define crp_ibstatuschange CREG_IDX(IBStatusChangeCnt) 391 #define crp_ibsymbolerr CREG_IDX(IBSymbolErrCnt) 392 #define crp_invalidrlen CREG_IDX(RxMaxMinLenErrCnt) 393 #define crp_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt) 394 #define crp_pktrcv CREG_IDX(RxDataPktCnt) 395 #define crp_pktrcvflowctrl CREG_IDX(RxFlowPktCnt) 396 #define crp_pktsend CREG_IDX(TxDataPktCnt) 397 #define crp_pktsendflow CREG_IDX(TxFlowPktCnt) 398 #define crp_psrcvdatacount CREG_IDX(PSRcvDataCount) 399 #define crp_psrcvpktscount CREG_IDX(PSRcvPktsCount) 400 #define crp_psxmitdatacount CREG_IDX(PSXmitDataCount) 401 #define crp_psxmitpktscount CREG_IDX(PSXmitPktsCount) 402 #define crp_psxmitwaitcount CREG_IDX(PSXmitWaitCount) 403 #define crp_rcvebp CREG_IDX(RxEBPCnt) 404 #define crp_rcvflowctrlviol CREG_IDX(RxFlowCtrlViolCnt) 405 #define crp_rcvovfl CREG_IDX(RxBufOvflCnt) 406 #define crp_rxdlidfltr CREG_IDX(RxDlidFltrCnt) 407 #define crp_rxdroppkt CREG_IDX(RxDroppedPktCnt) 408 #define crp_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt) 409 #define crp_rxqpinvalidctxt CREG_IDX(RxQPInvalidContextCnt) 410 #define crp_rxvlerr CREG_IDX(RxVlErrCnt) 411 #define crp_sendstall CREG_IDX(TxFlowStallCnt) 412 #define crp_txdroppedpkt CREG_IDX(TxDroppedPktCnt) 413 #define crp_txhdrerr CREG_IDX(TxHeadersErrCnt) 414 #define crp_txlenerr CREG_IDX(TxLenErrCnt) 415 #define crp_txminmaxlenerr CREG_IDX(TxMaxMinLenErrCnt) 416 #define crp_txsdmadesc CREG_IDX(TxSDmaDescCnt) 417 #define crp_txunderrun CREG_IDX(TxUnderrunCnt) 418 #define crp_txunsupvl CREG_IDX(TxUnsupVLErrCnt) 419 #define crp_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt) 420 #define crp_wordrcv CREG_IDX(RxDwordCnt) 421 #define crp_wordsend CREG_IDX(TxDwordCnt) 422 #define crp_tx_creditstalls CREG_IDX(TxCreditUpToDateTimeOut) 423 424 /* these are the (few) counters that are not port-specific */ 425 #define CREG_DEVIDX(regname) ((QIB_7322_##regname##_OFFS - \ 426 QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) 427 #define cr_base_egrovfl CREG_DEVIDX(RxP0HdrEgrOvflCnt) 428 #define cr_lbint CREG_DEVIDX(LBIntCnt) 429 #define cr_lbstall CREG_DEVIDX(LBFlowStallCnt) 430 #define cr_pcieretrydiag CREG_DEVIDX(PcieRetryBufDiagQwordCnt) 431 #define cr_rxtidflowdrop CREG_DEVIDX(RxTidFlowDropCnt) 432 #define cr_tidfull CREG_DEVIDX(RxTIDFullErrCnt) 433 #define cr_tidinvalid CREG_DEVIDX(RxTIDValidErrCnt) 434 435 /* no chip register for # of IB ports supported, so define */ 436 #define NUM_IB_PORTS 2 437 438 /* 1 VL15 buffer per hardware IB port, no register for this, so define */ 439 #define NUM_VL15_BUFS NUM_IB_PORTS 440 441 /* 442 * context 0 and 1 are special, and there is no chip register that 443 * defines this value, so we have to define it here. 444 * These are all allocated to either 0 or 1 for single port 445 * hardware configuration, otherwise each gets half 446 */ 447 #define KCTXT0_EGRCNT 2048 448 449 /* values for vl and port fields in PBC, 7322-specific */ 450 #define PBC_PORT_SEL_LSB 26 451 #define PBC_PORT_SEL_RMASK 1 452 #define PBC_VL_NUM_LSB 27 453 #define PBC_VL_NUM_RMASK 7 454 #define PBC_7322_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */ 455 #define PBC_7322_VL15_SEND_CTRL (1ULL << 31) /* control version of same */ 456 457 static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { 458 [IB_RATE_2_5_GBPS] = 16, 459 [IB_RATE_5_GBPS] = 8, 460 [IB_RATE_10_GBPS] = 4, 461 [IB_RATE_20_GBPS] = 2, 462 [IB_RATE_30_GBPS] = 2, 463 [IB_RATE_40_GBPS] = 1 464 }; 465 466 static const char * const qib_sdma_state_names[] = { 467 [qib_sdma_state_s00_hw_down] = "s00_HwDown", 468 [qib_sdma_state_s10_hw_start_up_wait] = "s10_HwStartUpWait", 469 [qib_sdma_state_s20_idle] = "s20_Idle", 470 [qib_sdma_state_s30_sw_clean_up_wait] = "s30_SwCleanUpWait", 471 [qib_sdma_state_s40_hw_clean_up_wait] = "s40_HwCleanUpWait", 472 [qib_sdma_state_s50_hw_halt_wait] = "s50_HwHaltWait", 473 [qib_sdma_state_s99_running] = "s99_Running", 474 }; 475 476 #define IBA7322_LINKSPEED_SHIFT SYM_LSB(IBCStatusA_0, LinkSpeedActive) 477 #define IBA7322_LINKWIDTH_SHIFT SYM_LSB(IBCStatusA_0, LinkWidthActive) 478 479 /* link training states, from IBC */ 480 #define IB_7322_LT_STATE_DISABLED 0x00 481 #define IB_7322_LT_STATE_LINKUP 0x01 482 #define IB_7322_LT_STATE_POLLACTIVE 0x02 483 #define IB_7322_LT_STATE_POLLQUIET 0x03 484 #define IB_7322_LT_STATE_SLEEPDELAY 0x04 485 #define IB_7322_LT_STATE_SLEEPQUIET 0x05 486 #define IB_7322_LT_STATE_CFGDEBOUNCE 0x08 487 #define IB_7322_LT_STATE_CFGRCVFCFG 0x09 488 #define IB_7322_LT_STATE_CFGWAITRMT 0x0a 489 #define IB_7322_LT_STATE_CFGIDLE 0x0b 490 #define IB_7322_LT_STATE_RECOVERRETRAIN 0x0c 491 #define IB_7322_LT_STATE_TXREVLANES 0x0d 492 #define IB_7322_LT_STATE_RECOVERWAITRMT 0x0e 493 #define IB_7322_LT_STATE_RECOVERIDLE 0x0f 494 #define IB_7322_LT_STATE_CFGENH 0x10 495 #define IB_7322_LT_STATE_CFGTEST 0x11 496 #define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12 497 #define IB_7322_LT_STATE_CFGWAITENH 0x13 498 499 /* link state machine states from IBC */ 500 #define IB_7322_L_STATE_DOWN 0x0 501 #define IB_7322_L_STATE_INIT 0x1 502 #define IB_7322_L_STATE_ARM 0x2 503 #define IB_7322_L_STATE_ACTIVE 0x3 504 #define IB_7322_L_STATE_ACT_DEFER 0x4 505 506 static const u8 qib_7322_physportstate[0x20] = { 507 [IB_7322_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, 508 [IB_7322_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, 509 [IB_7322_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, 510 [IB_7322_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, 511 [IB_7322_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, 512 [IB_7322_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, 513 [IB_7322_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN, 514 [IB_7322_LT_STATE_CFGRCVFCFG] = 515 IB_PHYSPORTSTATE_CFG_TRAIN, 516 [IB_7322_LT_STATE_CFGWAITRMT] = 517 IB_PHYSPORTSTATE_CFG_TRAIN, 518 [IB_7322_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_IDLE, 519 [IB_7322_LT_STATE_RECOVERRETRAIN] = 520 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 521 [IB_7322_LT_STATE_RECOVERWAITRMT] = 522 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 523 [IB_7322_LT_STATE_RECOVERIDLE] = 524 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 525 [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH, 526 [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN, 527 [IB_7322_LT_STATE_CFGWAITRMTTEST] = 528 IB_PHYSPORTSTATE_CFG_TRAIN, 529 [IB_7322_LT_STATE_CFGWAITENH] = 530 IB_PHYSPORTSTATE_CFG_WAIT_ENH, 531 [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, 532 [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, 533 [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, 534 [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN 535 }; 536 537 #ifdef CONFIG_INFINIBAND_QIB_DCA 538 struct qib_irq_notify { 539 int rcv; 540 void *arg; 541 struct irq_affinity_notify notify; 542 }; 543 #endif 544 545 struct qib_chip_specific { 546 u64 __iomem *cregbase; 547 u64 *cntrs; 548 spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */ 549 spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */ 550 u64 main_int_mask; /* clear bits which have dedicated handlers */ 551 u64 int_enable_mask; /* for per port interrupts in single port mode */ 552 u64 errormask; 553 u64 hwerrmask; 554 u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */ 555 u64 gpio_mask; /* shadow the gpio mask register */ 556 u64 extctrl; /* shadow the gpio output enable, etc... */ 557 u32 ncntrs; 558 u32 nportcntrs; 559 u32 cntrnamelen; 560 u32 portcntrnamelen; 561 u32 numctxts; 562 u32 rcvegrcnt; 563 u32 updthresh; /* current AvailUpdThld */ 564 u32 updthresh_dflt; /* default AvailUpdThld */ 565 u32 r1; 566 u32 num_msix_entries; 567 u32 sdmabufcnt; 568 u32 lastbuf_for_pio; 569 u32 stay_in_freeze; 570 u32 recovery_ports_initted; 571 #ifdef CONFIG_INFINIBAND_QIB_DCA 572 u32 dca_ctrl; 573 int rhdr_cpu[18]; 574 int sdma_cpu[2]; 575 u64 dca_rcvhdr_ctrl[5]; /* B, C, D, E, F */ 576 #endif 577 struct qib_msix_entry *msix_entries; 578 unsigned long *sendchkenable; 579 unsigned long *sendgrhchk; 580 unsigned long *sendibchk; 581 u32 rcvavail_timeout[18]; 582 char emsgbuf[128]; /* for device error interrupt msg buffer */ 583 }; 584 585 /* Table of entries in "human readable" form Tx Emphasis. */ 586 struct txdds_ent { 587 u8 amp; 588 u8 pre; 589 u8 main; 590 u8 post; 591 }; 592 593 struct vendor_txdds_ent { 594 u8 oui[QSFP_VOUI_LEN]; 595 u8 *partnum; 596 struct txdds_ent sdr; 597 struct txdds_ent ddr; 598 struct txdds_ent qdr; 599 }; 600 601 static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *); 602 603 #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */ 604 #define TXDDS_EXTRA_SZ 18 /* number of extra tx settings entries */ 605 #define TXDDS_MFG_SZ 2 /* number of mfg tx settings entries */ 606 #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */ 607 608 #define H1_FORCE_VAL 8 609 #define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */ 610 #define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */ 611 612 /* The static and dynamic registers are paired, and the pairs indexed by spd */ 613 #define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \ 614 + ((spd) * 2)) 615 616 #define QDR_DFE_DISABLE_DELAY 4000 /* msec after LINKUP */ 617 #define QDR_STATIC_ADAPT_DOWN 0xf0f0f0f0ULL /* link down, H1-H4 QDR adapts */ 618 #define QDR_STATIC_ADAPT_DOWN_R1 0ULL /* r1 link down, H1-H4 QDR adapts */ 619 #define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */ 620 #define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */ 621 622 struct qib_chippport_specific { 623 u64 __iomem *kpregbase; 624 u64 __iomem *cpregbase; 625 u64 *portcntrs; 626 struct qib_pportdata *ppd; 627 wait_queue_head_t autoneg_wait; 628 struct delayed_work autoneg_work; 629 struct delayed_work ipg_work; 630 struct timer_list chase_timer; 631 /* 632 * these 5 fields are used to establish deltas for IB symbol 633 * errors and linkrecovery errors. They can be reported on 634 * some chips during link negotiation prior to INIT, and with 635 * DDR when faking DDR negotiations with non-IBTA switches. 636 * The chip counters are adjusted at driver unload if there is 637 * a non-zero delta. 638 */ 639 u64 ibdeltainprog; 640 u64 ibsymdelta; 641 u64 ibsymsnap; 642 u64 iblnkerrdelta; 643 u64 iblnkerrsnap; 644 u64 iblnkdownsnap; 645 u64 iblnkdowndelta; 646 u64 ibmalfdelta; 647 u64 ibmalfsnap; 648 u64 ibcctrl_a; /* krp_ibcctrl_a shadow */ 649 u64 ibcctrl_b; /* krp_ibcctrl_b shadow */ 650 unsigned long qdr_dfe_time; 651 unsigned long chase_end; 652 u32 autoneg_tries; 653 u32 recovery_init; 654 u32 qdr_dfe_on; 655 u32 qdr_reforce; 656 /* 657 * Per-bay per-channel rcv QMH H1 values and Tx values for QDR. 658 * entry zero is unused, to simplify indexing 659 */ 660 u8 h1_val; 661 u8 no_eep; /* txselect table index to use if no qsfp info */ 662 u8 ipg_tries; 663 u8 ibmalfusesnap; 664 struct qib_qsfp_data qsfp_data; 665 char epmsgbuf[192]; /* for port error interrupt msg buffer */ 666 char sdmamsgbuf[192]; /* for per-port sdma error messages */ 667 }; 668 669 static struct { 670 const char *name; 671 irq_handler_t handler; 672 int lsb; 673 int port; /* 0 if not port-specific, else port # */ 674 int dca; 675 } irq_table[] = { 676 { "", qib_7322intr, -1, 0, 0 }, 677 { " (buf avail)", qib_7322bufavail, 678 SYM_LSB(IntStatus, SendBufAvail), 0, 0}, 679 { " (sdma 0)", sdma_intr, 680 SYM_LSB(IntStatus, SDmaInt_0), 1, 1 }, 681 { " (sdma 1)", sdma_intr, 682 SYM_LSB(IntStatus, SDmaInt_1), 2, 1 }, 683 { " (sdmaI 0)", sdma_idle_intr, 684 SYM_LSB(IntStatus, SDmaIdleInt_0), 1, 1}, 685 { " (sdmaI 1)", sdma_idle_intr, 686 SYM_LSB(IntStatus, SDmaIdleInt_1), 2, 1}, 687 { " (sdmaP 0)", sdma_progress_intr, 688 SYM_LSB(IntStatus, SDmaProgressInt_0), 1, 1 }, 689 { " (sdmaP 1)", sdma_progress_intr, 690 SYM_LSB(IntStatus, SDmaProgressInt_1), 2, 1 }, 691 { " (sdmaC 0)", sdma_cleanup_intr, 692 SYM_LSB(IntStatus, SDmaCleanupDone_0), 1, 0 }, 693 { " (sdmaC 1)", sdma_cleanup_intr, 694 SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 , 0}, 695 }; 696 697 #ifdef CONFIG_INFINIBAND_QIB_DCA 698 699 static const struct dca_reg_map { 700 int shadow_inx; 701 int lsb; 702 u64 mask; 703 u16 regno; 704 } dca_rcvhdr_reg_map[] = { 705 { 0, SYM_LSB(DCACtrlB, RcvHdrq0DCAOPH), 706 ~SYM_MASK(DCACtrlB, RcvHdrq0DCAOPH) , KREG_IDX(DCACtrlB) }, 707 { 0, SYM_LSB(DCACtrlB, RcvHdrq1DCAOPH), 708 ~SYM_MASK(DCACtrlB, RcvHdrq1DCAOPH) , KREG_IDX(DCACtrlB) }, 709 { 0, SYM_LSB(DCACtrlB, RcvHdrq2DCAOPH), 710 ~SYM_MASK(DCACtrlB, RcvHdrq2DCAOPH) , KREG_IDX(DCACtrlB) }, 711 { 0, SYM_LSB(DCACtrlB, RcvHdrq3DCAOPH), 712 ~SYM_MASK(DCACtrlB, RcvHdrq3DCAOPH) , KREG_IDX(DCACtrlB) }, 713 { 1, SYM_LSB(DCACtrlC, RcvHdrq4DCAOPH), 714 ~SYM_MASK(DCACtrlC, RcvHdrq4DCAOPH) , KREG_IDX(DCACtrlC) }, 715 { 1, SYM_LSB(DCACtrlC, RcvHdrq5DCAOPH), 716 ~SYM_MASK(DCACtrlC, RcvHdrq5DCAOPH) , KREG_IDX(DCACtrlC) }, 717 { 1, SYM_LSB(DCACtrlC, RcvHdrq6DCAOPH), 718 ~SYM_MASK(DCACtrlC, RcvHdrq6DCAOPH) , KREG_IDX(DCACtrlC) }, 719 { 1, SYM_LSB(DCACtrlC, RcvHdrq7DCAOPH), 720 ~SYM_MASK(DCACtrlC, RcvHdrq7DCAOPH) , KREG_IDX(DCACtrlC) }, 721 { 2, SYM_LSB(DCACtrlD, RcvHdrq8DCAOPH), 722 ~SYM_MASK(DCACtrlD, RcvHdrq8DCAOPH) , KREG_IDX(DCACtrlD) }, 723 { 2, SYM_LSB(DCACtrlD, RcvHdrq9DCAOPH), 724 ~SYM_MASK(DCACtrlD, RcvHdrq9DCAOPH) , KREG_IDX(DCACtrlD) }, 725 { 2, SYM_LSB(DCACtrlD, RcvHdrq10DCAOPH), 726 ~SYM_MASK(DCACtrlD, RcvHdrq10DCAOPH) , KREG_IDX(DCACtrlD) }, 727 { 2, SYM_LSB(DCACtrlD, RcvHdrq11DCAOPH), 728 ~SYM_MASK(DCACtrlD, RcvHdrq11DCAOPH) , KREG_IDX(DCACtrlD) }, 729 { 3, SYM_LSB(DCACtrlE, RcvHdrq12DCAOPH), 730 ~SYM_MASK(DCACtrlE, RcvHdrq12DCAOPH) , KREG_IDX(DCACtrlE) }, 731 { 3, SYM_LSB(DCACtrlE, RcvHdrq13DCAOPH), 732 ~SYM_MASK(DCACtrlE, RcvHdrq13DCAOPH) , KREG_IDX(DCACtrlE) }, 733 { 3, SYM_LSB(DCACtrlE, RcvHdrq14DCAOPH), 734 ~SYM_MASK(DCACtrlE, RcvHdrq14DCAOPH) , KREG_IDX(DCACtrlE) }, 735 { 3, SYM_LSB(DCACtrlE, RcvHdrq15DCAOPH), 736 ~SYM_MASK(DCACtrlE, RcvHdrq15DCAOPH) , KREG_IDX(DCACtrlE) }, 737 { 4, SYM_LSB(DCACtrlF, RcvHdrq16DCAOPH), 738 ~SYM_MASK(DCACtrlF, RcvHdrq16DCAOPH) , KREG_IDX(DCACtrlF) }, 739 { 4, SYM_LSB(DCACtrlF, RcvHdrq17DCAOPH), 740 ~SYM_MASK(DCACtrlF, RcvHdrq17DCAOPH) , KREG_IDX(DCACtrlF) }, 741 }; 742 #endif 743 744 /* ibcctrl bits */ 745 #define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1 746 /* cycle through TS1/TS2 till OK */ 747 #define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2 748 /* wait for TS1, then go on */ 749 #define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3 750 #define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16 751 752 #define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ 753 #define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ 754 #define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ 755 756 #define BLOB_7322_IBCHG 0x101 757 758 static inline void qib_write_kreg(const struct qib_devdata *dd, 759 const u32 regno, u64 value); 760 static inline u32 qib_read_kreg32(const struct qib_devdata *, const u32); 761 static void write_7322_initregs(struct qib_devdata *); 762 static void write_7322_init_portregs(struct qib_pportdata *); 763 static void setup_7322_link_recovery(struct qib_pportdata *, u32); 764 static void check_7322_rxe_status(struct qib_pportdata *); 765 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *); 766 #ifdef CONFIG_INFINIBAND_QIB_DCA 767 static void qib_setup_dca(struct qib_devdata *dd); 768 static void setup_dca_notifier(struct qib_devdata *dd, int msixnum); 769 static void reset_dca_notifier(struct qib_devdata *dd, int msixnum); 770 #endif 771 772 /** 773 * qib_read_ureg32 - read 32-bit virtualized per-context register 774 * @dd: device 775 * @regno: register number 776 * @ctxt: context number 777 * 778 * Return the contents of a register that is virtualized to be per context. 779 * Returns -1 on errors (not distinguishable from valid contents at 780 * runtime; we may add a separate error variable at some point). 781 */ 782 static inline u32 qib_read_ureg32(const struct qib_devdata *dd, 783 enum qib_ureg regno, int ctxt) 784 { 785 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 786 return 0; 787 return readl(regno + (u64 __iomem *)( 788 (dd->ureg_align * ctxt) + (dd->userbase ? 789 (char __iomem *)dd->userbase : 790 (char __iomem *)dd->kregbase + dd->uregbase))); 791 } 792 793 /** 794 * qib_read_ureg - read virtualized per-context register 795 * @dd: device 796 * @regno: register number 797 * @ctxt: context number 798 * 799 * Return the contents of a register that is virtualized to be per context. 800 * Returns -1 on errors (not distinguishable from valid contents at 801 * runtime; we may add a separate error variable at some point). 802 */ 803 static inline u64 qib_read_ureg(const struct qib_devdata *dd, 804 enum qib_ureg regno, int ctxt) 805 { 806 807 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 808 return 0; 809 return readq(regno + (u64 __iomem *)( 810 (dd->ureg_align * ctxt) + (dd->userbase ? 811 (char __iomem *)dd->userbase : 812 (char __iomem *)dd->kregbase + dd->uregbase))); 813 } 814 815 /** 816 * qib_write_ureg - write virtualized per-context register 817 * @dd: device 818 * @regno: register number 819 * @value: value 820 * @ctxt: context 821 * 822 * Write the contents of a register that is virtualized to be per context. 823 */ 824 static inline void qib_write_ureg(const struct qib_devdata *dd, 825 enum qib_ureg regno, u64 value, int ctxt) 826 { 827 u64 __iomem *ubase; 828 829 if (dd->userbase) 830 ubase = (u64 __iomem *) 831 ((char __iomem *) dd->userbase + 832 dd->ureg_align * ctxt); 833 else 834 ubase = (u64 __iomem *) 835 (dd->uregbase + 836 (char __iomem *) dd->kregbase + 837 dd->ureg_align * ctxt); 838 839 if (dd->kregbase && (dd->flags & QIB_PRESENT)) 840 writeq(value, &ubase[regno]); 841 } 842 843 static inline u32 qib_read_kreg32(const struct qib_devdata *dd, 844 const u32 regno) 845 { 846 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 847 return -1; 848 return readl((u32 __iomem *) &dd->kregbase[regno]); 849 } 850 851 static inline u64 qib_read_kreg64(const struct qib_devdata *dd, 852 const u32 regno) 853 { 854 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 855 return -1; 856 return readq(&dd->kregbase[regno]); 857 } 858 859 static inline void qib_write_kreg(const struct qib_devdata *dd, 860 const u32 regno, u64 value) 861 { 862 if (dd->kregbase && (dd->flags & QIB_PRESENT)) 863 writeq(value, &dd->kregbase[regno]); 864 } 865 866 /* 867 * not many sanity checks for the port-specific kernel register routines, 868 * since they are only used when it's known to be safe. 869 */ 870 static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd, 871 const u16 regno) 872 { 873 if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT)) 874 return 0ULL; 875 return readq(&ppd->cpspec->kpregbase[regno]); 876 } 877 878 static inline void qib_write_kreg_port(const struct qib_pportdata *ppd, 879 const u16 regno, u64 value) 880 { 881 if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase && 882 (ppd->dd->flags & QIB_PRESENT)) 883 writeq(value, &ppd->cpspec->kpregbase[regno]); 884 } 885 886 /** 887 * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register 888 * @dd: the qlogic_ib device 889 * @regno: the register number to write 890 * @ctxt: the context containing the register 891 * @value: the value to write 892 */ 893 static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, 894 const u16 regno, unsigned ctxt, 895 u64 value) 896 { 897 qib_write_kreg(dd, regno + ctxt, value); 898 } 899 900 static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno) 901 { 902 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) 903 return 0; 904 return readq(&dd->cspec->cregbase[regno]); 905 906 907 } 908 909 static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno) 910 { 911 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) 912 return 0; 913 return readl(&dd->cspec->cregbase[regno]); 914 915 916 } 917 918 static inline void write_7322_creg_port(const struct qib_pportdata *ppd, 919 u16 regno, u64 value) 920 { 921 if (ppd->cpspec && ppd->cpspec->cpregbase && 922 (ppd->dd->flags & QIB_PRESENT)) 923 writeq(value, &ppd->cpspec->cpregbase[regno]); 924 } 925 926 static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd, 927 u16 regno) 928 { 929 if (!ppd->cpspec || !ppd->cpspec->cpregbase || 930 !(ppd->dd->flags & QIB_PRESENT)) 931 return 0; 932 return readq(&ppd->cpspec->cpregbase[regno]); 933 } 934 935 static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd, 936 u16 regno) 937 { 938 if (!ppd->cpspec || !ppd->cpspec->cpregbase || 939 !(ppd->dd->flags & QIB_PRESENT)) 940 return 0; 941 return readl(&ppd->cpspec->cpregbase[regno]); 942 } 943 944 /* bits in Control register */ 945 #define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset) 946 #define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn) 947 948 /* bits in general interrupt regs */ 949 #define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask) 950 #define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17) 951 #define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB) 952 #define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask) 953 #define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17) 954 #define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB) 955 #define QIB_I_C_ERROR INT_MASK(Err) 956 957 #define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1)) 958 #define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail) 959 #define QIB_I_GPIO INT_MASK(AssertGPIO) 960 #define QIB_I_P_SDMAINT(pidx) \ 961 (INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ 962 INT_MASK_P(SDmaProgress, pidx) | \ 963 INT_MASK_PM(SDmaCleanupDone, pidx)) 964 965 /* Interrupt bits that are "per port" */ 966 #define QIB_I_P_BITSEXTANT(pidx) \ 967 (INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \ 968 INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ 969 INT_MASK_P(SDmaProgress, pidx) | \ 970 INT_MASK_PM(SDmaCleanupDone, pidx)) 971 972 /* Interrupt bits that are common to a device */ 973 /* currently unused: QIB_I_SPIOSENT */ 974 #define QIB_I_C_BITSEXTANT \ 975 (QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \ 976 QIB_I_SPIOSENT | \ 977 QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO) 978 979 #define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \ 980 QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1)) 981 982 /* 983 * Error bits that are "per port". 984 */ 985 #define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged) 986 #define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr) 987 #define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr) 988 #define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr) 989 #define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr) 990 #define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr) 991 #define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr) 992 #define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr) 993 #define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr) 994 #define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr) 995 #define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr) 996 #define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr) 997 #define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr) 998 #define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr) 999 #define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr) 1000 #define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr) 1001 #define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr) 1002 #define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr) 1003 #define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr) 1004 #define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr) 1005 #define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr) 1006 #define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr) 1007 #define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr) 1008 #define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr) 1009 #define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr) 1010 #define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr) 1011 #define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr) 1012 #define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr) 1013 1014 #define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr) 1015 #define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr) 1016 #define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr) 1017 #define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr) 1018 #define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr) 1019 #define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr) 1020 #define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr) 1021 #define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr) 1022 #define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr) 1023 #define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr) 1024 #define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr) 1025 1026 /* Error bits that are common to a device */ 1027 #define QIB_E_RESET ERR_MASK(ResetNegated) 1028 #define QIB_E_HARDWARE ERR_MASK(HardwareErr) 1029 #define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr) 1030 1031 1032 /* 1033 * Per chip (rather than per-port) errors. Most either do 1034 * nothing but trigger a print (because they self-recover, or 1035 * always occur in tandem with other errors that handle the 1036 * issue), or because they indicate errors with no recovery, 1037 * but we want to know that they happened. 1038 */ 1039 #define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr) 1040 #define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd) 1041 #define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr) 1042 #define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr) 1043 #define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr) 1044 #define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr) 1045 #define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr) 1046 #define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr) 1047 1048 /* SDMA chip errors (not per port) 1049 * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get 1050 * the SDMAHALT error immediately, so we just print the dup error via the 1051 * E_AUTO mechanism. This is true of most of the per-port fatal errors 1052 * as well, but since this is port-independent, by definition, it's 1053 * handled a bit differently. SDMA_VL15 and SDMA_WRONG_PORT are per 1054 * packet send errors, and so are handled in the same manner as other 1055 * per-packet errors. 1056 */ 1057 #define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err) 1058 #define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr) 1059 #define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr) 1060 1061 /* 1062 * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS 1063 * it is used to print "common" packet errors. 1064 */ 1065 #define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\ 1066 QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\ 1067 QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\ 1068 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ 1069 QIB_E_P_REBP) 1070 1071 /* Error Bits that Packet-related (Receive, per-port) */ 1072 #define QIB_E_P_RPKTERRS (\ 1073 QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \ 1074 QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \ 1075 QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\ 1076 QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \ 1077 QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \ 1078 QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP) 1079 1080 /* 1081 * Error bits that are Send-related (per port) 1082 * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling). 1083 * All of these potentially need to have a buffer disarmed 1084 */ 1085 #define QIB_E_P_SPKTERRS (\ 1086 QIB_E_P_SUNEXP_PKTNUM |\ 1087 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ 1088 QIB_E_P_SMAXPKTLEN |\ 1089 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ 1090 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \ 1091 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL) 1092 1093 #define QIB_E_SPKTERRS ( \ 1094 QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \ 1095 ERR_MASK_N(SendUnsupportedVLErr) | \ 1096 QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT) 1097 1098 #define QIB_E_P_SDMAERRS ( \ 1099 QIB_E_P_SDMAHALT | \ 1100 QIB_E_P_SDMADESCADDRMISALIGN | \ 1101 QIB_E_P_SDMAUNEXPDATA | \ 1102 QIB_E_P_SDMAMISSINGDW | \ 1103 QIB_E_P_SDMADWEN | \ 1104 QIB_E_P_SDMARPYTAG | \ 1105 QIB_E_P_SDMA1STDESC | \ 1106 QIB_E_P_SDMABASE | \ 1107 QIB_E_P_SDMATAILOUTOFBOUND | \ 1108 QIB_E_P_SDMAOUTOFBOUND | \ 1109 QIB_E_P_SDMAGENMISMATCH) 1110 1111 /* 1112 * This sets some bits more than once, but makes it more obvious which 1113 * bits are not handled under other categories, and the repeat definition 1114 * is not a problem. 1115 */ 1116 #define QIB_E_P_BITSEXTANT ( \ 1117 QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \ 1118 QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \ 1119 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \ 1120 QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \ 1121 ) 1122 1123 /* 1124 * These are errors that can occur when the link 1125 * changes state while a packet is being sent or received. This doesn't 1126 * cover things like EBP or VCRC that can be the result of a sending 1127 * having the link change state, so we receive a "known bad" packet. 1128 * All of these are "per port", so renamed: 1129 */ 1130 #define QIB_E_P_LINK_PKTERRS (\ 1131 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ 1132 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\ 1133 QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\ 1134 QIB_E_P_RUNEXPCHAR) 1135 1136 /* 1137 * This sets some bits more than once, but makes it more obvious which 1138 * bits are not handled under other categories (such as QIB_E_SPKTERRS), 1139 * and the repeat definition is not a problem. 1140 */ 1141 #define QIB_E_C_BITSEXTANT (\ 1142 QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\ 1143 QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\ 1144 QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE) 1145 1146 /* Likewise Neuter E_SPKT_ERRS_IGNORE */ 1147 #define E_SPKT_ERRS_IGNORE 0 1148 1149 #define QIB_EXTS_MEMBIST_DISABLED \ 1150 SYM_MASK(EXTStatus, MemBISTDisabled) 1151 #define QIB_EXTS_MEMBIST_ENDTEST \ 1152 SYM_MASK(EXTStatus, MemBISTEndTest) 1153 1154 #define QIB_E_SPIOARMLAUNCH \ 1155 ERR_MASK(SendArmLaunchErr) 1156 1157 #define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd) 1158 #define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd) 1159 1160 /* 1161 * IBTA_1_2 is set when multiple speeds are enabled (normal), 1162 * and also if forced QDR (only QDR enabled). It's enabled for the 1163 * forced QDR case so that scrambling will be enabled by the TS3 1164 * exchange, when supported by both sides of the link. 1165 */ 1166 #define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE) 1167 #define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED) 1168 #define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR) 1169 #define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) 1170 #define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) 1171 #define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \ 1172 SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)) 1173 #define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR) 1174 1175 #define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod) 1176 #define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod) 1177 1178 #define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS) 1179 #define IBA7322_IBC_WIDTH_4X_ONLY (1<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) 1180 #define IBA7322_IBC_WIDTH_1X_ONLY (0<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) 1181 1182 #define IBA7322_IBC_RXPOL_MASK SYM_MASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP) 1183 #define IBA7322_IBC_RXPOL_LSB SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP) 1184 #define IBA7322_IBC_HRTBT_MASK (SYM_MASK(IBCCtrlB_0, HRTBT_AUTO) | \ 1185 SYM_MASK(IBCCtrlB_0, HRTBT_ENB)) 1186 #define IBA7322_IBC_HRTBT_RMASK (IBA7322_IBC_HRTBT_MASK >> \ 1187 SYM_LSB(IBCCtrlB_0, HRTBT_ENB)) 1188 #define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB) 1189 1190 #define IBA7322_REDIRECT_VEC_PER_REG 12 1191 1192 #define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En) 1193 #define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En) 1194 #define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En) 1195 #define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En) 1196 #define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En) 1197 1198 #define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */ 1199 1200 #define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \ 1201 .msg = #fldname , .sz = sizeof(#fldname) } 1202 #define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \ 1203 fldname##Mask##_##port), .msg = #fldname , .sz = sizeof(#fldname) } 1204 static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = { 1205 HWE_AUTO_P(IBSerdesPClkNotDetect, 1), 1206 HWE_AUTO_P(IBSerdesPClkNotDetect, 0), 1207 HWE_AUTO(PCIESerdesPClkNotDetect), 1208 HWE_AUTO(PowerOnBISTFailed), 1209 HWE_AUTO(TempsenseTholdReached), 1210 HWE_AUTO(MemoryErr), 1211 HWE_AUTO(PCIeBusParityErr), 1212 HWE_AUTO(PcieCplTimeout), 1213 HWE_AUTO(PciePoisonedTLP), 1214 HWE_AUTO_P(SDmaMemReadErr, 1), 1215 HWE_AUTO_P(SDmaMemReadErr, 0), 1216 HWE_AUTO_P(IBCBusFromSPCParityErr, 1), 1217 HWE_AUTO_P(IBCBusToSPCParityErr, 1), 1218 HWE_AUTO_P(IBCBusFromSPCParityErr, 0), 1219 HWE_AUTO(statusValidNoEop), 1220 HWE_AUTO(LATriggered), 1221 { .mask = 0, .sz = 0 } 1222 }; 1223 1224 #define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \ 1225 .msg = #fldname, .sz = sizeof(#fldname) } 1226 #define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \ 1227 .msg = #fldname, .sz = sizeof(#fldname) } 1228 static const struct qib_hwerror_msgs qib_7322error_msgs[] = { 1229 E_AUTO(RcvEgrFullErr), 1230 E_AUTO(RcvHdrFullErr), 1231 E_AUTO(ResetNegated), 1232 E_AUTO(HardwareErr), 1233 E_AUTO(InvalidAddrErr), 1234 E_AUTO(SDmaVL15Err), 1235 E_AUTO(SBufVL15MisUseErr), 1236 E_AUTO(InvalidEEPCmd), 1237 E_AUTO(RcvContextShareErr), 1238 E_AUTO(SendVLMismatchErr), 1239 E_AUTO(SendArmLaunchErr), 1240 E_AUTO(SendSpecialTriggerErr), 1241 E_AUTO(SDmaWrongPortErr), 1242 E_AUTO(SDmaBufMaskDuplicateErr), 1243 { .mask = 0, .sz = 0 } 1244 }; 1245 1246 static const struct qib_hwerror_msgs qib_7322p_error_msgs[] = { 1247 E_P_AUTO(IBStatusChanged), 1248 E_P_AUTO(SHeadersErr), 1249 E_P_AUTO(VL15BufMisuseErr), 1250 /* 1251 * SDmaHaltErr is not really an error, make it clearer; 1252 */ 1253 {.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted", 1254 .sz = 11}, 1255 E_P_AUTO(SDmaDescAddrMisalignErr), 1256 E_P_AUTO(SDmaUnexpDataErr), 1257 E_P_AUTO(SDmaMissingDwErr), 1258 E_P_AUTO(SDmaDwEnErr), 1259 E_P_AUTO(SDmaRpyTagErr), 1260 E_P_AUTO(SDma1stDescErr), 1261 E_P_AUTO(SDmaBaseErr), 1262 E_P_AUTO(SDmaTailOutOfBoundErr), 1263 E_P_AUTO(SDmaOutOfBoundErr), 1264 E_P_AUTO(SDmaGenMismatchErr), 1265 E_P_AUTO(SendBufMisuseErr), 1266 E_P_AUTO(SendUnsupportedVLErr), 1267 E_P_AUTO(SendUnexpectedPktNumErr), 1268 E_P_AUTO(SendDroppedDataPktErr), 1269 E_P_AUTO(SendDroppedSmpPktErr), 1270 E_P_AUTO(SendPktLenErr), 1271 E_P_AUTO(SendUnderRunErr), 1272 E_P_AUTO(SendMaxPktLenErr), 1273 E_P_AUTO(SendMinPktLenErr), 1274 E_P_AUTO(RcvIBLostLinkErr), 1275 E_P_AUTO(RcvHdrErr), 1276 E_P_AUTO(RcvHdrLenErr), 1277 E_P_AUTO(RcvBadTidErr), 1278 E_P_AUTO(RcvBadVersionErr), 1279 E_P_AUTO(RcvIBFlowErr), 1280 E_P_AUTO(RcvEBPErr), 1281 E_P_AUTO(RcvUnsupportedVLErr), 1282 E_P_AUTO(RcvUnexpectedCharErr), 1283 E_P_AUTO(RcvShortPktLenErr), 1284 E_P_AUTO(RcvLongPktLenErr), 1285 E_P_AUTO(RcvMaxPktLenErr), 1286 E_P_AUTO(RcvMinPktLenErr), 1287 E_P_AUTO(RcvICRCErr), 1288 E_P_AUTO(RcvVCRCErr), 1289 E_P_AUTO(RcvFormatErr), 1290 { .mask = 0, .sz = 0 } 1291 }; 1292 1293 /* 1294 * Below generates "auto-message" for interrupts not specific to any port or 1295 * context 1296 */ 1297 #define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \ 1298 .msg = #fldname, .sz = sizeof(#fldname) } 1299 /* Below generates "auto-message" for interrupts specific to a port */ 1300 #define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\ 1301 SYM_LSB(IntMask, fldname##Mask##_0), \ 1302 SYM_LSB(IntMask, fldname##Mask##_1)), \ 1303 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } 1304 /* For some reason, the SerDesTrimDone bits are reversed */ 1305 #define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\ 1306 SYM_LSB(IntMask, fldname##Mask##_1), \ 1307 SYM_LSB(IntMask, fldname##Mask##_0)), \ 1308 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } 1309 /* 1310 * Below generates "auto-message" for interrupts specific to a context, 1311 * with ctxt-number appended 1312 */ 1313 #define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\ 1314 SYM_LSB(IntMask, fldname##0IntMask), \ 1315 SYM_LSB(IntMask, fldname##17IntMask)), \ 1316 .msg = #fldname "_C", .sz = sizeof(#fldname "_C") } 1317 1318 #define TXSYMPTOM_AUTO_P(fldname) \ 1319 { .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), \ 1320 .msg = #fldname, .sz = sizeof(#fldname) } 1321 static const struct qib_hwerror_msgs hdrchk_msgs[] = { 1322 TXSYMPTOM_AUTO_P(NonKeyPacket), 1323 TXSYMPTOM_AUTO_P(GRHFail), 1324 TXSYMPTOM_AUTO_P(PkeyFail), 1325 TXSYMPTOM_AUTO_P(QPFail), 1326 TXSYMPTOM_AUTO_P(SLIDFail), 1327 TXSYMPTOM_AUTO_P(RawIPV6), 1328 TXSYMPTOM_AUTO_P(PacketTooSmall), 1329 { .mask = 0, .sz = 0 } 1330 }; 1331 1332 #define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */ 1333 1334 /* 1335 * Called when we might have an error that is specific to a particular 1336 * PIO buffer, and may need to cancel that buffer, so it can be re-used, 1337 * because we don't need to force the update of pioavail 1338 */ 1339 static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd) 1340 { 1341 struct qib_devdata *dd = ppd->dd; 1342 u32 i; 1343 int any; 1344 u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 1345 u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG; 1346 unsigned long sbuf[4]; 1347 1348 /* 1349 * It's possible that sendbuffererror could have bits set; might 1350 * have already done this as a result of hardware error handling. 1351 */ 1352 any = 0; 1353 for (i = 0; i < regcnt; ++i) { 1354 sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i); 1355 if (sbuf[i]) { 1356 any = 1; 1357 qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]); 1358 } 1359 } 1360 1361 if (any) 1362 qib_disarm_piobufs_set(dd, sbuf, piobcnt); 1363 } 1364 1365 /* No txe_recover yet, if ever */ 1366 1367 /* No decode__errors yet */ 1368 static void err_decode(char *msg, size_t len, u64 errs, 1369 const struct qib_hwerror_msgs *msp) 1370 { 1371 u64 these, lmask; 1372 int took, multi, n = 0; 1373 1374 while (errs && msp && msp->mask) { 1375 multi = (msp->mask & (msp->mask - 1)); 1376 while (errs & msp->mask) { 1377 these = (errs & msp->mask); 1378 lmask = (these & (these - 1)) ^ these; 1379 if (len) { 1380 if (n++) { 1381 /* separate the strings */ 1382 *msg++ = ','; 1383 len--; 1384 } 1385 BUG_ON(!msp->sz); 1386 /* msp->sz counts the nul */ 1387 took = min_t(size_t, msp->sz - (size_t)1, len); 1388 memcpy(msg, msp->msg, took); 1389 len -= took; 1390 msg += took; 1391 if (len) 1392 *msg = '\0'; 1393 } 1394 errs &= ~lmask; 1395 if (len && multi) { 1396 /* More than one bit this mask */ 1397 int idx = -1; 1398 1399 while (lmask & msp->mask) { 1400 ++idx; 1401 lmask >>= 1; 1402 } 1403 took = scnprintf(msg, len, "_%d", idx); 1404 len -= took; 1405 msg += took; 1406 } 1407 } 1408 ++msp; 1409 } 1410 /* If some bits are left, show in hex. */ 1411 if (len && errs) 1412 snprintf(msg, len, "%sMORE:%llX", n ? "," : "", 1413 (unsigned long long) errs); 1414 } 1415 1416 /* only called if r1 set */ 1417 static void flush_fifo(struct qib_pportdata *ppd) 1418 { 1419 struct qib_devdata *dd = ppd->dd; 1420 u32 __iomem *piobuf; 1421 u32 bufn; 1422 u32 *hdr; 1423 u64 pbc; 1424 const unsigned hdrwords = 7; 1425 static struct ib_header ibhdr = { 1426 .lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH), 1427 .lrh[1] = IB_LID_PERMISSIVE, 1428 .lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC), 1429 .lrh[3] = IB_LID_PERMISSIVE, 1430 .u.oth.bth[0] = cpu_to_be32( 1431 (IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY), 1432 .u.oth.bth[1] = cpu_to_be32(0), 1433 .u.oth.bth[2] = cpu_to_be32(0), 1434 .u.oth.u.ud.deth[0] = cpu_to_be32(0), 1435 .u.oth.u.ud.deth[1] = cpu_to_be32(0), 1436 }; 1437 1438 /* 1439 * Send a dummy VL15 packet to flush the launch FIFO. 1440 * This will not actually be sent since the TxeBypassIbc bit is set. 1441 */ 1442 pbc = PBC_7322_VL15_SEND | 1443 (((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) | 1444 (hdrwords + SIZE_OF_CRC); 1445 piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn); 1446 if (!piobuf) 1447 return; 1448 writeq(pbc, piobuf); 1449 hdr = (u32 *) &ibhdr; 1450 if (dd->flags & QIB_PIO_FLUSH_WC) { 1451 qib_flush_wc(); 1452 qib_pio_copy(piobuf + 2, hdr, hdrwords - 1); 1453 qib_flush_wc(); 1454 __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1); 1455 qib_flush_wc(); 1456 } else 1457 qib_pio_copy(piobuf + 2, hdr, hdrwords); 1458 qib_sendbuf_done(dd, bufn); 1459 } 1460 1461 /* 1462 * This is called with interrupts disabled and sdma_lock held. 1463 */ 1464 static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) 1465 { 1466 struct qib_devdata *dd = ppd->dd; 1467 u64 set_sendctrl = 0; 1468 u64 clr_sendctrl = 0; 1469 1470 if (op & QIB_SDMA_SENDCTRL_OP_ENABLE) 1471 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); 1472 else 1473 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); 1474 1475 if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE) 1476 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); 1477 else 1478 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); 1479 1480 if (op & QIB_SDMA_SENDCTRL_OP_HALT) 1481 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); 1482 else 1483 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); 1484 1485 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) 1486 set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | 1487 SYM_MASK(SendCtrl_0, TxeAbortIbc) | 1488 SYM_MASK(SendCtrl_0, TxeDrainRmFifo); 1489 else 1490 clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | 1491 SYM_MASK(SendCtrl_0, TxeAbortIbc) | 1492 SYM_MASK(SendCtrl_0, TxeDrainRmFifo); 1493 1494 spin_lock(&dd->sendctrl_lock); 1495 1496 /* If we are draining everything, block sends first */ 1497 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { 1498 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); 1499 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1500 qib_write_kreg(dd, kr_scratch, 0); 1501 } 1502 1503 ppd->p_sendctrl |= set_sendctrl; 1504 ppd->p_sendctrl &= ~clr_sendctrl; 1505 1506 if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP) 1507 qib_write_kreg_port(ppd, krp_sendctrl, 1508 ppd->p_sendctrl | 1509 SYM_MASK(SendCtrl_0, SDmaCleanup)); 1510 else 1511 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1512 qib_write_kreg(dd, kr_scratch, 0); 1513 1514 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { 1515 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); 1516 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1517 qib_write_kreg(dd, kr_scratch, 0); 1518 } 1519 1520 spin_unlock(&dd->sendctrl_lock); 1521 1522 if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1) 1523 flush_fifo(ppd); 1524 } 1525 1526 static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd) 1527 { 1528 __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned); 1529 } 1530 1531 static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd) 1532 { 1533 /* 1534 * Set SendDmaLenGen and clear and set 1535 * the MSB of the generation count to enable generation checking 1536 * and load the internal generation counter. 1537 */ 1538 qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt); 1539 qib_write_kreg_port(ppd, krp_senddmalengen, 1540 ppd->sdma_descq_cnt | 1541 (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB)); 1542 } 1543 1544 /* 1545 * Must be called with sdma_lock held, or before init finished. 1546 */ 1547 static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail) 1548 { 1549 /* Commit writes to memory and advance the tail on the chip */ 1550 wmb(); 1551 ppd->sdma_descq_tail = tail; 1552 qib_write_kreg_port(ppd, krp_senddmatail, tail); 1553 } 1554 1555 /* 1556 * This is called with interrupts disabled and sdma_lock held. 1557 */ 1558 static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd) 1559 { 1560 /* 1561 * Drain all FIFOs. 1562 * The hardware doesn't require this but we do it so that verbs 1563 * and user applications don't wait for link active to send stale 1564 * data. 1565 */ 1566 sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH); 1567 1568 qib_sdma_7322_setlengen(ppd); 1569 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ 1570 ppd->sdma_head_dma[0] = 0; 1571 qib_7322_sdma_sendctrl(ppd, 1572 ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP); 1573 } 1574 1575 #define DISABLES_SDMA ( \ 1576 QIB_E_P_SDMAHALT | \ 1577 QIB_E_P_SDMADESCADDRMISALIGN | \ 1578 QIB_E_P_SDMAMISSINGDW | \ 1579 QIB_E_P_SDMADWEN | \ 1580 QIB_E_P_SDMARPYTAG | \ 1581 QIB_E_P_SDMA1STDESC | \ 1582 QIB_E_P_SDMABASE | \ 1583 QIB_E_P_SDMATAILOUTOFBOUND | \ 1584 QIB_E_P_SDMAOUTOFBOUND | \ 1585 QIB_E_P_SDMAGENMISMATCH) 1586 1587 static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs) 1588 { 1589 unsigned long flags; 1590 struct qib_devdata *dd = ppd->dd; 1591 1592 errs &= QIB_E_P_SDMAERRS; 1593 err_decode(ppd->cpspec->sdmamsgbuf, sizeof(ppd->cpspec->sdmamsgbuf), 1594 errs, qib_7322p_error_msgs); 1595 1596 if (errs & QIB_E_P_SDMAUNEXPDATA) 1597 qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit, 1598 ppd->port); 1599 1600 spin_lock_irqsave(&ppd->sdma_lock, flags); 1601 1602 if (errs != QIB_E_P_SDMAHALT) { 1603 /* SDMA errors have QIB_E_P_SDMAHALT and another bit set */ 1604 qib_dev_porterr(dd, ppd->port, 1605 "SDMA %s 0x%016llx %s\n", 1606 qib_sdma_state_names[ppd->sdma_state.current_state], 1607 errs, ppd->cpspec->sdmamsgbuf); 1608 dump_sdma_7322_state(ppd); 1609 } 1610 1611 switch (ppd->sdma_state.current_state) { 1612 case qib_sdma_state_s00_hw_down: 1613 break; 1614 1615 case qib_sdma_state_s10_hw_start_up_wait: 1616 if (errs & QIB_E_P_SDMAHALT) 1617 __qib_sdma_process_event(ppd, 1618 qib_sdma_event_e20_hw_started); 1619 break; 1620 1621 case qib_sdma_state_s20_idle: 1622 break; 1623 1624 case qib_sdma_state_s30_sw_clean_up_wait: 1625 break; 1626 1627 case qib_sdma_state_s40_hw_clean_up_wait: 1628 if (errs & QIB_E_P_SDMAHALT) 1629 __qib_sdma_process_event(ppd, 1630 qib_sdma_event_e50_hw_cleaned); 1631 break; 1632 1633 case qib_sdma_state_s50_hw_halt_wait: 1634 if (errs & QIB_E_P_SDMAHALT) 1635 __qib_sdma_process_event(ppd, 1636 qib_sdma_event_e60_hw_halted); 1637 break; 1638 1639 case qib_sdma_state_s99_running: 1640 __qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted); 1641 __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted); 1642 break; 1643 } 1644 1645 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 1646 } 1647 1648 /* 1649 * handle per-device errors (not per-port errors) 1650 */ 1651 static noinline void handle_7322_errors(struct qib_devdata *dd) 1652 { 1653 char *msg; 1654 u64 iserr = 0; 1655 u64 errs; 1656 u64 mask; 1657 1658 qib_stats.sps_errints++; 1659 errs = qib_read_kreg64(dd, kr_errstatus); 1660 if (!errs) { 1661 qib_devinfo(dd->pcidev, 1662 "device error interrupt, but no error bits set!\n"); 1663 goto done; 1664 } 1665 1666 /* don't report errors that are masked */ 1667 errs &= dd->cspec->errormask; 1668 msg = dd->cspec->emsgbuf; 1669 1670 /* do these first, they are most important */ 1671 if (errs & QIB_E_HARDWARE) { 1672 *msg = '\0'; 1673 qib_7322_handle_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf)); 1674 } 1675 1676 if (errs & QIB_E_SPKTERRS) { 1677 qib_disarm_7322_senderrbufs(dd->pport); 1678 qib_stats.sps_txerrs++; 1679 } else if (errs & QIB_E_INVALIDADDR) 1680 qib_stats.sps_txerrs++; 1681 else if (errs & QIB_E_ARMLAUNCH) { 1682 qib_stats.sps_txerrs++; 1683 qib_disarm_7322_senderrbufs(dd->pport); 1684 } 1685 qib_write_kreg(dd, kr_errclear, errs); 1686 1687 /* 1688 * The ones we mask off are handled specially below 1689 * or above. Also mask SDMADISABLED by default as it 1690 * is too chatty. 1691 */ 1692 mask = QIB_E_HARDWARE; 1693 *msg = '\0'; 1694 1695 err_decode(msg, sizeof(dd->cspec->emsgbuf), errs & ~mask, 1696 qib_7322error_msgs); 1697 1698 /* 1699 * Getting reset is a tragedy for all ports. Mark the device 1700 * _and_ the ports as "offline" in way meaningful to each. 1701 */ 1702 if (errs & QIB_E_RESET) { 1703 int pidx; 1704 1705 qib_dev_err(dd, 1706 "Got reset, requires re-init (unload and reload driver)\n"); 1707 dd->flags &= ~QIB_INITTED; /* needs re-init */ 1708 /* mark as having had error */ 1709 *dd->devstatusp |= QIB_STATUS_HWERROR; 1710 for (pidx = 0; pidx < dd->num_pports; ++pidx) 1711 if (dd->pport[pidx].link_speed_supported) 1712 *dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF; 1713 } 1714 1715 if (*msg && iserr) 1716 qib_dev_err(dd, "%s error\n", msg); 1717 1718 /* 1719 * If there were hdrq or egrfull errors, wake up any processes 1720 * waiting in poll. We used to try to check which contexts had 1721 * the overflow, but given the cost of that and the chip reads 1722 * to support it, it's better to just wake everybody up if we 1723 * get an overflow; waiters can poll again if it's not them. 1724 */ 1725 if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { 1726 qib_handle_urcv(dd, ~0U); 1727 if (errs & ERR_MASK(RcvEgrFullErr)) 1728 qib_stats.sps_buffull++; 1729 else 1730 qib_stats.sps_hdrfull++; 1731 } 1732 1733 done: 1734 return; 1735 } 1736 1737 static void qib_error_tasklet(unsigned long data) 1738 { 1739 struct qib_devdata *dd = (struct qib_devdata *)data; 1740 1741 handle_7322_errors(dd); 1742 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 1743 } 1744 1745 static void reenable_chase(struct timer_list *t) 1746 { 1747 struct qib_chippport_specific *cp = from_timer(cp, t, chase_timer); 1748 struct qib_pportdata *ppd = cp->ppd; 1749 1750 ppd->cpspec->chase_timer.expires = 0; 1751 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, 1752 QLOGIC_IB_IBCC_LINKINITCMD_POLL); 1753 } 1754 1755 static void disable_chase(struct qib_pportdata *ppd, unsigned long tnow, 1756 u8 ibclt) 1757 { 1758 ppd->cpspec->chase_end = 0; 1759 1760 if (!qib_chase) 1761 return; 1762 1763 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, 1764 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 1765 ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME; 1766 add_timer(&ppd->cpspec->chase_timer); 1767 } 1768 1769 static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) 1770 { 1771 u8 ibclt; 1772 unsigned long tnow; 1773 1774 ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState); 1775 1776 /* 1777 * Detect and handle the state chase issue, where we can 1778 * get stuck if we are unlucky on timing on both sides of 1779 * the link. If we are, we disable, set a timer, and 1780 * then re-enable. 1781 */ 1782 switch (ibclt) { 1783 case IB_7322_LT_STATE_CFGRCVFCFG: 1784 case IB_7322_LT_STATE_CFGWAITRMT: 1785 case IB_7322_LT_STATE_TXREVLANES: 1786 case IB_7322_LT_STATE_CFGENH: 1787 tnow = jiffies; 1788 if (ppd->cpspec->chase_end && 1789 time_after(tnow, ppd->cpspec->chase_end)) 1790 disable_chase(ppd, tnow, ibclt); 1791 else if (!ppd->cpspec->chase_end) 1792 ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME; 1793 break; 1794 default: 1795 ppd->cpspec->chase_end = 0; 1796 break; 1797 } 1798 1799 if (((ibclt >= IB_7322_LT_STATE_CFGTEST && 1800 ibclt <= IB_7322_LT_STATE_CFGWAITENH) || 1801 ibclt == IB_7322_LT_STATE_LINKUP) && 1802 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { 1803 force_h1(ppd); 1804 ppd->cpspec->qdr_reforce = 1; 1805 if (!ppd->dd->cspec->r1) 1806 serdes_7322_los_enable(ppd, 0); 1807 } else if (ppd->cpspec->qdr_reforce && 1808 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) && 1809 (ibclt == IB_7322_LT_STATE_CFGENH || 1810 ibclt == IB_7322_LT_STATE_CFGIDLE || 1811 ibclt == IB_7322_LT_STATE_LINKUP)) 1812 force_h1(ppd); 1813 1814 if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) && 1815 ppd->link_speed_enabled == QIB_IB_QDR && 1816 (ibclt == IB_7322_LT_STATE_CFGTEST || 1817 ibclt == IB_7322_LT_STATE_CFGENH || 1818 (ibclt >= IB_7322_LT_STATE_POLLACTIVE && 1819 ibclt <= IB_7322_LT_STATE_SLEEPQUIET))) 1820 adj_tx_serdes(ppd); 1821 1822 if (ibclt != IB_7322_LT_STATE_LINKUP) { 1823 u8 ltstate = qib_7322_phys_portstate(ibcst); 1824 u8 pibclt = (u8)SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, 1825 LinkTrainingState); 1826 if (!ppd->dd->cspec->r1 && 1827 pibclt == IB_7322_LT_STATE_LINKUP && 1828 ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && 1829 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && 1830 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && 1831 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) 1832 /* If the link went down (but no into recovery, 1833 * turn LOS back on */ 1834 serdes_7322_los_enable(ppd, 1); 1835 if (!ppd->cpspec->qdr_dfe_on && 1836 ibclt <= IB_7322_LT_STATE_SLEEPQUIET) { 1837 ppd->cpspec->qdr_dfe_on = 1; 1838 ppd->cpspec->qdr_dfe_time = 0; 1839 /* On link down, reenable QDR adaptation */ 1840 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 1841 ppd->dd->cspec->r1 ? 1842 QDR_STATIC_ADAPT_DOWN_R1 : 1843 QDR_STATIC_ADAPT_DOWN); 1844 pr_info( 1845 "IB%u:%u re-enabled QDR adaptation ibclt %x\n", 1846 ppd->dd->unit, ppd->port, ibclt); 1847 } 1848 } 1849 } 1850 1851 static int qib_7322_set_ib_cfg(struct qib_pportdata *, int, u32); 1852 1853 /* 1854 * This is per-pport error handling. 1855 * will likely get it's own MSIx interrupt (one for each port, 1856 * although just a single handler). 1857 */ 1858 static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) 1859 { 1860 char *msg; 1861 u64 ignore_this_time = 0, iserr = 0, errs, fmask; 1862 struct qib_devdata *dd = ppd->dd; 1863 1864 /* do this as soon as possible */ 1865 fmask = qib_read_kreg64(dd, kr_act_fmask); 1866 if (!fmask) 1867 check_7322_rxe_status(ppd); 1868 1869 errs = qib_read_kreg_port(ppd, krp_errstatus); 1870 if (!errs) 1871 qib_devinfo(dd->pcidev, 1872 "Port%d error interrupt, but no error bits set!\n", 1873 ppd->port); 1874 if (!fmask) 1875 errs &= ~QIB_E_P_IBSTATUSCHANGED; 1876 if (!errs) 1877 goto done; 1878 1879 msg = ppd->cpspec->epmsgbuf; 1880 *msg = '\0'; 1881 1882 if (errs & ~QIB_E_P_BITSEXTANT) { 1883 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), 1884 errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs); 1885 if (!*msg) 1886 snprintf(msg, sizeof(ppd->cpspec->epmsgbuf), 1887 "no others"); 1888 qib_dev_porterr(dd, ppd->port, 1889 "error interrupt with unknown errors 0x%016Lx set (and %s)\n", 1890 (errs & ~QIB_E_P_BITSEXTANT), msg); 1891 *msg = '\0'; 1892 } 1893 1894 if (errs & QIB_E_P_SHDR) { 1895 u64 symptom; 1896 1897 /* determine cause, then write to clear */ 1898 symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom); 1899 qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0); 1900 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), symptom, 1901 hdrchk_msgs); 1902 *msg = '\0'; 1903 /* senderrbuf cleared in SPKTERRS below */ 1904 } 1905 1906 if (errs & QIB_E_P_SPKTERRS) { 1907 if ((errs & QIB_E_P_LINK_PKTERRS) && 1908 !(ppd->lflags & QIBL_LINKACTIVE)) { 1909 /* 1910 * This can happen when trying to bring the link 1911 * up, but the IB link changes state at the "wrong" 1912 * time. The IB logic then complains that the packet 1913 * isn't valid. We don't want to confuse people, so 1914 * we just don't print them, except at debug 1915 */ 1916 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), 1917 (errs & QIB_E_P_LINK_PKTERRS), 1918 qib_7322p_error_msgs); 1919 *msg = '\0'; 1920 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; 1921 } 1922 qib_disarm_7322_senderrbufs(ppd); 1923 } else if ((errs & QIB_E_P_LINK_PKTERRS) && 1924 !(ppd->lflags & QIBL_LINKACTIVE)) { 1925 /* 1926 * This can happen when SMA is trying to bring the link 1927 * up, but the IB link changes state at the "wrong" time. 1928 * The IB logic then complains that the packet isn't 1929 * valid. We don't want to confuse people, so we just 1930 * don't print them, except at debug 1931 */ 1932 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), errs, 1933 qib_7322p_error_msgs); 1934 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; 1935 *msg = '\0'; 1936 } 1937 1938 qib_write_kreg_port(ppd, krp_errclear, errs); 1939 1940 errs &= ~ignore_this_time; 1941 if (!errs) 1942 goto done; 1943 1944 if (errs & QIB_E_P_RPKTERRS) 1945 qib_stats.sps_rcverrs++; 1946 if (errs & QIB_E_P_SPKTERRS) 1947 qib_stats.sps_txerrs++; 1948 1949 iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS); 1950 1951 if (errs & QIB_E_P_SDMAERRS) 1952 sdma_7322_p_errors(ppd, errs); 1953 1954 if (errs & QIB_E_P_IBSTATUSCHANGED) { 1955 u64 ibcs; 1956 u8 ltstate; 1957 1958 ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a); 1959 ltstate = qib_7322_phys_portstate(ibcs); 1960 1961 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) 1962 handle_serdes_issues(ppd, ibcs); 1963 if (!(ppd->cpspec->ibcctrl_a & 1964 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) { 1965 /* 1966 * We got our interrupt, so init code should be 1967 * happy and not try alternatives. Now squelch 1968 * other "chatter" from link-negotiation (pre Init) 1969 */ 1970 ppd->cpspec->ibcctrl_a |= 1971 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 1972 qib_write_kreg_port(ppd, krp_ibcctrl_a, 1973 ppd->cpspec->ibcctrl_a); 1974 } 1975 1976 /* Update our picture of width and speed from chip */ 1977 ppd->link_width_active = 1978 (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ? 1979 IB_WIDTH_4X : IB_WIDTH_1X; 1980 ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0, 1981 LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs & 1982 SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ? 1983 QIB_IB_DDR : QIB_IB_SDR; 1984 1985 if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate != 1986 IB_PHYSPORTSTATE_DISABLED) 1987 qib_set_ib_7322_lstate(ppd, 0, 1988 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 1989 else 1990 /* 1991 * Since going into a recovery state causes the link 1992 * state to go down and since recovery is transitory, 1993 * it is better if we "miss" ever seeing the link 1994 * training state go into recovery (i.e., ignore this 1995 * transition for link state special handling purposes) 1996 * without updating lastibcstat. 1997 */ 1998 if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && 1999 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && 2000 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && 2001 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) 2002 qib_handle_e_ibstatuschanged(ppd, ibcs); 2003 } 2004 if (*msg && iserr) 2005 qib_dev_porterr(dd, ppd->port, "%s error\n", msg); 2006 2007 if (ppd->state_wanted & ppd->lflags) 2008 wake_up_interruptible(&ppd->state_wait); 2009 done: 2010 return; 2011 } 2012 2013 /* enable/disable chip from delivering interrupts */ 2014 static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable) 2015 { 2016 if (enable) { 2017 if (dd->flags & QIB_BADINTR) 2018 return; 2019 qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask); 2020 /* cause any pending enabled interrupts to be re-delivered */ 2021 qib_write_kreg(dd, kr_intclear, 0ULL); 2022 if (dd->cspec->num_msix_entries) { 2023 /* and same for MSIx */ 2024 u64 val = qib_read_kreg64(dd, kr_intgranted); 2025 2026 if (val) 2027 qib_write_kreg(dd, kr_intgranted, val); 2028 } 2029 } else 2030 qib_write_kreg(dd, kr_intmask, 0ULL); 2031 } 2032 2033 /* 2034 * Try to cleanup as much as possible for anything that might have gone 2035 * wrong while in freeze mode, such as pio buffers being written by user 2036 * processes (causing armlaunch), send errors due to going into freeze mode, 2037 * etc., and try to avoid causing extra interrupts while doing so. 2038 * Forcibly update the in-memory pioavail register copies after cleanup 2039 * because the chip won't do it while in freeze mode (the register values 2040 * themselves are kept correct). 2041 * Make sure that we don't lose any important interrupts by using the chip 2042 * feature that says that writing 0 to a bit in *clear that is set in 2043 * *status will cause an interrupt to be generated again (if allowed by 2044 * the *mask value). 2045 * This is in chip-specific code because of all of the register accesses, 2046 * even though the details are similar on most chips. 2047 */ 2048 static void qib_7322_clear_freeze(struct qib_devdata *dd) 2049 { 2050 int pidx; 2051 2052 /* disable error interrupts, to avoid confusion */ 2053 qib_write_kreg(dd, kr_errmask, 0ULL); 2054 2055 for (pidx = 0; pidx < dd->num_pports; ++pidx) 2056 if (dd->pport[pidx].link_speed_supported) 2057 qib_write_kreg_port(dd->pport + pidx, krp_errmask, 2058 0ULL); 2059 2060 /* also disable interrupts; errormask is sometimes overwritten */ 2061 qib_7322_set_intr_state(dd, 0); 2062 2063 /* clear the freeze, and be sure chip saw it */ 2064 qib_write_kreg(dd, kr_control, dd->control); 2065 qib_read_kreg32(dd, kr_scratch); 2066 2067 /* 2068 * Force new interrupt if any hwerr, error or interrupt bits are 2069 * still set, and clear "safe" send packet errors related to freeze 2070 * and cancelling sends. Re-enable error interrupts before possible 2071 * force of re-interrupt on pending interrupts. 2072 */ 2073 qib_write_kreg(dd, kr_hwerrclear, 0ULL); 2074 qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); 2075 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 2076 /* We need to purge per-port errs and reset mask, too */ 2077 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 2078 if (!dd->pport[pidx].link_speed_supported) 2079 continue; 2080 qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull); 2081 qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull); 2082 } 2083 qib_7322_set_intr_state(dd, 1); 2084 } 2085 2086 /* no error handling to speak of */ 2087 /** 2088 * qib_7322_handle_hwerrors - display hardware errors. 2089 * @dd: the qlogic_ib device 2090 * @msg: the output buffer 2091 * @msgl: the size of the output buffer 2092 * 2093 * Use same msg buffer as regular errors to avoid excessive stack 2094 * use. Most hardware errors are catastrophic, but for right now, 2095 * we'll print them and continue. We reuse the same message buffer as 2096 * qib_handle_errors() to avoid excessive stack usage. 2097 */ 2098 static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg, 2099 size_t msgl) 2100 { 2101 u64 hwerrs; 2102 u32 ctrl; 2103 int isfatal = 0; 2104 2105 hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); 2106 if (!hwerrs) 2107 goto bail; 2108 if (hwerrs == ~0ULL) { 2109 qib_dev_err(dd, 2110 "Read of hardware error status failed (all bits set); ignoring\n"); 2111 goto bail; 2112 } 2113 qib_stats.sps_hwerrs++; 2114 2115 /* Always clear the error status register, except BIST fail */ 2116 qib_write_kreg(dd, kr_hwerrclear, hwerrs & 2117 ~HWE_MASK(PowerOnBISTFailed)); 2118 2119 hwerrs &= dd->cspec->hwerrmask; 2120 2121 /* no EEPROM logging, yet */ 2122 2123 if (hwerrs) 2124 qib_devinfo(dd->pcidev, 2125 "Hardware error: hwerr=0x%llx (cleared)\n", 2126 (unsigned long long) hwerrs); 2127 2128 ctrl = qib_read_kreg32(dd, kr_control); 2129 if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) { 2130 /* 2131 * No recovery yet... 2132 */ 2133 if ((hwerrs & ~HWE_MASK(LATriggered)) || 2134 dd->cspec->stay_in_freeze) { 2135 /* 2136 * If any set that we aren't ignoring only make the 2137 * complaint once, in case it's stuck or recurring, 2138 * and we get here multiple times 2139 * Force link down, so switch knows, and 2140 * LEDs are turned off. 2141 */ 2142 if (dd->flags & QIB_INITTED) 2143 isfatal = 1; 2144 } else 2145 qib_7322_clear_freeze(dd); 2146 } 2147 2148 if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { 2149 isfatal = 1; 2150 strlcpy(msg, 2151 "[Memory BIST test failed, InfiniPath hardware unusable]", 2152 msgl); 2153 /* ignore from now on, so disable until driver reloaded */ 2154 dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); 2155 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 2156 } 2157 2158 err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs); 2159 2160 /* Ignore esoteric PLL failures et al. */ 2161 2162 qib_dev_err(dd, "%s hardware error\n", msg); 2163 2164 if (hwerrs & 2165 (SYM_MASK(HwErrMask, SDmaMemReadErrMask_0) | 2166 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) { 2167 int pidx = 0; 2168 int err; 2169 unsigned long flags; 2170 struct qib_pportdata *ppd = dd->pport; 2171 2172 for (; pidx < dd->num_pports; ++pidx, ppd++) { 2173 err = 0; 2174 if (pidx == 0 && (hwerrs & 2175 SYM_MASK(HwErrMask, SDmaMemReadErrMask_0))) 2176 err++; 2177 if (pidx == 1 && (hwerrs & 2178 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) 2179 err++; 2180 if (err) { 2181 spin_lock_irqsave(&ppd->sdma_lock, flags); 2182 dump_sdma_7322_state(ppd); 2183 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 2184 } 2185 } 2186 } 2187 2188 if (isfatal && !dd->diag_client) { 2189 qib_dev_err(dd, 2190 "Fatal Hardware Error, no longer usable, SN %.16s\n", 2191 dd->serial); 2192 /* 2193 * for /sys status file and user programs to print; if no 2194 * trailing brace is copied, we'll know it was truncated. 2195 */ 2196 if (dd->freezemsg) 2197 snprintf(dd->freezemsg, dd->freezelen, 2198 "{%s}", msg); 2199 qib_disable_after_error(dd); 2200 } 2201 bail:; 2202 } 2203 2204 /** 2205 * qib_7322_init_hwerrors - enable hardware errors 2206 * @dd: the qlogic_ib device 2207 * 2208 * now that we have finished initializing everything that might reasonably 2209 * cause a hardware error, and cleared those errors bits as they occur, 2210 * we can enable hardware errors in the mask (potentially enabling 2211 * freeze mode), and enable hardware errors as errors (along with 2212 * everything else) in errormask 2213 */ 2214 static void qib_7322_init_hwerrors(struct qib_devdata *dd) 2215 { 2216 int pidx; 2217 u64 extsval; 2218 2219 extsval = qib_read_kreg64(dd, kr_extstatus); 2220 if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED | 2221 QIB_EXTS_MEMBIST_ENDTEST))) 2222 qib_dev_err(dd, "MemBIST did not complete!\n"); 2223 2224 /* never clear BIST failure, so reported on each driver load */ 2225 qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); 2226 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 2227 2228 /* clear all */ 2229 qib_write_kreg(dd, kr_errclear, ~0ULL); 2230 /* enable errors that are masked, at least this first time. */ 2231 qib_write_kreg(dd, kr_errmask, ~0ULL); 2232 dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); 2233 for (pidx = 0; pidx < dd->num_pports; ++pidx) 2234 if (dd->pport[pidx].link_speed_supported) 2235 qib_write_kreg_port(dd->pport + pidx, krp_errmask, 2236 ~0ULL); 2237 } 2238 2239 /* 2240 * Disable and enable the armlaunch error. Used for PIO bandwidth testing 2241 * on chips that are count-based, rather than trigger-based. There is no 2242 * reference counting, but that's also fine, given the intended use. 2243 * Only chip-specific because it's all register accesses 2244 */ 2245 static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable) 2246 { 2247 if (enable) { 2248 qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH); 2249 dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH; 2250 } else 2251 dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH; 2252 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 2253 } 2254 2255 /* 2256 * Formerly took parameter <which> in pre-shifted, 2257 * pre-merged form with LinkCmd and LinkInitCmd 2258 * together, and assuming the zero was NOP. 2259 */ 2260 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, 2261 u16 linitcmd) 2262 { 2263 u64 mod_wd; 2264 struct qib_devdata *dd = ppd->dd; 2265 unsigned long flags; 2266 2267 if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { 2268 /* 2269 * If we are told to disable, note that so link-recovery 2270 * code does not attempt to bring us back up. 2271 * Also reset everything that we can, so we start 2272 * completely clean when re-enabled (before we 2273 * actually issue the disable to the IBC) 2274 */ 2275 qib_7322_mini_pcs_reset(ppd); 2276 spin_lock_irqsave(&ppd->lflags_lock, flags); 2277 ppd->lflags |= QIBL_IB_LINK_DISABLED; 2278 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2279 } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { 2280 /* 2281 * Any other linkinitcmd will lead to LINKDOWN and then 2282 * to INIT (if all is well), so clear flag to let 2283 * link-recovery code attempt to bring us back up. 2284 */ 2285 spin_lock_irqsave(&ppd->lflags_lock, flags); 2286 ppd->lflags &= ~QIBL_IB_LINK_DISABLED; 2287 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2288 /* 2289 * Clear status change interrupt reduction so the 2290 * new state is seen. 2291 */ 2292 ppd->cpspec->ibcctrl_a &= 2293 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 2294 } 2295 2296 mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) | 2297 (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); 2298 2299 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a | 2300 mod_wd); 2301 /* write to chip to prevent back-to-back writes of ibc reg */ 2302 qib_write_kreg(dd, kr_scratch, 0); 2303 2304 } 2305 2306 /* 2307 * The total RCV buffer memory is 64KB, used for both ports, and is 2308 * in units of 64 bytes (same as IB flow control credit unit). 2309 * The consumedVL unit in the same registers are in 32 byte units! 2310 * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks, 2311 * and we can therefore allocate just 9 IB credits for 2 VL15 packets 2312 * in krp_rxcreditvl15, rather than 10. 2313 */ 2314 #define RCV_BUF_UNITSZ 64 2315 #define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports)) 2316 2317 static void set_vls(struct qib_pportdata *ppd) 2318 { 2319 int i, numvls, totcred, cred_vl, vl0extra; 2320 struct qib_devdata *dd = ppd->dd; 2321 u64 val; 2322 2323 numvls = qib_num_vls(ppd->vls_operational); 2324 2325 /* 2326 * Set up per-VL credits. Below is kluge based on these assumptions: 2327 * 1) port is disabled at the time early_init is called. 2328 * 2) give VL15 17 credits, for two max-plausible packets. 2329 * 3) Give VL0-N the rest, with any rounding excess used for VL0 2330 */ 2331 /* 2 VL15 packets @ 288 bytes each (including IB headers) */ 2332 totcred = NUM_RCV_BUF_UNITS(dd); 2333 cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ; 2334 totcred -= cred_vl; 2335 qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl); 2336 cred_vl = totcred / numvls; 2337 vl0extra = totcred - cred_vl * numvls; 2338 qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra); 2339 for (i = 1; i < numvls; i++) 2340 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl); 2341 for (; i < 8; i++) /* no buffer space for other VLs */ 2342 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); 2343 2344 /* Notify IBC that credits need to be recalculated */ 2345 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); 2346 val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); 2347 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 2348 qib_write_kreg(dd, kr_scratch, 0ULL); 2349 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); 2350 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 2351 2352 for (i = 0; i < numvls; i++) 2353 val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i); 2354 val = qib_read_kreg_port(ppd, krp_rxcreditvl15); 2355 2356 /* Change the number of operational VLs */ 2357 ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a & 2358 ~SYM_MASK(IBCCtrlA_0, NumVLane)) | 2359 ((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane)); 2360 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 2361 qib_write_kreg(dd, kr_scratch, 0ULL); 2362 } 2363 2364 /* 2365 * The code that deals with actual SerDes is in serdes_7322_init(). 2366 * Compared to the code for iba7220, it is minimal. 2367 */ 2368 static int serdes_7322_init(struct qib_pportdata *ppd); 2369 2370 /** 2371 * qib_7322_bringup_serdes - bring up the serdes 2372 * @ppd: physical port on the qlogic_ib device 2373 */ 2374 static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) 2375 { 2376 struct qib_devdata *dd = ppd->dd; 2377 u64 val, guid, ibc; 2378 unsigned long flags; 2379 int ret = 0; 2380 2381 /* 2382 * SerDes model not in Pd, but still need to 2383 * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere 2384 * eventually. 2385 */ 2386 /* Put IBC in reset, sends disabled (should be in reset already) */ 2387 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); 2388 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 2389 qib_write_kreg(dd, kr_scratch, 0ULL); 2390 2391 /* ensure previous Tx parameters are not still forced */ 2392 qib_write_kreg_port(ppd, krp_tx_deemph_override, 2393 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 2394 reset_tx_deemphasis_override)); 2395 2396 if (qib_compat_ddr_negotiate) { 2397 ppd->cpspec->ibdeltainprog = 1; 2398 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, 2399 crp_ibsymbolerr); 2400 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, 2401 crp_iblinkerrrecov); 2402 } 2403 2404 /* flowcontrolwatermark is in units of KBytes */ 2405 ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark); 2406 /* 2407 * Flow control is sent this often, even if no changes in 2408 * buffer space occur. Units are 128ns for this chip. 2409 * Set to 3usec. 2410 */ 2411 ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod); 2412 /* max error tolerance */ 2413 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold); 2414 /* IB credit flow control. */ 2415 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold); 2416 /* 2417 * set initial max size pkt IBC will send, including ICRC; it's the 2418 * PIO buffer size in dwords, less 1; also see qib_set_mtu() 2419 */ 2420 ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << 2421 SYM_LSB(IBCCtrlA_0, MaxPktLen); 2422 ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */ 2423 2424 /* 2425 * Reset the PCS interface to the serdes (and also ibc, which is still 2426 * in reset from above). Writes new value of ibcctrl_a as last step. 2427 */ 2428 qib_7322_mini_pcs_reset(ppd); 2429 2430 if (!ppd->cpspec->ibcctrl_b) { 2431 unsigned lse = ppd->link_speed_enabled; 2432 2433 /* 2434 * Not on re-init after reset, establish shadow 2435 * and force initial config. 2436 */ 2437 ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd, 2438 krp_ibcctrl_b); 2439 ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR | 2440 IBA7322_IBC_SPEED_DDR | 2441 IBA7322_IBC_SPEED_SDR | 2442 IBA7322_IBC_WIDTH_AUTONEG | 2443 SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED)); 2444 if (lse & (lse - 1)) /* Muliple speeds enabled */ 2445 ppd->cpspec->ibcctrl_b |= 2446 (lse << IBA7322_IBC_SPEED_LSB) | 2447 IBA7322_IBC_IBTA_1_2_MASK | 2448 IBA7322_IBC_MAX_SPEED_MASK; 2449 else 2450 ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ? 2451 IBA7322_IBC_SPEED_QDR | 2452 IBA7322_IBC_IBTA_1_2_MASK : 2453 (lse == QIB_IB_DDR) ? 2454 IBA7322_IBC_SPEED_DDR : 2455 IBA7322_IBC_SPEED_SDR; 2456 if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) == 2457 (IB_WIDTH_1X | IB_WIDTH_4X)) 2458 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG; 2459 else 2460 ppd->cpspec->ibcctrl_b |= 2461 ppd->link_width_enabled == IB_WIDTH_4X ? 2462 IBA7322_IBC_WIDTH_4X_ONLY : 2463 IBA7322_IBC_WIDTH_1X_ONLY; 2464 2465 /* always enable these on driver reload, not sticky */ 2466 ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK | 2467 IBA7322_IBC_HRTBT_MASK); 2468 } 2469 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 2470 2471 /* setup so we have more time at CFGTEST to change H1 */ 2472 val = qib_read_kreg_port(ppd, krp_ibcctrl_c); 2473 val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH); 2474 val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH); 2475 qib_write_kreg_port(ppd, krp_ibcctrl_c, val); 2476 2477 serdes_7322_init(ppd); 2478 2479 guid = be64_to_cpu(ppd->guid); 2480 if (!guid) { 2481 if (dd->base_guid) 2482 guid = be64_to_cpu(dd->base_guid) + ppd->port - 1; 2483 ppd->guid = cpu_to_be64(guid); 2484 } 2485 2486 qib_write_kreg_port(ppd, krp_hrtbt_guid, guid); 2487 /* write to chip to prevent back-to-back writes of ibc reg */ 2488 qib_write_kreg(dd, kr_scratch, 0); 2489 2490 /* Enable port */ 2491 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); 2492 set_vls(ppd); 2493 2494 /* initially come up DISABLED, without sending anything. */ 2495 val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << 2496 QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); 2497 qib_write_kreg_port(ppd, krp_ibcctrl_a, val); 2498 qib_write_kreg(dd, kr_scratch, 0ULL); 2499 /* clear the linkinit cmds */ 2500 ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); 2501 2502 /* be paranoid against later code motion, etc. */ 2503 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 2504 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); 2505 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); 2506 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 2507 2508 /* Also enable IBSTATUSCHG interrupt. */ 2509 val = qib_read_kreg_port(ppd, krp_errmask); 2510 qib_write_kreg_port(ppd, krp_errmask, 2511 val | ERR_MASK_N(IBStatusChanged)); 2512 2513 /* Always zero until we start messing with SerDes for real */ 2514 return ret; 2515 } 2516 2517 /** 2518 * qib_7322_quiet_serdes - set serdes to txidle 2519 * @dd: the qlogic_ib device 2520 * Called when driver is being unloaded 2521 */ 2522 static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd) 2523 { 2524 u64 val; 2525 unsigned long flags; 2526 2527 qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 2528 2529 spin_lock_irqsave(&ppd->lflags_lock, flags); 2530 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; 2531 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2532 wake_up(&ppd->cpspec->autoneg_wait); 2533 cancel_delayed_work_sync(&ppd->cpspec->autoneg_work); 2534 if (ppd->dd->cspec->r1) 2535 cancel_delayed_work_sync(&ppd->cpspec->ipg_work); 2536 2537 ppd->cpspec->chase_end = 0; 2538 if (ppd->cpspec->chase_timer.function) /* if initted */ 2539 del_timer_sync(&ppd->cpspec->chase_timer); 2540 2541 /* 2542 * Despite the name, actually disables IBC as well. Do it when 2543 * we are as sure as possible that no more packets can be 2544 * received, following the down and the PCS reset. 2545 * The actual disabling happens in qib_7322_mini_pci_reset(), 2546 * along with the PCS being reset. 2547 */ 2548 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); 2549 qib_7322_mini_pcs_reset(ppd); 2550 2551 /* 2552 * Update the adjusted counters so the adjustment persists 2553 * across driver reload. 2554 */ 2555 if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta || 2556 ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) { 2557 struct qib_devdata *dd = ppd->dd; 2558 u64 diagc; 2559 2560 /* enable counter writes */ 2561 diagc = qib_read_kreg64(dd, kr_hwdiagctrl); 2562 qib_write_kreg(dd, kr_hwdiagctrl, 2563 diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); 2564 2565 if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) { 2566 val = read_7322_creg32_port(ppd, crp_ibsymbolerr); 2567 if (ppd->cpspec->ibdeltainprog) 2568 val -= val - ppd->cpspec->ibsymsnap; 2569 val -= ppd->cpspec->ibsymdelta; 2570 write_7322_creg_port(ppd, crp_ibsymbolerr, val); 2571 } 2572 if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) { 2573 val = read_7322_creg32_port(ppd, crp_iblinkerrrecov); 2574 if (ppd->cpspec->ibdeltainprog) 2575 val -= val - ppd->cpspec->iblnkerrsnap; 2576 val -= ppd->cpspec->iblnkerrdelta; 2577 write_7322_creg_port(ppd, crp_iblinkerrrecov, val); 2578 } 2579 if (ppd->cpspec->iblnkdowndelta) { 2580 val = read_7322_creg32_port(ppd, crp_iblinkdown); 2581 val += ppd->cpspec->iblnkdowndelta; 2582 write_7322_creg_port(ppd, crp_iblinkdown, val); 2583 } 2584 /* 2585 * No need to save ibmalfdelta since IB perfcounters 2586 * are cleared on driver reload. 2587 */ 2588 2589 /* and disable counter writes */ 2590 qib_write_kreg(dd, kr_hwdiagctrl, diagc); 2591 } 2592 } 2593 2594 /** 2595 * qib_setup_7322_setextled - set the state of the two external LEDs 2596 * @ppd: physical port on the qlogic_ib device 2597 * @on: whether the link is up or not 2598 * 2599 * The exact combo of LEDs if on is true is determined by looking 2600 * at the ibcstatus. 2601 * 2602 * These LEDs indicate the physical and logical state of IB link. 2603 * For this chip (at least with recommended board pinouts), LED1 2604 * is Yellow (logical state) and LED2 is Green (physical state), 2605 * 2606 * Note: We try to match the Mellanox HCA LED behavior as best 2607 * we can. Green indicates physical link state is OK (something is 2608 * plugged in, and we can train). 2609 * Amber indicates the link is logically up (ACTIVE). 2610 * Mellanox further blinks the amber LED to indicate data packet 2611 * activity, but we have no hardware support for that, so it would 2612 * require waking up every 10-20 msecs and checking the counters 2613 * on the chip, and then turning the LED off if appropriate. That's 2614 * visible overhead, so not something we will do. 2615 */ 2616 static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on) 2617 { 2618 struct qib_devdata *dd = ppd->dd; 2619 u64 extctl, ledblink = 0, val; 2620 unsigned long flags; 2621 int yel, grn; 2622 2623 /* 2624 * The diags use the LED to indicate diag info, so we leave 2625 * the external LED alone when the diags are running. 2626 */ 2627 if (dd->diag_client) 2628 return; 2629 2630 /* Allow override of LED display for, e.g. Locating system in rack */ 2631 if (ppd->led_override) { 2632 grn = (ppd->led_override & QIB_LED_PHYS); 2633 yel = (ppd->led_override & QIB_LED_LOG); 2634 } else if (on) { 2635 val = qib_read_kreg_port(ppd, krp_ibcstatus_a); 2636 grn = qib_7322_phys_portstate(val) == 2637 IB_PHYSPORTSTATE_LINKUP; 2638 yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE; 2639 } else { 2640 grn = 0; 2641 yel = 0; 2642 } 2643 2644 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 2645 extctl = dd->cspec->extctrl & (ppd->port == 1 ? 2646 ~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK); 2647 if (grn) { 2648 extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN; 2649 /* 2650 * Counts are in chip clock (4ns) periods. 2651 * This is 1/16 sec (66.6ms) on, 2652 * 3/16 sec (187.5 ms) off, with packets rcvd. 2653 */ 2654 ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) | 2655 ((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT); 2656 } 2657 if (yel) 2658 extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL; 2659 dd->cspec->extctrl = extctl; 2660 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 2661 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 2662 2663 if (ledblink) /* blink the LED on packet receive */ 2664 qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink); 2665 } 2666 2667 #ifdef CONFIG_INFINIBAND_QIB_DCA 2668 2669 static int qib_7322_notify_dca(struct qib_devdata *dd, unsigned long event) 2670 { 2671 switch (event) { 2672 case DCA_PROVIDER_ADD: 2673 if (dd->flags & QIB_DCA_ENABLED) 2674 break; 2675 if (!dca_add_requester(&dd->pcidev->dev)) { 2676 qib_devinfo(dd->pcidev, "DCA enabled\n"); 2677 dd->flags |= QIB_DCA_ENABLED; 2678 qib_setup_dca(dd); 2679 } 2680 break; 2681 case DCA_PROVIDER_REMOVE: 2682 if (dd->flags & QIB_DCA_ENABLED) { 2683 dca_remove_requester(&dd->pcidev->dev); 2684 dd->flags &= ~QIB_DCA_ENABLED; 2685 dd->cspec->dca_ctrl = 0; 2686 qib_write_kreg(dd, KREG_IDX(DCACtrlA), 2687 dd->cspec->dca_ctrl); 2688 } 2689 break; 2690 } 2691 return 0; 2692 } 2693 2694 static void qib_update_rhdrq_dca(struct qib_ctxtdata *rcd, int cpu) 2695 { 2696 struct qib_devdata *dd = rcd->dd; 2697 struct qib_chip_specific *cspec = dd->cspec; 2698 2699 if (!(dd->flags & QIB_DCA_ENABLED)) 2700 return; 2701 if (cspec->rhdr_cpu[rcd->ctxt] != cpu) { 2702 const struct dca_reg_map *rmp; 2703 2704 cspec->rhdr_cpu[rcd->ctxt] = cpu; 2705 rmp = &dca_rcvhdr_reg_map[rcd->ctxt]; 2706 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] &= rmp->mask; 2707 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] |= 2708 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << rmp->lsb; 2709 qib_devinfo(dd->pcidev, 2710 "Ctxt %d cpu %d dca %llx\n", rcd->ctxt, cpu, 2711 (long long) cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); 2712 qib_write_kreg(dd, rmp->regno, 2713 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); 2714 cspec->dca_ctrl |= SYM_MASK(DCACtrlA, RcvHdrqDCAEnable); 2715 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); 2716 } 2717 } 2718 2719 static void qib_update_sdma_dca(struct qib_pportdata *ppd, int cpu) 2720 { 2721 struct qib_devdata *dd = ppd->dd; 2722 struct qib_chip_specific *cspec = dd->cspec; 2723 unsigned pidx = ppd->port - 1; 2724 2725 if (!(dd->flags & QIB_DCA_ENABLED)) 2726 return; 2727 if (cspec->sdma_cpu[pidx] != cpu) { 2728 cspec->sdma_cpu[pidx] = cpu; 2729 cspec->dca_rcvhdr_ctrl[4] &= ~(ppd->hw_pidx ? 2730 SYM_MASK(DCACtrlF, SendDma1DCAOPH) : 2731 SYM_MASK(DCACtrlF, SendDma0DCAOPH)); 2732 cspec->dca_rcvhdr_ctrl[4] |= 2733 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << 2734 (ppd->hw_pidx ? 2735 SYM_LSB(DCACtrlF, SendDma1DCAOPH) : 2736 SYM_LSB(DCACtrlF, SendDma0DCAOPH)); 2737 qib_devinfo(dd->pcidev, 2738 "sdma %d cpu %d dca %llx\n", ppd->hw_pidx, cpu, 2739 (long long) cspec->dca_rcvhdr_ctrl[4]); 2740 qib_write_kreg(dd, KREG_IDX(DCACtrlF), 2741 cspec->dca_rcvhdr_ctrl[4]); 2742 cspec->dca_ctrl |= ppd->hw_pidx ? 2743 SYM_MASK(DCACtrlA, SendDMAHead1DCAEnable) : 2744 SYM_MASK(DCACtrlA, SendDMAHead0DCAEnable); 2745 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); 2746 } 2747 } 2748 2749 static void qib_setup_dca(struct qib_devdata *dd) 2750 { 2751 struct qib_chip_specific *cspec = dd->cspec; 2752 int i; 2753 2754 for (i = 0; i < ARRAY_SIZE(cspec->rhdr_cpu); i++) 2755 cspec->rhdr_cpu[i] = -1; 2756 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) 2757 cspec->sdma_cpu[i] = -1; 2758 cspec->dca_rcvhdr_ctrl[0] = 2759 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq0DCAXfrCnt)) | 2760 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq1DCAXfrCnt)) | 2761 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq2DCAXfrCnt)) | 2762 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq3DCAXfrCnt)); 2763 cspec->dca_rcvhdr_ctrl[1] = 2764 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq4DCAXfrCnt)) | 2765 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq5DCAXfrCnt)) | 2766 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq6DCAXfrCnt)) | 2767 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq7DCAXfrCnt)); 2768 cspec->dca_rcvhdr_ctrl[2] = 2769 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq8DCAXfrCnt)) | 2770 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq9DCAXfrCnt)) | 2771 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq10DCAXfrCnt)) | 2772 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq11DCAXfrCnt)); 2773 cspec->dca_rcvhdr_ctrl[3] = 2774 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq12DCAXfrCnt)) | 2775 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq13DCAXfrCnt)) | 2776 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq14DCAXfrCnt)) | 2777 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq15DCAXfrCnt)); 2778 cspec->dca_rcvhdr_ctrl[4] = 2779 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq16DCAXfrCnt)) | 2780 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq17DCAXfrCnt)); 2781 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) 2782 qib_write_kreg(dd, KREG_IDX(DCACtrlB) + i, 2783 cspec->dca_rcvhdr_ctrl[i]); 2784 for (i = 0; i < cspec->num_msix_entries; i++) 2785 setup_dca_notifier(dd, i); 2786 } 2787 2788 static void qib_irq_notifier_notify(struct irq_affinity_notify *notify, 2789 const cpumask_t *mask) 2790 { 2791 struct qib_irq_notify *n = 2792 container_of(notify, struct qib_irq_notify, notify); 2793 int cpu = cpumask_first(mask); 2794 2795 if (n->rcv) { 2796 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; 2797 2798 qib_update_rhdrq_dca(rcd, cpu); 2799 } else { 2800 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; 2801 2802 qib_update_sdma_dca(ppd, cpu); 2803 } 2804 } 2805 2806 static void qib_irq_notifier_release(struct kref *ref) 2807 { 2808 struct qib_irq_notify *n = 2809 container_of(ref, struct qib_irq_notify, notify.kref); 2810 struct qib_devdata *dd; 2811 2812 if (n->rcv) { 2813 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; 2814 2815 dd = rcd->dd; 2816 } else { 2817 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; 2818 2819 dd = ppd->dd; 2820 } 2821 qib_devinfo(dd->pcidev, 2822 "release on HCA notify 0x%p n 0x%p\n", ref, n); 2823 kfree(n); 2824 } 2825 #endif 2826 2827 static void qib_7322_free_irq(struct qib_devdata *dd) 2828 { 2829 u64 intgranted; 2830 int i; 2831 2832 dd->cspec->main_int_mask = ~0ULL; 2833 2834 for (i = 0; i < dd->cspec->num_msix_entries; i++) { 2835 /* only free IRQs that were allocated */ 2836 if (dd->cspec->msix_entries[i].arg) { 2837 #ifdef CONFIG_INFINIBAND_QIB_DCA 2838 reset_dca_notifier(dd, i); 2839 #endif 2840 irq_set_affinity_hint(pci_irq_vector(dd->pcidev, i), 2841 NULL); 2842 free_cpumask_var(dd->cspec->msix_entries[i].mask); 2843 pci_free_irq(dd->pcidev, i, 2844 dd->cspec->msix_entries[i].arg); 2845 } 2846 } 2847 2848 /* If num_msix_entries was 0, disable the INTx IRQ */ 2849 if (!dd->cspec->num_msix_entries) 2850 pci_free_irq(dd->pcidev, 0, dd); 2851 else 2852 dd->cspec->num_msix_entries = 0; 2853 2854 pci_free_irq_vectors(dd->pcidev); 2855 2856 /* make sure no MSIx interrupts are left pending */ 2857 intgranted = qib_read_kreg64(dd, kr_intgranted); 2858 if (intgranted) 2859 qib_write_kreg(dd, kr_intgranted, intgranted); 2860 } 2861 2862 static void qib_setup_7322_cleanup(struct qib_devdata *dd) 2863 { 2864 int i; 2865 2866 #ifdef CONFIG_INFINIBAND_QIB_DCA 2867 if (dd->flags & QIB_DCA_ENABLED) { 2868 dca_remove_requester(&dd->pcidev->dev); 2869 dd->flags &= ~QIB_DCA_ENABLED; 2870 dd->cspec->dca_ctrl = 0; 2871 qib_write_kreg(dd, KREG_IDX(DCACtrlA), dd->cspec->dca_ctrl); 2872 } 2873 #endif 2874 2875 qib_7322_free_irq(dd); 2876 kfree(dd->cspec->cntrs); 2877 kfree(dd->cspec->sendchkenable); 2878 kfree(dd->cspec->sendgrhchk); 2879 kfree(dd->cspec->sendibchk); 2880 kfree(dd->cspec->msix_entries); 2881 for (i = 0; i < dd->num_pports; i++) { 2882 unsigned long flags; 2883 u32 mask = QSFP_GPIO_MOD_PRS_N | 2884 (QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT); 2885 2886 kfree(dd->pport[i].cpspec->portcntrs); 2887 if (dd->flags & QIB_HAS_QSFP) { 2888 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 2889 dd->cspec->gpio_mask &= ~mask; 2890 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 2891 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 2892 } 2893 } 2894 } 2895 2896 /* handle SDMA interrupts */ 2897 static void sdma_7322_intr(struct qib_devdata *dd, u64 istat) 2898 { 2899 struct qib_pportdata *ppd0 = &dd->pport[0]; 2900 struct qib_pportdata *ppd1 = &dd->pport[1]; 2901 u64 intr0 = istat & (INT_MASK_P(SDma, 0) | 2902 INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0)); 2903 u64 intr1 = istat & (INT_MASK_P(SDma, 1) | 2904 INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1)); 2905 2906 if (intr0) 2907 qib_sdma_intr(ppd0); 2908 if (intr1) 2909 qib_sdma_intr(ppd1); 2910 2911 if (istat & INT_MASK_PM(SDmaCleanupDone, 0)) 2912 qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started); 2913 if (istat & INT_MASK_PM(SDmaCleanupDone, 1)) 2914 qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started); 2915 } 2916 2917 /* 2918 * Set or clear the Send buffer available interrupt enable bit. 2919 */ 2920 static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint) 2921 { 2922 unsigned long flags; 2923 2924 spin_lock_irqsave(&dd->sendctrl_lock, flags); 2925 if (needint) 2926 dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail); 2927 else 2928 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail); 2929 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); 2930 qib_write_kreg(dd, kr_scratch, 0ULL); 2931 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 2932 } 2933 2934 /* 2935 * Somehow got an interrupt with reserved bits set in interrupt status. 2936 * Print a message so we know it happened, then clear them. 2937 * keep mainline interrupt handler cache-friendly 2938 */ 2939 static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat) 2940 { 2941 u64 kills; 2942 char msg[128]; 2943 2944 kills = istat & ~QIB_I_BITSEXTANT; 2945 qib_dev_err(dd, 2946 "Clearing reserved interrupt(s) 0x%016llx: %s\n", 2947 (unsigned long long) kills, msg); 2948 qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills)); 2949 } 2950 2951 /* keep mainline interrupt handler cache-friendly */ 2952 static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd) 2953 { 2954 u32 gpiostatus; 2955 int handled = 0; 2956 int pidx; 2957 2958 /* 2959 * Boards for this chip currently don't use GPIO interrupts, 2960 * so clear by writing GPIOstatus to GPIOclear, and complain 2961 * to developer. To avoid endless repeats, clear 2962 * the bits in the mask, since there is some kind of 2963 * programming error or chip problem. 2964 */ 2965 gpiostatus = qib_read_kreg32(dd, kr_gpio_status); 2966 /* 2967 * In theory, writing GPIOstatus to GPIOclear could 2968 * have a bad side-effect on some diagnostic that wanted 2969 * to poll for a status-change, but the various shadows 2970 * make that problematic at best. Diags will just suppress 2971 * all GPIO interrupts during such tests. 2972 */ 2973 qib_write_kreg(dd, kr_gpio_clear, gpiostatus); 2974 /* 2975 * Check for QSFP MOD_PRS changes 2976 * only works for single port if IB1 != pidx1 2977 */ 2978 for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP); 2979 ++pidx) { 2980 struct qib_pportdata *ppd; 2981 struct qib_qsfp_data *qd; 2982 u32 mask; 2983 2984 if (!dd->pport[pidx].link_speed_supported) 2985 continue; 2986 mask = QSFP_GPIO_MOD_PRS_N; 2987 ppd = dd->pport + pidx; 2988 mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); 2989 if (gpiostatus & dd->cspec->gpio_mask & mask) { 2990 u64 pins; 2991 2992 qd = &ppd->cpspec->qsfp_data; 2993 gpiostatus &= ~mask; 2994 pins = qib_read_kreg64(dd, kr_extstatus); 2995 pins >>= SYM_LSB(EXTStatus, GPIOIn); 2996 if (!(pins & mask)) { 2997 ++handled; 2998 qd->t_insert = jiffies; 2999 queue_work(ib_wq, &qd->work); 3000 } 3001 } 3002 } 3003 3004 if (gpiostatus && !handled) { 3005 const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); 3006 u32 gpio_irq = mask & gpiostatus; 3007 3008 /* 3009 * Clear any troublemakers, and update chip from shadow 3010 */ 3011 dd->cspec->gpio_mask &= ~gpio_irq; 3012 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 3013 } 3014 } 3015 3016 /* 3017 * Handle errors and unusual events first, separate function 3018 * to improve cache hits for fast path interrupt handling. 3019 */ 3020 static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat) 3021 { 3022 if (istat & ~QIB_I_BITSEXTANT) 3023 unknown_7322_ibits(dd, istat); 3024 if (istat & QIB_I_GPIO) 3025 unknown_7322_gpio_intr(dd); 3026 if (istat & QIB_I_C_ERROR) { 3027 qib_write_kreg(dd, kr_errmask, 0ULL); 3028 tasklet_schedule(&dd->error_tasklet); 3029 } 3030 if (istat & INT_MASK_P(Err, 0) && dd->rcd[0]) 3031 handle_7322_p_errors(dd->rcd[0]->ppd); 3032 if (istat & INT_MASK_P(Err, 1) && dd->rcd[1]) 3033 handle_7322_p_errors(dd->rcd[1]->ppd); 3034 } 3035 3036 /* 3037 * Dynamically adjust the rcv int timeout for a context based on incoming 3038 * packet rate. 3039 */ 3040 static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts) 3041 { 3042 struct qib_devdata *dd = rcd->dd; 3043 u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt]; 3044 3045 /* 3046 * Dynamically adjust idle timeout on chip 3047 * based on number of packets processed. 3048 */ 3049 if (npkts < rcv_int_count && timeout > 2) 3050 timeout >>= 1; 3051 else if (npkts >= rcv_int_count && timeout < rcv_int_timeout) 3052 timeout = min(timeout << 1, rcv_int_timeout); 3053 else 3054 return; 3055 3056 dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout; 3057 qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout); 3058 } 3059 3060 /* 3061 * This is the main interrupt handler. 3062 * It will normally only be used for low frequency interrupts but may 3063 * have to handle all interrupts if INTx is enabled or fewer than normal 3064 * MSIx interrupts were allocated. 3065 * This routine should ignore the interrupt bits for any of the 3066 * dedicated MSIx handlers. 3067 */ 3068 static irqreturn_t qib_7322intr(int irq, void *data) 3069 { 3070 struct qib_devdata *dd = data; 3071 irqreturn_t ret; 3072 u64 istat; 3073 u64 ctxtrbits; 3074 u64 rmask; 3075 unsigned i; 3076 u32 npkts; 3077 3078 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { 3079 /* 3080 * This return value is not great, but we do not want the 3081 * interrupt core code to remove our interrupt handler 3082 * because we don't appear to be handling an interrupt 3083 * during a chip reset. 3084 */ 3085 ret = IRQ_HANDLED; 3086 goto bail; 3087 } 3088 3089 istat = qib_read_kreg64(dd, kr_intstatus); 3090 3091 if (unlikely(istat == ~0ULL)) { 3092 qib_bad_intrstatus(dd); 3093 qib_dev_err(dd, "Interrupt status all f's, skipping\n"); 3094 /* don't know if it was our interrupt or not */ 3095 ret = IRQ_NONE; 3096 goto bail; 3097 } 3098 3099 istat &= dd->cspec->main_int_mask; 3100 if (unlikely(!istat)) { 3101 /* already handled, or shared and not us */ 3102 ret = IRQ_NONE; 3103 goto bail; 3104 } 3105 3106 this_cpu_inc(*dd->int_counter); 3107 3108 /* handle "errors" of various kinds first, device ahead of port */ 3109 if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO | 3110 QIB_I_C_ERROR | INT_MASK_P(Err, 0) | 3111 INT_MASK_P(Err, 1)))) 3112 unlikely_7322_intr(dd, istat); 3113 3114 /* 3115 * Clear the interrupt bits we found set, relatively early, so we 3116 * "know" know the chip will have seen this by the time we process 3117 * the queue, and will re-interrupt if necessary. The processor 3118 * itself won't take the interrupt again until we return. 3119 */ 3120 qib_write_kreg(dd, kr_intclear, istat); 3121 3122 /* 3123 * Handle kernel receive queues before checking for pio buffers 3124 * available since receives can overflow; piobuf waiters can afford 3125 * a few extra cycles, since they were waiting anyway. 3126 */ 3127 ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK); 3128 if (ctxtrbits) { 3129 rmask = (1ULL << QIB_I_RCVAVAIL_LSB) | 3130 (1ULL << QIB_I_RCVURG_LSB); 3131 for (i = 0; i < dd->first_user_ctxt; i++) { 3132 if (ctxtrbits & rmask) { 3133 ctxtrbits &= ~rmask; 3134 if (dd->rcd[i]) 3135 qib_kreceive(dd->rcd[i], NULL, &npkts); 3136 } 3137 rmask <<= 1; 3138 } 3139 if (ctxtrbits) { 3140 ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) | 3141 (ctxtrbits >> QIB_I_RCVURG_LSB); 3142 qib_handle_urcv(dd, ctxtrbits); 3143 } 3144 } 3145 3146 if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1))) 3147 sdma_7322_intr(dd, istat); 3148 3149 if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) 3150 qib_ib_piobufavail(dd); 3151 3152 ret = IRQ_HANDLED; 3153 bail: 3154 return ret; 3155 } 3156 3157 /* 3158 * Dedicated receive packet available interrupt handler. 3159 */ 3160 static irqreturn_t qib_7322pintr(int irq, void *data) 3161 { 3162 struct qib_ctxtdata *rcd = data; 3163 struct qib_devdata *dd = rcd->dd; 3164 u32 npkts; 3165 3166 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3167 /* 3168 * This return value is not great, but we do not want the 3169 * interrupt core code to remove our interrupt handler 3170 * because we don't appear to be handling an interrupt 3171 * during a chip reset. 3172 */ 3173 return IRQ_HANDLED; 3174 3175 this_cpu_inc(*dd->int_counter); 3176 3177 /* Clear the interrupt bit we expect to be set. */ 3178 qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) | 3179 (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt); 3180 3181 qib_kreceive(rcd, NULL, &npkts); 3182 3183 return IRQ_HANDLED; 3184 } 3185 3186 /* 3187 * Dedicated Send buffer available interrupt handler. 3188 */ 3189 static irqreturn_t qib_7322bufavail(int irq, void *data) 3190 { 3191 struct qib_devdata *dd = data; 3192 3193 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3194 /* 3195 * This return value is not great, but we do not want the 3196 * interrupt core code to remove our interrupt handler 3197 * because we don't appear to be handling an interrupt 3198 * during a chip reset. 3199 */ 3200 return IRQ_HANDLED; 3201 3202 this_cpu_inc(*dd->int_counter); 3203 3204 /* Clear the interrupt bit we expect to be set. */ 3205 qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL); 3206 3207 /* qib_ib_piobufavail() will clear the want PIO interrupt if needed */ 3208 if (dd->flags & QIB_INITTED) 3209 qib_ib_piobufavail(dd); 3210 else 3211 qib_wantpiobuf_7322_intr(dd, 0); 3212 3213 return IRQ_HANDLED; 3214 } 3215 3216 /* 3217 * Dedicated Send DMA interrupt handler. 3218 */ 3219 static irqreturn_t sdma_intr(int irq, void *data) 3220 { 3221 struct qib_pportdata *ppd = data; 3222 struct qib_devdata *dd = ppd->dd; 3223 3224 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3225 /* 3226 * This return value is not great, but we do not want the 3227 * interrupt core code to remove our interrupt handler 3228 * because we don't appear to be handling an interrupt 3229 * during a chip reset. 3230 */ 3231 return IRQ_HANDLED; 3232 3233 this_cpu_inc(*dd->int_counter); 3234 3235 /* Clear the interrupt bit we expect to be set. */ 3236 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3237 INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0)); 3238 qib_sdma_intr(ppd); 3239 3240 return IRQ_HANDLED; 3241 } 3242 3243 /* 3244 * Dedicated Send DMA idle interrupt handler. 3245 */ 3246 static irqreturn_t sdma_idle_intr(int irq, void *data) 3247 { 3248 struct qib_pportdata *ppd = data; 3249 struct qib_devdata *dd = ppd->dd; 3250 3251 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3252 /* 3253 * This return value is not great, but we do not want the 3254 * interrupt core code to remove our interrupt handler 3255 * because we don't appear to be handling an interrupt 3256 * during a chip reset. 3257 */ 3258 return IRQ_HANDLED; 3259 3260 this_cpu_inc(*dd->int_counter); 3261 3262 /* Clear the interrupt bit we expect to be set. */ 3263 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3264 INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0)); 3265 qib_sdma_intr(ppd); 3266 3267 return IRQ_HANDLED; 3268 } 3269 3270 /* 3271 * Dedicated Send DMA progress interrupt handler. 3272 */ 3273 static irqreturn_t sdma_progress_intr(int irq, void *data) 3274 { 3275 struct qib_pportdata *ppd = data; 3276 struct qib_devdata *dd = ppd->dd; 3277 3278 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3279 /* 3280 * This return value is not great, but we do not want the 3281 * interrupt core code to remove our interrupt handler 3282 * because we don't appear to be handling an interrupt 3283 * during a chip reset. 3284 */ 3285 return IRQ_HANDLED; 3286 3287 this_cpu_inc(*dd->int_counter); 3288 3289 /* Clear the interrupt bit we expect to be set. */ 3290 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3291 INT_MASK_P(SDmaProgress, 1) : 3292 INT_MASK_P(SDmaProgress, 0)); 3293 qib_sdma_intr(ppd); 3294 3295 return IRQ_HANDLED; 3296 } 3297 3298 /* 3299 * Dedicated Send DMA cleanup interrupt handler. 3300 */ 3301 static irqreturn_t sdma_cleanup_intr(int irq, void *data) 3302 { 3303 struct qib_pportdata *ppd = data; 3304 struct qib_devdata *dd = ppd->dd; 3305 3306 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3307 /* 3308 * This return value is not great, but we do not want the 3309 * interrupt core code to remove our interrupt handler 3310 * because we don't appear to be handling an interrupt 3311 * during a chip reset. 3312 */ 3313 return IRQ_HANDLED; 3314 3315 this_cpu_inc(*dd->int_counter); 3316 3317 /* Clear the interrupt bit we expect to be set. */ 3318 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3319 INT_MASK_PM(SDmaCleanupDone, 1) : 3320 INT_MASK_PM(SDmaCleanupDone, 0)); 3321 qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started); 3322 3323 return IRQ_HANDLED; 3324 } 3325 3326 #ifdef CONFIG_INFINIBAND_QIB_DCA 3327 3328 static void reset_dca_notifier(struct qib_devdata *dd, int msixnum) 3329 { 3330 if (!dd->cspec->msix_entries[msixnum].dca) 3331 return; 3332 3333 qib_devinfo(dd->pcidev, "Disabling notifier on HCA %d irq %d\n", 3334 dd->unit, pci_irq_vector(dd->pcidev, msixnum)); 3335 irq_set_affinity_notifier(pci_irq_vector(dd->pcidev, msixnum), NULL); 3336 dd->cspec->msix_entries[msixnum].notifier = NULL; 3337 } 3338 3339 static void setup_dca_notifier(struct qib_devdata *dd, int msixnum) 3340 { 3341 struct qib_msix_entry *m = &dd->cspec->msix_entries[msixnum]; 3342 struct qib_irq_notify *n; 3343 3344 if (!m->dca) 3345 return; 3346 n = kzalloc(sizeof(*n), GFP_KERNEL); 3347 if (n) { 3348 int ret; 3349 3350 m->notifier = n; 3351 n->notify.irq = pci_irq_vector(dd->pcidev, msixnum); 3352 n->notify.notify = qib_irq_notifier_notify; 3353 n->notify.release = qib_irq_notifier_release; 3354 n->arg = m->arg; 3355 n->rcv = m->rcv; 3356 qib_devinfo(dd->pcidev, 3357 "set notifier irq %d rcv %d notify %p\n", 3358 n->notify.irq, n->rcv, &n->notify); 3359 ret = irq_set_affinity_notifier( 3360 n->notify.irq, 3361 &n->notify); 3362 if (ret) { 3363 m->notifier = NULL; 3364 kfree(n); 3365 } 3366 } 3367 } 3368 3369 #endif 3370 3371 /* 3372 * Set up our chip-specific interrupt handler. 3373 * The interrupt type has already been setup, so 3374 * we just need to do the registration and error checking. 3375 * If we are using MSIx interrupts, we may fall back to 3376 * INTx later, if the interrupt handler doesn't get called 3377 * within 1/2 second (see verify_interrupt()). 3378 */ 3379 static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend) 3380 { 3381 int ret, i, msixnum; 3382 u64 redirect[6]; 3383 u64 mask; 3384 const struct cpumask *local_mask; 3385 int firstcpu, secondcpu = 0, currrcvcpu = 0; 3386 3387 if (!dd->num_pports) 3388 return; 3389 3390 if (clearpend) { 3391 /* 3392 * if not switching interrupt types, be sure interrupts are 3393 * disabled, and then clear anything pending at this point, 3394 * because we are starting clean. 3395 */ 3396 qib_7322_set_intr_state(dd, 0); 3397 3398 /* clear the reset error, init error/hwerror mask */ 3399 qib_7322_init_hwerrors(dd); 3400 3401 /* clear any interrupt bits that might be set */ 3402 qib_write_kreg(dd, kr_intclear, ~0ULL); 3403 3404 /* make sure no pending MSIx intr, and clear diag reg */ 3405 qib_write_kreg(dd, kr_intgranted, ~0ULL); 3406 qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL); 3407 } 3408 3409 if (!dd->cspec->num_msix_entries) { 3410 /* Try to get INTx interrupt */ 3411 try_intx: 3412 ret = pci_request_irq(dd->pcidev, 0, qib_7322intr, NULL, dd, 3413 QIB_DRV_NAME); 3414 if (ret) { 3415 qib_dev_err( 3416 dd, 3417 "Couldn't setup INTx interrupt (irq=%d): %d\n", 3418 pci_irq_vector(dd->pcidev, 0), ret); 3419 return; 3420 } 3421 dd->cspec->main_int_mask = ~0ULL; 3422 return; 3423 } 3424 3425 /* Try to get MSIx interrupts */ 3426 memset(redirect, 0, sizeof(redirect)); 3427 mask = ~0ULL; 3428 msixnum = 0; 3429 local_mask = cpumask_of_pcibus(dd->pcidev->bus); 3430 firstcpu = cpumask_first(local_mask); 3431 if (firstcpu >= nr_cpu_ids || 3432 cpumask_weight(local_mask) == num_online_cpus()) { 3433 local_mask = topology_core_cpumask(0); 3434 firstcpu = cpumask_first(local_mask); 3435 } 3436 if (firstcpu < nr_cpu_ids) { 3437 secondcpu = cpumask_next(firstcpu, local_mask); 3438 if (secondcpu >= nr_cpu_ids) 3439 secondcpu = firstcpu; 3440 currrcvcpu = secondcpu; 3441 } 3442 for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) { 3443 irq_handler_t handler; 3444 void *arg; 3445 int lsb, reg, sh; 3446 #ifdef CONFIG_INFINIBAND_QIB_DCA 3447 int dca = 0; 3448 #endif 3449 if (i < ARRAY_SIZE(irq_table)) { 3450 if (irq_table[i].port) { 3451 /* skip if for a non-configured port */ 3452 if (irq_table[i].port > dd->num_pports) 3453 continue; 3454 arg = dd->pport + irq_table[i].port - 1; 3455 } else 3456 arg = dd; 3457 #ifdef CONFIG_INFINIBAND_QIB_DCA 3458 dca = irq_table[i].dca; 3459 #endif 3460 lsb = irq_table[i].lsb; 3461 handler = irq_table[i].handler; 3462 ret = pci_request_irq(dd->pcidev, msixnum, handler, 3463 NULL, arg, QIB_DRV_NAME "%d%s", 3464 dd->unit, 3465 irq_table[i].name); 3466 } else { 3467 unsigned ctxt; 3468 3469 ctxt = i - ARRAY_SIZE(irq_table); 3470 /* per krcvq context receive interrupt */ 3471 arg = dd->rcd[ctxt]; 3472 if (!arg) 3473 continue; 3474 if (qib_krcvq01_no_msi && ctxt < 2) 3475 continue; 3476 #ifdef CONFIG_INFINIBAND_QIB_DCA 3477 dca = 1; 3478 #endif 3479 lsb = QIB_I_RCVAVAIL_LSB + ctxt; 3480 handler = qib_7322pintr; 3481 ret = pci_request_irq(dd->pcidev, msixnum, handler, 3482 NULL, arg, 3483 QIB_DRV_NAME "%d (kctx)", 3484 dd->unit); 3485 } 3486 3487 if (ret) { 3488 /* 3489 * Shouldn't happen since the enable said we could 3490 * have as many as we are trying to setup here. 3491 */ 3492 qib_dev_err(dd, 3493 "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n", 3494 msixnum, 3495 pci_irq_vector(dd->pcidev, msixnum), 3496 ret); 3497 qib_7322_free_irq(dd); 3498 pci_alloc_irq_vectors(dd->pcidev, 1, 1, 3499 PCI_IRQ_LEGACY); 3500 goto try_intx; 3501 } 3502 dd->cspec->msix_entries[msixnum].arg = arg; 3503 #ifdef CONFIG_INFINIBAND_QIB_DCA 3504 dd->cspec->msix_entries[msixnum].dca = dca; 3505 dd->cspec->msix_entries[msixnum].rcv = 3506 handler == qib_7322pintr; 3507 #endif 3508 if (lsb >= 0) { 3509 reg = lsb / IBA7322_REDIRECT_VEC_PER_REG; 3510 sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) * 3511 SYM_LSB(IntRedirect0, vec1); 3512 mask &= ~(1ULL << lsb); 3513 redirect[reg] |= ((u64) msixnum) << sh; 3514 } 3515 qib_read_kreg64(dd, 2 * msixnum + 1 + 3516 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3517 if (firstcpu < nr_cpu_ids && 3518 zalloc_cpumask_var( 3519 &dd->cspec->msix_entries[msixnum].mask, 3520 GFP_KERNEL)) { 3521 if (handler == qib_7322pintr) { 3522 cpumask_set_cpu(currrcvcpu, 3523 dd->cspec->msix_entries[msixnum].mask); 3524 currrcvcpu = cpumask_next(currrcvcpu, 3525 local_mask); 3526 if (currrcvcpu >= nr_cpu_ids) 3527 currrcvcpu = secondcpu; 3528 } else { 3529 cpumask_set_cpu(firstcpu, 3530 dd->cspec->msix_entries[msixnum].mask); 3531 } 3532 irq_set_affinity_hint( 3533 pci_irq_vector(dd->pcidev, msixnum), 3534 dd->cspec->msix_entries[msixnum].mask); 3535 } 3536 msixnum++; 3537 } 3538 /* Initialize the vector mapping */ 3539 for (i = 0; i < ARRAY_SIZE(redirect); i++) 3540 qib_write_kreg(dd, kr_intredirect + i, redirect[i]); 3541 dd->cspec->main_int_mask = mask; 3542 tasklet_init(&dd->error_tasklet, qib_error_tasklet, 3543 (unsigned long)dd); 3544 } 3545 3546 /** 3547 * qib_7322_boardname - fill in the board name and note features 3548 * @dd: the qlogic_ib device 3549 * 3550 * info will be based on the board revision register 3551 */ 3552 static unsigned qib_7322_boardname(struct qib_devdata *dd) 3553 { 3554 /* Will need enumeration of board-types here */ 3555 u32 boardid; 3556 unsigned int features = DUAL_PORT_CAP; 3557 3558 boardid = SYM_FIELD(dd->revision, Revision, BoardID); 3559 3560 switch (boardid) { 3561 case 0: 3562 dd->boardname = "InfiniPath_QLE7342_Emulation"; 3563 break; 3564 case 1: 3565 dd->boardname = "InfiniPath_QLE7340"; 3566 dd->flags |= QIB_HAS_QSFP; 3567 features = PORT_SPD_CAP; 3568 break; 3569 case 2: 3570 dd->boardname = "InfiniPath_QLE7342"; 3571 dd->flags |= QIB_HAS_QSFP; 3572 break; 3573 case 3: 3574 dd->boardname = "InfiniPath_QMI7342"; 3575 break; 3576 case 4: 3577 dd->boardname = "InfiniPath_Unsupported7342"; 3578 qib_dev_err(dd, "Unsupported version of QMH7342\n"); 3579 features = 0; 3580 break; 3581 case BOARD_QMH7342: 3582 dd->boardname = "InfiniPath_QMH7342"; 3583 features = 0x24; 3584 break; 3585 case BOARD_QME7342: 3586 dd->boardname = "InfiniPath_QME7342"; 3587 break; 3588 case 8: 3589 dd->boardname = "InfiniPath_QME7362"; 3590 dd->flags |= QIB_HAS_QSFP; 3591 break; 3592 case BOARD_QMH7360: 3593 dd->boardname = "Intel IB QDR 1P FLR-QSFP Adptr"; 3594 dd->flags |= QIB_HAS_QSFP; 3595 break; 3596 case 15: 3597 dd->boardname = "InfiniPath_QLE7342_TEST"; 3598 dd->flags |= QIB_HAS_QSFP; 3599 break; 3600 default: 3601 dd->boardname = "InfiniPath_QLE73xy_UNKNOWN"; 3602 qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid); 3603 break; 3604 } 3605 dd->board_atten = 1; /* index into txdds_Xdr */ 3606 3607 snprintf(dd->boardversion, sizeof(dd->boardversion), 3608 "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", 3609 QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, 3610 (unsigned int)SYM_FIELD(dd->revision, Revision_R, Arch), 3611 dd->majrev, dd->minrev, 3612 (unsigned int)SYM_FIELD(dd->revision, Revision_R, SW)); 3613 3614 if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) { 3615 qib_devinfo(dd->pcidev, 3616 "IB%u: Forced to single port mode by module parameter\n", 3617 dd->unit); 3618 features &= PORT_SPD_CAP; 3619 } 3620 3621 return features; 3622 } 3623 3624 /* 3625 * This routine sleeps, so it can only be called from user context, not 3626 * from interrupt context. 3627 */ 3628 static int qib_do_7322_reset(struct qib_devdata *dd) 3629 { 3630 u64 val; 3631 u64 *msix_vecsave = NULL; 3632 int i, msix_entries, ret = 1; 3633 u16 cmdval; 3634 u8 int_line, clinesz; 3635 unsigned long flags; 3636 3637 /* Use dev_err so it shows up in logs, etc. */ 3638 qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); 3639 3640 qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); 3641 3642 msix_entries = dd->cspec->num_msix_entries; 3643 3644 /* no interrupts till re-initted */ 3645 qib_7322_set_intr_state(dd, 0); 3646 3647 qib_7322_free_irq(dd); 3648 3649 if (msix_entries) { 3650 /* can be up to 512 bytes, too big for stack */ 3651 msix_vecsave = kmalloc_array(2 * dd->cspec->num_msix_entries, 3652 sizeof(u64), 3653 GFP_KERNEL); 3654 } 3655 3656 /* 3657 * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector 3658 * info that is set up by the BIOS, so we have to save and restore 3659 * it ourselves. There is some risk something could change it, 3660 * after we save it, but since we have disabled the MSIx, it 3661 * shouldn't be touched... 3662 */ 3663 for (i = 0; i < msix_entries; i++) { 3664 u64 vecaddr, vecdata; 3665 3666 vecaddr = qib_read_kreg64(dd, 2 * i + 3667 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3668 vecdata = qib_read_kreg64(dd, 1 + 2 * i + 3669 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3670 if (msix_vecsave) { 3671 msix_vecsave[2 * i] = vecaddr; 3672 /* save it without the masked bit set */ 3673 msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL; 3674 } 3675 } 3676 3677 dd->pport->cpspec->ibdeltainprog = 0; 3678 dd->pport->cpspec->ibsymdelta = 0; 3679 dd->pport->cpspec->iblnkerrdelta = 0; 3680 dd->pport->cpspec->ibmalfdelta = 0; 3681 /* so we check interrupts work again */ 3682 dd->z_int_counter = qib_int_counter(dd); 3683 3684 /* 3685 * Keep chip from being accessed until we are ready. Use 3686 * writeq() directly, to allow the write even though QIB_PRESENT 3687 * isn't set. 3688 */ 3689 dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); 3690 dd->flags |= QIB_DOING_RESET; 3691 val = dd->control | QLOGIC_IB_C_RESET; 3692 writeq(val, &dd->kregbase[kr_control]); 3693 3694 for (i = 1; i <= 5; i++) { 3695 /* 3696 * Allow MBIST, etc. to complete; longer on each retry. 3697 * We sometimes get machine checks from bus timeout if no 3698 * response, so for now, make it *really* long. 3699 */ 3700 msleep(1000 + (1 + i) * 3000); 3701 3702 qib_pcie_reenable(dd, cmdval, int_line, clinesz); 3703 3704 /* 3705 * Use readq directly, so we don't need to mark it as PRESENT 3706 * until we get a successful indication that all is well. 3707 */ 3708 val = readq(&dd->kregbase[kr_revision]); 3709 if (val == dd->revision) 3710 break; 3711 if (i == 5) { 3712 qib_dev_err(dd, 3713 "Failed to initialize after reset, unusable\n"); 3714 ret = 0; 3715 goto bail; 3716 } 3717 } 3718 3719 dd->flags |= QIB_PRESENT; /* it's back */ 3720 3721 if (msix_entries) { 3722 /* restore the MSIx vector address and data if saved above */ 3723 for (i = 0; i < msix_entries; i++) { 3724 if (!msix_vecsave || !msix_vecsave[2 * i]) 3725 continue; 3726 qib_write_kreg(dd, 2 * i + 3727 (QIB_7322_MsixTable_OFFS / sizeof(u64)), 3728 msix_vecsave[2 * i]); 3729 qib_write_kreg(dd, 1 + 2 * i + 3730 (QIB_7322_MsixTable_OFFS / sizeof(u64)), 3731 msix_vecsave[1 + 2 * i]); 3732 } 3733 } 3734 3735 /* initialize the remaining registers. */ 3736 for (i = 0; i < dd->num_pports; ++i) 3737 write_7322_init_portregs(&dd->pport[i]); 3738 write_7322_initregs(dd); 3739 3740 if (qib_pcie_params(dd, dd->lbus_width, &msix_entries)) 3741 qib_dev_err(dd, 3742 "Reset failed to setup PCIe or interrupts; continuing anyway\n"); 3743 3744 dd->cspec->num_msix_entries = msix_entries; 3745 qib_setup_7322_interrupt(dd, 1); 3746 3747 for (i = 0; i < dd->num_pports; ++i) { 3748 struct qib_pportdata *ppd = &dd->pport[i]; 3749 3750 spin_lock_irqsave(&ppd->lflags_lock, flags); 3751 ppd->lflags |= QIBL_IB_FORCE_NOTIFY; 3752 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 3753 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 3754 } 3755 3756 bail: 3757 dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */ 3758 kfree(msix_vecsave); 3759 return ret; 3760 } 3761 3762 /** 3763 * qib_7322_put_tid - write a TID to the chip 3764 * @dd: the qlogic_ib device 3765 * @tidptr: pointer to the expected TID (in chip) to update 3766 * @tidtype: 0 for eager, 1 for expected 3767 * @pa: physical address of in memory buffer; tidinvalid if freeing 3768 */ 3769 static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, 3770 u32 type, unsigned long pa) 3771 { 3772 if (!(dd->flags & QIB_PRESENT)) 3773 return; 3774 if (pa != dd->tidinvalid) { 3775 u64 chippa = pa >> IBA7322_TID_PA_SHIFT; 3776 3777 /* paranoia checks */ 3778 if (pa != (chippa << IBA7322_TID_PA_SHIFT)) { 3779 qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", 3780 pa); 3781 return; 3782 } 3783 if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) { 3784 qib_dev_err(dd, 3785 "Physical page address 0x%lx larger than supported\n", 3786 pa); 3787 return; 3788 } 3789 3790 if (type == RCVHQ_RCV_TYPE_EAGER) 3791 chippa |= dd->tidtemplate; 3792 else /* for now, always full 4KB page */ 3793 chippa |= IBA7322_TID_SZ_4K; 3794 pa = chippa; 3795 } 3796 writeq(pa, tidptr); 3797 mmiowb(); 3798 } 3799 3800 /** 3801 * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager 3802 * @dd: the qlogic_ib device 3803 * @ctxt: the ctxt 3804 * 3805 * clear all TID entries for a ctxt, expected and eager. 3806 * Used from qib_close(). 3807 */ 3808 static void qib_7322_clear_tids(struct qib_devdata *dd, 3809 struct qib_ctxtdata *rcd) 3810 { 3811 u64 __iomem *tidbase; 3812 unsigned long tidinv; 3813 u32 ctxt; 3814 int i; 3815 3816 if (!dd->kregbase || !rcd) 3817 return; 3818 3819 ctxt = rcd->ctxt; 3820 3821 tidinv = dd->tidinvalid; 3822 tidbase = (u64 __iomem *) 3823 ((char __iomem *) dd->kregbase + 3824 dd->rcvtidbase + 3825 ctxt * dd->rcvtidcnt * sizeof(*tidbase)); 3826 3827 for (i = 0; i < dd->rcvtidcnt; i++) 3828 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, 3829 tidinv); 3830 3831 tidbase = (u64 __iomem *) 3832 ((char __iomem *) dd->kregbase + 3833 dd->rcvegrbase + 3834 rcd->rcvegr_tid_base * sizeof(*tidbase)); 3835 3836 for (i = 0; i < rcd->rcvegrcnt; i++) 3837 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, 3838 tidinv); 3839 } 3840 3841 /** 3842 * qib_7322_tidtemplate - setup constants for TID updates 3843 * @dd: the qlogic_ib device 3844 * 3845 * We setup stuff that we use a lot, to avoid calculating each time 3846 */ 3847 static void qib_7322_tidtemplate(struct qib_devdata *dd) 3848 { 3849 /* 3850 * For now, we always allocate 4KB buffers (at init) so we can 3851 * receive max size packets. We may want a module parameter to 3852 * specify 2KB or 4KB and/or make it per port instead of per device 3853 * for those who want to reduce memory footprint. Note that the 3854 * rcvhdrentsize size must be large enough to hold the largest 3855 * IB header (currently 96 bytes) that we expect to handle (plus of 3856 * course the 2 dwords of RHF). 3857 */ 3858 if (dd->rcvegrbufsize == 2048) 3859 dd->tidtemplate = IBA7322_TID_SZ_2K; 3860 else if (dd->rcvegrbufsize == 4096) 3861 dd->tidtemplate = IBA7322_TID_SZ_4K; 3862 dd->tidinvalid = 0; 3863 } 3864 3865 /** 3866 * qib_init_7322_get_base_info - set chip-specific flags for user code 3867 * @rcd: the qlogic_ib ctxt 3868 * @kbase: qib_base_info pointer 3869 * 3870 * We set the PCIE flag because the lower bandwidth on PCIe vs 3871 * HyperTransport can affect some user packet algorithims. 3872 */ 3873 3874 static int qib_7322_get_base_info(struct qib_ctxtdata *rcd, 3875 struct qib_base_info *kinfo) 3876 { 3877 kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP | 3878 QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL | 3879 QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA; 3880 if (rcd->dd->cspec->r1) 3881 kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK; 3882 if (rcd->dd->flags & QIB_USE_SPCL_TRIG) 3883 kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER; 3884 3885 return 0; 3886 } 3887 3888 static struct qib_message_header * 3889 qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) 3890 { 3891 u32 offset = qib_hdrget_offset(rhf_addr); 3892 3893 return (struct qib_message_header *) 3894 (rhf_addr - dd->rhf_offset + offset); 3895 } 3896 3897 /* 3898 * Configure number of contexts. 3899 */ 3900 static void qib_7322_config_ctxts(struct qib_devdata *dd) 3901 { 3902 unsigned long flags; 3903 u32 nchipctxts; 3904 3905 nchipctxts = qib_read_kreg32(dd, kr_contextcnt); 3906 dd->cspec->numctxts = nchipctxts; 3907 if (qib_n_krcv_queues > 1 && dd->num_pports) { 3908 dd->first_user_ctxt = NUM_IB_PORTS + 3909 (qib_n_krcv_queues - 1) * dd->num_pports; 3910 if (dd->first_user_ctxt > nchipctxts) 3911 dd->first_user_ctxt = nchipctxts; 3912 dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports; 3913 } else { 3914 dd->first_user_ctxt = NUM_IB_PORTS; 3915 dd->n_krcv_queues = 1; 3916 } 3917 3918 if (!qib_cfgctxts) { 3919 int nctxts = dd->first_user_ctxt + num_online_cpus(); 3920 3921 if (nctxts <= 6) 3922 dd->ctxtcnt = 6; 3923 else if (nctxts <= 10) 3924 dd->ctxtcnt = 10; 3925 else if (nctxts <= nchipctxts) 3926 dd->ctxtcnt = nchipctxts; 3927 } else if (qib_cfgctxts < dd->num_pports) 3928 dd->ctxtcnt = dd->num_pports; 3929 else if (qib_cfgctxts <= nchipctxts) 3930 dd->ctxtcnt = qib_cfgctxts; 3931 if (!dd->ctxtcnt) /* none of the above, set to max */ 3932 dd->ctxtcnt = nchipctxts; 3933 3934 /* 3935 * Chip can be configured for 6, 10, or 18 ctxts, and choice 3936 * affects number of eager TIDs per ctxt (1K, 2K, 4K). 3937 * Lock to be paranoid about later motion, etc. 3938 */ 3939 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 3940 if (dd->ctxtcnt > 10) 3941 dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg); 3942 else if (dd->ctxtcnt > 6) 3943 dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg); 3944 /* else configure for default 6 receive ctxts */ 3945 3946 /* The XRC opcode is 5. */ 3947 dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode); 3948 3949 /* 3950 * RcvCtrl *must* be written here so that the 3951 * chip understands how to change rcvegrcnt below. 3952 */ 3953 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); 3954 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 3955 3956 /* kr_rcvegrcnt changes based on the number of contexts enabled */ 3957 dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); 3958 if (qib_rcvhdrcnt) 3959 dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, qib_rcvhdrcnt); 3960 else 3961 dd->rcvhdrcnt = 2 * max(dd->cspec->rcvegrcnt, 3962 dd->num_pports > 1 ? 1024U : 2048U); 3963 } 3964 3965 static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which) 3966 { 3967 3968 int lsb, ret = 0; 3969 u64 maskr; /* right-justified mask */ 3970 3971 switch (which) { 3972 3973 case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */ 3974 ret = ppd->link_width_enabled; 3975 goto done; 3976 3977 case QIB_IB_CFG_LWID: /* Get currently active Link-width */ 3978 ret = ppd->link_width_active; 3979 goto done; 3980 3981 case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */ 3982 ret = ppd->link_speed_enabled; 3983 goto done; 3984 3985 case QIB_IB_CFG_SPD: /* Get current Link spd */ 3986 ret = ppd->link_speed_active; 3987 goto done; 3988 3989 case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */ 3990 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 3991 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 3992 break; 3993 3994 case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */ 3995 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 3996 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 3997 break; 3998 3999 case QIB_IB_CFG_LINKLATENCY: 4000 ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) & 4001 SYM_MASK(IBCStatusB_0, LinkRoundTripLatency); 4002 goto done; 4003 4004 case QIB_IB_CFG_OP_VLS: 4005 ret = ppd->vls_operational; 4006 goto done; 4007 4008 case QIB_IB_CFG_VL_HIGH_CAP: 4009 ret = 16; 4010 goto done; 4011 4012 case QIB_IB_CFG_VL_LOW_CAP: 4013 ret = 16; 4014 goto done; 4015 4016 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ 4017 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4018 OverrunThreshold); 4019 goto done; 4020 4021 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ 4022 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4023 PhyerrThreshold); 4024 goto done; 4025 4026 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ 4027 /* will only take effect when the link state changes */ 4028 ret = (ppd->cpspec->ibcctrl_a & 4029 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ? 4030 IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; 4031 goto done; 4032 4033 case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ 4034 lsb = IBA7322_IBC_HRTBT_LSB; 4035 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ 4036 break; 4037 4038 case QIB_IB_CFG_PMA_TICKS: 4039 /* 4040 * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs 4041 * Since the clock is always 250MHz, the value is 3, 1 or 0. 4042 */ 4043 if (ppd->link_speed_active == QIB_IB_QDR) 4044 ret = 3; 4045 else if (ppd->link_speed_active == QIB_IB_DDR) 4046 ret = 1; 4047 else 4048 ret = 0; 4049 goto done; 4050 4051 default: 4052 ret = -EINVAL; 4053 goto done; 4054 } 4055 ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr); 4056 done: 4057 return ret; 4058 } 4059 4060 /* 4061 * Below again cribbed liberally from older version. Do not lean 4062 * heavily on it. 4063 */ 4064 #define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB 4065 #define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \ 4066 | (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16)) 4067 4068 static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) 4069 { 4070 struct qib_devdata *dd = ppd->dd; 4071 u64 maskr; /* right-justified mask */ 4072 int lsb, ret = 0; 4073 u16 lcmd, licmd; 4074 unsigned long flags; 4075 4076 switch (which) { 4077 case QIB_IB_CFG_LIDLMC: 4078 /* 4079 * Set LID and LMC. Combined to avoid possible hazard 4080 * caller puts LMC in 16MSbits, DLID in 16LSbits of val 4081 */ 4082 lsb = IBA7322_IBC_DLIDLMC_SHIFT; 4083 maskr = IBA7322_IBC_DLIDLMC_MASK; 4084 /* 4085 * For header-checking, the SLID in the packet will 4086 * be masked with SendIBSLMCMask, and compared 4087 * with SendIBSLIDAssignMask. Make sure we do not 4088 * set any bits not covered by the mask, or we get 4089 * false-positives. 4090 */ 4091 qib_write_kreg_port(ppd, krp_sendslid, 4092 val & (val >> 16) & SendIBSLIDAssignMask); 4093 qib_write_kreg_port(ppd, krp_sendslidmask, 4094 (val >> 16) & SendIBSLMCMask); 4095 break; 4096 4097 case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */ 4098 ppd->link_width_enabled = val; 4099 /* convert IB value to chip register value */ 4100 if (val == IB_WIDTH_1X) 4101 val = 0; 4102 else if (val == IB_WIDTH_4X) 4103 val = 1; 4104 else 4105 val = 3; 4106 maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS); 4107 lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS); 4108 break; 4109 4110 case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */ 4111 /* 4112 * As with width, only write the actual register if the 4113 * link is currently down, otherwise takes effect on next 4114 * link change. Since setting is being explicitly requested 4115 * (via MAD or sysfs), clear autoneg failure status if speed 4116 * autoneg is enabled. 4117 */ 4118 ppd->link_speed_enabled = val; 4119 val <<= IBA7322_IBC_SPEED_LSB; 4120 maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK | 4121 IBA7322_IBC_MAX_SPEED_MASK; 4122 if (val & (val - 1)) { 4123 /* Muliple speeds enabled */ 4124 val |= IBA7322_IBC_IBTA_1_2_MASK | 4125 IBA7322_IBC_MAX_SPEED_MASK; 4126 spin_lock_irqsave(&ppd->lflags_lock, flags); 4127 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 4128 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 4129 } else if (val & IBA7322_IBC_SPEED_QDR) 4130 val |= IBA7322_IBC_IBTA_1_2_MASK; 4131 /* IBTA 1.2 mode + min/max + speed bits are contiguous */ 4132 lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE); 4133 break; 4134 4135 case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */ 4136 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4137 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4138 break; 4139 4140 case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */ 4141 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4142 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4143 break; 4144 4145 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ 4146 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4147 OverrunThreshold); 4148 if (maskr != val) { 4149 ppd->cpspec->ibcctrl_a &= 4150 ~SYM_MASK(IBCCtrlA_0, OverrunThreshold); 4151 ppd->cpspec->ibcctrl_a |= (u64) val << 4152 SYM_LSB(IBCCtrlA_0, OverrunThreshold); 4153 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4154 ppd->cpspec->ibcctrl_a); 4155 qib_write_kreg(dd, kr_scratch, 0ULL); 4156 } 4157 goto bail; 4158 4159 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ 4160 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4161 PhyerrThreshold); 4162 if (maskr != val) { 4163 ppd->cpspec->ibcctrl_a &= 4164 ~SYM_MASK(IBCCtrlA_0, PhyerrThreshold); 4165 ppd->cpspec->ibcctrl_a |= (u64) val << 4166 SYM_LSB(IBCCtrlA_0, PhyerrThreshold); 4167 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4168 ppd->cpspec->ibcctrl_a); 4169 qib_write_kreg(dd, kr_scratch, 0ULL); 4170 } 4171 goto bail; 4172 4173 case QIB_IB_CFG_PKEYS: /* update pkeys */ 4174 maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | 4175 ((u64) ppd->pkeys[2] << 32) | 4176 ((u64) ppd->pkeys[3] << 48); 4177 qib_write_kreg_port(ppd, krp_partitionkey, maskr); 4178 goto bail; 4179 4180 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ 4181 /* will only take effect when the link state changes */ 4182 if (val == IB_LINKINITCMD_POLL) 4183 ppd->cpspec->ibcctrl_a &= 4184 ~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); 4185 else /* SLEEP */ 4186 ppd->cpspec->ibcctrl_a |= 4187 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); 4188 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 4189 qib_write_kreg(dd, kr_scratch, 0ULL); 4190 goto bail; 4191 4192 case QIB_IB_CFG_MTU: /* update the MTU in IBC */ 4193 /* 4194 * Update our housekeeping variables, and set IBC max 4195 * size, same as init code; max IBC is max we allow in 4196 * buffer, less the qword pbc, plus 1 for ICRC, in dwords 4197 * Set even if it's unchanged, print debug message only 4198 * on changes. 4199 */ 4200 val = (ppd->ibmaxlen >> 2) + 1; 4201 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen); 4202 ppd->cpspec->ibcctrl_a |= (u64)val << 4203 SYM_LSB(IBCCtrlA_0, MaxPktLen); 4204 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4205 ppd->cpspec->ibcctrl_a); 4206 qib_write_kreg(dd, kr_scratch, 0ULL); 4207 goto bail; 4208 4209 case QIB_IB_CFG_LSTATE: /* set the IB link state */ 4210 switch (val & 0xffff0000) { 4211 case IB_LINKCMD_DOWN: 4212 lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; 4213 ppd->cpspec->ibmalfusesnap = 1; 4214 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, 4215 crp_errlink); 4216 if (!ppd->cpspec->ibdeltainprog && 4217 qib_compat_ddr_negotiate) { 4218 ppd->cpspec->ibdeltainprog = 1; 4219 ppd->cpspec->ibsymsnap = 4220 read_7322_creg32_port(ppd, 4221 crp_ibsymbolerr); 4222 ppd->cpspec->iblnkerrsnap = 4223 read_7322_creg32_port(ppd, 4224 crp_iblinkerrrecov); 4225 } 4226 break; 4227 4228 case IB_LINKCMD_ARMED: 4229 lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; 4230 if (ppd->cpspec->ibmalfusesnap) { 4231 ppd->cpspec->ibmalfusesnap = 0; 4232 ppd->cpspec->ibmalfdelta += 4233 read_7322_creg32_port(ppd, 4234 crp_errlink) - 4235 ppd->cpspec->ibmalfsnap; 4236 } 4237 break; 4238 4239 case IB_LINKCMD_ACTIVE: 4240 lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; 4241 break; 4242 4243 default: 4244 ret = -EINVAL; 4245 qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); 4246 goto bail; 4247 } 4248 switch (val & 0xffff) { 4249 case IB_LINKINITCMD_NOP: 4250 licmd = 0; 4251 break; 4252 4253 case IB_LINKINITCMD_POLL: 4254 licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; 4255 break; 4256 4257 case IB_LINKINITCMD_SLEEP: 4258 licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; 4259 break; 4260 4261 case IB_LINKINITCMD_DISABLE: 4262 licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; 4263 ppd->cpspec->chase_end = 0; 4264 /* 4265 * stop state chase counter and timer, if running. 4266 * wait forpending timer, but don't clear .data (ppd)! 4267 */ 4268 if (ppd->cpspec->chase_timer.expires) { 4269 del_timer_sync(&ppd->cpspec->chase_timer); 4270 ppd->cpspec->chase_timer.expires = 0; 4271 } 4272 break; 4273 4274 default: 4275 ret = -EINVAL; 4276 qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", 4277 val & 0xffff); 4278 goto bail; 4279 } 4280 qib_set_ib_7322_lstate(ppd, lcmd, licmd); 4281 goto bail; 4282 4283 case QIB_IB_CFG_OP_VLS: 4284 if (ppd->vls_operational != val) { 4285 ppd->vls_operational = val; 4286 set_vls(ppd); 4287 } 4288 goto bail; 4289 4290 case QIB_IB_CFG_VL_HIGH_LIMIT: 4291 qib_write_kreg_port(ppd, krp_highprio_limit, val); 4292 goto bail; 4293 4294 case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */ 4295 if (val > 3) { 4296 ret = -EINVAL; 4297 goto bail; 4298 } 4299 lsb = IBA7322_IBC_HRTBT_LSB; 4300 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ 4301 break; 4302 4303 case QIB_IB_CFG_PORT: 4304 /* val is the port number of the switch we are connected to. */ 4305 if (ppd->dd->cspec->r1) { 4306 cancel_delayed_work(&ppd->cpspec->ipg_work); 4307 ppd->cpspec->ipg_tries = 0; 4308 } 4309 goto bail; 4310 4311 default: 4312 ret = -EINVAL; 4313 goto bail; 4314 } 4315 ppd->cpspec->ibcctrl_b &= ~(maskr << lsb); 4316 ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb); 4317 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 4318 qib_write_kreg(dd, kr_scratch, 0); 4319 bail: 4320 return ret; 4321 } 4322 4323 static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what) 4324 { 4325 int ret = 0; 4326 u64 val, ctrlb; 4327 4328 /* only IBC loopback, may add serdes and xgxs loopbacks later */ 4329 if (!strncmp(what, "ibc", 3)) { 4330 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, 4331 Loopback); 4332 val = 0; /* disable heart beat, so link will come up */ 4333 qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", 4334 ppd->dd->unit, ppd->port); 4335 } else if (!strncmp(what, "off", 3)) { 4336 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, 4337 Loopback); 4338 /* enable heart beat again */ 4339 val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB; 4340 qib_devinfo(ppd->dd->pcidev, 4341 "Disabling IB%u:%u IBC loopback (normal)\n", 4342 ppd->dd->unit, ppd->port); 4343 } else 4344 ret = -EINVAL; 4345 if (!ret) { 4346 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4347 ppd->cpspec->ibcctrl_a); 4348 ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK 4349 << IBA7322_IBC_HRTBT_LSB); 4350 ppd->cpspec->ibcctrl_b = ctrlb | val; 4351 qib_write_kreg_port(ppd, krp_ibcctrl_b, 4352 ppd->cpspec->ibcctrl_b); 4353 qib_write_kreg(ppd->dd, kr_scratch, 0); 4354 } 4355 return ret; 4356 } 4357 4358 static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno, 4359 struct ib_vl_weight_elem *vl) 4360 { 4361 unsigned i; 4362 4363 for (i = 0; i < 16; i++, regno++, vl++) { 4364 u32 val = qib_read_kreg_port(ppd, regno); 4365 4366 vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) & 4367 SYM_RMASK(LowPriority0_0, VirtualLane); 4368 vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) & 4369 SYM_RMASK(LowPriority0_0, Weight); 4370 } 4371 } 4372 4373 static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno, 4374 struct ib_vl_weight_elem *vl) 4375 { 4376 unsigned i; 4377 4378 for (i = 0; i < 16; i++, regno++, vl++) { 4379 u64 val; 4380 4381 val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) << 4382 SYM_LSB(LowPriority0_0, VirtualLane)) | 4383 ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) << 4384 SYM_LSB(LowPriority0_0, Weight)); 4385 qib_write_kreg_port(ppd, regno, val); 4386 } 4387 if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) { 4388 struct qib_devdata *dd = ppd->dd; 4389 unsigned long flags; 4390 4391 spin_lock_irqsave(&dd->sendctrl_lock, flags); 4392 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn); 4393 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 4394 qib_write_kreg(dd, kr_scratch, 0); 4395 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 4396 } 4397 } 4398 4399 static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t) 4400 { 4401 switch (which) { 4402 case QIB_IB_TBL_VL_HIGH_ARB: 4403 get_vl_weights(ppd, krp_highprio_0, t); 4404 break; 4405 4406 case QIB_IB_TBL_VL_LOW_ARB: 4407 get_vl_weights(ppd, krp_lowprio_0, t); 4408 break; 4409 4410 default: 4411 return -EINVAL; 4412 } 4413 return 0; 4414 } 4415 4416 static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t) 4417 { 4418 switch (which) { 4419 case QIB_IB_TBL_VL_HIGH_ARB: 4420 set_vl_weights(ppd, krp_highprio_0, t); 4421 break; 4422 4423 case QIB_IB_TBL_VL_LOW_ARB: 4424 set_vl_weights(ppd, krp_lowprio_0, t); 4425 break; 4426 4427 default: 4428 return -EINVAL; 4429 } 4430 return 0; 4431 } 4432 4433 static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd, 4434 u32 updegr, u32 egrhd, u32 npkts) 4435 { 4436 /* 4437 * Need to write timeout register before updating rcvhdrhead to ensure 4438 * that the timer is enabled on reception of a packet. 4439 */ 4440 if (hd >> IBA7322_HDRHEAD_PKTINT_SHIFT) 4441 adjust_rcv_timeout(rcd, npkts); 4442 if (updegr) 4443 qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); 4444 mmiowb(); 4445 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); 4446 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); 4447 mmiowb(); 4448 } 4449 4450 static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd) 4451 { 4452 u32 head, tail; 4453 4454 head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); 4455 if (rcd->rcvhdrtail_kvaddr) 4456 tail = qib_get_rcvhdrtail(rcd); 4457 else 4458 tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); 4459 return head == tail; 4460 } 4461 4462 #define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \ 4463 QIB_RCVCTRL_CTXT_DIS | \ 4464 QIB_RCVCTRL_TIDFLOW_ENB | \ 4465 QIB_RCVCTRL_TIDFLOW_DIS | \ 4466 QIB_RCVCTRL_TAILUPD_ENB | \ 4467 QIB_RCVCTRL_TAILUPD_DIS | \ 4468 QIB_RCVCTRL_INTRAVAIL_ENB | \ 4469 QIB_RCVCTRL_INTRAVAIL_DIS | \ 4470 QIB_RCVCTRL_BP_ENB | \ 4471 QIB_RCVCTRL_BP_DIS) 4472 4473 #define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \ 4474 QIB_RCVCTRL_CTXT_DIS | \ 4475 QIB_RCVCTRL_PKEY_DIS | \ 4476 QIB_RCVCTRL_PKEY_ENB) 4477 4478 /* 4479 * Modify the RCVCTRL register in chip-specific way. This 4480 * is a function because bit positions and (future) register 4481 * location is chip-specifc, but the needed operations are 4482 * generic. <op> is a bit-mask because we often want to 4483 * do multiple modifications. 4484 */ 4485 static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, 4486 int ctxt) 4487 { 4488 struct qib_devdata *dd = ppd->dd; 4489 struct qib_ctxtdata *rcd; 4490 u64 mask, val; 4491 unsigned long flags; 4492 4493 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 4494 4495 if (op & QIB_RCVCTRL_TIDFLOW_ENB) 4496 dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable); 4497 if (op & QIB_RCVCTRL_TIDFLOW_DIS) 4498 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable); 4499 if (op & QIB_RCVCTRL_TAILUPD_ENB) 4500 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); 4501 if (op & QIB_RCVCTRL_TAILUPD_DIS) 4502 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd); 4503 if (op & QIB_RCVCTRL_PKEY_ENB) 4504 ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); 4505 if (op & QIB_RCVCTRL_PKEY_DIS) 4506 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); 4507 if (ctxt < 0) { 4508 mask = (1ULL << dd->ctxtcnt) - 1; 4509 rcd = NULL; 4510 } else { 4511 mask = (1ULL << ctxt); 4512 rcd = dd->rcd[ctxt]; 4513 } 4514 if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) { 4515 ppd->p_rcvctrl |= 4516 (mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); 4517 if (!(dd->flags & QIB_NODMA_RTAIL)) { 4518 op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */ 4519 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); 4520 } 4521 /* Write these registers before the context is enabled. */ 4522 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 4523 rcd->rcvhdrqtailaddr_phys); 4524 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 4525 rcd->rcvhdrq_phys); 4526 rcd->seq_cnt = 1; 4527 } 4528 if (op & QIB_RCVCTRL_CTXT_DIS) 4529 ppd->p_rcvctrl &= 4530 ~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); 4531 if (op & QIB_RCVCTRL_BP_ENB) 4532 dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull); 4533 if (op & QIB_RCVCTRL_BP_DIS) 4534 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull)); 4535 if (op & QIB_RCVCTRL_INTRAVAIL_ENB) 4536 dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail)); 4537 if (op & QIB_RCVCTRL_INTRAVAIL_DIS) 4538 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail)); 4539 /* 4540 * Decide which registers to write depending on the ops enabled. 4541 * Special case is "flush" (no bits set at all) 4542 * which needs to write both. 4543 */ 4544 if (op == 0 || (op & RCVCTRL_COMMON_MODS)) 4545 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); 4546 if (op == 0 || (op & RCVCTRL_PORT_MODS)) 4547 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); 4548 if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) { 4549 /* 4550 * Init the context registers also; if we were 4551 * disabled, tail and head should both be zero 4552 * already from the enable, but since we don't 4553 * know, we have to do it explicitly. 4554 */ 4555 val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); 4556 qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); 4557 4558 /* be sure enabling write seen; hd/tl should be 0 */ 4559 (void) qib_read_kreg32(dd, kr_scratch); 4560 val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); 4561 dd->rcd[ctxt]->head = val; 4562 /* If kctxt, interrupt on next receive. */ 4563 if (ctxt < dd->first_user_ctxt) 4564 val |= dd->rhdrhead_intr_off; 4565 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); 4566 } else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && 4567 dd->rcd[ctxt] && dd->rhdrhead_intr_off) { 4568 /* arm rcv interrupt */ 4569 val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off; 4570 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); 4571 } 4572 if (op & QIB_RCVCTRL_CTXT_DIS) { 4573 unsigned f; 4574 4575 /* Now that the context is disabled, clear these registers. */ 4576 if (ctxt >= 0) { 4577 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0); 4578 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0); 4579 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) 4580 qib_write_ureg(dd, ur_rcvflowtable + f, 4581 TIDFLOW_ERRBITS, ctxt); 4582 } else { 4583 unsigned i; 4584 4585 for (i = 0; i < dd->cfgctxts; i++) { 4586 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, 4587 i, 0); 4588 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0); 4589 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) 4590 qib_write_ureg(dd, ur_rcvflowtable + f, 4591 TIDFLOW_ERRBITS, i); 4592 } 4593 } 4594 } 4595 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 4596 } 4597 4598 /* 4599 * Modify the SENDCTRL register in chip-specific way. This 4600 * is a function where there are multiple such registers with 4601 * slightly different layouts. 4602 * The chip doesn't allow back-to-back sendctrl writes, so write 4603 * the scratch register after writing sendctrl. 4604 * 4605 * Which register is written depends on the operation. 4606 * Most operate on the common register, while 4607 * SEND_ENB and SEND_DIS operate on the per-port ones. 4608 * SEND_ENB is included in common because it can change SPCL_TRIG 4609 */ 4610 #define SENDCTRL_COMMON_MODS (\ 4611 QIB_SENDCTRL_CLEAR | \ 4612 QIB_SENDCTRL_AVAIL_DIS | \ 4613 QIB_SENDCTRL_AVAIL_ENB | \ 4614 QIB_SENDCTRL_AVAIL_BLIP | \ 4615 QIB_SENDCTRL_DISARM | \ 4616 QIB_SENDCTRL_DISARM_ALL | \ 4617 QIB_SENDCTRL_SEND_ENB) 4618 4619 #define SENDCTRL_PORT_MODS (\ 4620 QIB_SENDCTRL_CLEAR | \ 4621 QIB_SENDCTRL_SEND_ENB | \ 4622 QIB_SENDCTRL_SEND_DIS | \ 4623 QIB_SENDCTRL_FLUSH) 4624 4625 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op) 4626 { 4627 struct qib_devdata *dd = ppd->dd; 4628 u64 tmp_dd_sendctrl; 4629 unsigned long flags; 4630 4631 spin_lock_irqsave(&dd->sendctrl_lock, flags); 4632 4633 /* First the dd ones that are "sticky", saved in shadow */ 4634 if (op & QIB_SENDCTRL_CLEAR) 4635 dd->sendctrl = 0; 4636 if (op & QIB_SENDCTRL_AVAIL_DIS) 4637 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4638 else if (op & QIB_SENDCTRL_AVAIL_ENB) { 4639 dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd); 4640 if (dd->flags & QIB_USE_SPCL_TRIG) 4641 dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn); 4642 } 4643 4644 /* Then the ppd ones that are "sticky", saved in shadow */ 4645 if (op & QIB_SENDCTRL_SEND_DIS) 4646 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); 4647 else if (op & QIB_SENDCTRL_SEND_ENB) 4648 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); 4649 4650 if (op & QIB_SENDCTRL_DISARM_ALL) { 4651 u32 i, last; 4652 4653 tmp_dd_sendctrl = dd->sendctrl; 4654 last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 4655 /* 4656 * Disarm any buffers that are not yet launched, 4657 * disabling updates until done. 4658 */ 4659 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4660 for (i = 0; i < last; i++) { 4661 qib_write_kreg(dd, kr_sendctrl, 4662 tmp_dd_sendctrl | 4663 SYM_MASK(SendCtrl, Disarm) | i); 4664 qib_write_kreg(dd, kr_scratch, 0); 4665 } 4666 } 4667 4668 if (op & QIB_SENDCTRL_FLUSH) { 4669 u64 tmp_ppd_sendctrl = ppd->p_sendctrl; 4670 4671 /* 4672 * Now drain all the fifos. The Abort bit should never be 4673 * needed, so for now, at least, we don't use it. 4674 */ 4675 tmp_ppd_sendctrl |= 4676 SYM_MASK(SendCtrl_0, TxeDrainRmFifo) | 4677 SYM_MASK(SendCtrl_0, TxeDrainLaFifo) | 4678 SYM_MASK(SendCtrl_0, TxeBypassIbc); 4679 qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl); 4680 qib_write_kreg(dd, kr_scratch, 0); 4681 } 4682 4683 tmp_dd_sendctrl = dd->sendctrl; 4684 4685 if (op & QIB_SENDCTRL_DISARM) 4686 tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | 4687 ((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) << 4688 SYM_LSB(SendCtrl, DisarmSendBuf)); 4689 if ((op & QIB_SENDCTRL_AVAIL_BLIP) && 4690 (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd))) 4691 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4692 4693 if (op == 0 || (op & SENDCTRL_COMMON_MODS)) { 4694 qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); 4695 qib_write_kreg(dd, kr_scratch, 0); 4696 } 4697 4698 if (op == 0 || (op & SENDCTRL_PORT_MODS)) { 4699 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 4700 qib_write_kreg(dd, kr_scratch, 0); 4701 } 4702 4703 if (op & QIB_SENDCTRL_AVAIL_BLIP) { 4704 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); 4705 qib_write_kreg(dd, kr_scratch, 0); 4706 } 4707 4708 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 4709 4710 if (op & QIB_SENDCTRL_FLUSH) { 4711 u32 v; 4712 /* 4713 * ensure writes have hit chip, then do a few 4714 * more reads, to allow DMA of pioavail registers 4715 * to occur, so in-memory copy is in sync with 4716 * the chip. Not always safe to sleep. 4717 */ 4718 v = qib_read_kreg32(dd, kr_scratch); 4719 qib_write_kreg(dd, kr_scratch, v); 4720 v = qib_read_kreg32(dd, kr_scratch); 4721 qib_write_kreg(dd, kr_scratch, v); 4722 qib_read_kreg32(dd, kr_scratch); 4723 } 4724 } 4725 4726 #define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */ 4727 #define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */ 4728 #define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */ 4729 4730 /** 4731 * qib_portcntr_7322 - read a per-port chip counter 4732 * @ppd: the qlogic_ib pport 4733 * @creg: the counter to read (not a chip offset) 4734 */ 4735 static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg) 4736 { 4737 struct qib_devdata *dd = ppd->dd; 4738 u64 ret = 0ULL; 4739 u16 creg; 4740 /* 0xffff for unimplemented or synthesized counters */ 4741 static const u32 xlator[] = { 4742 [QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG, 4743 [QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG, 4744 [QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount, 4745 [QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount, 4746 [QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount, 4747 [QIBPORTCNTR_SENDSTALL] = crp_sendstall, 4748 [QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG, 4749 [QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount, 4750 [QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount, 4751 [QIBPORTCNTR_RCVEBP] = crp_rcvebp, 4752 [QIBPORTCNTR_RCVOVFL] = crp_rcvovfl, 4753 [QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG, 4754 [QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed for 7322 */ 4755 [QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr, 4756 [QIBPORTCNTR_RXVLERR] = crp_rxvlerr, 4757 [QIBPORTCNTR_ERRICRC] = crp_erricrc, 4758 [QIBPORTCNTR_ERRVCRC] = crp_errvcrc, 4759 [QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc, 4760 [QIBPORTCNTR_BADFORMAT] = crp_badformat, 4761 [QIBPORTCNTR_ERR_RLEN] = crp_err_rlen, 4762 [QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr, 4763 [QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen, 4764 [QIBPORTCNTR_UNSUPVL] = crp_txunsupvl, 4765 [QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl, 4766 [QIBPORTCNTR_ERRLINK] = crp_errlink, 4767 [QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown, 4768 [QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov, 4769 [QIBPORTCNTR_LLI] = crp_locallinkintegrityerr, 4770 [QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt, 4771 [QIBPORTCNTR_ERRPKEY] = crp_errpkey, 4772 /* 4773 * the next 3 aren't really counters, but were implemented 4774 * as counters in older chips, so still get accessed as 4775 * though they were counters from this code. 4776 */ 4777 [QIBPORTCNTR_PSINTERVAL] = krp_psinterval, 4778 [QIBPORTCNTR_PSSTART] = krp_psstart, 4779 [QIBPORTCNTR_PSSTAT] = krp_psstat, 4780 /* pseudo-counter, summed for all ports */ 4781 [QIBPORTCNTR_KHDROVFL] = 0xffff, 4782 }; 4783 4784 if (reg >= ARRAY_SIZE(xlator)) { 4785 qib_devinfo(ppd->dd->pcidev, 4786 "Unimplemented portcounter %u\n", reg); 4787 goto done; 4788 } 4789 creg = xlator[reg] & _PORT_CNTR_IDXMASK; 4790 4791 /* handle non-counters and special cases first */ 4792 if (reg == QIBPORTCNTR_KHDROVFL) { 4793 int i; 4794 4795 /* sum over all kernel contexts (skip if mini_init) */ 4796 for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) { 4797 struct qib_ctxtdata *rcd = dd->rcd[i]; 4798 4799 if (!rcd || rcd->ppd != ppd) 4800 continue; 4801 ret += read_7322_creg32(dd, cr_base_egrovfl + i); 4802 } 4803 goto done; 4804 } else if (reg == QIBPORTCNTR_RXDROPPKT) { 4805 /* 4806 * Used as part of the synthesis of port_rcv_errors 4807 * in the verbs code for IBTA counters. Not needed for 7322, 4808 * because all the errors are already counted by other cntrs. 4809 */ 4810 goto done; 4811 } else if (reg == QIBPORTCNTR_PSINTERVAL || 4812 reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) { 4813 /* were counters in older chips, now per-port kernel regs */ 4814 ret = qib_read_kreg_port(ppd, creg); 4815 goto done; 4816 } 4817 4818 /* 4819 * Only fast increment counters are 64 bits; use 32 bit reads to 4820 * avoid two independent reads when on Opteron. 4821 */ 4822 if (xlator[reg] & _PORT_64BIT_FLAG) 4823 ret = read_7322_creg_port(ppd, creg); 4824 else 4825 ret = read_7322_creg32_port(ppd, creg); 4826 if (creg == crp_ibsymbolerr) { 4827 if (ppd->cpspec->ibdeltainprog) 4828 ret -= ret - ppd->cpspec->ibsymsnap; 4829 ret -= ppd->cpspec->ibsymdelta; 4830 } else if (creg == crp_iblinkerrrecov) { 4831 if (ppd->cpspec->ibdeltainprog) 4832 ret -= ret - ppd->cpspec->iblnkerrsnap; 4833 ret -= ppd->cpspec->iblnkerrdelta; 4834 } else if (creg == crp_errlink) 4835 ret -= ppd->cpspec->ibmalfdelta; 4836 else if (creg == crp_iblinkdown) 4837 ret += ppd->cpspec->iblnkdowndelta; 4838 done: 4839 return ret; 4840 } 4841 4842 /* 4843 * Device counter names (not port-specific), one line per stat, 4844 * single string. Used by utilities like ipathstats to print the stats 4845 * in a way which works for different versions of drivers, without changing 4846 * the utility. Names need to be 12 chars or less (w/o newline), for proper 4847 * display by utility. 4848 * Non-error counters are first. 4849 * Start of "error" conters is indicated by a leading "E " on the first 4850 * "error" counter, and doesn't count in label length. 4851 * The EgrOvfl list needs to be last so we truncate them at the configured 4852 * context count for the device. 4853 * cntr7322indices contains the corresponding register indices. 4854 */ 4855 static const char cntr7322names[] = 4856 "Interrupts\n" 4857 "HostBusStall\n" 4858 "E RxTIDFull\n" 4859 "RxTIDInvalid\n" 4860 "RxTIDFloDrop\n" /* 7322 only */ 4861 "Ctxt0EgrOvfl\n" 4862 "Ctxt1EgrOvfl\n" 4863 "Ctxt2EgrOvfl\n" 4864 "Ctxt3EgrOvfl\n" 4865 "Ctxt4EgrOvfl\n" 4866 "Ctxt5EgrOvfl\n" 4867 "Ctxt6EgrOvfl\n" 4868 "Ctxt7EgrOvfl\n" 4869 "Ctxt8EgrOvfl\n" 4870 "Ctxt9EgrOvfl\n" 4871 "Ctx10EgrOvfl\n" 4872 "Ctx11EgrOvfl\n" 4873 "Ctx12EgrOvfl\n" 4874 "Ctx13EgrOvfl\n" 4875 "Ctx14EgrOvfl\n" 4876 "Ctx15EgrOvfl\n" 4877 "Ctx16EgrOvfl\n" 4878 "Ctx17EgrOvfl\n" 4879 ; 4880 4881 static const u32 cntr7322indices[] = { 4882 cr_lbint | _PORT_64BIT_FLAG, 4883 cr_lbstall | _PORT_64BIT_FLAG, 4884 cr_tidfull, 4885 cr_tidinvalid, 4886 cr_rxtidflowdrop, 4887 cr_base_egrovfl + 0, 4888 cr_base_egrovfl + 1, 4889 cr_base_egrovfl + 2, 4890 cr_base_egrovfl + 3, 4891 cr_base_egrovfl + 4, 4892 cr_base_egrovfl + 5, 4893 cr_base_egrovfl + 6, 4894 cr_base_egrovfl + 7, 4895 cr_base_egrovfl + 8, 4896 cr_base_egrovfl + 9, 4897 cr_base_egrovfl + 10, 4898 cr_base_egrovfl + 11, 4899 cr_base_egrovfl + 12, 4900 cr_base_egrovfl + 13, 4901 cr_base_egrovfl + 14, 4902 cr_base_egrovfl + 15, 4903 cr_base_egrovfl + 16, 4904 cr_base_egrovfl + 17, 4905 }; 4906 4907 /* 4908 * same as cntr7322names and cntr7322indices, but for port-specific counters. 4909 * portcntr7322indices is somewhat complicated by some registers needing 4910 * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG 4911 */ 4912 static const char portcntr7322names[] = 4913 "TxPkt\n" 4914 "TxFlowPkt\n" 4915 "TxWords\n" 4916 "RxPkt\n" 4917 "RxFlowPkt\n" 4918 "RxWords\n" 4919 "TxFlowStall\n" 4920 "TxDmaDesc\n" /* 7220 and 7322-only */ 4921 "E RxDlidFltr\n" /* 7220 and 7322-only */ 4922 "IBStatusChng\n" 4923 "IBLinkDown\n" 4924 "IBLnkRecov\n" 4925 "IBRxLinkErr\n" 4926 "IBSymbolErr\n" 4927 "RxLLIErr\n" 4928 "RxBadFormat\n" 4929 "RxBadLen\n" 4930 "RxBufOvrfl\n" 4931 "RxEBP\n" 4932 "RxFlowCtlErr\n" 4933 "RxICRCerr\n" 4934 "RxLPCRCerr\n" 4935 "RxVCRCerr\n" 4936 "RxInvalLen\n" 4937 "RxInvalPKey\n" 4938 "RxPktDropped\n" 4939 "TxBadLength\n" 4940 "TxDropped\n" 4941 "TxInvalLen\n" 4942 "TxUnderrun\n" 4943 "TxUnsupVL\n" 4944 "RxLclPhyErr\n" /* 7220 and 7322-only from here down */ 4945 "RxVL15Drop\n" 4946 "RxVlErr\n" 4947 "XcessBufOvfl\n" 4948 "RxQPBadCtxt\n" /* 7322-only from here down */ 4949 "TXBadHeader\n" 4950 ; 4951 4952 static const u32 portcntr7322indices[] = { 4953 QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, 4954 crp_pktsendflow, 4955 QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, 4956 QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, 4957 crp_pktrcvflowctrl, 4958 QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, 4959 QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, 4960 crp_txsdmadesc | _PORT_64BIT_FLAG, 4961 crp_rxdlidfltr, 4962 crp_ibstatuschange, 4963 QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, 4964 QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, 4965 QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, 4966 QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, 4967 QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, 4968 QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, 4969 QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, 4970 QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, 4971 QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, 4972 crp_rcvflowctrlviol, 4973 QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, 4974 QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, 4975 QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, 4976 QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, 4977 QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, 4978 QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, 4979 crp_txminmaxlenerr, 4980 crp_txdroppedpkt, 4981 crp_txlenerr, 4982 crp_txunderrun, 4983 crp_txunsupvl, 4984 QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG, 4985 QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG, 4986 QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG, 4987 QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG, 4988 crp_rxqpinvalidctxt, 4989 crp_txhdrerr, 4990 }; 4991 4992 /* do all the setup to make the counter reads efficient later */ 4993 static void init_7322_cntrnames(struct qib_devdata *dd) 4994 { 4995 int i, j = 0; 4996 char *s; 4997 4998 for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts; 4999 i++) { 5000 /* we always have at least one counter before the egrovfl */ 5001 if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) 5002 j = 1; 5003 s = strchr(s + 1, '\n'); 5004 if (s && j) 5005 j++; 5006 } 5007 dd->cspec->ncntrs = i; 5008 if (!s) 5009 /* full list; size is without terminating null */ 5010 dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1; 5011 else 5012 dd->cspec->cntrnamelen = 1 + s - cntr7322names; 5013 dd->cspec->cntrs = kmalloc_array(dd->cspec->ncntrs, sizeof(u64), 5014 GFP_KERNEL); 5015 5016 for (i = 0, s = (char *)portcntr7322names; s; i++) 5017 s = strchr(s + 1, '\n'); 5018 dd->cspec->nportcntrs = i - 1; 5019 dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1; 5020 for (i = 0; i < dd->num_pports; ++i) { 5021 dd->pport[i].cpspec->portcntrs = 5022 kmalloc_array(dd->cspec->nportcntrs, sizeof(u64), 5023 GFP_KERNEL); 5024 } 5025 } 5026 5027 static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep, 5028 u64 **cntrp) 5029 { 5030 u32 ret; 5031 5032 if (namep) { 5033 ret = dd->cspec->cntrnamelen; 5034 if (pos >= ret) 5035 ret = 0; /* final read after getting everything */ 5036 else 5037 *namep = (char *) cntr7322names; 5038 } else { 5039 u64 *cntr = dd->cspec->cntrs; 5040 int i; 5041 5042 ret = dd->cspec->ncntrs * sizeof(u64); 5043 if (!cntr || pos >= ret) { 5044 /* everything read, or couldn't get memory */ 5045 ret = 0; 5046 goto done; 5047 } 5048 *cntrp = cntr; 5049 for (i = 0; i < dd->cspec->ncntrs; i++) 5050 if (cntr7322indices[i] & _PORT_64BIT_FLAG) 5051 *cntr++ = read_7322_creg(dd, 5052 cntr7322indices[i] & 5053 _PORT_CNTR_IDXMASK); 5054 else 5055 *cntr++ = read_7322_creg32(dd, 5056 cntr7322indices[i]); 5057 } 5058 done: 5059 return ret; 5060 } 5061 5062 static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, 5063 char **namep, u64 **cntrp) 5064 { 5065 u32 ret; 5066 5067 if (namep) { 5068 ret = dd->cspec->portcntrnamelen; 5069 if (pos >= ret) 5070 ret = 0; /* final read after getting everything */ 5071 else 5072 *namep = (char *)portcntr7322names; 5073 } else { 5074 struct qib_pportdata *ppd = &dd->pport[port]; 5075 u64 *cntr = ppd->cpspec->portcntrs; 5076 int i; 5077 5078 ret = dd->cspec->nportcntrs * sizeof(u64); 5079 if (!cntr || pos >= ret) { 5080 /* everything read, or couldn't get memory */ 5081 ret = 0; 5082 goto done; 5083 } 5084 *cntrp = cntr; 5085 for (i = 0; i < dd->cspec->nportcntrs; i++) { 5086 if (portcntr7322indices[i] & _PORT_VIRT_FLAG) 5087 *cntr++ = qib_portcntr_7322(ppd, 5088 portcntr7322indices[i] & 5089 _PORT_CNTR_IDXMASK); 5090 else if (portcntr7322indices[i] & _PORT_64BIT_FLAG) 5091 *cntr++ = read_7322_creg_port(ppd, 5092 portcntr7322indices[i] & 5093 _PORT_CNTR_IDXMASK); 5094 else 5095 *cntr++ = read_7322_creg32_port(ppd, 5096 portcntr7322indices[i]); 5097 } 5098 } 5099 done: 5100 return ret; 5101 } 5102 5103 /** 5104 * qib_get_7322_faststats - get word counters from chip before they overflow 5105 * @opaque - contains a pointer to the qlogic_ib device qib_devdata 5106 * 5107 * VESTIGIAL IBA7322 has no "small fast counters", so the only 5108 * real purpose of this function is to maintain the notion of 5109 * "active time", which in turn is only logged into the eeprom, 5110 * which we don;t have, yet, for 7322-based boards. 5111 * 5112 * called from add_timer 5113 */ 5114 static void qib_get_7322_faststats(struct timer_list *t) 5115 { 5116 struct qib_devdata *dd = from_timer(dd, t, stats_timer); 5117 struct qib_pportdata *ppd; 5118 unsigned long flags; 5119 u64 traffic_wds; 5120 int pidx; 5121 5122 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 5123 ppd = dd->pport + pidx; 5124 5125 /* 5126 * If port isn't enabled or not operational ports, or 5127 * diags is running (can cause memory diags to fail) 5128 * skip this port this time. 5129 */ 5130 if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED) 5131 || dd->diag_client) 5132 continue; 5133 5134 /* 5135 * Maintain an activity timer, based on traffic 5136 * exceeding a threshold, so we need to check the word-counts 5137 * even if they are 64-bit. 5138 */ 5139 traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) + 5140 qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND); 5141 spin_lock_irqsave(&ppd->dd->eep_st_lock, flags); 5142 traffic_wds -= ppd->dd->traffic_wds; 5143 ppd->dd->traffic_wds += traffic_wds; 5144 spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags); 5145 if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active & 5146 QIB_IB_QDR) && 5147 (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | 5148 QIBL_LINKACTIVE)) && 5149 ppd->cpspec->qdr_dfe_time && 5150 time_is_before_jiffies(ppd->cpspec->qdr_dfe_time)) { 5151 ppd->cpspec->qdr_dfe_on = 0; 5152 5153 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 5154 ppd->dd->cspec->r1 ? 5155 QDR_STATIC_ADAPT_INIT_R1 : 5156 QDR_STATIC_ADAPT_INIT); 5157 force_h1(ppd); 5158 } 5159 } 5160 mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); 5161 } 5162 5163 /* 5164 * If we were using MSIx, try to fallback to INTx. 5165 */ 5166 static int qib_7322_intr_fallback(struct qib_devdata *dd) 5167 { 5168 if (!dd->cspec->num_msix_entries) 5169 return 0; /* already using INTx */ 5170 5171 qib_devinfo(dd->pcidev, 5172 "MSIx interrupt not detected, trying INTx interrupts\n"); 5173 qib_7322_free_irq(dd); 5174 if (pci_alloc_irq_vectors(dd->pcidev, 1, 1, PCI_IRQ_LEGACY) < 0) 5175 qib_dev_err(dd, "Failed to enable INTx\n"); 5176 qib_setup_7322_interrupt(dd, 0); 5177 return 1; 5178 } 5179 5180 /* 5181 * Reset the XGXS (between serdes and IBC). Slightly less intrusive 5182 * than resetting the IBC or external link state, and useful in some 5183 * cases to cause some retraining. To do this right, we reset IBC 5184 * as well, then return to previous state (which may be still in reset) 5185 * NOTE: some callers of this "know" this writes the current value 5186 * of cpspec->ibcctrl_a as part of it's operation, so if that changes, 5187 * check all callers. 5188 */ 5189 static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd) 5190 { 5191 u64 val; 5192 struct qib_devdata *dd = ppd->dd; 5193 const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) | 5194 SYM_MASK(IBPCSConfig_0, xcv_treset) | 5195 SYM_MASK(IBPCSConfig_0, tx_rx_reset); 5196 5197 val = qib_read_kreg_port(ppd, krp_ib_pcsconfig); 5198 qib_write_kreg(dd, kr_hwerrmask, 5199 dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop)); 5200 qib_write_kreg_port(ppd, krp_ibcctrl_a, 5201 ppd->cpspec->ibcctrl_a & 5202 ~SYM_MASK(IBCCtrlA_0, IBLinkEn)); 5203 5204 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits); 5205 qib_read_kreg32(dd, kr_scratch); 5206 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits); 5207 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 5208 qib_write_kreg(dd, kr_scratch, 0ULL); 5209 qib_write_kreg(dd, kr_hwerrclear, 5210 SYM_MASK(HwErrClear, statusValidNoEopClear)); 5211 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 5212 } 5213 5214 /* 5215 * This code for non-IBTA-compliant IB speed negotiation is only known to 5216 * work for the SDR to DDR transition, and only between an HCA and a switch 5217 * with recent firmware. It is based on observed heuristics, rather than 5218 * actual knowledge of the non-compliant speed negotiation. 5219 * It has a number of hard-coded fields, since the hope is to rewrite this 5220 * when a spec is available on how the negoation is intended to work. 5221 */ 5222 static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr, 5223 u32 dcnt, u32 *data) 5224 { 5225 int i; 5226 u64 pbc; 5227 u32 __iomem *piobuf; 5228 u32 pnum, control, len; 5229 struct qib_devdata *dd = ppd->dd; 5230 5231 i = 0; 5232 len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */ 5233 control = qib_7322_setpbc_control(ppd, len, 0, 15); 5234 pbc = ((u64) control << 32) | len; 5235 while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) { 5236 if (i++ > 15) 5237 return; 5238 udelay(2); 5239 } 5240 /* disable header check on this packet, since it can't be valid */ 5241 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL); 5242 writeq(pbc, piobuf); 5243 qib_flush_wc(); 5244 qib_pio_copy(piobuf + 2, hdr, 7); 5245 qib_pio_copy(piobuf + 9, data, dcnt); 5246 if (dd->flags & QIB_USE_SPCL_TRIG) { 5247 u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023; 5248 5249 qib_flush_wc(); 5250 __raw_writel(0xaebecede, piobuf + spcl_off); 5251 } 5252 qib_flush_wc(); 5253 qib_sendbuf_done(dd, pnum); 5254 /* and re-enable hdr check */ 5255 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL); 5256 } 5257 5258 /* 5259 * _start packet gets sent twice at start, _done gets sent twice at end 5260 */ 5261 static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which) 5262 { 5263 struct qib_devdata *dd = ppd->dd; 5264 static u32 swapped; 5265 u32 dw, i, hcnt, dcnt, *data; 5266 static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba }; 5267 static u32 madpayload_start[0x40] = { 5268 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 5269 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 5270 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */ 5271 }; 5272 static u32 madpayload_done[0x40] = { 5273 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 5274 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 5275 0x40000001, 0x1388, 0x15e, /* rest 0's */ 5276 }; 5277 5278 dcnt = ARRAY_SIZE(madpayload_start); 5279 hcnt = ARRAY_SIZE(hdr); 5280 if (!swapped) { 5281 /* for maintainability, do it at runtime */ 5282 for (i = 0; i < hcnt; i++) { 5283 dw = (__force u32) cpu_to_be32(hdr[i]); 5284 hdr[i] = dw; 5285 } 5286 for (i = 0; i < dcnt; i++) { 5287 dw = (__force u32) cpu_to_be32(madpayload_start[i]); 5288 madpayload_start[i] = dw; 5289 dw = (__force u32) cpu_to_be32(madpayload_done[i]); 5290 madpayload_done[i] = dw; 5291 } 5292 swapped = 1; 5293 } 5294 5295 data = which ? madpayload_done : madpayload_start; 5296 5297 autoneg_7322_sendpkt(ppd, hdr, dcnt, data); 5298 qib_read_kreg64(dd, kr_scratch); 5299 udelay(2); 5300 autoneg_7322_sendpkt(ppd, hdr, dcnt, data); 5301 qib_read_kreg64(dd, kr_scratch); 5302 udelay(2); 5303 } 5304 5305 /* 5306 * Do the absolute minimum to cause an IB speed change, and make it 5307 * ready, but don't actually trigger the change. The caller will 5308 * do that when ready (if link is in Polling training state, it will 5309 * happen immediately, otherwise when link next goes down) 5310 * 5311 * This routine should only be used as part of the DDR autonegotation 5312 * code for devices that are not compliant with IB 1.2 (or code that 5313 * fixes things up for same). 5314 * 5315 * When link has gone down, and autoneg enabled, or autoneg has 5316 * failed and we give up until next time we set both speeds, and 5317 * then we want IBTA enabled as well as "use max enabled speed. 5318 */ 5319 static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed) 5320 { 5321 u64 newctrlb; 5322 5323 newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK | 5324 IBA7322_IBC_IBTA_1_2_MASK | 5325 IBA7322_IBC_MAX_SPEED_MASK); 5326 5327 if (speed & (speed - 1)) /* multiple speeds */ 5328 newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) | 5329 IBA7322_IBC_IBTA_1_2_MASK | 5330 IBA7322_IBC_MAX_SPEED_MASK; 5331 else 5332 newctrlb |= speed == QIB_IB_QDR ? 5333 IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK : 5334 ((speed == QIB_IB_DDR ? 5335 IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR)); 5336 5337 if (newctrlb == ppd->cpspec->ibcctrl_b) 5338 return; 5339 5340 ppd->cpspec->ibcctrl_b = newctrlb; 5341 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 5342 qib_write_kreg(ppd->dd, kr_scratch, 0); 5343 } 5344 5345 /* 5346 * This routine is only used when we are not talking to another 5347 * IB 1.2-compliant device that we think can do DDR. 5348 * (This includes all existing switch chips as of Oct 2007.) 5349 * 1.2-compliant devices go directly to DDR prior to reaching INIT 5350 */ 5351 static void try_7322_autoneg(struct qib_pportdata *ppd) 5352 { 5353 unsigned long flags; 5354 5355 spin_lock_irqsave(&ppd->lflags_lock, flags); 5356 ppd->lflags |= QIBL_IB_AUTONEG_INPROG; 5357 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5358 qib_autoneg_7322_send(ppd, 0); 5359 set_7322_ibspeed_fast(ppd, QIB_IB_DDR); 5360 qib_7322_mini_pcs_reset(ppd); 5361 /* 2 msec is minimum length of a poll cycle */ 5362 queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work, 5363 msecs_to_jiffies(2)); 5364 } 5365 5366 /* 5367 * Handle the empirically determined mechanism for auto-negotiation 5368 * of DDR speed with switches. 5369 */ 5370 static void autoneg_7322_work(struct work_struct *work) 5371 { 5372 struct qib_pportdata *ppd; 5373 u32 i; 5374 unsigned long flags; 5375 5376 ppd = container_of(work, struct qib_chippport_specific, 5377 autoneg_work.work)->ppd; 5378 5379 /* 5380 * Busy wait for this first part, it should be at most a 5381 * few hundred usec, since we scheduled ourselves for 2msec. 5382 */ 5383 for (i = 0; i < 25; i++) { 5384 if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState) 5385 == IB_7322_LT_STATE_POLLQUIET) { 5386 qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE); 5387 break; 5388 } 5389 udelay(100); 5390 } 5391 5392 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) 5393 goto done; /* we got there early or told to stop */ 5394 5395 /* we expect this to timeout */ 5396 if (wait_event_timeout(ppd->cpspec->autoneg_wait, 5397 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5398 msecs_to_jiffies(90))) 5399 goto done; 5400 qib_7322_mini_pcs_reset(ppd); 5401 5402 /* we expect this to timeout */ 5403 if (wait_event_timeout(ppd->cpspec->autoneg_wait, 5404 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5405 msecs_to_jiffies(1700))) 5406 goto done; 5407 qib_7322_mini_pcs_reset(ppd); 5408 5409 set_7322_ibspeed_fast(ppd, QIB_IB_SDR); 5410 5411 /* 5412 * Wait up to 250 msec for link to train and get to INIT at DDR; 5413 * this should terminate early. 5414 */ 5415 wait_event_timeout(ppd->cpspec->autoneg_wait, 5416 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5417 msecs_to_jiffies(250)); 5418 done: 5419 if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) { 5420 spin_lock_irqsave(&ppd->lflags_lock, flags); 5421 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; 5422 if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) { 5423 ppd->lflags |= QIBL_IB_AUTONEG_FAILED; 5424 ppd->cpspec->autoneg_tries = 0; 5425 } 5426 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5427 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5428 } 5429 } 5430 5431 /* 5432 * This routine is used to request IPG set in the QLogic switch. 5433 * Only called if r1. 5434 */ 5435 static void try_7322_ipg(struct qib_pportdata *ppd) 5436 { 5437 struct qib_ibport *ibp = &ppd->ibport_data; 5438 struct ib_mad_send_buf *send_buf; 5439 struct ib_mad_agent *agent; 5440 struct ib_smp *smp; 5441 unsigned delay; 5442 int ret; 5443 5444 agent = ibp->rvp.send_agent; 5445 if (!agent) 5446 goto retry; 5447 5448 send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR, 5449 IB_MGMT_MAD_DATA, GFP_ATOMIC, 5450 IB_MGMT_BASE_VERSION); 5451 if (IS_ERR(send_buf)) 5452 goto retry; 5453 5454 if (!ibp->smi_ah) { 5455 struct ib_ah *ah; 5456 5457 ah = qib_create_qp0_ah(ibp, be16_to_cpu(IB_LID_PERMISSIVE)); 5458 if (IS_ERR(ah)) 5459 ret = PTR_ERR(ah); 5460 else { 5461 send_buf->ah = ah; 5462 ibp->smi_ah = ibah_to_rvtah(ah); 5463 ret = 0; 5464 } 5465 } else { 5466 send_buf->ah = &ibp->smi_ah->ibah; 5467 ret = 0; 5468 } 5469 5470 smp = send_buf->mad; 5471 smp->base_version = IB_MGMT_BASE_VERSION; 5472 smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE; 5473 smp->class_version = 1; 5474 smp->method = IB_MGMT_METHOD_SEND; 5475 smp->hop_cnt = 1; 5476 smp->attr_id = QIB_VENDOR_IPG; 5477 smp->attr_mod = 0; 5478 5479 if (!ret) 5480 ret = ib_post_send_mad(send_buf, NULL); 5481 if (ret) 5482 ib_free_send_mad(send_buf); 5483 retry: 5484 delay = 2 << ppd->cpspec->ipg_tries; 5485 queue_delayed_work(ib_wq, &ppd->cpspec->ipg_work, 5486 msecs_to_jiffies(delay)); 5487 } 5488 5489 /* 5490 * Timeout handler for setting IPG. 5491 * Only called if r1. 5492 */ 5493 static void ipg_7322_work(struct work_struct *work) 5494 { 5495 struct qib_pportdata *ppd; 5496 5497 ppd = container_of(work, struct qib_chippport_specific, 5498 ipg_work.work)->ppd; 5499 if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE)) 5500 && ++ppd->cpspec->ipg_tries <= 10) 5501 try_7322_ipg(ppd); 5502 } 5503 5504 static u32 qib_7322_iblink_state(u64 ibcs) 5505 { 5506 u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState); 5507 5508 switch (state) { 5509 case IB_7322_L_STATE_INIT: 5510 state = IB_PORT_INIT; 5511 break; 5512 case IB_7322_L_STATE_ARM: 5513 state = IB_PORT_ARMED; 5514 break; 5515 case IB_7322_L_STATE_ACTIVE: 5516 /* fall through */ 5517 case IB_7322_L_STATE_ACT_DEFER: 5518 state = IB_PORT_ACTIVE; 5519 break; 5520 default: /* fall through */ 5521 case IB_7322_L_STATE_DOWN: 5522 state = IB_PORT_DOWN; 5523 break; 5524 } 5525 return state; 5526 } 5527 5528 /* returns the IBTA port state, rather than the IBC link training state */ 5529 static u8 qib_7322_phys_portstate(u64 ibcs) 5530 { 5531 u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState); 5532 return qib_7322_physportstate[state]; 5533 } 5534 5535 static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) 5536 { 5537 int ret = 0, symadj = 0; 5538 unsigned long flags; 5539 int mult; 5540 5541 spin_lock_irqsave(&ppd->lflags_lock, flags); 5542 ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; 5543 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5544 5545 /* Update our picture of width and speed from chip */ 5546 if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) { 5547 ppd->link_speed_active = QIB_IB_QDR; 5548 mult = 4; 5549 } else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) { 5550 ppd->link_speed_active = QIB_IB_DDR; 5551 mult = 2; 5552 } else { 5553 ppd->link_speed_active = QIB_IB_SDR; 5554 mult = 1; 5555 } 5556 if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) { 5557 ppd->link_width_active = IB_WIDTH_4X; 5558 mult *= 4; 5559 } else 5560 ppd->link_width_active = IB_WIDTH_1X; 5561 ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)]; 5562 5563 if (!ibup) { 5564 u64 clr; 5565 5566 /* Link went down. */ 5567 /* do IPG MAD again after linkdown, even if last time failed */ 5568 ppd->cpspec->ipg_tries = 0; 5569 clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) & 5570 (SYM_MASK(IBCStatusB_0, heartbeat_timed_out) | 5571 SYM_MASK(IBCStatusB_0, heartbeat_crosstalk)); 5572 if (clr) 5573 qib_write_kreg_port(ppd, krp_ibcstatus_b, clr); 5574 if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | 5575 QIBL_IB_AUTONEG_INPROG))) 5576 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5577 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5578 struct qib_qsfp_data *qd = 5579 &ppd->cpspec->qsfp_data; 5580 /* unlock the Tx settings, speed may change */ 5581 qib_write_kreg_port(ppd, krp_tx_deemph_override, 5582 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 5583 reset_tx_deemphasis_override)); 5584 qib_cancel_sends(ppd); 5585 /* on link down, ensure sane pcs state */ 5586 qib_7322_mini_pcs_reset(ppd); 5587 /* schedule the qsfp refresh which should turn the link 5588 off */ 5589 if (ppd->dd->flags & QIB_HAS_QSFP) { 5590 qd->t_insert = jiffies; 5591 queue_work(ib_wq, &qd->work); 5592 } 5593 spin_lock_irqsave(&ppd->sdma_lock, flags); 5594 if (__qib_sdma_running(ppd)) 5595 __qib_sdma_process_event(ppd, 5596 qib_sdma_event_e70_go_idle); 5597 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 5598 } 5599 clr = read_7322_creg32_port(ppd, crp_iblinkdown); 5600 if (clr == ppd->cpspec->iblnkdownsnap) 5601 ppd->cpspec->iblnkdowndelta++; 5602 } else { 5603 if (qib_compat_ddr_negotiate && 5604 !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | 5605 QIBL_IB_AUTONEG_INPROG)) && 5606 ppd->link_speed_active == QIB_IB_SDR && 5607 (ppd->link_speed_enabled & QIB_IB_DDR) 5608 && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) { 5609 /* we are SDR, and auto-negotiation enabled */ 5610 ++ppd->cpspec->autoneg_tries; 5611 if (!ppd->cpspec->ibdeltainprog) { 5612 ppd->cpspec->ibdeltainprog = 1; 5613 ppd->cpspec->ibsymdelta += 5614 read_7322_creg32_port(ppd, 5615 crp_ibsymbolerr) - 5616 ppd->cpspec->ibsymsnap; 5617 ppd->cpspec->iblnkerrdelta += 5618 read_7322_creg32_port(ppd, 5619 crp_iblinkerrrecov) - 5620 ppd->cpspec->iblnkerrsnap; 5621 } 5622 try_7322_autoneg(ppd); 5623 ret = 1; /* no other IB status change processing */ 5624 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && 5625 ppd->link_speed_active == QIB_IB_SDR) { 5626 qib_autoneg_7322_send(ppd, 1); 5627 set_7322_ibspeed_fast(ppd, QIB_IB_DDR); 5628 qib_7322_mini_pcs_reset(ppd); 5629 udelay(2); 5630 ret = 1; /* no other IB status change processing */ 5631 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && 5632 (ppd->link_speed_active & QIB_IB_DDR)) { 5633 spin_lock_irqsave(&ppd->lflags_lock, flags); 5634 ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG | 5635 QIBL_IB_AUTONEG_FAILED); 5636 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5637 ppd->cpspec->autoneg_tries = 0; 5638 /* re-enable SDR, for next link down */ 5639 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5640 wake_up(&ppd->cpspec->autoneg_wait); 5641 symadj = 1; 5642 } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) { 5643 /* 5644 * Clear autoneg failure flag, and do setup 5645 * so we'll try next time link goes down and 5646 * back to INIT (possibly connected to a 5647 * different device). 5648 */ 5649 spin_lock_irqsave(&ppd->lflags_lock, flags); 5650 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 5651 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5652 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK; 5653 symadj = 1; 5654 } 5655 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5656 symadj = 1; 5657 if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10) 5658 try_7322_ipg(ppd); 5659 if (!ppd->cpspec->recovery_init) 5660 setup_7322_link_recovery(ppd, 0); 5661 ppd->cpspec->qdr_dfe_time = jiffies + 5662 msecs_to_jiffies(QDR_DFE_DISABLE_DELAY); 5663 } 5664 ppd->cpspec->ibmalfusesnap = 0; 5665 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, 5666 crp_errlink); 5667 } 5668 if (symadj) { 5669 ppd->cpspec->iblnkdownsnap = 5670 read_7322_creg32_port(ppd, crp_iblinkdown); 5671 if (ppd->cpspec->ibdeltainprog) { 5672 ppd->cpspec->ibdeltainprog = 0; 5673 ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd, 5674 crp_ibsymbolerr) - ppd->cpspec->ibsymsnap; 5675 ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd, 5676 crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap; 5677 } 5678 } else if (!ibup && qib_compat_ddr_negotiate && 5679 !ppd->cpspec->ibdeltainprog && 5680 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5681 ppd->cpspec->ibdeltainprog = 1; 5682 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, 5683 crp_ibsymbolerr); 5684 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, 5685 crp_iblinkerrrecov); 5686 } 5687 5688 if (!ret) 5689 qib_setup_7322_setextled(ppd, ibup); 5690 return ret; 5691 } 5692 5693 /* 5694 * Does read/modify/write to appropriate registers to 5695 * set output and direction bits selected by mask. 5696 * these are in their canonical postions (e.g. lsb of 5697 * dir will end up in D48 of extctrl on existing chips). 5698 * returns contents of GP Inputs. 5699 */ 5700 static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) 5701 { 5702 u64 read_val, new_out; 5703 unsigned long flags; 5704 5705 if (mask) { 5706 /* some bits being written, lock access to GPIO */ 5707 dir &= mask; 5708 out &= mask; 5709 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 5710 dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); 5711 dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); 5712 new_out = (dd->cspec->gpio_out & ~mask) | out; 5713 5714 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 5715 qib_write_kreg(dd, kr_gpio_out, new_out); 5716 dd->cspec->gpio_out = new_out; 5717 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 5718 } 5719 /* 5720 * It is unlikely that a read at this time would get valid 5721 * data on a pin whose direction line was set in the same 5722 * call to this function. We include the read here because 5723 * that allows us to potentially combine a change on one pin with 5724 * a read on another, and because the old code did something like 5725 * this. 5726 */ 5727 read_val = qib_read_kreg64(dd, kr_extstatus); 5728 return SYM_FIELD(read_val, EXTStatus, GPIOIn); 5729 } 5730 5731 /* Enable writes to config EEPROM, if possible. Returns previous state */ 5732 static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen) 5733 { 5734 int prev_wen; 5735 u32 mask; 5736 5737 mask = 1 << QIB_EEPROM_WEN_NUM; 5738 prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM; 5739 gpio_7322_mod(dd, wen ? 0 : mask, mask, mask); 5740 5741 return prev_wen & 1; 5742 } 5743 5744 /* 5745 * Read fundamental info we need to use the chip. These are 5746 * the registers that describe chip capabilities, and are 5747 * saved in shadow registers. 5748 */ 5749 static void get_7322_chip_params(struct qib_devdata *dd) 5750 { 5751 u64 val; 5752 u32 piobufs; 5753 int mtu; 5754 5755 dd->palign = qib_read_kreg32(dd, kr_pagealign); 5756 5757 dd->uregbase = qib_read_kreg32(dd, kr_userregbase); 5758 5759 dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); 5760 dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); 5761 dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); 5762 dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); 5763 dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; 5764 5765 val = qib_read_kreg64(dd, kr_sendpiobufcnt); 5766 dd->piobcnt2k = val & ~0U; 5767 dd->piobcnt4k = val >> 32; 5768 val = qib_read_kreg64(dd, kr_sendpiosize); 5769 dd->piosize2k = val & ~0U; 5770 dd->piosize4k = val >> 32; 5771 5772 mtu = ib_mtu_enum_to_int(qib_ibmtu); 5773 if (mtu == -1) 5774 mtu = QIB_DEFAULT_MTU; 5775 dd->pport[0].ibmtu = (u32)mtu; 5776 dd->pport[1].ibmtu = (u32)mtu; 5777 5778 /* these may be adjusted in init_chip_wc_pat() */ 5779 dd->pio2kbase = (u32 __iomem *) 5780 ((char __iomem *) dd->kregbase + dd->pio2k_bufbase); 5781 dd->pio4kbase = (u32 __iomem *) 5782 ((char __iomem *) dd->kregbase + 5783 (dd->piobufbase >> 32)); 5784 /* 5785 * 4K buffers take 2 pages; we use roundup just to be 5786 * paranoid; we calculate it once here, rather than on 5787 * ever buf allocate 5788 */ 5789 dd->align4k = ALIGN(dd->piosize4k, dd->palign); 5790 5791 piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS; 5792 5793 dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / 5794 (sizeof(u64) * BITS_PER_BYTE / 2); 5795 } 5796 5797 /* 5798 * The chip base addresses in cspec and cpspec have to be set 5799 * after possible init_chip_wc_pat(), rather than in 5800 * get_7322_chip_params(), so split out as separate function 5801 */ 5802 static void qib_7322_set_baseaddrs(struct qib_devdata *dd) 5803 { 5804 u32 cregbase; 5805 5806 cregbase = qib_read_kreg32(dd, kr_counterregbase); 5807 5808 dd->cspec->cregbase = (u64 __iomem *)(cregbase + 5809 (char __iomem *)dd->kregbase); 5810 5811 dd->egrtidbase = (u64 __iomem *) 5812 ((char __iomem *) dd->kregbase + dd->rcvegrbase); 5813 5814 /* port registers are defined as relative to base of chip */ 5815 dd->pport[0].cpspec->kpregbase = 5816 (u64 __iomem *)((char __iomem *)dd->kregbase); 5817 dd->pport[1].cpspec->kpregbase = 5818 (u64 __iomem *)(dd->palign + 5819 (char __iomem *)dd->kregbase); 5820 dd->pport[0].cpspec->cpregbase = 5821 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[0], 5822 kr_counterregbase) + (char __iomem *)dd->kregbase); 5823 dd->pport[1].cpspec->cpregbase = 5824 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[1], 5825 kr_counterregbase) + (char __iomem *)dd->kregbase); 5826 } 5827 5828 /* 5829 * This is a fairly special-purpose observer, so we only support 5830 * the port-specific parts of SendCtrl 5831 */ 5832 5833 #define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) | \ 5834 SYM_MASK(SendCtrl_0, SDmaEnable) | \ 5835 SYM_MASK(SendCtrl_0, SDmaIntEnable) | \ 5836 SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \ 5837 SYM_MASK(SendCtrl_0, SDmaHalt) | \ 5838 SYM_MASK(SendCtrl_0, IBVLArbiterEn) | \ 5839 SYM_MASK(SendCtrl_0, ForceCreditUpToDate)) 5840 5841 static int sendctrl_hook(struct qib_devdata *dd, 5842 const struct diag_observer *op, u32 offs, 5843 u64 *data, u64 mask, int only_32) 5844 { 5845 unsigned long flags; 5846 unsigned idx; 5847 unsigned pidx; 5848 struct qib_pportdata *ppd = NULL; 5849 u64 local_data, all_bits; 5850 5851 /* 5852 * The fixed correspondence between Physical ports and pports is 5853 * severed. We need to hunt for the ppd that corresponds 5854 * to the offset we got. And we have to do that without admitting 5855 * we know the stride, apparently. 5856 */ 5857 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 5858 u64 __iomem *psptr; 5859 u32 psoffs; 5860 5861 ppd = dd->pport + pidx; 5862 if (!ppd->cpspec->kpregbase) 5863 continue; 5864 5865 psptr = ppd->cpspec->kpregbase + krp_sendctrl; 5866 psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr); 5867 if (psoffs == offs) 5868 break; 5869 } 5870 5871 /* If pport is not being managed by driver, just avoid shadows. */ 5872 if (pidx >= dd->num_pports) 5873 ppd = NULL; 5874 5875 /* In any case, "idx" is flat index in kreg space */ 5876 idx = offs / sizeof(u64); 5877 5878 all_bits = ~0ULL; 5879 if (only_32) 5880 all_bits >>= 32; 5881 5882 spin_lock_irqsave(&dd->sendctrl_lock, flags); 5883 if (!ppd || (mask & all_bits) != all_bits) { 5884 /* 5885 * At least some mask bits are zero, so we need 5886 * to read. The judgement call is whether from 5887 * reg or shadow. First-cut: read reg, and complain 5888 * if any bits which should be shadowed are different 5889 * from their shadowed value. 5890 */ 5891 if (only_32) 5892 local_data = (u64)qib_read_kreg32(dd, idx); 5893 else 5894 local_data = qib_read_kreg64(dd, idx); 5895 *data = (local_data & ~mask) | (*data & mask); 5896 } 5897 if (mask) { 5898 /* 5899 * At least some mask bits are one, so we need 5900 * to write, but only shadow some bits. 5901 */ 5902 u64 sval, tval; /* Shadowed, transient */ 5903 5904 /* 5905 * New shadow val is bits we don't want to touch, 5906 * ORed with bits we do, that are intended for shadow. 5907 */ 5908 if (ppd) { 5909 sval = ppd->p_sendctrl & ~mask; 5910 sval |= *data & SENDCTRL_SHADOWED & mask; 5911 ppd->p_sendctrl = sval; 5912 } else 5913 sval = *data & SENDCTRL_SHADOWED & mask; 5914 tval = sval | (*data & ~SENDCTRL_SHADOWED & mask); 5915 qib_write_kreg(dd, idx, tval); 5916 qib_write_kreg(dd, kr_scratch, 0Ull); 5917 } 5918 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 5919 return only_32 ? 4 : 8; 5920 } 5921 5922 static const struct diag_observer sendctrl_0_observer = { 5923 sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64), 5924 KREG_IDX(SendCtrl_0) * sizeof(u64) 5925 }; 5926 5927 static const struct diag_observer sendctrl_1_observer = { 5928 sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64), 5929 KREG_IDX(SendCtrl_1) * sizeof(u64) 5930 }; 5931 5932 static ushort sdma_fetch_prio = 8; 5933 module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO); 5934 MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority"); 5935 5936 /* Besides logging QSFP events, we set appropriate TxDDS values */ 5937 static void init_txdds_table(struct qib_pportdata *ppd, int override); 5938 5939 static void qsfp_7322_event(struct work_struct *work) 5940 { 5941 struct qib_qsfp_data *qd; 5942 struct qib_pportdata *ppd; 5943 unsigned long pwrup; 5944 unsigned long flags; 5945 int ret; 5946 u32 le2; 5947 5948 qd = container_of(work, struct qib_qsfp_data, work); 5949 ppd = qd->ppd; 5950 pwrup = qd->t_insert + 5951 msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC); 5952 5953 /* Delay for 20 msecs to allow ModPrs resistor to setup */ 5954 mdelay(QSFP_MODPRS_LAG_MSEC); 5955 5956 if (!qib_qsfp_mod_present(ppd)) { 5957 ppd->cpspec->qsfp_data.modpresent = 0; 5958 /* Set the physical link to disabled */ 5959 qib_set_ib_7322_lstate(ppd, 0, 5960 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 5961 spin_lock_irqsave(&ppd->lflags_lock, flags); 5962 ppd->lflags &= ~QIBL_LINKV; 5963 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5964 } else { 5965 /* 5966 * Some QSFP's not only do not respond until the full power-up 5967 * time, but may behave badly if we try. So hold off responding 5968 * to insertion. 5969 */ 5970 while (1) { 5971 if (time_is_before_jiffies(pwrup)) 5972 break; 5973 msleep(20); 5974 } 5975 5976 ret = qib_refresh_qsfp_cache(ppd, &qd->cache); 5977 5978 /* 5979 * Need to change LE2 back to defaults if we couldn't 5980 * read the cable type (to handle cable swaps), so do this 5981 * even on failure to read cable information. We don't 5982 * get here for QME, so IS_QME check not needed here. 5983 */ 5984 if (!ret && !ppd->dd->cspec->r1) { 5985 if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) 5986 le2 = LE2_QME; 5987 else if (qd->cache.atten[1] >= qib_long_atten && 5988 QSFP_IS_CU(qd->cache.tech)) 5989 le2 = LE2_5m; 5990 else 5991 le2 = LE2_DEFAULT; 5992 } else 5993 le2 = LE2_DEFAULT; 5994 ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); 5995 /* 5996 * We always change parameteters, since we can choose 5997 * values for cables without eeproms, and the cable may have 5998 * changed from a cable with full or partial eeprom content 5999 * to one with partial or no content. 6000 */ 6001 init_txdds_table(ppd, 0); 6002 /* The physical link is being re-enabled only when the 6003 * previous state was DISABLED and the VALID bit is not 6004 * set. This should only happen when the cable has been 6005 * physically pulled. */ 6006 if (!ppd->cpspec->qsfp_data.modpresent && 6007 (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) { 6008 ppd->cpspec->qsfp_data.modpresent = 1; 6009 qib_set_ib_7322_lstate(ppd, 0, 6010 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); 6011 spin_lock_irqsave(&ppd->lflags_lock, flags); 6012 ppd->lflags |= QIBL_LINKV; 6013 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 6014 } 6015 } 6016 } 6017 6018 /* 6019 * There is little we can do but complain to the user if QSFP 6020 * initialization fails. 6021 */ 6022 static void qib_init_7322_qsfp(struct qib_pportdata *ppd) 6023 { 6024 unsigned long flags; 6025 struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data; 6026 struct qib_devdata *dd = ppd->dd; 6027 u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N; 6028 6029 mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); 6030 qd->ppd = ppd; 6031 qib_qsfp_init(qd, qsfp_7322_event); 6032 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 6033 dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert)); 6034 dd->cspec->gpio_mask |= mod_prs_bit; 6035 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 6036 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 6037 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 6038 } 6039 6040 /* 6041 * called at device initialization time, and also if the txselect 6042 * module parameter is changed. This is used for cables that don't 6043 * have valid QSFP EEPROMs (not present, or attenuation is zero). 6044 * We initialize to the default, then if there is a specific 6045 * unit,port match, we use that (and set it immediately, for the 6046 * current speed, if the link is at INIT or better). 6047 * String format is "default# unit#,port#=# ... u,p=#", separators must 6048 * be a SPACE character. A newline terminates. The u,p=# tuples may 6049 * optionally have "u,p=#,#", where the final # is the H1 value 6050 * The last specific match is used (actually, all are used, but last 6051 * one is the one that winds up set); if none at all, fall back on default. 6052 */ 6053 static void set_no_qsfp_atten(struct qib_devdata *dd, int change) 6054 { 6055 char *nxt, *str; 6056 u32 pidx, unit, port, deflt, h1; 6057 unsigned long val; 6058 int any = 0, seth1; 6059 int txdds_size; 6060 6061 str = txselect_list; 6062 6063 /* default number is validated in setup_txselect() */ 6064 deflt = simple_strtoul(str, &nxt, 0); 6065 for (pidx = 0; pidx < dd->num_pports; ++pidx) 6066 dd->pport[pidx].cpspec->no_eep = deflt; 6067 6068 txdds_size = TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ; 6069 if (IS_QME(dd) || IS_QMH(dd)) 6070 txdds_size += TXDDS_MFG_SZ; 6071 6072 while (*nxt && nxt[1]) { 6073 str = ++nxt; 6074 unit = simple_strtoul(str, &nxt, 0); 6075 if (nxt == str || !*nxt || *nxt != ',') { 6076 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6077 ; 6078 continue; 6079 } 6080 str = ++nxt; 6081 port = simple_strtoul(str, &nxt, 0); 6082 if (nxt == str || *nxt != '=') { 6083 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6084 ; 6085 continue; 6086 } 6087 str = ++nxt; 6088 val = simple_strtoul(str, &nxt, 0); 6089 if (nxt == str) { 6090 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6091 ; 6092 continue; 6093 } 6094 if (val >= txdds_size) 6095 continue; 6096 seth1 = 0; 6097 h1 = 0; /* gcc thinks it might be used uninitted */ 6098 if (*nxt == ',' && nxt[1]) { 6099 str = ++nxt; 6100 h1 = (u32)simple_strtoul(str, &nxt, 0); 6101 if (nxt == str) 6102 while (*nxt && *nxt++ != ' ') /* skip */ 6103 ; 6104 else 6105 seth1 = 1; 6106 } 6107 for (pidx = 0; dd->unit == unit && pidx < dd->num_pports; 6108 ++pidx) { 6109 struct qib_pportdata *ppd = &dd->pport[pidx]; 6110 6111 if (ppd->port != port || !ppd->link_speed_supported) 6112 continue; 6113 ppd->cpspec->no_eep = val; 6114 if (seth1) 6115 ppd->cpspec->h1_val = h1; 6116 /* now change the IBC and serdes, overriding generic */ 6117 init_txdds_table(ppd, 1); 6118 /* Re-enable the physical state machine on mezz boards 6119 * now that the correct settings have been set. 6120 * QSFP boards are handles by the QSFP event handler */ 6121 if (IS_QMH(dd) || IS_QME(dd)) 6122 qib_set_ib_7322_lstate(ppd, 0, 6123 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); 6124 any++; 6125 } 6126 if (*nxt == '\n') 6127 break; /* done */ 6128 } 6129 if (change && !any) { 6130 /* no specific setting, use the default. 6131 * Change the IBC and serdes, but since it's 6132 * general, don't override specific settings. 6133 */ 6134 for (pidx = 0; pidx < dd->num_pports; ++pidx) 6135 if (dd->pport[pidx].link_speed_supported) 6136 init_txdds_table(&dd->pport[pidx], 0); 6137 } 6138 } 6139 6140 /* handle the txselect parameter changing */ 6141 static int setup_txselect(const char *str, const struct kernel_param *kp) 6142 { 6143 struct qib_devdata *dd; 6144 unsigned long val; 6145 char *n; 6146 6147 if (strlen(str) >= ARRAY_SIZE(txselect_list)) { 6148 pr_info("txselect_values string too long\n"); 6149 return -ENOSPC; 6150 } 6151 val = simple_strtoul(str, &n, 0); 6152 if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + 6153 TXDDS_MFG_SZ)) { 6154 pr_info("txselect_values must start with a number < %d\n", 6155 TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ); 6156 return -EINVAL; 6157 } 6158 strncpy(txselect_list, str, ARRAY_SIZE(txselect_list) - 1); 6159 6160 list_for_each_entry(dd, &qib_dev_list, list) 6161 if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322) 6162 set_no_qsfp_atten(dd, 1); 6163 return 0; 6164 } 6165 6166 /* 6167 * Write the final few registers that depend on some of the 6168 * init setup. Done late in init, just before bringing up 6169 * the serdes. 6170 */ 6171 static int qib_late_7322_initreg(struct qib_devdata *dd) 6172 { 6173 int ret = 0, n; 6174 u64 val; 6175 6176 qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); 6177 qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); 6178 qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); 6179 qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); 6180 val = qib_read_kreg64(dd, kr_sendpioavailaddr); 6181 if (val != dd->pioavailregs_phys) { 6182 qib_dev_err(dd, 6183 "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n", 6184 (unsigned long) dd->pioavailregs_phys, 6185 (unsigned long long) val); 6186 ret = -EINVAL; 6187 } 6188 6189 n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 6190 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL); 6191 /* driver sends get pkey, lid, etc. checking also, to catch bugs */ 6192 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL); 6193 6194 qib_register_observer(dd, &sendctrl_0_observer); 6195 qib_register_observer(dd, &sendctrl_1_observer); 6196 6197 dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN; 6198 qib_write_kreg(dd, kr_control, dd->control); 6199 /* 6200 * Set SendDmaFetchPriority and init Tx params, including 6201 * QSFP handler on boards that have QSFP. 6202 * First set our default attenuation entry for cables that 6203 * don't have valid attenuation. 6204 */ 6205 set_no_qsfp_atten(dd, 0); 6206 for (n = 0; n < dd->num_pports; ++n) { 6207 struct qib_pportdata *ppd = dd->pport + n; 6208 6209 qib_write_kreg_port(ppd, krp_senddmaprioritythld, 6210 sdma_fetch_prio & 0xf); 6211 /* Initialize qsfp if present on board. */ 6212 if (dd->flags & QIB_HAS_QSFP) 6213 qib_init_7322_qsfp(ppd); 6214 } 6215 dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN; 6216 qib_write_kreg(dd, kr_control, dd->control); 6217 6218 return ret; 6219 } 6220 6221 /* per IB port errors. */ 6222 #define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \ 6223 MASK_ACROSS(8, 15)) 6224 #define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41)) 6225 #define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \ 6226 MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \ 6227 MASK_ACROSS(0, 11)) 6228 6229 /* 6230 * Write the initialization per-port registers that need to be done at 6231 * driver load and after reset completes (i.e., that aren't done as part 6232 * of other init procedures called from qib_init.c). 6233 * Some of these should be redundant on reset, but play safe. 6234 */ 6235 static void write_7322_init_portregs(struct qib_pportdata *ppd) 6236 { 6237 u64 val; 6238 int i; 6239 6240 if (!ppd->link_speed_supported) { 6241 /* no buffer credits for this port */ 6242 for (i = 1; i < 8; i++) 6243 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); 6244 qib_write_kreg_port(ppd, krp_ibcctrl_b, 0); 6245 qib_write_kreg(ppd->dd, kr_scratch, 0); 6246 return; 6247 } 6248 6249 /* 6250 * Set the number of supported virtual lanes in IBC, 6251 * for flow control packet handling on unsupported VLs 6252 */ 6253 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); 6254 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP); 6255 val |= (u64)(ppd->vls_supported - 1) << 6256 SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP); 6257 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 6258 6259 qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP); 6260 6261 /* enable tx header checking */ 6262 qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY | 6263 IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID | 6264 IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ); 6265 6266 qib_write_kreg_port(ppd, krp_ncmodectrl, 6267 SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal)); 6268 6269 /* 6270 * Unconditionally clear the bufmask bits. If SDMA is 6271 * enabled, we'll set them appropriately later. 6272 */ 6273 qib_write_kreg_port(ppd, krp_senddmabufmask0, 0); 6274 qib_write_kreg_port(ppd, krp_senddmabufmask1, 0); 6275 qib_write_kreg_port(ppd, krp_senddmabufmask2, 0); 6276 if (ppd->dd->cspec->r1) 6277 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate); 6278 } 6279 6280 /* 6281 * Write the initialization per-device registers that need to be done at 6282 * driver load and after reset completes (i.e., that aren't done as part 6283 * of other init procedures called from qib_init.c). Also write per-port 6284 * registers that are affected by overall device config, such as QP mapping 6285 * Some of these should be redundant on reset, but play safe. 6286 */ 6287 static void write_7322_initregs(struct qib_devdata *dd) 6288 { 6289 struct qib_pportdata *ppd; 6290 int i, pidx; 6291 u64 val; 6292 6293 /* Set Multicast QPs received by port 2 to map to context one. */ 6294 qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1); 6295 6296 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 6297 unsigned n, regno; 6298 unsigned long flags; 6299 6300 if (dd->n_krcv_queues < 2 || 6301 !dd->pport[pidx].link_speed_supported) 6302 continue; 6303 6304 ppd = &dd->pport[pidx]; 6305 6306 /* be paranoid against later code motion, etc. */ 6307 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 6308 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable); 6309 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 6310 6311 /* Initialize QP to context mapping */ 6312 regno = krp_rcvqpmaptable; 6313 val = 0; 6314 if (dd->num_pports > 1) 6315 n = dd->first_user_ctxt / dd->num_pports; 6316 else 6317 n = dd->first_user_ctxt - 1; 6318 for (i = 0; i < 32; ) { 6319 unsigned ctxt; 6320 6321 if (dd->num_pports > 1) 6322 ctxt = (i % n) * dd->num_pports + pidx; 6323 else if (i % n) 6324 ctxt = (i % n) + 1; 6325 else 6326 ctxt = ppd->hw_pidx; 6327 val |= ctxt << (5 * (i % 6)); 6328 i++; 6329 if (i % 6 == 0) { 6330 qib_write_kreg_port(ppd, regno, val); 6331 val = 0; 6332 regno++; 6333 } 6334 } 6335 qib_write_kreg_port(ppd, regno, val); 6336 } 6337 6338 /* 6339 * Setup up interrupt mitigation for kernel contexts, but 6340 * not user contexts (user contexts use interrupts when 6341 * stalled waiting for any packet, so want those interrupts 6342 * right away). 6343 */ 6344 for (i = 0; i < dd->first_user_ctxt; i++) { 6345 dd->cspec->rcvavail_timeout[i] = rcv_int_timeout; 6346 qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout); 6347 } 6348 6349 /* 6350 * Initialize as (disabled) rcvflow tables. Application code 6351 * will setup each flow as it uses the flow. 6352 * Doesn't clear any of the error bits that might be set. 6353 */ 6354 val = TIDFLOW_ERRBITS; /* these are W1C */ 6355 for (i = 0; i < dd->cfgctxts; i++) { 6356 int flow; 6357 6358 for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++) 6359 qib_write_ureg(dd, ur_rcvflowtable+flow, val, i); 6360 } 6361 6362 /* 6363 * dual cards init to dual port recovery, single port cards to 6364 * the one port. Dual port cards may later adjust to 1 port, 6365 * and then back to dual port if both ports are connected 6366 * */ 6367 if (dd->num_pports) 6368 setup_7322_link_recovery(dd->pport, dd->num_pports > 1); 6369 } 6370 6371 static int qib_init_7322_variables(struct qib_devdata *dd) 6372 { 6373 struct qib_pportdata *ppd; 6374 unsigned features, pidx, sbufcnt; 6375 int ret, mtu; 6376 u32 sbufs, updthresh; 6377 resource_size_t vl15off; 6378 6379 /* pport structs are contiguous, allocated after devdata */ 6380 ppd = (struct qib_pportdata *)(dd + 1); 6381 dd->pport = ppd; 6382 ppd[0].dd = dd; 6383 ppd[1].dd = dd; 6384 6385 dd->cspec = (struct qib_chip_specific *)(ppd + 2); 6386 6387 ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1); 6388 ppd[1].cpspec = &ppd[0].cpspec[1]; 6389 ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */ 6390 ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */ 6391 6392 spin_lock_init(&dd->cspec->rcvmod_lock); 6393 spin_lock_init(&dd->cspec->gpio_lock); 6394 6395 /* we haven't yet set QIB_PRESENT, so use read directly */ 6396 dd->revision = readq(&dd->kregbase[kr_revision]); 6397 6398 if ((dd->revision & 0xffffffffU) == 0xffffffffU) { 6399 qib_dev_err(dd, 6400 "Revision register read failure, giving up initialization\n"); 6401 ret = -ENODEV; 6402 goto bail; 6403 } 6404 dd->flags |= QIB_PRESENT; /* now register routines work */ 6405 6406 dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor); 6407 dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor); 6408 dd->cspec->r1 = dd->minrev == 1; 6409 6410 get_7322_chip_params(dd); 6411 features = qib_7322_boardname(dd); 6412 6413 /* now that piobcnt2k and 4k set, we can allocate these */ 6414 sbufcnt = dd->piobcnt2k + dd->piobcnt4k + 6415 NUM_VL15_BUFS + BITS_PER_LONG - 1; 6416 sbufcnt /= BITS_PER_LONG; 6417 dd->cspec->sendchkenable = 6418 kmalloc_array(sbufcnt, sizeof(*dd->cspec->sendchkenable), 6419 GFP_KERNEL); 6420 dd->cspec->sendgrhchk = 6421 kmalloc_array(sbufcnt, sizeof(*dd->cspec->sendgrhchk), 6422 GFP_KERNEL); 6423 dd->cspec->sendibchk = 6424 kmalloc_array(sbufcnt, sizeof(*dd->cspec->sendibchk), 6425 GFP_KERNEL); 6426 if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk || 6427 !dd->cspec->sendibchk) { 6428 ret = -ENOMEM; 6429 goto bail; 6430 } 6431 6432 ppd = dd->pport; 6433 6434 /* 6435 * GPIO bits for TWSI data and clock, 6436 * used for serial EEPROM. 6437 */ 6438 dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; 6439 dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; 6440 dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV; 6441 6442 dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY | 6443 QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP | 6444 QIB_HAS_THRESH_UPDATE | 6445 (sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0); 6446 dd->flags |= qib_special_trigger ? 6447 QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA; 6448 6449 /* 6450 * Setup initial values. These may change when PAT is enabled, but 6451 * we need these to do initial chip register accesses. 6452 */ 6453 qib_7322_set_baseaddrs(dd); 6454 6455 mtu = ib_mtu_enum_to_int(qib_ibmtu); 6456 if (mtu == -1) 6457 mtu = QIB_DEFAULT_MTU; 6458 6459 dd->cspec->int_enable_mask = QIB_I_BITSEXTANT; 6460 /* all hwerrors become interrupts, unless special purposed */ 6461 dd->cspec->hwerrmask = ~0ULL; 6462 /* link_recovery setup causes these errors, so ignore them, 6463 * other than clearing them when they occur */ 6464 dd->cspec->hwerrmask &= 6465 ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) | 6466 SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) | 6467 HWE_MASK(LATriggered)); 6468 6469 for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) { 6470 struct qib_chippport_specific *cp = ppd->cpspec; 6471 6472 ppd->link_speed_supported = features & PORT_SPD_CAP; 6473 features >>= PORT_SPD_CAP_SHIFT; 6474 if (!ppd->link_speed_supported) { 6475 /* single port mode (7340, or configured) */ 6476 dd->skip_kctxt_mask |= 1 << pidx; 6477 if (pidx == 0) { 6478 /* Make sure port is disabled. */ 6479 qib_write_kreg_port(ppd, krp_rcvctrl, 0); 6480 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); 6481 ppd[0] = ppd[1]; 6482 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, 6483 IBSerdesPClkNotDetectMask_0) 6484 | SYM_MASK(HwErrMask, 6485 SDmaMemReadErrMask_0)); 6486 dd->cspec->int_enable_mask &= ~( 6487 SYM_MASK(IntMask, SDmaCleanupDoneMask_0) | 6488 SYM_MASK(IntMask, SDmaIdleIntMask_0) | 6489 SYM_MASK(IntMask, SDmaProgressIntMask_0) | 6490 SYM_MASK(IntMask, SDmaIntMask_0) | 6491 SYM_MASK(IntMask, ErrIntMask_0) | 6492 SYM_MASK(IntMask, SendDoneIntMask_0)); 6493 } else { 6494 /* Make sure port is disabled. */ 6495 qib_write_kreg_port(ppd, krp_rcvctrl, 0); 6496 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); 6497 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, 6498 IBSerdesPClkNotDetectMask_1) 6499 | SYM_MASK(HwErrMask, 6500 SDmaMemReadErrMask_1)); 6501 dd->cspec->int_enable_mask &= ~( 6502 SYM_MASK(IntMask, SDmaCleanupDoneMask_1) | 6503 SYM_MASK(IntMask, SDmaIdleIntMask_1) | 6504 SYM_MASK(IntMask, SDmaProgressIntMask_1) | 6505 SYM_MASK(IntMask, SDmaIntMask_1) | 6506 SYM_MASK(IntMask, ErrIntMask_1) | 6507 SYM_MASK(IntMask, SendDoneIntMask_1)); 6508 } 6509 continue; 6510 } 6511 6512 dd->num_pports++; 6513 ret = qib_init_pportdata(ppd, dd, pidx, dd->num_pports); 6514 if (ret) { 6515 dd->num_pports--; 6516 goto bail; 6517 } 6518 6519 ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; 6520 ppd->link_width_enabled = IB_WIDTH_4X; 6521 ppd->link_speed_enabled = ppd->link_speed_supported; 6522 /* 6523 * Set the initial values to reasonable default, will be set 6524 * for real when link is up. 6525 */ 6526 ppd->link_width_active = IB_WIDTH_4X; 6527 ppd->link_speed_active = QIB_IB_SDR; 6528 ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS]; 6529 switch (qib_num_cfg_vls) { 6530 case 1: 6531 ppd->vls_supported = IB_VL_VL0; 6532 break; 6533 case 2: 6534 ppd->vls_supported = IB_VL_VL0_1; 6535 break; 6536 default: 6537 qib_devinfo(dd->pcidev, 6538 "Invalid num_vls %u, using 4 VLs\n", 6539 qib_num_cfg_vls); 6540 qib_num_cfg_vls = 4; 6541 /* fall through */ 6542 case 4: 6543 ppd->vls_supported = IB_VL_VL0_3; 6544 break; 6545 case 8: 6546 if (mtu <= 2048) 6547 ppd->vls_supported = IB_VL_VL0_7; 6548 else { 6549 qib_devinfo(dd->pcidev, 6550 "Invalid num_vls %u for MTU %d , using 4 VLs\n", 6551 qib_num_cfg_vls, mtu); 6552 ppd->vls_supported = IB_VL_VL0_3; 6553 qib_num_cfg_vls = 4; 6554 } 6555 break; 6556 } 6557 ppd->vls_operational = ppd->vls_supported; 6558 6559 init_waitqueue_head(&cp->autoneg_wait); 6560 INIT_DELAYED_WORK(&cp->autoneg_work, 6561 autoneg_7322_work); 6562 if (ppd->dd->cspec->r1) 6563 INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work); 6564 6565 /* 6566 * For Mez and similar cards, no qsfp info, so do 6567 * the "cable info" setup here. Can be overridden 6568 * in adapter-specific routines. 6569 */ 6570 if (!(dd->flags & QIB_HAS_QSFP)) { 6571 if (!IS_QMH(dd) && !IS_QME(dd)) 6572 qib_devinfo(dd->pcidev, 6573 "IB%u:%u: Unknown mezzanine card type\n", 6574 dd->unit, ppd->port); 6575 cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME; 6576 /* 6577 * Choose center value as default tx serdes setting 6578 * until changed through module parameter. 6579 */ 6580 ppd->cpspec->no_eep = IS_QMH(dd) ? 6581 TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4; 6582 } else 6583 cp->h1_val = H1_FORCE_VAL; 6584 6585 /* Avoid writes to chip for mini_init */ 6586 if (!qib_mini_init) 6587 write_7322_init_portregs(ppd); 6588 6589 timer_setup(&cp->chase_timer, reenable_chase, 0); 6590 6591 ppd++; 6592 } 6593 6594 dd->rcvhdrentsize = qib_rcvhdrentsize ? 6595 qib_rcvhdrentsize : QIB_RCVHDR_ENTSIZE; 6596 dd->rcvhdrsize = qib_rcvhdrsize ? 6597 qib_rcvhdrsize : QIB_DFLT_RCVHDRSIZE; 6598 dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); 6599 6600 /* we always allocate at least 2048 bytes for eager buffers */ 6601 dd->rcvegrbufsize = max(mtu, 2048); 6602 BUG_ON(!is_power_of_2(dd->rcvegrbufsize)); 6603 dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize); 6604 6605 qib_7322_tidtemplate(dd); 6606 6607 /* 6608 * We can request a receive interrupt for 1 or 6609 * more packets from current offset. 6610 */ 6611 dd->rhdrhead_intr_off = 6612 (u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT; 6613 6614 /* setup the stats timer; the add_timer is done at end of init */ 6615 timer_setup(&dd->stats_timer, qib_get_7322_faststats, 0); 6616 6617 dd->ureg_align = 0x10000; /* 64KB alignment */ 6618 6619 dd->piosize2kmax_dwords = dd->piosize2k >> 2; 6620 6621 qib_7322_config_ctxts(dd); 6622 qib_set_ctxtcnt(dd); 6623 6624 /* 6625 * We do not set WC on the VL15 buffers to avoid 6626 * a rare problem with unaligned writes from 6627 * interrupt-flushed store buffers, so we need 6628 * to map those separately here. We can't solve 6629 * this for the rarely used mtrr case. 6630 */ 6631 ret = init_chip_wc_pat(dd, 0); 6632 if (ret) 6633 goto bail; 6634 6635 /* vl15 buffers start just after the 4k buffers */ 6636 vl15off = dd->physaddr + (dd->piobufbase >> 32) + 6637 dd->piobcnt4k * dd->align4k; 6638 dd->piovl15base = ioremap_nocache(vl15off, 6639 NUM_VL15_BUFS * dd->align4k); 6640 if (!dd->piovl15base) { 6641 ret = -ENOMEM; 6642 goto bail; 6643 } 6644 6645 qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ 6646 6647 ret = 0; 6648 if (qib_mini_init) 6649 goto bail; 6650 if (!dd->num_pports) { 6651 qib_dev_err(dd, "No ports enabled, giving up initialization\n"); 6652 goto bail; /* no error, so can still figure out why err */ 6653 } 6654 6655 write_7322_initregs(dd); 6656 ret = qib_create_ctxts(dd); 6657 init_7322_cntrnames(dd); 6658 6659 updthresh = 8U; /* update threshold */ 6660 6661 /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA. 6662 * reserve the update threshold amount for other kernel use, such 6663 * as sending SMI, MAD, and ACKs, or 3, whichever is greater, 6664 * unless we aren't enabling SDMA, in which case we want to use 6665 * all the 4k bufs for the kernel. 6666 * if this was less than the update threshold, we could wait 6667 * a long time for an update. Coded this way because we 6668 * sometimes change the update threshold for various reasons, 6669 * and we want this to remain robust. 6670 */ 6671 if (dd->flags & QIB_HAS_SEND_DMA) { 6672 dd->cspec->sdmabufcnt = dd->piobcnt4k; 6673 sbufs = updthresh > 3 ? updthresh : 3; 6674 } else { 6675 dd->cspec->sdmabufcnt = 0; 6676 sbufs = dd->piobcnt4k; 6677 } 6678 dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k - 6679 dd->cspec->sdmabufcnt; 6680 dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs; 6681 dd->cspec->lastbuf_for_pio--; /* range is <= , not < */ 6682 dd->last_pio = dd->cspec->lastbuf_for_pio; 6683 dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ? 6684 dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0; 6685 6686 /* 6687 * If we have 16 user contexts, we will have 7 sbufs 6688 * per context, so reduce the update threshold to match. We 6689 * want to update before we actually run out, at low pbufs/ctxt 6690 * so give ourselves some margin. 6691 */ 6692 if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh) 6693 updthresh = dd->pbufsctxt - 2; 6694 dd->cspec->updthresh_dflt = updthresh; 6695 dd->cspec->updthresh = updthresh; 6696 6697 /* before full enable, no interrupts, no locking needed */ 6698 dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) 6699 << SYM_LSB(SendCtrl, AvailUpdThld)) | 6700 SYM_MASK(SendCtrl, SendBufAvailPad64Byte); 6701 6702 dd->psxmitwait_supported = 1; 6703 dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE; 6704 bail: 6705 if (!dd->ctxtcnt) 6706 dd->ctxtcnt = 1; /* for other initialization code */ 6707 6708 return ret; 6709 } 6710 6711 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc, 6712 u32 *pbufnum) 6713 { 6714 u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; 6715 struct qib_devdata *dd = ppd->dd; 6716 6717 /* last is same for 2k and 4k, because we use 4k if all 2k busy */ 6718 if (pbc & PBC_7322_VL15_SEND) { 6719 first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx; 6720 last = first; 6721 } else { 6722 if ((plen + 1) > dd->piosize2kmax_dwords) 6723 first = dd->piobcnt2k; 6724 else 6725 first = 0; 6726 last = dd->cspec->lastbuf_for_pio; 6727 } 6728 return qib_getsendbuf_range(dd, pbufnum, first, last); 6729 } 6730 6731 static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv, 6732 u32 start) 6733 { 6734 qib_write_kreg_port(ppd, krp_psinterval, intv); 6735 qib_write_kreg_port(ppd, krp_psstart, start); 6736 } 6737 6738 /* 6739 * Must be called with sdma_lock held, or before init finished. 6740 */ 6741 static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) 6742 { 6743 qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt); 6744 } 6745 6746 /* 6747 * sdma_lock should be acquired before calling this routine 6748 */ 6749 static void dump_sdma_7322_state(struct qib_pportdata *ppd) 6750 { 6751 u64 reg, reg1, reg2; 6752 6753 reg = qib_read_kreg_port(ppd, krp_senddmastatus); 6754 qib_dev_porterr(ppd->dd, ppd->port, 6755 "SDMA senddmastatus: 0x%016llx\n", reg); 6756 6757 reg = qib_read_kreg_port(ppd, krp_sendctrl); 6758 qib_dev_porterr(ppd->dd, ppd->port, 6759 "SDMA sendctrl: 0x%016llx\n", reg); 6760 6761 reg = qib_read_kreg_port(ppd, krp_senddmabase); 6762 qib_dev_porterr(ppd->dd, ppd->port, 6763 "SDMA senddmabase: 0x%016llx\n", reg); 6764 6765 reg = qib_read_kreg_port(ppd, krp_senddmabufmask0); 6766 reg1 = qib_read_kreg_port(ppd, krp_senddmabufmask1); 6767 reg2 = qib_read_kreg_port(ppd, krp_senddmabufmask2); 6768 qib_dev_porterr(ppd->dd, ppd->port, 6769 "SDMA senddmabufmask 0:%llx 1:%llx 2:%llx\n", 6770 reg, reg1, reg2); 6771 6772 /* get bufuse bits, clear them, and print them again if non-zero */ 6773 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); 6774 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg); 6775 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); 6776 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg1); 6777 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); 6778 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg2); 6779 /* 0 and 1 should always be zero, so print as short form */ 6780 qib_dev_porterr(ppd->dd, ppd->port, 6781 "SDMA current senddmabuf_use 0:%llx 1:%llx 2:%llx\n", 6782 reg, reg1, reg2); 6783 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); 6784 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); 6785 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); 6786 /* 0 and 1 should always be zero, so print as short form */ 6787 qib_dev_porterr(ppd->dd, ppd->port, 6788 "SDMA cleared senddmabuf_use 0:%llx 1:%llx 2:%llx\n", 6789 reg, reg1, reg2); 6790 6791 reg = qib_read_kreg_port(ppd, krp_senddmatail); 6792 qib_dev_porterr(ppd->dd, ppd->port, 6793 "SDMA senddmatail: 0x%016llx\n", reg); 6794 6795 reg = qib_read_kreg_port(ppd, krp_senddmahead); 6796 qib_dev_porterr(ppd->dd, ppd->port, 6797 "SDMA senddmahead: 0x%016llx\n", reg); 6798 6799 reg = qib_read_kreg_port(ppd, krp_senddmaheadaddr); 6800 qib_dev_porterr(ppd->dd, ppd->port, 6801 "SDMA senddmaheadaddr: 0x%016llx\n", reg); 6802 6803 reg = qib_read_kreg_port(ppd, krp_senddmalengen); 6804 qib_dev_porterr(ppd->dd, ppd->port, 6805 "SDMA senddmalengen: 0x%016llx\n", reg); 6806 6807 reg = qib_read_kreg_port(ppd, krp_senddmadesccnt); 6808 qib_dev_porterr(ppd->dd, ppd->port, 6809 "SDMA senddmadesccnt: 0x%016llx\n", reg); 6810 6811 reg = qib_read_kreg_port(ppd, krp_senddmaidlecnt); 6812 qib_dev_porterr(ppd->dd, ppd->port, 6813 "SDMA senddmaidlecnt: 0x%016llx\n", reg); 6814 6815 reg = qib_read_kreg_port(ppd, krp_senddmaprioritythld); 6816 qib_dev_porterr(ppd->dd, ppd->port, 6817 "SDMA senddmapriorityhld: 0x%016llx\n", reg); 6818 6819 reg = qib_read_kreg_port(ppd, krp_senddmareloadcnt); 6820 qib_dev_porterr(ppd->dd, ppd->port, 6821 "SDMA senddmareloadcnt: 0x%016llx\n", reg); 6822 6823 dump_sdma_state(ppd); 6824 } 6825 6826 static struct sdma_set_state_action sdma_7322_action_table[] = { 6827 [qib_sdma_state_s00_hw_down] = { 6828 .go_s99_running_tofalse = 1, 6829 .op_enable = 0, 6830 .op_intenable = 0, 6831 .op_halt = 0, 6832 .op_drain = 0, 6833 }, 6834 [qib_sdma_state_s10_hw_start_up_wait] = { 6835 .op_enable = 0, 6836 .op_intenable = 1, 6837 .op_halt = 1, 6838 .op_drain = 0, 6839 }, 6840 [qib_sdma_state_s20_idle] = { 6841 .op_enable = 1, 6842 .op_intenable = 1, 6843 .op_halt = 1, 6844 .op_drain = 0, 6845 }, 6846 [qib_sdma_state_s30_sw_clean_up_wait] = { 6847 .op_enable = 0, 6848 .op_intenable = 1, 6849 .op_halt = 1, 6850 .op_drain = 0, 6851 }, 6852 [qib_sdma_state_s40_hw_clean_up_wait] = { 6853 .op_enable = 1, 6854 .op_intenable = 1, 6855 .op_halt = 1, 6856 .op_drain = 0, 6857 }, 6858 [qib_sdma_state_s50_hw_halt_wait] = { 6859 .op_enable = 1, 6860 .op_intenable = 1, 6861 .op_halt = 1, 6862 .op_drain = 1, 6863 }, 6864 [qib_sdma_state_s99_running] = { 6865 .op_enable = 1, 6866 .op_intenable = 1, 6867 .op_halt = 0, 6868 .op_drain = 0, 6869 .go_s99_running_totrue = 1, 6870 }, 6871 }; 6872 6873 static void qib_7322_sdma_init_early(struct qib_pportdata *ppd) 6874 { 6875 ppd->sdma_state.set_state_action = sdma_7322_action_table; 6876 } 6877 6878 static int init_sdma_7322_regs(struct qib_pportdata *ppd) 6879 { 6880 struct qib_devdata *dd = ppd->dd; 6881 unsigned lastbuf, erstbuf; 6882 u64 senddmabufmask[3] = { 0 }; 6883 int n, ret = 0; 6884 6885 qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys); 6886 qib_sdma_7322_setlengen(ppd); 6887 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ 6888 qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt); 6889 qib_write_kreg_port(ppd, krp_senddmadesccnt, 0); 6890 qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys); 6891 6892 if (dd->num_pports) 6893 n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */ 6894 else 6895 n = dd->cspec->sdmabufcnt; /* failsafe for init */ 6896 erstbuf = (dd->piobcnt2k + dd->piobcnt4k) - 6897 ((dd->num_pports == 1 || ppd->port == 2) ? n : 6898 dd->cspec->sdmabufcnt); 6899 lastbuf = erstbuf + n; 6900 6901 ppd->sdma_state.first_sendbuf = erstbuf; 6902 ppd->sdma_state.last_sendbuf = lastbuf; 6903 for (; erstbuf < lastbuf; ++erstbuf) { 6904 unsigned word = erstbuf / BITS_PER_LONG; 6905 unsigned bit = erstbuf & (BITS_PER_LONG - 1); 6906 6907 BUG_ON(word >= 3); 6908 senddmabufmask[word] |= 1ULL << bit; 6909 } 6910 qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]); 6911 qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]); 6912 qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]); 6913 return ret; 6914 } 6915 6916 /* sdma_lock must be held */ 6917 static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd) 6918 { 6919 struct qib_devdata *dd = ppd->dd; 6920 int sane; 6921 int use_dmahead; 6922 u16 swhead; 6923 u16 swtail; 6924 u16 cnt; 6925 u16 hwhead; 6926 6927 use_dmahead = __qib_sdma_running(ppd) && 6928 (dd->flags & QIB_HAS_SDMA_TIMEOUT); 6929 retry: 6930 hwhead = use_dmahead ? 6931 (u16) le64_to_cpu(*ppd->sdma_head_dma) : 6932 (u16) qib_read_kreg_port(ppd, krp_senddmahead); 6933 6934 swhead = ppd->sdma_descq_head; 6935 swtail = ppd->sdma_descq_tail; 6936 cnt = ppd->sdma_descq_cnt; 6937 6938 if (swhead < swtail) 6939 /* not wrapped */ 6940 sane = (hwhead >= swhead) & (hwhead <= swtail); 6941 else if (swhead > swtail) 6942 /* wrapped around */ 6943 sane = ((hwhead >= swhead) && (hwhead < cnt)) || 6944 (hwhead <= swtail); 6945 else 6946 /* empty */ 6947 sane = (hwhead == swhead); 6948 6949 if (unlikely(!sane)) { 6950 if (use_dmahead) { 6951 /* try one more time, directly from the register */ 6952 use_dmahead = 0; 6953 goto retry; 6954 } 6955 /* proceed as if no progress */ 6956 hwhead = swhead; 6957 } 6958 6959 return hwhead; 6960 } 6961 6962 static int qib_sdma_7322_busy(struct qib_pportdata *ppd) 6963 { 6964 u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus); 6965 6966 return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) || 6967 (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) || 6968 !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) || 6969 !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty)); 6970 } 6971 6972 /* 6973 * Compute the amount of delay before sending the next packet if the 6974 * port's send rate differs from the static rate set for the QP. 6975 * The delay affects the next packet and the amount of the delay is 6976 * based on the length of the this packet. 6977 */ 6978 static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen, 6979 u8 srate, u8 vl) 6980 { 6981 u8 snd_mult = ppd->delay_mult; 6982 u8 rcv_mult = ib_rate_to_delay[srate]; 6983 u32 ret; 6984 6985 ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0; 6986 6987 /* Indicate VL15, else set the VL in the control word */ 6988 if (vl == 15) 6989 ret |= PBC_7322_VL15_SEND_CTRL; 6990 else 6991 ret |= vl << PBC_VL_NUM_LSB; 6992 ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB; 6993 6994 return ret; 6995 } 6996 6997 /* 6998 * Enable the per-port VL15 send buffers for use. 6999 * They follow the rest of the buffers, without a config parameter. 7000 * This was in initregs, but that is done before the shadow 7001 * is set up, and this has to be done after the shadow is 7002 * set up. 7003 */ 7004 static void qib_7322_initvl15_bufs(struct qib_devdata *dd) 7005 { 7006 unsigned vl15bufs; 7007 7008 vl15bufs = dd->piobcnt2k + dd->piobcnt4k; 7009 qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS, 7010 TXCHK_CHG_TYPE_KERN, NULL); 7011 } 7012 7013 static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd) 7014 { 7015 if (rcd->ctxt < NUM_IB_PORTS) { 7016 if (rcd->dd->num_pports > 1) { 7017 rcd->rcvegrcnt = KCTXT0_EGRCNT / 2; 7018 rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0; 7019 } else { 7020 rcd->rcvegrcnt = KCTXT0_EGRCNT; 7021 rcd->rcvegr_tid_base = 0; 7022 } 7023 } else { 7024 rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt; 7025 rcd->rcvegr_tid_base = KCTXT0_EGRCNT + 7026 (rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt; 7027 } 7028 } 7029 7030 #define QTXSLEEPS 5000 7031 static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start, 7032 u32 len, u32 which, struct qib_ctxtdata *rcd) 7033 { 7034 int i; 7035 const int last = start + len - 1; 7036 const int lastr = last / BITS_PER_LONG; 7037 u32 sleeps = 0; 7038 int wait = rcd != NULL; 7039 unsigned long flags; 7040 7041 while (wait) { 7042 unsigned long shadow = 0; 7043 int cstart, previ = -1; 7044 7045 /* 7046 * when flipping from kernel to user, we can't change 7047 * the checking type if the buffer is allocated to the 7048 * driver. It's OK the other direction, because it's 7049 * from close, and we have just disarm'ed all the 7050 * buffers. All the kernel to kernel changes are also 7051 * OK. 7052 */ 7053 for (cstart = start; cstart <= last; cstart++) { 7054 i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) 7055 / BITS_PER_LONG; 7056 if (i != previ) { 7057 shadow = (unsigned long) 7058 le64_to_cpu(dd->pioavailregs_dma[i]); 7059 previ = i; 7060 } 7061 if (test_bit(((2 * cstart) + 7062 QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) 7063 % BITS_PER_LONG, &shadow)) 7064 break; 7065 } 7066 7067 if (cstart > last) 7068 break; 7069 7070 if (sleeps == QTXSLEEPS) 7071 break; 7072 /* make sure we see an updated copy next time around */ 7073 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7074 sleeps++; 7075 msleep(20); 7076 } 7077 7078 switch (which) { 7079 case TXCHK_CHG_TYPE_DIS1: 7080 /* 7081 * disable checking on a range; used by diags; just 7082 * one buffer, but still written generically 7083 */ 7084 for (i = start; i <= last; i++) 7085 clear_bit(i, dd->cspec->sendchkenable); 7086 break; 7087 7088 case TXCHK_CHG_TYPE_ENAB1: 7089 /* 7090 * (re)enable checking on a range; used by diags; just 7091 * one buffer, but still written generically; read 7092 * scratch to be sure buffer actually triggered, not 7093 * just flushed from processor. 7094 */ 7095 qib_read_kreg32(dd, kr_scratch); 7096 for (i = start; i <= last; i++) 7097 set_bit(i, dd->cspec->sendchkenable); 7098 break; 7099 7100 case TXCHK_CHG_TYPE_KERN: 7101 /* usable by kernel */ 7102 for (i = start; i <= last; i++) { 7103 set_bit(i, dd->cspec->sendibchk); 7104 clear_bit(i, dd->cspec->sendgrhchk); 7105 } 7106 spin_lock_irqsave(&dd->uctxt_lock, flags); 7107 /* see if we need to raise avail update threshold */ 7108 for (i = dd->first_user_ctxt; 7109 dd->cspec->updthresh != dd->cspec->updthresh_dflt 7110 && i < dd->cfgctxts; i++) 7111 if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt && 7112 ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1) 7113 < dd->cspec->updthresh_dflt) 7114 break; 7115 spin_unlock_irqrestore(&dd->uctxt_lock, flags); 7116 if (i == dd->cfgctxts) { 7117 spin_lock_irqsave(&dd->sendctrl_lock, flags); 7118 dd->cspec->updthresh = dd->cspec->updthresh_dflt; 7119 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); 7120 dd->sendctrl |= (dd->cspec->updthresh & 7121 SYM_RMASK(SendCtrl, AvailUpdThld)) << 7122 SYM_LSB(SendCtrl, AvailUpdThld); 7123 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7124 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7125 } 7126 break; 7127 7128 case TXCHK_CHG_TYPE_USER: 7129 /* for user process */ 7130 for (i = start; i <= last; i++) { 7131 clear_bit(i, dd->cspec->sendibchk); 7132 set_bit(i, dd->cspec->sendgrhchk); 7133 } 7134 spin_lock_irqsave(&dd->sendctrl_lock, flags); 7135 if (rcd && rcd->subctxt_cnt && ((rcd->piocnt 7136 / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) { 7137 dd->cspec->updthresh = (rcd->piocnt / 7138 rcd->subctxt_cnt) - 1; 7139 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); 7140 dd->sendctrl |= (dd->cspec->updthresh & 7141 SYM_RMASK(SendCtrl, AvailUpdThld)) 7142 << SYM_LSB(SendCtrl, AvailUpdThld); 7143 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7144 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7145 } else 7146 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7147 break; 7148 7149 default: 7150 break; 7151 } 7152 7153 for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i) 7154 qib_write_kreg(dd, kr_sendcheckmask + i, 7155 dd->cspec->sendchkenable[i]); 7156 7157 for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) { 7158 qib_write_kreg(dd, kr_sendgrhcheckmask + i, 7159 dd->cspec->sendgrhchk[i]); 7160 qib_write_kreg(dd, kr_sendibpktmask + i, 7161 dd->cspec->sendibchk[i]); 7162 } 7163 7164 /* 7165 * Be sure whatever we did was seen by the chip and acted upon, 7166 * before we return. Mostly important for which >= 2. 7167 */ 7168 qib_read_kreg32(dd, kr_scratch); 7169 } 7170 7171 7172 /* useful for trigger analyzers, etc. */ 7173 static void writescratch(struct qib_devdata *dd, u32 val) 7174 { 7175 qib_write_kreg(dd, kr_scratch, val); 7176 } 7177 7178 /* Dummy for now, use chip regs soon */ 7179 static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum) 7180 { 7181 return -ENXIO; 7182 } 7183 7184 /** 7185 * qib_init_iba7322_funcs - set up the chip-specific function pointers 7186 * @dev: the pci_dev for qlogic_ib device 7187 * @ent: pci_device_id struct for this dev 7188 * 7189 * Also allocates, inits, and returns the devdata struct for this 7190 * device instance 7191 * 7192 * This is global, and is called directly at init to set up the 7193 * chip-specific function pointers for later use. 7194 */ 7195 struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev, 7196 const struct pci_device_id *ent) 7197 { 7198 struct qib_devdata *dd; 7199 int ret, i; 7200 u32 tabsize, actual_cnt = 0; 7201 7202 dd = qib_alloc_devdata(pdev, 7203 NUM_IB_PORTS * sizeof(struct qib_pportdata) + 7204 sizeof(struct qib_chip_specific) + 7205 NUM_IB_PORTS * sizeof(struct qib_chippport_specific)); 7206 if (IS_ERR(dd)) 7207 goto bail; 7208 7209 dd->f_bringup_serdes = qib_7322_bringup_serdes; 7210 dd->f_cleanup = qib_setup_7322_cleanup; 7211 dd->f_clear_tids = qib_7322_clear_tids; 7212 dd->f_free_irq = qib_7322_free_irq; 7213 dd->f_get_base_info = qib_7322_get_base_info; 7214 dd->f_get_msgheader = qib_7322_get_msgheader; 7215 dd->f_getsendbuf = qib_7322_getsendbuf; 7216 dd->f_gpio_mod = gpio_7322_mod; 7217 dd->f_eeprom_wen = qib_7322_eeprom_wen; 7218 dd->f_hdrqempty = qib_7322_hdrqempty; 7219 dd->f_ib_updown = qib_7322_ib_updown; 7220 dd->f_init_ctxt = qib_7322_init_ctxt; 7221 dd->f_initvl15_bufs = qib_7322_initvl15_bufs; 7222 dd->f_intr_fallback = qib_7322_intr_fallback; 7223 dd->f_late_initreg = qib_late_7322_initreg; 7224 dd->f_setpbc_control = qib_7322_setpbc_control; 7225 dd->f_portcntr = qib_portcntr_7322; 7226 dd->f_put_tid = qib_7322_put_tid; 7227 dd->f_quiet_serdes = qib_7322_mini_quiet_serdes; 7228 dd->f_rcvctrl = rcvctrl_7322_mod; 7229 dd->f_read_cntrs = qib_read_7322cntrs; 7230 dd->f_read_portcntrs = qib_read_7322portcntrs; 7231 dd->f_reset = qib_do_7322_reset; 7232 dd->f_init_sdma_regs = init_sdma_7322_regs; 7233 dd->f_sdma_busy = qib_sdma_7322_busy; 7234 dd->f_sdma_gethead = qib_sdma_7322_gethead; 7235 dd->f_sdma_sendctrl = qib_7322_sdma_sendctrl; 7236 dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt; 7237 dd->f_sdma_update_tail = qib_sdma_update_7322_tail; 7238 dd->f_sendctrl = sendctrl_7322_mod; 7239 dd->f_set_armlaunch = qib_set_7322_armlaunch; 7240 dd->f_set_cntr_sample = qib_set_cntr_7322_sample; 7241 dd->f_iblink_state = qib_7322_iblink_state; 7242 dd->f_ibphys_portstate = qib_7322_phys_portstate; 7243 dd->f_get_ib_cfg = qib_7322_get_ib_cfg; 7244 dd->f_set_ib_cfg = qib_7322_set_ib_cfg; 7245 dd->f_set_ib_loopback = qib_7322_set_loopback; 7246 dd->f_get_ib_table = qib_7322_get_ib_table; 7247 dd->f_set_ib_table = qib_7322_set_ib_table; 7248 dd->f_set_intr_state = qib_7322_set_intr_state; 7249 dd->f_setextled = qib_setup_7322_setextled; 7250 dd->f_txchk_change = qib_7322_txchk_change; 7251 dd->f_update_usrhead = qib_update_7322_usrhead; 7252 dd->f_wantpiobuf_intr = qib_wantpiobuf_7322_intr; 7253 dd->f_xgxs_reset = qib_7322_mini_pcs_reset; 7254 dd->f_sdma_hw_clean_up = qib_7322_sdma_hw_clean_up; 7255 dd->f_sdma_hw_start_up = qib_7322_sdma_hw_start_up; 7256 dd->f_sdma_init_early = qib_7322_sdma_init_early; 7257 dd->f_writescratch = writescratch; 7258 dd->f_tempsense_rd = qib_7322_tempsense_rd; 7259 #ifdef CONFIG_INFINIBAND_QIB_DCA 7260 dd->f_notify_dca = qib_7322_notify_dca; 7261 #endif 7262 /* 7263 * Do remaining PCIe setup and save PCIe values in dd. 7264 * Any error printing is already done by the init code. 7265 * On return, we have the chip mapped, but chip registers 7266 * are not set up until start of qib_init_7322_variables. 7267 */ 7268 ret = qib_pcie_ddinit(dd, pdev, ent); 7269 if (ret < 0) 7270 goto bail_free; 7271 7272 /* initialize chip-specific variables */ 7273 ret = qib_init_7322_variables(dd); 7274 if (ret) 7275 goto bail_cleanup; 7276 7277 if (qib_mini_init || !dd->num_pports) 7278 goto bail; 7279 7280 /* 7281 * Determine number of vectors we want; depends on port count 7282 * and number of configured kernel receive queues actually used. 7283 * Should also depend on whether sdma is enabled or not, but 7284 * that's such a rare testing case it's not worth worrying about. 7285 */ 7286 tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table); 7287 for (i = 0; i < tabsize; i++) 7288 if ((i < ARRAY_SIZE(irq_table) && 7289 irq_table[i].port <= dd->num_pports) || 7290 (i >= ARRAY_SIZE(irq_table) && 7291 dd->rcd[i - ARRAY_SIZE(irq_table)])) 7292 actual_cnt++; 7293 /* reduce by ctxt's < 2 */ 7294 if (qib_krcvq01_no_msi) 7295 actual_cnt -= dd->num_pports; 7296 7297 tabsize = actual_cnt; 7298 dd->cspec->msix_entries = kcalloc(tabsize, 7299 sizeof(struct qib_msix_entry), 7300 GFP_KERNEL); 7301 if (!dd->cspec->msix_entries) 7302 tabsize = 0; 7303 7304 if (qib_pcie_params(dd, 8, &tabsize)) 7305 qib_dev_err(dd, 7306 "Failed to setup PCIe or interrupts; continuing anyway\n"); 7307 /* may be less than we wanted, if not enough available */ 7308 dd->cspec->num_msix_entries = tabsize; 7309 7310 /* setup interrupt handler */ 7311 qib_setup_7322_interrupt(dd, 1); 7312 7313 /* clear diagctrl register, in case diags were running and crashed */ 7314 qib_write_kreg(dd, kr_hwdiagctrl, 0); 7315 #ifdef CONFIG_INFINIBAND_QIB_DCA 7316 if (!dca_add_requester(&pdev->dev)) { 7317 qib_devinfo(dd->pcidev, "DCA enabled\n"); 7318 dd->flags |= QIB_DCA_ENABLED; 7319 qib_setup_dca(dd); 7320 } 7321 #endif 7322 goto bail; 7323 7324 bail_cleanup: 7325 qib_pcie_ddcleanup(dd); 7326 bail_free: 7327 qib_free_devdata(dd); 7328 dd = ERR_PTR(ret); 7329 bail: 7330 return dd; 7331 } 7332 7333 /* 7334 * Set the table entry at the specified index from the table specifed. 7335 * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first 7336 * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR. 7337 * 'idx' below addresses the correct entry, while its 4 LSBs select the 7338 * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table. 7339 */ 7340 #define DDS_ENT_AMP_LSB 14 7341 #define DDS_ENT_MAIN_LSB 9 7342 #define DDS_ENT_POST_LSB 5 7343 #define DDS_ENT_PRE_XTRA_LSB 3 7344 #define DDS_ENT_PRE_LSB 0 7345 7346 /* 7347 * Set one entry in the TxDDS table for spec'd port 7348 * ridx picks one of the entries, while tp points 7349 * to the appropriate table entry. 7350 */ 7351 static void set_txdds(struct qib_pportdata *ppd, int ridx, 7352 const struct txdds_ent *tp) 7353 { 7354 struct qib_devdata *dd = ppd->dd; 7355 u32 pack_ent; 7356 int regidx; 7357 7358 /* Get correct offset in chip-space, and in source table */ 7359 regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx; 7360 /* 7361 * We do not use qib_write_kreg_port() because it was intended 7362 * only for registers in the lower "port specific" pages. 7363 * So do index calculation by hand. 7364 */ 7365 if (ppd->hw_pidx) 7366 regidx += (dd->palign / sizeof(u64)); 7367 7368 pack_ent = tp->amp << DDS_ENT_AMP_LSB; 7369 pack_ent |= tp->main << DDS_ENT_MAIN_LSB; 7370 pack_ent |= tp->pre << DDS_ENT_PRE_LSB; 7371 pack_ent |= tp->post << DDS_ENT_POST_LSB; 7372 qib_write_kreg(dd, regidx, pack_ent); 7373 /* Prevent back-to-back writes by hitting scratch */ 7374 qib_write_kreg(ppd->dd, kr_scratch, 0); 7375 } 7376 7377 static const struct vendor_txdds_ent vendor_txdds[] = { 7378 { /* Amphenol 1m 30awg NoEq */ 7379 { 0x41, 0x50, 0x48 }, "584470002 ", 7380 { 10, 0, 0, 5 }, { 10, 0, 0, 9 }, { 7, 1, 0, 13 }, 7381 }, 7382 { /* Amphenol 3m 28awg NoEq */ 7383 { 0x41, 0x50, 0x48 }, "584470004 ", 7384 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 7, 15 }, 7385 }, 7386 { /* Finisar 3m OM2 Optical */ 7387 { 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL", 7388 { 0, 0, 0, 3 }, { 0, 0, 0, 4 }, { 0, 0, 0, 13 }, 7389 }, 7390 { /* Finisar 30m OM2 Optical */ 7391 { 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL", 7392 { 0, 0, 0, 1 }, { 0, 0, 0, 5 }, { 0, 0, 0, 11 }, 7393 }, 7394 { /* Finisar Default OM2 Optical */ 7395 { 0x00, 0x90, 0x65 }, NULL, 7396 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 0, 0, 12 }, 7397 }, 7398 { /* Gore 1m 30awg NoEq */ 7399 { 0x00, 0x21, 0x77 }, "QSN3300-1 ", 7400 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 0, 15 }, 7401 }, 7402 { /* Gore 2m 30awg NoEq */ 7403 { 0x00, 0x21, 0x77 }, "QSN3300-2 ", 7404 { 0, 0, 0, 8 }, { 0, 0, 0, 10 }, { 0, 1, 7, 15 }, 7405 }, 7406 { /* Gore 1m 28awg NoEq */ 7407 { 0x00, 0x21, 0x77 }, "QSN3800-1 ", 7408 { 0, 0, 0, 6 }, { 0, 0, 0, 8 }, { 0, 1, 0, 15 }, 7409 }, 7410 { /* Gore 3m 28awg NoEq */ 7411 { 0x00, 0x21, 0x77 }, "QSN3800-3 ", 7412 { 0, 0, 0, 9 }, { 0, 0, 0, 13 }, { 0, 1, 7, 15 }, 7413 }, 7414 { /* Gore 5m 24awg Eq */ 7415 { 0x00, 0x21, 0x77 }, "QSN7000-5 ", 7416 { 0, 0, 0, 7 }, { 0, 0, 0, 9 }, { 0, 1, 3, 15 }, 7417 }, 7418 { /* Gore 7m 24awg Eq */ 7419 { 0x00, 0x21, 0x77 }, "QSN7000-7 ", 7420 { 0, 0, 0, 9 }, { 0, 0, 0, 11 }, { 0, 2, 6, 15 }, 7421 }, 7422 { /* Gore 5m 26awg Eq */ 7423 { 0x00, 0x21, 0x77 }, "QSN7600-5 ", 7424 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 9, 13 }, 7425 }, 7426 { /* Gore 7m 26awg Eq */ 7427 { 0x00, 0x21, 0x77 }, "QSN7600-7 ", 7428 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 10, 1, 8, 15 }, 7429 }, 7430 { /* Intersil 12m 24awg Active */ 7431 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224", 7432 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 3, 0, 9 }, 7433 }, 7434 { /* Intersil 10m 28awg Active */ 7435 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028", 7436 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 2, 0, 2 }, 7437 }, 7438 { /* Intersil 7m 30awg Active */ 7439 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730", 7440 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 1, 0, 3 }, 7441 }, 7442 { /* Intersil 5m 32awg Active */ 7443 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532", 7444 { 0, 0, 0, 6 }, { 0, 0, 0, 6 }, { 0, 2, 0, 8 }, 7445 }, 7446 { /* Intersil Default Active */ 7447 { 0x00, 0x30, 0xB4 }, NULL, 7448 { 0, 0, 0, 6 }, { 0, 0, 0, 5 }, { 0, 2, 0, 5 }, 7449 }, 7450 { /* Luxtera 20m Active Optical */ 7451 { 0x00, 0x25, 0x63 }, NULL, 7452 { 0, 0, 0, 5 }, { 0, 0, 0, 8 }, { 0, 2, 0, 12 }, 7453 }, 7454 { /* Molex 1M Cu loopback */ 7455 { 0x00, 0x09, 0x3A }, "74763-0025 ", 7456 { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, 7457 }, 7458 { /* Molex 2m 28awg NoEq */ 7459 { 0x00, 0x09, 0x3A }, "74757-2201 ", 7460 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 1, 15 }, 7461 }, 7462 }; 7463 7464 static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = { 7465 /* amp, pre, main, post */ 7466 { 2, 2, 15, 6 }, /* Loopback */ 7467 { 0, 0, 0, 1 }, /* 2 dB */ 7468 { 0, 0, 0, 2 }, /* 3 dB */ 7469 { 0, 0, 0, 3 }, /* 4 dB */ 7470 { 0, 0, 0, 4 }, /* 5 dB */ 7471 { 0, 0, 0, 5 }, /* 6 dB */ 7472 { 0, 0, 0, 6 }, /* 7 dB */ 7473 { 0, 0, 0, 7 }, /* 8 dB */ 7474 { 0, 0, 0, 8 }, /* 9 dB */ 7475 { 0, 0, 0, 9 }, /* 10 dB */ 7476 { 0, 0, 0, 10 }, /* 11 dB */ 7477 { 0, 0, 0, 11 }, /* 12 dB */ 7478 { 0, 0, 0, 12 }, /* 13 dB */ 7479 { 0, 0, 0, 13 }, /* 14 dB */ 7480 { 0, 0, 0, 14 }, /* 15 dB */ 7481 { 0, 0, 0, 15 }, /* 16 dB */ 7482 }; 7483 7484 static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = { 7485 /* amp, pre, main, post */ 7486 { 2, 2, 15, 6 }, /* Loopback */ 7487 { 0, 0, 0, 8 }, /* 2 dB */ 7488 { 0, 0, 0, 8 }, /* 3 dB */ 7489 { 0, 0, 0, 9 }, /* 4 dB */ 7490 { 0, 0, 0, 9 }, /* 5 dB */ 7491 { 0, 0, 0, 10 }, /* 6 dB */ 7492 { 0, 0, 0, 10 }, /* 7 dB */ 7493 { 0, 0, 0, 11 }, /* 8 dB */ 7494 { 0, 0, 0, 11 }, /* 9 dB */ 7495 { 0, 0, 0, 12 }, /* 10 dB */ 7496 { 0, 0, 0, 12 }, /* 11 dB */ 7497 { 0, 0, 0, 13 }, /* 12 dB */ 7498 { 0, 0, 0, 13 }, /* 13 dB */ 7499 { 0, 0, 0, 14 }, /* 14 dB */ 7500 { 0, 0, 0, 14 }, /* 15 dB */ 7501 { 0, 0, 0, 15 }, /* 16 dB */ 7502 }; 7503 7504 static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = { 7505 /* amp, pre, main, post */ 7506 { 2, 2, 15, 6 }, /* Loopback */ 7507 { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */ 7508 { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */ 7509 { 0, 1, 0, 11 }, /* 4 dB */ 7510 { 0, 1, 0, 13 }, /* 5 dB */ 7511 { 0, 1, 0, 15 }, /* 6 dB */ 7512 { 0, 1, 3, 15 }, /* 7 dB */ 7513 { 0, 1, 7, 15 }, /* 8 dB */ 7514 { 0, 1, 7, 15 }, /* 9 dB */ 7515 { 0, 1, 8, 15 }, /* 10 dB */ 7516 { 0, 1, 9, 15 }, /* 11 dB */ 7517 { 0, 1, 10, 15 }, /* 12 dB */ 7518 { 0, 2, 6, 15 }, /* 13 dB */ 7519 { 0, 2, 7, 15 }, /* 14 dB */ 7520 { 0, 2, 8, 15 }, /* 15 dB */ 7521 { 0, 2, 9, 15 }, /* 16 dB */ 7522 }; 7523 7524 /* 7525 * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ. 7526 * These are mostly used for mez cards going through connectors 7527 * and backplane traces, but can be used to add other "unusual" 7528 * table values as well. 7529 */ 7530 static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = { 7531 /* amp, pre, main, post */ 7532 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ 7533 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ 7534 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ 7535 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ 7536 { 0, 0, 0, 3 }, /* QMH7342 backplane settings */ 7537 { 0, 0, 0, 4 }, /* QMH7342 backplane settings */ 7538 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7539 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7540 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7541 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7542 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7543 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7544 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7545 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7546 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7547 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7548 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7549 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7550 }; 7551 7552 static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { 7553 /* amp, pre, main, post */ 7554 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ 7555 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ 7556 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ 7557 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ 7558 { 0, 0, 0, 9 }, /* QMH7342 backplane settings */ 7559 { 0, 0, 0, 10 }, /* QMH7342 backplane settings */ 7560 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7561 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7562 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7563 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7564 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7565 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7566 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7567 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7568 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7569 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7570 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7571 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7572 }; 7573 7574 static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { 7575 /* amp, pre, main, post */ 7576 { 0, 1, 0, 4 }, /* QMH7342 backplane settings */ 7577 { 0, 1, 0, 5 }, /* QMH7342 backplane settings */ 7578 { 0, 1, 0, 6 }, /* QMH7342 backplane settings */ 7579 { 0, 1, 0, 8 }, /* QMH7342 backplane settings */ 7580 { 0, 1, 0, 10 }, /* QMH7342 backplane settings */ 7581 { 0, 1, 0, 12 }, /* QMH7342 backplane settings */ 7582 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7583 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7584 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7585 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7586 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7587 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7588 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7589 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7590 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7591 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7592 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7593 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7594 }; 7595 7596 static const struct txdds_ent txdds_extra_mfg[TXDDS_MFG_SZ] = { 7597 /* amp, pre, main, post */ 7598 { 0, 0, 0, 0 }, /* QME7342 mfg settings */ 7599 { 0, 0, 0, 6 }, /* QME7342 P2 mfg settings */ 7600 }; 7601 7602 static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds, 7603 unsigned atten) 7604 { 7605 /* 7606 * The attenuation table starts at 2dB for entry 1, 7607 * with entry 0 being the loopback entry. 7608 */ 7609 if (atten <= 2) 7610 atten = 1; 7611 else if (atten > TXDDS_TABLE_SZ) 7612 atten = TXDDS_TABLE_SZ - 1; 7613 else 7614 atten--; 7615 return txdds + atten; 7616 } 7617 7618 /* 7619 * if override is set, the module parameter txselect has a value 7620 * for this specific port, so use it, rather than our normal mechanism. 7621 */ 7622 static void find_best_ent(struct qib_pportdata *ppd, 7623 const struct txdds_ent **sdr_dds, 7624 const struct txdds_ent **ddr_dds, 7625 const struct txdds_ent **qdr_dds, int override) 7626 { 7627 struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache; 7628 int idx; 7629 7630 /* Search table of known cables */ 7631 for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) { 7632 const struct vendor_txdds_ent *v = vendor_txdds + idx; 7633 7634 if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) && 7635 (!v->partnum || 7636 !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) { 7637 *sdr_dds = &v->sdr; 7638 *ddr_dds = &v->ddr; 7639 *qdr_dds = &v->qdr; 7640 return; 7641 } 7642 } 7643 7644 /* Active cables don't have attenuation so we only set SERDES 7645 * settings to account for the attenuation of the board traces. */ 7646 if (!override && QSFP_IS_ACTIVE(qd->tech)) { 7647 *sdr_dds = txdds_sdr + ppd->dd->board_atten; 7648 *ddr_dds = txdds_ddr + ppd->dd->board_atten; 7649 *qdr_dds = txdds_qdr + ppd->dd->board_atten; 7650 return; 7651 } 7652 7653 if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] || 7654 qd->atten[1])) { 7655 *sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]); 7656 *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]); 7657 *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]); 7658 return; 7659 } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) { 7660 /* 7661 * If we have no (or incomplete) data from the cable 7662 * EEPROM, or no QSFP, or override is set, use the 7663 * module parameter value to index into the attentuation 7664 * table. 7665 */ 7666 idx = ppd->cpspec->no_eep; 7667 *sdr_dds = &txdds_sdr[idx]; 7668 *ddr_dds = &txdds_ddr[idx]; 7669 *qdr_dds = &txdds_qdr[idx]; 7670 } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { 7671 /* similar to above, but index into the "extra" table. */ 7672 idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ; 7673 *sdr_dds = &txdds_extra_sdr[idx]; 7674 *ddr_dds = &txdds_extra_ddr[idx]; 7675 *qdr_dds = &txdds_extra_qdr[idx]; 7676 } else if ((IS_QME(ppd->dd) || IS_QMH(ppd->dd)) && 7677 ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + 7678 TXDDS_MFG_SZ)) { 7679 idx = ppd->cpspec->no_eep - (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ); 7680 pr_info("IB%u:%u use idx %u into txdds_mfg\n", 7681 ppd->dd->unit, ppd->port, idx); 7682 *sdr_dds = &txdds_extra_mfg[idx]; 7683 *ddr_dds = &txdds_extra_mfg[idx]; 7684 *qdr_dds = &txdds_extra_mfg[idx]; 7685 } else { 7686 /* this shouldn't happen, it's range checked */ 7687 *sdr_dds = txdds_sdr + qib_long_atten; 7688 *ddr_dds = txdds_ddr + qib_long_atten; 7689 *qdr_dds = txdds_qdr + qib_long_atten; 7690 } 7691 } 7692 7693 static void init_txdds_table(struct qib_pportdata *ppd, int override) 7694 { 7695 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; 7696 struct txdds_ent *dds; 7697 int idx; 7698 int single_ent = 0; 7699 7700 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override); 7701 7702 /* for mez cards or override, use the selected value for all entries */ 7703 if (!(ppd->dd->flags & QIB_HAS_QSFP) || override) 7704 single_ent = 1; 7705 7706 /* Fill in the first entry with the best entry found. */ 7707 set_txdds(ppd, 0, sdr_dds); 7708 set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds); 7709 set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds); 7710 if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | 7711 QIBL_LINKACTIVE)) { 7712 dds = (struct txdds_ent *)(ppd->link_speed_active == 7713 QIB_IB_QDR ? qdr_dds : 7714 (ppd->link_speed_active == 7715 QIB_IB_DDR ? ddr_dds : sdr_dds)); 7716 write_tx_serdes_param(ppd, dds); 7717 } 7718 7719 /* Fill in the remaining entries with the default table values. */ 7720 for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) { 7721 set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx); 7722 set_txdds(ppd, idx + TXDDS_TABLE_SZ, 7723 single_ent ? ddr_dds : txdds_ddr + idx); 7724 set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ, 7725 single_ent ? qdr_dds : txdds_qdr + idx); 7726 } 7727 } 7728 7729 #define KR_AHB_ACC KREG_IDX(ahb_access_ctrl) 7730 #define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg) 7731 #define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy) 7732 #define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address) 7733 #define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data) 7734 #define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read) 7735 #define AHB_TRANS_TRIES 10 7736 7737 /* 7738 * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4, 7739 * 5=subsystem which is why most calls have "chan + chan >> 1" 7740 * for the channel argument. 7741 */ 7742 static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr, 7743 u32 data, u32 mask) 7744 { 7745 u32 rd_data, wr_data, sz_mask; 7746 u64 trans, acc, prev_acc; 7747 u32 ret = 0xBAD0BAD; 7748 int tries; 7749 7750 prev_acc = qib_read_kreg64(dd, KR_AHB_ACC); 7751 /* From this point on, make sure we return access */ 7752 acc = (quad << 1) | 1; 7753 qib_write_kreg(dd, KR_AHB_ACC, acc); 7754 7755 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7756 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7757 if (trans & AHB_TRANS_RDY) 7758 break; 7759 } 7760 if (tries >= AHB_TRANS_TRIES) { 7761 qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES); 7762 goto bail; 7763 } 7764 7765 /* If mask is not all 1s, we need to read, but different SerDes 7766 * entities have different sizes 7767 */ 7768 sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1; 7769 wr_data = data & mask & sz_mask; 7770 if ((~mask & sz_mask) != 0) { 7771 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); 7772 qib_write_kreg(dd, KR_AHB_TRANS, trans); 7773 7774 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7775 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7776 if (trans & AHB_TRANS_RDY) 7777 break; 7778 } 7779 if (tries >= AHB_TRANS_TRIES) { 7780 qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n", 7781 AHB_TRANS_TRIES); 7782 goto bail; 7783 } 7784 /* Re-read in case host split reads and read data first */ 7785 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7786 rd_data = (uint32_t)(trans >> AHB_DATA_LSB); 7787 wr_data |= (rd_data & ~mask & sz_mask); 7788 } 7789 7790 /* If mask is not zero, we need to write. */ 7791 if (mask & sz_mask) { 7792 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); 7793 trans |= ((uint64_t)wr_data << AHB_DATA_LSB); 7794 trans |= AHB_WR; 7795 qib_write_kreg(dd, KR_AHB_TRANS, trans); 7796 7797 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7798 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7799 if (trans & AHB_TRANS_RDY) 7800 break; 7801 } 7802 if (tries >= AHB_TRANS_TRIES) { 7803 qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n", 7804 AHB_TRANS_TRIES); 7805 goto bail; 7806 } 7807 } 7808 ret = wr_data; 7809 bail: 7810 qib_write_kreg(dd, KR_AHB_ACC, prev_acc); 7811 return ret; 7812 } 7813 7814 static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, 7815 unsigned mask) 7816 { 7817 struct qib_devdata *dd = ppd->dd; 7818 int chan; 7819 7820 for (chan = 0; chan < SERDES_CHANS; ++chan) { 7821 ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, 7822 data, mask); 7823 ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, 7824 0, 0); 7825 } 7826 } 7827 7828 static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable) 7829 { 7830 u64 data = qib_read_kreg_port(ppd, krp_serdesctrl); 7831 u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN); 7832 7833 if (enable && !state) { 7834 pr_info("IB%u:%u Turning LOS on\n", 7835 ppd->dd->unit, ppd->port); 7836 data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN); 7837 } else if (!enable && state) { 7838 pr_info("IB%u:%u Turning LOS off\n", 7839 ppd->dd->unit, ppd->port); 7840 data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN); 7841 } 7842 qib_write_kreg_port(ppd, krp_serdesctrl, data); 7843 } 7844 7845 static int serdes_7322_init(struct qib_pportdata *ppd) 7846 { 7847 int ret = 0; 7848 7849 if (ppd->dd->cspec->r1) 7850 ret = serdes_7322_init_old(ppd); 7851 else 7852 ret = serdes_7322_init_new(ppd); 7853 return ret; 7854 } 7855 7856 static int serdes_7322_init_old(struct qib_pportdata *ppd) 7857 { 7858 u32 le_val; 7859 7860 /* 7861 * Initialize the Tx DDS tables. Also done every QSFP event, 7862 * for adapters with QSFP 7863 */ 7864 init_txdds_table(ppd, 0); 7865 7866 /* ensure no tx overrides from earlier driver loads */ 7867 qib_write_kreg_port(ppd, krp_tx_deemph_override, 7868 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 7869 reset_tx_deemphasis_override)); 7870 7871 /* Patch some SerDes defaults to "Better for IB" */ 7872 /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */ 7873 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); 7874 7875 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ 7876 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); 7877 /* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */ 7878 ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6)); 7879 7880 /* May be overridden in qsfp_7322_event */ 7881 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; 7882 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); 7883 7884 /* enable LE1 adaptation for all but QME, which is disabled */ 7885 le_val = IS_QME(ppd->dd) ? 0 : 1; 7886 ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5)); 7887 7888 /* Clear cmode-override, may be set from older driver */ 7889 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); 7890 7891 /* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */ 7892 ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8)); 7893 7894 /* setup LoS params; these are subsystem, so chan == 5 */ 7895 /* LoS filter threshold_count on, ch 0-3, set to 8 */ 7896 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); 7897 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); 7898 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); 7899 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); 7900 7901 /* LoS filter threshold_count off, ch 0-3, set to 4 */ 7902 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); 7903 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); 7904 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); 7905 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); 7906 7907 /* LoS filter select enabled */ 7908 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); 7909 7910 /* LoS target data: SDR=4, DDR=2, QDR=1 */ 7911 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ 7912 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ 7913 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ 7914 7915 serdes_7322_los_enable(ppd, 1); 7916 7917 /* rxbistena; set 0 to avoid effects of it switch later */ 7918 ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15); 7919 7920 /* Configure 4 DFE taps, and only they adapt */ 7921 ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0)); 7922 7923 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ 7924 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; 7925 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); 7926 7927 /* 7928 * Set receive adaptation mode. SDR and DDR adaptation are 7929 * always on, and QDR is initially enabled; later disabled. 7930 */ 7931 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); 7932 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); 7933 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 7934 ppd->dd->cspec->r1 ? 7935 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); 7936 ppd->cpspec->qdr_dfe_on = 1; 7937 7938 /* FLoop LOS gate: PPM filter enabled */ 7939 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); 7940 7941 /* rx offset center enabled */ 7942 ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4); 7943 7944 if (!ppd->dd->cspec->r1) { 7945 ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12); 7946 ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8); 7947 } 7948 7949 /* Set the frequency loop bandwidth to 15 */ 7950 ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5)); 7951 7952 return 0; 7953 } 7954 7955 static int serdes_7322_init_new(struct qib_pportdata *ppd) 7956 { 7957 unsigned long tend; 7958 u32 le_val, rxcaldone; 7959 int chan, chan_done = (1 << SERDES_CHANS) - 1; 7960 7961 /* Clear cmode-override, may be set from older driver */ 7962 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); 7963 7964 /* ensure no tx overrides from earlier driver loads */ 7965 qib_write_kreg_port(ppd, krp_tx_deemph_override, 7966 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 7967 reset_tx_deemphasis_override)); 7968 7969 /* START OF LSI SUGGESTED SERDES BRINGUP */ 7970 /* Reset - Calibration Setup */ 7971 /* Stop DFE adaptaion */ 7972 ibsd_wr_allchans(ppd, 1, 0, BMASK(9, 1)); 7973 /* Disable LE1 */ 7974 ibsd_wr_allchans(ppd, 13, 0, BMASK(5, 5)); 7975 /* Disable autoadapt for LE1 */ 7976 ibsd_wr_allchans(ppd, 1, 0, BMASK(15, 15)); 7977 /* Disable LE2 */ 7978 ibsd_wr_allchans(ppd, 13, 0, BMASK(6, 6)); 7979 /* Disable VGA */ 7980 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); 7981 /* Disable AFE Offset Cancel */ 7982 ibsd_wr_allchans(ppd, 12, 0, BMASK(12, 12)); 7983 /* Disable Timing Loop */ 7984 ibsd_wr_allchans(ppd, 2, 0, BMASK(3, 3)); 7985 /* Disable Frequency Loop */ 7986 ibsd_wr_allchans(ppd, 2, 0, BMASK(4, 4)); 7987 /* Disable Baseline Wander Correction */ 7988 ibsd_wr_allchans(ppd, 13, 0, BMASK(13, 13)); 7989 /* Disable RX Calibration */ 7990 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); 7991 /* Disable RX Offset Calibration */ 7992 ibsd_wr_allchans(ppd, 12, 0, BMASK(4, 4)); 7993 /* Select BB CDR */ 7994 ibsd_wr_allchans(ppd, 2, (1 << 15), BMASK(15, 15)); 7995 /* CDR Step Size */ 7996 ibsd_wr_allchans(ppd, 5, 0, BMASK(9, 8)); 7997 /* Enable phase Calibration */ 7998 ibsd_wr_allchans(ppd, 12, (1 << 5), BMASK(5, 5)); 7999 /* DFE Bandwidth [2:14-12] */ 8000 ibsd_wr_allchans(ppd, 2, (4 << 12), BMASK(14, 12)); 8001 /* DFE Config (4 taps only) */ 8002 ibsd_wr_allchans(ppd, 16, 0, BMASK(1, 0)); 8003 /* Gain Loop Bandwidth */ 8004 if (!ppd->dd->cspec->r1) { 8005 ibsd_wr_allchans(ppd, 12, 1 << 12, BMASK(12, 12)); 8006 ibsd_wr_allchans(ppd, 12, 2 << 8, BMASK(11, 8)); 8007 } else { 8008 ibsd_wr_allchans(ppd, 19, (3 << 11), BMASK(13, 11)); 8009 } 8010 /* Baseline Wander Correction Gain [13:4-0] (leave as default) */ 8011 /* Baseline Wander Correction Gain [3:7-5] (leave as default) */ 8012 /* Data Rate Select [5:7-6] (leave as default) */ 8013 /* RX Parallel Word Width [3:10-8] (leave as default) */ 8014 8015 /* RX REST */ 8016 /* Single- or Multi-channel reset */ 8017 /* RX Analog reset */ 8018 /* RX Digital reset */ 8019 ibsd_wr_allchans(ppd, 0, 0, BMASK(15, 13)); 8020 msleep(20); 8021 /* RX Analog reset */ 8022 ibsd_wr_allchans(ppd, 0, (1 << 14), BMASK(14, 14)); 8023 msleep(20); 8024 /* RX Digital reset */ 8025 ibsd_wr_allchans(ppd, 0, (1 << 13), BMASK(13, 13)); 8026 msleep(20); 8027 8028 /* setup LoS params; these are subsystem, so chan == 5 */ 8029 /* LoS filter threshold_count on, ch 0-3, set to 8 */ 8030 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); 8031 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); 8032 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); 8033 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); 8034 8035 /* LoS filter threshold_count off, ch 0-3, set to 4 */ 8036 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); 8037 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); 8038 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); 8039 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); 8040 8041 /* LoS filter select enabled */ 8042 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); 8043 8044 /* LoS target data: SDR=4, DDR=2, QDR=1 */ 8045 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ 8046 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ 8047 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ 8048 8049 /* Turn on LOS on initial SERDES init */ 8050 serdes_7322_los_enable(ppd, 1); 8051 /* FLoop LOS gate: PPM filter enabled */ 8052 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); 8053 8054 /* RX LATCH CALIBRATION */ 8055 /* Enable Eyefinder Phase Calibration latch */ 8056 ibsd_wr_allchans(ppd, 15, 1, BMASK(0, 0)); 8057 /* Enable RX Offset Calibration latch */ 8058 ibsd_wr_allchans(ppd, 12, (1 << 4), BMASK(4, 4)); 8059 msleep(20); 8060 /* Start Calibration */ 8061 ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10)); 8062 tend = jiffies + msecs_to_jiffies(500); 8063 while (chan_done && !time_is_before_jiffies(tend)) { 8064 msleep(20); 8065 for (chan = 0; chan < SERDES_CHANS; ++chan) { 8066 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 8067 (chan + (chan >> 1)), 8068 25, 0, 0); 8069 if ((~rxcaldone & (u32)BMASK(9, 9)) == 0 && 8070 (~chan_done & (1 << chan)) == 0) 8071 chan_done &= ~(1 << chan); 8072 } 8073 } 8074 if (chan_done) { 8075 pr_info("Serdes %d calibration not done after .5 sec: 0x%x\n", 8076 IBSD(ppd->hw_pidx), chan_done); 8077 } else { 8078 for (chan = 0; chan < SERDES_CHANS; ++chan) { 8079 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 8080 (chan + (chan >> 1)), 8081 25, 0, 0); 8082 if ((~rxcaldone & (u32)BMASK(10, 10)) == 0) 8083 pr_info("Serdes %d chan %d calibration failed\n", 8084 IBSD(ppd->hw_pidx), chan); 8085 } 8086 } 8087 8088 /* Turn off Calibration */ 8089 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); 8090 msleep(20); 8091 8092 /* BRING RX UP */ 8093 /* Set LE2 value (May be overridden in qsfp_7322_event) */ 8094 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; 8095 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); 8096 /* Set LE2 Loop bandwidth */ 8097 ibsd_wr_allchans(ppd, 3, (7 << 5), BMASK(7, 5)); 8098 /* Enable LE2 */ 8099 ibsd_wr_allchans(ppd, 13, (1 << 6), BMASK(6, 6)); 8100 msleep(20); 8101 /* Enable H0 only */ 8102 ibsd_wr_allchans(ppd, 1, 1, BMASK(9, 1)); 8103 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ 8104 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; 8105 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); 8106 /* Enable VGA */ 8107 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); 8108 msleep(20); 8109 /* Set Frequency Loop Bandwidth */ 8110 ibsd_wr_allchans(ppd, 2, (15 << 5), BMASK(8, 5)); 8111 /* Enable Frequency Loop */ 8112 ibsd_wr_allchans(ppd, 2, (1 << 4), BMASK(4, 4)); 8113 /* Set Timing Loop Bandwidth */ 8114 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); 8115 /* Enable Timing Loop */ 8116 ibsd_wr_allchans(ppd, 2, (1 << 3), BMASK(3, 3)); 8117 msleep(50); 8118 /* Enable DFE 8119 * Set receive adaptation mode. SDR and DDR adaptation are 8120 * always on, and QDR is initially enabled; later disabled. 8121 */ 8122 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); 8123 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); 8124 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 8125 ppd->dd->cspec->r1 ? 8126 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); 8127 ppd->cpspec->qdr_dfe_on = 1; 8128 /* Disable LE1 */ 8129 ibsd_wr_allchans(ppd, 13, (0 << 5), (1 << 5)); 8130 /* Disable auto adapt for LE1 */ 8131 ibsd_wr_allchans(ppd, 1, (0 << 15), BMASK(15, 15)); 8132 msleep(20); 8133 /* Enable AFE Offset Cancel */ 8134 ibsd_wr_allchans(ppd, 12, (1 << 12), BMASK(12, 12)); 8135 /* Enable Baseline Wander Correction */ 8136 ibsd_wr_allchans(ppd, 12, (1 << 13), BMASK(13, 13)); 8137 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ 8138 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); 8139 /* VGA output common mode */ 8140 ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2)); 8141 8142 /* 8143 * Initialize the Tx DDS tables. Also done every QSFP event, 8144 * for adapters with QSFP 8145 */ 8146 init_txdds_table(ppd, 0); 8147 8148 return 0; 8149 } 8150 8151 /* start adjust QMH serdes parameters */ 8152 8153 static void set_man_code(struct qib_pportdata *ppd, int chan, int code) 8154 { 8155 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8156 9, code << 9, 0x3f << 9); 8157 } 8158 8159 static void set_man_mode_h1(struct qib_pportdata *ppd, int chan, 8160 int enable, u32 tapenable) 8161 { 8162 if (enable) 8163 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8164 1, 3 << 10, 0x1f << 10); 8165 else 8166 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8167 1, 0, 0x1f << 10); 8168 } 8169 8170 /* Set clock to 1, 0, 1, 0 */ 8171 static void clock_man(struct qib_pportdata *ppd, int chan) 8172 { 8173 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8174 4, 0x4000, 0x4000); 8175 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8176 4, 0, 0x4000); 8177 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8178 4, 0x4000, 0x4000); 8179 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8180 4, 0, 0x4000); 8181 } 8182 8183 /* 8184 * write the current Tx serdes pre,post,main,amp settings into the serdes. 8185 * The caller must pass the settings appropriate for the current speed, 8186 * or not care if they are correct for the current speed. 8187 */ 8188 static void write_tx_serdes_param(struct qib_pportdata *ppd, 8189 struct txdds_ent *txdds) 8190 { 8191 u64 deemph; 8192 8193 deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override); 8194 /* field names for amp, main, post, pre, respectively */ 8195 deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) | 8196 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) | 8197 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) | 8198 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena)); 8199 8200 deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8201 tx_override_deemphasis_select); 8202 deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8203 txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8204 txampcntl_d2a); 8205 deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8206 txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8207 txc0_ena); 8208 deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8209 txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8210 txcp1_ena); 8211 deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8212 txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8213 txcn1_ena); 8214 qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph); 8215 } 8216 8217 /* 8218 * Set the parameters for mez cards on link bounce, so they are 8219 * always exactly what was requested. Similar logic to init_txdds 8220 * but does just the serdes. 8221 */ 8222 static void adj_tx_serdes(struct qib_pportdata *ppd) 8223 { 8224 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; 8225 struct txdds_ent *dds; 8226 8227 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1); 8228 dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? 8229 qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ? 8230 ddr_dds : sdr_dds)); 8231 write_tx_serdes_param(ppd, dds); 8232 } 8233 8234 /* set QDR forced value for H1, if needed */ 8235 static void force_h1(struct qib_pportdata *ppd) 8236 { 8237 int chan; 8238 8239 ppd->cpspec->qdr_reforce = 0; 8240 if (!ppd->dd->cspec->r1) 8241 return; 8242 8243 for (chan = 0; chan < SERDES_CHANS; chan++) { 8244 set_man_mode_h1(ppd, chan, 1, 0); 8245 set_man_code(ppd, chan, ppd->cpspec->h1_val); 8246 clock_man(ppd, chan); 8247 set_man_mode_h1(ppd, chan, 0, 0); 8248 } 8249 } 8250 8251 #define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN) 8252 #define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en) 8253 8254 #define R_OPCODE_LSB 3 8255 #define R_OP_NOP 0 8256 #define R_OP_SHIFT 2 8257 #define R_OP_UPDATE 3 8258 #define R_TDI_LSB 2 8259 #define R_TDO_LSB 1 8260 #define R_RDY 1 8261 8262 static int qib_r_grab(struct qib_devdata *dd) 8263 { 8264 u64 val = SJA_EN; 8265 8266 qib_write_kreg(dd, kr_r_access, val); 8267 qib_read_kreg32(dd, kr_scratch); 8268 return 0; 8269 } 8270 8271 /* qib_r_wait_for_rdy() not only waits for the ready bit, it 8272 * returns the current state of R_TDO 8273 */ 8274 static int qib_r_wait_for_rdy(struct qib_devdata *dd) 8275 { 8276 u64 val; 8277 int timeout; 8278 8279 for (timeout = 0; timeout < 100 ; ++timeout) { 8280 val = qib_read_kreg32(dd, kr_r_access); 8281 if (val & R_RDY) 8282 return (val >> R_TDO_LSB) & 1; 8283 } 8284 return -1; 8285 } 8286 8287 static int qib_r_shift(struct qib_devdata *dd, int bisten, 8288 int len, u8 *inp, u8 *outp) 8289 { 8290 u64 valbase, val; 8291 int ret, pos; 8292 8293 valbase = SJA_EN | (bisten << BISTEN_LSB) | 8294 (R_OP_SHIFT << R_OPCODE_LSB); 8295 ret = qib_r_wait_for_rdy(dd); 8296 if (ret < 0) 8297 goto bail; 8298 for (pos = 0; pos < len; ++pos) { 8299 val = valbase; 8300 if (outp) { 8301 outp[pos >> 3] &= ~(1 << (pos & 7)); 8302 outp[pos >> 3] |= (ret << (pos & 7)); 8303 } 8304 if (inp) { 8305 int tdi = inp[pos >> 3] >> (pos & 7); 8306 8307 val |= ((tdi & 1) << R_TDI_LSB); 8308 } 8309 qib_write_kreg(dd, kr_r_access, val); 8310 qib_read_kreg32(dd, kr_scratch); 8311 ret = qib_r_wait_for_rdy(dd); 8312 if (ret < 0) 8313 break; 8314 } 8315 /* Restore to NOP between operations. */ 8316 val = SJA_EN | (bisten << BISTEN_LSB); 8317 qib_write_kreg(dd, kr_r_access, val); 8318 qib_read_kreg32(dd, kr_scratch); 8319 ret = qib_r_wait_for_rdy(dd); 8320 8321 if (ret >= 0) 8322 ret = pos; 8323 bail: 8324 return ret; 8325 } 8326 8327 static int qib_r_update(struct qib_devdata *dd, int bisten) 8328 { 8329 u64 val; 8330 int ret; 8331 8332 val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB); 8333 ret = qib_r_wait_for_rdy(dd); 8334 if (ret >= 0) { 8335 qib_write_kreg(dd, kr_r_access, val); 8336 qib_read_kreg32(dd, kr_scratch); 8337 } 8338 return ret; 8339 } 8340 8341 #define BISTEN_PORT_SEL 15 8342 #define LEN_PORT_SEL 625 8343 #define BISTEN_AT 17 8344 #define LEN_AT 156 8345 #define BISTEN_ETM 16 8346 #define LEN_ETM 632 8347 8348 #define BIT2BYTE(x) (((x) + BITS_PER_BYTE - 1) / BITS_PER_BYTE) 8349 8350 /* these are common for all IB port use cases. */ 8351 static u8 reset_at[BIT2BYTE(LEN_AT)] = { 8352 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8353 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 8354 }; 8355 static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = { 8356 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8357 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8358 0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e, 8359 0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7, 8360 0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70, 8361 0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00, 8362 0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8363 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 8364 }; 8365 static u8 at[BIT2BYTE(LEN_AT)] = { 8366 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 8367 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 8368 }; 8369 8370 /* used for IB1 or IB2, only one in use */ 8371 static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = { 8372 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8373 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8374 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8375 0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00, 8376 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8377 0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03, 8378 0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00, 8379 0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00, 8380 }; 8381 8382 /* used when both IB1 and IB2 are in use */ 8383 static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = { 8384 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8385 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79, 8386 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8387 0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05, 8388 0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 8389 0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07, 8390 0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00, 8391 0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, 8392 }; 8393 8394 /* used when only IB1 is in use */ 8395 static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = { 8396 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 8397 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 8398 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8399 0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8400 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 8401 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8402 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8403 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 8404 }; 8405 8406 /* used when only IB2 is in use */ 8407 static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = { 8408 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39, 8409 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32, 8410 0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 8411 0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 8412 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32, 8413 0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 8414 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 8415 0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 8416 }; 8417 8418 /* used when both IB1 and IB2 are in use */ 8419 static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = { 8420 0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 8421 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 8422 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8423 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8424 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 8425 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a, 8426 0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8427 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 8428 }; 8429 8430 /* 8431 * Do setup to properly handle IB link recovery; if port is zero, we 8432 * are initializing to cover both ports; otherwise we are initializing 8433 * to cover a single port card, or the port has reached INIT and we may 8434 * need to switch coverage types. 8435 */ 8436 static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both) 8437 { 8438 u8 *portsel, *etm; 8439 struct qib_devdata *dd = ppd->dd; 8440 8441 if (!ppd->dd->cspec->r1) 8442 return; 8443 if (!both) { 8444 dd->cspec->recovery_ports_initted++; 8445 ppd->cpspec->recovery_init = 1; 8446 } 8447 if (!both && dd->cspec->recovery_ports_initted == 1) { 8448 portsel = ppd->port == 1 ? portsel_port1 : portsel_port2; 8449 etm = atetm_1port; 8450 } else { 8451 portsel = portsel_2port; 8452 etm = atetm_2port; 8453 } 8454 8455 if (qib_r_grab(dd) < 0 || 8456 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 || 8457 qib_r_update(dd, BISTEN_ETM) < 0 || 8458 qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 || 8459 qib_r_update(dd, BISTEN_AT) < 0 || 8460 qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL, 8461 portsel, NULL) < 0 || 8462 qib_r_update(dd, BISTEN_PORT_SEL) < 0 || 8463 qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 || 8464 qib_r_update(dd, BISTEN_AT) < 0 || 8465 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 || 8466 qib_r_update(dd, BISTEN_ETM) < 0) 8467 qib_dev_err(dd, "Failed IB link recovery setup\n"); 8468 } 8469 8470 static void check_7322_rxe_status(struct qib_pportdata *ppd) 8471 { 8472 struct qib_devdata *dd = ppd->dd; 8473 u64 fmask; 8474 8475 if (dd->cspec->recovery_ports_initted != 1) 8476 return; /* rest doesn't apply to dualport */ 8477 qib_write_kreg(dd, kr_control, dd->control | 8478 SYM_MASK(Control, FreezeMode)); 8479 (void)qib_read_kreg64(dd, kr_scratch); 8480 udelay(3); /* ibcreset asserted 400ns, be sure that's over */ 8481 fmask = qib_read_kreg64(dd, kr_act_fmask); 8482 if (!fmask) { 8483 /* 8484 * require a powercycle before we'll work again, and make 8485 * sure we get no more interrupts, and don't turn off 8486 * freeze. 8487 */ 8488 ppd->dd->cspec->stay_in_freeze = 1; 8489 qib_7322_set_intr_state(ppd->dd, 0); 8490 qib_write_kreg(dd, kr_fmask, 0ULL); 8491 qib_dev_err(dd, "HCA unusable until powercycled\n"); 8492 return; /* eventually reset */ 8493 } 8494 8495 qib_write_kreg(ppd->dd, kr_hwerrclear, 8496 SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1)); 8497 8498 /* don't do the full clear_freeze(), not needed for this */ 8499 qib_write_kreg(dd, kr_control, dd->control); 8500 qib_read_kreg32(dd, kr_scratch); 8501 /* take IBC out of reset */ 8502 if (ppd->link_speed_supported) { 8503 ppd->cpspec->ibcctrl_a &= 8504 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 8505 qib_write_kreg_port(ppd, krp_ibcctrl_a, 8506 ppd->cpspec->ibcctrl_a); 8507 qib_read_kreg32(dd, kr_scratch); 8508 if (ppd->lflags & QIBL_IB_LINK_DISABLED) 8509 qib_set_ib_7322_lstate(ppd, 0, 8510 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 8511 } 8512 } 8513