1 /* 2 * Copyright (c) 2012 - 2017 Intel Corporation. All rights reserved. 3 * Copyright (c) 2008 - 2012 QLogic Corporation. All rights reserved. 4 * 5 * This software is available to you under a choice of one of two 6 * licenses. You may choose to be licensed under the terms of the GNU 7 * General Public License (GPL) Version 2, available from the file 8 * COPYING in the main directory of this source tree, or the 9 * OpenIB.org BSD license below: 10 * 11 * Redistribution and use in source and binary forms, with or 12 * without modification, are permitted provided that the following 13 * conditions are met: 14 * 15 * - Redistributions of source code must retain the above 16 * copyright notice, this list of conditions and the following 17 * disclaimer. 18 * 19 * - Redistributions in binary form must reproduce the above 20 * copyright notice, this list of conditions and the following 21 * disclaimer in the documentation and/or other materials 22 * provided with the distribution. 23 * 24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 31 * SOFTWARE. 32 */ 33 34 /* 35 * This file contains all of the code that is specific to the 36 * InfiniPath 7322 chip 37 */ 38 39 #include <linux/interrupt.h> 40 #include <linux/pci.h> 41 #include <linux/delay.h> 42 #include <linux/io.h> 43 #include <linux/jiffies.h> 44 #include <linux/module.h> 45 #include <rdma/ib_verbs.h> 46 #include <rdma/ib_smi.h> 47 #ifdef CONFIG_INFINIBAND_QIB_DCA 48 #include <linux/dca.h> 49 #endif 50 51 #include "qib.h" 52 #include "qib_7322_regs.h" 53 #include "qib_qsfp.h" 54 55 #include "qib_mad.h" 56 #include "qib_verbs.h" 57 58 #undef pr_fmt 59 #define pr_fmt(fmt) QIB_DRV_NAME " " fmt 60 61 static void qib_setup_7322_setextled(struct qib_pportdata *, u32); 62 static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t); 63 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op); 64 static irqreturn_t qib_7322intr(int irq, void *data); 65 static irqreturn_t qib_7322bufavail(int irq, void *data); 66 static irqreturn_t sdma_intr(int irq, void *data); 67 static irqreturn_t sdma_idle_intr(int irq, void *data); 68 static irqreturn_t sdma_progress_intr(int irq, void *data); 69 static irqreturn_t sdma_cleanup_intr(int irq, void *data); 70 static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32, 71 struct qib_ctxtdata *rcd); 72 static u8 qib_7322_phys_portstate(u64); 73 static u32 qib_7322_iblink_state(u64); 74 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, 75 u16 linitcmd); 76 static void force_h1(struct qib_pportdata *); 77 static void adj_tx_serdes(struct qib_pportdata *); 78 static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8); 79 static void qib_7322_mini_pcs_reset(struct qib_pportdata *); 80 81 static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32); 82 static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned); 83 static void serdes_7322_los_enable(struct qib_pportdata *, int); 84 static int serdes_7322_init_old(struct qib_pportdata *); 85 static int serdes_7322_init_new(struct qib_pportdata *); 86 static void dump_sdma_7322_state(struct qib_pportdata *); 87 88 #define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb)) 89 90 /* LE2 serdes values for different cases */ 91 #define LE2_DEFAULT 5 92 #define LE2_5m 4 93 #define LE2_QME 0 94 95 /* Below is special-purpose, so only really works for the IB SerDes blocks. */ 96 #define IBSD(hw_pidx) (hw_pidx + 2) 97 98 /* these are variables for documentation and experimentation purposes */ 99 static const unsigned rcv_int_timeout = 375; 100 static const unsigned rcv_int_count = 16; 101 static const unsigned sdma_idle_cnt = 64; 102 103 /* Time to stop altering Rx Equalization parameters, after link up. */ 104 #define RXEQ_DISABLE_MSECS 2500 105 106 /* 107 * Number of VLs we are configured to use (to allow for more 108 * credits per vl, etc.) 109 */ 110 ushort qib_num_cfg_vls = 2; 111 module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO); 112 MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)"); 113 114 static ushort qib_chase = 1; 115 module_param_named(chase, qib_chase, ushort, S_IRUGO); 116 MODULE_PARM_DESC(chase, "Enable state chase handling"); 117 118 static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */ 119 module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO); 120 MODULE_PARM_DESC(long_attenuation, 121 "attenuation cutoff (dB) for long copper cable setup"); 122 123 static ushort qib_singleport; 124 module_param_named(singleport, qib_singleport, ushort, S_IRUGO); 125 MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space"); 126 127 static ushort qib_krcvq01_no_msi; 128 module_param_named(krcvq01_no_msi, qib_krcvq01_no_msi, ushort, S_IRUGO); 129 MODULE_PARM_DESC(krcvq01_no_msi, "No MSI for kctx < 2"); 130 131 /* 132 * Receive header queue sizes 133 */ 134 static unsigned qib_rcvhdrcnt; 135 module_param_named(rcvhdrcnt, qib_rcvhdrcnt, uint, S_IRUGO); 136 MODULE_PARM_DESC(rcvhdrcnt, "receive header count"); 137 138 static unsigned qib_rcvhdrsize; 139 module_param_named(rcvhdrsize, qib_rcvhdrsize, uint, S_IRUGO); 140 MODULE_PARM_DESC(rcvhdrsize, "receive header size in 32-bit words"); 141 142 static unsigned qib_rcvhdrentsize; 143 module_param_named(rcvhdrentsize, qib_rcvhdrentsize, uint, S_IRUGO); 144 MODULE_PARM_DESC(rcvhdrentsize, "receive header entry size in 32-bit words"); 145 146 #define MAX_ATTEN_LEN 64 /* plenty for any real system */ 147 /* for read back, default index is ~5m copper cable */ 148 static char txselect_list[MAX_ATTEN_LEN] = "10"; 149 static struct kparam_string kp_txselect = { 150 .string = txselect_list, 151 .maxlen = MAX_ATTEN_LEN 152 }; 153 static int setup_txselect(const char *, const struct kernel_param *); 154 module_param_call(txselect, setup_txselect, param_get_string, 155 &kp_txselect, S_IWUSR | S_IRUGO); 156 MODULE_PARM_DESC(txselect, 157 "Tx serdes indices (for no QSFP or invalid QSFP data)"); 158 159 #define BOARD_QME7342 5 160 #define BOARD_QMH7342 6 161 #define BOARD_QMH7360 9 162 #define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ 163 BOARD_QMH7342) 164 #define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ 165 BOARD_QME7342) 166 167 #define KREG_IDX(regname) (QIB_7322_##regname##_OFFS / sizeof(u64)) 168 169 #define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64))) 170 171 #define MASK_ACROSS(lsb, msb) \ 172 (((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb)) 173 174 #define SYM_RMASK(regname, fldname) ((u64) \ 175 QIB_7322_##regname##_##fldname##_RMASK) 176 177 #define SYM_MASK(regname, fldname) ((u64) \ 178 QIB_7322_##regname##_##fldname##_RMASK << \ 179 QIB_7322_##regname##_##fldname##_LSB) 180 181 #define SYM_FIELD(value, regname, fldname) ((u64) \ 182 (((value) >> SYM_LSB(regname, fldname)) & \ 183 SYM_RMASK(regname, fldname))) 184 185 /* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */ 186 #define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \ 187 (((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits)) 188 189 #define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) 190 #define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) 191 #define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask) 192 #define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask) 193 #define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port) 194 /* Below because most, but not all, fields of IntMask have that full suffix */ 195 #define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port) 196 197 198 #define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB) 199 200 /* 201 * the size bits give us 2^N, in KB units. 0 marks as invalid, 202 * and 7 is reserved. We currently use only 2KB and 4KB 203 */ 204 #define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB 205 #define IBA7322_TID_SZ_2K (1UL<<IBA7322_TID_SZ_SHIFT) /* 2KB */ 206 #define IBA7322_TID_SZ_4K (2UL<<IBA7322_TID_SZ_SHIFT) /* 4KB */ 207 #define IBA7322_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */ 208 209 #define SendIBSLIDAssignMask \ 210 QIB_7322_SendIBSLIDAssign_0_SendIBSLIDAssign_15_0_RMASK 211 #define SendIBSLMCMask \ 212 QIB_7322_SendIBSLIDMask_0_SendIBSLIDMask_15_0_RMASK 213 214 #define ExtLED_IB1_YEL SYM_MASK(EXTCtrl, LEDPort0YellowOn) 215 #define ExtLED_IB1_GRN SYM_MASK(EXTCtrl, LEDPort0GreenOn) 216 #define ExtLED_IB2_YEL SYM_MASK(EXTCtrl, LEDPort1YellowOn) 217 #define ExtLED_IB2_GRN SYM_MASK(EXTCtrl, LEDPort1GreenOn) 218 #define ExtLED_IB1_MASK (ExtLED_IB1_YEL | ExtLED_IB1_GRN) 219 #define ExtLED_IB2_MASK (ExtLED_IB2_YEL | ExtLED_IB2_GRN) 220 221 #define _QIB_GPIO_SDA_NUM 1 222 #define _QIB_GPIO_SCL_NUM 0 223 #define QIB_EEPROM_WEN_NUM 14 224 #define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7322 cards. */ 225 226 /* HW counter clock is at 4nsec */ 227 #define QIB_7322_PSXMITWAIT_CHECK_RATE 4000 228 229 /* full speed IB port 1 only */ 230 #define PORT_SPD_CAP (QIB_IB_SDR | QIB_IB_DDR | QIB_IB_QDR) 231 #define PORT_SPD_CAP_SHIFT 3 232 233 /* full speed featuremask, both ports */ 234 #define DUAL_PORT_CAP (PORT_SPD_CAP | (PORT_SPD_CAP << PORT_SPD_CAP_SHIFT)) 235 236 /* 237 * This file contains almost all the chip-specific register information and 238 * access functions for the FAKED QLogic InfiniPath 7322 PCI-Express chip. 239 */ 240 241 /* Use defines to tie machine-generated names to lower-case names */ 242 #define kr_contextcnt KREG_IDX(ContextCnt) 243 #define kr_control KREG_IDX(Control) 244 #define kr_counterregbase KREG_IDX(CntrRegBase) 245 #define kr_errclear KREG_IDX(ErrClear) 246 #define kr_errmask KREG_IDX(ErrMask) 247 #define kr_errstatus KREG_IDX(ErrStatus) 248 #define kr_extctrl KREG_IDX(EXTCtrl) 249 #define kr_extstatus KREG_IDX(EXTStatus) 250 #define kr_gpio_clear KREG_IDX(GPIOClear) 251 #define kr_gpio_mask KREG_IDX(GPIOMask) 252 #define kr_gpio_out KREG_IDX(GPIOOut) 253 #define kr_gpio_status KREG_IDX(GPIOStatus) 254 #define kr_hwdiagctrl KREG_IDX(HwDiagCtrl) 255 #define kr_debugportval KREG_IDX(DebugPortValueReg) 256 #define kr_fmask KREG_IDX(feature_mask) 257 #define kr_act_fmask KREG_IDX(active_feature_mask) 258 #define kr_hwerrclear KREG_IDX(HwErrClear) 259 #define kr_hwerrmask KREG_IDX(HwErrMask) 260 #define kr_hwerrstatus KREG_IDX(HwErrStatus) 261 #define kr_intclear KREG_IDX(IntClear) 262 #define kr_intmask KREG_IDX(IntMask) 263 #define kr_intredirect KREG_IDX(IntRedirect0) 264 #define kr_intstatus KREG_IDX(IntStatus) 265 #define kr_pagealign KREG_IDX(PageAlign) 266 #define kr_rcvavailtimeout KREG_IDX(RcvAvailTimeOut0) 267 #define kr_rcvctrl KREG_IDX(RcvCtrl) /* Common, but chip also has per-port */ 268 #define kr_rcvegrbase KREG_IDX(RcvEgrBase) 269 #define kr_rcvegrcnt KREG_IDX(RcvEgrCnt) 270 #define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt) 271 #define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize) 272 #define kr_rcvhdrsize KREG_IDX(RcvHdrSize) 273 #define kr_rcvtidbase KREG_IDX(RcvTIDBase) 274 #define kr_rcvtidcnt KREG_IDX(RcvTIDCnt) 275 #define kr_revision KREG_IDX(Revision) 276 #define kr_scratch KREG_IDX(Scratch) 277 #define kr_sendbuffererror KREG_IDX(SendBufErr0) /* and base for 1 and 2 */ 278 #define kr_sendcheckmask KREG_IDX(SendCheckMask0) /* and 1, 2 */ 279 #define kr_sendctrl KREG_IDX(SendCtrl) 280 #define kr_sendgrhcheckmask KREG_IDX(SendGRHCheckMask0) /* and 1, 2 */ 281 #define kr_sendibpktmask KREG_IDX(SendIBPacketMask0) /* and 1, 2 */ 282 #define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr) 283 #define kr_sendpiobufbase KREG_IDX(SendBufBase) 284 #define kr_sendpiobufcnt KREG_IDX(SendBufCnt) 285 #define kr_sendpiosize KREG_IDX(SendBufSize) 286 #define kr_sendregbase KREG_IDX(SendRegBase) 287 #define kr_sendbufavail0 KREG_IDX(SendBufAvail0) 288 #define kr_userregbase KREG_IDX(UserRegBase) 289 #define kr_intgranted KREG_IDX(Int_Granted) 290 #define kr_vecclr_wo_int KREG_IDX(vec_clr_without_int) 291 #define kr_intblocked KREG_IDX(IntBlocked) 292 #define kr_r_access KREG_IDX(SPC_JTAG_ACCESS_REG) 293 294 /* 295 * per-port kernel registers. Access only with qib_read_kreg_port() 296 * or qib_write_kreg_port() 297 */ 298 #define krp_errclear KREG_IBPORT_IDX(ErrClear) 299 #define krp_errmask KREG_IBPORT_IDX(ErrMask) 300 #define krp_errstatus KREG_IBPORT_IDX(ErrStatus) 301 #define krp_highprio_0 KREG_IBPORT_IDX(HighPriority0) 302 #define krp_highprio_limit KREG_IBPORT_IDX(HighPriorityLimit) 303 #define krp_hrtbt_guid KREG_IBPORT_IDX(HRTBT_GUID) 304 #define krp_ib_pcsconfig KREG_IBPORT_IDX(IBPCSConfig) 305 #define krp_ibcctrl_a KREG_IBPORT_IDX(IBCCtrlA) 306 #define krp_ibcctrl_b KREG_IBPORT_IDX(IBCCtrlB) 307 #define krp_ibcctrl_c KREG_IBPORT_IDX(IBCCtrlC) 308 #define krp_ibcstatus_a KREG_IBPORT_IDX(IBCStatusA) 309 #define krp_ibcstatus_b KREG_IBPORT_IDX(IBCStatusB) 310 #define krp_txestatus KREG_IBPORT_IDX(TXEStatus) 311 #define krp_lowprio_0 KREG_IBPORT_IDX(LowPriority0) 312 #define krp_ncmodectrl KREG_IBPORT_IDX(IBNCModeCtrl) 313 #define krp_partitionkey KREG_IBPORT_IDX(RcvPartitionKey) 314 #define krp_psinterval KREG_IBPORT_IDX(PSInterval) 315 #define krp_psstart KREG_IBPORT_IDX(PSStart) 316 #define krp_psstat KREG_IBPORT_IDX(PSStat) 317 #define krp_rcvbthqp KREG_IBPORT_IDX(RcvBTHQP) 318 #define krp_rcvctrl KREG_IBPORT_IDX(RcvCtrl) 319 #define krp_rcvpktledcnt KREG_IBPORT_IDX(RcvPktLEDCnt) 320 #define krp_rcvqpmaptable KREG_IBPORT_IDX(RcvQPMapTableA) 321 #define krp_rxcreditvl0 KREG_IBPORT_IDX(RxCreditVL0) 322 #define krp_rxcreditvl15 (KREG_IBPORT_IDX(RxCreditVL0)+15) 323 #define krp_sendcheckcontrol KREG_IBPORT_IDX(SendCheckControl) 324 #define krp_sendctrl KREG_IBPORT_IDX(SendCtrl) 325 #define krp_senddmabase KREG_IBPORT_IDX(SendDmaBase) 326 #define krp_senddmabufmask0 KREG_IBPORT_IDX(SendDmaBufMask0) 327 #define krp_senddmabufmask1 (KREG_IBPORT_IDX(SendDmaBufMask0) + 1) 328 #define krp_senddmabufmask2 (KREG_IBPORT_IDX(SendDmaBufMask0) + 2) 329 #define krp_senddmabuf_use0 KREG_IBPORT_IDX(SendDmaBufUsed0) 330 #define krp_senddmabuf_use1 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 1) 331 #define krp_senddmabuf_use2 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 2) 332 #define krp_senddmadesccnt KREG_IBPORT_IDX(SendDmaDescCnt) 333 #define krp_senddmahead KREG_IBPORT_IDX(SendDmaHead) 334 #define krp_senddmaheadaddr KREG_IBPORT_IDX(SendDmaHeadAddr) 335 #define krp_senddmaidlecnt KREG_IBPORT_IDX(SendDmaIdleCnt) 336 #define krp_senddmalengen KREG_IBPORT_IDX(SendDmaLenGen) 337 #define krp_senddmaprioritythld KREG_IBPORT_IDX(SendDmaPriorityThld) 338 #define krp_senddmareloadcnt KREG_IBPORT_IDX(SendDmaReloadCnt) 339 #define krp_senddmastatus KREG_IBPORT_IDX(SendDmaStatus) 340 #define krp_senddmatail KREG_IBPORT_IDX(SendDmaTail) 341 #define krp_sendhdrsymptom KREG_IBPORT_IDX(SendHdrErrSymptom) 342 #define krp_sendslid KREG_IBPORT_IDX(SendIBSLIDAssign) 343 #define krp_sendslidmask KREG_IBPORT_IDX(SendIBSLIDMask) 344 #define krp_ibsdtestiftx KREG_IBPORT_IDX(IB_SDTEST_IF_TX) 345 #define krp_adapt_dis_timer KREG_IBPORT_IDX(ADAPT_DISABLE_TIMER_THRESHOLD) 346 #define krp_tx_deemph_override KREG_IBPORT_IDX(IBSD_TX_DEEMPHASIS_OVERRIDE) 347 #define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl) 348 349 /* 350 * Per-context kernel registers. Access only with qib_read_kreg_ctxt() 351 * or qib_write_kreg_ctxt() 352 */ 353 #define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0) 354 #define krc_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0) 355 356 /* 357 * TID Flow table, per context. Reduces 358 * number of hdrq updates to one per flow (or on errors). 359 * context 0 and 1 share same memory, but have distinct 360 * addresses. Since for now, we never use expected sends 361 * on kernel contexts, we don't worry about that (we initialize 362 * those entries for ctxt 0/1 on driver load twice, for example). 363 */ 364 #define NUM_TIDFLOWS_CTXT 0x20 /* 0x20 per context; have to hardcode */ 365 #define ur_rcvflowtable (KREG_IDX(RcvTIDFlowTable0) - KREG_IDX(RcvHdrTail0)) 366 367 /* these are the error bits in the tid flows, and are W1C */ 368 #define TIDFLOW_ERRBITS ( \ 369 (SYM_MASK(RcvTIDFlowTable0, GenMismatch) << \ 370 SYM_LSB(RcvTIDFlowTable0, GenMismatch)) | \ 371 (SYM_MASK(RcvTIDFlowTable0, SeqMismatch) << \ 372 SYM_LSB(RcvTIDFlowTable0, SeqMismatch))) 373 374 /* Most (not all) Counters are per-IBport. 375 * Requires LBIntCnt is at offset 0 in the group 376 */ 377 #define CREG_IDX(regname) \ 378 ((QIB_7322_##regname##_0_OFFS - QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) 379 380 #define crp_badformat CREG_IDX(RxVersionErrCnt) 381 #define crp_err_rlen CREG_IDX(RxLenErrCnt) 382 #define crp_erricrc CREG_IDX(RxICRCErrCnt) 383 #define crp_errlink CREG_IDX(RxLinkMalformCnt) 384 #define crp_errlpcrc CREG_IDX(RxLPCRCErrCnt) 385 #define crp_errpkey CREG_IDX(RxPKeyMismatchCnt) 386 #define crp_errvcrc CREG_IDX(RxVCRCErrCnt) 387 #define crp_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt) 388 #define crp_iblinkdown CREG_IDX(IBLinkDownedCnt) 389 #define crp_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt) 390 #define crp_ibstatuschange CREG_IDX(IBStatusChangeCnt) 391 #define crp_ibsymbolerr CREG_IDX(IBSymbolErrCnt) 392 #define crp_invalidrlen CREG_IDX(RxMaxMinLenErrCnt) 393 #define crp_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt) 394 #define crp_pktrcv CREG_IDX(RxDataPktCnt) 395 #define crp_pktrcvflowctrl CREG_IDX(RxFlowPktCnt) 396 #define crp_pktsend CREG_IDX(TxDataPktCnt) 397 #define crp_pktsendflow CREG_IDX(TxFlowPktCnt) 398 #define crp_psrcvdatacount CREG_IDX(PSRcvDataCount) 399 #define crp_psrcvpktscount CREG_IDX(PSRcvPktsCount) 400 #define crp_psxmitdatacount CREG_IDX(PSXmitDataCount) 401 #define crp_psxmitpktscount CREG_IDX(PSXmitPktsCount) 402 #define crp_psxmitwaitcount CREG_IDX(PSXmitWaitCount) 403 #define crp_rcvebp CREG_IDX(RxEBPCnt) 404 #define crp_rcvflowctrlviol CREG_IDX(RxFlowCtrlViolCnt) 405 #define crp_rcvovfl CREG_IDX(RxBufOvflCnt) 406 #define crp_rxdlidfltr CREG_IDX(RxDlidFltrCnt) 407 #define crp_rxdroppkt CREG_IDX(RxDroppedPktCnt) 408 #define crp_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt) 409 #define crp_rxqpinvalidctxt CREG_IDX(RxQPInvalidContextCnt) 410 #define crp_rxvlerr CREG_IDX(RxVlErrCnt) 411 #define crp_sendstall CREG_IDX(TxFlowStallCnt) 412 #define crp_txdroppedpkt CREG_IDX(TxDroppedPktCnt) 413 #define crp_txhdrerr CREG_IDX(TxHeadersErrCnt) 414 #define crp_txlenerr CREG_IDX(TxLenErrCnt) 415 #define crp_txminmaxlenerr CREG_IDX(TxMaxMinLenErrCnt) 416 #define crp_txsdmadesc CREG_IDX(TxSDmaDescCnt) 417 #define crp_txunderrun CREG_IDX(TxUnderrunCnt) 418 #define crp_txunsupvl CREG_IDX(TxUnsupVLErrCnt) 419 #define crp_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt) 420 #define crp_wordrcv CREG_IDX(RxDwordCnt) 421 #define crp_wordsend CREG_IDX(TxDwordCnt) 422 #define crp_tx_creditstalls CREG_IDX(TxCreditUpToDateTimeOut) 423 424 /* these are the (few) counters that are not port-specific */ 425 #define CREG_DEVIDX(regname) ((QIB_7322_##regname##_OFFS - \ 426 QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) 427 #define cr_base_egrovfl CREG_DEVIDX(RxP0HdrEgrOvflCnt) 428 #define cr_lbint CREG_DEVIDX(LBIntCnt) 429 #define cr_lbstall CREG_DEVIDX(LBFlowStallCnt) 430 #define cr_pcieretrydiag CREG_DEVIDX(PcieRetryBufDiagQwordCnt) 431 #define cr_rxtidflowdrop CREG_DEVIDX(RxTidFlowDropCnt) 432 #define cr_tidfull CREG_DEVIDX(RxTIDFullErrCnt) 433 #define cr_tidinvalid CREG_DEVIDX(RxTIDValidErrCnt) 434 435 /* no chip register for # of IB ports supported, so define */ 436 #define NUM_IB_PORTS 2 437 438 /* 1 VL15 buffer per hardware IB port, no register for this, so define */ 439 #define NUM_VL15_BUFS NUM_IB_PORTS 440 441 /* 442 * context 0 and 1 are special, and there is no chip register that 443 * defines this value, so we have to define it here. 444 * These are all allocated to either 0 or 1 for single port 445 * hardware configuration, otherwise each gets half 446 */ 447 #define KCTXT0_EGRCNT 2048 448 449 /* values for vl and port fields in PBC, 7322-specific */ 450 #define PBC_PORT_SEL_LSB 26 451 #define PBC_PORT_SEL_RMASK 1 452 #define PBC_VL_NUM_LSB 27 453 #define PBC_VL_NUM_RMASK 7 454 #define PBC_7322_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */ 455 #define PBC_7322_VL15_SEND_CTRL (1ULL << 31) /* control version of same */ 456 457 static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { 458 [IB_RATE_2_5_GBPS] = 16, 459 [IB_RATE_5_GBPS] = 8, 460 [IB_RATE_10_GBPS] = 4, 461 [IB_RATE_20_GBPS] = 2, 462 [IB_RATE_30_GBPS] = 2, 463 [IB_RATE_40_GBPS] = 1 464 }; 465 466 static const char * const qib_sdma_state_names[] = { 467 [qib_sdma_state_s00_hw_down] = "s00_HwDown", 468 [qib_sdma_state_s10_hw_start_up_wait] = "s10_HwStartUpWait", 469 [qib_sdma_state_s20_idle] = "s20_Idle", 470 [qib_sdma_state_s30_sw_clean_up_wait] = "s30_SwCleanUpWait", 471 [qib_sdma_state_s40_hw_clean_up_wait] = "s40_HwCleanUpWait", 472 [qib_sdma_state_s50_hw_halt_wait] = "s50_HwHaltWait", 473 [qib_sdma_state_s99_running] = "s99_Running", 474 }; 475 476 #define IBA7322_LINKSPEED_SHIFT SYM_LSB(IBCStatusA_0, LinkSpeedActive) 477 #define IBA7322_LINKWIDTH_SHIFT SYM_LSB(IBCStatusA_0, LinkWidthActive) 478 479 /* link training states, from IBC */ 480 #define IB_7322_LT_STATE_DISABLED 0x00 481 #define IB_7322_LT_STATE_LINKUP 0x01 482 #define IB_7322_LT_STATE_POLLACTIVE 0x02 483 #define IB_7322_LT_STATE_POLLQUIET 0x03 484 #define IB_7322_LT_STATE_SLEEPDELAY 0x04 485 #define IB_7322_LT_STATE_SLEEPQUIET 0x05 486 #define IB_7322_LT_STATE_CFGDEBOUNCE 0x08 487 #define IB_7322_LT_STATE_CFGRCVFCFG 0x09 488 #define IB_7322_LT_STATE_CFGWAITRMT 0x0a 489 #define IB_7322_LT_STATE_CFGIDLE 0x0b 490 #define IB_7322_LT_STATE_RECOVERRETRAIN 0x0c 491 #define IB_7322_LT_STATE_TXREVLANES 0x0d 492 #define IB_7322_LT_STATE_RECOVERWAITRMT 0x0e 493 #define IB_7322_LT_STATE_RECOVERIDLE 0x0f 494 #define IB_7322_LT_STATE_CFGENH 0x10 495 #define IB_7322_LT_STATE_CFGTEST 0x11 496 #define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12 497 #define IB_7322_LT_STATE_CFGWAITENH 0x13 498 499 /* link state machine states from IBC */ 500 #define IB_7322_L_STATE_DOWN 0x0 501 #define IB_7322_L_STATE_INIT 0x1 502 #define IB_7322_L_STATE_ARM 0x2 503 #define IB_7322_L_STATE_ACTIVE 0x3 504 #define IB_7322_L_STATE_ACT_DEFER 0x4 505 506 static const u8 qib_7322_physportstate[0x20] = { 507 [IB_7322_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, 508 [IB_7322_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, 509 [IB_7322_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, 510 [IB_7322_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, 511 [IB_7322_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, 512 [IB_7322_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, 513 [IB_7322_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN, 514 [IB_7322_LT_STATE_CFGRCVFCFG] = 515 IB_PHYSPORTSTATE_CFG_TRAIN, 516 [IB_7322_LT_STATE_CFGWAITRMT] = 517 IB_PHYSPORTSTATE_CFG_TRAIN, 518 [IB_7322_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_IDLE, 519 [IB_7322_LT_STATE_RECOVERRETRAIN] = 520 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 521 [IB_7322_LT_STATE_RECOVERWAITRMT] = 522 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 523 [IB_7322_LT_STATE_RECOVERIDLE] = 524 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 525 [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH, 526 [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN, 527 [IB_7322_LT_STATE_CFGWAITRMTTEST] = 528 IB_PHYSPORTSTATE_CFG_TRAIN, 529 [IB_7322_LT_STATE_CFGWAITENH] = 530 IB_PHYSPORTSTATE_CFG_WAIT_ENH, 531 [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, 532 [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, 533 [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, 534 [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN 535 }; 536 537 #ifdef CONFIG_INFINIBAND_QIB_DCA 538 struct qib_irq_notify { 539 int rcv; 540 void *arg; 541 struct irq_affinity_notify notify; 542 }; 543 #endif 544 545 struct qib_chip_specific { 546 u64 __iomem *cregbase; 547 u64 *cntrs; 548 spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */ 549 spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */ 550 u64 main_int_mask; /* clear bits which have dedicated handlers */ 551 u64 int_enable_mask; /* for per port interrupts in single port mode */ 552 u64 errormask; 553 u64 hwerrmask; 554 u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */ 555 u64 gpio_mask; /* shadow the gpio mask register */ 556 u64 extctrl; /* shadow the gpio output enable, etc... */ 557 u32 ncntrs; 558 u32 nportcntrs; 559 u32 cntrnamelen; 560 u32 portcntrnamelen; 561 u32 numctxts; 562 u32 rcvegrcnt; 563 u32 updthresh; /* current AvailUpdThld */ 564 u32 updthresh_dflt; /* default AvailUpdThld */ 565 u32 r1; 566 u32 num_msix_entries; 567 u32 sdmabufcnt; 568 u32 lastbuf_for_pio; 569 u32 stay_in_freeze; 570 u32 recovery_ports_initted; 571 #ifdef CONFIG_INFINIBAND_QIB_DCA 572 u32 dca_ctrl; 573 int rhdr_cpu[18]; 574 int sdma_cpu[2]; 575 u64 dca_rcvhdr_ctrl[5]; /* B, C, D, E, F */ 576 #endif 577 struct qib_msix_entry *msix_entries; 578 unsigned long *sendchkenable; 579 unsigned long *sendgrhchk; 580 unsigned long *sendibchk; 581 u32 rcvavail_timeout[18]; 582 char emsgbuf[128]; /* for device error interrupt msg buffer */ 583 }; 584 585 /* Table of entries in "human readable" form Tx Emphasis. */ 586 struct txdds_ent { 587 u8 amp; 588 u8 pre; 589 u8 main; 590 u8 post; 591 }; 592 593 struct vendor_txdds_ent { 594 u8 oui[QSFP_VOUI_LEN]; 595 u8 *partnum; 596 struct txdds_ent sdr; 597 struct txdds_ent ddr; 598 struct txdds_ent qdr; 599 }; 600 601 static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *); 602 603 #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */ 604 #define TXDDS_EXTRA_SZ 18 /* number of extra tx settings entries */ 605 #define TXDDS_MFG_SZ 2 /* number of mfg tx settings entries */ 606 #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */ 607 608 #define H1_FORCE_VAL 8 609 #define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */ 610 #define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */ 611 612 /* The static and dynamic registers are paired, and the pairs indexed by spd */ 613 #define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \ 614 + ((spd) * 2)) 615 616 #define QDR_DFE_DISABLE_DELAY 4000 /* msec after LINKUP */ 617 #define QDR_STATIC_ADAPT_DOWN 0xf0f0f0f0ULL /* link down, H1-H4 QDR adapts */ 618 #define QDR_STATIC_ADAPT_DOWN_R1 0ULL /* r1 link down, H1-H4 QDR adapts */ 619 #define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */ 620 #define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */ 621 622 struct qib_chippport_specific { 623 u64 __iomem *kpregbase; 624 u64 __iomem *cpregbase; 625 u64 *portcntrs; 626 struct qib_pportdata *ppd; 627 wait_queue_head_t autoneg_wait; 628 struct delayed_work autoneg_work; 629 struct delayed_work ipg_work; 630 struct timer_list chase_timer; 631 /* 632 * these 5 fields are used to establish deltas for IB symbol 633 * errors and linkrecovery errors. They can be reported on 634 * some chips during link negotiation prior to INIT, and with 635 * DDR when faking DDR negotiations with non-IBTA switches. 636 * The chip counters are adjusted at driver unload if there is 637 * a non-zero delta. 638 */ 639 u64 ibdeltainprog; 640 u64 ibsymdelta; 641 u64 ibsymsnap; 642 u64 iblnkerrdelta; 643 u64 iblnkerrsnap; 644 u64 iblnkdownsnap; 645 u64 iblnkdowndelta; 646 u64 ibmalfdelta; 647 u64 ibmalfsnap; 648 u64 ibcctrl_a; /* krp_ibcctrl_a shadow */ 649 u64 ibcctrl_b; /* krp_ibcctrl_b shadow */ 650 unsigned long qdr_dfe_time; 651 unsigned long chase_end; 652 u32 autoneg_tries; 653 u32 recovery_init; 654 u32 qdr_dfe_on; 655 u32 qdr_reforce; 656 /* 657 * Per-bay per-channel rcv QMH H1 values and Tx values for QDR. 658 * entry zero is unused, to simplify indexing 659 */ 660 u8 h1_val; 661 u8 no_eep; /* txselect table index to use if no qsfp info */ 662 u8 ipg_tries; 663 u8 ibmalfusesnap; 664 struct qib_qsfp_data qsfp_data; 665 char epmsgbuf[192]; /* for port error interrupt msg buffer */ 666 char sdmamsgbuf[192]; /* for per-port sdma error messages */ 667 }; 668 669 static struct { 670 const char *name; 671 irq_handler_t handler; 672 int lsb; 673 int port; /* 0 if not port-specific, else port # */ 674 int dca; 675 } irq_table[] = { 676 { "", qib_7322intr, -1, 0, 0 }, 677 { " (buf avail)", qib_7322bufavail, 678 SYM_LSB(IntStatus, SendBufAvail), 0, 0}, 679 { " (sdma 0)", sdma_intr, 680 SYM_LSB(IntStatus, SDmaInt_0), 1, 1 }, 681 { " (sdma 1)", sdma_intr, 682 SYM_LSB(IntStatus, SDmaInt_1), 2, 1 }, 683 { " (sdmaI 0)", sdma_idle_intr, 684 SYM_LSB(IntStatus, SDmaIdleInt_0), 1, 1}, 685 { " (sdmaI 1)", sdma_idle_intr, 686 SYM_LSB(IntStatus, SDmaIdleInt_1), 2, 1}, 687 { " (sdmaP 0)", sdma_progress_intr, 688 SYM_LSB(IntStatus, SDmaProgressInt_0), 1, 1 }, 689 { " (sdmaP 1)", sdma_progress_intr, 690 SYM_LSB(IntStatus, SDmaProgressInt_1), 2, 1 }, 691 { " (sdmaC 0)", sdma_cleanup_intr, 692 SYM_LSB(IntStatus, SDmaCleanupDone_0), 1, 0 }, 693 { " (sdmaC 1)", sdma_cleanup_intr, 694 SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 , 0}, 695 }; 696 697 #ifdef CONFIG_INFINIBAND_QIB_DCA 698 699 static const struct dca_reg_map { 700 int shadow_inx; 701 int lsb; 702 u64 mask; 703 u16 regno; 704 } dca_rcvhdr_reg_map[] = { 705 { 0, SYM_LSB(DCACtrlB, RcvHdrq0DCAOPH), 706 ~SYM_MASK(DCACtrlB, RcvHdrq0DCAOPH) , KREG_IDX(DCACtrlB) }, 707 { 0, SYM_LSB(DCACtrlB, RcvHdrq1DCAOPH), 708 ~SYM_MASK(DCACtrlB, RcvHdrq1DCAOPH) , KREG_IDX(DCACtrlB) }, 709 { 0, SYM_LSB(DCACtrlB, RcvHdrq2DCAOPH), 710 ~SYM_MASK(DCACtrlB, RcvHdrq2DCAOPH) , KREG_IDX(DCACtrlB) }, 711 { 0, SYM_LSB(DCACtrlB, RcvHdrq3DCAOPH), 712 ~SYM_MASK(DCACtrlB, RcvHdrq3DCAOPH) , KREG_IDX(DCACtrlB) }, 713 { 1, SYM_LSB(DCACtrlC, RcvHdrq4DCAOPH), 714 ~SYM_MASK(DCACtrlC, RcvHdrq4DCAOPH) , KREG_IDX(DCACtrlC) }, 715 { 1, SYM_LSB(DCACtrlC, RcvHdrq5DCAOPH), 716 ~SYM_MASK(DCACtrlC, RcvHdrq5DCAOPH) , KREG_IDX(DCACtrlC) }, 717 { 1, SYM_LSB(DCACtrlC, RcvHdrq6DCAOPH), 718 ~SYM_MASK(DCACtrlC, RcvHdrq6DCAOPH) , KREG_IDX(DCACtrlC) }, 719 { 1, SYM_LSB(DCACtrlC, RcvHdrq7DCAOPH), 720 ~SYM_MASK(DCACtrlC, RcvHdrq7DCAOPH) , KREG_IDX(DCACtrlC) }, 721 { 2, SYM_LSB(DCACtrlD, RcvHdrq8DCAOPH), 722 ~SYM_MASK(DCACtrlD, RcvHdrq8DCAOPH) , KREG_IDX(DCACtrlD) }, 723 { 2, SYM_LSB(DCACtrlD, RcvHdrq9DCAOPH), 724 ~SYM_MASK(DCACtrlD, RcvHdrq9DCAOPH) , KREG_IDX(DCACtrlD) }, 725 { 2, SYM_LSB(DCACtrlD, RcvHdrq10DCAOPH), 726 ~SYM_MASK(DCACtrlD, RcvHdrq10DCAOPH) , KREG_IDX(DCACtrlD) }, 727 { 2, SYM_LSB(DCACtrlD, RcvHdrq11DCAOPH), 728 ~SYM_MASK(DCACtrlD, RcvHdrq11DCAOPH) , KREG_IDX(DCACtrlD) }, 729 { 3, SYM_LSB(DCACtrlE, RcvHdrq12DCAOPH), 730 ~SYM_MASK(DCACtrlE, RcvHdrq12DCAOPH) , KREG_IDX(DCACtrlE) }, 731 { 3, SYM_LSB(DCACtrlE, RcvHdrq13DCAOPH), 732 ~SYM_MASK(DCACtrlE, RcvHdrq13DCAOPH) , KREG_IDX(DCACtrlE) }, 733 { 3, SYM_LSB(DCACtrlE, RcvHdrq14DCAOPH), 734 ~SYM_MASK(DCACtrlE, RcvHdrq14DCAOPH) , KREG_IDX(DCACtrlE) }, 735 { 3, SYM_LSB(DCACtrlE, RcvHdrq15DCAOPH), 736 ~SYM_MASK(DCACtrlE, RcvHdrq15DCAOPH) , KREG_IDX(DCACtrlE) }, 737 { 4, SYM_LSB(DCACtrlF, RcvHdrq16DCAOPH), 738 ~SYM_MASK(DCACtrlF, RcvHdrq16DCAOPH) , KREG_IDX(DCACtrlF) }, 739 { 4, SYM_LSB(DCACtrlF, RcvHdrq17DCAOPH), 740 ~SYM_MASK(DCACtrlF, RcvHdrq17DCAOPH) , KREG_IDX(DCACtrlF) }, 741 }; 742 #endif 743 744 /* ibcctrl bits */ 745 #define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1 746 /* cycle through TS1/TS2 till OK */ 747 #define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2 748 /* wait for TS1, then go on */ 749 #define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3 750 #define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16 751 752 #define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ 753 #define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ 754 #define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ 755 756 #define BLOB_7322_IBCHG 0x101 757 758 static inline void qib_write_kreg(const struct qib_devdata *dd, 759 const u32 regno, u64 value); 760 static inline u32 qib_read_kreg32(const struct qib_devdata *, const u32); 761 static void write_7322_initregs(struct qib_devdata *); 762 static void write_7322_init_portregs(struct qib_pportdata *); 763 static void setup_7322_link_recovery(struct qib_pportdata *, u32); 764 static void check_7322_rxe_status(struct qib_pportdata *); 765 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *); 766 #ifdef CONFIG_INFINIBAND_QIB_DCA 767 static void qib_setup_dca(struct qib_devdata *dd); 768 static void setup_dca_notifier(struct qib_devdata *dd, int msixnum); 769 static void reset_dca_notifier(struct qib_devdata *dd, int msixnum); 770 #endif 771 772 /** 773 * qib_read_ureg32 - read 32-bit virtualized per-context register 774 * @dd: device 775 * @regno: register number 776 * @ctxt: context number 777 * 778 * Return the contents of a register that is virtualized to be per context. 779 * Returns -1 on errors (not distinguishable from valid contents at 780 * runtime; we may add a separate error variable at some point). 781 */ 782 static inline u32 qib_read_ureg32(const struct qib_devdata *dd, 783 enum qib_ureg regno, int ctxt) 784 { 785 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 786 return 0; 787 return readl(regno + (u64 __iomem *)( 788 (dd->ureg_align * ctxt) + (dd->userbase ? 789 (char __iomem *)dd->userbase : 790 (char __iomem *)dd->kregbase + dd->uregbase))); 791 } 792 793 /** 794 * qib_write_ureg - write virtualized per-context register 795 * @dd: device 796 * @regno: register number 797 * @value: value 798 * @ctxt: context 799 * 800 * Write the contents of a register that is virtualized to be per context. 801 */ 802 static inline void qib_write_ureg(const struct qib_devdata *dd, 803 enum qib_ureg regno, u64 value, int ctxt) 804 { 805 u64 __iomem *ubase; 806 807 if (dd->userbase) 808 ubase = (u64 __iomem *) 809 ((char __iomem *) dd->userbase + 810 dd->ureg_align * ctxt); 811 else 812 ubase = (u64 __iomem *) 813 (dd->uregbase + 814 (char __iomem *) dd->kregbase + 815 dd->ureg_align * ctxt); 816 817 if (dd->kregbase && (dd->flags & QIB_PRESENT)) 818 writeq(value, &ubase[regno]); 819 } 820 821 static inline u32 qib_read_kreg32(const struct qib_devdata *dd, 822 const u32 regno) 823 { 824 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 825 return -1; 826 return readl((u32 __iomem *) &dd->kregbase[regno]); 827 } 828 829 static inline u64 qib_read_kreg64(const struct qib_devdata *dd, 830 const u32 regno) 831 { 832 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 833 return -1; 834 return readq(&dd->kregbase[regno]); 835 } 836 837 static inline void qib_write_kreg(const struct qib_devdata *dd, 838 const u32 regno, u64 value) 839 { 840 if (dd->kregbase && (dd->flags & QIB_PRESENT)) 841 writeq(value, &dd->kregbase[regno]); 842 } 843 844 /* 845 * not many sanity checks for the port-specific kernel register routines, 846 * since they are only used when it's known to be safe. 847 */ 848 static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd, 849 const u16 regno) 850 { 851 if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT)) 852 return 0ULL; 853 return readq(&ppd->cpspec->kpregbase[regno]); 854 } 855 856 static inline void qib_write_kreg_port(const struct qib_pportdata *ppd, 857 const u16 regno, u64 value) 858 { 859 if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase && 860 (ppd->dd->flags & QIB_PRESENT)) 861 writeq(value, &ppd->cpspec->kpregbase[regno]); 862 } 863 864 /** 865 * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register 866 * @dd: the qlogic_ib device 867 * @regno: the register number to write 868 * @ctxt: the context containing the register 869 * @value: the value to write 870 */ 871 static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, 872 const u16 regno, unsigned ctxt, 873 u64 value) 874 { 875 qib_write_kreg(dd, regno + ctxt, value); 876 } 877 878 static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno) 879 { 880 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) 881 return 0; 882 return readq(&dd->cspec->cregbase[regno]); 883 884 885 } 886 887 static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno) 888 { 889 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) 890 return 0; 891 return readl(&dd->cspec->cregbase[regno]); 892 893 894 } 895 896 static inline void write_7322_creg_port(const struct qib_pportdata *ppd, 897 u16 regno, u64 value) 898 { 899 if (ppd->cpspec && ppd->cpspec->cpregbase && 900 (ppd->dd->flags & QIB_PRESENT)) 901 writeq(value, &ppd->cpspec->cpregbase[regno]); 902 } 903 904 static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd, 905 u16 regno) 906 { 907 if (!ppd->cpspec || !ppd->cpspec->cpregbase || 908 !(ppd->dd->flags & QIB_PRESENT)) 909 return 0; 910 return readq(&ppd->cpspec->cpregbase[regno]); 911 } 912 913 static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd, 914 u16 regno) 915 { 916 if (!ppd->cpspec || !ppd->cpspec->cpregbase || 917 !(ppd->dd->flags & QIB_PRESENT)) 918 return 0; 919 return readl(&ppd->cpspec->cpregbase[regno]); 920 } 921 922 /* bits in Control register */ 923 #define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset) 924 #define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn) 925 926 /* bits in general interrupt regs */ 927 #define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask) 928 #define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17) 929 #define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB) 930 #define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask) 931 #define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17) 932 #define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB) 933 #define QIB_I_C_ERROR INT_MASK(Err) 934 935 #define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1)) 936 #define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail) 937 #define QIB_I_GPIO INT_MASK(AssertGPIO) 938 #define QIB_I_P_SDMAINT(pidx) \ 939 (INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ 940 INT_MASK_P(SDmaProgress, pidx) | \ 941 INT_MASK_PM(SDmaCleanupDone, pidx)) 942 943 /* Interrupt bits that are "per port" */ 944 #define QIB_I_P_BITSEXTANT(pidx) \ 945 (INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \ 946 INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ 947 INT_MASK_P(SDmaProgress, pidx) | \ 948 INT_MASK_PM(SDmaCleanupDone, pidx)) 949 950 /* Interrupt bits that are common to a device */ 951 /* currently unused: QIB_I_SPIOSENT */ 952 #define QIB_I_C_BITSEXTANT \ 953 (QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \ 954 QIB_I_SPIOSENT | \ 955 QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO) 956 957 #define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \ 958 QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1)) 959 960 /* 961 * Error bits that are "per port". 962 */ 963 #define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged) 964 #define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr) 965 #define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr) 966 #define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr) 967 #define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr) 968 #define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr) 969 #define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr) 970 #define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr) 971 #define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr) 972 #define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr) 973 #define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr) 974 #define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr) 975 #define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr) 976 #define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr) 977 #define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr) 978 #define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr) 979 #define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr) 980 #define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr) 981 #define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr) 982 #define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr) 983 #define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr) 984 #define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr) 985 #define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr) 986 #define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr) 987 #define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr) 988 #define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr) 989 #define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr) 990 #define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr) 991 992 #define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr) 993 #define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr) 994 #define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr) 995 #define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr) 996 #define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr) 997 #define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr) 998 #define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr) 999 #define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr) 1000 #define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr) 1001 #define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr) 1002 #define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr) 1003 1004 /* Error bits that are common to a device */ 1005 #define QIB_E_RESET ERR_MASK(ResetNegated) 1006 #define QIB_E_HARDWARE ERR_MASK(HardwareErr) 1007 #define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr) 1008 1009 1010 /* 1011 * Per chip (rather than per-port) errors. Most either do 1012 * nothing but trigger a print (because they self-recover, or 1013 * always occur in tandem with other errors that handle the 1014 * issue), or because they indicate errors with no recovery, 1015 * but we want to know that they happened. 1016 */ 1017 #define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr) 1018 #define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd) 1019 #define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr) 1020 #define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr) 1021 #define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr) 1022 #define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr) 1023 #define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr) 1024 #define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr) 1025 1026 /* SDMA chip errors (not per port) 1027 * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get 1028 * the SDMAHALT error immediately, so we just print the dup error via the 1029 * E_AUTO mechanism. This is true of most of the per-port fatal errors 1030 * as well, but since this is port-independent, by definition, it's 1031 * handled a bit differently. SDMA_VL15 and SDMA_WRONG_PORT are per 1032 * packet send errors, and so are handled in the same manner as other 1033 * per-packet errors. 1034 */ 1035 #define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err) 1036 #define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr) 1037 #define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr) 1038 1039 /* 1040 * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS 1041 * it is used to print "common" packet errors. 1042 */ 1043 #define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\ 1044 QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\ 1045 QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\ 1046 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ 1047 QIB_E_P_REBP) 1048 1049 /* Error Bits that Packet-related (Receive, per-port) */ 1050 #define QIB_E_P_RPKTERRS (\ 1051 QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \ 1052 QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \ 1053 QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\ 1054 QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \ 1055 QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \ 1056 QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP) 1057 1058 /* 1059 * Error bits that are Send-related (per port) 1060 * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling). 1061 * All of these potentially need to have a buffer disarmed 1062 */ 1063 #define QIB_E_P_SPKTERRS (\ 1064 QIB_E_P_SUNEXP_PKTNUM |\ 1065 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ 1066 QIB_E_P_SMAXPKTLEN |\ 1067 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ 1068 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \ 1069 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL) 1070 1071 #define QIB_E_SPKTERRS ( \ 1072 QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \ 1073 ERR_MASK_N(SendUnsupportedVLErr) | \ 1074 QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT) 1075 1076 #define QIB_E_P_SDMAERRS ( \ 1077 QIB_E_P_SDMAHALT | \ 1078 QIB_E_P_SDMADESCADDRMISALIGN | \ 1079 QIB_E_P_SDMAUNEXPDATA | \ 1080 QIB_E_P_SDMAMISSINGDW | \ 1081 QIB_E_P_SDMADWEN | \ 1082 QIB_E_P_SDMARPYTAG | \ 1083 QIB_E_P_SDMA1STDESC | \ 1084 QIB_E_P_SDMABASE | \ 1085 QIB_E_P_SDMATAILOUTOFBOUND | \ 1086 QIB_E_P_SDMAOUTOFBOUND | \ 1087 QIB_E_P_SDMAGENMISMATCH) 1088 1089 /* 1090 * This sets some bits more than once, but makes it more obvious which 1091 * bits are not handled under other categories, and the repeat definition 1092 * is not a problem. 1093 */ 1094 #define QIB_E_P_BITSEXTANT ( \ 1095 QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \ 1096 QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \ 1097 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \ 1098 QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \ 1099 ) 1100 1101 /* 1102 * These are errors that can occur when the link 1103 * changes state while a packet is being sent or received. This doesn't 1104 * cover things like EBP or VCRC that can be the result of a sending 1105 * having the link change state, so we receive a "known bad" packet. 1106 * All of these are "per port", so renamed: 1107 */ 1108 #define QIB_E_P_LINK_PKTERRS (\ 1109 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ 1110 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\ 1111 QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\ 1112 QIB_E_P_RUNEXPCHAR) 1113 1114 /* 1115 * This sets some bits more than once, but makes it more obvious which 1116 * bits are not handled under other categories (such as QIB_E_SPKTERRS), 1117 * and the repeat definition is not a problem. 1118 */ 1119 #define QIB_E_C_BITSEXTANT (\ 1120 QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\ 1121 QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\ 1122 QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE) 1123 1124 /* Likewise Neuter E_SPKT_ERRS_IGNORE */ 1125 #define E_SPKT_ERRS_IGNORE 0 1126 1127 #define QIB_EXTS_MEMBIST_DISABLED \ 1128 SYM_MASK(EXTStatus, MemBISTDisabled) 1129 #define QIB_EXTS_MEMBIST_ENDTEST \ 1130 SYM_MASK(EXTStatus, MemBISTEndTest) 1131 1132 #define QIB_E_SPIOARMLAUNCH \ 1133 ERR_MASK(SendArmLaunchErr) 1134 1135 #define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd) 1136 #define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd) 1137 1138 /* 1139 * IBTA_1_2 is set when multiple speeds are enabled (normal), 1140 * and also if forced QDR (only QDR enabled). It's enabled for the 1141 * forced QDR case so that scrambling will be enabled by the TS3 1142 * exchange, when supported by both sides of the link. 1143 */ 1144 #define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE) 1145 #define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED) 1146 #define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR) 1147 #define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) 1148 #define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) 1149 #define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \ 1150 SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)) 1151 #define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR) 1152 1153 #define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod) 1154 #define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod) 1155 1156 #define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS) 1157 #define IBA7322_IBC_WIDTH_4X_ONLY (1<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) 1158 #define IBA7322_IBC_WIDTH_1X_ONLY (0<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) 1159 1160 #define IBA7322_IBC_RXPOL_MASK SYM_MASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP) 1161 #define IBA7322_IBC_RXPOL_LSB SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP) 1162 #define IBA7322_IBC_HRTBT_MASK (SYM_MASK(IBCCtrlB_0, HRTBT_AUTO) | \ 1163 SYM_MASK(IBCCtrlB_0, HRTBT_ENB)) 1164 #define IBA7322_IBC_HRTBT_RMASK (IBA7322_IBC_HRTBT_MASK >> \ 1165 SYM_LSB(IBCCtrlB_0, HRTBT_ENB)) 1166 #define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB) 1167 1168 #define IBA7322_REDIRECT_VEC_PER_REG 12 1169 1170 #define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En) 1171 #define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En) 1172 #define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En) 1173 #define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En) 1174 #define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En) 1175 1176 #define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */ 1177 1178 #define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \ 1179 .msg = #fldname , .sz = sizeof(#fldname) } 1180 #define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \ 1181 fldname##Mask##_##port), .msg = #fldname , .sz = sizeof(#fldname) } 1182 static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = { 1183 HWE_AUTO_P(IBSerdesPClkNotDetect, 1), 1184 HWE_AUTO_P(IBSerdesPClkNotDetect, 0), 1185 HWE_AUTO(PCIESerdesPClkNotDetect), 1186 HWE_AUTO(PowerOnBISTFailed), 1187 HWE_AUTO(TempsenseTholdReached), 1188 HWE_AUTO(MemoryErr), 1189 HWE_AUTO(PCIeBusParityErr), 1190 HWE_AUTO(PcieCplTimeout), 1191 HWE_AUTO(PciePoisonedTLP), 1192 HWE_AUTO_P(SDmaMemReadErr, 1), 1193 HWE_AUTO_P(SDmaMemReadErr, 0), 1194 HWE_AUTO_P(IBCBusFromSPCParityErr, 1), 1195 HWE_AUTO_P(IBCBusToSPCParityErr, 1), 1196 HWE_AUTO_P(IBCBusFromSPCParityErr, 0), 1197 HWE_AUTO(statusValidNoEop), 1198 HWE_AUTO(LATriggered), 1199 { .mask = 0, .sz = 0 } 1200 }; 1201 1202 #define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \ 1203 .msg = #fldname, .sz = sizeof(#fldname) } 1204 #define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \ 1205 .msg = #fldname, .sz = sizeof(#fldname) } 1206 static const struct qib_hwerror_msgs qib_7322error_msgs[] = { 1207 E_AUTO(RcvEgrFullErr), 1208 E_AUTO(RcvHdrFullErr), 1209 E_AUTO(ResetNegated), 1210 E_AUTO(HardwareErr), 1211 E_AUTO(InvalidAddrErr), 1212 E_AUTO(SDmaVL15Err), 1213 E_AUTO(SBufVL15MisUseErr), 1214 E_AUTO(InvalidEEPCmd), 1215 E_AUTO(RcvContextShareErr), 1216 E_AUTO(SendVLMismatchErr), 1217 E_AUTO(SendArmLaunchErr), 1218 E_AUTO(SendSpecialTriggerErr), 1219 E_AUTO(SDmaWrongPortErr), 1220 E_AUTO(SDmaBufMaskDuplicateErr), 1221 { .mask = 0, .sz = 0 } 1222 }; 1223 1224 static const struct qib_hwerror_msgs qib_7322p_error_msgs[] = { 1225 E_P_AUTO(IBStatusChanged), 1226 E_P_AUTO(SHeadersErr), 1227 E_P_AUTO(VL15BufMisuseErr), 1228 /* 1229 * SDmaHaltErr is not really an error, make it clearer; 1230 */ 1231 {.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted", 1232 .sz = 11}, 1233 E_P_AUTO(SDmaDescAddrMisalignErr), 1234 E_P_AUTO(SDmaUnexpDataErr), 1235 E_P_AUTO(SDmaMissingDwErr), 1236 E_P_AUTO(SDmaDwEnErr), 1237 E_P_AUTO(SDmaRpyTagErr), 1238 E_P_AUTO(SDma1stDescErr), 1239 E_P_AUTO(SDmaBaseErr), 1240 E_P_AUTO(SDmaTailOutOfBoundErr), 1241 E_P_AUTO(SDmaOutOfBoundErr), 1242 E_P_AUTO(SDmaGenMismatchErr), 1243 E_P_AUTO(SendBufMisuseErr), 1244 E_P_AUTO(SendUnsupportedVLErr), 1245 E_P_AUTO(SendUnexpectedPktNumErr), 1246 E_P_AUTO(SendDroppedDataPktErr), 1247 E_P_AUTO(SendDroppedSmpPktErr), 1248 E_P_AUTO(SendPktLenErr), 1249 E_P_AUTO(SendUnderRunErr), 1250 E_P_AUTO(SendMaxPktLenErr), 1251 E_P_AUTO(SendMinPktLenErr), 1252 E_P_AUTO(RcvIBLostLinkErr), 1253 E_P_AUTO(RcvHdrErr), 1254 E_P_AUTO(RcvHdrLenErr), 1255 E_P_AUTO(RcvBadTidErr), 1256 E_P_AUTO(RcvBadVersionErr), 1257 E_P_AUTO(RcvIBFlowErr), 1258 E_P_AUTO(RcvEBPErr), 1259 E_P_AUTO(RcvUnsupportedVLErr), 1260 E_P_AUTO(RcvUnexpectedCharErr), 1261 E_P_AUTO(RcvShortPktLenErr), 1262 E_P_AUTO(RcvLongPktLenErr), 1263 E_P_AUTO(RcvMaxPktLenErr), 1264 E_P_AUTO(RcvMinPktLenErr), 1265 E_P_AUTO(RcvICRCErr), 1266 E_P_AUTO(RcvVCRCErr), 1267 E_P_AUTO(RcvFormatErr), 1268 { .mask = 0, .sz = 0 } 1269 }; 1270 1271 /* 1272 * Below generates "auto-message" for interrupts not specific to any port or 1273 * context 1274 */ 1275 #define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \ 1276 .msg = #fldname, .sz = sizeof(#fldname) } 1277 /* Below generates "auto-message" for interrupts specific to a port */ 1278 #define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\ 1279 SYM_LSB(IntMask, fldname##Mask##_0), \ 1280 SYM_LSB(IntMask, fldname##Mask##_1)), \ 1281 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } 1282 /* For some reason, the SerDesTrimDone bits are reversed */ 1283 #define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\ 1284 SYM_LSB(IntMask, fldname##Mask##_1), \ 1285 SYM_LSB(IntMask, fldname##Mask##_0)), \ 1286 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } 1287 /* 1288 * Below generates "auto-message" for interrupts specific to a context, 1289 * with ctxt-number appended 1290 */ 1291 #define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\ 1292 SYM_LSB(IntMask, fldname##0IntMask), \ 1293 SYM_LSB(IntMask, fldname##17IntMask)), \ 1294 .msg = #fldname "_C", .sz = sizeof(#fldname "_C") } 1295 1296 #define TXSYMPTOM_AUTO_P(fldname) \ 1297 { .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), \ 1298 .msg = #fldname, .sz = sizeof(#fldname) } 1299 static const struct qib_hwerror_msgs hdrchk_msgs[] = { 1300 TXSYMPTOM_AUTO_P(NonKeyPacket), 1301 TXSYMPTOM_AUTO_P(GRHFail), 1302 TXSYMPTOM_AUTO_P(PkeyFail), 1303 TXSYMPTOM_AUTO_P(QPFail), 1304 TXSYMPTOM_AUTO_P(SLIDFail), 1305 TXSYMPTOM_AUTO_P(RawIPV6), 1306 TXSYMPTOM_AUTO_P(PacketTooSmall), 1307 { .mask = 0, .sz = 0 } 1308 }; 1309 1310 #define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */ 1311 1312 /* 1313 * Called when we might have an error that is specific to a particular 1314 * PIO buffer, and may need to cancel that buffer, so it can be re-used, 1315 * because we don't need to force the update of pioavail 1316 */ 1317 static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd) 1318 { 1319 struct qib_devdata *dd = ppd->dd; 1320 u32 i; 1321 int any; 1322 u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 1323 u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG; 1324 unsigned long sbuf[4]; 1325 1326 /* 1327 * It's possible that sendbuffererror could have bits set; might 1328 * have already done this as a result of hardware error handling. 1329 */ 1330 any = 0; 1331 for (i = 0; i < regcnt; ++i) { 1332 sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i); 1333 if (sbuf[i]) { 1334 any = 1; 1335 qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]); 1336 } 1337 } 1338 1339 if (any) 1340 qib_disarm_piobufs_set(dd, sbuf, piobcnt); 1341 } 1342 1343 /* No txe_recover yet, if ever */ 1344 1345 /* No decode__errors yet */ 1346 static void err_decode(char *msg, size_t len, u64 errs, 1347 const struct qib_hwerror_msgs *msp) 1348 { 1349 u64 these, lmask; 1350 int took, multi, n = 0; 1351 1352 while (errs && msp && msp->mask) { 1353 multi = (msp->mask & (msp->mask - 1)); 1354 while (errs & msp->mask) { 1355 these = (errs & msp->mask); 1356 lmask = (these & (these - 1)) ^ these; 1357 if (len) { 1358 if (n++) { 1359 /* separate the strings */ 1360 *msg++ = ','; 1361 len--; 1362 } 1363 /* msp->sz counts the nul */ 1364 took = min_t(size_t, msp->sz - (size_t)1, len); 1365 memcpy(msg, msp->msg, took); 1366 len -= took; 1367 msg += took; 1368 if (len) 1369 *msg = '\0'; 1370 } 1371 errs &= ~lmask; 1372 if (len && multi) { 1373 /* More than one bit this mask */ 1374 int idx = -1; 1375 1376 while (lmask & msp->mask) { 1377 ++idx; 1378 lmask >>= 1; 1379 } 1380 took = scnprintf(msg, len, "_%d", idx); 1381 len -= took; 1382 msg += took; 1383 } 1384 } 1385 ++msp; 1386 } 1387 /* If some bits are left, show in hex. */ 1388 if (len && errs) 1389 snprintf(msg, len, "%sMORE:%llX", n ? "," : "", 1390 (unsigned long long) errs); 1391 } 1392 1393 /* only called if r1 set */ 1394 static void flush_fifo(struct qib_pportdata *ppd) 1395 { 1396 struct qib_devdata *dd = ppd->dd; 1397 u32 __iomem *piobuf; 1398 u32 bufn; 1399 u32 *hdr; 1400 u64 pbc; 1401 const unsigned hdrwords = 7; 1402 static struct ib_header ibhdr = { 1403 .lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH), 1404 .lrh[1] = IB_LID_PERMISSIVE, 1405 .lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC), 1406 .lrh[3] = IB_LID_PERMISSIVE, 1407 .u.oth.bth[0] = cpu_to_be32( 1408 (IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY), 1409 .u.oth.bth[1] = cpu_to_be32(0), 1410 .u.oth.bth[2] = cpu_to_be32(0), 1411 .u.oth.u.ud.deth[0] = cpu_to_be32(0), 1412 .u.oth.u.ud.deth[1] = cpu_to_be32(0), 1413 }; 1414 1415 /* 1416 * Send a dummy VL15 packet to flush the launch FIFO. 1417 * This will not actually be sent since the TxeBypassIbc bit is set. 1418 */ 1419 pbc = PBC_7322_VL15_SEND | 1420 (((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) | 1421 (hdrwords + SIZE_OF_CRC); 1422 piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn); 1423 if (!piobuf) 1424 return; 1425 writeq(pbc, piobuf); 1426 hdr = (u32 *) &ibhdr; 1427 if (dd->flags & QIB_PIO_FLUSH_WC) { 1428 qib_flush_wc(); 1429 qib_pio_copy(piobuf + 2, hdr, hdrwords - 1); 1430 qib_flush_wc(); 1431 __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1); 1432 qib_flush_wc(); 1433 } else 1434 qib_pio_copy(piobuf + 2, hdr, hdrwords); 1435 qib_sendbuf_done(dd, bufn); 1436 } 1437 1438 /* 1439 * This is called with interrupts disabled and sdma_lock held. 1440 */ 1441 static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) 1442 { 1443 struct qib_devdata *dd = ppd->dd; 1444 u64 set_sendctrl = 0; 1445 u64 clr_sendctrl = 0; 1446 1447 if (op & QIB_SDMA_SENDCTRL_OP_ENABLE) 1448 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); 1449 else 1450 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); 1451 1452 if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE) 1453 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); 1454 else 1455 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); 1456 1457 if (op & QIB_SDMA_SENDCTRL_OP_HALT) 1458 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); 1459 else 1460 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); 1461 1462 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) 1463 set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | 1464 SYM_MASK(SendCtrl_0, TxeAbortIbc) | 1465 SYM_MASK(SendCtrl_0, TxeDrainRmFifo); 1466 else 1467 clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | 1468 SYM_MASK(SendCtrl_0, TxeAbortIbc) | 1469 SYM_MASK(SendCtrl_0, TxeDrainRmFifo); 1470 1471 spin_lock(&dd->sendctrl_lock); 1472 1473 /* If we are draining everything, block sends first */ 1474 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { 1475 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); 1476 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1477 qib_write_kreg(dd, kr_scratch, 0); 1478 } 1479 1480 ppd->p_sendctrl |= set_sendctrl; 1481 ppd->p_sendctrl &= ~clr_sendctrl; 1482 1483 if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP) 1484 qib_write_kreg_port(ppd, krp_sendctrl, 1485 ppd->p_sendctrl | 1486 SYM_MASK(SendCtrl_0, SDmaCleanup)); 1487 else 1488 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1489 qib_write_kreg(dd, kr_scratch, 0); 1490 1491 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { 1492 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); 1493 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1494 qib_write_kreg(dd, kr_scratch, 0); 1495 } 1496 1497 spin_unlock(&dd->sendctrl_lock); 1498 1499 if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1) 1500 flush_fifo(ppd); 1501 } 1502 1503 static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd) 1504 { 1505 __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned); 1506 } 1507 1508 static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd) 1509 { 1510 /* 1511 * Set SendDmaLenGen and clear and set 1512 * the MSB of the generation count to enable generation checking 1513 * and load the internal generation counter. 1514 */ 1515 qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt); 1516 qib_write_kreg_port(ppd, krp_senddmalengen, 1517 ppd->sdma_descq_cnt | 1518 (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB)); 1519 } 1520 1521 /* 1522 * Must be called with sdma_lock held, or before init finished. 1523 */ 1524 static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail) 1525 { 1526 /* Commit writes to memory and advance the tail on the chip */ 1527 wmb(); 1528 ppd->sdma_descq_tail = tail; 1529 qib_write_kreg_port(ppd, krp_senddmatail, tail); 1530 } 1531 1532 /* 1533 * This is called with interrupts disabled and sdma_lock held. 1534 */ 1535 static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd) 1536 { 1537 /* 1538 * Drain all FIFOs. 1539 * The hardware doesn't require this but we do it so that verbs 1540 * and user applications don't wait for link active to send stale 1541 * data. 1542 */ 1543 sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH); 1544 1545 qib_sdma_7322_setlengen(ppd); 1546 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ 1547 ppd->sdma_head_dma[0] = 0; 1548 qib_7322_sdma_sendctrl(ppd, 1549 ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP); 1550 } 1551 1552 #define DISABLES_SDMA ( \ 1553 QIB_E_P_SDMAHALT | \ 1554 QIB_E_P_SDMADESCADDRMISALIGN | \ 1555 QIB_E_P_SDMAMISSINGDW | \ 1556 QIB_E_P_SDMADWEN | \ 1557 QIB_E_P_SDMARPYTAG | \ 1558 QIB_E_P_SDMA1STDESC | \ 1559 QIB_E_P_SDMABASE | \ 1560 QIB_E_P_SDMATAILOUTOFBOUND | \ 1561 QIB_E_P_SDMAOUTOFBOUND | \ 1562 QIB_E_P_SDMAGENMISMATCH) 1563 1564 static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs) 1565 { 1566 unsigned long flags; 1567 struct qib_devdata *dd = ppd->dd; 1568 1569 errs &= QIB_E_P_SDMAERRS; 1570 err_decode(ppd->cpspec->sdmamsgbuf, sizeof(ppd->cpspec->sdmamsgbuf), 1571 errs, qib_7322p_error_msgs); 1572 1573 if (errs & QIB_E_P_SDMAUNEXPDATA) 1574 qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit, 1575 ppd->port); 1576 1577 spin_lock_irqsave(&ppd->sdma_lock, flags); 1578 1579 if (errs != QIB_E_P_SDMAHALT) { 1580 /* SDMA errors have QIB_E_P_SDMAHALT and another bit set */ 1581 qib_dev_porterr(dd, ppd->port, 1582 "SDMA %s 0x%016llx %s\n", 1583 qib_sdma_state_names[ppd->sdma_state.current_state], 1584 errs, ppd->cpspec->sdmamsgbuf); 1585 dump_sdma_7322_state(ppd); 1586 } 1587 1588 switch (ppd->sdma_state.current_state) { 1589 case qib_sdma_state_s00_hw_down: 1590 break; 1591 1592 case qib_sdma_state_s10_hw_start_up_wait: 1593 if (errs & QIB_E_P_SDMAHALT) 1594 __qib_sdma_process_event(ppd, 1595 qib_sdma_event_e20_hw_started); 1596 break; 1597 1598 case qib_sdma_state_s20_idle: 1599 break; 1600 1601 case qib_sdma_state_s30_sw_clean_up_wait: 1602 break; 1603 1604 case qib_sdma_state_s40_hw_clean_up_wait: 1605 if (errs & QIB_E_P_SDMAHALT) 1606 __qib_sdma_process_event(ppd, 1607 qib_sdma_event_e50_hw_cleaned); 1608 break; 1609 1610 case qib_sdma_state_s50_hw_halt_wait: 1611 if (errs & QIB_E_P_SDMAHALT) 1612 __qib_sdma_process_event(ppd, 1613 qib_sdma_event_e60_hw_halted); 1614 break; 1615 1616 case qib_sdma_state_s99_running: 1617 __qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted); 1618 __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted); 1619 break; 1620 } 1621 1622 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 1623 } 1624 1625 /* 1626 * handle per-device errors (not per-port errors) 1627 */ 1628 static noinline void handle_7322_errors(struct qib_devdata *dd) 1629 { 1630 char *msg; 1631 u64 iserr = 0; 1632 u64 errs; 1633 u64 mask; 1634 1635 qib_stats.sps_errints++; 1636 errs = qib_read_kreg64(dd, kr_errstatus); 1637 if (!errs) { 1638 qib_devinfo(dd->pcidev, 1639 "device error interrupt, but no error bits set!\n"); 1640 goto done; 1641 } 1642 1643 /* don't report errors that are masked */ 1644 errs &= dd->cspec->errormask; 1645 msg = dd->cspec->emsgbuf; 1646 1647 /* do these first, they are most important */ 1648 if (errs & QIB_E_HARDWARE) { 1649 *msg = '\0'; 1650 qib_7322_handle_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf)); 1651 } 1652 1653 if (errs & QIB_E_SPKTERRS) { 1654 qib_disarm_7322_senderrbufs(dd->pport); 1655 qib_stats.sps_txerrs++; 1656 } else if (errs & QIB_E_INVALIDADDR) 1657 qib_stats.sps_txerrs++; 1658 else if (errs & QIB_E_ARMLAUNCH) { 1659 qib_stats.sps_txerrs++; 1660 qib_disarm_7322_senderrbufs(dd->pport); 1661 } 1662 qib_write_kreg(dd, kr_errclear, errs); 1663 1664 /* 1665 * The ones we mask off are handled specially below 1666 * or above. Also mask SDMADISABLED by default as it 1667 * is too chatty. 1668 */ 1669 mask = QIB_E_HARDWARE; 1670 *msg = '\0'; 1671 1672 err_decode(msg, sizeof(dd->cspec->emsgbuf), errs & ~mask, 1673 qib_7322error_msgs); 1674 1675 /* 1676 * Getting reset is a tragedy for all ports. Mark the device 1677 * _and_ the ports as "offline" in way meaningful to each. 1678 */ 1679 if (errs & QIB_E_RESET) { 1680 int pidx; 1681 1682 qib_dev_err(dd, 1683 "Got reset, requires re-init (unload and reload driver)\n"); 1684 dd->flags &= ~QIB_INITTED; /* needs re-init */ 1685 /* mark as having had error */ 1686 *dd->devstatusp |= QIB_STATUS_HWERROR; 1687 for (pidx = 0; pidx < dd->num_pports; ++pidx) 1688 if (dd->pport[pidx].link_speed_supported) 1689 *dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF; 1690 } 1691 1692 if (*msg && iserr) 1693 qib_dev_err(dd, "%s error\n", msg); 1694 1695 /* 1696 * If there were hdrq or egrfull errors, wake up any processes 1697 * waiting in poll. We used to try to check which contexts had 1698 * the overflow, but given the cost of that and the chip reads 1699 * to support it, it's better to just wake everybody up if we 1700 * get an overflow; waiters can poll again if it's not them. 1701 */ 1702 if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { 1703 qib_handle_urcv(dd, ~0U); 1704 if (errs & ERR_MASK(RcvEgrFullErr)) 1705 qib_stats.sps_buffull++; 1706 else 1707 qib_stats.sps_hdrfull++; 1708 } 1709 1710 done: 1711 return; 1712 } 1713 1714 static void qib_error_tasklet(struct tasklet_struct *t) 1715 { 1716 struct qib_devdata *dd = from_tasklet(dd, t, error_tasklet); 1717 1718 handle_7322_errors(dd); 1719 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 1720 } 1721 1722 static void reenable_chase(struct timer_list *t) 1723 { 1724 struct qib_chippport_specific *cp = from_timer(cp, t, chase_timer); 1725 struct qib_pportdata *ppd = cp->ppd; 1726 1727 ppd->cpspec->chase_timer.expires = 0; 1728 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, 1729 QLOGIC_IB_IBCC_LINKINITCMD_POLL); 1730 } 1731 1732 static void disable_chase(struct qib_pportdata *ppd, unsigned long tnow, 1733 u8 ibclt) 1734 { 1735 ppd->cpspec->chase_end = 0; 1736 1737 if (!qib_chase) 1738 return; 1739 1740 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, 1741 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 1742 ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME; 1743 add_timer(&ppd->cpspec->chase_timer); 1744 } 1745 1746 static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) 1747 { 1748 u8 ibclt; 1749 unsigned long tnow; 1750 1751 ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState); 1752 1753 /* 1754 * Detect and handle the state chase issue, where we can 1755 * get stuck if we are unlucky on timing on both sides of 1756 * the link. If we are, we disable, set a timer, and 1757 * then re-enable. 1758 */ 1759 switch (ibclt) { 1760 case IB_7322_LT_STATE_CFGRCVFCFG: 1761 case IB_7322_LT_STATE_CFGWAITRMT: 1762 case IB_7322_LT_STATE_TXREVLANES: 1763 case IB_7322_LT_STATE_CFGENH: 1764 tnow = jiffies; 1765 if (ppd->cpspec->chase_end && 1766 time_after(tnow, ppd->cpspec->chase_end)) 1767 disable_chase(ppd, tnow, ibclt); 1768 else if (!ppd->cpspec->chase_end) 1769 ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME; 1770 break; 1771 default: 1772 ppd->cpspec->chase_end = 0; 1773 break; 1774 } 1775 1776 if (((ibclt >= IB_7322_LT_STATE_CFGTEST && 1777 ibclt <= IB_7322_LT_STATE_CFGWAITENH) || 1778 ibclt == IB_7322_LT_STATE_LINKUP) && 1779 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { 1780 force_h1(ppd); 1781 ppd->cpspec->qdr_reforce = 1; 1782 if (!ppd->dd->cspec->r1) 1783 serdes_7322_los_enable(ppd, 0); 1784 } else if (ppd->cpspec->qdr_reforce && 1785 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) && 1786 (ibclt == IB_7322_LT_STATE_CFGENH || 1787 ibclt == IB_7322_LT_STATE_CFGIDLE || 1788 ibclt == IB_7322_LT_STATE_LINKUP)) 1789 force_h1(ppd); 1790 1791 if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) && 1792 ppd->link_speed_enabled == QIB_IB_QDR && 1793 (ibclt == IB_7322_LT_STATE_CFGTEST || 1794 ibclt == IB_7322_LT_STATE_CFGENH || 1795 (ibclt >= IB_7322_LT_STATE_POLLACTIVE && 1796 ibclt <= IB_7322_LT_STATE_SLEEPQUIET))) 1797 adj_tx_serdes(ppd); 1798 1799 if (ibclt != IB_7322_LT_STATE_LINKUP) { 1800 u8 ltstate = qib_7322_phys_portstate(ibcst); 1801 u8 pibclt = (u8)SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, 1802 LinkTrainingState); 1803 if (!ppd->dd->cspec->r1 && 1804 pibclt == IB_7322_LT_STATE_LINKUP && 1805 ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && 1806 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && 1807 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && 1808 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) 1809 /* If the link went down (but no into recovery, 1810 * turn LOS back on */ 1811 serdes_7322_los_enable(ppd, 1); 1812 if (!ppd->cpspec->qdr_dfe_on && 1813 ibclt <= IB_7322_LT_STATE_SLEEPQUIET) { 1814 ppd->cpspec->qdr_dfe_on = 1; 1815 ppd->cpspec->qdr_dfe_time = 0; 1816 /* On link down, reenable QDR adaptation */ 1817 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 1818 ppd->dd->cspec->r1 ? 1819 QDR_STATIC_ADAPT_DOWN_R1 : 1820 QDR_STATIC_ADAPT_DOWN); 1821 pr_info( 1822 "IB%u:%u re-enabled QDR adaptation ibclt %x\n", 1823 ppd->dd->unit, ppd->port, ibclt); 1824 } 1825 } 1826 } 1827 1828 static int qib_7322_set_ib_cfg(struct qib_pportdata *, int, u32); 1829 1830 /* 1831 * This is per-pport error handling. 1832 * will likely get it's own MSIx interrupt (one for each port, 1833 * although just a single handler). 1834 */ 1835 static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) 1836 { 1837 char *msg; 1838 u64 ignore_this_time = 0, iserr = 0, errs, fmask; 1839 struct qib_devdata *dd = ppd->dd; 1840 1841 /* do this as soon as possible */ 1842 fmask = qib_read_kreg64(dd, kr_act_fmask); 1843 if (!fmask) 1844 check_7322_rxe_status(ppd); 1845 1846 errs = qib_read_kreg_port(ppd, krp_errstatus); 1847 if (!errs) 1848 qib_devinfo(dd->pcidev, 1849 "Port%d error interrupt, but no error bits set!\n", 1850 ppd->port); 1851 if (!fmask) 1852 errs &= ~QIB_E_P_IBSTATUSCHANGED; 1853 if (!errs) 1854 goto done; 1855 1856 msg = ppd->cpspec->epmsgbuf; 1857 *msg = '\0'; 1858 1859 if (errs & ~QIB_E_P_BITSEXTANT) { 1860 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), 1861 errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs); 1862 if (!*msg) 1863 snprintf(msg, sizeof(ppd->cpspec->epmsgbuf), 1864 "no others"); 1865 qib_dev_porterr(dd, ppd->port, 1866 "error interrupt with unknown errors 0x%016Lx set (and %s)\n", 1867 (errs & ~QIB_E_P_BITSEXTANT), msg); 1868 *msg = '\0'; 1869 } 1870 1871 if (errs & QIB_E_P_SHDR) { 1872 u64 symptom; 1873 1874 /* determine cause, then write to clear */ 1875 symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom); 1876 qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0); 1877 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), symptom, 1878 hdrchk_msgs); 1879 *msg = '\0'; 1880 /* senderrbuf cleared in SPKTERRS below */ 1881 } 1882 1883 if (errs & QIB_E_P_SPKTERRS) { 1884 if ((errs & QIB_E_P_LINK_PKTERRS) && 1885 !(ppd->lflags & QIBL_LINKACTIVE)) { 1886 /* 1887 * This can happen when trying to bring the link 1888 * up, but the IB link changes state at the "wrong" 1889 * time. The IB logic then complains that the packet 1890 * isn't valid. We don't want to confuse people, so 1891 * we just don't print them, except at debug 1892 */ 1893 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), 1894 (errs & QIB_E_P_LINK_PKTERRS), 1895 qib_7322p_error_msgs); 1896 *msg = '\0'; 1897 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; 1898 } 1899 qib_disarm_7322_senderrbufs(ppd); 1900 } else if ((errs & QIB_E_P_LINK_PKTERRS) && 1901 !(ppd->lflags & QIBL_LINKACTIVE)) { 1902 /* 1903 * This can happen when SMA is trying to bring the link 1904 * up, but the IB link changes state at the "wrong" time. 1905 * The IB logic then complains that the packet isn't 1906 * valid. We don't want to confuse people, so we just 1907 * don't print them, except at debug 1908 */ 1909 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), errs, 1910 qib_7322p_error_msgs); 1911 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; 1912 *msg = '\0'; 1913 } 1914 1915 qib_write_kreg_port(ppd, krp_errclear, errs); 1916 1917 errs &= ~ignore_this_time; 1918 if (!errs) 1919 goto done; 1920 1921 if (errs & QIB_E_P_RPKTERRS) 1922 qib_stats.sps_rcverrs++; 1923 if (errs & QIB_E_P_SPKTERRS) 1924 qib_stats.sps_txerrs++; 1925 1926 iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS); 1927 1928 if (errs & QIB_E_P_SDMAERRS) 1929 sdma_7322_p_errors(ppd, errs); 1930 1931 if (errs & QIB_E_P_IBSTATUSCHANGED) { 1932 u64 ibcs; 1933 u8 ltstate; 1934 1935 ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a); 1936 ltstate = qib_7322_phys_portstate(ibcs); 1937 1938 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) 1939 handle_serdes_issues(ppd, ibcs); 1940 if (!(ppd->cpspec->ibcctrl_a & 1941 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) { 1942 /* 1943 * We got our interrupt, so init code should be 1944 * happy and not try alternatives. Now squelch 1945 * other "chatter" from link-negotiation (pre Init) 1946 */ 1947 ppd->cpspec->ibcctrl_a |= 1948 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 1949 qib_write_kreg_port(ppd, krp_ibcctrl_a, 1950 ppd->cpspec->ibcctrl_a); 1951 } 1952 1953 /* Update our picture of width and speed from chip */ 1954 ppd->link_width_active = 1955 (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ? 1956 IB_WIDTH_4X : IB_WIDTH_1X; 1957 ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0, 1958 LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs & 1959 SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ? 1960 QIB_IB_DDR : QIB_IB_SDR; 1961 1962 if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate != 1963 IB_PHYSPORTSTATE_DISABLED) 1964 qib_set_ib_7322_lstate(ppd, 0, 1965 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 1966 else 1967 /* 1968 * Since going into a recovery state causes the link 1969 * state to go down and since recovery is transitory, 1970 * it is better if we "miss" ever seeing the link 1971 * training state go into recovery (i.e., ignore this 1972 * transition for link state special handling purposes) 1973 * without updating lastibcstat. 1974 */ 1975 if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && 1976 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && 1977 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && 1978 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) 1979 qib_handle_e_ibstatuschanged(ppd, ibcs); 1980 } 1981 if (*msg && iserr) 1982 qib_dev_porterr(dd, ppd->port, "%s error\n", msg); 1983 1984 if (ppd->state_wanted & ppd->lflags) 1985 wake_up_interruptible(&ppd->state_wait); 1986 done: 1987 return; 1988 } 1989 1990 /* enable/disable chip from delivering interrupts */ 1991 static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable) 1992 { 1993 if (enable) { 1994 if (dd->flags & QIB_BADINTR) 1995 return; 1996 qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask); 1997 /* cause any pending enabled interrupts to be re-delivered */ 1998 qib_write_kreg(dd, kr_intclear, 0ULL); 1999 if (dd->cspec->num_msix_entries) { 2000 /* and same for MSIx */ 2001 u64 val = qib_read_kreg64(dd, kr_intgranted); 2002 2003 if (val) 2004 qib_write_kreg(dd, kr_intgranted, val); 2005 } 2006 } else 2007 qib_write_kreg(dd, kr_intmask, 0ULL); 2008 } 2009 2010 /* 2011 * Try to cleanup as much as possible for anything that might have gone 2012 * wrong while in freeze mode, such as pio buffers being written by user 2013 * processes (causing armlaunch), send errors due to going into freeze mode, 2014 * etc., and try to avoid causing extra interrupts while doing so. 2015 * Forcibly update the in-memory pioavail register copies after cleanup 2016 * because the chip won't do it while in freeze mode (the register values 2017 * themselves are kept correct). 2018 * Make sure that we don't lose any important interrupts by using the chip 2019 * feature that says that writing 0 to a bit in *clear that is set in 2020 * *status will cause an interrupt to be generated again (if allowed by 2021 * the *mask value). 2022 * This is in chip-specific code because of all of the register accesses, 2023 * even though the details are similar on most chips. 2024 */ 2025 static void qib_7322_clear_freeze(struct qib_devdata *dd) 2026 { 2027 int pidx; 2028 2029 /* disable error interrupts, to avoid confusion */ 2030 qib_write_kreg(dd, kr_errmask, 0ULL); 2031 2032 for (pidx = 0; pidx < dd->num_pports; ++pidx) 2033 if (dd->pport[pidx].link_speed_supported) 2034 qib_write_kreg_port(dd->pport + pidx, krp_errmask, 2035 0ULL); 2036 2037 /* also disable interrupts; errormask is sometimes overwritten */ 2038 qib_7322_set_intr_state(dd, 0); 2039 2040 /* clear the freeze, and be sure chip saw it */ 2041 qib_write_kreg(dd, kr_control, dd->control); 2042 qib_read_kreg32(dd, kr_scratch); 2043 2044 /* 2045 * Force new interrupt if any hwerr, error or interrupt bits are 2046 * still set, and clear "safe" send packet errors related to freeze 2047 * and cancelling sends. Re-enable error interrupts before possible 2048 * force of re-interrupt on pending interrupts. 2049 */ 2050 qib_write_kreg(dd, kr_hwerrclear, 0ULL); 2051 qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); 2052 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 2053 /* We need to purge per-port errs and reset mask, too */ 2054 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 2055 if (!dd->pport[pidx].link_speed_supported) 2056 continue; 2057 qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull); 2058 qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull); 2059 } 2060 qib_7322_set_intr_state(dd, 1); 2061 } 2062 2063 /* no error handling to speak of */ 2064 /** 2065 * qib_7322_handle_hwerrors - display hardware errors. 2066 * @dd: the qlogic_ib device 2067 * @msg: the output buffer 2068 * @msgl: the size of the output buffer 2069 * 2070 * Use same msg buffer as regular errors to avoid excessive stack 2071 * use. Most hardware errors are catastrophic, but for right now, 2072 * we'll print them and continue. We reuse the same message buffer as 2073 * qib_handle_errors() to avoid excessive stack usage. 2074 */ 2075 static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg, 2076 size_t msgl) 2077 { 2078 u64 hwerrs; 2079 u32 ctrl; 2080 int isfatal = 0; 2081 2082 hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); 2083 if (!hwerrs) 2084 goto bail; 2085 if (hwerrs == ~0ULL) { 2086 qib_dev_err(dd, 2087 "Read of hardware error status failed (all bits set); ignoring\n"); 2088 goto bail; 2089 } 2090 qib_stats.sps_hwerrs++; 2091 2092 /* Always clear the error status register, except BIST fail */ 2093 qib_write_kreg(dd, kr_hwerrclear, hwerrs & 2094 ~HWE_MASK(PowerOnBISTFailed)); 2095 2096 hwerrs &= dd->cspec->hwerrmask; 2097 2098 /* no EEPROM logging, yet */ 2099 2100 if (hwerrs) 2101 qib_devinfo(dd->pcidev, 2102 "Hardware error: hwerr=0x%llx (cleared)\n", 2103 (unsigned long long) hwerrs); 2104 2105 ctrl = qib_read_kreg32(dd, kr_control); 2106 if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) { 2107 /* 2108 * No recovery yet... 2109 */ 2110 if ((hwerrs & ~HWE_MASK(LATriggered)) || 2111 dd->cspec->stay_in_freeze) { 2112 /* 2113 * If any set that we aren't ignoring only make the 2114 * complaint once, in case it's stuck or recurring, 2115 * and we get here multiple times 2116 * Force link down, so switch knows, and 2117 * LEDs are turned off. 2118 */ 2119 if (dd->flags & QIB_INITTED) 2120 isfatal = 1; 2121 } else 2122 qib_7322_clear_freeze(dd); 2123 } 2124 2125 if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { 2126 isfatal = 1; 2127 strscpy(msg, 2128 "[Memory BIST test failed, InfiniPath hardware unusable]", 2129 msgl); 2130 /* ignore from now on, so disable until driver reloaded */ 2131 dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); 2132 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 2133 } 2134 2135 err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs); 2136 2137 /* Ignore esoteric PLL failures et al. */ 2138 2139 qib_dev_err(dd, "%s hardware error\n", msg); 2140 2141 if (hwerrs & 2142 (SYM_MASK(HwErrMask, SDmaMemReadErrMask_0) | 2143 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) { 2144 int pidx = 0; 2145 int err; 2146 unsigned long flags; 2147 struct qib_pportdata *ppd = dd->pport; 2148 2149 for (; pidx < dd->num_pports; ++pidx, ppd++) { 2150 err = 0; 2151 if (pidx == 0 && (hwerrs & 2152 SYM_MASK(HwErrMask, SDmaMemReadErrMask_0))) 2153 err++; 2154 if (pidx == 1 && (hwerrs & 2155 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) 2156 err++; 2157 if (err) { 2158 spin_lock_irqsave(&ppd->sdma_lock, flags); 2159 dump_sdma_7322_state(ppd); 2160 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 2161 } 2162 } 2163 } 2164 2165 if (isfatal && !dd->diag_client) { 2166 qib_dev_err(dd, 2167 "Fatal Hardware Error, no longer usable, SN %.16s\n", 2168 dd->serial); 2169 /* 2170 * for /sys status file and user programs to print; if no 2171 * trailing brace is copied, we'll know it was truncated. 2172 */ 2173 if (dd->freezemsg) 2174 snprintf(dd->freezemsg, dd->freezelen, 2175 "{%s}", msg); 2176 qib_disable_after_error(dd); 2177 } 2178 bail:; 2179 } 2180 2181 /** 2182 * qib_7322_init_hwerrors - enable hardware errors 2183 * @dd: the qlogic_ib device 2184 * 2185 * now that we have finished initializing everything that might reasonably 2186 * cause a hardware error, and cleared those errors bits as they occur, 2187 * we can enable hardware errors in the mask (potentially enabling 2188 * freeze mode), and enable hardware errors as errors (along with 2189 * everything else) in errormask 2190 */ 2191 static void qib_7322_init_hwerrors(struct qib_devdata *dd) 2192 { 2193 int pidx; 2194 u64 extsval; 2195 2196 extsval = qib_read_kreg64(dd, kr_extstatus); 2197 if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED | 2198 QIB_EXTS_MEMBIST_ENDTEST))) 2199 qib_dev_err(dd, "MemBIST did not complete!\n"); 2200 2201 /* never clear BIST failure, so reported on each driver load */ 2202 qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); 2203 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 2204 2205 /* clear all */ 2206 qib_write_kreg(dd, kr_errclear, ~0ULL); 2207 /* enable errors that are masked, at least this first time. */ 2208 qib_write_kreg(dd, kr_errmask, ~0ULL); 2209 dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); 2210 for (pidx = 0; pidx < dd->num_pports; ++pidx) 2211 if (dd->pport[pidx].link_speed_supported) 2212 qib_write_kreg_port(dd->pport + pidx, krp_errmask, 2213 ~0ULL); 2214 } 2215 2216 /* 2217 * Disable and enable the armlaunch error. Used for PIO bandwidth testing 2218 * on chips that are count-based, rather than trigger-based. There is no 2219 * reference counting, but that's also fine, given the intended use. 2220 * Only chip-specific because it's all register accesses 2221 */ 2222 static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable) 2223 { 2224 if (enable) { 2225 qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH); 2226 dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH; 2227 } else 2228 dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH; 2229 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 2230 } 2231 2232 /* 2233 * Formerly took parameter <which> in pre-shifted, 2234 * pre-merged form with LinkCmd and LinkInitCmd 2235 * together, and assuming the zero was NOP. 2236 */ 2237 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, 2238 u16 linitcmd) 2239 { 2240 u64 mod_wd; 2241 struct qib_devdata *dd = ppd->dd; 2242 unsigned long flags; 2243 2244 if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { 2245 /* 2246 * If we are told to disable, note that so link-recovery 2247 * code does not attempt to bring us back up. 2248 * Also reset everything that we can, so we start 2249 * completely clean when re-enabled (before we 2250 * actually issue the disable to the IBC) 2251 */ 2252 qib_7322_mini_pcs_reset(ppd); 2253 spin_lock_irqsave(&ppd->lflags_lock, flags); 2254 ppd->lflags |= QIBL_IB_LINK_DISABLED; 2255 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2256 } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { 2257 /* 2258 * Any other linkinitcmd will lead to LINKDOWN and then 2259 * to INIT (if all is well), so clear flag to let 2260 * link-recovery code attempt to bring us back up. 2261 */ 2262 spin_lock_irqsave(&ppd->lflags_lock, flags); 2263 ppd->lflags &= ~QIBL_IB_LINK_DISABLED; 2264 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2265 /* 2266 * Clear status change interrupt reduction so the 2267 * new state is seen. 2268 */ 2269 ppd->cpspec->ibcctrl_a &= 2270 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 2271 } 2272 2273 mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) | 2274 (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); 2275 2276 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a | 2277 mod_wd); 2278 /* write to chip to prevent back-to-back writes of ibc reg */ 2279 qib_write_kreg(dd, kr_scratch, 0); 2280 2281 } 2282 2283 /* 2284 * The total RCV buffer memory is 64KB, used for both ports, and is 2285 * in units of 64 bytes (same as IB flow control credit unit). 2286 * The consumedVL unit in the same registers are in 32 byte units! 2287 * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks, 2288 * and we can therefore allocate just 9 IB credits for 2 VL15 packets 2289 * in krp_rxcreditvl15, rather than 10. 2290 */ 2291 #define RCV_BUF_UNITSZ 64 2292 #define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports)) 2293 2294 static void set_vls(struct qib_pportdata *ppd) 2295 { 2296 int i, numvls, totcred, cred_vl, vl0extra; 2297 struct qib_devdata *dd = ppd->dd; 2298 u64 val; 2299 2300 numvls = qib_num_vls(ppd->vls_operational); 2301 2302 /* 2303 * Set up per-VL credits. Below is kluge based on these assumptions: 2304 * 1) port is disabled at the time early_init is called. 2305 * 2) give VL15 17 credits, for two max-plausible packets. 2306 * 3) Give VL0-N the rest, with any rounding excess used for VL0 2307 */ 2308 /* 2 VL15 packets @ 288 bytes each (including IB headers) */ 2309 totcred = NUM_RCV_BUF_UNITS(dd); 2310 cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ; 2311 totcred -= cred_vl; 2312 qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl); 2313 cred_vl = totcred / numvls; 2314 vl0extra = totcred - cred_vl * numvls; 2315 qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra); 2316 for (i = 1; i < numvls; i++) 2317 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl); 2318 for (; i < 8; i++) /* no buffer space for other VLs */ 2319 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); 2320 2321 /* Notify IBC that credits need to be recalculated */ 2322 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); 2323 val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); 2324 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 2325 qib_write_kreg(dd, kr_scratch, 0ULL); 2326 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); 2327 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 2328 2329 for (i = 0; i < numvls; i++) 2330 val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i); 2331 val = qib_read_kreg_port(ppd, krp_rxcreditvl15); 2332 2333 /* Change the number of operational VLs */ 2334 ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a & 2335 ~SYM_MASK(IBCCtrlA_0, NumVLane)) | 2336 ((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane)); 2337 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 2338 qib_write_kreg(dd, kr_scratch, 0ULL); 2339 } 2340 2341 /* 2342 * The code that deals with actual SerDes is in serdes_7322_init(). 2343 * Compared to the code for iba7220, it is minimal. 2344 */ 2345 static int serdes_7322_init(struct qib_pportdata *ppd); 2346 2347 /** 2348 * qib_7322_bringup_serdes - bring up the serdes 2349 * @ppd: physical port on the qlogic_ib device 2350 */ 2351 static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) 2352 { 2353 struct qib_devdata *dd = ppd->dd; 2354 u64 val, guid, ibc; 2355 unsigned long flags; 2356 2357 /* 2358 * SerDes model not in Pd, but still need to 2359 * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere 2360 * eventually. 2361 */ 2362 /* Put IBC in reset, sends disabled (should be in reset already) */ 2363 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); 2364 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 2365 qib_write_kreg(dd, kr_scratch, 0ULL); 2366 2367 /* ensure previous Tx parameters are not still forced */ 2368 qib_write_kreg_port(ppd, krp_tx_deemph_override, 2369 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 2370 reset_tx_deemphasis_override)); 2371 2372 if (qib_compat_ddr_negotiate) { 2373 ppd->cpspec->ibdeltainprog = 1; 2374 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, 2375 crp_ibsymbolerr); 2376 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, 2377 crp_iblinkerrrecov); 2378 } 2379 2380 /* flowcontrolwatermark is in units of KBytes */ 2381 ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark); 2382 /* 2383 * Flow control is sent this often, even if no changes in 2384 * buffer space occur. Units are 128ns for this chip. 2385 * Set to 3usec. 2386 */ 2387 ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod); 2388 /* max error tolerance */ 2389 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold); 2390 /* IB credit flow control. */ 2391 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold); 2392 /* 2393 * set initial max size pkt IBC will send, including ICRC; it's the 2394 * PIO buffer size in dwords, less 1; also see qib_set_mtu() 2395 */ 2396 ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << 2397 SYM_LSB(IBCCtrlA_0, MaxPktLen); 2398 ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */ 2399 2400 /* 2401 * Reset the PCS interface to the serdes (and also ibc, which is still 2402 * in reset from above). Writes new value of ibcctrl_a as last step. 2403 */ 2404 qib_7322_mini_pcs_reset(ppd); 2405 2406 if (!ppd->cpspec->ibcctrl_b) { 2407 unsigned lse = ppd->link_speed_enabled; 2408 2409 /* 2410 * Not on re-init after reset, establish shadow 2411 * and force initial config. 2412 */ 2413 ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd, 2414 krp_ibcctrl_b); 2415 ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR | 2416 IBA7322_IBC_SPEED_DDR | 2417 IBA7322_IBC_SPEED_SDR | 2418 IBA7322_IBC_WIDTH_AUTONEG | 2419 SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED)); 2420 if (lse & (lse - 1)) /* Muliple speeds enabled */ 2421 ppd->cpspec->ibcctrl_b |= 2422 (lse << IBA7322_IBC_SPEED_LSB) | 2423 IBA7322_IBC_IBTA_1_2_MASK | 2424 IBA7322_IBC_MAX_SPEED_MASK; 2425 else 2426 ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ? 2427 IBA7322_IBC_SPEED_QDR | 2428 IBA7322_IBC_IBTA_1_2_MASK : 2429 (lse == QIB_IB_DDR) ? 2430 IBA7322_IBC_SPEED_DDR : 2431 IBA7322_IBC_SPEED_SDR; 2432 if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) == 2433 (IB_WIDTH_1X | IB_WIDTH_4X)) 2434 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG; 2435 else 2436 ppd->cpspec->ibcctrl_b |= 2437 ppd->link_width_enabled == IB_WIDTH_4X ? 2438 IBA7322_IBC_WIDTH_4X_ONLY : 2439 IBA7322_IBC_WIDTH_1X_ONLY; 2440 2441 /* always enable these on driver reload, not sticky */ 2442 ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK | 2443 IBA7322_IBC_HRTBT_MASK); 2444 } 2445 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 2446 2447 /* setup so we have more time at CFGTEST to change H1 */ 2448 val = qib_read_kreg_port(ppd, krp_ibcctrl_c); 2449 val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH); 2450 val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH); 2451 qib_write_kreg_port(ppd, krp_ibcctrl_c, val); 2452 2453 serdes_7322_init(ppd); 2454 2455 guid = be64_to_cpu(ppd->guid); 2456 if (!guid) { 2457 if (dd->base_guid) 2458 guid = be64_to_cpu(dd->base_guid) + ppd->port - 1; 2459 ppd->guid = cpu_to_be64(guid); 2460 } 2461 2462 qib_write_kreg_port(ppd, krp_hrtbt_guid, guid); 2463 /* write to chip to prevent back-to-back writes of ibc reg */ 2464 qib_write_kreg(dd, kr_scratch, 0); 2465 2466 /* Enable port */ 2467 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); 2468 set_vls(ppd); 2469 2470 /* initially come up DISABLED, without sending anything. */ 2471 val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << 2472 QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); 2473 qib_write_kreg_port(ppd, krp_ibcctrl_a, val); 2474 qib_write_kreg(dd, kr_scratch, 0ULL); 2475 /* clear the linkinit cmds */ 2476 ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); 2477 2478 /* be paranoid against later code motion, etc. */ 2479 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 2480 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); 2481 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); 2482 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 2483 2484 /* Also enable IBSTATUSCHG interrupt. */ 2485 val = qib_read_kreg_port(ppd, krp_errmask); 2486 qib_write_kreg_port(ppd, krp_errmask, 2487 val | ERR_MASK_N(IBStatusChanged)); 2488 2489 /* Always zero until we start messing with SerDes for real */ 2490 return 0; 2491 } 2492 2493 /** 2494 * qib_7322_mini_quiet_serdes - set serdes to txidle 2495 * @ppd: the qlogic_ib device 2496 * Called when driver is being unloaded 2497 */ 2498 static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd) 2499 { 2500 u64 val; 2501 unsigned long flags; 2502 2503 qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 2504 2505 spin_lock_irqsave(&ppd->lflags_lock, flags); 2506 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; 2507 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2508 wake_up(&ppd->cpspec->autoneg_wait); 2509 cancel_delayed_work_sync(&ppd->cpspec->autoneg_work); 2510 if (ppd->dd->cspec->r1) 2511 cancel_delayed_work_sync(&ppd->cpspec->ipg_work); 2512 2513 ppd->cpspec->chase_end = 0; 2514 if (ppd->cpspec->chase_timer.function) /* if initted */ 2515 del_timer_sync(&ppd->cpspec->chase_timer); 2516 2517 /* 2518 * Despite the name, actually disables IBC as well. Do it when 2519 * we are as sure as possible that no more packets can be 2520 * received, following the down and the PCS reset. 2521 * The actual disabling happens in qib_7322_mini_pci_reset(), 2522 * along with the PCS being reset. 2523 */ 2524 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); 2525 qib_7322_mini_pcs_reset(ppd); 2526 2527 /* 2528 * Update the adjusted counters so the adjustment persists 2529 * across driver reload. 2530 */ 2531 if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta || 2532 ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) { 2533 struct qib_devdata *dd = ppd->dd; 2534 u64 diagc; 2535 2536 /* enable counter writes */ 2537 diagc = qib_read_kreg64(dd, kr_hwdiagctrl); 2538 qib_write_kreg(dd, kr_hwdiagctrl, 2539 diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); 2540 2541 if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) { 2542 val = read_7322_creg32_port(ppd, crp_ibsymbolerr); 2543 if (ppd->cpspec->ibdeltainprog) 2544 val -= val - ppd->cpspec->ibsymsnap; 2545 val -= ppd->cpspec->ibsymdelta; 2546 write_7322_creg_port(ppd, crp_ibsymbolerr, val); 2547 } 2548 if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) { 2549 val = read_7322_creg32_port(ppd, crp_iblinkerrrecov); 2550 if (ppd->cpspec->ibdeltainprog) 2551 val -= val - ppd->cpspec->iblnkerrsnap; 2552 val -= ppd->cpspec->iblnkerrdelta; 2553 write_7322_creg_port(ppd, crp_iblinkerrrecov, val); 2554 } 2555 if (ppd->cpspec->iblnkdowndelta) { 2556 val = read_7322_creg32_port(ppd, crp_iblinkdown); 2557 val += ppd->cpspec->iblnkdowndelta; 2558 write_7322_creg_port(ppd, crp_iblinkdown, val); 2559 } 2560 /* 2561 * No need to save ibmalfdelta since IB perfcounters 2562 * are cleared on driver reload. 2563 */ 2564 2565 /* and disable counter writes */ 2566 qib_write_kreg(dd, kr_hwdiagctrl, diagc); 2567 } 2568 } 2569 2570 /** 2571 * qib_setup_7322_setextled - set the state of the two external LEDs 2572 * @ppd: physical port on the qlogic_ib device 2573 * @on: whether the link is up or not 2574 * 2575 * The exact combo of LEDs if on is true is determined by looking 2576 * at the ibcstatus. 2577 * 2578 * These LEDs indicate the physical and logical state of IB link. 2579 * For this chip (at least with recommended board pinouts), LED1 2580 * is Yellow (logical state) and LED2 is Green (physical state), 2581 * 2582 * Note: We try to match the Mellanox HCA LED behavior as best 2583 * we can. Green indicates physical link state is OK (something is 2584 * plugged in, and we can train). 2585 * Amber indicates the link is logically up (ACTIVE). 2586 * Mellanox further blinks the amber LED to indicate data packet 2587 * activity, but we have no hardware support for that, so it would 2588 * require waking up every 10-20 msecs and checking the counters 2589 * on the chip, and then turning the LED off if appropriate. That's 2590 * visible overhead, so not something we will do. 2591 */ 2592 static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on) 2593 { 2594 struct qib_devdata *dd = ppd->dd; 2595 u64 extctl, ledblink = 0, val; 2596 unsigned long flags; 2597 int yel, grn; 2598 2599 /* 2600 * The diags use the LED to indicate diag info, so we leave 2601 * the external LED alone when the diags are running. 2602 */ 2603 if (dd->diag_client) 2604 return; 2605 2606 /* Allow override of LED display for, e.g. Locating system in rack */ 2607 if (ppd->led_override) { 2608 grn = (ppd->led_override & QIB_LED_PHYS); 2609 yel = (ppd->led_override & QIB_LED_LOG); 2610 } else if (on) { 2611 val = qib_read_kreg_port(ppd, krp_ibcstatus_a); 2612 grn = qib_7322_phys_portstate(val) == 2613 IB_PHYSPORTSTATE_LINKUP; 2614 yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE; 2615 } else { 2616 grn = 0; 2617 yel = 0; 2618 } 2619 2620 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 2621 extctl = dd->cspec->extctrl & (ppd->port == 1 ? 2622 ~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK); 2623 if (grn) { 2624 extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN; 2625 /* 2626 * Counts are in chip clock (4ns) periods. 2627 * This is 1/16 sec (66.6ms) on, 2628 * 3/16 sec (187.5 ms) off, with packets rcvd. 2629 */ 2630 ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) | 2631 ((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT); 2632 } 2633 if (yel) 2634 extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL; 2635 dd->cspec->extctrl = extctl; 2636 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 2637 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 2638 2639 if (ledblink) /* blink the LED on packet receive */ 2640 qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink); 2641 } 2642 2643 #ifdef CONFIG_INFINIBAND_QIB_DCA 2644 2645 static int qib_7322_notify_dca(struct qib_devdata *dd, unsigned long event) 2646 { 2647 switch (event) { 2648 case DCA_PROVIDER_ADD: 2649 if (dd->flags & QIB_DCA_ENABLED) 2650 break; 2651 if (!dca_add_requester(&dd->pcidev->dev)) { 2652 qib_devinfo(dd->pcidev, "DCA enabled\n"); 2653 dd->flags |= QIB_DCA_ENABLED; 2654 qib_setup_dca(dd); 2655 } 2656 break; 2657 case DCA_PROVIDER_REMOVE: 2658 if (dd->flags & QIB_DCA_ENABLED) { 2659 dca_remove_requester(&dd->pcidev->dev); 2660 dd->flags &= ~QIB_DCA_ENABLED; 2661 dd->cspec->dca_ctrl = 0; 2662 qib_write_kreg(dd, KREG_IDX(DCACtrlA), 2663 dd->cspec->dca_ctrl); 2664 } 2665 break; 2666 } 2667 return 0; 2668 } 2669 2670 static void qib_update_rhdrq_dca(struct qib_ctxtdata *rcd, int cpu) 2671 { 2672 struct qib_devdata *dd = rcd->dd; 2673 struct qib_chip_specific *cspec = dd->cspec; 2674 2675 if (!(dd->flags & QIB_DCA_ENABLED)) 2676 return; 2677 if (cspec->rhdr_cpu[rcd->ctxt] != cpu) { 2678 const struct dca_reg_map *rmp; 2679 2680 cspec->rhdr_cpu[rcd->ctxt] = cpu; 2681 rmp = &dca_rcvhdr_reg_map[rcd->ctxt]; 2682 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] &= rmp->mask; 2683 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] |= 2684 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << rmp->lsb; 2685 qib_devinfo(dd->pcidev, 2686 "Ctxt %d cpu %d dca %llx\n", rcd->ctxt, cpu, 2687 (long long) cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); 2688 qib_write_kreg(dd, rmp->regno, 2689 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); 2690 cspec->dca_ctrl |= SYM_MASK(DCACtrlA, RcvHdrqDCAEnable); 2691 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); 2692 } 2693 } 2694 2695 static void qib_update_sdma_dca(struct qib_pportdata *ppd, int cpu) 2696 { 2697 struct qib_devdata *dd = ppd->dd; 2698 struct qib_chip_specific *cspec = dd->cspec; 2699 unsigned pidx = ppd->port - 1; 2700 2701 if (!(dd->flags & QIB_DCA_ENABLED)) 2702 return; 2703 if (cspec->sdma_cpu[pidx] != cpu) { 2704 cspec->sdma_cpu[pidx] = cpu; 2705 cspec->dca_rcvhdr_ctrl[4] &= ~(ppd->hw_pidx ? 2706 SYM_MASK(DCACtrlF, SendDma1DCAOPH) : 2707 SYM_MASK(DCACtrlF, SendDma0DCAOPH)); 2708 cspec->dca_rcvhdr_ctrl[4] |= 2709 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << 2710 (ppd->hw_pidx ? 2711 SYM_LSB(DCACtrlF, SendDma1DCAOPH) : 2712 SYM_LSB(DCACtrlF, SendDma0DCAOPH)); 2713 qib_devinfo(dd->pcidev, 2714 "sdma %d cpu %d dca %llx\n", ppd->hw_pidx, cpu, 2715 (long long) cspec->dca_rcvhdr_ctrl[4]); 2716 qib_write_kreg(dd, KREG_IDX(DCACtrlF), 2717 cspec->dca_rcvhdr_ctrl[4]); 2718 cspec->dca_ctrl |= ppd->hw_pidx ? 2719 SYM_MASK(DCACtrlA, SendDMAHead1DCAEnable) : 2720 SYM_MASK(DCACtrlA, SendDMAHead0DCAEnable); 2721 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); 2722 } 2723 } 2724 2725 static void qib_setup_dca(struct qib_devdata *dd) 2726 { 2727 struct qib_chip_specific *cspec = dd->cspec; 2728 int i; 2729 2730 for (i = 0; i < ARRAY_SIZE(cspec->rhdr_cpu); i++) 2731 cspec->rhdr_cpu[i] = -1; 2732 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) 2733 cspec->sdma_cpu[i] = -1; 2734 cspec->dca_rcvhdr_ctrl[0] = 2735 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq0DCAXfrCnt)) | 2736 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq1DCAXfrCnt)) | 2737 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq2DCAXfrCnt)) | 2738 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq3DCAXfrCnt)); 2739 cspec->dca_rcvhdr_ctrl[1] = 2740 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq4DCAXfrCnt)) | 2741 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq5DCAXfrCnt)) | 2742 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq6DCAXfrCnt)) | 2743 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq7DCAXfrCnt)); 2744 cspec->dca_rcvhdr_ctrl[2] = 2745 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq8DCAXfrCnt)) | 2746 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq9DCAXfrCnt)) | 2747 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq10DCAXfrCnt)) | 2748 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq11DCAXfrCnt)); 2749 cspec->dca_rcvhdr_ctrl[3] = 2750 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq12DCAXfrCnt)) | 2751 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq13DCAXfrCnt)) | 2752 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq14DCAXfrCnt)) | 2753 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq15DCAXfrCnt)); 2754 cspec->dca_rcvhdr_ctrl[4] = 2755 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq16DCAXfrCnt)) | 2756 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq17DCAXfrCnt)); 2757 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) 2758 qib_write_kreg(dd, KREG_IDX(DCACtrlB) + i, 2759 cspec->dca_rcvhdr_ctrl[i]); 2760 for (i = 0; i < cspec->num_msix_entries; i++) 2761 setup_dca_notifier(dd, i); 2762 } 2763 2764 static void qib_irq_notifier_notify(struct irq_affinity_notify *notify, 2765 const cpumask_t *mask) 2766 { 2767 struct qib_irq_notify *n = 2768 container_of(notify, struct qib_irq_notify, notify); 2769 int cpu = cpumask_first(mask); 2770 2771 if (n->rcv) { 2772 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; 2773 2774 qib_update_rhdrq_dca(rcd, cpu); 2775 } else { 2776 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; 2777 2778 qib_update_sdma_dca(ppd, cpu); 2779 } 2780 } 2781 2782 static void qib_irq_notifier_release(struct kref *ref) 2783 { 2784 struct qib_irq_notify *n = 2785 container_of(ref, struct qib_irq_notify, notify.kref); 2786 struct qib_devdata *dd; 2787 2788 if (n->rcv) { 2789 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; 2790 2791 dd = rcd->dd; 2792 } else { 2793 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; 2794 2795 dd = ppd->dd; 2796 } 2797 qib_devinfo(dd->pcidev, 2798 "release on HCA notify 0x%p n 0x%p\n", ref, n); 2799 kfree(n); 2800 } 2801 #endif 2802 2803 static void qib_7322_free_irq(struct qib_devdata *dd) 2804 { 2805 u64 intgranted; 2806 int i; 2807 2808 dd->cspec->main_int_mask = ~0ULL; 2809 2810 for (i = 0; i < dd->cspec->num_msix_entries; i++) { 2811 /* only free IRQs that were allocated */ 2812 if (dd->cspec->msix_entries[i].arg) { 2813 #ifdef CONFIG_INFINIBAND_QIB_DCA 2814 reset_dca_notifier(dd, i); 2815 #endif 2816 irq_set_affinity_hint(pci_irq_vector(dd->pcidev, i), 2817 NULL); 2818 free_cpumask_var(dd->cspec->msix_entries[i].mask); 2819 pci_free_irq(dd->pcidev, i, 2820 dd->cspec->msix_entries[i].arg); 2821 } 2822 } 2823 2824 /* If num_msix_entries was 0, disable the INTx IRQ */ 2825 if (!dd->cspec->num_msix_entries) 2826 pci_free_irq(dd->pcidev, 0, dd); 2827 else 2828 dd->cspec->num_msix_entries = 0; 2829 2830 pci_free_irq_vectors(dd->pcidev); 2831 2832 /* make sure no MSIx interrupts are left pending */ 2833 intgranted = qib_read_kreg64(dd, kr_intgranted); 2834 if (intgranted) 2835 qib_write_kreg(dd, kr_intgranted, intgranted); 2836 } 2837 2838 static void qib_setup_7322_cleanup(struct qib_devdata *dd) 2839 { 2840 int i; 2841 2842 #ifdef CONFIG_INFINIBAND_QIB_DCA 2843 if (dd->flags & QIB_DCA_ENABLED) { 2844 dca_remove_requester(&dd->pcidev->dev); 2845 dd->flags &= ~QIB_DCA_ENABLED; 2846 dd->cspec->dca_ctrl = 0; 2847 qib_write_kreg(dd, KREG_IDX(DCACtrlA), dd->cspec->dca_ctrl); 2848 } 2849 #endif 2850 2851 qib_7322_free_irq(dd); 2852 kfree(dd->cspec->cntrs); 2853 bitmap_free(dd->cspec->sendchkenable); 2854 bitmap_free(dd->cspec->sendgrhchk); 2855 bitmap_free(dd->cspec->sendibchk); 2856 kfree(dd->cspec->msix_entries); 2857 for (i = 0; i < dd->num_pports; i++) { 2858 unsigned long flags; 2859 u32 mask = QSFP_GPIO_MOD_PRS_N | 2860 (QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT); 2861 2862 kfree(dd->pport[i].cpspec->portcntrs); 2863 if (dd->flags & QIB_HAS_QSFP) { 2864 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 2865 dd->cspec->gpio_mask &= ~mask; 2866 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 2867 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 2868 } 2869 } 2870 } 2871 2872 /* handle SDMA interrupts */ 2873 static void sdma_7322_intr(struct qib_devdata *dd, u64 istat) 2874 { 2875 struct qib_pportdata *ppd0 = &dd->pport[0]; 2876 struct qib_pportdata *ppd1 = &dd->pport[1]; 2877 u64 intr0 = istat & (INT_MASK_P(SDma, 0) | 2878 INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0)); 2879 u64 intr1 = istat & (INT_MASK_P(SDma, 1) | 2880 INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1)); 2881 2882 if (intr0) 2883 qib_sdma_intr(ppd0); 2884 if (intr1) 2885 qib_sdma_intr(ppd1); 2886 2887 if (istat & INT_MASK_PM(SDmaCleanupDone, 0)) 2888 qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started); 2889 if (istat & INT_MASK_PM(SDmaCleanupDone, 1)) 2890 qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started); 2891 } 2892 2893 /* 2894 * Set or clear the Send buffer available interrupt enable bit. 2895 */ 2896 static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint) 2897 { 2898 unsigned long flags; 2899 2900 spin_lock_irqsave(&dd->sendctrl_lock, flags); 2901 if (needint) 2902 dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail); 2903 else 2904 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail); 2905 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); 2906 qib_write_kreg(dd, kr_scratch, 0ULL); 2907 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 2908 } 2909 2910 /* 2911 * Somehow got an interrupt with reserved bits set in interrupt status. 2912 * Print a message so we know it happened, then clear them. 2913 * keep mainline interrupt handler cache-friendly 2914 */ 2915 static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat) 2916 { 2917 u64 kills; 2918 char msg[128]; 2919 2920 kills = istat & ~QIB_I_BITSEXTANT; 2921 qib_dev_err(dd, 2922 "Clearing reserved interrupt(s) 0x%016llx: %s\n", 2923 (unsigned long long) kills, msg); 2924 qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills)); 2925 } 2926 2927 /* keep mainline interrupt handler cache-friendly */ 2928 static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd) 2929 { 2930 u32 gpiostatus; 2931 int handled = 0; 2932 int pidx; 2933 2934 /* 2935 * Boards for this chip currently don't use GPIO interrupts, 2936 * so clear by writing GPIOstatus to GPIOclear, and complain 2937 * to developer. To avoid endless repeats, clear 2938 * the bits in the mask, since there is some kind of 2939 * programming error or chip problem. 2940 */ 2941 gpiostatus = qib_read_kreg32(dd, kr_gpio_status); 2942 /* 2943 * In theory, writing GPIOstatus to GPIOclear could 2944 * have a bad side-effect on some diagnostic that wanted 2945 * to poll for a status-change, but the various shadows 2946 * make that problematic at best. Diags will just suppress 2947 * all GPIO interrupts during such tests. 2948 */ 2949 qib_write_kreg(dd, kr_gpio_clear, gpiostatus); 2950 /* 2951 * Check for QSFP MOD_PRS changes 2952 * only works for single port if IB1 != pidx1 2953 */ 2954 for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP); 2955 ++pidx) { 2956 struct qib_pportdata *ppd; 2957 struct qib_qsfp_data *qd; 2958 u32 mask; 2959 2960 if (!dd->pport[pidx].link_speed_supported) 2961 continue; 2962 mask = QSFP_GPIO_MOD_PRS_N; 2963 ppd = dd->pport + pidx; 2964 mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); 2965 if (gpiostatus & dd->cspec->gpio_mask & mask) { 2966 u64 pins; 2967 2968 qd = &ppd->cpspec->qsfp_data; 2969 gpiostatus &= ~mask; 2970 pins = qib_read_kreg64(dd, kr_extstatus); 2971 pins >>= SYM_LSB(EXTStatus, GPIOIn); 2972 if (!(pins & mask)) { 2973 ++handled; 2974 qd->t_insert = jiffies; 2975 queue_work(ib_wq, &qd->work); 2976 } 2977 } 2978 } 2979 2980 if (gpiostatus && !handled) { 2981 const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); 2982 u32 gpio_irq = mask & gpiostatus; 2983 2984 /* 2985 * Clear any troublemakers, and update chip from shadow 2986 */ 2987 dd->cspec->gpio_mask &= ~gpio_irq; 2988 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 2989 } 2990 } 2991 2992 /* 2993 * Handle errors and unusual events first, separate function 2994 * to improve cache hits for fast path interrupt handling. 2995 */ 2996 static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat) 2997 { 2998 if (istat & ~QIB_I_BITSEXTANT) 2999 unknown_7322_ibits(dd, istat); 3000 if (istat & QIB_I_GPIO) 3001 unknown_7322_gpio_intr(dd); 3002 if (istat & QIB_I_C_ERROR) { 3003 qib_write_kreg(dd, kr_errmask, 0ULL); 3004 tasklet_schedule(&dd->error_tasklet); 3005 } 3006 if (istat & INT_MASK_P(Err, 0) && dd->rcd[0]) 3007 handle_7322_p_errors(dd->rcd[0]->ppd); 3008 if (istat & INT_MASK_P(Err, 1) && dd->rcd[1]) 3009 handle_7322_p_errors(dd->rcd[1]->ppd); 3010 } 3011 3012 /* 3013 * Dynamically adjust the rcv int timeout for a context based on incoming 3014 * packet rate. 3015 */ 3016 static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts) 3017 { 3018 struct qib_devdata *dd = rcd->dd; 3019 u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt]; 3020 3021 /* 3022 * Dynamically adjust idle timeout on chip 3023 * based on number of packets processed. 3024 */ 3025 if (npkts < rcv_int_count && timeout > 2) 3026 timeout >>= 1; 3027 else if (npkts >= rcv_int_count && timeout < rcv_int_timeout) 3028 timeout = min(timeout << 1, rcv_int_timeout); 3029 else 3030 return; 3031 3032 dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout; 3033 qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout); 3034 } 3035 3036 /* 3037 * This is the main interrupt handler. 3038 * It will normally only be used for low frequency interrupts but may 3039 * have to handle all interrupts if INTx is enabled or fewer than normal 3040 * MSIx interrupts were allocated. 3041 * This routine should ignore the interrupt bits for any of the 3042 * dedicated MSIx handlers. 3043 */ 3044 static irqreturn_t qib_7322intr(int irq, void *data) 3045 { 3046 struct qib_devdata *dd = data; 3047 irqreturn_t ret; 3048 u64 istat; 3049 u64 ctxtrbits; 3050 u64 rmask; 3051 unsigned i; 3052 u32 npkts; 3053 3054 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { 3055 /* 3056 * This return value is not great, but we do not want the 3057 * interrupt core code to remove our interrupt handler 3058 * because we don't appear to be handling an interrupt 3059 * during a chip reset. 3060 */ 3061 ret = IRQ_HANDLED; 3062 goto bail; 3063 } 3064 3065 istat = qib_read_kreg64(dd, kr_intstatus); 3066 3067 if (unlikely(istat == ~0ULL)) { 3068 qib_bad_intrstatus(dd); 3069 qib_dev_err(dd, "Interrupt status all f's, skipping\n"); 3070 /* don't know if it was our interrupt or not */ 3071 ret = IRQ_NONE; 3072 goto bail; 3073 } 3074 3075 istat &= dd->cspec->main_int_mask; 3076 if (unlikely(!istat)) { 3077 /* already handled, or shared and not us */ 3078 ret = IRQ_NONE; 3079 goto bail; 3080 } 3081 3082 this_cpu_inc(*dd->int_counter); 3083 3084 /* handle "errors" of various kinds first, device ahead of port */ 3085 if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO | 3086 QIB_I_C_ERROR | INT_MASK_P(Err, 0) | 3087 INT_MASK_P(Err, 1)))) 3088 unlikely_7322_intr(dd, istat); 3089 3090 /* 3091 * Clear the interrupt bits we found set, relatively early, so we 3092 * "know" know the chip will have seen this by the time we process 3093 * the queue, and will re-interrupt if necessary. The processor 3094 * itself won't take the interrupt again until we return. 3095 */ 3096 qib_write_kreg(dd, kr_intclear, istat); 3097 3098 /* 3099 * Handle kernel receive queues before checking for pio buffers 3100 * available since receives can overflow; piobuf waiters can afford 3101 * a few extra cycles, since they were waiting anyway. 3102 */ 3103 ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK); 3104 if (ctxtrbits) { 3105 rmask = (1ULL << QIB_I_RCVAVAIL_LSB) | 3106 (1ULL << QIB_I_RCVURG_LSB); 3107 for (i = 0; i < dd->first_user_ctxt; i++) { 3108 if (ctxtrbits & rmask) { 3109 ctxtrbits &= ~rmask; 3110 if (dd->rcd[i]) 3111 qib_kreceive(dd->rcd[i], NULL, &npkts); 3112 } 3113 rmask <<= 1; 3114 } 3115 if (ctxtrbits) { 3116 ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) | 3117 (ctxtrbits >> QIB_I_RCVURG_LSB); 3118 qib_handle_urcv(dd, ctxtrbits); 3119 } 3120 } 3121 3122 if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1))) 3123 sdma_7322_intr(dd, istat); 3124 3125 if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) 3126 qib_ib_piobufavail(dd); 3127 3128 ret = IRQ_HANDLED; 3129 bail: 3130 return ret; 3131 } 3132 3133 /* 3134 * Dedicated receive packet available interrupt handler. 3135 */ 3136 static irqreturn_t qib_7322pintr(int irq, void *data) 3137 { 3138 struct qib_ctxtdata *rcd = data; 3139 struct qib_devdata *dd = rcd->dd; 3140 u32 npkts; 3141 3142 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3143 /* 3144 * This return value is not great, but we do not want the 3145 * interrupt core code to remove our interrupt handler 3146 * because we don't appear to be handling an interrupt 3147 * during a chip reset. 3148 */ 3149 return IRQ_HANDLED; 3150 3151 this_cpu_inc(*dd->int_counter); 3152 3153 /* Clear the interrupt bit we expect to be set. */ 3154 qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) | 3155 (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt); 3156 3157 qib_kreceive(rcd, NULL, &npkts); 3158 3159 return IRQ_HANDLED; 3160 } 3161 3162 /* 3163 * Dedicated Send buffer available interrupt handler. 3164 */ 3165 static irqreturn_t qib_7322bufavail(int irq, void *data) 3166 { 3167 struct qib_devdata *dd = data; 3168 3169 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3170 /* 3171 * This return value is not great, but we do not want the 3172 * interrupt core code to remove our interrupt handler 3173 * because we don't appear to be handling an interrupt 3174 * during a chip reset. 3175 */ 3176 return IRQ_HANDLED; 3177 3178 this_cpu_inc(*dd->int_counter); 3179 3180 /* Clear the interrupt bit we expect to be set. */ 3181 qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL); 3182 3183 /* qib_ib_piobufavail() will clear the want PIO interrupt if needed */ 3184 if (dd->flags & QIB_INITTED) 3185 qib_ib_piobufavail(dd); 3186 else 3187 qib_wantpiobuf_7322_intr(dd, 0); 3188 3189 return IRQ_HANDLED; 3190 } 3191 3192 /* 3193 * Dedicated Send DMA interrupt handler. 3194 */ 3195 static irqreturn_t sdma_intr(int irq, void *data) 3196 { 3197 struct qib_pportdata *ppd = data; 3198 struct qib_devdata *dd = ppd->dd; 3199 3200 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3201 /* 3202 * This return value is not great, but we do not want the 3203 * interrupt core code to remove our interrupt handler 3204 * because we don't appear to be handling an interrupt 3205 * during a chip reset. 3206 */ 3207 return IRQ_HANDLED; 3208 3209 this_cpu_inc(*dd->int_counter); 3210 3211 /* Clear the interrupt bit we expect to be set. */ 3212 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3213 INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0)); 3214 qib_sdma_intr(ppd); 3215 3216 return IRQ_HANDLED; 3217 } 3218 3219 /* 3220 * Dedicated Send DMA idle interrupt handler. 3221 */ 3222 static irqreturn_t sdma_idle_intr(int irq, void *data) 3223 { 3224 struct qib_pportdata *ppd = data; 3225 struct qib_devdata *dd = ppd->dd; 3226 3227 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3228 /* 3229 * This return value is not great, but we do not want the 3230 * interrupt core code to remove our interrupt handler 3231 * because we don't appear to be handling an interrupt 3232 * during a chip reset. 3233 */ 3234 return IRQ_HANDLED; 3235 3236 this_cpu_inc(*dd->int_counter); 3237 3238 /* Clear the interrupt bit we expect to be set. */ 3239 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3240 INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0)); 3241 qib_sdma_intr(ppd); 3242 3243 return IRQ_HANDLED; 3244 } 3245 3246 /* 3247 * Dedicated Send DMA progress interrupt handler. 3248 */ 3249 static irqreturn_t sdma_progress_intr(int irq, void *data) 3250 { 3251 struct qib_pportdata *ppd = data; 3252 struct qib_devdata *dd = ppd->dd; 3253 3254 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3255 /* 3256 * This return value is not great, but we do not want the 3257 * interrupt core code to remove our interrupt handler 3258 * because we don't appear to be handling an interrupt 3259 * during a chip reset. 3260 */ 3261 return IRQ_HANDLED; 3262 3263 this_cpu_inc(*dd->int_counter); 3264 3265 /* Clear the interrupt bit we expect to be set. */ 3266 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3267 INT_MASK_P(SDmaProgress, 1) : 3268 INT_MASK_P(SDmaProgress, 0)); 3269 qib_sdma_intr(ppd); 3270 3271 return IRQ_HANDLED; 3272 } 3273 3274 /* 3275 * Dedicated Send DMA cleanup interrupt handler. 3276 */ 3277 static irqreturn_t sdma_cleanup_intr(int irq, void *data) 3278 { 3279 struct qib_pportdata *ppd = data; 3280 struct qib_devdata *dd = ppd->dd; 3281 3282 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3283 /* 3284 * This return value is not great, but we do not want the 3285 * interrupt core code to remove our interrupt handler 3286 * because we don't appear to be handling an interrupt 3287 * during a chip reset. 3288 */ 3289 return IRQ_HANDLED; 3290 3291 this_cpu_inc(*dd->int_counter); 3292 3293 /* Clear the interrupt bit we expect to be set. */ 3294 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3295 INT_MASK_PM(SDmaCleanupDone, 1) : 3296 INT_MASK_PM(SDmaCleanupDone, 0)); 3297 qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started); 3298 3299 return IRQ_HANDLED; 3300 } 3301 3302 #ifdef CONFIG_INFINIBAND_QIB_DCA 3303 3304 static void reset_dca_notifier(struct qib_devdata *dd, int msixnum) 3305 { 3306 if (!dd->cspec->msix_entries[msixnum].dca) 3307 return; 3308 3309 qib_devinfo(dd->pcidev, "Disabling notifier on HCA %d irq %d\n", 3310 dd->unit, pci_irq_vector(dd->pcidev, msixnum)); 3311 irq_set_affinity_notifier(pci_irq_vector(dd->pcidev, msixnum), NULL); 3312 dd->cspec->msix_entries[msixnum].notifier = NULL; 3313 } 3314 3315 static void setup_dca_notifier(struct qib_devdata *dd, int msixnum) 3316 { 3317 struct qib_msix_entry *m = &dd->cspec->msix_entries[msixnum]; 3318 struct qib_irq_notify *n; 3319 3320 if (!m->dca) 3321 return; 3322 n = kzalloc(sizeof(*n), GFP_KERNEL); 3323 if (n) { 3324 int ret; 3325 3326 m->notifier = n; 3327 n->notify.irq = pci_irq_vector(dd->pcidev, msixnum); 3328 n->notify.notify = qib_irq_notifier_notify; 3329 n->notify.release = qib_irq_notifier_release; 3330 n->arg = m->arg; 3331 n->rcv = m->rcv; 3332 qib_devinfo(dd->pcidev, 3333 "set notifier irq %d rcv %d notify %p\n", 3334 n->notify.irq, n->rcv, &n->notify); 3335 ret = irq_set_affinity_notifier( 3336 n->notify.irq, 3337 &n->notify); 3338 if (ret) { 3339 m->notifier = NULL; 3340 kfree(n); 3341 } 3342 } 3343 } 3344 3345 #endif 3346 3347 /* 3348 * Set up our chip-specific interrupt handler. 3349 * The interrupt type has already been setup, so 3350 * we just need to do the registration and error checking. 3351 * If we are using MSIx interrupts, we may fall back to 3352 * INTx later, if the interrupt handler doesn't get called 3353 * within 1/2 second (see verify_interrupt()). 3354 */ 3355 static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend) 3356 { 3357 int ret, i, msixnum; 3358 u64 redirect[6]; 3359 u64 mask; 3360 const struct cpumask *local_mask; 3361 int firstcpu, secondcpu = 0, currrcvcpu = 0; 3362 3363 if (!dd->num_pports) 3364 return; 3365 3366 if (clearpend) { 3367 /* 3368 * if not switching interrupt types, be sure interrupts are 3369 * disabled, and then clear anything pending at this point, 3370 * because we are starting clean. 3371 */ 3372 qib_7322_set_intr_state(dd, 0); 3373 3374 /* clear the reset error, init error/hwerror mask */ 3375 qib_7322_init_hwerrors(dd); 3376 3377 /* clear any interrupt bits that might be set */ 3378 qib_write_kreg(dd, kr_intclear, ~0ULL); 3379 3380 /* make sure no pending MSIx intr, and clear diag reg */ 3381 qib_write_kreg(dd, kr_intgranted, ~0ULL); 3382 qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL); 3383 } 3384 3385 if (!dd->cspec->num_msix_entries) { 3386 /* Try to get INTx interrupt */ 3387 try_intx: 3388 ret = pci_request_irq(dd->pcidev, 0, qib_7322intr, NULL, dd, 3389 QIB_DRV_NAME); 3390 if (ret) { 3391 qib_dev_err( 3392 dd, 3393 "Couldn't setup INTx interrupt (irq=%d): %d\n", 3394 pci_irq_vector(dd->pcidev, 0), ret); 3395 return; 3396 } 3397 dd->cspec->main_int_mask = ~0ULL; 3398 return; 3399 } 3400 3401 /* Try to get MSIx interrupts */ 3402 memset(redirect, 0, sizeof(redirect)); 3403 mask = ~0ULL; 3404 msixnum = 0; 3405 local_mask = cpumask_of_pcibus(dd->pcidev->bus); 3406 firstcpu = cpumask_first(local_mask); 3407 if (firstcpu >= nr_cpu_ids || 3408 cpumask_weight(local_mask) == num_online_cpus()) { 3409 local_mask = topology_core_cpumask(0); 3410 firstcpu = cpumask_first(local_mask); 3411 } 3412 if (firstcpu < nr_cpu_ids) { 3413 secondcpu = cpumask_next(firstcpu, local_mask); 3414 if (secondcpu >= nr_cpu_ids) 3415 secondcpu = firstcpu; 3416 currrcvcpu = secondcpu; 3417 } 3418 for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) { 3419 irq_handler_t handler; 3420 void *arg; 3421 int lsb, reg, sh; 3422 #ifdef CONFIG_INFINIBAND_QIB_DCA 3423 int dca = 0; 3424 #endif 3425 if (i < ARRAY_SIZE(irq_table)) { 3426 if (irq_table[i].port) { 3427 /* skip if for a non-configured port */ 3428 if (irq_table[i].port > dd->num_pports) 3429 continue; 3430 arg = dd->pport + irq_table[i].port - 1; 3431 } else 3432 arg = dd; 3433 #ifdef CONFIG_INFINIBAND_QIB_DCA 3434 dca = irq_table[i].dca; 3435 #endif 3436 lsb = irq_table[i].lsb; 3437 handler = irq_table[i].handler; 3438 ret = pci_request_irq(dd->pcidev, msixnum, handler, 3439 NULL, arg, QIB_DRV_NAME "%d%s", 3440 dd->unit, 3441 irq_table[i].name); 3442 } else { 3443 unsigned ctxt; 3444 3445 ctxt = i - ARRAY_SIZE(irq_table); 3446 /* per krcvq context receive interrupt */ 3447 arg = dd->rcd[ctxt]; 3448 if (!arg) 3449 continue; 3450 if (qib_krcvq01_no_msi && ctxt < 2) 3451 continue; 3452 #ifdef CONFIG_INFINIBAND_QIB_DCA 3453 dca = 1; 3454 #endif 3455 lsb = QIB_I_RCVAVAIL_LSB + ctxt; 3456 handler = qib_7322pintr; 3457 ret = pci_request_irq(dd->pcidev, msixnum, handler, 3458 NULL, arg, 3459 QIB_DRV_NAME "%d (kctx)", 3460 dd->unit); 3461 } 3462 3463 if (ret) { 3464 /* 3465 * Shouldn't happen since the enable said we could 3466 * have as many as we are trying to setup here. 3467 */ 3468 qib_dev_err(dd, 3469 "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n", 3470 msixnum, 3471 pci_irq_vector(dd->pcidev, msixnum), 3472 ret); 3473 qib_7322_free_irq(dd); 3474 pci_alloc_irq_vectors(dd->pcidev, 1, 1, PCI_IRQ_INTX); 3475 goto try_intx; 3476 } 3477 dd->cspec->msix_entries[msixnum].arg = arg; 3478 #ifdef CONFIG_INFINIBAND_QIB_DCA 3479 dd->cspec->msix_entries[msixnum].dca = dca; 3480 dd->cspec->msix_entries[msixnum].rcv = 3481 handler == qib_7322pintr; 3482 #endif 3483 if (lsb >= 0) { 3484 reg = lsb / IBA7322_REDIRECT_VEC_PER_REG; 3485 sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) * 3486 SYM_LSB(IntRedirect0, vec1); 3487 mask &= ~(1ULL << lsb); 3488 redirect[reg] |= ((u64) msixnum) << sh; 3489 } 3490 qib_read_kreg64(dd, 2 * msixnum + 1 + 3491 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3492 if (firstcpu < nr_cpu_ids && 3493 zalloc_cpumask_var( 3494 &dd->cspec->msix_entries[msixnum].mask, 3495 GFP_KERNEL)) { 3496 if (handler == qib_7322pintr) { 3497 cpumask_set_cpu(currrcvcpu, 3498 dd->cspec->msix_entries[msixnum].mask); 3499 currrcvcpu = cpumask_next(currrcvcpu, 3500 local_mask); 3501 if (currrcvcpu >= nr_cpu_ids) 3502 currrcvcpu = secondcpu; 3503 } else { 3504 cpumask_set_cpu(firstcpu, 3505 dd->cspec->msix_entries[msixnum].mask); 3506 } 3507 irq_set_affinity_hint( 3508 pci_irq_vector(dd->pcidev, msixnum), 3509 dd->cspec->msix_entries[msixnum].mask); 3510 } 3511 msixnum++; 3512 } 3513 /* Initialize the vector mapping */ 3514 for (i = 0; i < ARRAY_SIZE(redirect); i++) 3515 qib_write_kreg(dd, kr_intredirect + i, redirect[i]); 3516 dd->cspec->main_int_mask = mask; 3517 tasklet_setup(&dd->error_tasklet, qib_error_tasklet); 3518 } 3519 3520 /** 3521 * qib_7322_boardname - fill in the board name and note features 3522 * @dd: the qlogic_ib device 3523 * 3524 * info will be based on the board revision register 3525 */ 3526 static unsigned qib_7322_boardname(struct qib_devdata *dd) 3527 { 3528 /* Will need enumeration of board-types here */ 3529 u32 boardid; 3530 unsigned int features = DUAL_PORT_CAP; 3531 3532 boardid = SYM_FIELD(dd->revision, Revision, BoardID); 3533 3534 switch (boardid) { 3535 case 0: 3536 dd->boardname = "InfiniPath_QLE7342_Emulation"; 3537 break; 3538 case 1: 3539 dd->boardname = "InfiniPath_QLE7340"; 3540 dd->flags |= QIB_HAS_QSFP; 3541 features = PORT_SPD_CAP; 3542 break; 3543 case 2: 3544 dd->boardname = "InfiniPath_QLE7342"; 3545 dd->flags |= QIB_HAS_QSFP; 3546 break; 3547 case 3: 3548 dd->boardname = "InfiniPath_QMI7342"; 3549 break; 3550 case 4: 3551 dd->boardname = "InfiniPath_Unsupported7342"; 3552 qib_dev_err(dd, "Unsupported version of QMH7342\n"); 3553 features = 0; 3554 break; 3555 case BOARD_QMH7342: 3556 dd->boardname = "InfiniPath_QMH7342"; 3557 features = 0x24; 3558 break; 3559 case BOARD_QME7342: 3560 dd->boardname = "InfiniPath_QME7342"; 3561 break; 3562 case 8: 3563 dd->boardname = "InfiniPath_QME7362"; 3564 dd->flags |= QIB_HAS_QSFP; 3565 break; 3566 case BOARD_QMH7360: 3567 dd->boardname = "Intel IB QDR 1P FLR-QSFP Adptr"; 3568 dd->flags |= QIB_HAS_QSFP; 3569 break; 3570 case 15: 3571 dd->boardname = "InfiniPath_QLE7342_TEST"; 3572 dd->flags |= QIB_HAS_QSFP; 3573 break; 3574 default: 3575 dd->boardname = "InfiniPath_QLE73xy_UNKNOWN"; 3576 qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid); 3577 break; 3578 } 3579 dd->board_atten = 1; /* index into txdds_Xdr */ 3580 3581 snprintf(dd->boardversion, sizeof(dd->boardversion), 3582 "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", 3583 QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, 3584 (unsigned int)SYM_FIELD(dd->revision, Revision_R, Arch), 3585 dd->majrev, dd->minrev, 3586 (unsigned int)SYM_FIELD(dd->revision, Revision_R, SW)); 3587 3588 if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) { 3589 qib_devinfo(dd->pcidev, 3590 "IB%u: Forced to single port mode by module parameter\n", 3591 dd->unit); 3592 features &= PORT_SPD_CAP; 3593 } 3594 3595 return features; 3596 } 3597 3598 /* 3599 * This routine sleeps, so it can only be called from user context, not 3600 * from interrupt context. 3601 */ 3602 static int qib_do_7322_reset(struct qib_devdata *dd) 3603 { 3604 u64 val; 3605 u64 *msix_vecsave = NULL; 3606 int i, msix_entries, ret = 1; 3607 u16 cmdval; 3608 u8 int_line, clinesz; 3609 unsigned long flags; 3610 3611 /* Use dev_err so it shows up in logs, etc. */ 3612 qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); 3613 3614 qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); 3615 3616 msix_entries = dd->cspec->num_msix_entries; 3617 3618 /* no interrupts till re-initted */ 3619 qib_7322_set_intr_state(dd, 0); 3620 3621 qib_7322_free_irq(dd); 3622 3623 if (msix_entries) { 3624 /* can be up to 512 bytes, too big for stack */ 3625 msix_vecsave = kmalloc_array(2 * dd->cspec->num_msix_entries, 3626 sizeof(u64), 3627 GFP_KERNEL); 3628 } 3629 3630 /* 3631 * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector 3632 * info that is set up by the BIOS, so we have to save and restore 3633 * it ourselves. There is some risk something could change it, 3634 * after we save it, but since we have disabled the MSIx, it 3635 * shouldn't be touched... 3636 */ 3637 for (i = 0; i < msix_entries; i++) { 3638 u64 vecaddr, vecdata; 3639 3640 vecaddr = qib_read_kreg64(dd, 2 * i + 3641 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3642 vecdata = qib_read_kreg64(dd, 1 + 2 * i + 3643 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3644 if (msix_vecsave) { 3645 msix_vecsave[2 * i] = vecaddr; 3646 /* save it without the masked bit set */ 3647 msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL; 3648 } 3649 } 3650 3651 dd->pport->cpspec->ibdeltainprog = 0; 3652 dd->pport->cpspec->ibsymdelta = 0; 3653 dd->pport->cpspec->iblnkerrdelta = 0; 3654 dd->pport->cpspec->ibmalfdelta = 0; 3655 /* so we check interrupts work again */ 3656 dd->z_int_counter = qib_int_counter(dd); 3657 3658 /* 3659 * Keep chip from being accessed until we are ready. Use 3660 * writeq() directly, to allow the write even though QIB_PRESENT 3661 * isn't set. 3662 */ 3663 dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); 3664 dd->flags |= QIB_DOING_RESET; 3665 val = dd->control | QLOGIC_IB_C_RESET; 3666 writeq(val, &dd->kregbase[kr_control]); 3667 3668 for (i = 1; i <= 5; i++) { 3669 /* 3670 * Allow MBIST, etc. to complete; longer on each retry. 3671 * We sometimes get machine checks from bus timeout if no 3672 * response, so for now, make it *really* long. 3673 */ 3674 msleep(1000 + (1 + i) * 3000); 3675 3676 qib_pcie_reenable(dd, cmdval, int_line, clinesz); 3677 3678 /* 3679 * Use readq directly, so we don't need to mark it as PRESENT 3680 * until we get a successful indication that all is well. 3681 */ 3682 val = readq(&dd->kregbase[kr_revision]); 3683 if (val == dd->revision) 3684 break; 3685 if (i == 5) { 3686 qib_dev_err(dd, 3687 "Failed to initialize after reset, unusable\n"); 3688 ret = 0; 3689 goto bail; 3690 } 3691 } 3692 3693 dd->flags |= QIB_PRESENT; /* it's back */ 3694 3695 if (msix_entries) { 3696 /* restore the MSIx vector address and data if saved above */ 3697 for (i = 0; i < msix_entries; i++) { 3698 if (!msix_vecsave || !msix_vecsave[2 * i]) 3699 continue; 3700 qib_write_kreg(dd, 2 * i + 3701 (QIB_7322_MsixTable_OFFS / sizeof(u64)), 3702 msix_vecsave[2 * i]); 3703 qib_write_kreg(dd, 1 + 2 * i + 3704 (QIB_7322_MsixTable_OFFS / sizeof(u64)), 3705 msix_vecsave[1 + 2 * i]); 3706 } 3707 } 3708 3709 /* initialize the remaining registers. */ 3710 for (i = 0; i < dd->num_pports; ++i) 3711 write_7322_init_portregs(&dd->pport[i]); 3712 write_7322_initregs(dd); 3713 3714 if (qib_pcie_params(dd, dd->lbus_width, &msix_entries)) 3715 qib_dev_err(dd, 3716 "Reset failed to setup PCIe or interrupts; continuing anyway\n"); 3717 3718 dd->cspec->num_msix_entries = msix_entries; 3719 qib_setup_7322_interrupt(dd, 1); 3720 3721 for (i = 0; i < dd->num_pports; ++i) { 3722 struct qib_pportdata *ppd = &dd->pport[i]; 3723 3724 spin_lock_irqsave(&ppd->lflags_lock, flags); 3725 ppd->lflags |= QIBL_IB_FORCE_NOTIFY; 3726 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 3727 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 3728 } 3729 3730 bail: 3731 dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */ 3732 kfree(msix_vecsave); 3733 return ret; 3734 } 3735 3736 /** 3737 * qib_7322_put_tid - write a TID to the chip 3738 * @dd: the qlogic_ib device 3739 * @tidptr: pointer to the expected TID (in chip) to update 3740 * @type: 0 for eager, 1 for expected 3741 * @pa: physical address of in memory buffer; tidinvalid if freeing 3742 */ 3743 static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, 3744 u32 type, unsigned long pa) 3745 { 3746 if (!(dd->flags & QIB_PRESENT)) 3747 return; 3748 if (pa != dd->tidinvalid) { 3749 u64 chippa = pa >> IBA7322_TID_PA_SHIFT; 3750 3751 /* paranoia checks */ 3752 if (pa != (chippa << IBA7322_TID_PA_SHIFT)) { 3753 qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", 3754 pa); 3755 return; 3756 } 3757 if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) { 3758 qib_dev_err(dd, 3759 "Physical page address 0x%lx larger than supported\n", 3760 pa); 3761 return; 3762 } 3763 3764 if (type == RCVHQ_RCV_TYPE_EAGER) 3765 chippa |= dd->tidtemplate; 3766 else /* for now, always full 4KB page */ 3767 chippa |= IBA7322_TID_SZ_4K; 3768 pa = chippa; 3769 } 3770 writeq(pa, tidptr); 3771 } 3772 3773 /** 3774 * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager 3775 * @dd: the qlogic_ib device 3776 * @rcd: the ctxt 3777 * 3778 * clear all TID entries for a ctxt, expected and eager. 3779 * Used from qib_close(). 3780 */ 3781 static void qib_7322_clear_tids(struct qib_devdata *dd, 3782 struct qib_ctxtdata *rcd) 3783 { 3784 u64 __iomem *tidbase; 3785 unsigned long tidinv; 3786 u32 ctxt; 3787 int i; 3788 3789 if (!dd->kregbase || !rcd) 3790 return; 3791 3792 ctxt = rcd->ctxt; 3793 3794 tidinv = dd->tidinvalid; 3795 tidbase = (u64 __iomem *) 3796 ((char __iomem *) dd->kregbase + 3797 dd->rcvtidbase + 3798 ctxt * dd->rcvtidcnt * sizeof(*tidbase)); 3799 3800 for (i = 0; i < dd->rcvtidcnt; i++) 3801 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, 3802 tidinv); 3803 3804 tidbase = (u64 __iomem *) 3805 ((char __iomem *) dd->kregbase + 3806 dd->rcvegrbase + 3807 rcd->rcvegr_tid_base * sizeof(*tidbase)); 3808 3809 for (i = 0; i < rcd->rcvegrcnt; i++) 3810 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, 3811 tidinv); 3812 } 3813 3814 /** 3815 * qib_7322_tidtemplate - setup constants for TID updates 3816 * @dd: the qlogic_ib device 3817 * 3818 * We setup stuff that we use a lot, to avoid calculating each time 3819 */ 3820 static void qib_7322_tidtemplate(struct qib_devdata *dd) 3821 { 3822 /* 3823 * For now, we always allocate 4KB buffers (at init) so we can 3824 * receive max size packets. We may want a module parameter to 3825 * specify 2KB or 4KB and/or make it per port instead of per device 3826 * for those who want to reduce memory footprint. Note that the 3827 * rcvhdrentsize size must be large enough to hold the largest 3828 * IB header (currently 96 bytes) that we expect to handle (plus of 3829 * course the 2 dwords of RHF). 3830 */ 3831 if (dd->rcvegrbufsize == 2048) 3832 dd->tidtemplate = IBA7322_TID_SZ_2K; 3833 else if (dd->rcvegrbufsize == 4096) 3834 dd->tidtemplate = IBA7322_TID_SZ_4K; 3835 dd->tidinvalid = 0; 3836 } 3837 3838 /** 3839 * qib_7322_get_base_info - set chip-specific flags for user code 3840 * @rcd: the qlogic_ib ctxt 3841 * @kinfo: qib_base_info pointer 3842 * 3843 * We set the PCIE flag because the lower bandwidth on PCIe vs 3844 * HyperTransport can affect some user packet algorithims. 3845 */ 3846 3847 static int qib_7322_get_base_info(struct qib_ctxtdata *rcd, 3848 struct qib_base_info *kinfo) 3849 { 3850 kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP | 3851 QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL | 3852 QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA; 3853 if (rcd->dd->cspec->r1) 3854 kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK; 3855 if (rcd->dd->flags & QIB_USE_SPCL_TRIG) 3856 kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER; 3857 3858 return 0; 3859 } 3860 3861 static struct qib_message_header * 3862 qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) 3863 { 3864 u32 offset = qib_hdrget_offset(rhf_addr); 3865 3866 return (struct qib_message_header *) 3867 (rhf_addr - dd->rhf_offset + offset); 3868 } 3869 3870 /* 3871 * Configure number of contexts. 3872 */ 3873 static void qib_7322_config_ctxts(struct qib_devdata *dd) 3874 { 3875 unsigned long flags; 3876 u32 nchipctxts; 3877 3878 nchipctxts = qib_read_kreg32(dd, kr_contextcnt); 3879 dd->cspec->numctxts = nchipctxts; 3880 if (qib_n_krcv_queues > 1 && dd->num_pports) { 3881 dd->first_user_ctxt = NUM_IB_PORTS + 3882 (qib_n_krcv_queues - 1) * dd->num_pports; 3883 if (dd->first_user_ctxt > nchipctxts) 3884 dd->first_user_ctxt = nchipctxts; 3885 dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports; 3886 } else { 3887 dd->first_user_ctxt = NUM_IB_PORTS; 3888 dd->n_krcv_queues = 1; 3889 } 3890 3891 if (!qib_cfgctxts) { 3892 int nctxts = dd->first_user_ctxt + num_online_cpus(); 3893 3894 if (nctxts <= 6) 3895 dd->ctxtcnt = 6; 3896 else if (nctxts <= 10) 3897 dd->ctxtcnt = 10; 3898 else if (nctxts <= nchipctxts) 3899 dd->ctxtcnt = nchipctxts; 3900 } else if (qib_cfgctxts < dd->num_pports) 3901 dd->ctxtcnt = dd->num_pports; 3902 else if (qib_cfgctxts <= nchipctxts) 3903 dd->ctxtcnt = qib_cfgctxts; 3904 if (!dd->ctxtcnt) /* none of the above, set to max */ 3905 dd->ctxtcnt = nchipctxts; 3906 3907 /* 3908 * Chip can be configured for 6, 10, or 18 ctxts, and choice 3909 * affects number of eager TIDs per ctxt (1K, 2K, 4K). 3910 * Lock to be paranoid about later motion, etc. 3911 */ 3912 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 3913 if (dd->ctxtcnt > 10) 3914 dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg); 3915 else if (dd->ctxtcnt > 6) 3916 dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg); 3917 /* else configure for default 6 receive ctxts */ 3918 3919 /* The XRC opcode is 5. */ 3920 dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode); 3921 3922 /* 3923 * RcvCtrl *must* be written here so that the 3924 * chip understands how to change rcvegrcnt below. 3925 */ 3926 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); 3927 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 3928 3929 /* kr_rcvegrcnt changes based on the number of contexts enabled */ 3930 dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); 3931 if (qib_rcvhdrcnt) 3932 dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, qib_rcvhdrcnt); 3933 else 3934 dd->rcvhdrcnt = 2 * max(dd->cspec->rcvegrcnt, 3935 dd->num_pports > 1 ? 1024U : 2048U); 3936 } 3937 3938 static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which) 3939 { 3940 3941 int lsb, ret = 0; 3942 u64 maskr; /* right-justified mask */ 3943 3944 switch (which) { 3945 3946 case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */ 3947 ret = ppd->link_width_enabled; 3948 goto done; 3949 3950 case QIB_IB_CFG_LWID: /* Get currently active Link-width */ 3951 ret = ppd->link_width_active; 3952 goto done; 3953 3954 case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */ 3955 ret = ppd->link_speed_enabled; 3956 goto done; 3957 3958 case QIB_IB_CFG_SPD: /* Get current Link spd */ 3959 ret = ppd->link_speed_active; 3960 goto done; 3961 3962 case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */ 3963 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 3964 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 3965 break; 3966 3967 case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */ 3968 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 3969 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 3970 break; 3971 3972 case QIB_IB_CFG_LINKLATENCY: 3973 ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) & 3974 SYM_MASK(IBCStatusB_0, LinkRoundTripLatency); 3975 goto done; 3976 3977 case QIB_IB_CFG_OP_VLS: 3978 ret = ppd->vls_operational; 3979 goto done; 3980 3981 case QIB_IB_CFG_VL_HIGH_CAP: 3982 ret = 16; 3983 goto done; 3984 3985 case QIB_IB_CFG_VL_LOW_CAP: 3986 ret = 16; 3987 goto done; 3988 3989 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ 3990 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 3991 OverrunThreshold); 3992 goto done; 3993 3994 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ 3995 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 3996 PhyerrThreshold); 3997 goto done; 3998 3999 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ 4000 /* will only take effect when the link state changes */ 4001 ret = (ppd->cpspec->ibcctrl_a & 4002 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ? 4003 IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; 4004 goto done; 4005 4006 case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ 4007 lsb = IBA7322_IBC_HRTBT_LSB; 4008 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ 4009 break; 4010 4011 case QIB_IB_CFG_PMA_TICKS: 4012 /* 4013 * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs 4014 * Since the clock is always 250MHz, the value is 3, 1 or 0. 4015 */ 4016 if (ppd->link_speed_active == QIB_IB_QDR) 4017 ret = 3; 4018 else if (ppd->link_speed_active == QIB_IB_DDR) 4019 ret = 1; 4020 else 4021 ret = 0; 4022 goto done; 4023 4024 default: 4025 ret = -EINVAL; 4026 goto done; 4027 } 4028 ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr); 4029 done: 4030 return ret; 4031 } 4032 4033 /* 4034 * Below again cribbed liberally from older version. Do not lean 4035 * heavily on it. 4036 */ 4037 #define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB 4038 #define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \ 4039 | (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16)) 4040 4041 static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) 4042 { 4043 struct qib_devdata *dd = ppd->dd; 4044 u64 maskr; /* right-justified mask */ 4045 int lsb, ret = 0; 4046 u16 lcmd, licmd; 4047 unsigned long flags; 4048 4049 switch (which) { 4050 case QIB_IB_CFG_LIDLMC: 4051 /* 4052 * Set LID and LMC. Combined to avoid possible hazard 4053 * caller puts LMC in 16MSbits, DLID in 16LSbits of val 4054 */ 4055 lsb = IBA7322_IBC_DLIDLMC_SHIFT; 4056 maskr = IBA7322_IBC_DLIDLMC_MASK; 4057 /* 4058 * For header-checking, the SLID in the packet will 4059 * be masked with SendIBSLMCMask, and compared 4060 * with SendIBSLIDAssignMask. Make sure we do not 4061 * set any bits not covered by the mask, or we get 4062 * false-positives. 4063 */ 4064 qib_write_kreg_port(ppd, krp_sendslid, 4065 val & (val >> 16) & SendIBSLIDAssignMask); 4066 qib_write_kreg_port(ppd, krp_sendslidmask, 4067 (val >> 16) & SendIBSLMCMask); 4068 break; 4069 4070 case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */ 4071 ppd->link_width_enabled = val; 4072 /* convert IB value to chip register value */ 4073 if (val == IB_WIDTH_1X) 4074 val = 0; 4075 else if (val == IB_WIDTH_4X) 4076 val = 1; 4077 else 4078 val = 3; 4079 maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS); 4080 lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS); 4081 break; 4082 4083 case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */ 4084 /* 4085 * As with width, only write the actual register if the 4086 * link is currently down, otherwise takes effect on next 4087 * link change. Since setting is being explicitly requested 4088 * (via MAD or sysfs), clear autoneg failure status if speed 4089 * autoneg is enabled. 4090 */ 4091 ppd->link_speed_enabled = val; 4092 val <<= IBA7322_IBC_SPEED_LSB; 4093 maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK | 4094 IBA7322_IBC_MAX_SPEED_MASK; 4095 if (val & (val - 1)) { 4096 /* Muliple speeds enabled */ 4097 val |= IBA7322_IBC_IBTA_1_2_MASK | 4098 IBA7322_IBC_MAX_SPEED_MASK; 4099 spin_lock_irqsave(&ppd->lflags_lock, flags); 4100 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 4101 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 4102 } else if (val & IBA7322_IBC_SPEED_QDR) 4103 val |= IBA7322_IBC_IBTA_1_2_MASK; 4104 /* IBTA 1.2 mode + min/max + speed bits are contiguous */ 4105 lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE); 4106 break; 4107 4108 case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */ 4109 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4110 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4111 break; 4112 4113 case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */ 4114 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4115 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4116 break; 4117 4118 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ 4119 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4120 OverrunThreshold); 4121 if (maskr != val) { 4122 ppd->cpspec->ibcctrl_a &= 4123 ~SYM_MASK(IBCCtrlA_0, OverrunThreshold); 4124 ppd->cpspec->ibcctrl_a |= (u64) val << 4125 SYM_LSB(IBCCtrlA_0, OverrunThreshold); 4126 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4127 ppd->cpspec->ibcctrl_a); 4128 qib_write_kreg(dd, kr_scratch, 0ULL); 4129 } 4130 goto bail; 4131 4132 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ 4133 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4134 PhyerrThreshold); 4135 if (maskr != val) { 4136 ppd->cpspec->ibcctrl_a &= 4137 ~SYM_MASK(IBCCtrlA_0, PhyerrThreshold); 4138 ppd->cpspec->ibcctrl_a |= (u64) val << 4139 SYM_LSB(IBCCtrlA_0, PhyerrThreshold); 4140 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4141 ppd->cpspec->ibcctrl_a); 4142 qib_write_kreg(dd, kr_scratch, 0ULL); 4143 } 4144 goto bail; 4145 4146 case QIB_IB_CFG_PKEYS: /* update pkeys */ 4147 maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | 4148 ((u64) ppd->pkeys[2] << 32) | 4149 ((u64) ppd->pkeys[3] << 48); 4150 qib_write_kreg_port(ppd, krp_partitionkey, maskr); 4151 goto bail; 4152 4153 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ 4154 /* will only take effect when the link state changes */ 4155 if (val == IB_LINKINITCMD_POLL) 4156 ppd->cpspec->ibcctrl_a &= 4157 ~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); 4158 else /* SLEEP */ 4159 ppd->cpspec->ibcctrl_a |= 4160 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); 4161 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 4162 qib_write_kreg(dd, kr_scratch, 0ULL); 4163 goto bail; 4164 4165 case QIB_IB_CFG_MTU: /* update the MTU in IBC */ 4166 /* 4167 * Update our housekeeping variables, and set IBC max 4168 * size, same as init code; max IBC is max we allow in 4169 * buffer, less the qword pbc, plus 1 for ICRC, in dwords 4170 * Set even if it's unchanged, print debug message only 4171 * on changes. 4172 */ 4173 val = (ppd->ibmaxlen >> 2) + 1; 4174 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen); 4175 ppd->cpspec->ibcctrl_a |= (u64)val << 4176 SYM_LSB(IBCCtrlA_0, MaxPktLen); 4177 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4178 ppd->cpspec->ibcctrl_a); 4179 qib_write_kreg(dd, kr_scratch, 0ULL); 4180 goto bail; 4181 4182 case QIB_IB_CFG_LSTATE: /* set the IB link state */ 4183 switch (val & 0xffff0000) { 4184 case IB_LINKCMD_DOWN: 4185 lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; 4186 ppd->cpspec->ibmalfusesnap = 1; 4187 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, 4188 crp_errlink); 4189 if (!ppd->cpspec->ibdeltainprog && 4190 qib_compat_ddr_negotiate) { 4191 ppd->cpspec->ibdeltainprog = 1; 4192 ppd->cpspec->ibsymsnap = 4193 read_7322_creg32_port(ppd, 4194 crp_ibsymbolerr); 4195 ppd->cpspec->iblnkerrsnap = 4196 read_7322_creg32_port(ppd, 4197 crp_iblinkerrrecov); 4198 } 4199 break; 4200 4201 case IB_LINKCMD_ARMED: 4202 lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; 4203 if (ppd->cpspec->ibmalfusesnap) { 4204 ppd->cpspec->ibmalfusesnap = 0; 4205 ppd->cpspec->ibmalfdelta += 4206 read_7322_creg32_port(ppd, 4207 crp_errlink) - 4208 ppd->cpspec->ibmalfsnap; 4209 } 4210 break; 4211 4212 case IB_LINKCMD_ACTIVE: 4213 lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; 4214 break; 4215 4216 default: 4217 ret = -EINVAL; 4218 qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); 4219 goto bail; 4220 } 4221 switch (val & 0xffff) { 4222 case IB_LINKINITCMD_NOP: 4223 licmd = 0; 4224 break; 4225 4226 case IB_LINKINITCMD_POLL: 4227 licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; 4228 break; 4229 4230 case IB_LINKINITCMD_SLEEP: 4231 licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; 4232 break; 4233 4234 case IB_LINKINITCMD_DISABLE: 4235 licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; 4236 ppd->cpspec->chase_end = 0; 4237 /* 4238 * stop state chase counter and timer, if running. 4239 * wait forpending timer, but don't clear .data (ppd)! 4240 */ 4241 if (ppd->cpspec->chase_timer.expires) { 4242 del_timer_sync(&ppd->cpspec->chase_timer); 4243 ppd->cpspec->chase_timer.expires = 0; 4244 } 4245 break; 4246 4247 default: 4248 ret = -EINVAL; 4249 qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", 4250 val & 0xffff); 4251 goto bail; 4252 } 4253 qib_set_ib_7322_lstate(ppd, lcmd, licmd); 4254 goto bail; 4255 4256 case QIB_IB_CFG_OP_VLS: 4257 if (ppd->vls_operational != val) { 4258 ppd->vls_operational = val; 4259 set_vls(ppd); 4260 } 4261 goto bail; 4262 4263 case QIB_IB_CFG_VL_HIGH_LIMIT: 4264 qib_write_kreg_port(ppd, krp_highprio_limit, val); 4265 goto bail; 4266 4267 case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */ 4268 if (val > 3) { 4269 ret = -EINVAL; 4270 goto bail; 4271 } 4272 lsb = IBA7322_IBC_HRTBT_LSB; 4273 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ 4274 break; 4275 4276 case QIB_IB_CFG_PORT: 4277 /* val is the port number of the switch we are connected to. */ 4278 if (ppd->dd->cspec->r1) { 4279 cancel_delayed_work(&ppd->cpspec->ipg_work); 4280 ppd->cpspec->ipg_tries = 0; 4281 } 4282 goto bail; 4283 4284 default: 4285 ret = -EINVAL; 4286 goto bail; 4287 } 4288 ppd->cpspec->ibcctrl_b &= ~(maskr << lsb); 4289 ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb); 4290 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 4291 qib_write_kreg(dd, kr_scratch, 0); 4292 bail: 4293 return ret; 4294 } 4295 4296 static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what) 4297 { 4298 int ret = 0; 4299 u64 val, ctrlb; 4300 4301 /* only IBC loopback, may add serdes and xgxs loopbacks later */ 4302 if (!strncmp(what, "ibc", 3)) { 4303 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, 4304 Loopback); 4305 val = 0; /* disable heart beat, so link will come up */ 4306 qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", 4307 ppd->dd->unit, ppd->port); 4308 } else if (!strncmp(what, "off", 3)) { 4309 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, 4310 Loopback); 4311 /* enable heart beat again */ 4312 val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB; 4313 qib_devinfo(ppd->dd->pcidev, 4314 "Disabling IB%u:%u IBC loopback (normal)\n", 4315 ppd->dd->unit, ppd->port); 4316 } else 4317 ret = -EINVAL; 4318 if (!ret) { 4319 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4320 ppd->cpspec->ibcctrl_a); 4321 ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK 4322 << IBA7322_IBC_HRTBT_LSB); 4323 ppd->cpspec->ibcctrl_b = ctrlb | val; 4324 qib_write_kreg_port(ppd, krp_ibcctrl_b, 4325 ppd->cpspec->ibcctrl_b); 4326 qib_write_kreg(ppd->dd, kr_scratch, 0); 4327 } 4328 return ret; 4329 } 4330 4331 static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno, 4332 struct ib_vl_weight_elem *vl) 4333 { 4334 unsigned i; 4335 4336 for (i = 0; i < 16; i++, regno++, vl++) { 4337 u32 val = qib_read_kreg_port(ppd, regno); 4338 4339 vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) & 4340 SYM_RMASK(LowPriority0_0, VirtualLane); 4341 vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) & 4342 SYM_RMASK(LowPriority0_0, Weight); 4343 } 4344 } 4345 4346 static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno, 4347 struct ib_vl_weight_elem *vl) 4348 { 4349 unsigned i; 4350 4351 for (i = 0; i < 16; i++, regno++, vl++) { 4352 u64 val; 4353 4354 val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) << 4355 SYM_LSB(LowPriority0_0, VirtualLane)) | 4356 ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) << 4357 SYM_LSB(LowPriority0_0, Weight)); 4358 qib_write_kreg_port(ppd, regno, val); 4359 } 4360 if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) { 4361 struct qib_devdata *dd = ppd->dd; 4362 unsigned long flags; 4363 4364 spin_lock_irqsave(&dd->sendctrl_lock, flags); 4365 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn); 4366 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 4367 qib_write_kreg(dd, kr_scratch, 0); 4368 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 4369 } 4370 } 4371 4372 static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t) 4373 { 4374 switch (which) { 4375 case QIB_IB_TBL_VL_HIGH_ARB: 4376 get_vl_weights(ppd, krp_highprio_0, t); 4377 break; 4378 4379 case QIB_IB_TBL_VL_LOW_ARB: 4380 get_vl_weights(ppd, krp_lowprio_0, t); 4381 break; 4382 4383 default: 4384 return -EINVAL; 4385 } 4386 return 0; 4387 } 4388 4389 static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t) 4390 { 4391 switch (which) { 4392 case QIB_IB_TBL_VL_HIGH_ARB: 4393 set_vl_weights(ppd, krp_highprio_0, t); 4394 break; 4395 4396 case QIB_IB_TBL_VL_LOW_ARB: 4397 set_vl_weights(ppd, krp_lowprio_0, t); 4398 break; 4399 4400 default: 4401 return -EINVAL; 4402 } 4403 return 0; 4404 } 4405 4406 static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd, 4407 u32 updegr, u32 egrhd, u32 npkts) 4408 { 4409 /* 4410 * Need to write timeout register before updating rcvhdrhead to ensure 4411 * that the timer is enabled on reception of a packet. 4412 */ 4413 if (hd >> IBA7322_HDRHEAD_PKTINT_SHIFT) 4414 adjust_rcv_timeout(rcd, npkts); 4415 if (updegr) 4416 qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); 4417 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); 4418 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); 4419 } 4420 4421 static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd) 4422 { 4423 u32 head, tail; 4424 4425 head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); 4426 if (rcd->rcvhdrtail_kvaddr) 4427 tail = qib_get_rcvhdrtail(rcd); 4428 else 4429 tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); 4430 return head == tail; 4431 } 4432 4433 #define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \ 4434 QIB_RCVCTRL_CTXT_DIS | \ 4435 QIB_RCVCTRL_TIDFLOW_ENB | \ 4436 QIB_RCVCTRL_TIDFLOW_DIS | \ 4437 QIB_RCVCTRL_TAILUPD_ENB | \ 4438 QIB_RCVCTRL_TAILUPD_DIS | \ 4439 QIB_RCVCTRL_INTRAVAIL_ENB | \ 4440 QIB_RCVCTRL_INTRAVAIL_DIS | \ 4441 QIB_RCVCTRL_BP_ENB | \ 4442 QIB_RCVCTRL_BP_DIS) 4443 4444 #define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \ 4445 QIB_RCVCTRL_CTXT_DIS | \ 4446 QIB_RCVCTRL_PKEY_DIS | \ 4447 QIB_RCVCTRL_PKEY_ENB) 4448 4449 /* 4450 * Modify the RCVCTRL register in chip-specific way. This 4451 * is a function because bit positions and (future) register 4452 * location is chip-specifc, but the needed operations are 4453 * generic. <op> is a bit-mask because we often want to 4454 * do multiple modifications. 4455 */ 4456 static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, 4457 int ctxt) 4458 { 4459 struct qib_devdata *dd = ppd->dd; 4460 struct qib_ctxtdata *rcd; 4461 u64 mask, val; 4462 unsigned long flags; 4463 4464 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 4465 4466 if (op & QIB_RCVCTRL_TIDFLOW_ENB) 4467 dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable); 4468 if (op & QIB_RCVCTRL_TIDFLOW_DIS) 4469 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable); 4470 if (op & QIB_RCVCTRL_TAILUPD_ENB) 4471 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); 4472 if (op & QIB_RCVCTRL_TAILUPD_DIS) 4473 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd); 4474 if (op & QIB_RCVCTRL_PKEY_ENB) 4475 ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); 4476 if (op & QIB_RCVCTRL_PKEY_DIS) 4477 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); 4478 if (ctxt < 0) { 4479 mask = (1ULL << dd->ctxtcnt) - 1; 4480 rcd = NULL; 4481 } else { 4482 mask = (1ULL << ctxt); 4483 rcd = dd->rcd[ctxt]; 4484 } 4485 if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) { 4486 ppd->p_rcvctrl |= 4487 (mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); 4488 if (!(dd->flags & QIB_NODMA_RTAIL)) { 4489 op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */ 4490 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); 4491 } 4492 /* Write these registers before the context is enabled. */ 4493 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 4494 rcd->rcvhdrqtailaddr_phys); 4495 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 4496 rcd->rcvhdrq_phys); 4497 rcd->seq_cnt = 1; 4498 } 4499 if (op & QIB_RCVCTRL_CTXT_DIS) 4500 ppd->p_rcvctrl &= 4501 ~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); 4502 if (op & QIB_RCVCTRL_BP_ENB) 4503 dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull); 4504 if (op & QIB_RCVCTRL_BP_DIS) 4505 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull)); 4506 if (op & QIB_RCVCTRL_INTRAVAIL_ENB) 4507 dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail)); 4508 if (op & QIB_RCVCTRL_INTRAVAIL_DIS) 4509 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail)); 4510 /* 4511 * Decide which registers to write depending on the ops enabled. 4512 * Special case is "flush" (no bits set at all) 4513 * which needs to write both. 4514 */ 4515 if (op == 0 || (op & RCVCTRL_COMMON_MODS)) 4516 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); 4517 if (op == 0 || (op & RCVCTRL_PORT_MODS)) 4518 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); 4519 if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) { 4520 /* 4521 * Init the context registers also; if we were 4522 * disabled, tail and head should both be zero 4523 * already from the enable, but since we don't 4524 * know, we have to do it explicitly. 4525 */ 4526 val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); 4527 qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); 4528 4529 /* be sure enabling write seen; hd/tl should be 0 */ 4530 (void) qib_read_kreg32(dd, kr_scratch); 4531 val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); 4532 dd->rcd[ctxt]->head = val; 4533 /* If kctxt, interrupt on next receive. */ 4534 if (ctxt < dd->first_user_ctxt) 4535 val |= dd->rhdrhead_intr_off; 4536 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); 4537 } else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && 4538 dd->rcd[ctxt] && dd->rhdrhead_intr_off) { 4539 /* arm rcv interrupt */ 4540 val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off; 4541 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); 4542 } 4543 if (op & QIB_RCVCTRL_CTXT_DIS) { 4544 unsigned f; 4545 4546 /* Now that the context is disabled, clear these registers. */ 4547 if (ctxt >= 0) { 4548 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0); 4549 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0); 4550 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) 4551 qib_write_ureg(dd, ur_rcvflowtable + f, 4552 TIDFLOW_ERRBITS, ctxt); 4553 } else { 4554 unsigned i; 4555 4556 for (i = 0; i < dd->cfgctxts; i++) { 4557 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, 4558 i, 0); 4559 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0); 4560 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) 4561 qib_write_ureg(dd, ur_rcvflowtable + f, 4562 TIDFLOW_ERRBITS, i); 4563 } 4564 } 4565 } 4566 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 4567 } 4568 4569 /* 4570 * Modify the SENDCTRL register in chip-specific way. This 4571 * is a function where there are multiple such registers with 4572 * slightly different layouts. 4573 * The chip doesn't allow back-to-back sendctrl writes, so write 4574 * the scratch register after writing sendctrl. 4575 * 4576 * Which register is written depends on the operation. 4577 * Most operate on the common register, while 4578 * SEND_ENB and SEND_DIS operate on the per-port ones. 4579 * SEND_ENB is included in common because it can change SPCL_TRIG 4580 */ 4581 #define SENDCTRL_COMMON_MODS (\ 4582 QIB_SENDCTRL_CLEAR | \ 4583 QIB_SENDCTRL_AVAIL_DIS | \ 4584 QIB_SENDCTRL_AVAIL_ENB | \ 4585 QIB_SENDCTRL_AVAIL_BLIP | \ 4586 QIB_SENDCTRL_DISARM | \ 4587 QIB_SENDCTRL_DISARM_ALL | \ 4588 QIB_SENDCTRL_SEND_ENB) 4589 4590 #define SENDCTRL_PORT_MODS (\ 4591 QIB_SENDCTRL_CLEAR | \ 4592 QIB_SENDCTRL_SEND_ENB | \ 4593 QIB_SENDCTRL_SEND_DIS | \ 4594 QIB_SENDCTRL_FLUSH) 4595 4596 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op) 4597 { 4598 struct qib_devdata *dd = ppd->dd; 4599 u64 tmp_dd_sendctrl; 4600 unsigned long flags; 4601 4602 spin_lock_irqsave(&dd->sendctrl_lock, flags); 4603 4604 /* First the dd ones that are "sticky", saved in shadow */ 4605 if (op & QIB_SENDCTRL_CLEAR) 4606 dd->sendctrl = 0; 4607 if (op & QIB_SENDCTRL_AVAIL_DIS) 4608 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4609 else if (op & QIB_SENDCTRL_AVAIL_ENB) { 4610 dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd); 4611 if (dd->flags & QIB_USE_SPCL_TRIG) 4612 dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn); 4613 } 4614 4615 /* Then the ppd ones that are "sticky", saved in shadow */ 4616 if (op & QIB_SENDCTRL_SEND_DIS) 4617 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); 4618 else if (op & QIB_SENDCTRL_SEND_ENB) 4619 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); 4620 4621 if (op & QIB_SENDCTRL_DISARM_ALL) { 4622 u32 i, last; 4623 4624 tmp_dd_sendctrl = dd->sendctrl; 4625 last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 4626 /* 4627 * Disarm any buffers that are not yet launched, 4628 * disabling updates until done. 4629 */ 4630 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4631 for (i = 0; i < last; i++) { 4632 qib_write_kreg(dd, kr_sendctrl, 4633 tmp_dd_sendctrl | 4634 SYM_MASK(SendCtrl, Disarm) | i); 4635 qib_write_kreg(dd, kr_scratch, 0); 4636 } 4637 } 4638 4639 if (op & QIB_SENDCTRL_FLUSH) { 4640 u64 tmp_ppd_sendctrl = ppd->p_sendctrl; 4641 4642 /* 4643 * Now drain all the fifos. The Abort bit should never be 4644 * needed, so for now, at least, we don't use it. 4645 */ 4646 tmp_ppd_sendctrl |= 4647 SYM_MASK(SendCtrl_0, TxeDrainRmFifo) | 4648 SYM_MASK(SendCtrl_0, TxeDrainLaFifo) | 4649 SYM_MASK(SendCtrl_0, TxeBypassIbc); 4650 qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl); 4651 qib_write_kreg(dd, kr_scratch, 0); 4652 } 4653 4654 tmp_dd_sendctrl = dd->sendctrl; 4655 4656 if (op & QIB_SENDCTRL_DISARM) 4657 tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | 4658 ((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) << 4659 SYM_LSB(SendCtrl, DisarmSendBuf)); 4660 if ((op & QIB_SENDCTRL_AVAIL_BLIP) && 4661 (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd))) 4662 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4663 4664 if (op == 0 || (op & SENDCTRL_COMMON_MODS)) { 4665 qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); 4666 qib_write_kreg(dd, kr_scratch, 0); 4667 } 4668 4669 if (op == 0 || (op & SENDCTRL_PORT_MODS)) { 4670 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 4671 qib_write_kreg(dd, kr_scratch, 0); 4672 } 4673 4674 if (op & QIB_SENDCTRL_AVAIL_BLIP) { 4675 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); 4676 qib_write_kreg(dd, kr_scratch, 0); 4677 } 4678 4679 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 4680 4681 if (op & QIB_SENDCTRL_FLUSH) { 4682 u32 v; 4683 /* 4684 * ensure writes have hit chip, then do a few 4685 * more reads, to allow DMA of pioavail registers 4686 * to occur, so in-memory copy is in sync with 4687 * the chip. Not always safe to sleep. 4688 */ 4689 v = qib_read_kreg32(dd, kr_scratch); 4690 qib_write_kreg(dd, kr_scratch, v); 4691 v = qib_read_kreg32(dd, kr_scratch); 4692 qib_write_kreg(dd, kr_scratch, v); 4693 qib_read_kreg32(dd, kr_scratch); 4694 } 4695 } 4696 4697 #define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */ 4698 #define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */ 4699 #define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */ 4700 4701 /** 4702 * qib_portcntr_7322 - read a per-port chip counter 4703 * @ppd: the qlogic_ib pport 4704 * @reg: the counter to read (not a chip offset) 4705 */ 4706 static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg) 4707 { 4708 struct qib_devdata *dd = ppd->dd; 4709 u64 ret = 0ULL; 4710 u16 creg; 4711 /* 0xffff for unimplemented or synthesized counters */ 4712 static const u32 xlator[] = { 4713 [QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG, 4714 [QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG, 4715 [QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount, 4716 [QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount, 4717 [QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount, 4718 [QIBPORTCNTR_SENDSTALL] = crp_sendstall, 4719 [QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG, 4720 [QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount, 4721 [QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount, 4722 [QIBPORTCNTR_RCVEBP] = crp_rcvebp, 4723 [QIBPORTCNTR_RCVOVFL] = crp_rcvovfl, 4724 [QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG, 4725 [QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed for 7322 */ 4726 [QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr, 4727 [QIBPORTCNTR_RXVLERR] = crp_rxvlerr, 4728 [QIBPORTCNTR_ERRICRC] = crp_erricrc, 4729 [QIBPORTCNTR_ERRVCRC] = crp_errvcrc, 4730 [QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc, 4731 [QIBPORTCNTR_BADFORMAT] = crp_badformat, 4732 [QIBPORTCNTR_ERR_RLEN] = crp_err_rlen, 4733 [QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr, 4734 [QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen, 4735 [QIBPORTCNTR_UNSUPVL] = crp_txunsupvl, 4736 [QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl, 4737 [QIBPORTCNTR_ERRLINK] = crp_errlink, 4738 [QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown, 4739 [QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov, 4740 [QIBPORTCNTR_LLI] = crp_locallinkintegrityerr, 4741 [QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt, 4742 [QIBPORTCNTR_ERRPKEY] = crp_errpkey, 4743 /* 4744 * the next 3 aren't really counters, but were implemented 4745 * as counters in older chips, so still get accessed as 4746 * though they were counters from this code. 4747 */ 4748 [QIBPORTCNTR_PSINTERVAL] = krp_psinterval, 4749 [QIBPORTCNTR_PSSTART] = krp_psstart, 4750 [QIBPORTCNTR_PSSTAT] = krp_psstat, 4751 /* pseudo-counter, summed for all ports */ 4752 [QIBPORTCNTR_KHDROVFL] = 0xffff, 4753 }; 4754 4755 if (reg >= ARRAY_SIZE(xlator)) { 4756 qib_devinfo(ppd->dd->pcidev, 4757 "Unimplemented portcounter %u\n", reg); 4758 goto done; 4759 } 4760 creg = xlator[reg] & _PORT_CNTR_IDXMASK; 4761 4762 /* handle non-counters and special cases first */ 4763 if (reg == QIBPORTCNTR_KHDROVFL) { 4764 int i; 4765 4766 /* sum over all kernel contexts (skip if mini_init) */ 4767 for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) { 4768 struct qib_ctxtdata *rcd = dd->rcd[i]; 4769 4770 if (!rcd || rcd->ppd != ppd) 4771 continue; 4772 ret += read_7322_creg32(dd, cr_base_egrovfl + i); 4773 } 4774 goto done; 4775 } else if (reg == QIBPORTCNTR_RXDROPPKT) { 4776 /* 4777 * Used as part of the synthesis of port_rcv_errors 4778 * in the verbs code for IBTA counters. Not needed for 7322, 4779 * because all the errors are already counted by other cntrs. 4780 */ 4781 goto done; 4782 } else if (reg == QIBPORTCNTR_PSINTERVAL || 4783 reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) { 4784 /* were counters in older chips, now per-port kernel regs */ 4785 ret = qib_read_kreg_port(ppd, creg); 4786 goto done; 4787 } 4788 4789 /* 4790 * Only fast increment counters are 64 bits; use 32 bit reads to 4791 * avoid two independent reads when on Opteron. 4792 */ 4793 if (xlator[reg] & _PORT_64BIT_FLAG) 4794 ret = read_7322_creg_port(ppd, creg); 4795 else 4796 ret = read_7322_creg32_port(ppd, creg); 4797 if (creg == crp_ibsymbolerr) { 4798 if (ppd->cpspec->ibdeltainprog) 4799 ret -= ret - ppd->cpspec->ibsymsnap; 4800 ret -= ppd->cpspec->ibsymdelta; 4801 } else if (creg == crp_iblinkerrrecov) { 4802 if (ppd->cpspec->ibdeltainprog) 4803 ret -= ret - ppd->cpspec->iblnkerrsnap; 4804 ret -= ppd->cpspec->iblnkerrdelta; 4805 } else if (creg == crp_errlink) 4806 ret -= ppd->cpspec->ibmalfdelta; 4807 else if (creg == crp_iblinkdown) 4808 ret += ppd->cpspec->iblnkdowndelta; 4809 done: 4810 return ret; 4811 } 4812 4813 /* 4814 * Device counter names (not port-specific), one line per stat, 4815 * single string. Used by utilities like ipathstats to print the stats 4816 * in a way which works for different versions of drivers, without changing 4817 * the utility. Names need to be 12 chars or less (w/o newline), for proper 4818 * display by utility. 4819 * Non-error counters are first. 4820 * Start of "error" conters is indicated by a leading "E " on the first 4821 * "error" counter, and doesn't count in label length. 4822 * The EgrOvfl list needs to be last so we truncate them at the configured 4823 * context count for the device. 4824 * cntr7322indices contains the corresponding register indices. 4825 */ 4826 static const char cntr7322names[] = 4827 "Interrupts\n" 4828 "HostBusStall\n" 4829 "E RxTIDFull\n" 4830 "RxTIDInvalid\n" 4831 "RxTIDFloDrop\n" /* 7322 only */ 4832 "Ctxt0EgrOvfl\n" 4833 "Ctxt1EgrOvfl\n" 4834 "Ctxt2EgrOvfl\n" 4835 "Ctxt3EgrOvfl\n" 4836 "Ctxt4EgrOvfl\n" 4837 "Ctxt5EgrOvfl\n" 4838 "Ctxt6EgrOvfl\n" 4839 "Ctxt7EgrOvfl\n" 4840 "Ctxt8EgrOvfl\n" 4841 "Ctxt9EgrOvfl\n" 4842 "Ctx10EgrOvfl\n" 4843 "Ctx11EgrOvfl\n" 4844 "Ctx12EgrOvfl\n" 4845 "Ctx13EgrOvfl\n" 4846 "Ctx14EgrOvfl\n" 4847 "Ctx15EgrOvfl\n" 4848 "Ctx16EgrOvfl\n" 4849 "Ctx17EgrOvfl\n" 4850 ; 4851 4852 static const u32 cntr7322indices[] = { 4853 cr_lbint | _PORT_64BIT_FLAG, 4854 cr_lbstall | _PORT_64BIT_FLAG, 4855 cr_tidfull, 4856 cr_tidinvalid, 4857 cr_rxtidflowdrop, 4858 cr_base_egrovfl + 0, 4859 cr_base_egrovfl + 1, 4860 cr_base_egrovfl + 2, 4861 cr_base_egrovfl + 3, 4862 cr_base_egrovfl + 4, 4863 cr_base_egrovfl + 5, 4864 cr_base_egrovfl + 6, 4865 cr_base_egrovfl + 7, 4866 cr_base_egrovfl + 8, 4867 cr_base_egrovfl + 9, 4868 cr_base_egrovfl + 10, 4869 cr_base_egrovfl + 11, 4870 cr_base_egrovfl + 12, 4871 cr_base_egrovfl + 13, 4872 cr_base_egrovfl + 14, 4873 cr_base_egrovfl + 15, 4874 cr_base_egrovfl + 16, 4875 cr_base_egrovfl + 17, 4876 }; 4877 4878 /* 4879 * same as cntr7322names and cntr7322indices, but for port-specific counters. 4880 * portcntr7322indices is somewhat complicated by some registers needing 4881 * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG 4882 */ 4883 static const char portcntr7322names[] = 4884 "TxPkt\n" 4885 "TxFlowPkt\n" 4886 "TxWords\n" 4887 "RxPkt\n" 4888 "RxFlowPkt\n" 4889 "RxWords\n" 4890 "TxFlowStall\n" 4891 "TxDmaDesc\n" /* 7220 and 7322-only */ 4892 "E RxDlidFltr\n" /* 7220 and 7322-only */ 4893 "IBStatusChng\n" 4894 "IBLinkDown\n" 4895 "IBLnkRecov\n" 4896 "IBRxLinkErr\n" 4897 "IBSymbolErr\n" 4898 "RxLLIErr\n" 4899 "RxBadFormat\n" 4900 "RxBadLen\n" 4901 "RxBufOvrfl\n" 4902 "RxEBP\n" 4903 "RxFlowCtlErr\n" 4904 "RxICRCerr\n" 4905 "RxLPCRCerr\n" 4906 "RxVCRCerr\n" 4907 "RxInvalLen\n" 4908 "RxInvalPKey\n" 4909 "RxPktDropped\n" 4910 "TxBadLength\n" 4911 "TxDropped\n" 4912 "TxInvalLen\n" 4913 "TxUnderrun\n" 4914 "TxUnsupVL\n" 4915 "RxLclPhyErr\n" /* 7220 and 7322-only from here down */ 4916 "RxVL15Drop\n" 4917 "RxVlErr\n" 4918 "XcessBufOvfl\n" 4919 "RxQPBadCtxt\n" /* 7322-only from here down */ 4920 "TXBadHeader\n" 4921 ; 4922 4923 static const u32 portcntr7322indices[] = { 4924 QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, 4925 crp_pktsendflow, 4926 QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, 4927 QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, 4928 crp_pktrcvflowctrl, 4929 QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, 4930 QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, 4931 crp_txsdmadesc | _PORT_64BIT_FLAG, 4932 crp_rxdlidfltr, 4933 crp_ibstatuschange, 4934 QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, 4935 QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, 4936 QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, 4937 QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, 4938 QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, 4939 QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, 4940 QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, 4941 QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, 4942 QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, 4943 crp_rcvflowctrlviol, 4944 QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, 4945 QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, 4946 QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, 4947 QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, 4948 QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, 4949 QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, 4950 crp_txminmaxlenerr, 4951 crp_txdroppedpkt, 4952 crp_txlenerr, 4953 crp_txunderrun, 4954 crp_txunsupvl, 4955 QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG, 4956 QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG, 4957 QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG, 4958 QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG, 4959 crp_rxqpinvalidctxt, 4960 crp_txhdrerr, 4961 }; 4962 4963 /* do all the setup to make the counter reads efficient later */ 4964 static void init_7322_cntrnames(struct qib_devdata *dd) 4965 { 4966 int i, j = 0; 4967 char *s; 4968 4969 for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts; 4970 i++) { 4971 /* we always have at least one counter before the egrovfl */ 4972 if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) 4973 j = 1; 4974 s = strchr(s + 1, '\n'); 4975 if (s && j) 4976 j++; 4977 } 4978 dd->cspec->ncntrs = i; 4979 if (!s) 4980 /* full list; size is without terminating null */ 4981 dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1; 4982 else 4983 dd->cspec->cntrnamelen = 1 + s - cntr7322names; 4984 dd->cspec->cntrs = kmalloc_array(dd->cspec->ncntrs, sizeof(u64), 4985 GFP_KERNEL); 4986 4987 for (i = 0, s = (char *)portcntr7322names; s; i++) 4988 s = strchr(s + 1, '\n'); 4989 dd->cspec->nportcntrs = i - 1; 4990 dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1; 4991 for (i = 0; i < dd->num_pports; ++i) { 4992 dd->pport[i].cpspec->portcntrs = 4993 kmalloc_array(dd->cspec->nportcntrs, sizeof(u64), 4994 GFP_KERNEL); 4995 } 4996 } 4997 4998 static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep, 4999 u64 **cntrp) 5000 { 5001 u32 ret; 5002 5003 if (namep) { 5004 ret = dd->cspec->cntrnamelen; 5005 if (pos >= ret) 5006 ret = 0; /* final read after getting everything */ 5007 else 5008 *namep = (char *) cntr7322names; 5009 } else { 5010 u64 *cntr = dd->cspec->cntrs; 5011 int i; 5012 5013 ret = dd->cspec->ncntrs * sizeof(u64); 5014 if (!cntr || pos >= ret) { 5015 /* everything read, or couldn't get memory */ 5016 ret = 0; 5017 goto done; 5018 } 5019 *cntrp = cntr; 5020 for (i = 0; i < dd->cspec->ncntrs; i++) 5021 if (cntr7322indices[i] & _PORT_64BIT_FLAG) 5022 *cntr++ = read_7322_creg(dd, 5023 cntr7322indices[i] & 5024 _PORT_CNTR_IDXMASK); 5025 else 5026 *cntr++ = read_7322_creg32(dd, 5027 cntr7322indices[i]); 5028 } 5029 done: 5030 return ret; 5031 } 5032 5033 static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, 5034 char **namep, u64 **cntrp) 5035 { 5036 u32 ret; 5037 5038 if (namep) { 5039 ret = dd->cspec->portcntrnamelen; 5040 if (pos >= ret) 5041 ret = 0; /* final read after getting everything */ 5042 else 5043 *namep = (char *)portcntr7322names; 5044 } else { 5045 struct qib_pportdata *ppd = &dd->pport[port]; 5046 u64 *cntr = ppd->cpspec->portcntrs; 5047 int i; 5048 5049 ret = dd->cspec->nportcntrs * sizeof(u64); 5050 if (!cntr || pos >= ret) { 5051 /* everything read, or couldn't get memory */ 5052 ret = 0; 5053 goto done; 5054 } 5055 *cntrp = cntr; 5056 for (i = 0; i < dd->cspec->nportcntrs; i++) { 5057 if (portcntr7322indices[i] & _PORT_VIRT_FLAG) 5058 *cntr++ = qib_portcntr_7322(ppd, 5059 portcntr7322indices[i] & 5060 _PORT_CNTR_IDXMASK); 5061 else if (portcntr7322indices[i] & _PORT_64BIT_FLAG) 5062 *cntr++ = read_7322_creg_port(ppd, 5063 portcntr7322indices[i] & 5064 _PORT_CNTR_IDXMASK); 5065 else 5066 *cntr++ = read_7322_creg32_port(ppd, 5067 portcntr7322indices[i]); 5068 } 5069 } 5070 done: 5071 return ret; 5072 } 5073 5074 /** 5075 * qib_get_7322_faststats - get word counters from chip before they overflow 5076 * @t: contains a pointer to the qlogic_ib device qib_devdata 5077 * 5078 * VESTIGIAL IBA7322 has no "small fast counters", so the only 5079 * real purpose of this function is to maintain the notion of 5080 * "active time", which in turn is only logged into the eeprom, 5081 * which we don;t have, yet, for 7322-based boards. 5082 * 5083 * called from add_timer 5084 */ 5085 static void qib_get_7322_faststats(struct timer_list *t) 5086 { 5087 struct qib_devdata *dd = from_timer(dd, t, stats_timer); 5088 struct qib_pportdata *ppd; 5089 unsigned long flags; 5090 u64 traffic_wds; 5091 int pidx; 5092 5093 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 5094 ppd = dd->pport + pidx; 5095 5096 /* 5097 * If port isn't enabled or not operational ports, or 5098 * diags is running (can cause memory diags to fail) 5099 * skip this port this time. 5100 */ 5101 if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED) 5102 || dd->diag_client) 5103 continue; 5104 5105 /* 5106 * Maintain an activity timer, based on traffic 5107 * exceeding a threshold, so we need to check the word-counts 5108 * even if they are 64-bit. 5109 */ 5110 traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) + 5111 qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND); 5112 spin_lock_irqsave(&ppd->dd->eep_st_lock, flags); 5113 traffic_wds -= ppd->dd->traffic_wds; 5114 ppd->dd->traffic_wds += traffic_wds; 5115 spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags); 5116 if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active & 5117 QIB_IB_QDR) && 5118 (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | 5119 QIBL_LINKACTIVE)) && 5120 ppd->cpspec->qdr_dfe_time && 5121 time_is_before_jiffies(ppd->cpspec->qdr_dfe_time)) { 5122 ppd->cpspec->qdr_dfe_on = 0; 5123 5124 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 5125 ppd->dd->cspec->r1 ? 5126 QDR_STATIC_ADAPT_INIT_R1 : 5127 QDR_STATIC_ADAPT_INIT); 5128 force_h1(ppd); 5129 } 5130 } 5131 mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); 5132 } 5133 5134 /* 5135 * If we were using MSIx, try to fallback to INTx. 5136 */ 5137 static int qib_7322_intr_fallback(struct qib_devdata *dd) 5138 { 5139 if (!dd->cspec->num_msix_entries) 5140 return 0; /* already using INTx */ 5141 5142 qib_devinfo(dd->pcidev, 5143 "MSIx interrupt not detected, trying INTx interrupts\n"); 5144 qib_7322_free_irq(dd); 5145 if (pci_alloc_irq_vectors(dd->pcidev, 1, 1, PCI_IRQ_INTX) < 0) 5146 qib_dev_err(dd, "Failed to enable INTx\n"); 5147 qib_setup_7322_interrupt(dd, 0); 5148 return 1; 5149 } 5150 5151 /* 5152 * Reset the XGXS (between serdes and IBC). Slightly less intrusive 5153 * than resetting the IBC or external link state, and useful in some 5154 * cases to cause some retraining. To do this right, we reset IBC 5155 * as well, then return to previous state (which may be still in reset) 5156 * NOTE: some callers of this "know" this writes the current value 5157 * of cpspec->ibcctrl_a as part of it's operation, so if that changes, 5158 * check all callers. 5159 */ 5160 static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd) 5161 { 5162 u64 val; 5163 struct qib_devdata *dd = ppd->dd; 5164 const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) | 5165 SYM_MASK(IBPCSConfig_0, xcv_treset) | 5166 SYM_MASK(IBPCSConfig_0, tx_rx_reset); 5167 5168 val = qib_read_kreg_port(ppd, krp_ib_pcsconfig); 5169 qib_write_kreg(dd, kr_hwerrmask, 5170 dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop)); 5171 qib_write_kreg_port(ppd, krp_ibcctrl_a, 5172 ppd->cpspec->ibcctrl_a & 5173 ~SYM_MASK(IBCCtrlA_0, IBLinkEn)); 5174 5175 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits); 5176 qib_read_kreg32(dd, kr_scratch); 5177 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits); 5178 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 5179 qib_write_kreg(dd, kr_scratch, 0ULL); 5180 qib_write_kreg(dd, kr_hwerrclear, 5181 SYM_MASK(HwErrClear, statusValidNoEopClear)); 5182 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 5183 } 5184 5185 /* 5186 * This code for non-IBTA-compliant IB speed negotiation is only known to 5187 * work for the SDR to DDR transition, and only between an HCA and a switch 5188 * with recent firmware. It is based on observed heuristics, rather than 5189 * actual knowledge of the non-compliant speed negotiation. 5190 * It has a number of hard-coded fields, since the hope is to rewrite this 5191 * when a spec is available on how the negoation is intended to work. 5192 */ 5193 static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr, 5194 u32 dcnt, u32 *data) 5195 { 5196 int i; 5197 u64 pbc; 5198 u32 __iomem *piobuf; 5199 u32 pnum, control, len; 5200 struct qib_devdata *dd = ppd->dd; 5201 5202 i = 0; 5203 len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */ 5204 control = qib_7322_setpbc_control(ppd, len, 0, 15); 5205 pbc = ((u64) control << 32) | len; 5206 while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) { 5207 if (i++ > 15) 5208 return; 5209 udelay(2); 5210 } 5211 /* disable header check on this packet, since it can't be valid */ 5212 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL); 5213 writeq(pbc, piobuf); 5214 qib_flush_wc(); 5215 qib_pio_copy(piobuf + 2, hdr, 7); 5216 qib_pio_copy(piobuf + 9, data, dcnt); 5217 if (dd->flags & QIB_USE_SPCL_TRIG) { 5218 u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023; 5219 5220 qib_flush_wc(); 5221 __raw_writel(0xaebecede, piobuf + spcl_off); 5222 } 5223 qib_flush_wc(); 5224 qib_sendbuf_done(dd, pnum); 5225 /* and re-enable hdr check */ 5226 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL); 5227 } 5228 5229 /* 5230 * _start packet gets sent twice at start, _done gets sent twice at end 5231 */ 5232 static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which) 5233 { 5234 struct qib_devdata *dd = ppd->dd; 5235 static u32 swapped; 5236 u32 dw, i, hcnt, dcnt, *data; 5237 static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba }; 5238 static u32 madpayload_start[0x40] = { 5239 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 5240 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 5241 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */ 5242 }; 5243 static u32 madpayload_done[0x40] = { 5244 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 5245 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 5246 0x40000001, 0x1388, 0x15e, /* rest 0's */ 5247 }; 5248 5249 dcnt = ARRAY_SIZE(madpayload_start); 5250 hcnt = ARRAY_SIZE(hdr); 5251 if (!swapped) { 5252 /* for maintainability, do it at runtime */ 5253 for (i = 0; i < hcnt; i++) { 5254 dw = (__force u32) cpu_to_be32(hdr[i]); 5255 hdr[i] = dw; 5256 } 5257 for (i = 0; i < dcnt; i++) { 5258 dw = (__force u32) cpu_to_be32(madpayload_start[i]); 5259 madpayload_start[i] = dw; 5260 dw = (__force u32) cpu_to_be32(madpayload_done[i]); 5261 madpayload_done[i] = dw; 5262 } 5263 swapped = 1; 5264 } 5265 5266 data = which ? madpayload_done : madpayload_start; 5267 5268 autoneg_7322_sendpkt(ppd, hdr, dcnt, data); 5269 qib_read_kreg64(dd, kr_scratch); 5270 udelay(2); 5271 autoneg_7322_sendpkt(ppd, hdr, dcnt, data); 5272 qib_read_kreg64(dd, kr_scratch); 5273 udelay(2); 5274 } 5275 5276 /* 5277 * Do the absolute minimum to cause an IB speed change, and make it 5278 * ready, but don't actually trigger the change. The caller will 5279 * do that when ready (if link is in Polling training state, it will 5280 * happen immediately, otherwise when link next goes down) 5281 * 5282 * This routine should only be used as part of the DDR autonegotation 5283 * code for devices that are not compliant with IB 1.2 (or code that 5284 * fixes things up for same). 5285 * 5286 * When link has gone down, and autoneg enabled, or autoneg has 5287 * failed and we give up until next time we set both speeds, and 5288 * then we want IBTA enabled as well as "use max enabled speed. 5289 */ 5290 static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed) 5291 { 5292 u64 newctrlb; 5293 5294 newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK | 5295 IBA7322_IBC_IBTA_1_2_MASK | 5296 IBA7322_IBC_MAX_SPEED_MASK); 5297 5298 if (speed & (speed - 1)) /* multiple speeds */ 5299 newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) | 5300 IBA7322_IBC_IBTA_1_2_MASK | 5301 IBA7322_IBC_MAX_SPEED_MASK; 5302 else 5303 newctrlb |= speed == QIB_IB_QDR ? 5304 IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK : 5305 ((speed == QIB_IB_DDR ? 5306 IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR)); 5307 5308 if (newctrlb == ppd->cpspec->ibcctrl_b) 5309 return; 5310 5311 ppd->cpspec->ibcctrl_b = newctrlb; 5312 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 5313 qib_write_kreg(ppd->dd, kr_scratch, 0); 5314 } 5315 5316 /* 5317 * This routine is only used when we are not talking to another 5318 * IB 1.2-compliant device that we think can do DDR. 5319 * (This includes all existing switch chips as of Oct 2007.) 5320 * 1.2-compliant devices go directly to DDR prior to reaching INIT 5321 */ 5322 static void try_7322_autoneg(struct qib_pportdata *ppd) 5323 { 5324 unsigned long flags; 5325 5326 spin_lock_irqsave(&ppd->lflags_lock, flags); 5327 ppd->lflags |= QIBL_IB_AUTONEG_INPROG; 5328 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5329 qib_autoneg_7322_send(ppd, 0); 5330 set_7322_ibspeed_fast(ppd, QIB_IB_DDR); 5331 qib_7322_mini_pcs_reset(ppd); 5332 /* 2 msec is minimum length of a poll cycle */ 5333 queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work, 5334 msecs_to_jiffies(2)); 5335 } 5336 5337 /* 5338 * Handle the empirically determined mechanism for auto-negotiation 5339 * of DDR speed with switches. 5340 */ 5341 static void autoneg_7322_work(struct work_struct *work) 5342 { 5343 struct qib_pportdata *ppd; 5344 u32 i; 5345 unsigned long flags; 5346 5347 ppd = container_of(work, struct qib_chippport_specific, 5348 autoneg_work.work)->ppd; 5349 5350 /* 5351 * Busy wait for this first part, it should be at most a 5352 * few hundred usec, since we scheduled ourselves for 2msec. 5353 */ 5354 for (i = 0; i < 25; i++) { 5355 if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState) 5356 == IB_7322_LT_STATE_POLLQUIET) { 5357 qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE); 5358 break; 5359 } 5360 udelay(100); 5361 } 5362 5363 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) 5364 goto done; /* we got there early or told to stop */ 5365 5366 /* we expect this to timeout */ 5367 if (wait_event_timeout(ppd->cpspec->autoneg_wait, 5368 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5369 msecs_to_jiffies(90))) 5370 goto done; 5371 qib_7322_mini_pcs_reset(ppd); 5372 5373 /* we expect this to timeout */ 5374 if (wait_event_timeout(ppd->cpspec->autoneg_wait, 5375 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5376 msecs_to_jiffies(1700))) 5377 goto done; 5378 qib_7322_mini_pcs_reset(ppd); 5379 5380 set_7322_ibspeed_fast(ppd, QIB_IB_SDR); 5381 5382 /* 5383 * Wait up to 250 msec for link to train and get to INIT at DDR; 5384 * this should terminate early. 5385 */ 5386 wait_event_timeout(ppd->cpspec->autoneg_wait, 5387 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5388 msecs_to_jiffies(250)); 5389 done: 5390 if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) { 5391 spin_lock_irqsave(&ppd->lflags_lock, flags); 5392 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; 5393 if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) { 5394 ppd->lflags |= QIBL_IB_AUTONEG_FAILED; 5395 ppd->cpspec->autoneg_tries = 0; 5396 } 5397 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5398 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5399 } 5400 } 5401 5402 /* 5403 * This routine is used to request IPG set in the QLogic switch. 5404 * Only called if r1. 5405 */ 5406 static void try_7322_ipg(struct qib_pportdata *ppd) 5407 { 5408 struct qib_ibport *ibp = &ppd->ibport_data; 5409 struct ib_mad_send_buf *send_buf; 5410 struct ib_mad_agent *agent; 5411 struct ib_smp *smp; 5412 unsigned delay; 5413 int ret; 5414 5415 agent = ibp->rvp.send_agent; 5416 if (!agent) 5417 goto retry; 5418 5419 send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR, 5420 IB_MGMT_MAD_DATA, GFP_ATOMIC, 5421 IB_MGMT_BASE_VERSION); 5422 if (IS_ERR(send_buf)) 5423 goto retry; 5424 5425 if (!ibp->smi_ah) { 5426 struct ib_ah *ah; 5427 5428 ah = qib_create_qp0_ah(ibp, be16_to_cpu(IB_LID_PERMISSIVE)); 5429 if (IS_ERR(ah)) 5430 ret = PTR_ERR(ah); 5431 else { 5432 send_buf->ah = ah; 5433 ibp->smi_ah = ibah_to_rvtah(ah); 5434 ret = 0; 5435 } 5436 } else { 5437 send_buf->ah = &ibp->smi_ah->ibah; 5438 ret = 0; 5439 } 5440 5441 smp = send_buf->mad; 5442 smp->base_version = IB_MGMT_BASE_VERSION; 5443 smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE; 5444 smp->class_version = 1; 5445 smp->method = IB_MGMT_METHOD_SEND; 5446 smp->hop_cnt = 1; 5447 smp->attr_id = QIB_VENDOR_IPG; 5448 smp->attr_mod = 0; 5449 5450 if (!ret) 5451 ret = ib_post_send_mad(send_buf, NULL); 5452 if (ret) 5453 ib_free_send_mad(send_buf); 5454 retry: 5455 delay = 2 << ppd->cpspec->ipg_tries; 5456 queue_delayed_work(ib_wq, &ppd->cpspec->ipg_work, 5457 msecs_to_jiffies(delay)); 5458 } 5459 5460 /* 5461 * Timeout handler for setting IPG. 5462 * Only called if r1. 5463 */ 5464 static void ipg_7322_work(struct work_struct *work) 5465 { 5466 struct qib_pportdata *ppd; 5467 5468 ppd = container_of(work, struct qib_chippport_specific, 5469 ipg_work.work)->ppd; 5470 if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE)) 5471 && ++ppd->cpspec->ipg_tries <= 10) 5472 try_7322_ipg(ppd); 5473 } 5474 5475 static u32 qib_7322_iblink_state(u64 ibcs) 5476 { 5477 u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState); 5478 5479 switch (state) { 5480 case IB_7322_L_STATE_INIT: 5481 state = IB_PORT_INIT; 5482 break; 5483 case IB_7322_L_STATE_ARM: 5484 state = IB_PORT_ARMED; 5485 break; 5486 case IB_7322_L_STATE_ACTIVE: 5487 case IB_7322_L_STATE_ACT_DEFER: 5488 state = IB_PORT_ACTIVE; 5489 break; 5490 default: 5491 fallthrough; 5492 case IB_7322_L_STATE_DOWN: 5493 state = IB_PORT_DOWN; 5494 break; 5495 } 5496 return state; 5497 } 5498 5499 /* returns the IBTA port state, rather than the IBC link training state */ 5500 static u8 qib_7322_phys_portstate(u64 ibcs) 5501 { 5502 u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState); 5503 return qib_7322_physportstate[state]; 5504 } 5505 5506 static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) 5507 { 5508 int ret = 0, symadj = 0; 5509 unsigned long flags; 5510 int mult; 5511 5512 spin_lock_irqsave(&ppd->lflags_lock, flags); 5513 ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; 5514 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5515 5516 /* Update our picture of width and speed from chip */ 5517 if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) { 5518 ppd->link_speed_active = QIB_IB_QDR; 5519 mult = 4; 5520 } else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) { 5521 ppd->link_speed_active = QIB_IB_DDR; 5522 mult = 2; 5523 } else { 5524 ppd->link_speed_active = QIB_IB_SDR; 5525 mult = 1; 5526 } 5527 if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) { 5528 ppd->link_width_active = IB_WIDTH_4X; 5529 mult *= 4; 5530 } else 5531 ppd->link_width_active = IB_WIDTH_1X; 5532 ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)]; 5533 5534 if (!ibup) { 5535 u64 clr; 5536 5537 /* Link went down. */ 5538 /* do IPG MAD again after linkdown, even if last time failed */ 5539 ppd->cpspec->ipg_tries = 0; 5540 clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) & 5541 (SYM_MASK(IBCStatusB_0, heartbeat_timed_out) | 5542 SYM_MASK(IBCStatusB_0, heartbeat_crosstalk)); 5543 if (clr) 5544 qib_write_kreg_port(ppd, krp_ibcstatus_b, clr); 5545 if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | 5546 QIBL_IB_AUTONEG_INPROG))) 5547 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5548 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5549 struct qib_qsfp_data *qd = 5550 &ppd->cpspec->qsfp_data; 5551 /* unlock the Tx settings, speed may change */ 5552 qib_write_kreg_port(ppd, krp_tx_deemph_override, 5553 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 5554 reset_tx_deemphasis_override)); 5555 qib_cancel_sends(ppd); 5556 /* on link down, ensure sane pcs state */ 5557 qib_7322_mini_pcs_reset(ppd); 5558 /* schedule the qsfp refresh which should turn the link 5559 off */ 5560 if (ppd->dd->flags & QIB_HAS_QSFP) { 5561 qd->t_insert = jiffies; 5562 queue_work(ib_wq, &qd->work); 5563 } 5564 spin_lock_irqsave(&ppd->sdma_lock, flags); 5565 if (__qib_sdma_running(ppd)) 5566 __qib_sdma_process_event(ppd, 5567 qib_sdma_event_e70_go_idle); 5568 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 5569 } 5570 clr = read_7322_creg32_port(ppd, crp_iblinkdown); 5571 if (clr == ppd->cpspec->iblnkdownsnap) 5572 ppd->cpspec->iblnkdowndelta++; 5573 } else { 5574 if (qib_compat_ddr_negotiate && 5575 !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | 5576 QIBL_IB_AUTONEG_INPROG)) && 5577 ppd->link_speed_active == QIB_IB_SDR && 5578 (ppd->link_speed_enabled & QIB_IB_DDR) 5579 && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) { 5580 /* we are SDR, and auto-negotiation enabled */ 5581 ++ppd->cpspec->autoneg_tries; 5582 if (!ppd->cpspec->ibdeltainprog) { 5583 ppd->cpspec->ibdeltainprog = 1; 5584 ppd->cpspec->ibsymdelta += 5585 read_7322_creg32_port(ppd, 5586 crp_ibsymbolerr) - 5587 ppd->cpspec->ibsymsnap; 5588 ppd->cpspec->iblnkerrdelta += 5589 read_7322_creg32_port(ppd, 5590 crp_iblinkerrrecov) - 5591 ppd->cpspec->iblnkerrsnap; 5592 } 5593 try_7322_autoneg(ppd); 5594 ret = 1; /* no other IB status change processing */ 5595 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && 5596 ppd->link_speed_active == QIB_IB_SDR) { 5597 qib_autoneg_7322_send(ppd, 1); 5598 set_7322_ibspeed_fast(ppd, QIB_IB_DDR); 5599 qib_7322_mini_pcs_reset(ppd); 5600 udelay(2); 5601 ret = 1; /* no other IB status change processing */ 5602 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && 5603 (ppd->link_speed_active & QIB_IB_DDR)) { 5604 spin_lock_irqsave(&ppd->lflags_lock, flags); 5605 ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG | 5606 QIBL_IB_AUTONEG_FAILED); 5607 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5608 ppd->cpspec->autoneg_tries = 0; 5609 /* re-enable SDR, for next link down */ 5610 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5611 wake_up(&ppd->cpspec->autoneg_wait); 5612 symadj = 1; 5613 } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) { 5614 /* 5615 * Clear autoneg failure flag, and do setup 5616 * so we'll try next time link goes down and 5617 * back to INIT (possibly connected to a 5618 * different device). 5619 */ 5620 spin_lock_irqsave(&ppd->lflags_lock, flags); 5621 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 5622 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5623 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK; 5624 symadj = 1; 5625 } 5626 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5627 symadj = 1; 5628 if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10) 5629 try_7322_ipg(ppd); 5630 if (!ppd->cpspec->recovery_init) 5631 setup_7322_link_recovery(ppd, 0); 5632 ppd->cpspec->qdr_dfe_time = jiffies + 5633 msecs_to_jiffies(QDR_DFE_DISABLE_DELAY); 5634 } 5635 ppd->cpspec->ibmalfusesnap = 0; 5636 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, 5637 crp_errlink); 5638 } 5639 if (symadj) { 5640 ppd->cpspec->iblnkdownsnap = 5641 read_7322_creg32_port(ppd, crp_iblinkdown); 5642 if (ppd->cpspec->ibdeltainprog) { 5643 ppd->cpspec->ibdeltainprog = 0; 5644 ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd, 5645 crp_ibsymbolerr) - ppd->cpspec->ibsymsnap; 5646 ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd, 5647 crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap; 5648 } 5649 } else if (!ibup && qib_compat_ddr_negotiate && 5650 !ppd->cpspec->ibdeltainprog && 5651 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5652 ppd->cpspec->ibdeltainprog = 1; 5653 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, 5654 crp_ibsymbolerr); 5655 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, 5656 crp_iblinkerrrecov); 5657 } 5658 5659 if (!ret) 5660 qib_setup_7322_setextled(ppd, ibup); 5661 return ret; 5662 } 5663 5664 /* 5665 * Does read/modify/write to appropriate registers to 5666 * set output and direction bits selected by mask. 5667 * these are in their canonical positions (e.g. lsb of 5668 * dir will end up in D48 of extctrl on existing chips). 5669 * returns contents of GP Inputs. 5670 */ 5671 static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) 5672 { 5673 u64 read_val, new_out; 5674 unsigned long flags; 5675 5676 if (mask) { 5677 /* some bits being written, lock access to GPIO */ 5678 dir &= mask; 5679 out &= mask; 5680 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 5681 dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); 5682 dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); 5683 new_out = (dd->cspec->gpio_out & ~mask) | out; 5684 5685 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 5686 qib_write_kreg(dd, kr_gpio_out, new_out); 5687 dd->cspec->gpio_out = new_out; 5688 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 5689 } 5690 /* 5691 * It is unlikely that a read at this time would get valid 5692 * data on a pin whose direction line was set in the same 5693 * call to this function. We include the read here because 5694 * that allows us to potentially combine a change on one pin with 5695 * a read on another, and because the old code did something like 5696 * this. 5697 */ 5698 read_val = qib_read_kreg64(dd, kr_extstatus); 5699 return SYM_FIELD(read_val, EXTStatus, GPIOIn); 5700 } 5701 5702 /* Enable writes to config EEPROM, if possible. Returns previous state */ 5703 static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen) 5704 { 5705 int prev_wen; 5706 u32 mask; 5707 5708 mask = 1 << QIB_EEPROM_WEN_NUM; 5709 prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM; 5710 gpio_7322_mod(dd, wen ? 0 : mask, mask, mask); 5711 5712 return prev_wen & 1; 5713 } 5714 5715 /* 5716 * Read fundamental info we need to use the chip. These are 5717 * the registers that describe chip capabilities, and are 5718 * saved in shadow registers. 5719 */ 5720 static void get_7322_chip_params(struct qib_devdata *dd) 5721 { 5722 u64 val; 5723 u32 piobufs; 5724 int mtu; 5725 5726 dd->palign = qib_read_kreg32(dd, kr_pagealign); 5727 5728 dd->uregbase = qib_read_kreg32(dd, kr_userregbase); 5729 5730 dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); 5731 dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); 5732 dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); 5733 dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); 5734 dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; 5735 5736 val = qib_read_kreg64(dd, kr_sendpiobufcnt); 5737 dd->piobcnt2k = val & ~0U; 5738 dd->piobcnt4k = val >> 32; 5739 val = qib_read_kreg64(dd, kr_sendpiosize); 5740 dd->piosize2k = val & ~0U; 5741 dd->piosize4k = val >> 32; 5742 5743 mtu = ib_mtu_enum_to_int(qib_ibmtu); 5744 if (mtu == -1) 5745 mtu = QIB_DEFAULT_MTU; 5746 dd->pport[0].ibmtu = (u32)mtu; 5747 dd->pport[1].ibmtu = (u32)mtu; 5748 5749 /* these may be adjusted in init_chip_wc_pat() */ 5750 dd->pio2kbase = (u32 __iomem *) 5751 ((char __iomem *) dd->kregbase + dd->pio2k_bufbase); 5752 dd->pio4kbase = (u32 __iomem *) 5753 ((char __iomem *) dd->kregbase + 5754 (dd->piobufbase >> 32)); 5755 /* 5756 * 4K buffers take 2 pages; we use roundup just to be 5757 * paranoid; we calculate it once here, rather than on 5758 * ever buf allocate 5759 */ 5760 dd->align4k = ALIGN(dd->piosize4k, dd->palign); 5761 5762 piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS; 5763 5764 dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / 5765 (sizeof(u64) * BITS_PER_BYTE / 2); 5766 } 5767 5768 /* 5769 * The chip base addresses in cspec and cpspec have to be set 5770 * after possible init_chip_wc_pat(), rather than in 5771 * get_7322_chip_params(), so split out as separate function 5772 */ 5773 static void qib_7322_set_baseaddrs(struct qib_devdata *dd) 5774 { 5775 u32 cregbase; 5776 5777 cregbase = qib_read_kreg32(dd, kr_counterregbase); 5778 5779 dd->cspec->cregbase = (u64 __iomem *)(cregbase + 5780 (char __iomem *)dd->kregbase); 5781 5782 dd->egrtidbase = (u64 __iomem *) 5783 ((char __iomem *) dd->kregbase + dd->rcvegrbase); 5784 5785 /* port registers are defined as relative to base of chip */ 5786 dd->pport[0].cpspec->kpregbase = 5787 (u64 __iomem *)((char __iomem *)dd->kregbase); 5788 dd->pport[1].cpspec->kpregbase = 5789 (u64 __iomem *)(dd->palign + 5790 (char __iomem *)dd->kregbase); 5791 dd->pport[0].cpspec->cpregbase = 5792 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[0], 5793 kr_counterregbase) + (char __iomem *)dd->kregbase); 5794 dd->pport[1].cpspec->cpregbase = 5795 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[1], 5796 kr_counterregbase) + (char __iomem *)dd->kregbase); 5797 } 5798 5799 /* 5800 * This is a fairly special-purpose observer, so we only support 5801 * the port-specific parts of SendCtrl 5802 */ 5803 5804 #define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) | \ 5805 SYM_MASK(SendCtrl_0, SDmaEnable) | \ 5806 SYM_MASK(SendCtrl_0, SDmaIntEnable) | \ 5807 SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \ 5808 SYM_MASK(SendCtrl_0, SDmaHalt) | \ 5809 SYM_MASK(SendCtrl_0, IBVLArbiterEn) | \ 5810 SYM_MASK(SendCtrl_0, ForceCreditUpToDate)) 5811 5812 static int sendctrl_hook(struct qib_devdata *dd, 5813 const struct diag_observer *op, u32 offs, 5814 u64 *data, u64 mask, int only_32) 5815 { 5816 unsigned long flags; 5817 unsigned idx; 5818 unsigned pidx; 5819 struct qib_pportdata *ppd = NULL; 5820 u64 local_data, all_bits; 5821 5822 /* 5823 * The fixed correspondence between Physical ports and pports is 5824 * severed. We need to hunt for the ppd that corresponds 5825 * to the offset we got. And we have to do that without admitting 5826 * we know the stride, apparently. 5827 */ 5828 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 5829 u64 __iomem *psptr; 5830 u32 psoffs; 5831 5832 ppd = dd->pport + pidx; 5833 if (!ppd->cpspec->kpregbase) 5834 continue; 5835 5836 psptr = ppd->cpspec->kpregbase + krp_sendctrl; 5837 psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr); 5838 if (psoffs == offs) 5839 break; 5840 } 5841 5842 /* If pport is not being managed by driver, just avoid shadows. */ 5843 if (pidx >= dd->num_pports) 5844 ppd = NULL; 5845 5846 /* In any case, "idx" is flat index in kreg space */ 5847 idx = offs / sizeof(u64); 5848 5849 all_bits = ~0ULL; 5850 if (only_32) 5851 all_bits >>= 32; 5852 5853 spin_lock_irqsave(&dd->sendctrl_lock, flags); 5854 if (!ppd || (mask & all_bits) != all_bits) { 5855 /* 5856 * At least some mask bits are zero, so we need 5857 * to read. The judgement call is whether from 5858 * reg or shadow. First-cut: read reg, and complain 5859 * if any bits which should be shadowed are different 5860 * from their shadowed value. 5861 */ 5862 if (only_32) 5863 local_data = (u64)qib_read_kreg32(dd, idx); 5864 else 5865 local_data = qib_read_kreg64(dd, idx); 5866 *data = (local_data & ~mask) | (*data & mask); 5867 } 5868 if (mask) { 5869 /* 5870 * At least some mask bits are one, so we need 5871 * to write, but only shadow some bits. 5872 */ 5873 u64 sval, tval; /* Shadowed, transient */ 5874 5875 /* 5876 * New shadow val is bits we don't want to touch, 5877 * ORed with bits we do, that are intended for shadow. 5878 */ 5879 if (ppd) { 5880 sval = ppd->p_sendctrl & ~mask; 5881 sval |= *data & SENDCTRL_SHADOWED & mask; 5882 ppd->p_sendctrl = sval; 5883 } else 5884 sval = *data & SENDCTRL_SHADOWED & mask; 5885 tval = sval | (*data & ~SENDCTRL_SHADOWED & mask); 5886 qib_write_kreg(dd, idx, tval); 5887 qib_write_kreg(dd, kr_scratch, 0Ull); 5888 } 5889 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 5890 return only_32 ? 4 : 8; 5891 } 5892 5893 static const struct diag_observer sendctrl_0_observer = { 5894 sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64), 5895 KREG_IDX(SendCtrl_0) * sizeof(u64) 5896 }; 5897 5898 static const struct diag_observer sendctrl_1_observer = { 5899 sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64), 5900 KREG_IDX(SendCtrl_1) * sizeof(u64) 5901 }; 5902 5903 static ushort sdma_fetch_prio = 8; 5904 module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO); 5905 MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority"); 5906 5907 /* Besides logging QSFP events, we set appropriate TxDDS values */ 5908 static void init_txdds_table(struct qib_pportdata *ppd, int override); 5909 5910 static void qsfp_7322_event(struct work_struct *work) 5911 { 5912 struct qib_qsfp_data *qd; 5913 struct qib_pportdata *ppd; 5914 unsigned long pwrup; 5915 unsigned long flags; 5916 int ret; 5917 u32 le2; 5918 5919 qd = container_of(work, struct qib_qsfp_data, work); 5920 ppd = qd->ppd; 5921 pwrup = qd->t_insert + 5922 msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC); 5923 5924 /* Delay for 20 msecs to allow ModPrs resistor to setup */ 5925 mdelay(QSFP_MODPRS_LAG_MSEC); 5926 5927 if (!qib_qsfp_mod_present(ppd)) { 5928 ppd->cpspec->qsfp_data.modpresent = 0; 5929 /* Set the physical link to disabled */ 5930 qib_set_ib_7322_lstate(ppd, 0, 5931 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 5932 spin_lock_irqsave(&ppd->lflags_lock, flags); 5933 ppd->lflags &= ~QIBL_LINKV; 5934 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5935 } else { 5936 /* 5937 * Some QSFP's not only do not respond until the full power-up 5938 * time, but may behave badly if we try. So hold off responding 5939 * to insertion. 5940 */ 5941 while (1) { 5942 if (time_is_before_jiffies(pwrup)) 5943 break; 5944 msleep(20); 5945 } 5946 5947 ret = qib_refresh_qsfp_cache(ppd, &qd->cache); 5948 5949 /* 5950 * Need to change LE2 back to defaults if we couldn't 5951 * read the cable type (to handle cable swaps), so do this 5952 * even on failure to read cable information. We don't 5953 * get here for QME, so IS_QME check not needed here. 5954 */ 5955 if (!ret && !ppd->dd->cspec->r1) { 5956 if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) 5957 le2 = LE2_QME; 5958 else if (qd->cache.atten[1] >= qib_long_atten && 5959 QSFP_IS_CU(qd->cache.tech)) 5960 le2 = LE2_5m; 5961 else 5962 le2 = LE2_DEFAULT; 5963 } else 5964 le2 = LE2_DEFAULT; 5965 ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); 5966 /* 5967 * We always change parameteters, since we can choose 5968 * values for cables without eeproms, and the cable may have 5969 * changed from a cable with full or partial eeprom content 5970 * to one with partial or no content. 5971 */ 5972 init_txdds_table(ppd, 0); 5973 /* The physical link is being re-enabled only when the 5974 * previous state was DISABLED and the VALID bit is not 5975 * set. This should only happen when the cable has been 5976 * physically pulled. */ 5977 if (!ppd->cpspec->qsfp_data.modpresent && 5978 (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) { 5979 ppd->cpspec->qsfp_data.modpresent = 1; 5980 qib_set_ib_7322_lstate(ppd, 0, 5981 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); 5982 spin_lock_irqsave(&ppd->lflags_lock, flags); 5983 ppd->lflags |= QIBL_LINKV; 5984 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5985 } 5986 } 5987 } 5988 5989 /* 5990 * There is little we can do but complain to the user if QSFP 5991 * initialization fails. 5992 */ 5993 static void qib_init_7322_qsfp(struct qib_pportdata *ppd) 5994 { 5995 unsigned long flags; 5996 struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data; 5997 struct qib_devdata *dd = ppd->dd; 5998 u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N; 5999 6000 mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); 6001 qd->ppd = ppd; 6002 qib_qsfp_init(qd, qsfp_7322_event); 6003 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 6004 dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert)); 6005 dd->cspec->gpio_mask |= mod_prs_bit; 6006 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 6007 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 6008 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 6009 } 6010 6011 /* 6012 * called at device initialization time, and also if the txselect 6013 * module parameter is changed. This is used for cables that don't 6014 * have valid QSFP EEPROMs (not present, or attenuation is zero). 6015 * We initialize to the default, then if there is a specific 6016 * unit,port match, we use that (and set it immediately, for the 6017 * current speed, if the link is at INIT or better). 6018 * String format is "default# unit#,port#=# ... u,p=#", separators must 6019 * be a SPACE character. A newline terminates. The u,p=# tuples may 6020 * optionally have "u,p=#,#", where the final # is the H1 value 6021 * The last specific match is used (actually, all are used, but last 6022 * one is the one that winds up set); if none at all, fall back on default. 6023 */ 6024 static void set_no_qsfp_atten(struct qib_devdata *dd, int change) 6025 { 6026 char *nxt, *str; 6027 u32 pidx, unit, port, deflt, h1; 6028 unsigned long val; 6029 int any = 0, seth1; 6030 int txdds_size; 6031 6032 str = txselect_list; 6033 6034 /* default number is validated in setup_txselect() */ 6035 deflt = simple_strtoul(str, &nxt, 0); 6036 for (pidx = 0; pidx < dd->num_pports; ++pidx) 6037 dd->pport[pidx].cpspec->no_eep = deflt; 6038 6039 txdds_size = TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ; 6040 if (IS_QME(dd) || IS_QMH(dd)) 6041 txdds_size += TXDDS_MFG_SZ; 6042 6043 while (*nxt && nxt[1]) { 6044 str = ++nxt; 6045 unit = simple_strtoul(str, &nxt, 0); 6046 if (nxt == str || !*nxt || *nxt != ',') { 6047 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6048 ; 6049 continue; 6050 } 6051 str = ++nxt; 6052 port = simple_strtoul(str, &nxt, 0); 6053 if (nxt == str || *nxt != '=') { 6054 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6055 ; 6056 continue; 6057 } 6058 str = ++nxt; 6059 val = simple_strtoul(str, &nxt, 0); 6060 if (nxt == str) { 6061 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6062 ; 6063 continue; 6064 } 6065 if (val >= txdds_size) 6066 continue; 6067 seth1 = 0; 6068 h1 = 0; /* gcc thinks it might be used uninitted */ 6069 if (*nxt == ',' && nxt[1]) { 6070 str = ++nxt; 6071 h1 = (u32)simple_strtoul(str, &nxt, 0); 6072 if (nxt == str) 6073 while (*nxt && *nxt++ != ' ') /* skip */ 6074 ; 6075 else 6076 seth1 = 1; 6077 } 6078 for (pidx = 0; dd->unit == unit && pidx < dd->num_pports; 6079 ++pidx) { 6080 struct qib_pportdata *ppd = &dd->pport[pidx]; 6081 6082 if (ppd->port != port || !ppd->link_speed_supported) 6083 continue; 6084 ppd->cpspec->no_eep = val; 6085 if (seth1) 6086 ppd->cpspec->h1_val = h1; 6087 /* now change the IBC and serdes, overriding generic */ 6088 init_txdds_table(ppd, 1); 6089 /* Re-enable the physical state machine on mezz boards 6090 * now that the correct settings have been set. 6091 * QSFP boards are handles by the QSFP event handler */ 6092 if (IS_QMH(dd) || IS_QME(dd)) 6093 qib_set_ib_7322_lstate(ppd, 0, 6094 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); 6095 any++; 6096 } 6097 if (*nxt == '\n') 6098 break; /* done */ 6099 } 6100 if (change && !any) { 6101 /* no specific setting, use the default. 6102 * Change the IBC and serdes, but since it's 6103 * general, don't override specific settings. 6104 */ 6105 for (pidx = 0; pidx < dd->num_pports; ++pidx) 6106 if (dd->pport[pidx].link_speed_supported) 6107 init_txdds_table(&dd->pport[pidx], 0); 6108 } 6109 } 6110 6111 /* handle the txselect parameter changing */ 6112 static int setup_txselect(const char *str, const struct kernel_param *kp) 6113 { 6114 struct qib_devdata *dd; 6115 unsigned long index, val; 6116 char *n; 6117 6118 if (strlen(str) >= ARRAY_SIZE(txselect_list)) { 6119 pr_info("txselect_values string too long\n"); 6120 return -ENOSPC; 6121 } 6122 val = simple_strtoul(str, &n, 0); 6123 if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + 6124 TXDDS_MFG_SZ)) { 6125 pr_info("txselect_values must start with a number < %d\n", 6126 TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ); 6127 return -EINVAL; 6128 } 6129 strscpy(txselect_list, str, sizeof(txselect_list)); 6130 6131 xa_for_each(&qib_dev_table, index, dd) 6132 if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322) 6133 set_no_qsfp_atten(dd, 1); 6134 return 0; 6135 } 6136 6137 /* 6138 * Write the final few registers that depend on some of the 6139 * init setup. Done late in init, just before bringing up 6140 * the serdes. 6141 */ 6142 static int qib_late_7322_initreg(struct qib_devdata *dd) 6143 { 6144 int ret = 0, n; 6145 u64 val; 6146 6147 qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); 6148 qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); 6149 qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); 6150 qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); 6151 val = qib_read_kreg64(dd, kr_sendpioavailaddr); 6152 if (val != dd->pioavailregs_phys) { 6153 qib_dev_err(dd, 6154 "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n", 6155 (unsigned long) dd->pioavailregs_phys, 6156 (unsigned long long) val); 6157 ret = -EINVAL; 6158 } 6159 6160 n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 6161 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL); 6162 /* driver sends get pkey, lid, etc. checking also, to catch bugs */ 6163 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL); 6164 6165 qib_register_observer(dd, &sendctrl_0_observer); 6166 qib_register_observer(dd, &sendctrl_1_observer); 6167 6168 dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN; 6169 qib_write_kreg(dd, kr_control, dd->control); 6170 /* 6171 * Set SendDmaFetchPriority and init Tx params, including 6172 * QSFP handler on boards that have QSFP. 6173 * First set our default attenuation entry for cables that 6174 * don't have valid attenuation. 6175 */ 6176 set_no_qsfp_atten(dd, 0); 6177 for (n = 0; n < dd->num_pports; ++n) { 6178 struct qib_pportdata *ppd = dd->pport + n; 6179 6180 qib_write_kreg_port(ppd, krp_senddmaprioritythld, 6181 sdma_fetch_prio & 0xf); 6182 /* Initialize qsfp if present on board. */ 6183 if (dd->flags & QIB_HAS_QSFP) 6184 qib_init_7322_qsfp(ppd); 6185 } 6186 dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN; 6187 qib_write_kreg(dd, kr_control, dd->control); 6188 6189 return ret; 6190 } 6191 6192 /* per IB port errors. */ 6193 #define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \ 6194 MASK_ACROSS(8, 15)) 6195 #define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41)) 6196 #define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \ 6197 MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \ 6198 MASK_ACROSS(0, 11)) 6199 6200 /* 6201 * Write the initialization per-port registers that need to be done at 6202 * driver load and after reset completes (i.e., that aren't done as part 6203 * of other init procedures called from qib_init.c). 6204 * Some of these should be redundant on reset, but play safe. 6205 */ 6206 static void write_7322_init_portregs(struct qib_pportdata *ppd) 6207 { 6208 u64 val; 6209 int i; 6210 6211 if (!ppd->link_speed_supported) { 6212 /* no buffer credits for this port */ 6213 for (i = 1; i < 8; i++) 6214 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); 6215 qib_write_kreg_port(ppd, krp_ibcctrl_b, 0); 6216 qib_write_kreg(ppd->dd, kr_scratch, 0); 6217 return; 6218 } 6219 6220 /* 6221 * Set the number of supported virtual lanes in IBC, 6222 * for flow control packet handling on unsupported VLs 6223 */ 6224 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); 6225 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP); 6226 val |= (u64)(ppd->vls_supported - 1) << 6227 SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP); 6228 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 6229 6230 qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP); 6231 6232 /* enable tx header checking */ 6233 qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY | 6234 IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID | 6235 IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ); 6236 6237 qib_write_kreg_port(ppd, krp_ncmodectrl, 6238 SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal)); 6239 6240 /* 6241 * Unconditionally clear the bufmask bits. If SDMA is 6242 * enabled, we'll set them appropriately later. 6243 */ 6244 qib_write_kreg_port(ppd, krp_senddmabufmask0, 0); 6245 qib_write_kreg_port(ppd, krp_senddmabufmask1, 0); 6246 qib_write_kreg_port(ppd, krp_senddmabufmask2, 0); 6247 if (ppd->dd->cspec->r1) 6248 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate); 6249 } 6250 6251 /* 6252 * Write the initialization per-device registers that need to be done at 6253 * driver load and after reset completes (i.e., that aren't done as part 6254 * of other init procedures called from qib_init.c). Also write per-port 6255 * registers that are affected by overall device config, such as QP mapping 6256 * Some of these should be redundant on reset, but play safe. 6257 */ 6258 static void write_7322_initregs(struct qib_devdata *dd) 6259 { 6260 struct qib_pportdata *ppd; 6261 int i, pidx; 6262 u64 val; 6263 6264 /* Set Multicast QPs received by port 2 to map to context one. */ 6265 qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1); 6266 6267 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 6268 unsigned n, regno; 6269 unsigned long flags; 6270 6271 if (dd->n_krcv_queues < 2 || 6272 !dd->pport[pidx].link_speed_supported) 6273 continue; 6274 6275 ppd = &dd->pport[pidx]; 6276 6277 /* be paranoid against later code motion, etc. */ 6278 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 6279 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable); 6280 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 6281 6282 /* Initialize QP to context mapping */ 6283 regno = krp_rcvqpmaptable; 6284 val = 0; 6285 if (dd->num_pports > 1) 6286 n = dd->first_user_ctxt / dd->num_pports; 6287 else 6288 n = dd->first_user_ctxt - 1; 6289 for (i = 0; i < 32; ) { 6290 unsigned ctxt; 6291 6292 if (dd->num_pports > 1) 6293 ctxt = (i % n) * dd->num_pports + pidx; 6294 else if (i % n) 6295 ctxt = (i % n) + 1; 6296 else 6297 ctxt = ppd->hw_pidx; 6298 val |= ctxt << (5 * (i % 6)); 6299 i++; 6300 if (i % 6 == 0) { 6301 qib_write_kreg_port(ppd, regno, val); 6302 val = 0; 6303 regno++; 6304 } 6305 } 6306 qib_write_kreg_port(ppd, regno, val); 6307 } 6308 6309 /* 6310 * Setup up interrupt mitigation for kernel contexts, but 6311 * not user contexts (user contexts use interrupts when 6312 * stalled waiting for any packet, so want those interrupts 6313 * right away). 6314 */ 6315 for (i = 0; i < dd->first_user_ctxt; i++) { 6316 dd->cspec->rcvavail_timeout[i] = rcv_int_timeout; 6317 qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout); 6318 } 6319 6320 /* 6321 * Initialize as (disabled) rcvflow tables. Application code 6322 * will setup each flow as it uses the flow. 6323 * Doesn't clear any of the error bits that might be set. 6324 */ 6325 val = TIDFLOW_ERRBITS; /* these are W1C */ 6326 for (i = 0; i < dd->cfgctxts; i++) { 6327 int flow; 6328 6329 for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++) 6330 qib_write_ureg(dd, ur_rcvflowtable+flow, val, i); 6331 } 6332 6333 /* 6334 * dual cards init to dual port recovery, single port cards to 6335 * the one port. Dual port cards may later adjust to 1 port, 6336 * and then back to dual port if both ports are connected 6337 * */ 6338 if (dd->num_pports) 6339 setup_7322_link_recovery(dd->pport, dd->num_pports > 1); 6340 } 6341 6342 static int qib_init_7322_variables(struct qib_devdata *dd) 6343 { 6344 struct qib_pportdata *ppd; 6345 unsigned features, pidx, sbufcnt; 6346 int ret, mtu; 6347 u32 sbufs, updthresh; 6348 resource_size_t vl15off; 6349 6350 /* pport structs are contiguous, allocated after devdata */ 6351 ppd = (struct qib_pportdata *)(dd + 1); 6352 dd->pport = ppd; 6353 ppd[0].dd = dd; 6354 ppd[1].dd = dd; 6355 6356 dd->cspec = (struct qib_chip_specific *)(ppd + 2); 6357 6358 ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1); 6359 ppd[1].cpspec = &ppd[0].cpspec[1]; 6360 ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */ 6361 ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */ 6362 6363 spin_lock_init(&dd->cspec->rcvmod_lock); 6364 spin_lock_init(&dd->cspec->gpio_lock); 6365 6366 /* we haven't yet set QIB_PRESENT, so use read directly */ 6367 dd->revision = readq(&dd->kregbase[kr_revision]); 6368 6369 if ((dd->revision & 0xffffffffU) == 0xffffffffU) { 6370 qib_dev_err(dd, 6371 "Revision register read failure, giving up initialization\n"); 6372 ret = -ENODEV; 6373 goto bail; 6374 } 6375 dd->flags |= QIB_PRESENT; /* now register routines work */ 6376 6377 dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor); 6378 dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor); 6379 dd->cspec->r1 = dd->minrev == 1; 6380 6381 get_7322_chip_params(dd); 6382 features = qib_7322_boardname(dd); 6383 6384 /* now that piobcnt2k and 4k set, we can allocate these */ 6385 sbufcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 6386 6387 dd->cspec->sendchkenable = bitmap_zalloc(sbufcnt, GFP_KERNEL); 6388 dd->cspec->sendgrhchk = bitmap_zalloc(sbufcnt, GFP_KERNEL); 6389 dd->cspec->sendibchk = bitmap_zalloc(sbufcnt, GFP_KERNEL); 6390 if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk || 6391 !dd->cspec->sendibchk) { 6392 ret = -ENOMEM; 6393 goto bail; 6394 } 6395 6396 ppd = dd->pport; 6397 6398 /* 6399 * GPIO bits for TWSI data and clock, 6400 * used for serial EEPROM. 6401 */ 6402 dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; 6403 dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; 6404 dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV; 6405 6406 dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY | 6407 QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP | 6408 QIB_HAS_THRESH_UPDATE | 6409 (sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0); 6410 dd->flags |= qib_special_trigger ? 6411 QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA; 6412 6413 /* 6414 * Setup initial values. These may change when PAT is enabled, but 6415 * we need these to do initial chip register accesses. 6416 */ 6417 qib_7322_set_baseaddrs(dd); 6418 6419 mtu = ib_mtu_enum_to_int(qib_ibmtu); 6420 if (mtu == -1) 6421 mtu = QIB_DEFAULT_MTU; 6422 6423 dd->cspec->int_enable_mask = QIB_I_BITSEXTANT; 6424 /* all hwerrors become interrupts, unless special purposed */ 6425 dd->cspec->hwerrmask = ~0ULL; 6426 /* link_recovery setup causes these errors, so ignore them, 6427 * other than clearing them when they occur */ 6428 dd->cspec->hwerrmask &= 6429 ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) | 6430 SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) | 6431 HWE_MASK(LATriggered)); 6432 6433 for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) { 6434 struct qib_chippport_specific *cp = ppd->cpspec; 6435 6436 ppd->link_speed_supported = features & PORT_SPD_CAP; 6437 features >>= PORT_SPD_CAP_SHIFT; 6438 if (!ppd->link_speed_supported) { 6439 /* single port mode (7340, or configured) */ 6440 dd->skip_kctxt_mask |= 1 << pidx; 6441 if (pidx == 0) { 6442 /* Make sure port is disabled. */ 6443 qib_write_kreg_port(ppd, krp_rcvctrl, 0); 6444 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); 6445 ppd[0] = ppd[1]; 6446 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, 6447 IBSerdesPClkNotDetectMask_0) 6448 | SYM_MASK(HwErrMask, 6449 SDmaMemReadErrMask_0)); 6450 dd->cspec->int_enable_mask &= ~( 6451 SYM_MASK(IntMask, SDmaCleanupDoneMask_0) | 6452 SYM_MASK(IntMask, SDmaIdleIntMask_0) | 6453 SYM_MASK(IntMask, SDmaProgressIntMask_0) | 6454 SYM_MASK(IntMask, SDmaIntMask_0) | 6455 SYM_MASK(IntMask, ErrIntMask_0) | 6456 SYM_MASK(IntMask, SendDoneIntMask_0)); 6457 } else { 6458 /* Make sure port is disabled. */ 6459 qib_write_kreg_port(ppd, krp_rcvctrl, 0); 6460 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); 6461 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, 6462 IBSerdesPClkNotDetectMask_1) 6463 | SYM_MASK(HwErrMask, 6464 SDmaMemReadErrMask_1)); 6465 dd->cspec->int_enable_mask &= ~( 6466 SYM_MASK(IntMask, SDmaCleanupDoneMask_1) | 6467 SYM_MASK(IntMask, SDmaIdleIntMask_1) | 6468 SYM_MASK(IntMask, SDmaProgressIntMask_1) | 6469 SYM_MASK(IntMask, SDmaIntMask_1) | 6470 SYM_MASK(IntMask, ErrIntMask_1) | 6471 SYM_MASK(IntMask, SendDoneIntMask_1)); 6472 } 6473 continue; 6474 } 6475 6476 dd->num_pports++; 6477 ret = qib_init_pportdata(ppd, dd, pidx, dd->num_pports); 6478 if (ret) { 6479 dd->num_pports--; 6480 goto bail; 6481 } 6482 6483 ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; 6484 ppd->link_width_enabled = IB_WIDTH_4X; 6485 ppd->link_speed_enabled = ppd->link_speed_supported; 6486 /* 6487 * Set the initial values to reasonable default, will be set 6488 * for real when link is up. 6489 */ 6490 ppd->link_width_active = IB_WIDTH_4X; 6491 ppd->link_speed_active = QIB_IB_SDR; 6492 ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS]; 6493 switch (qib_num_cfg_vls) { 6494 case 1: 6495 ppd->vls_supported = IB_VL_VL0; 6496 break; 6497 case 2: 6498 ppd->vls_supported = IB_VL_VL0_1; 6499 break; 6500 default: 6501 qib_devinfo(dd->pcidev, 6502 "Invalid num_vls %u, using 4 VLs\n", 6503 qib_num_cfg_vls); 6504 qib_num_cfg_vls = 4; 6505 fallthrough; 6506 case 4: 6507 ppd->vls_supported = IB_VL_VL0_3; 6508 break; 6509 case 8: 6510 if (mtu <= 2048) 6511 ppd->vls_supported = IB_VL_VL0_7; 6512 else { 6513 qib_devinfo(dd->pcidev, 6514 "Invalid num_vls %u for MTU %d , using 4 VLs\n", 6515 qib_num_cfg_vls, mtu); 6516 ppd->vls_supported = IB_VL_VL0_3; 6517 qib_num_cfg_vls = 4; 6518 } 6519 break; 6520 } 6521 ppd->vls_operational = ppd->vls_supported; 6522 6523 init_waitqueue_head(&cp->autoneg_wait); 6524 INIT_DELAYED_WORK(&cp->autoneg_work, 6525 autoneg_7322_work); 6526 if (ppd->dd->cspec->r1) 6527 INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work); 6528 6529 /* 6530 * For Mez and similar cards, no qsfp info, so do 6531 * the "cable info" setup here. Can be overridden 6532 * in adapter-specific routines. 6533 */ 6534 if (!(dd->flags & QIB_HAS_QSFP)) { 6535 if (!IS_QMH(dd) && !IS_QME(dd)) 6536 qib_devinfo(dd->pcidev, 6537 "IB%u:%u: Unknown mezzanine card type\n", 6538 dd->unit, ppd->port); 6539 cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME; 6540 /* 6541 * Choose center value as default tx serdes setting 6542 * until changed through module parameter. 6543 */ 6544 ppd->cpspec->no_eep = IS_QMH(dd) ? 6545 TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4; 6546 } else 6547 cp->h1_val = H1_FORCE_VAL; 6548 6549 /* Avoid writes to chip for mini_init */ 6550 if (!qib_mini_init) 6551 write_7322_init_portregs(ppd); 6552 6553 timer_setup(&cp->chase_timer, reenable_chase, 0); 6554 6555 ppd++; 6556 } 6557 6558 dd->rcvhdrentsize = qib_rcvhdrentsize ? 6559 qib_rcvhdrentsize : QIB_RCVHDR_ENTSIZE; 6560 dd->rcvhdrsize = qib_rcvhdrsize ? 6561 qib_rcvhdrsize : QIB_DFLT_RCVHDRSIZE; 6562 dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); 6563 6564 /* we always allocate at least 2048 bytes for eager buffers */ 6565 dd->rcvegrbufsize = max(mtu, 2048); 6566 dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize); 6567 6568 qib_7322_tidtemplate(dd); 6569 6570 /* 6571 * We can request a receive interrupt for 1 or 6572 * more packets from current offset. 6573 */ 6574 dd->rhdrhead_intr_off = 6575 (u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT; 6576 6577 /* setup the stats timer; the add_timer is done at end of init */ 6578 timer_setup(&dd->stats_timer, qib_get_7322_faststats, 0); 6579 6580 dd->ureg_align = 0x10000; /* 64KB alignment */ 6581 6582 dd->piosize2kmax_dwords = dd->piosize2k >> 2; 6583 6584 qib_7322_config_ctxts(dd); 6585 qib_set_ctxtcnt(dd); 6586 6587 /* 6588 * We do not set WC on the VL15 buffers to avoid 6589 * a rare problem with unaligned writes from 6590 * interrupt-flushed store buffers, so we need 6591 * to map those separately here. We can't solve 6592 * this for the rarely used mtrr case. 6593 */ 6594 ret = init_chip_wc_pat(dd, 0); 6595 if (ret) 6596 goto bail; 6597 6598 /* vl15 buffers start just after the 4k buffers */ 6599 vl15off = dd->physaddr + (dd->piobufbase >> 32) + 6600 dd->piobcnt4k * dd->align4k; 6601 dd->piovl15base = ioremap(vl15off, 6602 NUM_VL15_BUFS * dd->align4k); 6603 if (!dd->piovl15base) { 6604 ret = -ENOMEM; 6605 goto bail; 6606 } 6607 6608 qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ 6609 6610 ret = 0; 6611 if (qib_mini_init) 6612 goto bail; 6613 if (!dd->num_pports) { 6614 qib_dev_err(dd, "No ports enabled, giving up initialization\n"); 6615 goto bail; /* no error, so can still figure out why err */ 6616 } 6617 6618 write_7322_initregs(dd); 6619 ret = qib_create_ctxts(dd); 6620 init_7322_cntrnames(dd); 6621 6622 updthresh = 8U; /* update threshold */ 6623 6624 /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA. 6625 * reserve the update threshold amount for other kernel use, such 6626 * as sending SMI, MAD, and ACKs, or 3, whichever is greater, 6627 * unless we aren't enabling SDMA, in which case we want to use 6628 * all the 4k bufs for the kernel. 6629 * if this was less than the update threshold, we could wait 6630 * a long time for an update. Coded this way because we 6631 * sometimes change the update threshold for various reasons, 6632 * and we want this to remain robust. 6633 */ 6634 if (dd->flags & QIB_HAS_SEND_DMA) { 6635 dd->cspec->sdmabufcnt = dd->piobcnt4k; 6636 sbufs = updthresh > 3 ? updthresh : 3; 6637 } else { 6638 dd->cspec->sdmabufcnt = 0; 6639 sbufs = dd->piobcnt4k; 6640 } 6641 dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k - 6642 dd->cspec->sdmabufcnt; 6643 dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs; 6644 dd->cspec->lastbuf_for_pio--; /* range is <= , not < */ 6645 dd->last_pio = dd->cspec->lastbuf_for_pio; 6646 dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ? 6647 dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0; 6648 6649 /* 6650 * If we have 16 user contexts, we will have 7 sbufs 6651 * per context, so reduce the update threshold to match. We 6652 * want to update before we actually run out, at low pbufs/ctxt 6653 * so give ourselves some margin. 6654 */ 6655 if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh) 6656 updthresh = dd->pbufsctxt - 2; 6657 dd->cspec->updthresh_dflt = updthresh; 6658 dd->cspec->updthresh = updthresh; 6659 6660 /* before full enable, no interrupts, no locking needed */ 6661 dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) 6662 << SYM_LSB(SendCtrl, AvailUpdThld)) | 6663 SYM_MASK(SendCtrl, SendBufAvailPad64Byte); 6664 6665 dd->psxmitwait_supported = 1; 6666 dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE; 6667 bail: 6668 if (!dd->ctxtcnt) 6669 dd->ctxtcnt = 1; /* for other initialization code */ 6670 6671 return ret; 6672 } 6673 6674 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc, 6675 u32 *pbufnum) 6676 { 6677 u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; 6678 struct qib_devdata *dd = ppd->dd; 6679 6680 /* last is same for 2k and 4k, because we use 4k if all 2k busy */ 6681 if (pbc & PBC_7322_VL15_SEND) { 6682 first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx; 6683 last = first; 6684 } else { 6685 if ((plen + 1) > dd->piosize2kmax_dwords) 6686 first = dd->piobcnt2k; 6687 else 6688 first = 0; 6689 last = dd->cspec->lastbuf_for_pio; 6690 } 6691 return qib_getsendbuf_range(dd, pbufnum, first, last); 6692 } 6693 6694 static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv, 6695 u32 start) 6696 { 6697 qib_write_kreg_port(ppd, krp_psinterval, intv); 6698 qib_write_kreg_port(ppd, krp_psstart, start); 6699 } 6700 6701 /* 6702 * Must be called with sdma_lock held, or before init finished. 6703 */ 6704 static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) 6705 { 6706 qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt); 6707 } 6708 6709 /* 6710 * sdma_lock should be acquired before calling this routine 6711 */ 6712 static void dump_sdma_7322_state(struct qib_pportdata *ppd) 6713 { 6714 u64 reg, reg1, reg2; 6715 6716 reg = qib_read_kreg_port(ppd, krp_senddmastatus); 6717 qib_dev_porterr(ppd->dd, ppd->port, 6718 "SDMA senddmastatus: 0x%016llx\n", reg); 6719 6720 reg = qib_read_kreg_port(ppd, krp_sendctrl); 6721 qib_dev_porterr(ppd->dd, ppd->port, 6722 "SDMA sendctrl: 0x%016llx\n", reg); 6723 6724 reg = qib_read_kreg_port(ppd, krp_senddmabase); 6725 qib_dev_porterr(ppd->dd, ppd->port, 6726 "SDMA senddmabase: 0x%016llx\n", reg); 6727 6728 reg = qib_read_kreg_port(ppd, krp_senddmabufmask0); 6729 reg1 = qib_read_kreg_port(ppd, krp_senddmabufmask1); 6730 reg2 = qib_read_kreg_port(ppd, krp_senddmabufmask2); 6731 qib_dev_porterr(ppd->dd, ppd->port, 6732 "SDMA senddmabufmask 0:%llx 1:%llx 2:%llx\n", 6733 reg, reg1, reg2); 6734 6735 /* get bufuse bits, clear them, and print them again if non-zero */ 6736 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); 6737 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg); 6738 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); 6739 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg1); 6740 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); 6741 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg2); 6742 /* 0 and 1 should always be zero, so print as short form */ 6743 qib_dev_porterr(ppd->dd, ppd->port, 6744 "SDMA current senddmabuf_use 0:%llx 1:%llx 2:%llx\n", 6745 reg, reg1, reg2); 6746 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); 6747 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); 6748 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); 6749 /* 0 and 1 should always be zero, so print as short form */ 6750 qib_dev_porterr(ppd->dd, ppd->port, 6751 "SDMA cleared senddmabuf_use 0:%llx 1:%llx 2:%llx\n", 6752 reg, reg1, reg2); 6753 6754 reg = qib_read_kreg_port(ppd, krp_senddmatail); 6755 qib_dev_porterr(ppd->dd, ppd->port, 6756 "SDMA senddmatail: 0x%016llx\n", reg); 6757 6758 reg = qib_read_kreg_port(ppd, krp_senddmahead); 6759 qib_dev_porterr(ppd->dd, ppd->port, 6760 "SDMA senddmahead: 0x%016llx\n", reg); 6761 6762 reg = qib_read_kreg_port(ppd, krp_senddmaheadaddr); 6763 qib_dev_porterr(ppd->dd, ppd->port, 6764 "SDMA senddmaheadaddr: 0x%016llx\n", reg); 6765 6766 reg = qib_read_kreg_port(ppd, krp_senddmalengen); 6767 qib_dev_porterr(ppd->dd, ppd->port, 6768 "SDMA senddmalengen: 0x%016llx\n", reg); 6769 6770 reg = qib_read_kreg_port(ppd, krp_senddmadesccnt); 6771 qib_dev_porterr(ppd->dd, ppd->port, 6772 "SDMA senddmadesccnt: 0x%016llx\n", reg); 6773 6774 reg = qib_read_kreg_port(ppd, krp_senddmaidlecnt); 6775 qib_dev_porterr(ppd->dd, ppd->port, 6776 "SDMA senddmaidlecnt: 0x%016llx\n", reg); 6777 6778 reg = qib_read_kreg_port(ppd, krp_senddmaprioritythld); 6779 qib_dev_porterr(ppd->dd, ppd->port, 6780 "SDMA senddmapriorityhld: 0x%016llx\n", reg); 6781 6782 reg = qib_read_kreg_port(ppd, krp_senddmareloadcnt); 6783 qib_dev_porterr(ppd->dd, ppd->port, 6784 "SDMA senddmareloadcnt: 0x%016llx\n", reg); 6785 6786 dump_sdma_state(ppd); 6787 } 6788 6789 static struct sdma_set_state_action sdma_7322_action_table[] = { 6790 [qib_sdma_state_s00_hw_down] = { 6791 .go_s99_running_tofalse = 1, 6792 .op_enable = 0, 6793 .op_intenable = 0, 6794 .op_halt = 0, 6795 .op_drain = 0, 6796 }, 6797 [qib_sdma_state_s10_hw_start_up_wait] = { 6798 .op_enable = 0, 6799 .op_intenable = 1, 6800 .op_halt = 1, 6801 .op_drain = 0, 6802 }, 6803 [qib_sdma_state_s20_idle] = { 6804 .op_enable = 1, 6805 .op_intenable = 1, 6806 .op_halt = 1, 6807 .op_drain = 0, 6808 }, 6809 [qib_sdma_state_s30_sw_clean_up_wait] = { 6810 .op_enable = 0, 6811 .op_intenable = 1, 6812 .op_halt = 1, 6813 .op_drain = 0, 6814 }, 6815 [qib_sdma_state_s40_hw_clean_up_wait] = { 6816 .op_enable = 1, 6817 .op_intenable = 1, 6818 .op_halt = 1, 6819 .op_drain = 0, 6820 }, 6821 [qib_sdma_state_s50_hw_halt_wait] = { 6822 .op_enable = 1, 6823 .op_intenable = 1, 6824 .op_halt = 1, 6825 .op_drain = 1, 6826 }, 6827 [qib_sdma_state_s99_running] = { 6828 .op_enable = 1, 6829 .op_intenable = 1, 6830 .op_halt = 0, 6831 .op_drain = 0, 6832 .go_s99_running_totrue = 1, 6833 }, 6834 }; 6835 6836 static void qib_7322_sdma_init_early(struct qib_pportdata *ppd) 6837 { 6838 ppd->sdma_state.set_state_action = sdma_7322_action_table; 6839 } 6840 6841 static int init_sdma_7322_regs(struct qib_pportdata *ppd) 6842 { 6843 struct qib_devdata *dd = ppd->dd; 6844 unsigned lastbuf, erstbuf; 6845 u64 senddmabufmask[3] = { 0 }; 6846 int n; 6847 6848 qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys); 6849 qib_sdma_7322_setlengen(ppd); 6850 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ 6851 qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt); 6852 qib_write_kreg_port(ppd, krp_senddmadesccnt, 0); 6853 qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys); 6854 6855 if (dd->num_pports) 6856 n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */ 6857 else 6858 n = dd->cspec->sdmabufcnt; /* failsafe for init */ 6859 erstbuf = (dd->piobcnt2k + dd->piobcnt4k) - 6860 ((dd->num_pports == 1 || ppd->port == 2) ? n : 6861 dd->cspec->sdmabufcnt); 6862 lastbuf = erstbuf + n; 6863 6864 ppd->sdma_state.first_sendbuf = erstbuf; 6865 ppd->sdma_state.last_sendbuf = lastbuf; 6866 for (; erstbuf < lastbuf; ++erstbuf) { 6867 unsigned word = erstbuf / BITS_PER_LONG; 6868 unsigned bit = erstbuf & (BITS_PER_LONG - 1); 6869 6870 senddmabufmask[word] |= 1ULL << bit; 6871 } 6872 qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]); 6873 qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]); 6874 qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]); 6875 return 0; 6876 } 6877 6878 /* sdma_lock must be held */ 6879 static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd) 6880 { 6881 struct qib_devdata *dd = ppd->dd; 6882 int sane; 6883 int use_dmahead; 6884 u16 swhead; 6885 u16 swtail; 6886 u16 cnt; 6887 u16 hwhead; 6888 6889 use_dmahead = __qib_sdma_running(ppd) && 6890 (dd->flags & QIB_HAS_SDMA_TIMEOUT); 6891 retry: 6892 hwhead = use_dmahead ? 6893 (u16) le64_to_cpu(*ppd->sdma_head_dma) : 6894 (u16) qib_read_kreg_port(ppd, krp_senddmahead); 6895 6896 swhead = ppd->sdma_descq_head; 6897 swtail = ppd->sdma_descq_tail; 6898 cnt = ppd->sdma_descq_cnt; 6899 6900 if (swhead < swtail) 6901 /* not wrapped */ 6902 sane = (hwhead >= swhead) & (hwhead <= swtail); 6903 else if (swhead > swtail) 6904 /* wrapped around */ 6905 sane = ((hwhead >= swhead) && (hwhead < cnt)) || 6906 (hwhead <= swtail); 6907 else 6908 /* empty */ 6909 sane = (hwhead == swhead); 6910 6911 if (unlikely(!sane)) { 6912 if (use_dmahead) { 6913 /* try one more time, directly from the register */ 6914 use_dmahead = 0; 6915 goto retry; 6916 } 6917 /* proceed as if no progress */ 6918 hwhead = swhead; 6919 } 6920 6921 return hwhead; 6922 } 6923 6924 static int qib_sdma_7322_busy(struct qib_pportdata *ppd) 6925 { 6926 u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus); 6927 6928 return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) || 6929 (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) || 6930 !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) || 6931 !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty)); 6932 } 6933 6934 /* 6935 * Compute the amount of delay before sending the next packet if the 6936 * port's send rate differs from the static rate set for the QP. 6937 * The delay affects the next packet and the amount of the delay is 6938 * based on the length of the this packet. 6939 */ 6940 static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen, 6941 u8 srate, u8 vl) 6942 { 6943 u8 snd_mult = ppd->delay_mult; 6944 u8 rcv_mult = ib_rate_to_delay[srate]; 6945 u32 ret; 6946 6947 ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0; 6948 6949 /* Indicate VL15, else set the VL in the control word */ 6950 if (vl == 15) 6951 ret |= PBC_7322_VL15_SEND_CTRL; 6952 else 6953 ret |= vl << PBC_VL_NUM_LSB; 6954 ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB; 6955 6956 return ret; 6957 } 6958 6959 /* 6960 * Enable the per-port VL15 send buffers for use. 6961 * They follow the rest of the buffers, without a config parameter. 6962 * This was in initregs, but that is done before the shadow 6963 * is set up, and this has to be done after the shadow is 6964 * set up. 6965 */ 6966 static void qib_7322_initvl15_bufs(struct qib_devdata *dd) 6967 { 6968 unsigned vl15bufs; 6969 6970 vl15bufs = dd->piobcnt2k + dd->piobcnt4k; 6971 qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS, 6972 TXCHK_CHG_TYPE_KERN, NULL); 6973 } 6974 6975 static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd) 6976 { 6977 if (rcd->ctxt < NUM_IB_PORTS) { 6978 if (rcd->dd->num_pports > 1) { 6979 rcd->rcvegrcnt = KCTXT0_EGRCNT / 2; 6980 rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0; 6981 } else { 6982 rcd->rcvegrcnt = KCTXT0_EGRCNT; 6983 rcd->rcvegr_tid_base = 0; 6984 } 6985 } else { 6986 rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt; 6987 rcd->rcvegr_tid_base = KCTXT0_EGRCNT + 6988 (rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt; 6989 } 6990 } 6991 6992 #define QTXSLEEPS 5000 6993 static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start, 6994 u32 len, u32 which, struct qib_ctxtdata *rcd) 6995 { 6996 int i; 6997 const int last = start + len - 1; 6998 const int lastr = last / BITS_PER_LONG; 6999 u32 sleeps = 0; 7000 int wait = rcd != NULL; 7001 unsigned long flags; 7002 7003 while (wait) { 7004 unsigned long shadow = 0; 7005 int cstart, previ = -1; 7006 7007 /* 7008 * when flipping from kernel to user, we can't change 7009 * the checking type if the buffer is allocated to the 7010 * driver. It's OK the other direction, because it's 7011 * from close, and we have just disarm'ed all the 7012 * buffers. All the kernel to kernel changes are also 7013 * OK. 7014 */ 7015 for (cstart = start; cstart <= last; cstart++) { 7016 i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) 7017 / BITS_PER_LONG; 7018 if (i != previ) { 7019 shadow = (unsigned long) 7020 le64_to_cpu(dd->pioavailregs_dma[i]); 7021 previ = i; 7022 } 7023 if (test_bit(((2 * cstart) + 7024 QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) 7025 % BITS_PER_LONG, &shadow)) 7026 break; 7027 } 7028 7029 if (cstart > last) 7030 break; 7031 7032 if (sleeps == QTXSLEEPS) 7033 break; 7034 /* make sure we see an updated copy next time around */ 7035 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7036 sleeps++; 7037 msleep(20); 7038 } 7039 7040 switch (which) { 7041 case TXCHK_CHG_TYPE_DIS1: 7042 /* 7043 * disable checking on a range; used by diags; just 7044 * one buffer, but still written generically 7045 */ 7046 for (i = start; i <= last; i++) 7047 clear_bit(i, dd->cspec->sendchkenable); 7048 break; 7049 7050 case TXCHK_CHG_TYPE_ENAB1: 7051 /* 7052 * (re)enable checking on a range; used by diags; just 7053 * one buffer, but still written generically; read 7054 * scratch to be sure buffer actually triggered, not 7055 * just flushed from processor. 7056 */ 7057 qib_read_kreg32(dd, kr_scratch); 7058 for (i = start; i <= last; i++) 7059 set_bit(i, dd->cspec->sendchkenable); 7060 break; 7061 7062 case TXCHK_CHG_TYPE_KERN: 7063 /* usable by kernel */ 7064 for (i = start; i <= last; i++) { 7065 set_bit(i, dd->cspec->sendibchk); 7066 clear_bit(i, dd->cspec->sendgrhchk); 7067 } 7068 spin_lock_irqsave(&dd->uctxt_lock, flags); 7069 /* see if we need to raise avail update threshold */ 7070 for (i = dd->first_user_ctxt; 7071 dd->cspec->updthresh != dd->cspec->updthresh_dflt 7072 && i < dd->cfgctxts; i++) 7073 if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt && 7074 ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1) 7075 < dd->cspec->updthresh_dflt) 7076 break; 7077 spin_unlock_irqrestore(&dd->uctxt_lock, flags); 7078 if (i == dd->cfgctxts) { 7079 spin_lock_irqsave(&dd->sendctrl_lock, flags); 7080 dd->cspec->updthresh = dd->cspec->updthresh_dflt; 7081 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); 7082 dd->sendctrl |= (dd->cspec->updthresh & 7083 SYM_RMASK(SendCtrl, AvailUpdThld)) << 7084 SYM_LSB(SendCtrl, AvailUpdThld); 7085 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7086 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7087 } 7088 break; 7089 7090 case TXCHK_CHG_TYPE_USER: 7091 /* for user process */ 7092 for (i = start; i <= last; i++) { 7093 clear_bit(i, dd->cspec->sendibchk); 7094 set_bit(i, dd->cspec->sendgrhchk); 7095 } 7096 spin_lock_irqsave(&dd->sendctrl_lock, flags); 7097 if (rcd && rcd->subctxt_cnt && ((rcd->piocnt 7098 / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) { 7099 dd->cspec->updthresh = (rcd->piocnt / 7100 rcd->subctxt_cnt) - 1; 7101 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); 7102 dd->sendctrl |= (dd->cspec->updthresh & 7103 SYM_RMASK(SendCtrl, AvailUpdThld)) 7104 << SYM_LSB(SendCtrl, AvailUpdThld); 7105 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7106 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7107 } else 7108 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7109 break; 7110 7111 default: 7112 break; 7113 } 7114 7115 for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i) 7116 qib_write_kreg(dd, kr_sendcheckmask + i, 7117 dd->cspec->sendchkenable[i]); 7118 7119 for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) { 7120 qib_write_kreg(dd, kr_sendgrhcheckmask + i, 7121 dd->cspec->sendgrhchk[i]); 7122 qib_write_kreg(dd, kr_sendibpktmask + i, 7123 dd->cspec->sendibchk[i]); 7124 } 7125 7126 /* 7127 * Be sure whatever we did was seen by the chip and acted upon, 7128 * before we return. Mostly important for which >= 2. 7129 */ 7130 qib_read_kreg32(dd, kr_scratch); 7131 } 7132 7133 7134 /* useful for trigger analyzers, etc. */ 7135 static void writescratch(struct qib_devdata *dd, u32 val) 7136 { 7137 qib_write_kreg(dd, kr_scratch, val); 7138 } 7139 7140 /* Dummy for now, use chip regs soon */ 7141 static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum) 7142 { 7143 return -ENXIO; 7144 } 7145 7146 /** 7147 * qib_init_iba7322_funcs - set up the chip-specific function pointers 7148 * @pdev: the pci_dev for qlogic_ib device 7149 * @ent: pci_device_id struct for this dev 7150 * 7151 * Also allocates, inits, and returns the devdata struct for this 7152 * device instance 7153 * 7154 * This is global, and is called directly at init to set up the 7155 * chip-specific function pointers for later use. 7156 */ 7157 struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev, 7158 const struct pci_device_id *ent) 7159 { 7160 struct qib_devdata *dd; 7161 int ret, i; 7162 u32 tabsize, actual_cnt = 0; 7163 7164 dd = qib_alloc_devdata(pdev, 7165 NUM_IB_PORTS * sizeof(struct qib_pportdata) + 7166 sizeof(struct qib_chip_specific) + 7167 NUM_IB_PORTS * sizeof(struct qib_chippport_specific)); 7168 if (IS_ERR(dd)) 7169 goto bail; 7170 7171 dd->f_bringup_serdes = qib_7322_bringup_serdes; 7172 dd->f_cleanup = qib_setup_7322_cleanup; 7173 dd->f_clear_tids = qib_7322_clear_tids; 7174 dd->f_free_irq = qib_7322_free_irq; 7175 dd->f_get_base_info = qib_7322_get_base_info; 7176 dd->f_get_msgheader = qib_7322_get_msgheader; 7177 dd->f_getsendbuf = qib_7322_getsendbuf; 7178 dd->f_gpio_mod = gpio_7322_mod; 7179 dd->f_eeprom_wen = qib_7322_eeprom_wen; 7180 dd->f_hdrqempty = qib_7322_hdrqempty; 7181 dd->f_ib_updown = qib_7322_ib_updown; 7182 dd->f_init_ctxt = qib_7322_init_ctxt; 7183 dd->f_initvl15_bufs = qib_7322_initvl15_bufs; 7184 dd->f_intr_fallback = qib_7322_intr_fallback; 7185 dd->f_late_initreg = qib_late_7322_initreg; 7186 dd->f_setpbc_control = qib_7322_setpbc_control; 7187 dd->f_portcntr = qib_portcntr_7322; 7188 dd->f_put_tid = qib_7322_put_tid; 7189 dd->f_quiet_serdes = qib_7322_mini_quiet_serdes; 7190 dd->f_rcvctrl = rcvctrl_7322_mod; 7191 dd->f_read_cntrs = qib_read_7322cntrs; 7192 dd->f_read_portcntrs = qib_read_7322portcntrs; 7193 dd->f_reset = qib_do_7322_reset; 7194 dd->f_init_sdma_regs = init_sdma_7322_regs; 7195 dd->f_sdma_busy = qib_sdma_7322_busy; 7196 dd->f_sdma_gethead = qib_sdma_7322_gethead; 7197 dd->f_sdma_sendctrl = qib_7322_sdma_sendctrl; 7198 dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt; 7199 dd->f_sdma_update_tail = qib_sdma_update_7322_tail; 7200 dd->f_sendctrl = sendctrl_7322_mod; 7201 dd->f_set_armlaunch = qib_set_7322_armlaunch; 7202 dd->f_set_cntr_sample = qib_set_cntr_7322_sample; 7203 dd->f_iblink_state = qib_7322_iblink_state; 7204 dd->f_ibphys_portstate = qib_7322_phys_portstate; 7205 dd->f_get_ib_cfg = qib_7322_get_ib_cfg; 7206 dd->f_set_ib_cfg = qib_7322_set_ib_cfg; 7207 dd->f_set_ib_loopback = qib_7322_set_loopback; 7208 dd->f_get_ib_table = qib_7322_get_ib_table; 7209 dd->f_set_ib_table = qib_7322_set_ib_table; 7210 dd->f_set_intr_state = qib_7322_set_intr_state; 7211 dd->f_setextled = qib_setup_7322_setextled; 7212 dd->f_txchk_change = qib_7322_txchk_change; 7213 dd->f_update_usrhead = qib_update_7322_usrhead; 7214 dd->f_wantpiobuf_intr = qib_wantpiobuf_7322_intr; 7215 dd->f_xgxs_reset = qib_7322_mini_pcs_reset; 7216 dd->f_sdma_hw_clean_up = qib_7322_sdma_hw_clean_up; 7217 dd->f_sdma_hw_start_up = qib_7322_sdma_hw_start_up; 7218 dd->f_sdma_init_early = qib_7322_sdma_init_early; 7219 dd->f_writescratch = writescratch; 7220 dd->f_tempsense_rd = qib_7322_tempsense_rd; 7221 #ifdef CONFIG_INFINIBAND_QIB_DCA 7222 dd->f_notify_dca = qib_7322_notify_dca; 7223 #endif 7224 /* 7225 * Do remaining PCIe setup and save PCIe values in dd. 7226 * Any error printing is already done by the init code. 7227 * On return, we have the chip mapped, but chip registers 7228 * are not set up until start of qib_init_7322_variables. 7229 */ 7230 ret = qib_pcie_ddinit(dd, pdev, ent); 7231 if (ret < 0) 7232 goto bail_free; 7233 7234 /* initialize chip-specific variables */ 7235 ret = qib_init_7322_variables(dd); 7236 if (ret) 7237 goto bail_cleanup; 7238 7239 if (qib_mini_init || !dd->num_pports) 7240 goto bail; 7241 7242 /* 7243 * Determine number of vectors we want; depends on port count 7244 * and number of configured kernel receive queues actually used. 7245 * Should also depend on whether sdma is enabled or not, but 7246 * that's such a rare testing case it's not worth worrying about. 7247 */ 7248 tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table); 7249 for (i = 0; i < tabsize; i++) 7250 if ((i < ARRAY_SIZE(irq_table) && 7251 irq_table[i].port <= dd->num_pports) || 7252 (i >= ARRAY_SIZE(irq_table) && 7253 dd->rcd[i - ARRAY_SIZE(irq_table)])) 7254 actual_cnt++; 7255 /* reduce by ctxt's < 2 */ 7256 if (qib_krcvq01_no_msi) 7257 actual_cnt -= dd->num_pports; 7258 7259 tabsize = actual_cnt; 7260 dd->cspec->msix_entries = kcalloc(tabsize, 7261 sizeof(struct qib_msix_entry), 7262 GFP_KERNEL); 7263 if (!dd->cspec->msix_entries) 7264 tabsize = 0; 7265 7266 if (qib_pcie_params(dd, 8, &tabsize)) 7267 qib_dev_err(dd, 7268 "Failed to setup PCIe or interrupts; continuing anyway\n"); 7269 /* may be less than we wanted, if not enough available */ 7270 dd->cspec->num_msix_entries = tabsize; 7271 7272 /* setup interrupt handler */ 7273 qib_setup_7322_interrupt(dd, 1); 7274 7275 /* clear diagctrl register, in case diags were running and crashed */ 7276 qib_write_kreg(dd, kr_hwdiagctrl, 0); 7277 #ifdef CONFIG_INFINIBAND_QIB_DCA 7278 if (!dca_add_requester(&pdev->dev)) { 7279 qib_devinfo(dd->pcidev, "DCA enabled\n"); 7280 dd->flags |= QIB_DCA_ENABLED; 7281 qib_setup_dca(dd); 7282 } 7283 #endif 7284 goto bail; 7285 7286 bail_cleanup: 7287 qib_pcie_ddcleanup(dd); 7288 bail_free: 7289 qib_free_devdata(dd); 7290 dd = ERR_PTR(ret); 7291 bail: 7292 return dd; 7293 } 7294 7295 /* 7296 * Set the table entry at the specified index from the table specifed. 7297 * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first 7298 * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR. 7299 * 'idx' below addresses the correct entry, while its 4 LSBs select the 7300 * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table. 7301 */ 7302 #define DDS_ENT_AMP_LSB 14 7303 #define DDS_ENT_MAIN_LSB 9 7304 #define DDS_ENT_POST_LSB 5 7305 #define DDS_ENT_PRE_XTRA_LSB 3 7306 #define DDS_ENT_PRE_LSB 0 7307 7308 /* 7309 * Set one entry in the TxDDS table for spec'd port 7310 * ridx picks one of the entries, while tp points 7311 * to the appropriate table entry. 7312 */ 7313 static void set_txdds(struct qib_pportdata *ppd, int ridx, 7314 const struct txdds_ent *tp) 7315 { 7316 struct qib_devdata *dd = ppd->dd; 7317 u32 pack_ent; 7318 int regidx; 7319 7320 /* Get correct offset in chip-space, and in source table */ 7321 regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx; 7322 /* 7323 * We do not use qib_write_kreg_port() because it was intended 7324 * only for registers in the lower "port specific" pages. 7325 * So do index calculation by hand. 7326 */ 7327 if (ppd->hw_pidx) 7328 regidx += (dd->palign / sizeof(u64)); 7329 7330 pack_ent = tp->amp << DDS_ENT_AMP_LSB; 7331 pack_ent |= tp->main << DDS_ENT_MAIN_LSB; 7332 pack_ent |= tp->pre << DDS_ENT_PRE_LSB; 7333 pack_ent |= tp->post << DDS_ENT_POST_LSB; 7334 qib_write_kreg(dd, regidx, pack_ent); 7335 /* Prevent back-to-back writes by hitting scratch */ 7336 qib_write_kreg(ppd->dd, kr_scratch, 0); 7337 } 7338 7339 static const struct vendor_txdds_ent vendor_txdds[] = { 7340 { /* Amphenol 1m 30awg NoEq */ 7341 { 0x41, 0x50, 0x48 }, "584470002 ", 7342 { 10, 0, 0, 5 }, { 10, 0, 0, 9 }, { 7, 1, 0, 13 }, 7343 }, 7344 { /* Amphenol 3m 28awg NoEq */ 7345 { 0x41, 0x50, 0x48 }, "584470004 ", 7346 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 7, 15 }, 7347 }, 7348 { /* Finisar 3m OM2 Optical */ 7349 { 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL", 7350 { 0, 0, 0, 3 }, { 0, 0, 0, 4 }, { 0, 0, 0, 13 }, 7351 }, 7352 { /* Finisar 30m OM2 Optical */ 7353 { 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL", 7354 { 0, 0, 0, 1 }, { 0, 0, 0, 5 }, { 0, 0, 0, 11 }, 7355 }, 7356 { /* Finisar Default OM2 Optical */ 7357 { 0x00, 0x90, 0x65 }, NULL, 7358 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 0, 0, 12 }, 7359 }, 7360 { /* Gore 1m 30awg NoEq */ 7361 { 0x00, 0x21, 0x77 }, "QSN3300-1 ", 7362 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 0, 15 }, 7363 }, 7364 { /* Gore 2m 30awg NoEq */ 7365 { 0x00, 0x21, 0x77 }, "QSN3300-2 ", 7366 { 0, 0, 0, 8 }, { 0, 0, 0, 10 }, { 0, 1, 7, 15 }, 7367 }, 7368 { /* Gore 1m 28awg NoEq */ 7369 { 0x00, 0x21, 0x77 }, "QSN3800-1 ", 7370 { 0, 0, 0, 6 }, { 0, 0, 0, 8 }, { 0, 1, 0, 15 }, 7371 }, 7372 { /* Gore 3m 28awg NoEq */ 7373 { 0x00, 0x21, 0x77 }, "QSN3800-3 ", 7374 { 0, 0, 0, 9 }, { 0, 0, 0, 13 }, { 0, 1, 7, 15 }, 7375 }, 7376 { /* Gore 5m 24awg Eq */ 7377 { 0x00, 0x21, 0x77 }, "QSN7000-5 ", 7378 { 0, 0, 0, 7 }, { 0, 0, 0, 9 }, { 0, 1, 3, 15 }, 7379 }, 7380 { /* Gore 7m 24awg Eq */ 7381 { 0x00, 0x21, 0x77 }, "QSN7000-7 ", 7382 { 0, 0, 0, 9 }, { 0, 0, 0, 11 }, { 0, 2, 6, 15 }, 7383 }, 7384 { /* Gore 5m 26awg Eq */ 7385 { 0x00, 0x21, 0x77 }, "QSN7600-5 ", 7386 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 9, 13 }, 7387 }, 7388 { /* Gore 7m 26awg Eq */ 7389 { 0x00, 0x21, 0x77 }, "QSN7600-7 ", 7390 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 10, 1, 8, 15 }, 7391 }, 7392 { /* Intersil 12m 24awg Active */ 7393 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224", 7394 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 3, 0, 9 }, 7395 }, 7396 { /* Intersil 10m 28awg Active */ 7397 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028", 7398 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 2, 0, 2 }, 7399 }, 7400 { /* Intersil 7m 30awg Active */ 7401 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730", 7402 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 1, 0, 3 }, 7403 }, 7404 { /* Intersil 5m 32awg Active */ 7405 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532", 7406 { 0, 0, 0, 6 }, { 0, 0, 0, 6 }, { 0, 2, 0, 8 }, 7407 }, 7408 { /* Intersil Default Active */ 7409 { 0x00, 0x30, 0xB4 }, NULL, 7410 { 0, 0, 0, 6 }, { 0, 0, 0, 5 }, { 0, 2, 0, 5 }, 7411 }, 7412 { /* Luxtera 20m Active Optical */ 7413 { 0x00, 0x25, 0x63 }, NULL, 7414 { 0, 0, 0, 5 }, { 0, 0, 0, 8 }, { 0, 2, 0, 12 }, 7415 }, 7416 { /* Molex 1M Cu loopback */ 7417 { 0x00, 0x09, 0x3A }, "74763-0025 ", 7418 { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, 7419 }, 7420 { /* Molex 2m 28awg NoEq */ 7421 { 0x00, 0x09, 0x3A }, "74757-2201 ", 7422 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 1, 15 }, 7423 }, 7424 }; 7425 7426 static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = { 7427 /* amp, pre, main, post */ 7428 { 2, 2, 15, 6 }, /* Loopback */ 7429 { 0, 0, 0, 1 }, /* 2 dB */ 7430 { 0, 0, 0, 2 }, /* 3 dB */ 7431 { 0, 0, 0, 3 }, /* 4 dB */ 7432 { 0, 0, 0, 4 }, /* 5 dB */ 7433 { 0, 0, 0, 5 }, /* 6 dB */ 7434 { 0, 0, 0, 6 }, /* 7 dB */ 7435 { 0, 0, 0, 7 }, /* 8 dB */ 7436 { 0, 0, 0, 8 }, /* 9 dB */ 7437 { 0, 0, 0, 9 }, /* 10 dB */ 7438 { 0, 0, 0, 10 }, /* 11 dB */ 7439 { 0, 0, 0, 11 }, /* 12 dB */ 7440 { 0, 0, 0, 12 }, /* 13 dB */ 7441 { 0, 0, 0, 13 }, /* 14 dB */ 7442 { 0, 0, 0, 14 }, /* 15 dB */ 7443 { 0, 0, 0, 15 }, /* 16 dB */ 7444 }; 7445 7446 static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = { 7447 /* amp, pre, main, post */ 7448 { 2, 2, 15, 6 }, /* Loopback */ 7449 { 0, 0, 0, 8 }, /* 2 dB */ 7450 { 0, 0, 0, 8 }, /* 3 dB */ 7451 { 0, 0, 0, 9 }, /* 4 dB */ 7452 { 0, 0, 0, 9 }, /* 5 dB */ 7453 { 0, 0, 0, 10 }, /* 6 dB */ 7454 { 0, 0, 0, 10 }, /* 7 dB */ 7455 { 0, 0, 0, 11 }, /* 8 dB */ 7456 { 0, 0, 0, 11 }, /* 9 dB */ 7457 { 0, 0, 0, 12 }, /* 10 dB */ 7458 { 0, 0, 0, 12 }, /* 11 dB */ 7459 { 0, 0, 0, 13 }, /* 12 dB */ 7460 { 0, 0, 0, 13 }, /* 13 dB */ 7461 { 0, 0, 0, 14 }, /* 14 dB */ 7462 { 0, 0, 0, 14 }, /* 15 dB */ 7463 { 0, 0, 0, 15 }, /* 16 dB */ 7464 }; 7465 7466 static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = { 7467 /* amp, pre, main, post */ 7468 { 2, 2, 15, 6 }, /* Loopback */ 7469 { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */ 7470 { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */ 7471 { 0, 1, 0, 11 }, /* 4 dB */ 7472 { 0, 1, 0, 13 }, /* 5 dB */ 7473 { 0, 1, 0, 15 }, /* 6 dB */ 7474 { 0, 1, 3, 15 }, /* 7 dB */ 7475 { 0, 1, 7, 15 }, /* 8 dB */ 7476 { 0, 1, 7, 15 }, /* 9 dB */ 7477 { 0, 1, 8, 15 }, /* 10 dB */ 7478 { 0, 1, 9, 15 }, /* 11 dB */ 7479 { 0, 1, 10, 15 }, /* 12 dB */ 7480 { 0, 2, 6, 15 }, /* 13 dB */ 7481 { 0, 2, 7, 15 }, /* 14 dB */ 7482 { 0, 2, 8, 15 }, /* 15 dB */ 7483 { 0, 2, 9, 15 }, /* 16 dB */ 7484 }; 7485 7486 /* 7487 * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ. 7488 * These are mostly used for mez cards going through connectors 7489 * and backplane traces, but can be used to add other "unusual" 7490 * table values as well. 7491 */ 7492 static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = { 7493 /* amp, pre, main, post */ 7494 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ 7495 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ 7496 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ 7497 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ 7498 { 0, 0, 0, 3 }, /* QMH7342 backplane settings */ 7499 { 0, 0, 0, 4 }, /* QMH7342 backplane settings */ 7500 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7501 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7502 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7503 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7504 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7505 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7506 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7507 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7508 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7509 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7510 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7511 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7512 }; 7513 7514 static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { 7515 /* amp, pre, main, post */ 7516 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ 7517 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ 7518 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ 7519 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ 7520 { 0, 0, 0, 9 }, /* QMH7342 backplane settings */ 7521 { 0, 0, 0, 10 }, /* QMH7342 backplane settings */ 7522 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7523 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7524 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7525 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7526 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7527 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7528 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7529 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7530 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7531 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7532 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7533 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7534 }; 7535 7536 static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { 7537 /* amp, pre, main, post */ 7538 { 0, 1, 0, 4 }, /* QMH7342 backplane settings */ 7539 { 0, 1, 0, 5 }, /* QMH7342 backplane settings */ 7540 { 0, 1, 0, 6 }, /* QMH7342 backplane settings */ 7541 { 0, 1, 0, 8 }, /* QMH7342 backplane settings */ 7542 { 0, 1, 0, 10 }, /* QMH7342 backplane settings */ 7543 { 0, 1, 0, 12 }, /* QMH7342 backplane settings */ 7544 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7545 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7546 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7547 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7548 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7549 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7550 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7551 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7552 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7553 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7554 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7555 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7556 }; 7557 7558 static const struct txdds_ent txdds_extra_mfg[TXDDS_MFG_SZ] = { 7559 /* amp, pre, main, post */ 7560 { 0, 0, 0, 0 }, /* QME7342 mfg settings */ 7561 { 0, 0, 0, 6 }, /* QME7342 P2 mfg settings */ 7562 }; 7563 7564 static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds, 7565 unsigned atten) 7566 { 7567 /* 7568 * The attenuation table starts at 2dB for entry 1, 7569 * with entry 0 being the loopback entry. 7570 */ 7571 if (atten <= 2) 7572 atten = 1; 7573 else if (atten > TXDDS_TABLE_SZ) 7574 atten = TXDDS_TABLE_SZ - 1; 7575 else 7576 atten--; 7577 return txdds + atten; 7578 } 7579 7580 /* 7581 * if override is set, the module parameter txselect has a value 7582 * for this specific port, so use it, rather than our normal mechanism. 7583 */ 7584 static void find_best_ent(struct qib_pportdata *ppd, 7585 const struct txdds_ent **sdr_dds, 7586 const struct txdds_ent **ddr_dds, 7587 const struct txdds_ent **qdr_dds, int override) 7588 { 7589 struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache; 7590 int idx; 7591 7592 /* Search table of known cables */ 7593 for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) { 7594 const struct vendor_txdds_ent *v = vendor_txdds + idx; 7595 7596 if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) && 7597 (!v->partnum || 7598 !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) { 7599 *sdr_dds = &v->sdr; 7600 *ddr_dds = &v->ddr; 7601 *qdr_dds = &v->qdr; 7602 return; 7603 } 7604 } 7605 7606 /* Active cables don't have attenuation so we only set SERDES 7607 * settings to account for the attenuation of the board traces. */ 7608 if (!override && QSFP_IS_ACTIVE(qd->tech)) { 7609 *sdr_dds = txdds_sdr + ppd->dd->board_atten; 7610 *ddr_dds = txdds_ddr + ppd->dd->board_atten; 7611 *qdr_dds = txdds_qdr + ppd->dd->board_atten; 7612 return; 7613 } 7614 7615 if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] || 7616 qd->atten[1])) { 7617 *sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]); 7618 *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]); 7619 *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]); 7620 return; 7621 } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) { 7622 /* 7623 * If we have no (or incomplete) data from the cable 7624 * EEPROM, or no QSFP, or override is set, use the 7625 * module parameter value to index into the attentuation 7626 * table. 7627 */ 7628 idx = ppd->cpspec->no_eep; 7629 *sdr_dds = &txdds_sdr[idx]; 7630 *ddr_dds = &txdds_ddr[idx]; 7631 *qdr_dds = &txdds_qdr[idx]; 7632 } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { 7633 /* similar to above, but index into the "extra" table. */ 7634 idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ; 7635 *sdr_dds = &txdds_extra_sdr[idx]; 7636 *ddr_dds = &txdds_extra_ddr[idx]; 7637 *qdr_dds = &txdds_extra_qdr[idx]; 7638 } else if ((IS_QME(ppd->dd) || IS_QMH(ppd->dd)) && 7639 ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + 7640 TXDDS_MFG_SZ)) { 7641 idx = ppd->cpspec->no_eep - (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ); 7642 pr_info("IB%u:%u use idx %u into txdds_mfg\n", 7643 ppd->dd->unit, ppd->port, idx); 7644 *sdr_dds = &txdds_extra_mfg[idx]; 7645 *ddr_dds = &txdds_extra_mfg[idx]; 7646 *qdr_dds = &txdds_extra_mfg[idx]; 7647 } else { 7648 /* this shouldn't happen, it's range checked */ 7649 *sdr_dds = txdds_sdr + qib_long_atten; 7650 *ddr_dds = txdds_ddr + qib_long_atten; 7651 *qdr_dds = txdds_qdr + qib_long_atten; 7652 } 7653 } 7654 7655 static void init_txdds_table(struct qib_pportdata *ppd, int override) 7656 { 7657 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; 7658 struct txdds_ent *dds; 7659 int idx; 7660 int single_ent = 0; 7661 7662 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override); 7663 7664 /* for mez cards or override, use the selected value for all entries */ 7665 if (!(ppd->dd->flags & QIB_HAS_QSFP) || override) 7666 single_ent = 1; 7667 7668 /* Fill in the first entry with the best entry found. */ 7669 set_txdds(ppd, 0, sdr_dds); 7670 set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds); 7671 set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds); 7672 if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | 7673 QIBL_LINKACTIVE)) { 7674 dds = (struct txdds_ent *)(ppd->link_speed_active == 7675 QIB_IB_QDR ? qdr_dds : 7676 (ppd->link_speed_active == 7677 QIB_IB_DDR ? ddr_dds : sdr_dds)); 7678 write_tx_serdes_param(ppd, dds); 7679 } 7680 7681 /* Fill in the remaining entries with the default table values. */ 7682 for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) { 7683 set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx); 7684 set_txdds(ppd, idx + TXDDS_TABLE_SZ, 7685 single_ent ? ddr_dds : txdds_ddr + idx); 7686 set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ, 7687 single_ent ? qdr_dds : txdds_qdr + idx); 7688 } 7689 } 7690 7691 #define KR_AHB_ACC KREG_IDX(ahb_access_ctrl) 7692 #define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg) 7693 #define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy) 7694 #define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address) 7695 #define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data) 7696 #define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read) 7697 #define AHB_TRANS_TRIES 10 7698 7699 /* 7700 * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4, 7701 * 5=subsystem which is why most calls have "chan + chan >> 1" 7702 * for the channel argument. 7703 */ 7704 static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr, 7705 u32 data, u32 mask) 7706 { 7707 u32 rd_data, wr_data, sz_mask; 7708 u64 trans, acc, prev_acc; 7709 u32 ret = 0xBAD0BAD; 7710 int tries; 7711 7712 prev_acc = qib_read_kreg64(dd, KR_AHB_ACC); 7713 /* From this point on, make sure we return access */ 7714 acc = (quad << 1) | 1; 7715 qib_write_kreg(dd, KR_AHB_ACC, acc); 7716 7717 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7718 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7719 if (trans & AHB_TRANS_RDY) 7720 break; 7721 } 7722 if (tries >= AHB_TRANS_TRIES) { 7723 qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES); 7724 goto bail; 7725 } 7726 7727 /* If mask is not all 1s, we need to read, but different SerDes 7728 * entities have different sizes 7729 */ 7730 sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1; 7731 wr_data = data & mask & sz_mask; 7732 if ((~mask & sz_mask) != 0) { 7733 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); 7734 qib_write_kreg(dd, KR_AHB_TRANS, trans); 7735 7736 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7737 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7738 if (trans & AHB_TRANS_RDY) 7739 break; 7740 } 7741 if (tries >= AHB_TRANS_TRIES) { 7742 qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n", 7743 AHB_TRANS_TRIES); 7744 goto bail; 7745 } 7746 /* Re-read in case host split reads and read data first */ 7747 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7748 rd_data = (uint32_t)(trans >> AHB_DATA_LSB); 7749 wr_data |= (rd_data & ~mask & sz_mask); 7750 } 7751 7752 /* If mask is not zero, we need to write. */ 7753 if (mask & sz_mask) { 7754 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); 7755 trans |= ((uint64_t)wr_data << AHB_DATA_LSB); 7756 trans |= AHB_WR; 7757 qib_write_kreg(dd, KR_AHB_TRANS, trans); 7758 7759 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7760 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7761 if (trans & AHB_TRANS_RDY) 7762 break; 7763 } 7764 if (tries >= AHB_TRANS_TRIES) { 7765 qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n", 7766 AHB_TRANS_TRIES); 7767 goto bail; 7768 } 7769 } 7770 ret = wr_data; 7771 bail: 7772 qib_write_kreg(dd, KR_AHB_ACC, prev_acc); 7773 return ret; 7774 } 7775 7776 static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, 7777 unsigned mask) 7778 { 7779 struct qib_devdata *dd = ppd->dd; 7780 int chan; 7781 7782 for (chan = 0; chan < SERDES_CHANS; ++chan) { 7783 ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, 7784 data, mask); 7785 ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, 7786 0, 0); 7787 } 7788 } 7789 7790 static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable) 7791 { 7792 u64 data = qib_read_kreg_port(ppd, krp_serdesctrl); 7793 u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN); 7794 7795 if (enable && !state) { 7796 pr_info("IB%u:%u Turning LOS on\n", 7797 ppd->dd->unit, ppd->port); 7798 data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN); 7799 } else if (!enable && state) { 7800 pr_info("IB%u:%u Turning LOS off\n", 7801 ppd->dd->unit, ppd->port); 7802 data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN); 7803 } 7804 qib_write_kreg_port(ppd, krp_serdesctrl, data); 7805 } 7806 7807 static int serdes_7322_init(struct qib_pportdata *ppd) 7808 { 7809 int ret = 0; 7810 7811 if (ppd->dd->cspec->r1) 7812 ret = serdes_7322_init_old(ppd); 7813 else 7814 ret = serdes_7322_init_new(ppd); 7815 return ret; 7816 } 7817 7818 static int serdes_7322_init_old(struct qib_pportdata *ppd) 7819 { 7820 u32 le_val; 7821 7822 /* 7823 * Initialize the Tx DDS tables. Also done every QSFP event, 7824 * for adapters with QSFP 7825 */ 7826 init_txdds_table(ppd, 0); 7827 7828 /* ensure no tx overrides from earlier driver loads */ 7829 qib_write_kreg_port(ppd, krp_tx_deemph_override, 7830 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 7831 reset_tx_deemphasis_override)); 7832 7833 /* Patch some SerDes defaults to "Better for IB" */ 7834 /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */ 7835 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); 7836 7837 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ 7838 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); 7839 /* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */ 7840 ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6)); 7841 7842 /* May be overridden in qsfp_7322_event */ 7843 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; 7844 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); 7845 7846 /* enable LE1 adaptation for all but QME, which is disabled */ 7847 le_val = IS_QME(ppd->dd) ? 0 : 1; 7848 ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5)); 7849 7850 /* Clear cmode-override, may be set from older driver */ 7851 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); 7852 7853 /* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */ 7854 ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8)); 7855 7856 /* setup LoS params; these are subsystem, so chan == 5 */ 7857 /* LoS filter threshold_count on, ch 0-3, set to 8 */ 7858 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); 7859 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); 7860 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); 7861 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); 7862 7863 /* LoS filter threshold_count off, ch 0-3, set to 4 */ 7864 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); 7865 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); 7866 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); 7867 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); 7868 7869 /* LoS filter select enabled */ 7870 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); 7871 7872 /* LoS target data: SDR=4, DDR=2, QDR=1 */ 7873 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ 7874 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ 7875 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ 7876 7877 serdes_7322_los_enable(ppd, 1); 7878 7879 /* rxbistena; set 0 to avoid effects of it switch later */ 7880 ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15); 7881 7882 /* Configure 4 DFE taps, and only they adapt */ 7883 ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0)); 7884 7885 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ 7886 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; 7887 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); 7888 7889 /* 7890 * Set receive adaptation mode. SDR and DDR adaptation are 7891 * always on, and QDR is initially enabled; later disabled. 7892 */ 7893 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); 7894 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); 7895 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 7896 ppd->dd->cspec->r1 ? 7897 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); 7898 ppd->cpspec->qdr_dfe_on = 1; 7899 7900 /* FLoop LOS gate: PPM filter enabled */ 7901 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); 7902 7903 /* rx offset center enabled */ 7904 ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4); 7905 7906 if (!ppd->dd->cspec->r1) { 7907 ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12); 7908 ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8); 7909 } 7910 7911 /* Set the frequency loop bandwidth to 15 */ 7912 ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5)); 7913 7914 return 0; 7915 } 7916 7917 static int serdes_7322_init_new(struct qib_pportdata *ppd) 7918 { 7919 unsigned long tend; 7920 u32 le_val, rxcaldone; 7921 int chan, chan_done = (1 << SERDES_CHANS) - 1; 7922 7923 /* Clear cmode-override, may be set from older driver */ 7924 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); 7925 7926 /* ensure no tx overrides from earlier driver loads */ 7927 qib_write_kreg_port(ppd, krp_tx_deemph_override, 7928 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 7929 reset_tx_deemphasis_override)); 7930 7931 /* START OF LSI SUGGESTED SERDES BRINGUP */ 7932 /* Reset - Calibration Setup */ 7933 /* Stop DFE adaptaion */ 7934 ibsd_wr_allchans(ppd, 1, 0, BMASK(9, 1)); 7935 /* Disable LE1 */ 7936 ibsd_wr_allchans(ppd, 13, 0, BMASK(5, 5)); 7937 /* Disable autoadapt for LE1 */ 7938 ibsd_wr_allchans(ppd, 1, 0, BMASK(15, 15)); 7939 /* Disable LE2 */ 7940 ibsd_wr_allchans(ppd, 13, 0, BMASK(6, 6)); 7941 /* Disable VGA */ 7942 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); 7943 /* Disable AFE Offset Cancel */ 7944 ibsd_wr_allchans(ppd, 12, 0, BMASK(12, 12)); 7945 /* Disable Timing Loop */ 7946 ibsd_wr_allchans(ppd, 2, 0, BMASK(3, 3)); 7947 /* Disable Frequency Loop */ 7948 ibsd_wr_allchans(ppd, 2, 0, BMASK(4, 4)); 7949 /* Disable Baseline Wander Correction */ 7950 ibsd_wr_allchans(ppd, 13, 0, BMASK(13, 13)); 7951 /* Disable RX Calibration */ 7952 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); 7953 /* Disable RX Offset Calibration */ 7954 ibsd_wr_allchans(ppd, 12, 0, BMASK(4, 4)); 7955 /* Select BB CDR */ 7956 ibsd_wr_allchans(ppd, 2, (1 << 15), BMASK(15, 15)); 7957 /* CDR Step Size */ 7958 ibsd_wr_allchans(ppd, 5, 0, BMASK(9, 8)); 7959 /* Enable phase Calibration */ 7960 ibsd_wr_allchans(ppd, 12, (1 << 5), BMASK(5, 5)); 7961 /* DFE Bandwidth [2:14-12] */ 7962 ibsd_wr_allchans(ppd, 2, (4 << 12), BMASK(14, 12)); 7963 /* DFE Config (4 taps only) */ 7964 ibsd_wr_allchans(ppd, 16, 0, BMASK(1, 0)); 7965 /* Gain Loop Bandwidth */ 7966 if (!ppd->dd->cspec->r1) { 7967 ibsd_wr_allchans(ppd, 12, 1 << 12, BMASK(12, 12)); 7968 ibsd_wr_allchans(ppd, 12, 2 << 8, BMASK(11, 8)); 7969 } else { 7970 ibsd_wr_allchans(ppd, 19, (3 << 11), BMASK(13, 11)); 7971 } 7972 /* Baseline Wander Correction Gain [13:4-0] (leave as default) */ 7973 /* Baseline Wander Correction Gain [3:7-5] (leave as default) */ 7974 /* Data Rate Select [5:7-6] (leave as default) */ 7975 /* RX Parallel Word Width [3:10-8] (leave as default) */ 7976 7977 /* RX REST */ 7978 /* Single- or Multi-channel reset */ 7979 /* RX Analog reset */ 7980 /* RX Digital reset */ 7981 ibsd_wr_allchans(ppd, 0, 0, BMASK(15, 13)); 7982 msleep(20); 7983 /* RX Analog reset */ 7984 ibsd_wr_allchans(ppd, 0, (1 << 14), BMASK(14, 14)); 7985 msleep(20); 7986 /* RX Digital reset */ 7987 ibsd_wr_allchans(ppd, 0, (1 << 13), BMASK(13, 13)); 7988 msleep(20); 7989 7990 /* setup LoS params; these are subsystem, so chan == 5 */ 7991 /* LoS filter threshold_count on, ch 0-3, set to 8 */ 7992 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); 7993 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); 7994 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); 7995 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); 7996 7997 /* LoS filter threshold_count off, ch 0-3, set to 4 */ 7998 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); 7999 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); 8000 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); 8001 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); 8002 8003 /* LoS filter select enabled */ 8004 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); 8005 8006 /* LoS target data: SDR=4, DDR=2, QDR=1 */ 8007 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ 8008 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ 8009 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ 8010 8011 /* Turn on LOS on initial SERDES init */ 8012 serdes_7322_los_enable(ppd, 1); 8013 /* FLoop LOS gate: PPM filter enabled */ 8014 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); 8015 8016 /* RX LATCH CALIBRATION */ 8017 /* Enable Eyefinder Phase Calibration latch */ 8018 ibsd_wr_allchans(ppd, 15, 1, BMASK(0, 0)); 8019 /* Enable RX Offset Calibration latch */ 8020 ibsd_wr_allchans(ppd, 12, (1 << 4), BMASK(4, 4)); 8021 msleep(20); 8022 /* Start Calibration */ 8023 ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10)); 8024 tend = jiffies + msecs_to_jiffies(500); 8025 while (chan_done && !time_is_before_jiffies(tend)) { 8026 msleep(20); 8027 for (chan = 0; chan < SERDES_CHANS; ++chan) { 8028 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 8029 (chan + (chan >> 1)), 8030 25, 0, 0); 8031 if ((~rxcaldone & (u32)BMASK(9, 9)) == 0 && 8032 (~chan_done & (1 << chan)) == 0) 8033 chan_done &= ~(1 << chan); 8034 } 8035 } 8036 if (chan_done) { 8037 pr_info("Serdes %d calibration not done after .5 sec: 0x%x\n", 8038 IBSD(ppd->hw_pidx), chan_done); 8039 } else { 8040 for (chan = 0; chan < SERDES_CHANS; ++chan) { 8041 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 8042 (chan + (chan >> 1)), 8043 25, 0, 0); 8044 if ((~rxcaldone & (u32)BMASK(10, 10)) == 0) 8045 pr_info("Serdes %d chan %d calibration failed\n", 8046 IBSD(ppd->hw_pidx), chan); 8047 } 8048 } 8049 8050 /* Turn off Calibration */ 8051 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); 8052 msleep(20); 8053 8054 /* BRING RX UP */ 8055 /* Set LE2 value (May be overridden in qsfp_7322_event) */ 8056 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; 8057 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); 8058 /* Set LE2 Loop bandwidth */ 8059 ibsd_wr_allchans(ppd, 3, (7 << 5), BMASK(7, 5)); 8060 /* Enable LE2 */ 8061 ibsd_wr_allchans(ppd, 13, (1 << 6), BMASK(6, 6)); 8062 msleep(20); 8063 /* Enable H0 only */ 8064 ibsd_wr_allchans(ppd, 1, 1, BMASK(9, 1)); 8065 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ 8066 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; 8067 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); 8068 /* Enable VGA */ 8069 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); 8070 msleep(20); 8071 /* Set Frequency Loop Bandwidth */ 8072 ibsd_wr_allchans(ppd, 2, (15 << 5), BMASK(8, 5)); 8073 /* Enable Frequency Loop */ 8074 ibsd_wr_allchans(ppd, 2, (1 << 4), BMASK(4, 4)); 8075 /* Set Timing Loop Bandwidth */ 8076 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); 8077 /* Enable Timing Loop */ 8078 ibsd_wr_allchans(ppd, 2, (1 << 3), BMASK(3, 3)); 8079 msleep(50); 8080 /* Enable DFE 8081 * Set receive adaptation mode. SDR and DDR adaptation are 8082 * always on, and QDR is initially enabled; later disabled. 8083 */ 8084 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); 8085 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); 8086 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 8087 ppd->dd->cspec->r1 ? 8088 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); 8089 ppd->cpspec->qdr_dfe_on = 1; 8090 /* Disable LE1 */ 8091 ibsd_wr_allchans(ppd, 13, (0 << 5), (1 << 5)); 8092 /* Disable auto adapt for LE1 */ 8093 ibsd_wr_allchans(ppd, 1, (0 << 15), BMASK(15, 15)); 8094 msleep(20); 8095 /* Enable AFE Offset Cancel */ 8096 ibsd_wr_allchans(ppd, 12, (1 << 12), BMASK(12, 12)); 8097 /* Enable Baseline Wander Correction */ 8098 ibsd_wr_allchans(ppd, 12, (1 << 13), BMASK(13, 13)); 8099 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ 8100 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); 8101 /* VGA output common mode */ 8102 ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2)); 8103 8104 /* 8105 * Initialize the Tx DDS tables. Also done every QSFP event, 8106 * for adapters with QSFP 8107 */ 8108 init_txdds_table(ppd, 0); 8109 8110 return 0; 8111 } 8112 8113 /* start adjust QMH serdes parameters */ 8114 8115 static void set_man_code(struct qib_pportdata *ppd, int chan, int code) 8116 { 8117 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8118 9, code << 9, 0x3f << 9); 8119 } 8120 8121 static void set_man_mode_h1(struct qib_pportdata *ppd, int chan, 8122 int enable, u32 tapenable) 8123 { 8124 if (enable) 8125 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8126 1, 3 << 10, 0x1f << 10); 8127 else 8128 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8129 1, 0, 0x1f << 10); 8130 } 8131 8132 /* Set clock to 1, 0, 1, 0 */ 8133 static void clock_man(struct qib_pportdata *ppd, int chan) 8134 { 8135 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8136 4, 0x4000, 0x4000); 8137 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8138 4, 0, 0x4000); 8139 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8140 4, 0x4000, 0x4000); 8141 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8142 4, 0, 0x4000); 8143 } 8144 8145 /* 8146 * write the current Tx serdes pre,post,main,amp settings into the serdes. 8147 * The caller must pass the settings appropriate for the current speed, 8148 * or not care if they are correct for the current speed. 8149 */ 8150 static void write_tx_serdes_param(struct qib_pportdata *ppd, 8151 struct txdds_ent *txdds) 8152 { 8153 u64 deemph; 8154 8155 deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override); 8156 /* field names for amp, main, post, pre, respectively */ 8157 deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) | 8158 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) | 8159 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) | 8160 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena)); 8161 8162 deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8163 tx_override_deemphasis_select); 8164 deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8165 txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8166 txampcntl_d2a); 8167 deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8168 txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8169 txc0_ena); 8170 deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8171 txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8172 txcp1_ena); 8173 deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8174 txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8175 txcn1_ena); 8176 qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph); 8177 } 8178 8179 /* 8180 * Set the parameters for mez cards on link bounce, so they are 8181 * always exactly what was requested. Similar logic to init_txdds 8182 * but does just the serdes. 8183 */ 8184 static void adj_tx_serdes(struct qib_pportdata *ppd) 8185 { 8186 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; 8187 struct txdds_ent *dds; 8188 8189 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1); 8190 dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? 8191 qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ? 8192 ddr_dds : sdr_dds)); 8193 write_tx_serdes_param(ppd, dds); 8194 } 8195 8196 /* set QDR forced value for H1, if needed */ 8197 static void force_h1(struct qib_pportdata *ppd) 8198 { 8199 int chan; 8200 8201 ppd->cpspec->qdr_reforce = 0; 8202 if (!ppd->dd->cspec->r1) 8203 return; 8204 8205 for (chan = 0; chan < SERDES_CHANS; chan++) { 8206 set_man_mode_h1(ppd, chan, 1, 0); 8207 set_man_code(ppd, chan, ppd->cpspec->h1_val); 8208 clock_man(ppd, chan); 8209 set_man_mode_h1(ppd, chan, 0, 0); 8210 } 8211 } 8212 8213 #define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN) 8214 #define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en) 8215 8216 #define R_OPCODE_LSB 3 8217 #define R_OP_NOP 0 8218 #define R_OP_SHIFT 2 8219 #define R_OP_UPDATE 3 8220 #define R_TDI_LSB 2 8221 #define R_TDO_LSB 1 8222 #define R_RDY 1 8223 8224 static int qib_r_grab(struct qib_devdata *dd) 8225 { 8226 u64 val = SJA_EN; 8227 8228 qib_write_kreg(dd, kr_r_access, val); 8229 qib_read_kreg32(dd, kr_scratch); 8230 return 0; 8231 } 8232 8233 /* qib_r_wait_for_rdy() not only waits for the ready bit, it 8234 * returns the current state of R_TDO 8235 */ 8236 static int qib_r_wait_for_rdy(struct qib_devdata *dd) 8237 { 8238 u64 val; 8239 int timeout; 8240 8241 for (timeout = 0; timeout < 100 ; ++timeout) { 8242 val = qib_read_kreg32(dd, kr_r_access); 8243 if (val & R_RDY) 8244 return (val >> R_TDO_LSB) & 1; 8245 } 8246 return -1; 8247 } 8248 8249 static int qib_r_shift(struct qib_devdata *dd, int bisten, 8250 int len, u8 *inp, u8 *outp) 8251 { 8252 u64 valbase, val; 8253 int ret, pos; 8254 8255 valbase = SJA_EN | (bisten << BISTEN_LSB) | 8256 (R_OP_SHIFT << R_OPCODE_LSB); 8257 ret = qib_r_wait_for_rdy(dd); 8258 if (ret < 0) 8259 goto bail; 8260 for (pos = 0; pos < len; ++pos) { 8261 val = valbase; 8262 if (outp) { 8263 outp[pos >> 3] &= ~(1 << (pos & 7)); 8264 outp[pos >> 3] |= (ret << (pos & 7)); 8265 } 8266 if (inp) { 8267 int tdi = inp[pos >> 3] >> (pos & 7); 8268 8269 val |= ((tdi & 1) << R_TDI_LSB); 8270 } 8271 qib_write_kreg(dd, kr_r_access, val); 8272 qib_read_kreg32(dd, kr_scratch); 8273 ret = qib_r_wait_for_rdy(dd); 8274 if (ret < 0) 8275 break; 8276 } 8277 /* Restore to NOP between operations. */ 8278 val = SJA_EN | (bisten << BISTEN_LSB); 8279 qib_write_kreg(dd, kr_r_access, val); 8280 qib_read_kreg32(dd, kr_scratch); 8281 ret = qib_r_wait_for_rdy(dd); 8282 8283 if (ret >= 0) 8284 ret = pos; 8285 bail: 8286 return ret; 8287 } 8288 8289 static int qib_r_update(struct qib_devdata *dd, int bisten) 8290 { 8291 u64 val; 8292 int ret; 8293 8294 val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB); 8295 ret = qib_r_wait_for_rdy(dd); 8296 if (ret >= 0) { 8297 qib_write_kreg(dd, kr_r_access, val); 8298 qib_read_kreg32(dd, kr_scratch); 8299 } 8300 return ret; 8301 } 8302 8303 #define BISTEN_PORT_SEL 15 8304 #define LEN_PORT_SEL 625 8305 #define BISTEN_AT 17 8306 #define LEN_AT 156 8307 #define BISTEN_ETM 16 8308 #define LEN_ETM 632 8309 8310 #define BIT2BYTE(x) (((x) + BITS_PER_BYTE - 1) / BITS_PER_BYTE) 8311 8312 /* these are common for all IB port use cases. */ 8313 static u8 reset_at[BIT2BYTE(LEN_AT)] = { 8314 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8315 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 8316 }; 8317 static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = { 8318 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8319 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8320 0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e, 8321 0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7, 8322 0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70, 8323 0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00, 8324 0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8325 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 8326 }; 8327 static u8 at[BIT2BYTE(LEN_AT)] = { 8328 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 8329 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 8330 }; 8331 8332 /* used for IB1 or IB2, only one in use */ 8333 static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = { 8334 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8335 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8336 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8337 0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00, 8338 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8339 0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03, 8340 0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00, 8341 0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00, 8342 }; 8343 8344 /* used when both IB1 and IB2 are in use */ 8345 static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = { 8346 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8347 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79, 8348 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8349 0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05, 8350 0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 8351 0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07, 8352 0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00, 8353 0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, 8354 }; 8355 8356 /* used when only IB1 is in use */ 8357 static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = { 8358 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 8359 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 8360 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8361 0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8362 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 8363 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8364 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8365 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 8366 }; 8367 8368 /* used when only IB2 is in use */ 8369 static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = { 8370 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39, 8371 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32, 8372 0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 8373 0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 8374 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32, 8375 0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 8376 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 8377 0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 8378 }; 8379 8380 /* used when both IB1 and IB2 are in use */ 8381 static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = { 8382 0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 8383 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 8384 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8385 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8386 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 8387 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a, 8388 0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8389 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 8390 }; 8391 8392 /* 8393 * Do setup to properly handle IB link recovery; if port is zero, we 8394 * are initializing to cover both ports; otherwise we are initializing 8395 * to cover a single port card, or the port has reached INIT and we may 8396 * need to switch coverage types. 8397 */ 8398 static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both) 8399 { 8400 u8 *portsel, *etm; 8401 struct qib_devdata *dd = ppd->dd; 8402 8403 if (!ppd->dd->cspec->r1) 8404 return; 8405 if (!both) { 8406 dd->cspec->recovery_ports_initted++; 8407 ppd->cpspec->recovery_init = 1; 8408 } 8409 if (!both && dd->cspec->recovery_ports_initted == 1) { 8410 portsel = ppd->port == 1 ? portsel_port1 : portsel_port2; 8411 etm = atetm_1port; 8412 } else { 8413 portsel = portsel_2port; 8414 etm = atetm_2port; 8415 } 8416 8417 if (qib_r_grab(dd) < 0 || 8418 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 || 8419 qib_r_update(dd, BISTEN_ETM) < 0 || 8420 qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 || 8421 qib_r_update(dd, BISTEN_AT) < 0 || 8422 qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL, 8423 portsel, NULL) < 0 || 8424 qib_r_update(dd, BISTEN_PORT_SEL) < 0 || 8425 qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 || 8426 qib_r_update(dd, BISTEN_AT) < 0 || 8427 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 || 8428 qib_r_update(dd, BISTEN_ETM) < 0) 8429 qib_dev_err(dd, "Failed IB link recovery setup\n"); 8430 } 8431 8432 static void check_7322_rxe_status(struct qib_pportdata *ppd) 8433 { 8434 struct qib_devdata *dd = ppd->dd; 8435 u64 fmask; 8436 8437 if (dd->cspec->recovery_ports_initted != 1) 8438 return; /* rest doesn't apply to dualport */ 8439 qib_write_kreg(dd, kr_control, dd->control | 8440 SYM_MASK(Control, FreezeMode)); 8441 (void)qib_read_kreg64(dd, kr_scratch); 8442 udelay(3); /* ibcreset asserted 400ns, be sure that's over */ 8443 fmask = qib_read_kreg64(dd, kr_act_fmask); 8444 if (!fmask) { 8445 /* 8446 * require a powercycle before we'll work again, and make 8447 * sure we get no more interrupts, and don't turn off 8448 * freeze. 8449 */ 8450 ppd->dd->cspec->stay_in_freeze = 1; 8451 qib_7322_set_intr_state(ppd->dd, 0); 8452 qib_write_kreg(dd, kr_fmask, 0ULL); 8453 qib_dev_err(dd, "HCA unusable until powercycled\n"); 8454 return; /* eventually reset */ 8455 } 8456 8457 qib_write_kreg(ppd->dd, kr_hwerrclear, 8458 SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1)); 8459 8460 /* don't do the full clear_freeze(), not needed for this */ 8461 qib_write_kreg(dd, kr_control, dd->control); 8462 qib_read_kreg32(dd, kr_scratch); 8463 /* take IBC out of reset */ 8464 if (ppd->link_speed_supported) { 8465 ppd->cpspec->ibcctrl_a &= 8466 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 8467 qib_write_kreg_port(ppd, krp_ibcctrl_a, 8468 ppd->cpspec->ibcctrl_a); 8469 qib_read_kreg32(dd, kr_scratch); 8470 if (ppd->lflags & QIBL_IB_LINK_DISABLED) 8471 qib_set_ib_7322_lstate(ppd, 0, 8472 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 8473 } 8474 } 8475