1 /* 2 * Copyright (c) 2012 Intel Corporation. All rights reserved. 3 * Copyright (c) 2008 - 2012 QLogic Corporation. All rights reserved. 4 * 5 * This software is available to you under a choice of one of two 6 * licenses. You may choose to be licensed under the terms of the GNU 7 * General Public License (GPL) Version 2, available from the file 8 * COPYING in the main directory of this source tree, or the 9 * OpenIB.org BSD license below: 10 * 11 * Redistribution and use in source and binary forms, with or 12 * without modification, are permitted provided that the following 13 * conditions are met: 14 * 15 * - Redistributions of source code must retain the above 16 * copyright notice, this list of conditions and the following 17 * disclaimer. 18 * 19 * - Redistributions in binary form must reproduce the above 20 * copyright notice, this list of conditions and the following 21 * disclaimer in the documentation and/or other materials 22 * provided with the distribution. 23 * 24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 31 * SOFTWARE. 32 */ 33 34 /* 35 * This file contains all of the code that is specific to the 36 * InfiniPath 7322 chip 37 */ 38 39 #include <linux/interrupt.h> 40 #include <linux/pci.h> 41 #include <linux/delay.h> 42 #include <linux/io.h> 43 #include <linux/jiffies.h> 44 #include <linux/module.h> 45 #include <rdma/ib_verbs.h> 46 #include <rdma/ib_smi.h> 47 #ifdef CONFIG_INFINIBAND_QIB_DCA 48 #include <linux/dca.h> 49 #endif 50 51 #include "qib.h" 52 #include "qib_7322_regs.h" 53 #include "qib_qsfp.h" 54 55 #include "qib_mad.h" 56 #include "qib_verbs.h" 57 58 #undef pr_fmt 59 #define pr_fmt(fmt) QIB_DRV_NAME " " fmt 60 61 static void qib_setup_7322_setextled(struct qib_pportdata *, u32); 62 static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t); 63 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op); 64 static irqreturn_t qib_7322intr(int irq, void *data); 65 static irqreturn_t qib_7322bufavail(int irq, void *data); 66 static irqreturn_t sdma_intr(int irq, void *data); 67 static irqreturn_t sdma_idle_intr(int irq, void *data); 68 static irqreturn_t sdma_progress_intr(int irq, void *data); 69 static irqreturn_t sdma_cleanup_intr(int irq, void *data); 70 static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32, 71 struct qib_ctxtdata *rcd); 72 static u8 qib_7322_phys_portstate(u64); 73 static u32 qib_7322_iblink_state(u64); 74 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, 75 u16 linitcmd); 76 static void force_h1(struct qib_pportdata *); 77 static void adj_tx_serdes(struct qib_pportdata *); 78 static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8); 79 static void qib_7322_mini_pcs_reset(struct qib_pportdata *); 80 81 static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32); 82 static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned); 83 static void serdes_7322_los_enable(struct qib_pportdata *, int); 84 static int serdes_7322_init_old(struct qib_pportdata *); 85 static int serdes_7322_init_new(struct qib_pportdata *); 86 static void dump_sdma_7322_state(struct qib_pportdata *); 87 88 #define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb)) 89 90 /* LE2 serdes values for different cases */ 91 #define LE2_DEFAULT 5 92 #define LE2_5m 4 93 #define LE2_QME 0 94 95 /* Below is special-purpose, so only really works for the IB SerDes blocks. */ 96 #define IBSD(hw_pidx) (hw_pidx + 2) 97 98 /* these are variables for documentation and experimentation purposes */ 99 static const unsigned rcv_int_timeout = 375; 100 static const unsigned rcv_int_count = 16; 101 static const unsigned sdma_idle_cnt = 64; 102 103 /* Time to stop altering Rx Equalization parameters, after link up. */ 104 #define RXEQ_DISABLE_MSECS 2500 105 106 /* 107 * Number of VLs we are configured to use (to allow for more 108 * credits per vl, etc.) 109 */ 110 ushort qib_num_cfg_vls = 2; 111 module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO); 112 MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)"); 113 114 static ushort qib_chase = 1; 115 module_param_named(chase, qib_chase, ushort, S_IRUGO); 116 MODULE_PARM_DESC(chase, "Enable state chase handling"); 117 118 static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */ 119 module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO); 120 MODULE_PARM_DESC(long_attenuation, 121 "attenuation cutoff (dB) for long copper cable setup"); 122 123 static ushort qib_singleport; 124 module_param_named(singleport, qib_singleport, ushort, S_IRUGO); 125 MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space"); 126 127 static ushort qib_krcvq01_no_msi; 128 module_param_named(krcvq01_no_msi, qib_krcvq01_no_msi, ushort, S_IRUGO); 129 MODULE_PARM_DESC(krcvq01_no_msi, "No MSI for kctx < 2"); 130 131 /* 132 * Receive header queue sizes 133 */ 134 static unsigned qib_rcvhdrcnt; 135 module_param_named(rcvhdrcnt, qib_rcvhdrcnt, uint, S_IRUGO); 136 MODULE_PARM_DESC(rcvhdrcnt, "receive header count"); 137 138 static unsigned qib_rcvhdrsize; 139 module_param_named(rcvhdrsize, qib_rcvhdrsize, uint, S_IRUGO); 140 MODULE_PARM_DESC(rcvhdrsize, "receive header size in 32-bit words"); 141 142 static unsigned qib_rcvhdrentsize; 143 module_param_named(rcvhdrentsize, qib_rcvhdrentsize, uint, S_IRUGO); 144 MODULE_PARM_DESC(rcvhdrentsize, "receive header entry size in 32-bit words"); 145 146 #define MAX_ATTEN_LEN 64 /* plenty for any real system */ 147 /* for read back, default index is ~5m copper cable */ 148 static char txselect_list[MAX_ATTEN_LEN] = "10"; 149 static struct kparam_string kp_txselect = { 150 .string = txselect_list, 151 .maxlen = MAX_ATTEN_LEN 152 }; 153 static int setup_txselect(const char *, struct kernel_param *); 154 module_param_call(txselect, setup_txselect, param_get_string, 155 &kp_txselect, S_IWUSR | S_IRUGO); 156 MODULE_PARM_DESC(txselect, 157 "Tx serdes indices (for no QSFP or invalid QSFP data)"); 158 159 #define BOARD_QME7342 5 160 #define BOARD_QMH7342 6 161 #define BOARD_QMH7360 9 162 #define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ 163 BOARD_QMH7342) 164 #define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ 165 BOARD_QME7342) 166 167 #define KREG_IDX(regname) (QIB_7322_##regname##_OFFS / sizeof(u64)) 168 169 #define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64))) 170 171 #define MASK_ACROSS(lsb, msb) \ 172 (((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb)) 173 174 #define SYM_RMASK(regname, fldname) ((u64) \ 175 QIB_7322_##regname##_##fldname##_RMASK) 176 177 #define SYM_MASK(regname, fldname) ((u64) \ 178 QIB_7322_##regname##_##fldname##_RMASK << \ 179 QIB_7322_##regname##_##fldname##_LSB) 180 181 #define SYM_FIELD(value, regname, fldname) ((u64) \ 182 (((value) >> SYM_LSB(regname, fldname)) & \ 183 SYM_RMASK(regname, fldname))) 184 185 /* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */ 186 #define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \ 187 (((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits)) 188 189 #define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) 190 #define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) 191 #define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask) 192 #define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask) 193 #define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port) 194 /* Below because most, but not all, fields of IntMask have that full suffix */ 195 #define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port) 196 197 198 #define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB) 199 200 /* 201 * the size bits give us 2^N, in KB units. 0 marks as invalid, 202 * and 7 is reserved. We currently use only 2KB and 4KB 203 */ 204 #define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB 205 #define IBA7322_TID_SZ_2K (1UL<<IBA7322_TID_SZ_SHIFT) /* 2KB */ 206 #define IBA7322_TID_SZ_4K (2UL<<IBA7322_TID_SZ_SHIFT) /* 4KB */ 207 #define IBA7322_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */ 208 209 #define SendIBSLIDAssignMask \ 210 QIB_7322_SendIBSLIDAssign_0_SendIBSLIDAssign_15_0_RMASK 211 #define SendIBSLMCMask \ 212 QIB_7322_SendIBSLIDMask_0_SendIBSLIDMask_15_0_RMASK 213 214 #define ExtLED_IB1_YEL SYM_MASK(EXTCtrl, LEDPort0YellowOn) 215 #define ExtLED_IB1_GRN SYM_MASK(EXTCtrl, LEDPort0GreenOn) 216 #define ExtLED_IB2_YEL SYM_MASK(EXTCtrl, LEDPort1YellowOn) 217 #define ExtLED_IB2_GRN SYM_MASK(EXTCtrl, LEDPort1GreenOn) 218 #define ExtLED_IB1_MASK (ExtLED_IB1_YEL | ExtLED_IB1_GRN) 219 #define ExtLED_IB2_MASK (ExtLED_IB2_YEL | ExtLED_IB2_GRN) 220 221 #define _QIB_GPIO_SDA_NUM 1 222 #define _QIB_GPIO_SCL_NUM 0 223 #define QIB_EEPROM_WEN_NUM 14 224 #define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7322 cards. */ 225 226 /* HW counter clock is at 4nsec */ 227 #define QIB_7322_PSXMITWAIT_CHECK_RATE 4000 228 229 /* full speed IB port 1 only */ 230 #define PORT_SPD_CAP (QIB_IB_SDR | QIB_IB_DDR | QIB_IB_QDR) 231 #define PORT_SPD_CAP_SHIFT 3 232 233 /* full speed featuremask, both ports */ 234 #define DUAL_PORT_CAP (PORT_SPD_CAP | (PORT_SPD_CAP << PORT_SPD_CAP_SHIFT)) 235 236 /* 237 * This file contains almost all the chip-specific register information and 238 * access functions for the FAKED QLogic InfiniPath 7322 PCI-Express chip. 239 */ 240 241 /* Use defines to tie machine-generated names to lower-case names */ 242 #define kr_contextcnt KREG_IDX(ContextCnt) 243 #define kr_control KREG_IDX(Control) 244 #define kr_counterregbase KREG_IDX(CntrRegBase) 245 #define kr_errclear KREG_IDX(ErrClear) 246 #define kr_errmask KREG_IDX(ErrMask) 247 #define kr_errstatus KREG_IDX(ErrStatus) 248 #define kr_extctrl KREG_IDX(EXTCtrl) 249 #define kr_extstatus KREG_IDX(EXTStatus) 250 #define kr_gpio_clear KREG_IDX(GPIOClear) 251 #define kr_gpio_mask KREG_IDX(GPIOMask) 252 #define kr_gpio_out KREG_IDX(GPIOOut) 253 #define kr_gpio_status KREG_IDX(GPIOStatus) 254 #define kr_hwdiagctrl KREG_IDX(HwDiagCtrl) 255 #define kr_debugportval KREG_IDX(DebugPortValueReg) 256 #define kr_fmask KREG_IDX(feature_mask) 257 #define kr_act_fmask KREG_IDX(active_feature_mask) 258 #define kr_hwerrclear KREG_IDX(HwErrClear) 259 #define kr_hwerrmask KREG_IDX(HwErrMask) 260 #define kr_hwerrstatus KREG_IDX(HwErrStatus) 261 #define kr_intclear KREG_IDX(IntClear) 262 #define kr_intmask KREG_IDX(IntMask) 263 #define kr_intredirect KREG_IDX(IntRedirect0) 264 #define kr_intstatus KREG_IDX(IntStatus) 265 #define kr_pagealign KREG_IDX(PageAlign) 266 #define kr_rcvavailtimeout KREG_IDX(RcvAvailTimeOut0) 267 #define kr_rcvctrl KREG_IDX(RcvCtrl) /* Common, but chip also has per-port */ 268 #define kr_rcvegrbase KREG_IDX(RcvEgrBase) 269 #define kr_rcvegrcnt KREG_IDX(RcvEgrCnt) 270 #define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt) 271 #define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize) 272 #define kr_rcvhdrsize KREG_IDX(RcvHdrSize) 273 #define kr_rcvtidbase KREG_IDX(RcvTIDBase) 274 #define kr_rcvtidcnt KREG_IDX(RcvTIDCnt) 275 #define kr_revision KREG_IDX(Revision) 276 #define kr_scratch KREG_IDX(Scratch) 277 #define kr_sendbuffererror KREG_IDX(SendBufErr0) /* and base for 1 and 2 */ 278 #define kr_sendcheckmask KREG_IDX(SendCheckMask0) /* and 1, 2 */ 279 #define kr_sendctrl KREG_IDX(SendCtrl) 280 #define kr_sendgrhcheckmask KREG_IDX(SendGRHCheckMask0) /* and 1, 2 */ 281 #define kr_sendibpktmask KREG_IDX(SendIBPacketMask0) /* and 1, 2 */ 282 #define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr) 283 #define kr_sendpiobufbase KREG_IDX(SendBufBase) 284 #define kr_sendpiobufcnt KREG_IDX(SendBufCnt) 285 #define kr_sendpiosize KREG_IDX(SendBufSize) 286 #define kr_sendregbase KREG_IDX(SendRegBase) 287 #define kr_sendbufavail0 KREG_IDX(SendBufAvail0) 288 #define kr_userregbase KREG_IDX(UserRegBase) 289 #define kr_intgranted KREG_IDX(Int_Granted) 290 #define kr_vecclr_wo_int KREG_IDX(vec_clr_without_int) 291 #define kr_intblocked KREG_IDX(IntBlocked) 292 #define kr_r_access KREG_IDX(SPC_JTAG_ACCESS_REG) 293 294 /* 295 * per-port kernel registers. Access only with qib_read_kreg_port() 296 * or qib_write_kreg_port() 297 */ 298 #define krp_errclear KREG_IBPORT_IDX(ErrClear) 299 #define krp_errmask KREG_IBPORT_IDX(ErrMask) 300 #define krp_errstatus KREG_IBPORT_IDX(ErrStatus) 301 #define krp_highprio_0 KREG_IBPORT_IDX(HighPriority0) 302 #define krp_highprio_limit KREG_IBPORT_IDX(HighPriorityLimit) 303 #define krp_hrtbt_guid KREG_IBPORT_IDX(HRTBT_GUID) 304 #define krp_ib_pcsconfig KREG_IBPORT_IDX(IBPCSConfig) 305 #define krp_ibcctrl_a KREG_IBPORT_IDX(IBCCtrlA) 306 #define krp_ibcctrl_b KREG_IBPORT_IDX(IBCCtrlB) 307 #define krp_ibcctrl_c KREG_IBPORT_IDX(IBCCtrlC) 308 #define krp_ibcstatus_a KREG_IBPORT_IDX(IBCStatusA) 309 #define krp_ibcstatus_b KREG_IBPORT_IDX(IBCStatusB) 310 #define krp_txestatus KREG_IBPORT_IDX(TXEStatus) 311 #define krp_lowprio_0 KREG_IBPORT_IDX(LowPriority0) 312 #define krp_ncmodectrl KREG_IBPORT_IDX(IBNCModeCtrl) 313 #define krp_partitionkey KREG_IBPORT_IDX(RcvPartitionKey) 314 #define krp_psinterval KREG_IBPORT_IDX(PSInterval) 315 #define krp_psstart KREG_IBPORT_IDX(PSStart) 316 #define krp_psstat KREG_IBPORT_IDX(PSStat) 317 #define krp_rcvbthqp KREG_IBPORT_IDX(RcvBTHQP) 318 #define krp_rcvctrl KREG_IBPORT_IDX(RcvCtrl) 319 #define krp_rcvpktledcnt KREG_IBPORT_IDX(RcvPktLEDCnt) 320 #define krp_rcvqpmaptable KREG_IBPORT_IDX(RcvQPMapTableA) 321 #define krp_rxcreditvl0 KREG_IBPORT_IDX(RxCreditVL0) 322 #define krp_rxcreditvl15 (KREG_IBPORT_IDX(RxCreditVL0)+15) 323 #define krp_sendcheckcontrol KREG_IBPORT_IDX(SendCheckControl) 324 #define krp_sendctrl KREG_IBPORT_IDX(SendCtrl) 325 #define krp_senddmabase KREG_IBPORT_IDX(SendDmaBase) 326 #define krp_senddmabufmask0 KREG_IBPORT_IDX(SendDmaBufMask0) 327 #define krp_senddmabufmask1 (KREG_IBPORT_IDX(SendDmaBufMask0) + 1) 328 #define krp_senddmabufmask2 (KREG_IBPORT_IDX(SendDmaBufMask0) + 2) 329 #define krp_senddmabuf_use0 KREG_IBPORT_IDX(SendDmaBufUsed0) 330 #define krp_senddmabuf_use1 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 1) 331 #define krp_senddmabuf_use2 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 2) 332 #define krp_senddmadesccnt KREG_IBPORT_IDX(SendDmaDescCnt) 333 #define krp_senddmahead KREG_IBPORT_IDX(SendDmaHead) 334 #define krp_senddmaheadaddr KREG_IBPORT_IDX(SendDmaHeadAddr) 335 #define krp_senddmaidlecnt KREG_IBPORT_IDX(SendDmaIdleCnt) 336 #define krp_senddmalengen KREG_IBPORT_IDX(SendDmaLenGen) 337 #define krp_senddmaprioritythld KREG_IBPORT_IDX(SendDmaPriorityThld) 338 #define krp_senddmareloadcnt KREG_IBPORT_IDX(SendDmaReloadCnt) 339 #define krp_senddmastatus KREG_IBPORT_IDX(SendDmaStatus) 340 #define krp_senddmatail KREG_IBPORT_IDX(SendDmaTail) 341 #define krp_sendhdrsymptom KREG_IBPORT_IDX(SendHdrErrSymptom) 342 #define krp_sendslid KREG_IBPORT_IDX(SendIBSLIDAssign) 343 #define krp_sendslidmask KREG_IBPORT_IDX(SendIBSLIDMask) 344 #define krp_ibsdtestiftx KREG_IBPORT_IDX(IB_SDTEST_IF_TX) 345 #define krp_adapt_dis_timer KREG_IBPORT_IDX(ADAPT_DISABLE_TIMER_THRESHOLD) 346 #define krp_tx_deemph_override KREG_IBPORT_IDX(IBSD_TX_DEEMPHASIS_OVERRIDE) 347 #define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl) 348 349 /* 350 * Per-context kernel registers. Access only with qib_read_kreg_ctxt() 351 * or qib_write_kreg_ctxt() 352 */ 353 #define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0) 354 #define krc_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0) 355 356 /* 357 * TID Flow table, per context. Reduces 358 * number of hdrq updates to one per flow (or on errors). 359 * context 0 and 1 share same memory, but have distinct 360 * addresses. Since for now, we never use expected sends 361 * on kernel contexts, we don't worry about that (we initialize 362 * those entries for ctxt 0/1 on driver load twice, for example). 363 */ 364 #define NUM_TIDFLOWS_CTXT 0x20 /* 0x20 per context; have to hardcode */ 365 #define ur_rcvflowtable (KREG_IDX(RcvTIDFlowTable0) - KREG_IDX(RcvHdrTail0)) 366 367 /* these are the error bits in the tid flows, and are W1C */ 368 #define TIDFLOW_ERRBITS ( \ 369 (SYM_MASK(RcvTIDFlowTable0, GenMismatch) << \ 370 SYM_LSB(RcvTIDFlowTable0, GenMismatch)) | \ 371 (SYM_MASK(RcvTIDFlowTable0, SeqMismatch) << \ 372 SYM_LSB(RcvTIDFlowTable0, SeqMismatch))) 373 374 /* Most (not all) Counters are per-IBport. 375 * Requires LBIntCnt is at offset 0 in the group 376 */ 377 #define CREG_IDX(regname) \ 378 ((QIB_7322_##regname##_0_OFFS - QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) 379 380 #define crp_badformat CREG_IDX(RxVersionErrCnt) 381 #define crp_err_rlen CREG_IDX(RxLenErrCnt) 382 #define crp_erricrc CREG_IDX(RxICRCErrCnt) 383 #define crp_errlink CREG_IDX(RxLinkMalformCnt) 384 #define crp_errlpcrc CREG_IDX(RxLPCRCErrCnt) 385 #define crp_errpkey CREG_IDX(RxPKeyMismatchCnt) 386 #define crp_errvcrc CREG_IDX(RxVCRCErrCnt) 387 #define crp_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt) 388 #define crp_iblinkdown CREG_IDX(IBLinkDownedCnt) 389 #define crp_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt) 390 #define crp_ibstatuschange CREG_IDX(IBStatusChangeCnt) 391 #define crp_ibsymbolerr CREG_IDX(IBSymbolErrCnt) 392 #define crp_invalidrlen CREG_IDX(RxMaxMinLenErrCnt) 393 #define crp_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt) 394 #define crp_pktrcv CREG_IDX(RxDataPktCnt) 395 #define crp_pktrcvflowctrl CREG_IDX(RxFlowPktCnt) 396 #define crp_pktsend CREG_IDX(TxDataPktCnt) 397 #define crp_pktsendflow CREG_IDX(TxFlowPktCnt) 398 #define crp_psrcvdatacount CREG_IDX(PSRcvDataCount) 399 #define crp_psrcvpktscount CREG_IDX(PSRcvPktsCount) 400 #define crp_psxmitdatacount CREG_IDX(PSXmitDataCount) 401 #define crp_psxmitpktscount CREG_IDX(PSXmitPktsCount) 402 #define crp_psxmitwaitcount CREG_IDX(PSXmitWaitCount) 403 #define crp_rcvebp CREG_IDX(RxEBPCnt) 404 #define crp_rcvflowctrlviol CREG_IDX(RxFlowCtrlViolCnt) 405 #define crp_rcvovfl CREG_IDX(RxBufOvflCnt) 406 #define crp_rxdlidfltr CREG_IDX(RxDlidFltrCnt) 407 #define crp_rxdroppkt CREG_IDX(RxDroppedPktCnt) 408 #define crp_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt) 409 #define crp_rxqpinvalidctxt CREG_IDX(RxQPInvalidContextCnt) 410 #define crp_rxvlerr CREG_IDX(RxVlErrCnt) 411 #define crp_sendstall CREG_IDX(TxFlowStallCnt) 412 #define crp_txdroppedpkt CREG_IDX(TxDroppedPktCnt) 413 #define crp_txhdrerr CREG_IDX(TxHeadersErrCnt) 414 #define crp_txlenerr CREG_IDX(TxLenErrCnt) 415 #define crp_txminmaxlenerr CREG_IDX(TxMaxMinLenErrCnt) 416 #define crp_txsdmadesc CREG_IDX(TxSDmaDescCnt) 417 #define crp_txunderrun CREG_IDX(TxUnderrunCnt) 418 #define crp_txunsupvl CREG_IDX(TxUnsupVLErrCnt) 419 #define crp_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt) 420 #define crp_wordrcv CREG_IDX(RxDwordCnt) 421 #define crp_wordsend CREG_IDX(TxDwordCnt) 422 #define crp_tx_creditstalls CREG_IDX(TxCreditUpToDateTimeOut) 423 424 /* these are the (few) counters that are not port-specific */ 425 #define CREG_DEVIDX(regname) ((QIB_7322_##regname##_OFFS - \ 426 QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) 427 #define cr_base_egrovfl CREG_DEVIDX(RxP0HdrEgrOvflCnt) 428 #define cr_lbint CREG_DEVIDX(LBIntCnt) 429 #define cr_lbstall CREG_DEVIDX(LBFlowStallCnt) 430 #define cr_pcieretrydiag CREG_DEVIDX(PcieRetryBufDiagQwordCnt) 431 #define cr_rxtidflowdrop CREG_DEVIDX(RxTidFlowDropCnt) 432 #define cr_tidfull CREG_DEVIDX(RxTIDFullErrCnt) 433 #define cr_tidinvalid CREG_DEVIDX(RxTIDValidErrCnt) 434 435 /* no chip register for # of IB ports supported, so define */ 436 #define NUM_IB_PORTS 2 437 438 /* 1 VL15 buffer per hardware IB port, no register for this, so define */ 439 #define NUM_VL15_BUFS NUM_IB_PORTS 440 441 /* 442 * context 0 and 1 are special, and there is no chip register that 443 * defines this value, so we have to define it here. 444 * These are all allocated to either 0 or 1 for single port 445 * hardware configuration, otherwise each gets half 446 */ 447 #define KCTXT0_EGRCNT 2048 448 449 /* values for vl and port fields in PBC, 7322-specific */ 450 #define PBC_PORT_SEL_LSB 26 451 #define PBC_PORT_SEL_RMASK 1 452 #define PBC_VL_NUM_LSB 27 453 #define PBC_VL_NUM_RMASK 7 454 #define PBC_7322_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */ 455 #define PBC_7322_VL15_SEND_CTRL (1ULL << 31) /* control version of same */ 456 457 static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { 458 [IB_RATE_2_5_GBPS] = 16, 459 [IB_RATE_5_GBPS] = 8, 460 [IB_RATE_10_GBPS] = 4, 461 [IB_RATE_20_GBPS] = 2, 462 [IB_RATE_30_GBPS] = 2, 463 [IB_RATE_40_GBPS] = 1 464 }; 465 466 #define IBA7322_LINKSPEED_SHIFT SYM_LSB(IBCStatusA_0, LinkSpeedActive) 467 #define IBA7322_LINKWIDTH_SHIFT SYM_LSB(IBCStatusA_0, LinkWidthActive) 468 469 /* link training states, from IBC */ 470 #define IB_7322_LT_STATE_DISABLED 0x00 471 #define IB_7322_LT_STATE_LINKUP 0x01 472 #define IB_7322_LT_STATE_POLLACTIVE 0x02 473 #define IB_7322_LT_STATE_POLLQUIET 0x03 474 #define IB_7322_LT_STATE_SLEEPDELAY 0x04 475 #define IB_7322_LT_STATE_SLEEPQUIET 0x05 476 #define IB_7322_LT_STATE_CFGDEBOUNCE 0x08 477 #define IB_7322_LT_STATE_CFGRCVFCFG 0x09 478 #define IB_7322_LT_STATE_CFGWAITRMT 0x0a 479 #define IB_7322_LT_STATE_CFGIDLE 0x0b 480 #define IB_7322_LT_STATE_RECOVERRETRAIN 0x0c 481 #define IB_7322_LT_STATE_TXREVLANES 0x0d 482 #define IB_7322_LT_STATE_RECOVERWAITRMT 0x0e 483 #define IB_7322_LT_STATE_RECOVERIDLE 0x0f 484 #define IB_7322_LT_STATE_CFGENH 0x10 485 #define IB_7322_LT_STATE_CFGTEST 0x11 486 #define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12 487 #define IB_7322_LT_STATE_CFGWAITENH 0x13 488 489 /* link state machine states from IBC */ 490 #define IB_7322_L_STATE_DOWN 0x0 491 #define IB_7322_L_STATE_INIT 0x1 492 #define IB_7322_L_STATE_ARM 0x2 493 #define IB_7322_L_STATE_ACTIVE 0x3 494 #define IB_7322_L_STATE_ACT_DEFER 0x4 495 496 static const u8 qib_7322_physportstate[0x20] = { 497 [IB_7322_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, 498 [IB_7322_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, 499 [IB_7322_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, 500 [IB_7322_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, 501 [IB_7322_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, 502 [IB_7322_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, 503 [IB_7322_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN, 504 [IB_7322_LT_STATE_CFGRCVFCFG] = 505 IB_PHYSPORTSTATE_CFG_TRAIN, 506 [IB_7322_LT_STATE_CFGWAITRMT] = 507 IB_PHYSPORTSTATE_CFG_TRAIN, 508 [IB_7322_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_IDLE, 509 [IB_7322_LT_STATE_RECOVERRETRAIN] = 510 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 511 [IB_7322_LT_STATE_RECOVERWAITRMT] = 512 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 513 [IB_7322_LT_STATE_RECOVERIDLE] = 514 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 515 [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH, 516 [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN, 517 [IB_7322_LT_STATE_CFGWAITRMTTEST] = 518 IB_PHYSPORTSTATE_CFG_TRAIN, 519 [IB_7322_LT_STATE_CFGWAITENH] = 520 IB_PHYSPORTSTATE_CFG_WAIT_ENH, 521 [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, 522 [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, 523 [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, 524 [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN 525 }; 526 527 #ifdef CONFIG_INFINIBAND_QIB_DCA 528 struct qib_irq_notify { 529 int rcv; 530 void *arg; 531 struct irq_affinity_notify notify; 532 }; 533 #endif 534 535 struct qib_chip_specific { 536 u64 __iomem *cregbase; 537 u64 *cntrs; 538 spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */ 539 spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */ 540 u64 main_int_mask; /* clear bits which have dedicated handlers */ 541 u64 int_enable_mask; /* for per port interrupts in single port mode */ 542 u64 errormask; 543 u64 hwerrmask; 544 u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */ 545 u64 gpio_mask; /* shadow the gpio mask register */ 546 u64 extctrl; /* shadow the gpio output enable, etc... */ 547 u32 ncntrs; 548 u32 nportcntrs; 549 u32 cntrnamelen; 550 u32 portcntrnamelen; 551 u32 numctxts; 552 u32 rcvegrcnt; 553 u32 updthresh; /* current AvailUpdThld */ 554 u32 updthresh_dflt; /* default AvailUpdThld */ 555 u32 r1; 556 int irq; 557 u32 num_msix_entries; 558 u32 sdmabufcnt; 559 u32 lastbuf_for_pio; 560 u32 stay_in_freeze; 561 u32 recovery_ports_initted; 562 #ifdef CONFIG_INFINIBAND_QIB_DCA 563 u32 dca_ctrl; 564 int rhdr_cpu[18]; 565 int sdma_cpu[2]; 566 u64 dca_rcvhdr_ctrl[5]; /* B, C, D, E, F */ 567 #endif 568 struct qib_msix_entry *msix_entries; 569 unsigned long *sendchkenable; 570 unsigned long *sendgrhchk; 571 unsigned long *sendibchk; 572 u32 rcvavail_timeout[18]; 573 char emsgbuf[128]; /* for device error interrupt msg buffer */ 574 }; 575 576 /* Table of entries in "human readable" form Tx Emphasis. */ 577 struct txdds_ent { 578 u8 amp; 579 u8 pre; 580 u8 main; 581 u8 post; 582 }; 583 584 struct vendor_txdds_ent { 585 u8 oui[QSFP_VOUI_LEN]; 586 u8 *partnum; 587 struct txdds_ent sdr; 588 struct txdds_ent ddr; 589 struct txdds_ent qdr; 590 }; 591 592 static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *); 593 594 #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */ 595 #define TXDDS_EXTRA_SZ 18 /* number of extra tx settings entries */ 596 #define TXDDS_MFG_SZ 2 /* number of mfg tx settings entries */ 597 #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */ 598 599 #define H1_FORCE_VAL 8 600 #define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */ 601 #define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */ 602 603 /* The static and dynamic registers are paired, and the pairs indexed by spd */ 604 #define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \ 605 + ((spd) * 2)) 606 607 #define QDR_DFE_DISABLE_DELAY 4000 /* msec after LINKUP */ 608 #define QDR_STATIC_ADAPT_DOWN 0xf0f0f0f0ULL /* link down, H1-H4 QDR adapts */ 609 #define QDR_STATIC_ADAPT_DOWN_R1 0ULL /* r1 link down, H1-H4 QDR adapts */ 610 #define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */ 611 #define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */ 612 613 struct qib_chippport_specific { 614 u64 __iomem *kpregbase; 615 u64 __iomem *cpregbase; 616 u64 *portcntrs; 617 struct qib_pportdata *ppd; 618 wait_queue_head_t autoneg_wait; 619 struct delayed_work autoneg_work; 620 struct delayed_work ipg_work; 621 struct timer_list chase_timer; 622 /* 623 * these 5 fields are used to establish deltas for IB symbol 624 * errors and linkrecovery errors. They can be reported on 625 * some chips during link negotiation prior to INIT, and with 626 * DDR when faking DDR negotiations with non-IBTA switches. 627 * The chip counters are adjusted at driver unload if there is 628 * a non-zero delta. 629 */ 630 u64 ibdeltainprog; 631 u64 ibsymdelta; 632 u64 ibsymsnap; 633 u64 iblnkerrdelta; 634 u64 iblnkerrsnap; 635 u64 iblnkdownsnap; 636 u64 iblnkdowndelta; 637 u64 ibmalfdelta; 638 u64 ibmalfsnap; 639 u64 ibcctrl_a; /* krp_ibcctrl_a shadow */ 640 u64 ibcctrl_b; /* krp_ibcctrl_b shadow */ 641 unsigned long qdr_dfe_time; 642 unsigned long chase_end; 643 u32 autoneg_tries; 644 u32 recovery_init; 645 u32 qdr_dfe_on; 646 u32 qdr_reforce; 647 /* 648 * Per-bay per-channel rcv QMH H1 values and Tx values for QDR. 649 * entry zero is unused, to simplify indexing 650 */ 651 u8 h1_val; 652 u8 no_eep; /* txselect table index to use if no qsfp info */ 653 u8 ipg_tries; 654 u8 ibmalfusesnap; 655 struct qib_qsfp_data qsfp_data; 656 char epmsgbuf[192]; /* for port error interrupt msg buffer */ 657 char sdmamsgbuf[192]; /* for per-port sdma error messages */ 658 }; 659 660 static struct { 661 const char *name; 662 irq_handler_t handler; 663 int lsb; 664 int port; /* 0 if not port-specific, else port # */ 665 int dca; 666 } irq_table[] = { 667 { "", qib_7322intr, -1, 0, 0 }, 668 { " (buf avail)", qib_7322bufavail, 669 SYM_LSB(IntStatus, SendBufAvail), 0, 0}, 670 { " (sdma 0)", sdma_intr, 671 SYM_LSB(IntStatus, SDmaInt_0), 1, 1 }, 672 { " (sdma 1)", sdma_intr, 673 SYM_LSB(IntStatus, SDmaInt_1), 2, 1 }, 674 { " (sdmaI 0)", sdma_idle_intr, 675 SYM_LSB(IntStatus, SDmaIdleInt_0), 1, 1}, 676 { " (sdmaI 1)", sdma_idle_intr, 677 SYM_LSB(IntStatus, SDmaIdleInt_1), 2, 1}, 678 { " (sdmaP 0)", sdma_progress_intr, 679 SYM_LSB(IntStatus, SDmaProgressInt_0), 1, 1 }, 680 { " (sdmaP 1)", sdma_progress_intr, 681 SYM_LSB(IntStatus, SDmaProgressInt_1), 2, 1 }, 682 { " (sdmaC 0)", sdma_cleanup_intr, 683 SYM_LSB(IntStatus, SDmaCleanupDone_0), 1, 0 }, 684 { " (sdmaC 1)", sdma_cleanup_intr, 685 SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 , 0}, 686 }; 687 688 #ifdef CONFIG_INFINIBAND_QIB_DCA 689 690 static const struct dca_reg_map { 691 int shadow_inx; 692 int lsb; 693 u64 mask; 694 u16 regno; 695 } dca_rcvhdr_reg_map[] = { 696 { 0, SYM_LSB(DCACtrlB, RcvHdrq0DCAOPH), 697 ~SYM_MASK(DCACtrlB, RcvHdrq0DCAOPH) , KREG_IDX(DCACtrlB) }, 698 { 0, SYM_LSB(DCACtrlB, RcvHdrq1DCAOPH), 699 ~SYM_MASK(DCACtrlB, RcvHdrq1DCAOPH) , KREG_IDX(DCACtrlB) }, 700 { 0, SYM_LSB(DCACtrlB, RcvHdrq2DCAOPH), 701 ~SYM_MASK(DCACtrlB, RcvHdrq2DCAOPH) , KREG_IDX(DCACtrlB) }, 702 { 0, SYM_LSB(DCACtrlB, RcvHdrq3DCAOPH), 703 ~SYM_MASK(DCACtrlB, RcvHdrq3DCAOPH) , KREG_IDX(DCACtrlB) }, 704 { 1, SYM_LSB(DCACtrlC, RcvHdrq4DCAOPH), 705 ~SYM_MASK(DCACtrlC, RcvHdrq4DCAOPH) , KREG_IDX(DCACtrlC) }, 706 { 1, SYM_LSB(DCACtrlC, RcvHdrq5DCAOPH), 707 ~SYM_MASK(DCACtrlC, RcvHdrq5DCAOPH) , KREG_IDX(DCACtrlC) }, 708 { 1, SYM_LSB(DCACtrlC, RcvHdrq6DCAOPH), 709 ~SYM_MASK(DCACtrlC, RcvHdrq6DCAOPH) , KREG_IDX(DCACtrlC) }, 710 { 1, SYM_LSB(DCACtrlC, RcvHdrq7DCAOPH), 711 ~SYM_MASK(DCACtrlC, RcvHdrq7DCAOPH) , KREG_IDX(DCACtrlC) }, 712 { 2, SYM_LSB(DCACtrlD, RcvHdrq8DCAOPH), 713 ~SYM_MASK(DCACtrlD, RcvHdrq8DCAOPH) , KREG_IDX(DCACtrlD) }, 714 { 2, SYM_LSB(DCACtrlD, RcvHdrq9DCAOPH), 715 ~SYM_MASK(DCACtrlD, RcvHdrq9DCAOPH) , KREG_IDX(DCACtrlD) }, 716 { 2, SYM_LSB(DCACtrlD, RcvHdrq10DCAOPH), 717 ~SYM_MASK(DCACtrlD, RcvHdrq10DCAOPH) , KREG_IDX(DCACtrlD) }, 718 { 2, SYM_LSB(DCACtrlD, RcvHdrq11DCAOPH), 719 ~SYM_MASK(DCACtrlD, RcvHdrq11DCAOPH) , KREG_IDX(DCACtrlD) }, 720 { 3, SYM_LSB(DCACtrlE, RcvHdrq12DCAOPH), 721 ~SYM_MASK(DCACtrlE, RcvHdrq12DCAOPH) , KREG_IDX(DCACtrlE) }, 722 { 3, SYM_LSB(DCACtrlE, RcvHdrq13DCAOPH), 723 ~SYM_MASK(DCACtrlE, RcvHdrq13DCAOPH) , KREG_IDX(DCACtrlE) }, 724 { 3, SYM_LSB(DCACtrlE, RcvHdrq14DCAOPH), 725 ~SYM_MASK(DCACtrlE, RcvHdrq14DCAOPH) , KREG_IDX(DCACtrlE) }, 726 { 3, SYM_LSB(DCACtrlE, RcvHdrq15DCAOPH), 727 ~SYM_MASK(DCACtrlE, RcvHdrq15DCAOPH) , KREG_IDX(DCACtrlE) }, 728 { 4, SYM_LSB(DCACtrlF, RcvHdrq16DCAOPH), 729 ~SYM_MASK(DCACtrlF, RcvHdrq16DCAOPH) , KREG_IDX(DCACtrlF) }, 730 { 4, SYM_LSB(DCACtrlF, RcvHdrq17DCAOPH), 731 ~SYM_MASK(DCACtrlF, RcvHdrq17DCAOPH) , KREG_IDX(DCACtrlF) }, 732 }; 733 #endif 734 735 /* ibcctrl bits */ 736 #define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1 737 /* cycle through TS1/TS2 till OK */ 738 #define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2 739 /* wait for TS1, then go on */ 740 #define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3 741 #define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16 742 743 #define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ 744 #define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ 745 #define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ 746 747 #define BLOB_7322_IBCHG 0x101 748 749 static inline void qib_write_kreg(const struct qib_devdata *dd, 750 const u32 regno, u64 value); 751 static inline u32 qib_read_kreg32(const struct qib_devdata *, const u32); 752 static void write_7322_initregs(struct qib_devdata *); 753 static void write_7322_init_portregs(struct qib_pportdata *); 754 static void setup_7322_link_recovery(struct qib_pportdata *, u32); 755 static void check_7322_rxe_status(struct qib_pportdata *); 756 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *); 757 #ifdef CONFIG_INFINIBAND_QIB_DCA 758 static void qib_setup_dca(struct qib_devdata *dd); 759 static void setup_dca_notifier(struct qib_devdata *dd, 760 struct qib_msix_entry *m); 761 static void reset_dca_notifier(struct qib_devdata *dd, 762 struct qib_msix_entry *m); 763 #endif 764 765 /** 766 * qib_read_ureg32 - read 32-bit virtualized per-context register 767 * @dd: device 768 * @regno: register number 769 * @ctxt: context number 770 * 771 * Return the contents of a register that is virtualized to be per context. 772 * Returns -1 on errors (not distinguishable from valid contents at 773 * runtime; we may add a separate error variable at some point). 774 */ 775 static inline u32 qib_read_ureg32(const struct qib_devdata *dd, 776 enum qib_ureg regno, int ctxt) 777 { 778 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 779 return 0; 780 return readl(regno + (u64 __iomem *)( 781 (dd->ureg_align * ctxt) + (dd->userbase ? 782 (char __iomem *)dd->userbase : 783 (char __iomem *)dd->kregbase + dd->uregbase))); 784 } 785 786 /** 787 * qib_read_ureg - read virtualized per-context register 788 * @dd: device 789 * @regno: register number 790 * @ctxt: context number 791 * 792 * Return the contents of a register that is virtualized to be per context. 793 * Returns -1 on errors (not distinguishable from valid contents at 794 * runtime; we may add a separate error variable at some point). 795 */ 796 static inline u64 qib_read_ureg(const struct qib_devdata *dd, 797 enum qib_ureg regno, int ctxt) 798 { 799 800 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 801 return 0; 802 return readq(regno + (u64 __iomem *)( 803 (dd->ureg_align * ctxt) + (dd->userbase ? 804 (char __iomem *)dd->userbase : 805 (char __iomem *)dd->kregbase + dd->uregbase))); 806 } 807 808 /** 809 * qib_write_ureg - write virtualized per-context register 810 * @dd: device 811 * @regno: register number 812 * @value: value 813 * @ctxt: context 814 * 815 * Write the contents of a register that is virtualized to be per context. 816 */ 817 static inline void qib_write_ureg(const struct qib_devdata *dd, 818 enum qib_ureg regno, u64 value, int ctxt) 819 { 820 u64 __iomem *ubase; 821 822 if (dd->userbase) 823 ubase = (u64 __iomem *) 824 ((char __iomem *) dd->userbase + 825 dd->ureg_align * ctxt); 826 else 827 ubase = (u64 __iomem *) 828 (dd->uregbase + 829 (char __iomem *) dd->kregbase + 830 dd->ureg_align * ctxt); 831 832 if (dd->kregbase && (dd->flags & QIB_PRESENT)) 833 writeq(value, &ubase[regno]); 834 } 835 836 static inline u32 qib_read_kreg32(const struct qib_devdata *dd, 837 const u32 regno) 838 { 839 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 840 return -1; 841 return readl((u32 __iomem *) &dd->kregbase[regno]); 842 } 843 844 static inline u64 qib_read_kreg64(const struct qib_devdata *dd, 845 const u32 regno) 846 { 847 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 848 return -1; 849 return readq(&dd->kregbase[regno]); 850 } 851 852 static inline void qib_write_kreg(const struct qib_devdata *dd, 853 const u32 regno, u64 value) 854 { 855 if (dd->kregbase && (dd->flags & QIB_PRESENT)) 856 writeq(value, &dd->kregbase[regno]); 857 } 858 859 /* 860 * not many sanity checks for the port-specific kernel register routines, 861 * since they are only used when it's known to be safe. 862 */ 863 static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd, 864 const u16 regno) 865 { 866 if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT)) 867 return 0ULL; 868 return readq(&ppd->cpspec->kpregbase[regno]); 869 } 870 871 static inline void qib_write_kreg_port(const struct qib_pportdata *ppd, 872 const u16 regno, u64 value) 873 { 874 if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase && 875 (ppd->dd->flags & QIB_PRESENT)) 876 writeq(value, &ppd->cpspec->kpregbase[regno]); 877 } 878 879 /** 880 * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register 881 * @dd: the qlogic_ib device 882 * @regno: the register number to write 883 * @ctxt: the context containing the register 884 * @value: the value to write 885 */ 886 static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, 887 const u16 regno, unsigned ctxt, 888 u64 value) 889 { 890 qib_write_kreg(dd, regno + ctxt, value); 891 } 892 893 static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno) 894 { 895 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) 896 return 0; 897 return readq(&dd->cspec->cregbase[regno]); 898 899 900 } 901 902 static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno) 903 { 904 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) 905 return 0; 906 return readl(&dd->cspec->cregbase[regno]); 907 908 909 } 910 911 static inline void write_7322_creg_port(const struct qib_pportdata *ppd, 912 u16 regno, u64 value) 913 { 914 if (ppd->cpspec && ppd->cpspec->cpregbase && 915 (ppd->dd->flags & QIB_PRESENT)) 916 writeq(value, &ppd->cpspec->cpregbase[regno]); 917 } 918 919 static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd, 920 u16 regno) 921 { 922 if (!ppd->cpspec || !ppd->cpspec->cpregbase || 923 !(ppd->dd->flags & QIB_PRESENT)) 924 return 0; 925 return readq(&ppd->cpspec->cpregbase[regno]); 926 } 927 928 static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd, 929 u16 regno) 930 { 931 if (!ppd->cpspec || !ppd->cpspec->cpregbase || 932 !(ppd->dd->flags & QIB_PRESENT)) 933 return 0; 934 return readl(&ppd->cpspec->cpregbase[regno]); 935 } 936 937 /* bits in Control register */ 938 #define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset) 939 #define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn) 940 941 /* bits in general interrupt regs */ 942 #define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask) 943 #define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17) 944 #define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB) 945 #define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask) 946 #define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17) 947 #define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB) 948 #define QIB_I_C_ERROR INT_MASK(Err) 949 950 #define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1)) 951 #define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail) 952 #define QIB_I_GPIO INT_MASK(AssertGPIO) 953 #define QIB_I_P_SDMAINT(pidx) \ 954 (INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ 955 INT_MASK_P(SDmaProgress, pidx) | \ 956 INT_MASK_PM(SDmaCleanupDone, pidx)) 957 958 /* Interrupt bits that are "per port" */ 959 #define QIB_I_P_BITSEXTANT(pidx) \ 960 (INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \ 961 INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ 962 INT_MASK_P(SDmaProgress, pidx) | \ 963 INT_MASK_PM(SDmaCleanupDone, pidx)) 964 965 /* Interrupt bits that are common to a device */ 966 /* currently unused: QIB_I_SPIOSENT */ 967 #define QIB_I_C_BITSEXTANT \ 968 (QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \ 969 QIB_I_SPIOSENT | \ 970 QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO) 971 972 #define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \ 973 QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1)) 974 975 /* 976 * Error bits that are "per port". 977 */ 978 #define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged) 979 #define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr) 980 #define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr) 981 #define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr) 982 #define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr) 983 #define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr) 984 #define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr) 985 #define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr) 986 #define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr) 987 #define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr) 988 #define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr) 989 #define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr) 990 #define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr) 991 #define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr) 992 #define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr) 993 #define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr) 994 #define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr) 995 #define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr) 996 #define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr) 997 #define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr) 998 #define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr) 999 #define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr) 1000 #define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr) 1001 #define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr) 1002 #define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr) 1003 #define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr) 1004 #define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr) 1005 #define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr) 1006 1007 #define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr) 1008 #define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr) 1009 #define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr) 1010 #define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr) 1011 #define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr) 1012 #define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr) 1013 #define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr) 1014 #define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr) 1015 #define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr) 1016 #define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr) 1017 #define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr) 1018 1019 /* Error bits that are common to a device */ 1020 #define QIB_E_RESET ERR_MASK(ResetNegated) 1021 #define QIB_E_HARDWARE ERR_MASK(HardwareErr) 1022 #define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr) 1023 1024 1025 /* 1026 * Per chip (rather than per-port) errors. Most either do 1027 * nothing but trigger a print (because they self-recover, or 1028 * always occur in tandem with other errors that handle the 1029 * issue), or because they indicate errors with no recovery, 1030 * but we want to know that they happened. 1031 */ 1032 #define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr) 1033 #define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd) 1034 #define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr) 1035 #define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr) 1036 #define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr) 1037 #define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr) 1038 #define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr) 1039 #define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr) 1040 1041 /* SDMA chip errors (not per port) 1042 * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get 1043 * the SDMAHALT error immediately, so we just print the dup error via the 1044 * E_AUTO mechanism. This is true of most of the per-port fatal errors 1045 * as well, but since this is port-independent, by definition, it's 1046 * handled a bit differently. SDMA_VL15 and SDMA_WRONG_PORT are per 1047 * packet send errors, and so are handled in the same manner as other 1048 * per-packet errors. 1049 */ 1050 #define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err) 1051 #define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr) 1052 #define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr) 1053 1054 /* 1055 * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS 1056 * it is used to print "common" packet errors. 1057 */ 1058 #define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\ 1059 QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\ 1060 QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\ 1061 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ 1062 QIB_E_P_REBP) 1063 1064 /* Error Bits that Packet-related (Receive, per-port) */ 1065 #define QIB_E_P_RPKTERRS (\ 1066 QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \ 1067 QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \ 1068 QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\ 1069 QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \ 1070 QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \ 1071 QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP) 1072 1073 /* 1074 * Error bits that are Send-related (per port) 1075 * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling). 1076 * All of these potentially need to have a buffer disarmed 1077 */ 1078 #define QIB_E_P_SPKTERRS (\ 1079 QIB_E_P_SUNEXP_PKTNUM |\ 1080 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ 1081 QIB_E_P_SMAXPKTLEN |\ 1082 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ 1083 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \ 1084 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL) 1085 1086 #define QIB_E_SPKTERRS ( \ 1087 QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \ 1088 ERR_MASK_N(SendUnsupportedVLErr) | \ 1089 QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT) 1090 1091 #define QIB_E_P_SDMAERRS ( \ 1092 QIB_E_P_SDMAHALT | \ 1093 QIB_E_P_SDMADESCADDRMISALIGN | \ 1094 QIB_E_P_SDMAUNEXPDATA | \ 1095 QIB_E_P_SDMAMISSINGDW | \ 1096 QIB_E_P_SDMADWEN | \ 1097 QIB_E_P_SDMARPYTAG | \ 1098 QIB_E_P_SDMA1STDESC | \ 1099 QIB_E_P_SDMABASE | \ 1100 QIB_E_P_SDMATAILOUTOFBOUND | \ 1101 QIB_E_P_SDMAOUTOFBOUND | \ 1102 QIB_E_P_SDMAGENMISMATCH) 1103 1104 /* 1105 * This sets some bits more than once, but makes it more obvious which 1106 * bits are not handled under other categories, and the repeat definition 1107 * is not a problem. 1108 */ 1109 #define QIB_E_P_BITSEXTANT ( \ 1110 QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \ 1111 QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \ 1112 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \ 1113 QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \ 1114 ) 1115 1116 /* 1117 * These are errors that can occur when the link 1118 * changes state while a packet is being sent or received. This doesn't 1119 * cover things like EBP or VCRC that can be the result of a sending 1120 * having the link change state, so we receive a "known bad" packet. 1121 * All of these are "per port", so renamed: 1122 */ 1123 #define QIB_E_P_LINK_PKTERRS (\ 1124 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ 1125 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\ 1126 QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\ 1127 QIB_E_P_RUNEXPCHAR) 1128 1129 /* 1130 * This sets some bits more than once, but makes it more obvious which 1131 * bits are not handled under other categories (such as QIB_E_SPKTERRS), 1132 * and the repeat definition is not a problem. 1133 */ 1134 #define QIB_E_C_BITSEXTANT (\ 1135 QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\ 1136 QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\ 1137 QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE) 1138 1139 /* Likewise Neuter E_SPKT_ERRS_IGNORE */ 1140 #define E_SPKT_ERRS_IGNORE 0 1141 1142 #define QIB_EXTS_MEMBIST_DISABLED \ 1143 SYM_MASK(EXTStatus, MemBISTDisabled) 1144 #define QIB_EXTS_MEMBIST_ENDTEST \ 1145 SYM_MASK(EXTStatus, MemBISTEndTest) 1146 1147 #define QIB_E_SPIOARMLAUNCH \ 1148 ERR_MASK(SendArmLaunchErr) 1149 1150 #define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd) 1151 #define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd) 1152 1153 /* 1154 * IBTA_1_2 is set when multiple speeds are enabled (normal), 1155 * and also if forced QDR (only QDR enabled). It's enabled for the 1156 * forced QDR case so that scrambling will be enabled by the TS3 1157 * exchange, when supported by both sides of the link. 1158 */ 1159 #define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE) 1160 #define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED) 1161 #define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR) 1162 #define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) 1163 #define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) 1164 #define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \ 1165 SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)) 1166 #define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR) 1167 1168 #define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod) 1169 #define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod) 1170 1171 #define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS) 1172 #define IBA7322_IBC_WIDTH_4X_ONLY (1<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) 1173 #define IBA7322_IBC_WIDTH_1X_ONLY (0<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) 1174 1175 #define IBA7322_IBC_RXPOL_MASK SYM_MASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP) 1176 #define IBA7322_IBC_RXPOL_LSB SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP) 1177 #define IBA7322_IBC_HRTBT_MASK (SYM_MASK(IBCCtrlB_0, HRTBT_AUTO) | \ 1178 SYM_MASK(IBCCtrlB_0, HRTBT_ENB)) 1179 #define IBA7322_IBC_HRTBT_RMASK (IBA7322_IBC_HRTBT_MASK >> \ 1180 SYM_LSB(IBCCtrlB_0, HRTBT_ENB)) 1181 #define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB) 1182 1183 #define IBA7322_REDIRECT_VEC_PER_REG 12 1184 1185 #define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En) 1186 #define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En) 1187 #define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En) 1188 #define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En) 1189 #define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En) 1190 1191 #define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */ 1192 1193 #define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \ 1194 .msg = #fldname , .sz = sizeof(#fldname) } 1195 #define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \ 1196 fldname##Mask##_##port), .msg = #fldname , .sz = sizeof(#fldname) } 1197 static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = { 1198 HWE_AUTO_P(IBSerdesPClkNotDetect, 1), 1199 HWE_AUTO_P(IBSerdesPClkNotDetect, 0), 1200 HWE_AUTO(PCIESerdesPClkNotDetect), 1201 HWE_AUTO(PowerOnBISTFailed), 1202 HWE_AUTO(TempsenseTholdReached), 1203 HWE_AUTO(MemoryErr), 1204 HWE_AUTO(PCIeBusParityErr), 1205 HWE_AUTO(PcieCplTimeout), 1206 HWE_AUTO(PciePoisonedTLP), 1207 HWE_AUTO_P(SDmaMemReadErr, 1), 1208 HWE_AUTO_P(SDmaMemReadErr, 0), 1209 HWE_AUTO_P(IBCBusFromSPCParityErr, 1), 1210 HWE_AUTO_P(IBCBusToSPCParityErr, 1), 1211 HWE_AUTO_P(IBCBusFromSPCParityErr, 0), 1212 HWE_AUTO(statusValidNoEop), 1213 HWE_AUTO(LATriggered), 1214 { .mask = 0, .sz = 0 } 1215 }; 1216 1217 #define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \ 1218 .msg = #fldname, .sz = sizeof(#fldname) } 1219 #define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \ 1220 .msg = #fldname, .sz = sizeof(#fldname) } 1221 static const struct qib_hwerror_msgs qib_7322error_msgs[] = { 1222 E_AUTO(RcvEgrFullErr), 1223 E_AUTO(RcvHdrFullErr), 1224 E_AUTO(ResetNegated), 1225 E_AUTO(HardwareErr), 1226 E_AUTO(InvalidAddrErr), 1227 E_AUTO(SDmaVL15Err), 1228 E_AUTO(SBufVL15MisUseErr), 1229 E_AUTO(InvalidEEPCmd), 1230 E_AUTO(RcvContextShareErr), 1231 E_AUTO(SendVLMismatchErr), 1232 E_AUTO(SendArmLaunchErr), 1233 E_AUTO(SendSpecialTriggerErr), 1234 E_AUTO(SDmaWrongPortErr), 1235 E_AUTO(SDmaBufMaskDuplicateErr), 1236 { .mask = 0, .sz = 0 } 1237 }; 1238 1239 static const struct qib_hwerror_msgs qib_7322p_error_msgs[] = { 1240 E_P_AUTO(IBStatusChanged), 1241 E_P_AUTO(SHeadersErr), 1242 E_P_AUTO(VL15BufMisuseErr), 1243 /* 1244 * SDmaHaltErr is not really an error, make it clearer; 1245 */ 1246 {.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted", 1247 .sz = 11}, 1248 E_P_AUTO(SDmaDescAddrMisalignErr), 1249 E_P_AUTO(SDmaUnexpDataErr), 1250 E_P_AUTO(SDmaMissingDwErr), 1251 E_P_AUTO(SDmaDwEnErr), 1252 E_P_AUTO(SDmaRpyTagErr), 1253 E_P_AUTO(SDma1stDescErr), 1254 E_P_AUTO(SDmaBaseErr), 1255 E_P_AUTO(SDmaTailOutOfBoundErr), 1256 E_P_AUTO(SDmaOutOfBoundErr), 1257 E_P_AUTO(SDmaGenMismatchErr), 1258 E_P_AUTO(SendBufMisuseErr), 1259 E_P_AUTO(SendUnsupportedVLErr), 1260 E_P_AUTO(SendUnexpectedPktNumErr), 1261 E_P_AUTO(SendDroppedDataPktErr), 1262 E_P_AUTO(SendDroppedSmpPktErr), 1263 E_P_AUTO(SendPktLenErr), 1264 E_P_AUTO(SendUnderRunErr), 1265 E_P_AUTO(SendMaxPktLenErr), 1266 E_P_AUTO(SendMinPktLenErr), 1267 E_P_AUTO(RcvIBLostLinkErr), 1268 E_P_AUTO(RcvHdrErr), 1269 E_P_AUTO(RcvHdrLenErr), 1270 E_P_AUTO(RcvBadTidErr), 1271 E_P_AUTO(RcvBadVersionErr), 1272 E_P_AUTO(RcvIBFlowErr), 1273 E_P_AUTO(RcvEBPErr), 1274 E_P_AUTO(RcvUnsupportedVLErr), 1275 E_P_AUTO(RcvUnexpectedCharErr), 1276 E_P_AUTO(RcvShortPktLenErr), 1277 E_P_AUTO(RcvLongPktLenErr), 1278 E_P_AUTO(RcvMaxPktLenErr), 1279 E_P_AUTO(RcvMinPktLenErr), 1280 E_P_AUTO(RcvICRCErr), 1281 E_P_AUTO(RcvVCRCErr), 1282 E_P_AUTO(RcvFormatErr), 1283 { .mask = 0, .sz = 0 } 1284 }; 1285 1286 /* 1287 * Below generates "auto-message" for interrupts not specific to any port or 1288 * context 1289 */ 1290 #define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \ 1291 .msg = #fldname, .sz = sizeof(#fldname) } 1292 /* Below generates "auto-message" for interrupts specific to a port */ 1293 #define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\ 1294 SYM_LSB(IntMask, fldname##Mask##_0), \ 1295 SYM_LSB(IntMask, fldname##Mask##_1)), \ 1296 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } 1297 /* For some reason, the SerDesTrimDone bits are reversed */ 1298 #define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\ 1299 SYM_LSB(IntMask, fldname##Mask##_1), \ 1300 SYM_LSB(IntMask, fldname##Mask##_0)), \ 1301 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } 1302 /* 1303 * Below generates "auto-message" for interrupts specific to a context, 1304 * with ctxt-number appended 1305 */ 1306 #define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\ 1307 SYM_LSB(IntMask, fldname##0IntMask), \ 1308 SYM_LSB(IntMask, fldname##17IntMask)), \ 1309 .msg = #fldname "_C", .sz = sizeof(#fldname "_C") } 1310 1311 static const struct qib_hwerror_msgs qib_7322_intr_msgs[] = { 1312 INTR_AUTO_P(SDmaInt), 1313 INTR_AUTO_P(SDmaProgressInt), 1314 INTR_AUTO_P(SDmaIdleInt), 1315 INTR_AUTO_P(SDmaCleanupDone), 1316 INTR_AUTO_C(RcvUrg), 1317 INTR_AUTO_P(ErrInt), 1318 INTR_AUTO(ErrInt), /* non-port-specific errs */ 1319 INTR_AUTO(AssertGPIOInt), 1320 INTR_AUTO_P(SendDoneInt), 1321 INTR_AUTO(SendBufAvailInt), 1322 INTR_AUTO_C(RcvAvail), 1323 { .mask = 0, .sz = 0 } 1324 }; 1325 1326 #define TXSYMPTOM_AUTO_P(fldname) \ 1327 { .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), \ 1328 .msg = #fldname, .sz = sizeof(#fldname) } 1329 static const struct qib_hwerror_msgs hdrchk_msgs[] = { 1330 TXSYMPTOM_AUTO_P(NonKeyPacket), 1331 TXSYMPTOM_AUTO_P(GRHFail), 1332 TXSYMPTOM_AUTO_P(PkeyFail), 1333 TXSYMPTOM_AUTO_P(QPFail), 1334 TXSYMPTOM_AUTO_P(SLIDFail), 1335 TXSYMPTOM_AUTO_P(RawIPV6), 1336 TXSYMPTOM_AUTO_P(PacketTooSmall), 1337 { .mask = 0, .sz = 0 } 1338 }; 1339 1340 #define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */ 1341 1342 /* 1343 * Called when we might have an error that is specific to a particular 1344 * PIO buffer, and may need to cancel that buffer, so it can be re-used, 1345 * because we don't need to force the update of pioavail 1346 */ 1347 static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd) 1348 { 1349 struct qib_devdata *dd = ppd->dd; 1350 u32 i; 1351 int any; 1352 u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 1353 u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG; 1354 unsigned long sbuf[4]; 1355 1356 /* 1357 * It's possible that sendbuffererror could have bits set; might 1358 * have already done this as a result of hardware error handling. 1359 */ 1360 any = 0; 1361 for (i = 0; i < regcnt; ++i) { 1362 sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i); 1363 if (sbuf[i]) { 1364 any = 1; 1365 qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]); 1366 } 1367 } 1368 1369 if (any) 1370 qib_disarm_piobufs_set(dd, sbuf, piobcnt); 1371 } 1372 1373 /* No txe_recover yet, if ever */ 1374 1375 /* No decode__errors yet */ 1376 static void err_decode(char *msg, size_t len, u64 errs, 1377 const struct qib_hwerror_msgs *msp) 1378 { 1379 u64 these, lmask; 1380 int took, multi, n = 0; 1381 1382 while (errs && msp && msp->mask) { 1383 multi = (msp->mask & (msp->mask - 1)); 1384 while (errs & msp->mask) { 1385 these = (errs & msp->mask); 1386 lmask = (these & (these - 1)) ^ these; 1387 if (len) { 1388 if (n++) { 1389 /* separate the strings */ 1390 *msg++ = ','; 1391 len--; 1392 } 1393 BUG_ON(!msp->sz); 1394 /* msp->sz counts the nul */ 1395 took = min_t(size_t, msp->sz - (size_t)1, len); 1396 memcpy(msg, msp->msg, took); 1397 len -= took; 1398 msg += took; 1399 if (len) 1400 *msg = '\0'; 1401 } 1402 errs &= ~lmask; 1403 if (len && multi) { 1404 /* More than one bit this mask */ 1405 int idx = -1; 1406 1407 while (lmask & msp->mask) { 1408 ++idx; 1409 lmask >>= 1; 1410 } 1411 took = scnprintf(msg, len, "_%d", idx); 1412 len -= took; 1413 msg += took; 1414 } 1415 } 1416 ++msp; 1417 } 1418 /* If some bits are left, show in hex. */ 1419 if (len && errs) 1420 snprintf(msg, len, "%sMORE:%llX", n ? "," : "", 1421 (unsigned long long) errs); 1422 } 1423 1424 /* only called if r1 set */ 1425 static void flush_fifo(struct qib_pportdata *ppd) 1426 { 1427 struct qib_devdata *dd = ppd->dd; 1428 u32 __iomem *piobuf; 1429 u32 bufn; 1430 u32 *hdr; 1431 u64 pbc; 1432 const unsigned hdrwords = 7; 1433 static struct qib_ib_header ibhdr = { 1434 .lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH), 1435 .lrh[1] = IB_LID_PERMISSIVE, 1436 .lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC), 1437 .lrh[3] = IB_LID_PERMISSIVE, 1438 .u.oth.bth[0] = cpu_to_be32( 1439 (IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY), 1440 .u.oth.bth[1] = cpu_to_be32(0), 1441 .u.oth.bth[2] = cpu_to_be32(0), 1442 .u.oth.u.ud.deth[0] = cpu_to_be32(0), 1443 .u.oth.u.ud.deth[1] = cpu_to_be32(0), 1444 }; 1445 1446 /* 1447 * Send a dummy VL15 packet to flush the launch FIFO. 1448 * This will not actually be sent since the TxeBypassIbc bit is set. 1449 */ 1450 pbc = PBC_7322_VL15_SEND | 1451 (((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) | 1452 (hdrwords + SIZE_OF_CRC); 1453 piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn); 1454 if (!piobuf) 1455 return; 1456 writeq(pbc, piobuf); 1457 hdr = (u32 *) &ibhdr; 1458 if (dd->flags & QIB_PIO_FLUSH_WC) { 1459 qib_flush_wc(); 1460 qib_pio_copy(piobuf + 2, hdr, hdrwords - 1); 1461 qib_flush_wc(); 1462 __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1); 1463 qib_flush_wc(); 1464 } else 1465 qib_pio_copy(piobuf + 2, hdr, hdrwords); 1466 qib_sendbuf_done(dd, bufn); 1467 } 1468 1469 /* 1470 * This is called with interrupts disabled and sdma_lock held. 1471 */ 1472 static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) 1473 { 1474 struct qib_devdata *dd = ppd->dd; 1475 u64 set_sendctrl = 0; 1476 u64 clr_sendctrl = 0; 1477 1478 if (op & QIB_SDMA_SENDCTRL_OP_ENABLE) 1479 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); 1480 else 1481 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); 1482 1483 if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE) 1484 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); 1485 else 1486 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); 1487 1488 if (op & QIB_SDMA_SENDCTRL_OP_HALT) 1489 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); 1490 else 1491 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); 1492 1493 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) 1494 set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | 1495 SYM_MASK(SendCtrl_0, TxeAbortIbc) | 1496 SYM_MASK(SendCtrl_0, TxeDrainRmFifo); 1497 else 1498 clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | 1499 SYM_MASK(SendCtrl_0, TxeAbortIbc) | 1500 SYM_MASK(SendCtrl_0, TxeDrainRmFifo); 1501 1502 spin_lock(&dd->sendctrl_lock); 1503 1504 /* If we are draining everything, block sends first */ 1505 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { 1506 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); 1507 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1508 qib_write_kreg(dd, kr_scratch, 0); 1509 } 1510 1511 ppd->p_sendctrl |= set_sendctrl; 1512 ppd->p_sendctrl &= ~clr_sendctrl; 1513 1514 if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP) 1515 qib_write_kreg_port(ppd, krp_sendctrl, 1516 ppd->p_sendctrl | 1517 SYM_MASK(SendCtrl_0, SDmaCleanup)); 1518 else 1519 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1520 qib_write_kreg(dd, kr_scratch, 0); 1521 1522 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { 1523 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); 1524 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1525 qib_write_kreg(dd, kr_scratch, 0); 1526 } 1527 1528 spin_unlock(&dd->sendctrl_lock); 1529 1530 if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1) 1531 flush_fifo(ppd); 1532 } 1533 1534 static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd) 1535 { 1536 __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned); 1537 } 1538 1539 static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd) 1540 { 1541 /* 1542 * Set SendDmaLenGen and clear and set 1543 * the MSB of the generation count to enable generation checking 1544 * and load the internal generation counter. 1545 */ 1546 qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt); 1547 qib_write_kreg_port(ppd, krp_senddmalengen, 1548 ppd->sdma_descq_cnt | 1549 (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB)); 1550 } 1551 1552 /* 1553 * Must be called with sdma_lock held, or before init finished. 1554 */ 1555 static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail) 1556 { 1557 /* Commit writes to memory and advance the tail on the chip */ 1558 wmb(); 1559 ppd->sdma_descq_tail = tail; 1560 qib_write_kreg_port(ppd, krp_senddmatail, tail); 1561 } 1562 1563 /* 1564 * This is called with interrupts disabled and sdma_lock held. 1565 */ 1566 static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd) 1567 { 1568 /* 1569 * Drain all FIFOs. 1570 * The hardware doesn't require this but we do it so that verbs 1571 * and user applications don't wait for link active to send stale 1572 * data. 1573 */ 1574 sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH); 1575 1576 qib_sdma_7322_setlengen(ppd); 1577 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ 1578 ppd->sdma_head_dma[0] = 0; 1579 qib_7322_sdma_sendctrl(ppd, 1580 ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP); 1581 } 1582 1583 #define DISABLES_SDMA ( \ 1584 QIB_E_P_SDMAHALT | \ 1585 QIB_E_P_SDMADESCADDRMISALIGN | \ 1586 QIB_E_P_SDMAMISSINGDW | \ 1587 QIB_E_P_SDMADWEN | \ 1588 QIB_E_P_SDMARPYTAG | \ 1589 QIB_E_P_SDMA1STDESC | \ 1590 QIB_E_P_SDMABASE | \ 1591 QIB_E_P_SDMATAILOUTOFBOUND | \ 1592 QIB_E_P_SDMAOUTOFBOUND | \ 1593 QIB_E_P_SDMAGENMISMATCH) 1594 1595 static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs) 1596 { 1597 unsigned long flags; 1598 struct qib_devdata *dd = ppd->dd; 1599 1600 errs &= QIB_E_P_SDMAERRS; 1601 err_decode(ppd->cpspec->sdmamsgbuf, sizeof(ppd->cpspec->sdmamsgbuf), 1602 errs, qib_7322p_error_msgs); 1603 1604 if (errs & QIB_E_P_SDMAUNEXPDATA) 1605 qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit, 1606 ppd->port); 1607 1608 spin_lock_irqsave(&ppd->sdma_lock, flags); 1609 1610 if (errs != QIB_E_P_SDMAHALT) { 1611 /* SDMA errors have QIB_E_P_SDMAHALT and another bit set */ 1612 qib_dev_porterr(dd, ppd->port, 1613 "SDMA %s 0x%016llx %s\n", 1614 qib_sdma_state_names[ppd->sdma_state.current_state], 1615 errs, ppd->cpspec->sdmamsgbuf); 1616 dump_sdma_7322_state(ppd); 1617 } 1618 1619 switch (ppd->sdma_state.current_state) { 1620 case qib_sdma_state_s00_hw_down: 1621 break; 1622 1623 case qib_sdma_state_s10_hw_start_up_wait: 1624 if (errs & QIB_E_P_SDMAHALT) 1625 __qib_sdma_process_event(ppd, 1626 qib_sdma_event_e20_hw_started); 1627 break; 1628 1629 case qib_sdma_state_s20_idle: 1630 break; 1631 1632 case qib_sdma_state_s30_sw_clean_up_wait: 1633 break; 1634 1635 case qib_sdma_state_s40_hw_clean_up_wait: 1636 if (errs & QIB_E_P_SDMAHALT) 1637 __qib_sdma_process_event(ppd, 1638 qib_sdma_event_e50_hw_cleaned); 1639 break; 1640 1641 case qib_sdma_state_s50_hw_halt_wait: 1642 if (errs & QIB_E_P_SDMAHALT) 1643 __qib_sdma_process_event(ppd, 1644 qib_sdma_event_e60_hw_halted); 1645 break; 1646 1647 case qib_sdma_state_s99_running: 1648 __qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted); 1649 __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted); 1650 break; 1651 } 1652 1653 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 1654 } 1655 1656 /* 1657 * handle per-device errors (not per-port errors) 1658 */ 1659 static noinline void handle_7322_errors(struct qib_devdata *dd) 1660 { 1661 char *msg; 1662 u64 iserr = 0; 1663 u64 errs; 1664 u64 mask; 1665 int log_idx; 1666 1667 qib_stats.sps_errints++; 1668 errs = qib_read_kreg64(dd, kr_errstatus); 1669 if (!errs) { 1670 qib_devinfo(dd->pcidev, 1671 "device error interrupt, but no error bits set!\n"); 1672 goto done; 1673 } 1674 1675 /* don't report errors that are masked */ 1676 errs &= dd->cspec->errormask; 1677 msg = dd->cspec->emsgbuf; 1678 1679 /* do these first, they are most important */ 1680 if (errs & QIB_E_HARDWARE) { 1681 *msg = '\0'; 1682 qib_7322_handle_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf)); 1683 } else 1684 for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx) 1685 if (errs & dd->eep_st_masks[log_idx].errs_to_log) 1686 qib_inc_eeprom_err(dd, log_idx, 1); 1687 1688 if (errs & QIB_E_SPKTERRS) { 1689 qib_disarm_7322_senderrbufs(dd->pport); 1690 qib_stats.sps_txerrs++; 1691 } else if (errs & QIB_E_INVALIDADDR) 1692 qib_stats.sps_txerrs++; 1693 else if (errs & QIB_E_ARMLAUNCH) { 1694 qib_stats.sps_txerrs++; 1695 qib_disarm_7322_senderrbufs(dd->pport); 1696 } 1697 qib_write_kreg(dd, kr_errclear, errs); 1698 1699 /* 1700 * The ones we mask off are handled specially below 1701 * or above. Also mask SDMADISABLED by default as it 1702 * is too chatty. 1703 */ 1704 mask = QIB_E_HARDWARE; 1705 *msg = '\0'; 1706 1707 err_decode(msg, sizeof(dd->cspec->emsgbuf), errs & ~mask, 1708 qib_7322error_msgs); 1709 1710 /* 1711 * Getting reset is a tragedy for all ports. Mark the device 1712 * _and_ the ports as "offline" in way meaningful to each. 1713 */ 1714 if (errs & QIB_E_RESET) { 1715 int pidx; 1716 1717 qib_dev_err(dd, 1718 "Got reset, requires re-init (unload and reload driver)\n"); 1719 dd->flags &= ~QIB_INITTED; /* needs re-init */ 1720 /* mark as having had error */ 1721 *dd->devstatusp |= QIB_STATUS_HWERROR; 1722 for (pidx = 0; pidx < dd->num_pports; ++pidx) 1723 if (dd->pport[pidx].link_speed_supported) 1724 *dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF; 1725 } 1726 1727 if (*msg && iserr) 1728 qib_dev_err(dd, "%s error\n", msg); 1729 1730 /* 1731 * If there were hdrq or egrfull errors, wake up any processes 1732 * waiting in poll. We used to try to check which contexts had 1733 * the overflow, but given the cost of that and the chip reads 1734 * to support it, it's better to just wake everybody up if we 1735 * get an overflow; waiters can poll again if it's not them. 1736 */ 1737 if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { 1738 qib_handle_urcv(dd, ~0U); 1739 if (errs & ERR_MASK(RcvEgrFullErr)) 1740 qib_stats.sps_buffull++; 1741 else 1742 qib_stats.sps_hdrfull++; 1743 } 1744 1745 done: 1746 return; 1747 } 1748 1749 static void qib_error_tasklet(unsigned long data) 1750 { 1751 struct qib_devdata *dd = (struct qib_devdata *)data; 1752 1753 handle_7322_errors(dd); 1754 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 1755 } 1756 1757 static void reenable_chase(unsigned long opaque) 1758 { 1759 struct qib_pportdata *ppd = (struct qib_pportdata *)opaque; 1760 1761 ppd->cpspec->chase_timer.expires = 0; 1762 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, 1763 QLOGIC_IB_IBCC_LINKINITCMD_POLL); 1764 } 1765 1766 static void disable_chase(struct qib_pportdata *ppd, unsigned long tnow, 1767 u8 ibclt) 1768 { 1769 ppd->cpspec->chase_end = 0; 1770 1771 if (!qib_chase) 1772 return; 1773 1774 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, 1775 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 1776 ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME; 1777 add_timer(&ppd->cpspec->chase_timer); 1778 } 1779 1780 static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) 1781 { 1782 u8 ibclt; 1783 unsigned long tnow; 1784 1785 ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState); 1786 1787 /* 1788 * Detect and handle the state chase issue, where we can 1789 * get stuck if we are unlucky on timing on both sides of 1790 * the link. If we are, we disable, set a timer, and 1791 * then re-enable. 1792 */ 1793 switch (ibclt) { 1794 case IB_7322_LT_STATE_CFGRCVFCFG: 1795 case IB_7322_LT_STATE_CFGWAITRMT: 1796 case IB_7322_LT_STATE_TXREVLANES: 1797 case IB_7322_LT_STATE_CFGENH: 1798 tnow = jiffies; 1799 if (ppd->cpspec->chase_end && 1800 time_after(tnow, ppd->cpspec->chase_end)) 1801 disable_chase(ppd, tnow, ibclt); 1802 else if (!ppd->cpspec->chase_end) 1803 ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME; 1804 break; 1805 default: 1806 ppd->cpspec->chase_end = 0; 1807 break; 1808 } 1809 1810 if (((ibclt >= IB_7322_LT_STATE_CFGTEST && 1811 ibclt <= IB_7322_LT_STATE_CFGWAITENH) || 1812 ibclt == IB_7322_LT_STATE_LINKUP) && 1813 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { 1814 force_h1(ppd); 1815 ppd->cpspec->qdr_reforce = 1; 1816 if (!ppd->dd->cspec->r1) 1817 serdes_7322_los_enable(ppd, 0); 1818 } else if (ppd->cpspec->qdr_reforce && 1819 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) && 1820 (ibclt == IB_7322_LT_STATE_CFGENH || 1821 ibclt == IB_7322_LT_STATE_CFGIDLE || 1822 ibclt == IB_7322_LT_STATE_LINKUP)) 1823 force_h1(ppd); 1824 1825 if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) && 1826 ppd->link_speed_enabled == QIB_IB_QDR && 1827 (ibclt == IB_7322_LT_STATE_CFGTEST || 1828 ibclt == IB_7322_LT_STATE_CFGENH || 1829 (ibclt >= IB_7322_LT_STATE_POLLACTIVE && 1830 ibclt <= IB_7322_LT_STATE_SLEEPQUIET))) 1831 adj_tx_serdes(ppd); 1832 1833 if (ibclt != IB_7322_LT_STATE_LINKUP) { 1834 u8 ltstate = qib_7322_phys_portstate(ibcst); 1835 u8 pibclt = (u8)SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, 1836 LinkTrainingState); 1837 if (!ppd->dd->cspec->r1 && 1838 pibclt == IB_7322_LT_STATE_LINKUP && 1839 ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && 1840 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && 1841 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && 1842 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) 1843 /* If the link went down (but no into recovery, 1844 * turn LOS back on */ 1845 serdes_7322_los_enable(ppd, 1); 1846 if (!ppd->cpspec->qdr_dfe_on && 1847 ibclt <= IB_7322_LT_STATE_SLEEPQUIET) { 1848 ppd->cpspec->qdr_dfe_on = 1; 1849 ppd->cpspec->qdr_dfe_time = 0; 1850 /* On link down, reenable QDR adaptation */ 1851 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 1852 ppd->dd->cspec->r1 ? 1853 QDR_STATIC_ADAPT_DOWN_R1 : 1854 QDR_STATIC_ADAPT_DOWN); 1855 pr_info( 1856 "IB%u:%u re-enabled QDR adaptation ibclt %x\n", 1857 ppd->dd->unit, ppd->port, ibclt); 1858 } 1859 } 1860 } 1861 1862 static int qib_7322_set_ib_cfg(struct qib_pportdata *, int, u32); 1863 1864 /* 1865 * This is per-pport error handling. 1866 * will likely get it's own MSIx interrupt (one for each port, 1867 * although just a single handler). 1868 */ 1869 static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) 1870 { 1871 char *msg; 1872 u64 ignore_this_time = 0, iserr = 0, errs, fmask; 1873 struct qib_devdata *dd = ppd->dd; 1874 1875 /* do this as soon as possible */ 1876 fmask = qib_read_kreg64(dd, kr_act_fmask); 1877 if (!fmask) 1878 check_7322_rxe_status(ppd); 1879 1880 errs = qib_read_kreg_port(ppd, krp_errstatus); 1881 if (!errs) 1882 qib_devinfo(dd->pcidev, 1883 "Port%d error interrupt, but no error bits set!\n", 1884 ppd->port); 1885 if (!fmask) 1886 errs &= ~QIB_E_P_IBSTATUSCHANGED; 1887 if (!errs) 1888 goto done; 1889 1890 msg = ppd->cpspec->epmsgbuf; 1891 *msg = '\0'; 1892 1893 if (errs & ~QIB_E_P_BITSEXTANT) { 1894 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), 1895 errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs); 1896 if (!*msg) 1897 snprintf(msg, sizeof(ppd->cpspec->epmsgbuf), 1898 "no others"); 1899 qib_dev_porterr(dd, ppd->port, 1900 "error interrupt with unknown errors 0x%016Lx set (and %s)\n", 1901 (errs & ~QIB_E_P_BITSEXTANT), msg); 1902 *msg = '\0'; 1903 } 1904 1905 if (errs & QIB_E_P_SHDR) { 1906 u64 symptom; 1907 1908 /* determine cause, then write to clear */ 1909 symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom); 1910 qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0); 1911 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), symptom, 1912 hdrchk_msgs); 1913 *msg = '\0'; 1914 /* senderrbuf cleared in SPKTERRS below */ 1915 } 1916 1917 if (errs & QIB_E_P_SPKTERRS) { 1918 if ((errs & QIB_E_P_LINK_PKTERRS) && 1919 !(ppd->lflags & QIBL_LINKACTIVE)) { 1920 /* 1921 * This can happen when trying to bring the link 1922 * up, but the IB link changes state at the "wrong" 1923 * time. The IB logic then complains that the packet 1924 * isn't valid. We don't want to confuse people, so 1925 * we just don't print them, except at debug 1926 */ 1927 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), 1928 (errs & QIB_E_P_LINK_PKTERRS), 1929 qib_7322p_error_msgs); 1930 *msg = '\0'; 1931 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; 1932 } 1933 qib_disarm_7322_senderrbufs(ppd); 1934 } else if ((errs & QIB_E_P_LINK_PKTERRS) && 1935 !(ppd->lflags & QIBL_LINKACTIVE)) { 1936 /* 1937 * This can happen when SMA is trying to bring the link 1938 * up, but the IB link changes state at the "wrong" time. 1939 * The IB logic then complains that the packet isn't 1940 * valid. We don't want to confuse people, so we just 1941 * don't print them, except at debug 1942 */ 1943 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), errs, 1944 qib_7322p_error_msgs); 1945 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; 1946 *msg = '\0'; 1947 } 1948 1949 qib_write_kreg_port(ppd, krp_errclear, errs); 1950 1951 errs &= ~ignore_this_time; 1952 if (!errs) 1953 goto done; 1954 1955 if (errs & QIB_E_P_RPKTERRS) 1956 qib_stats.sps_rcverrs++; 1957 if (errs & QIB_E_P_SPKTERRS) 1958 qib_stats.sps_txerrs++; 1959 1960 iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS); 1961 1962 if (errs & QIB_E_P_SDMAERRS) 1963 sdma_7322_p_errors(ppd, errs); 1964 1965 if (errs & QIB_E_P_IBSTATUSCHANGED) { 1966 u64 ibcs; 1967 u8 ltstate; 1968 1969 ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a); 1970 ltstate = qib_7322_phys_portstate(ibcs); 1971 1972 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) 1973 handle_serdes_issues(ppd, ibcs); 1974 if (!(ppd->cpspec->ibcctrl_a & 1975 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) { 1976 /* 1977 * We got our interrupt, so init code should be 1978 * happy and not try alternatives. Now squelch 1979 * other "chatter" from link-negotiation (pre Init) 1980 */ 1981 ppd->cpspec->ibcctrl_a |= 1982 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 1983 qib_write_kreg_port(ppd, krp_ibcctrl_a, 1984 ppd->cpspec->ibcctrl_a); 1985 } 1986 1987 /* Update our picture of width and speed from chip */ 1988 ppd->link_width_active = 1989 (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ? 1990 IB_WIDTH_4X : IB_WIDTH_1X; 1991 ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0, 1992 LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs & 1993 SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ? 1994 QIB_IB_DDR : QIB_IB_SDR; 1995 1996 if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate != 1997 IB_PHYSPORTSTATE_DISABLED) 1998 qib_set_ib_7322_lstate(ppd, 0, 1999 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 2000 else 2001 /* 2002 * Since going into a recovery state causes the link 2003 * state to go down and since recovery is transitory, 2004 * it is better if we "miss" ever seeing the link 2005 * training state go into recovery (i.e., ignore this 2006 * transition for link state special handling purposes) 2007 * without updating lastibcstat. 2008 */ 2009 if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && 2010 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && 2011 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && 2012 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) 2013 qib_handle_e_ibstatuschanged(ppd, ibcs); 2014 } 2015 if (*msg && iserr) 2016 qib_dev_porterr(dd, ppd->port, "%s error\n", msg); 2017 2018 if (ppd->state_wanted & ppd->lflags) 2019 wake_up_interruptible(&ppd->state_wait); 2020 done: 2021 return; 2022 } 2023 2024 /* enable/disable chip from delivering interrupts */ 2025 static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable) 2026 { 2027 if (enable) { 2028 if (dd->flags & QIB_BADINTR) 2029 return; 2030 qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask); 2031 /* cause any pending enabled interrupts to be re-delivered */ 2032 qib_write_kreg(dd, kr_intclear, 0ULL); 2033 if (dd->cspec->num_msix_entries) { 2034 /* and same for MSIx */ 2035 u64 val = qib_read_kreg64(dd, kr_intgranted); 2036 2037 if (val) 2038 qib_write_kreg(dd, kr_intgranted, val); 2039 } 2040 } else 2041 qib_write_kreg(dd, kr_intmask, 0ULL); 2042 } 2043 2044 /* 2045 * Try to cleanup as much as possible for anything that might have gone 2046 * wrong while in freeze mode, such as pio buffers being written by user 2047 * processes (causing armlaunch), send errors due to going into freeze mode, 2048 * etc., and try to avoid causing extra interrupts while doing so. 2049 * Forcibly update the in-memory pioavail register copies after cleanup 2050 * because the chip won't do it while in freeze mode (the register values 2051 * themselves are kept correct). 2052 * Make sure that we don't lose any important interrupts by using the chip 2053 * feature that says that writing 0 to a bit in *clear that is set in 2054 * *status will cause an interrupt to be generated again (if allowed by 2055 * the *mask value). 2056 * This is in chip-specific code because of all of the register accesses, 2057 * even though the details are similar on most chips. 2058 */ 2059 static void qib_7322_clear_freeze(struct qib_devdata *dd) 2060 { 2061 int pidx; 2062 2063 /* disable error interrupts, to avoid confusion */ 2064 qib_write_kreg(dd, kr_errmask, 0ULL); 2065 2066 for (pidx = 0; pidx < dd->num_pports; ++pidx) 2067 if (dd->pport[pidx].link_speed_supported) 2068 qib_write_kreg_port(dd->pport + pidx, krp_errmask, 2069 0ULL); 2070 2071 /* also disable interrupts; errormask is sometimes overwriten */ 2072 qib_7322_set_intr_state(dd, 0); 2073 2074 /* clear the freeze, and be sure chip saw it */ 2075 qib_write_kreg(dd, kr_control, dd->control); 2076 qib_read_kreg32(dd, kr_scratch); 2077 2078 /* 2079 * Force new interrupt if any hwerr, error or interrupt bits are 2080 * still set, and clear "safe" send packet errors related to freeze 2081 * and cancelling sends. Re-enable error interrupts before possible 2082 * force of re-interrupt on pending interrupts. 2083 */ 2084 qib_write_kreg(dd, kr_hwerrclear, 0ULL); 2085 qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); 2086 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 2087 /* We need to purge per-port errs and reset mask, too */ 2088 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 2089 if (!dd->pport[pidx].link_speed_supported) 2090 continue; 2091 qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull); 2092 qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull); 2093 } 2094 qib_7322_set_intr_state(dd, 1); 2095 } 2096 2097 /* no error handling to speak of */ 2098 /** 2099 * qib_7322_handle_hwerrors - display hardware errors. 2100 * @dd: the qlogic_ib device 2101 * @msg: the output buffer 2102 * @msgl: the size of the output buffer 2103 * 2104 * Use same msg buffer as regular errors to avoid excessive stack 2105 * use. Most hardware errors are catastrophic, but for right now, 2106 * we'll print them and continue. We reuse the same message buffer as 2107 * qib_handle_errors() to avoid excessive stack usage. 2108 */ 2109 static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg, 2110 size_t msgl) 2111 { 2112 u64 hwerrs; 2113 u32 ctrl; 2114 int isfatal = 0; 2115 2116 hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); 2117 if (!hwerrs) 2118 goto bail; 2119 if (hwerrs == ~0ULL) { 2120 qib_dev_err(dd, 2121 "Read of hardware error status failed (all bits set); ignoring\n"); 2122 goto bail; 2123 } 2124 qib_stats.sps_hwerrs++; 2125 2126 /* Always clear the error status register, except BIST fail */ 2127 qib_write_kreg(dd, kr_hwerrclear, hwerrs & 2128 ~HWE_MASK(PowerOnBISTFailed)); 2129 2130 hwerrs &= dd->cspec->hwerrmask; 2131 2132 /* no EEPROM logging, yet */ 2133 2134 if (hwerrs) 2135 qib_devinfo(dd->pcidev, 2136 "Hardware error: hwerr=0x%llx (cleared)\n", 2137 (unsigned long long) hwerrs); 2138 2139 ctrl = qib_read_kreg32(dd, kr_control); 2140 if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) { 2141 /* 2142 * No recovery yet... 2143 */ 2144 if ((hwerrs & ~HWE_MASK(LATriggered)) || 2145 dd->cspec->stay_in_freeze) { 2146 /* 2147 * If any set that we aren't ignoring only make the 2148 * complaint once, in case it's stuck or recurring, 2149 * and we get here multiple times 2150 * Force link down, so switch knows, and 2151 * LEDs are turned off. 2152 */ 2153 if (dd->flags & QIB_INITTED) 2154 isfatal = 1; 2155 } else 2156 qib_7322_clear_freeze(dd); 2157 } 2158 2159 if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { 2160 isfatal = 1; 2161 strlcpy(msg, 2162 "[Memory BIST test failed, InfiniPath hardware unusable]", 2163 msgl); 2164 /* ignore from now on, so disable until driver reloaded */ 2165 dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); 2166 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 2167 } 2168 2169 err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs); 2170 2171 /* Ignore esoteric PLL failures et al. */ 2172 2173 qib_dev_err(dd, "%s hardware error\n", msg); 2174 2175 if (hwerrs & 2176 (SYM_MASK(HwErrMask, SDmaMemReadErrMask_0) | 2177 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) { 2178 int pidx = 0; 2179 int err; 2180 unsigned long flags; 2181 struct qib_pportdata *ppd = dd->pport; 2182 2183 for (; pidx < dd->num_pports; ++pidx, ppd++) { 2184 err = 0; 2185 if (pidx == 0 && (hwerrs & 2186 SYM_MASK(HwErrMask, SDmaMemReadErrMask_0))) 2187 err++; 2188 if (pidx == 1 && (hwerrs & 2189 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) 2190 err++; 2191 if (err) { 2192 spin_lock_irqsave(&ppd->sdma_lock, flags); 2193 dump_sdma_7322_state(ppd); 2194 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 2195 } 2196 } 2197 } 2198 2199 if (isfatal && !dd->diag_client) { 2200 qib_dev_err(dd, 2201 "Fatal Hardware Error, no longer usable, SN %.16s\n", 2202 dd->serial); 2203 /* 2204 * for /sys status file and user programs to print; if no 2205 * trailing brace is copied, we'll know it was truncated. 2206 */ 2207 if (dd->freezemsg) 2208 snprintf(dd->freezemsg, dd->freezelen, 2209 "{%s}", msg); 2210 qib_disable_after_error(dd); 2211 } 2212 bail:; 2213 } 2214 2215 /** 2216 * qib_7322_init_hwerrors - enable hardware errors 2217 * @dd: the qlogic_ib device 2218 * 2219 * now that we have finished initializing everything that might reasonably 2220 * cause a hardware error, and cleared those errors bits as they occur, 2221 * we can enable hardware errors in the mask (potentially enabling 2222 * freeze mode), and enable hardware errors as errors (along with 2223 * everything else) in errormask 2224 */ 2225 static void qib_7322_init_hwerrors(struct qib_devdata *dd) 2226 { 2227 int pidx; 2228 u64 extsval; 2229 2230 extsval = qib_read_kreg64(dd, kr_extstatus); 2231 if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED | 2232 QIB_EXTS_MEMBIST_ENDTEST))) 2233 qib_dev_err(dd, "MemBIST did not complete!\n"); 2234 2235 /* never clear BIST failure, so reported on each driver load */ 2236 qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); 2237 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 2238 2239 /* clear all */ 2240 qib_write_kreg(dd, kr_errclear, ~0ULL); 2241 /* enable errors that are masked, at least this first time. */ 2242 qib_write_kreg(dd, kr_errmask, ~0ULL); 2243 dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); 2244 for (pidx = 0; pidx < dd->num_pports; ++pidx) 2245 if (dd->pport[pidx].link_speed_supported) 2246 qib_write_kreg_port(dd->pport + pidx, krp_errmask, 2247 ~0ULL); 2248 } 2249 2250 /* 2251 * Disable and enable the armlaunch error. Used for PIO bandwidth testing 2252 * on chips that are count-based, rather than trigger-based. There is no 2253 * reference counting, but that's also fine, given the intended use. 2254 * Only chip-specific because it's all register accesses 2255 */ 2256 static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable) 2257 { 2258 if (enable) { 2259 qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH); 2260 dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH; 2261 } else 2262 dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH; 2263 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 2264 } 2265 2266 /* 2267 * Formerly took parameter <which> in pre-shifted, 2268 * pre-merged form with LinkCmd and LinkInitCmd 2269 * together, and assuming the zero was NOP. 2270 */ 2271 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, 2272 u16 linitcmd) 2273 { 2274 u64 mod_wd; 2275 struct qib_devdata *dd = ppd->dd; 2276 unsigned long flags; 2277 2278 if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { 2279 /* 2280 * If we are told to disable, note that so link-recovery 2281 * code does not attempt to bring us back up. 2282 * Also reset everything that we can, so we start 2283 * completely clean when re-enabled (before we 2284 * actually issue the disable to the IBC) 2285 */ 2286 qib_7322_mini_pcs_reset(ppd); 2287 spin_lock_irqsave(&ppd->lflags_lock, flags); 2288 ppd->lflags |= QIBL_IB_LINK_DISABLED; 2289 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2290 } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { 2291 /* 2292 * Any other linkinitcmd will lead to LINKDOWN and then 2293 * to INIT (if all is well), so clear flag to let 2294 * link-recovery code attempt to bring us back up. 2295 */ 2296 spin_lock_irqsave(&ppd->lflags_lock, flags); 2297 ppd->lflags &= ~QIBL_IB_LINK_DISABLED; 2298 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2299 /* 2300 * Clear status change interrupt reduction so the 2301 * new state is seen. 2302 */ 2303 ppd->cpspec->ibcctrl_a &= 2304 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 2305 } 2306 2307 mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) | 2308 (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); 2309 2310 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a | 2311 mod_wd); 2312 /* write to chip to prevent back-to-back writes of ibc reg */ 2313 qib_write_kreg(dd, kr_scratch, 0); 2314 2315 } 2316 2317 /* 2318 * The total RCV buffer memory is 64KB, used for both ports, and is 2319 * in units of 64 bytes (same as IB flow control credit unit). 2320 * The consumedVL unit in the same registers are in 32 byte units! 2321 * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks, 2322 * and we can therefore allocate just 9 IB credits for 2 VL15 packets 2323 * in krp_rxcreditvl15, rather than 10. 2324 */ 2325 #define RCV_BUF_UNITSZ 64 2326 #define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports)) 2327 2328 static void set_vls(struct qib_pportdata *ppd) 2329 { 2330 int i, numvls, totcred, cred_vl, vl0extra; 2331 struct qib_devdata *dd = ppd->dd; 2332 u64 val; 2333 2334 numvls = qib_num_vls(ppd->vls_operational); 2335 2336 /* 2337 * Set up per-VL credits. Below is kluge based on these assumptions: 2338 * 1) port is disabled at the time early_init is called. 2339 * 2) give VL15 17 credits, for two max-plausible packets. 2340 * 3) Give VL0-N the rest, with any rounding excess used for VL0 2341 */ 2342 /* 2 VL15 packets @ 288 bytes each (including IB headers) */ 2343 totcred = NUM_RCV_BUF_UNITS(dd); 2344 cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ; 2345 totcred -= cred_vl; 2346 qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl); 2347 cred_vl = totcred / numvls; 2348 vl0extra = totcred - cred_vl * numvls; 2349 qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra); 2350 for (i = 1; i < numvls; i++) 2351 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl); 2352 for (; i < 8; i++) /* no buffer space for other VLs */ 2353 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); 2354 2355 /* Notify IBC that credits need to be recalculated */ 2356 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); 2357 val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); 2358 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 2359 qib_write_kreg(dd, kr_scratch, 0ULL); 2360 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); 2361 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 2362 2363 for (i = 0; i < numvls; i++) 2364 val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i); 2365 val = qib_read_kreg_port(ppd, krp_rxcreditvl15); 2366 2367 /* Change the number of operational VLs */ 2368 ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a & 2369 ~SYM_MASK(IBCCtrlA_0, NumVLane)) | 2370 ((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane)); 2371 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 2372 qib_write_kreg(dd, kr_scratch, 0ULL); 2373 } 2374 2375 /* 2376 * The code that deals with actual SerDes is in serdes_7322_init(). 2377 * Compared to the code for iba7220, it is minimal. 2378 */ 2379 static int serdes_7322_init(struct qib_pportdata *ppd); 2380 2381 /** 2382 * qib_7322_bringup_serdes - bring up the serdes 2383 * @ppd: physical port on the qlogic_ib device 2384 */ 2385 static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) 2386 { 2387 struct qib_devdata *dd = ppd->dd; 2388 u64 val, guid, ibc; 2389 unsigned long flags; 2390 int ret = 0; 2391 2392 /* 2393 * SerDes model not in Pd, but still need to 2394 * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere 2395 * eventually. 2396 */ 2397 /* Put IBC in reset, sends disabled (should be in reset already) */ 2398 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); 2399 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 2400 qib_write_kreg(dd, kr_scratch, 0ULL); 2401 2402 /* ensure previous Tx parameters are not still forced */ 2403 qib_write_kreg_port(ppd, krp_tx_deemph_override, 2404 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 2405 reset_tx_deemphasis_override)); 2406 2407 if (qib_compat_ddr_negotiate) { 2408 ppd->cpspec->ibdeltainprog = 1; 2409 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, 2410 crp_ibsymbolerr); 2411 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, 2412 crp_iblinkerrrecov); 2413 } 2414 2415 /* flowcontrolwatermark is in units of KBytes */ 2416 ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark); 2417 /* 2418 * Flow control is sent this often, even if no changes in 2419 * buffer space occur. Units are 128ns for this chip. 2420 * Set to 3usec. 2421 */ 2422 ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod); 2423 /* max error tolerance */ 2424 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold); 2425 /* IB credit flow control. */ 2426 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold); 2427 /* 2428 * set initial max size pkt IBC will send, including ICRC; it's the 2429 * PIO buffer size in dwords, less 1; also see qib_set_mtu() 2430 */ 2431 ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << 2432 SYM_LSB(IBCCtrlA_0, MaxPktLen); 2433 ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */ 2434 2435 /* 2436 * Reset the PCS interface to the serdes (and also ibc, which is still 2437 * in reset from above). Writes new value of ibcctrl_a as last step. 2438 */ 2439 qib_7322_mini_pcs_reset(ppd); 2440 2441 if (!ppd->cpspec->ibcctrl_b) { 2442 unsigned lse = ppd->link_speed_enabled; 2443 2444 /* 2445 * Not on re-init after reset, establish shadow 2446 * and force initial config. 2447 */ 2448 ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd, 2449 krp_ibcctrl_b); 2450 ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR | 2451 IBA7322_IBC_SPEED_DDR | 2452 IBA7322_IBC_SPEED_SDR | 2453 IBA7322_IBC_WIDTH_AUTONEG | 2454 SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED)); 2455 if (lse & (lse - 1)) /* Muliple speeds enabled */ 2456 ppd->cpspec->ibcctrl_b |= 2457 (lse << IBA7322_IBC_SPEED_LSB) | 2458 IBA7322_IBC_IBTA_1_2_MASK | 2459 IBA7322_IBC_MAX_SPEED_MASK; 2460 else 2461 ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ? 2462 IBA7322_IBC_SPEED_QDR | 2463 IBA7322_IBC_IBTA_1_2_MASK : 2464 (lse == QIB_IB_DDR) ? 2465 IBA7322_IBC_SPEED_DDR : 2466 IBA7322_IBC_SPEED_SDR; 2467 if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) == 2468 (IB_WIDTH_1X | IB_WIDTH_4X)) 2469 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG; 2470 else 2471 ppd->cpspec->ibcctrl_b |= 2472 ppd->link_width_enabled == IB_WIDTH_4X ? 2473 IBA7322_IBC_WIDTH_4X_ONLY : 2474 IBA7322_IBC_WIDTH_1X_ONLY; 2475 2476 /* always enable these on driver reload, not sticky */ 2477 ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK | 2478 IBA7322_IBC_HRTBT_MASK); 2479 } 2480 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 2481 2482 /* setup so we have more time at CFGTEST to change H1 */ 2483 val = qib_read_kreg_port(ppd, krp_ibcctrl_c); 2484 val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH); 2485 val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH); 2486 qib_write_kreg_port(ppd, krp_ibcctrl_c, val); 2487 2488 serdes_7322_init(ppd); 2489 2490 guid = be64_to_cpu(ppd->guid); 2491 if (!guid) { 2492 if (dd->base_guid) 2493 guid = be64_to_cpu(dd->base_guid) + ppd->port - 1; 2494 ppd->guid = cpu_to_be64(guid); 2495 } 2496 2497 qib_write_kreg_port(ppd, krp_hrtbt_guid, guid); 2498 /* write to chip to prevent back-to-back writes of ibc reg */ 2499 qib_write_kreg(dd, kr_scratch, 0); 2500 2501 /* Enable port */ 2502 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); 2503 set_vls(ppd); 2504 2505 /* initially come up DISABLED, without sending anything. */ 2506 val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << 2507 QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); 2508 qib_write_kreg_port(ppd, krp_ibcctrl_a, val); 2509 qib_write_kreg(dd, kr_scratch, 0ULL); 2510 /* clear the linkinit cmds */ 2511 ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); 2512 2513 /* be paranoid against later code motion, etc. */ 2514 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 2515 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); 2516 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); 2517 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 2518 2519 /* Also enable IBSTATUSCHG interrupt. */ 2520 val = qib_read_kreg_port(ppd, krp_errmask); 2521 qib_write_kreg_port(ppd, krp_errmask, 2522 val | ERR_MASK_N(IBStatusChanged)); 2523 2524 /* Always zero until we start messing with SerDes for real */ 2525 return ret; 2526 } 2527 2528 /** 2529 * qib_7322_quiet_serdes - set serdes to txidle 2530 * @dd: the qlogic_ib device 2531 * Called when driver is being unloaded 2532 */ 2533 static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd) 2534 { 2535 u64 val; 2536 unsigned long flags; 2537 2538 qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 2539 2540 spin_lock_irqsave(&ppd->lflags_lock, flags); 2541 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; 2542 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2543 wake_up(&ppd->cpspec->autoneg_wait); 2544 cancel_delayed_work_sync(&ppd->cpspec->autoneg_work); 2545 if (ppd->dd->cspec->r1) 2546 cancel_delayed_work_sync(&ppd->cpspec->ipg_work); 2547 2548 ppd->cpspec->chase_end = 0; 2549 if (ppd->cpspec->chase_timer.data) /* if initted */ 2550 del_timer_sync(&ppd->cpspec->chase_timer); 2551 2552 /* 2553 * Despite the name, actually disables IBC as well. Do it when 2554 * we are as sure as possible that no more packets can be 2555 * received, following the down and the PCS reset. 2556 * The actual disabling happens in qib_7322_mini_pci_reset(), 2557 * along with the PCS being reset. 2558 */ 2559 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); 2560 qib_7322_mini_pcs_reset(ppd); 2561 2562 /* 2563 * Update the adjusted counters so the adjustment persists 2564 * across driver reload. 2565 */ 2566 if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta || 2567 ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) { 2568 struct qib_devdata *dd = ppd->dd; 2569 u64 diagc; 2570 2571 /* enable counter writes */ 2572 diagc = qib_read_kreg64(dd, kr_hwdiagctrl); 2573 qib_write_kreg(dd, kr_hwdiagctrl, 2574 diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); 2575 2576 if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) { 2577 val = read_7322_creg32_port(ppd, crp_ibsymbolerr); 2578 if (ppd->cpspec->ibdeltainprog) 2579 val -= val - ppd->cpspec->ibsymsnap; 2580 val -= ppd->cpspec->ibsymdelta; 2581 write_7322_creg_port(ppd, crp_ibsymbolerr, val); 2582 } 2583 if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) { 2584 val = read_7322_creg32_port(ppd, crp_iblinkerrrecov); 2585 if (ppd->cpspec->ibdeltainprog) 2586 val -= val - ppd->cpspec->iblnkerrsnap; 2587 val -= ppd->cpspec->iblnkerrdelta; 2588 write_7322_creg_port(ppd, crp_iblinkerrrecov, val); 2589 } 2590 if (ppd->cpspec->iblnkdowndelta) { 2591 val = read_7322_creg32_port(ppd, crp_iblinkdown); 2592 val += ppd->cpspec->iblnkdowndelta; 2593 write_7322_creg_port(ppd, crp_iblinkdown, val); 2594 } 2595 /* 2596 * No need to save ibmalfdelta since IB perfcounters 2597 * are cleared on driver reload. 2598 */ 2599 2600 /* and disable counter writes */ 2601 qib_write_kreg(dd, kr_hwdiagctrl, diagc); 2602 } 2603 } 2604 2605 /** 2606 * qib_setup_7322_setextled - set the state of the two external LEDs 2607 * @ppd: physical port on the qlogic_ib device 2608 * @on: whether the link is up or not 2609 * 2610 * The exact combo of LEDs if on is true is determined by looking 2611 * at the ibcstatus. 2612 * 2613 * These LEDs indicate the physical and logical state of IB link. 2614 * For this chip (at least with recommended board pinouts), LED1 2615 * is Yellow (logical state) and LED2 is Green (physical state), 2616 * 2617 * Note: We try to match the Mellanox HCA LED behavior as best 2618 * we can. Green indicates physical link state is OK (something is 2619 * plugged in, and we can train). 2620 * Amber indicates the link is logically up (ACTIVE). 2621 * Mellanox further blinks the amber LED to indicate data packet 2622 * activity, but we have no hardware support for that, so it would 2623 * require waking up every 10-20 msecs and checking the counters 2624 * on the chip, and then turning the LED off if appropriate. That's 2625 * visible overhead, so not something we will do. 2626 */ 2627 static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on) 2628 { 2629 struct qib_devdata *dd = ppd->dd; 2630 u64 extctl, ledblink = 0, val; 2631 unsigned long flags; 2632 int yel, grn; 2633 2634 /* 2635 * The diags use the LED to indicate diag info, so we leave 2636 * the external LED alone when the diags are running. 2637 */ 2638 if (dd->diag_client) 2639 return; 2640 2641 /* Allow override of LED display for, e.g. Locating system in rack */ 2642 if (ppd->led_override) { 2643 grn = (ppd->led_override & QIB_LED_PHYS); 2644 yel = (ppd->led_override & QIB_LED_LOG); 2645 } else if (on) { 2646 val = qib_read_kreg_port(ppd, krp_ibcstatus_a); 2647 grn = qib_7322_phys_portstate(val) == 2648 IB_PHYSPORTSTATE_LINKUP; 2649 yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE; 2650 } else { 2651 grn = 0; 2652 yel = 0; 2653 } 2654 2655 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 2656 extctl = dd->cspec->extctrl & (ppd->port == 1 ? 2657 ~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK); 2658 if (grn) { 2659 extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN; 2660 /* 2661 * Counts are in chip clock (4ns) periods. 2662 * This is 1/16 sec (66.6ms) on, 2663 * 3/16 sec (187.5 ms) off, with packets rcvd. 2664 */ 2665 ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) | 2666 ((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT); 2667 } 2668 if (yel) 2669 extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL; 2670 dd->cspec->extctrl = extctl; 2671 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 2672 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 2673 2674 if (ledblink) /* blink the LED on packet receive */ 2675 qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink); 2676 } 2677 2678 #ifdef CONFIG_INFINIBAND_QIB_DCA 2679 2680 static int qib_7322_notify_dca(struct qib_devdata *dd, unsigned long event) 2681 { 2682 switch (event) { 2683 case DCA_PROVIDER_ADD: 2684 if (dd->flags & QIB_DCA_ENABLED) 2685 break; 2686 if (!dca_add_requester(&dd->pcidev->dev)) { 2687 qib_devinfo(dd->pcidev, "DCA enabled\n"); 2688 dd->flags |= QIB_DCA_ENABLED; 2689 qib_setup_dca(dd); 2690 } 2691 break; 2692 case DCA_PROVIDER_REMOVE: 2693 if (dd->flags & QIB_DCA_ENABLED) { 2694 dca_remove_requester(&dd->pcidev->dev); 2695 dd->flags &= ~QIB_DCA_ENABLED; 2696 dd->cspec->dca_ctrl = 0; 2697 qib_write_kreg(dd, KREG_IDX(DCACtrlA), 2698 dd->cspec->dca_ctrl); 2699 } 2700 break; 2701 } 2702 return 0; 2703 } 2704 2705 static void qib_update_rhdrq_dca(struct qib_ctxtdata *rcd, int cpu) 2706 { 2707 struct qib_devdata *dd = rcd->dd; 2708 struct qib_chip_specific *cspec = dd->cspec; 2709 2710 if (!(dd->flags & QIB_DCA_ENABLED)) 2711 return; 2712 if (cspec->rhdr_cpu[rcd->ctxt] != cpu) { 2713 const struct dca_reg_map *rmp; 2714 2715 cspec->rhdr_cpu[rcd->ctxt] = cpu; 2716 rmp = &dca_rcvhdr_reg_map[rcd->ctxt]; 2717 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] &= rmp->mask; 2718 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] |= 2719 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << rmp->lsb; 2720 qib_devinfo(dd->pcidev, 2721 "Ctxt %d cpu %d dca %llx\n", rcd->ctxt, cpu, 2722 (long long) cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); 2723 qib_write_kreg(dd, rmp->regno, 2724 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); 2725 cspec->dca_ctrl |= SYM_MASK(DCACtrlA, RcvHdrqDCAEnable); 2726 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); 2727 } 2728 } 2729 2730 static void qib_update_sdma_dca(struct qib_pportdata *ppd, int cpu) 2731 { 2732 struct qib_devdata *dd = ppd->dd; 2733 struct qib_chip_specific *cspec = dd->cspec; 2734 unsigned pidx = ppd->port - 1; 2735 2736 if (!(dd->flags & QIB_DCA_ENABLED)) 2737 return; 2738 if (cspec->sdma_cpu[pidx] != cpu) { 2739 cspec->sdma_cpu[pidx] = cpu; 2740 cspec->dca_rcvhdr_ctrl[4] &= ~(ppd->hw_pidx ? 2741 SYM_MASK(DCACtrlF, SendDma1DCAOPH) : 2742 SYM_MASK(DCACtrlF, SendDma0DCAOPH)); 2743 cspec->dca_rcvhdr_ctrl[4] |= 2744 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << 2745 (ppd->hw_pidx ? 2746 SYM_LSB(DCACtrlF, SendDma1DCAOPH) : 2747 SYM_LSB(DCACtrlF, SendDma0DCAOPH)); 2748 qib_devinfo(dd->pcidev, 2749 "sdma %d cpu %d dca %llx\n", ppd->hw_pidx, cpu, 2750 (long long) cspec->dca_rcvhdr_ctrl[4]); 2751 qib_write_kreg(dd, KREG_IDX(DCACtrlF), 2752 cspec->dca_rcvhdr_ctrl[4]); 2753 cspec->dca_ctrl |= ppd->hw_pidx ? 2754 SYM_MASK(DCACtrlA, SendDMAHead1DCAEnable) : 2755 SYM_MASK(DCACtrlA, SendDMAHead0DCAEnable); 2756 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); 2757 } 2758 } 2759 2760 static void qib_setup_dca(struct qib_devdata *dd) 2761 { 2762 struct qib_chip_specific *cspec = dd->cspec; 2763 int i; 2764 2765 for (i = 0; i < ARRAY_SIZE(cspec->rhdr_cpu); i++) 2766 cspec->rhdr_cpu[i] = -1; 2767 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) 2768 cspec->sdma_cpu[i] = -1; 2769 cspec->dca_rcvhdr_ctrl[0] = 2770 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq0DCAXfrCnt)) | 2771 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq1DCAXfrCnt)) | 2772 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq2DCAXfrCnt)) | 2773 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq3DCAXfrCnt)); 2774 cspec->dca_rcvhdr_ctrl[1] = 2775 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq4DCAXfrCnt)) | 2776 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq5DCAXfrCnt)) | 2777 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq6DCAXfrCnt)) | 2778 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq7DCAXfrCnt)); 2779 cspec->dca_rcvhdr_ctrl[2] = 2780 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq8DCAXfrCnt)) | 2781 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq9DCAXfrCnt)) | 2782 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq10DCAXfrCnt)) | 2783 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq11DCAXfrCnt)); 2784 cspec->dca_rcvhdr_ctrl[3] = 2785 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq12DCAXfrCnt)) | 2786 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq13DCAXfrCnt)) | 2787 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq14DCAXfrCnt)) | 2788 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq15DCAXfrCnt)); 2789 cspec->dca_rcvhdr_ctrl[4] = 2790 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq16DCAXfrCnt)) | 2791 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq17DCAXfrCnt)); 2792 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) 2793 qib_write_kreg(dd, KREG_IDX(DCACtrlB) + i, 2794 cspec->dca_rcvhdr_ctrl[i]); 2795 for (i = 0; i < cspec->num_msix_entries; i++) 2796 setup_dca_notifier(dd, &cspec->msix_entries[i]); 2797 } 2798 2799 static void qib_irq_notifier_notify(struct irq_affinity_notify *notify, 2800 const cpumask_t *mask) 2801 { 2802 struct qib_irq_notify *n = 2803 container_of(notify, struct qib_irq_notify, notify); 2804 int cpu = cpumask_first(mask); 2805 2806 if (n->rcv) { 2807 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; 2808 2809 qib_update_rhdrq_dca(rcd, cpu); 2810 } else { 2811 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; 2812 2813 qib_update_sdma_dca(ppd, cpu); 2814 } 2815 } 2816 2817 static void qib_irq_notifier_release(struct kref *ref) 2818 { 2819 struct qib_irq_notify *n = 2820 container_of(ref, struct qib_irq_notify, notify.kref); 2821 struct qib_devdata *dd; 2822 2823 if (n->rcv) { 2824 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; 2825 2826 dd = rcd->dd; 2827 } else { 2828 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; 2829 2830 dd = ppd->dd; 2831 } 2832 qib_devinfo(dd->pcidev, 2833 "release on HCA notify 0x%p n 0x%p\n", ref, n); 2834 kfree(n); 2835 } 2836 #endif 2837 2838 /* 2839 * Disable MSIx interrupt if enabled, call generic MSIx code 2840 * to cleanup, and clear pending MSIx interrupts. 2841 * Used for fallback to INTx, after reset, and when MSIx setup fails. 2842 */ 2843 static void qib_7322_nomsix(struct qib_devdata *dd) 2844 { 2845 u64 intgranted; 2846 int n; 2847 2848 dd->cspec->main_int_mask = ~0ULL; 2849 n = dd->cspec->num_msix_entries; 2850 if (n) { 2851 int i; 2852 2853 dd->cspec->num_msix_entries = 0; 2854 for (i = 0; i < n; i++) { 2855 #ifdef CONFIG_INFINIBAND_QIB_DCA 2856 reset_dca_notifier(dd, &dd->cspec->msix_entries[i]); 2857 #endif 2858 irq_set_affinity_hint( 2859 dd->cspec->msix_entries[i].msix.vector, NULL); 2860 free_cpumask_var(dd->cspec->msix_entries[i].mask); 2861 free_irq(dd->cspec->msix_entries[i].msix.vector, 2862 dd->cspec->msix_entries[i].arg); 2863 } 2864 qib_nomsix(dd); 2865 } 2866 /* make sure no MSIx interrupts are left pending */ 2867 intgranted = qib_read_kreg64(dd, kr_intgranted); 2868 if (intgranted) 2869 qib_write_kreg(dd, kr_intgranted, intgranted); 2870 } 2871 2872 static void qib_7322_free_irq(struct qib_devdata *dd) 2873 { 2874 if (dd->cspec->irq) { 2875 free_irq(dd->cspec->irq, dd); 2876 dd->cspec->irq = 0; 2877 } 2878 qib_7322_nomsix(dd); 2879 } 2880 2881 static void qib_setup_7322_cleanup(struct qib_devdata *dd) 2882 { 2883 int i; 2884 2885 #ifdef CONFIG_INFINIBAND_QIB_DCA 2886 if (dd->flags & QIB_DCA_ENABLED) { 2887 dca_remove_requester(&dd->pcidev->dev); 2888 dd->flags &= ~QIB_DCA_ENABLED; 2889 dd->cspec->dca_ctrl = 0; 2890 qib_write_kreg(dd, KREG_IDX(DCACtrlA), dd->cspec->dca_ctrl); 2891 } 2892 #endif 2893 2894 qib_7322_free_irq(dd); 2895 kfree(dd->cspec->cntrs); 2896 kfree(dd->cspec->sendchkenable); 2897 kfree(dd->cspec->sendgrhchk); 2898 kfree(dd->cspec->sendibchk); 2899 kfree(dd->cspec->msix_entries); 2900 for (i = 0; i < dd->num_pports; i++) { 2901 unsigned long flags; 2902 u32 mask = QSFP_GPIO_MOD_PRS_N | 2903 (QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT); 2904 2905 kfree(dd->pport[i].cpspec->portcntrs); 2906 if (dd->flags & QIB_HAS_QSFP) { 2907 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 2908 dd->cspec->gpio_mask &= ~mask; 2909 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 2910 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 2911 qib_qsfp_deinit(&dd->pport[i].cpspec->qsfp_data); 2912 } 2913 if (dd->pport[i].ibport_data.smi_ah) 2914 ib_destroy_ah(&dd->pport[i].ibport_data.smi_ah->ibah); 2915 } 2916 } 2917 2918 /* handle SDMA interrupts */ 2919 static void sdma_7322_intr(struct qib_devdata *dd, u64 istat) 2920 { 2921 struct qib_pportdata *ppd0 = &dd->pport[0]; 2922 struct qib_pportdata *ppd1 = &dd->pport[1]; 2923 u64 intr0 = istat & (INT_MASK_P(SDma, 0) | 2924 INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0)); 2925 u64 intr1 = istat & (INT_MASK_P(SDma, 1) | 2926 INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1)); 2927 2928 if (intr0) 2929 qib_sdma_intr(ppd0); 2930 if (intr1) 2931 qib_sdma_intr(ppd1); 2932 2933 if (istat & INT_MASK_PM(SDmaCleanupDone, 0)) 2934 qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started); 2935 if (istat & INT_MASK_PM(SDmaCleanupDone, 1)) 2936 qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started); 2937 } 2938 2939 /* 2940 * Set or clear the Send buffer available interrupt enable bit. 2941 */ 2942 static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint) 2943 { 2944 unsigned long flags; 2945 2946 spin_lock_irqsave(&dd->sendctrl_lock, flags); 2947 if (needint) 2948 dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail); 2949 else 2950 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail); 2951 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); 2952 qib_write_kreg(dd, kr_scratch, 0ULL); 2953 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 2954 } 2955 2956 /* 2957 * Somehow got an interrupt with reserved bits set in interrupt status. 2958 * Print a message so we know it happened, then clear them. 2959 * keep mainline interrupt handler cache-friendly 2960 */ 2961 static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat) 2962 { 2963 u64 kills; 2964 char msg[128]; 2965 2966 kills = istat & ~QIB_I_BITSEXTANT; 2967 qib_dev_err(dd, 2968 "Clearing reserved interrupt(s) 0x%016llx: %s\n", 2969 (unsigned long long) kills, msg); 2970 qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills)); 2971 } 2972 2973 /* keep mainline interrupt handler cache-friendly */ 2974 static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd) 2975 { 2976 u32 gpiostatus; 2977 int handled = 0; 2978 int pidx; 2979 2980 /* 2981 * Boards for this chip currently don't use GPIO interrupts, 2982 * so clear by writing GPIOstatus to GPIOclear, and complain 2983 * to developer. To avoid endless repeats, clear 2984 * the bits in the mask, since there is some kind of 2985 * programming error or chip problem. 2986 */ 2987 gpiostatus = qib_read_kreg32(dd, kr_gpio_status); 2988 /* 2989 * In theory, writing GPIOstatus to GPIOclear could 2990 * have a bad side-effect on some diagnostic that wanted 2991 * to poll for a status-change, but the various shadows 2992 * make that problematic at best. Diags will just suppress 2993 * all GPIO interrupts during such tests. 2994 */ 2995 qib_write_kreg(dd, kr_gpio_clear, gpiostatus); 2996 /* 2997 * Check for QSFP MOD_PRS changes 2998 * only works for single port if IB1 != pidx1 2999 */ 3000 for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP); 3001 ++pidx) { 3002 struct qib_pportdata *ppd; 3003 struct qib_qsfp_data *qd; 3004 u32 mask; 3005 3006 if (!dd->pport[pidx].link_speed_supported) 3007 continue; 3008 mask = QSFP_GPIO_MOD_PRS_N; 3009 ppd = dd->pport + pidx; 3010 mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); 3011 if (gpiostatus & dd->cspec->gpio_mask & mask) { 3012 u64 pins; 3013 3014 qd = &ppd->cpspec->qsfp_data; 3015 gpiostatus &= ~mask; 3016 pins = qib_read_kreg64(dd, kr_extstatus); 3017 pins >>= SYM_LSB(EXTStatus, GPIOIn); 3018 if (!(pins & mask)) { 3019 ++handled; 3020 qd->t_insert = jiffies; 3021 queue_work(ib_wq, &qd->work); 3022 } 3023 } 3024 } 3025 3026 if (gpiostatus && !handled) { 3027 const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); 3028 u32 gpio_irq = mask & gpiostatus; 3029 3030 /* 3031 * Clear any troublemakers, and update chip from shadow 3032 */ 3033 dd->cspec->gpio_mask &= ~gpio_irq; 3034 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 3035 } 3036 } 3037 3038 /* 3039 * Handle errors and unusual events first, separate function 3040 * to improve cache hits for fast path interrupt handling. 3041 */ 3042 static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat) 3043 { 3044 if (istat & ~QIB_I_BITSEXTANT) 3045 unknown_7322_ibits(dd, istat); 3046 if (istat & QIB_I_GPIO) 3047 unknown_7322_gpio_intr(dd); 3048 if (istat & QIB_I_C_ERROR) { 3049 qib_write_kreg(dd, kr_errmask, 0ULL); 3050 tasklet_schedule(&dd->error_tasklet); 3051 } 3052 if (istat & INT_MASK_P(Err, 0) && dd->rcd[0]) 3053 handle_7322_p_errors(dd->rcd[0]->ppd); 3054 if (istat & INT_MASK_P(Err, 1) && dd->rcd[1]) 3055 handle_7322_p_errors(dd->rcd[1]->ppd); 3056 } 3057 3058 /* 3059 * Dynamically adjust the rcv int timeout for a context based on incoming 3060 * packet rate. 3061 */ 3062 static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts) 3063 { 3064 struct qib_devdata *dd = rcd->dd; 3065 u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt]; 3066 3067 /* 3068 * Dynamically adjust idle timeout on chip 3069 * based on number of packets processed. 3070 */ 3071 if (npkts < rcv_int_count && timeout > 2) 3072 timeout >>= 1; 3073 else if (npkts >= rcv_int_count && timeout < rcv_int_timeout) 3074 timeout = min(timeout << 1, rcv_int_timeout); 3075 else 3076 return; 3077 3078 dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout; 3079 qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout); 3080 } 3081 3082 /* 3083 * This is the main interrupt handler. 3084 * It will normally only be used for low frequency interrupts but may 3085 * have to handle all interrupts if INTx is enabled or fewer than normal 3086 * MSIx interrupts were allocated. 3087 * This routine should ignore the interrupt bits for any of the 3088 * dedicated MSIx handlers. 3089 */ 3090 static irqreturn_t qib_7322intr(int irq, void *data) 3091 { 3092 struct qib_devdata *dd = data; 3093 irqreturn_t ret; 3094 u64 istat; 3095 u64 ctxtrbits; 3096 u64 rmask; 3097 unsigned i; 3098 u32 npkts; 3099 3100 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { 3101 /* 3102 * This return value is not great, but we do not want the 3103 * interrupt core code to remove our interrupt handler 3104 * because we don't appear to be handling an interrupt 3105 * during a chip reset. 3106 */ 3107 ret = IRQ_HANDLED; 3108 goto bail; 3109 } 3110 3111 istat = qib_read_kreg64(dd, kr_intstatus); 3112 3113 if (unlikely(istat == ~0ULL)) { 3114 qib_bad_intrstatus(dd); 3115 qib_dev_err(dd, "Interrupt status all f's, skipping\n"); 3116 /* don't know if it was our interrupt or not */ 3117 ret = IRQ_NONE; 3118 goto bail; 3119 } 3120 3121 istat &= dd->cspec->main_int_mask; 3122 if (unlikely(!istat)) { 3123 /* already handled, or shared and not us */ 3124 ret = IRQ_NONE; 3125 goto bail; 3126 } 3127 3128 this_cpu_inc(*dd->int_counter); 3129 3130 /* handle "errors" of various kinds first, device ahead of port */ 3131 if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO | 3132 QIB_I_C_ERROR | INT_MASK_P(Err, 0) | 3133 INT_MASK_P(Err, 1)))) 3134 unlikely_7322_intr(dd, istat); 3135 3136 /* 3137 * Clear the interrupt bits we found set, relatively early, so we 3138 * "know" know the chip will have seen this by the time we process 3139 * the queue, and will re-interrupt if necessary. The processor 3140 * itself won't take the interrupt again until we return. 3141 */ 3142 qib_write_kreg(dd, kr_intclear, istat); 3143 3144 /* 3145 * Handle kernel receive queues before checking for pio buffers 3146 * available since receives can overflow; piobuf waiters can afford 3147 * a few extra cycles, since they were waiting anyway. 3148 */ 3149 ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK); 3150 if (ctxtrbits) { 3151 rmask = (1ULL << QIB_I_RCVAVAIL_LSB) | 3152 (1ULL << QIB_I_RCVURG_LSB); 3153 for (i = 0; i < dd->first_user_ctxt; i++) { 3154 if (ctxtrbits & rmask) { 3155 ctxtrbits &= ~rmask; 3156 if (dd->rcd[i]) 3157 qib_kreceive(dd->rcd[i], NULL, &npkts); 3158 } 3159 rmask <<= 1; 3160 } 3161 if (ctxtrbits) { 3162 ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) | 3163 (ctxtrbits >> QIB_I_RCVURG_LSB); 3164 qib_handle_urcv(dd, ctxtrbits); 3165 } 3166 } 3167 3168 if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1))) 3169 sdma_7322_intr(dd, istat); 3170 3171 if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) 3172 qib_ib_piobufavail(dd); 3173 3174 ret = IRQ_HANDLED; 3175 bail: 3176 return ret; 3177 } 3178 3179 /* 3180 * Dedicated receive packet available interrupt handler. 3181 */ 3182 static irqreturn_t qib_7322pintr(int irq, void *data) 3183 { 3184 struct qib_ctxtdata *rcd = data; 3185 struct qib_devdata *dd = rcd->dd; 3186 u32 npkts; 3187 3188 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3189 /* 3190 * This return value is not great, but we do not want the 3191 * interrupt core code to remove our interrupt handler 3192 * because we don't appear to be handling an interrupt 3193 * during a chip reset. 3194 */ 3195 return IRQ_HANDLED; 3196 3197 this_cpu_inc(*dd->int_counter); 3198 3199 /* Clear the interrupt bit we expect to be set. */ 3200 qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) | 3201 (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt); 3202 3203 qib_kreceive(rcd, NULL, &npkts); 3204 3205 return IRQ_HANDLED; 3206 } 3207 3208 /* 3209 * Dedicated Send buffer available interrupt handler. 3210 */ 3211 static irqreturn_t qib_7322bufavail(int irq, void *data) 3212 { 3213 struct qib_devdata *dd = data; 3214 3215 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3216 /* 3217 * This return value is not great, but we do not want the 3218 * interrupt core code to remove our interrupt handler 3219 * because we don't appear to be handling an interrupt 3220 * during a chip reset. 3221 */ 3222 return IRQ_HANDLED; 3223 3224 this_cpu_inc(*dd->int_counter); 3225 3226 /* Clear the interrupt bit we expect to be set. */ 3227 qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL); 3228 3229 /* qib_ib_piobufavail() will clear the want PIO interrupt if needed */ 3230 if (dd->flags & QIB_INITTED) 3231 qib_ib_piobufavail(dd); 3232 else 3233 qib_wantpiobuf_7322_intr(dd, 0); 3234 3235 return IRQ_HANDLED; 3236 } 3237 3238 /* 3239 * Dedicated Send DMA interrupt handler. 3240 */ 3241 static irqreturn_t sdma_intr(int irq, void *data) 3242 { 3243 struct qib_pportdata *ppd = data; 3244 struct qib_devdata *dd = ppd->dd; 3245 3246 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3247 /* 3248 * This return value is not great, but we do not want the 3249 * interrupt core code to remove our interrupt handler 3250 * because we don't appear to be handling an interrupt 3251 * during a chip reset. 3252 */ 3253 return IRQ_HANDLED; 3254 3255 this_cpu_inc(*dd->int_counter); 3256 3257 /* Clear the interrupt bit we expect to be set. */ 3258 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3259 INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0)); 3260 qib_sdma_intr(ppd); 3261 3262 return IRQ_HANDLED; 3263 } 3264 3265 /* 3266 * Dedicated Send DMA idle interrupt handler. 3267 */ 3268 static irqreturn_t sdma_idle_intr(int irq, void *data) 3269 { 3270 struct qib_pportdata *ppd = data; 3271 struct qib_devdata *dd = ppd->dd; 3272 3273 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3274 /* 3275 * This return value is not great, but we do not want the 3276 * interrupt core code to remove our interrupt handler 3277 * because we don't appear to be handling an interrupt 3278 * during a chip reset. 3279 */ 3280 return IRQ_HANDLED; 3281 3282 this_cpu_inc(*dd->int_counter); 3283 3284 /* Clear the interrupt bit we expect to be set. */ 3285 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3286 INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0)); 3287 qib_sdma_intr(ppd); 3288 3289 return IRQ_HANDLED; 3290 } 3291 3292 /* 3293 * Dedicated Send DMA progress interrupt handler. 3294 */ 3295 static irqreturn_t sdma_progress_intr(int irq, void *data) 3296 { 3297 struct qib_pportdata *ppd = data; 3298 struct qib_devdata *dd = ppd->dd; 3299 3300 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3301 /* 3302 * This return value is not great, but we do not want the 3303 * interrupt core code to remove our interrupt handler 3304 * because we don't appear to be handling an interrupt 3305 * during a chip reset. 3306 */ 3307 return IRQ_HANDLED; 3308 3309 this_cpu_inc(*dd->int_counter); 3310 3311 /* Clear the interrupt bit we expect to be set. */ 3312 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3313 INT_MASK_P(SDmaProgress, 1) : 3314 INT_MASK_P(SDmaProgress, 0)); 3315 qib_sdma_intr(ppd); 3316 3317 return IRQ_HANDLED; 3318 } 3319 3320 /* 3321 * Dedicated Send DMA cleanup interrupt handler. 3322 */ 3323 static irqreturn_t sdma_cleanup_intr(int irq, void *data) 3324 { 3325 struct qib_pportdata *ppd = data; 3326 struct qib_devdata *dd = ppd->dd; 3327 3328 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3329 /* 3330 * This return value is not great, but we do not want the 3331 * interrupt core code to remove our interrupt handler 3332 * because we don't appear to be handling an interrupt 3333 * during a chip reset. 3334 */ 3335 return IRQ_HANDLED; 3336 3337 this_cpu_inc(*dd->int_counter); 3338 3339 /* Clear the interrupt bit we expect to be set. */ 3340 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3341 INT_MASK_PM(SDmaCleanupDone, 1) : 3342 INT_MASK_PM(SDmaCleanupDone, 0)); 3343 qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started); 3344 3345 return IRQ_HANDLED; 3346 } 3347 3348 #ifdef CONFIG_INFINIBAND_QIB_DCA 3349 3350 static void reset_dca_notifier(struct qib_devdata *dd, struct qib_msix_entry *m) 3351 { 3352 if (!m->dca) 3353 return; 3354 qib_devinfo(dd->pcidev, 3355 "Disabling notifier on HCA %d irq %d\n", 3356 dd->unit, 3357 m->msix.vector); 3358 irq_set_affinity_notifier( 3359 m->msix.vector, 3360 NULL); 3361 m->notifier = NULL; 3362 } 3363 3364 static void setup_dca_notifier(struct qib_devdata *dd, struct qib_msix_entry *m) 3365 { 3366 struct qib_irq_notify *n; 3367 3368 if (!m->dca) 3369 return; 3370 n = kzalloc(sizeof(*n), GFP_KERNEL); 3371 if (n) { 3372 int ret; 3373 3374 m->notifier = n; 3375 n->notify.irq = m->msix.vector; 3376 n->notify.notify = qib_irq_notifier_notify; 3377 n->notify.release = qib_irq_notifier_release; 3378 n->arg = m->arg; 3379 n->rcv = m->rcv; 3380 qib_devinfo(dd->pcidev, 3381 "set notifier irq %d rcv %d notify %p\n", 3382 n->notify.irq, n->rcv, &n->notify); 3383 ret = irq_set_affinity_notifier( 3384 n->notify.irq, 3385 &n->notify); 3386 if (ret) { 3387 m->notifier = NULL; 3388 kfree(n); 3389 } 3390 } 3391 } 3392 3393 #endif 3394 3395 /* 3396 * Set up our chip-specific interrupt handler. 3397 * The interrupt type has already been setup, so 3398 * we just need to do the registration and error checking. 3399 * If we are using MSIx interrupts, we may fall back to 3400 * INTx later, if the interrupt handler doesn't get called 3401 * within 1/2 second (see verify_interrupt()). 3402 */ 3403 static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend) 3404 { 3405 int ret, i, msixnum; 3406 u64 redirect[6]; 3407 u64 mask; 3408 const struct cpumask *local_mask; 3409 int firstcpu, secondcpu = 0, currrcvcpu = 0; 3410 3411 if (!dd->num_pports) 3412 return; 3413 3414 if (clearpend) { 3415 /* 3416 * if not switching interrupt types, be sure interrupts are 3417 * disabled, and then clear anything pending at this point, 3418 * because we are starting clean. 3419 */ 3420 qib_7322_set_intr_state(dd, 0); 3421 3422 /* clear the reset error, init error/hwerror mask */ 3423 qib_7322_init_hwerrors(dd); 3424 3425 /* clear any interrupt bits that might be set */ 3426 qib_write_kreg(dd, kr_intclear, ~0ULL); 3427 3428 /* make sure no pending MSIx intr, and clear diag reg */ 3429 qib_write_kreg(dd, kr_intgranted, ~0ULL); 3430 qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL); 3431 } 3432 3433 if (!dd->cspec->num_msix_entries) { 3434 /* Try to get INTx interrupt */ 3435 try_intx: 3436 if (!dd->pcidev->irq) { 3437 qib_dev_err(dd, 3438 "irq is 0, BIOS error? Interrupts won't work\n"); 3439 goto bail; 3440 } 3441 ret = request_irq(dd->pcidev->irq, qib_7322intr, 3442 IRQF_SHARED, QIB_DRV_NAME, dd); 3443 if (ret) { 3444 qib_dev_err(dd, 3445 "Couldn't setup INTx interrupt (irq=%d): %d\n", 3446 dd->pcidev->irq, ret); 3447 goto bail; 3448 } 3449 dd->cspec->irq = dd->pcidev->irq; 3450 dd->cspec->main_int_mask = ~0ULL; 3451 goto bail; 3452 } 3453 3454 /* Try to get MSIx interrupts */ 3455 memset(redirect, 0, sizeof(redirect)); 3456 mask = ~0ULL; 3457 msixnum = 0; 3458 local_mask = cpumask_of_pcibus(dd->pcidev->bus); 3459 firstcpu = cpumask_first(local_mask); 3460 if (firstcpu >= nr_cpu_ids || 3461 cpumask_weight(local_mask) == num_online_cpus()) { 3462 local_mask = topology_core_cpumask(0); 3463 firstcpu = cpumask_first(local_mask); 3464 } 3465 if (firstcpu < nr_cpu_ids) { 3466 secondcpu = cpumask_next(firstcpu, local_mask); 3467 if (secondcpu >= nr_cpu_ids) 3468 secondcpu = firstcpu; 3469 currrcvcpu = secondcpu; 3470 } 3471 for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) { 3472 irq_handler_t handler; 3473 void *arg; 3474 u64 val; 3475 int lsb, reg, sh; 3476 #ifdef CONFIG_INFINIBAND_QIB_DCA 3477 int dca = 0; 3478 #endif 3479 3480 dd->cspec->msix_entries[msixnum]. 3481 name[sizeof(dd->cspec->msix_entries[msixnum].name) - 1] 3482 = '\0'; 3483 if (i < ARRAY_SIZE(irq_table)) { 3484 if (irq_table[i].port) { 3485 /* skip if for a non-configured port */ 3486 if (irq_table[i].port > dd->num_pports) 3487 continue; 3488 arg = dd->pport + irq_table[i].port - 1; 3489 } else 3490 arg = dd; 3491 #ifdef CONFIG_INFINIBAND_QIB_DCA 3492 dca = irq_table[i].dca; 3493 #endif 3494 lsb = irq_table[i].lsb; 3495 handler = irq_table[i].handler; 3496 snprintf(dd->cspec->msix_entries[msixnum].name, 3497 sizeof(dd->cspec->msix_entries[msixnum].name) 3498 - 1, 3499 QIB_DRV_NAME "%d%s", dd->unit, 3500 irq_table[i].name); 3501 } else { 3502 unsigned ctxt; 3503 3504 ctxt = i - ARRAY_SIZE(irq_table); 3505 /* per krcvq context receive interrupt */ 3506 arg = dd->rcd[ctxt]; 3507 if (!arg) 3508 continue; 3509 if (qib_krcvq01_no_msi && ctxt < 2) 3510 continue; 3511 #ifdef CONFIG_INFINIBAND_QIB_DCA 3512 dca = 1; 3513 #endif 3514 lsb = QIB_I_RCVAVAIL_LSB + ctxt; 3515 handler = qib_7322pintr; 3516 snprintf(dd->cspec->msix_entries[msixnum].name, 3517 sizeof(dd->cspec->msix_entries[msixnum].name) 3518 - 1, 3519 QIB_DRV_NAME "%d (kctx)", dd->unit); 3520 } 3521 ret = request_irq( 3522 dd->cspec->msix_entries[msixnum].msix.vector, 3523 handler, 0, dd->cspec->msix_entries[msixnum].name, 3524 arg); 3525 if (ret) { 3526 /* 3527 * Shouldn't happen since the enable said we could 3528 * have as many as we are trying to setup here. 3529 */ 3530 qib_dev_err(dd, 3531 "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n", 3532 msixnum, 3533 dd->cspec->msix_entries[msixnum].msix.vector, 3534 ret); 3535 qib_7322_nomsix(dd); 3536 goto try_intx; 3537 } 3538 dd->cspec->msix_entries[msixnum].arg = arg; 3539 #ifdef CONFIG_INFINIBAND_QIB_DCA 3540 dd->cspec->msix_entries[msixnum].dca = dca; 3541 dd->cspec->msix_entries[msixnum].rcv = 3542 handler == qib_7322pintr; 3543 #endif 3544 if (lsb >= 0) { 3545 reg = lsb / IBA7322_REDIRECT_VEC_PER_REG; 3546 sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) * 3547 SYM_LSB(IntRedirect0, vec1); 3548 mask &= ~(1ULL << lsb); 3549 redirect[reg] |= ((u64) msixnum) << sh; 3550 } 3551 val = qib_read_kreg64(dd, 2 * msixnum + 1 + 3552 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3553 if (firstcpu < nr_cpu_ids && 3554 zalloc_cpumask_var( 3555 &dd->cspec->msix_entries[msixnum].mask, 3556 GFP_KERNEL)) { 3557 if (handler == qib_7322pintr) { 3558 cpumask_set_cpu(currrcvcpu, 3559 dd->cspec->msix_entries[msixnum].mask); 3560 currrcvcpu = cpumask_next(currrcvcpu, 3561 local_mask); 3562 if (currrcvcpu >= nr_cpu_ids) 3563 currrcvcpu = secondcpu; 3564 } else { 3565 cpumask_set_cpu(firstcpu, 3566 dd->cspec->msix_entries[msixnum].mask); 3567 } 3568 irq_set_affinity_hint( 3569 dd->cspec->msix_entries[msixnum].msix.vector, 3570 dd->cspec->msix_entries[msixnum].mask); 3571 } 3572 msixnum++; 3573 } 3574 /* Initialize the vector mapping */ 3575 for (i = 0; i < ARRAY_SIZE(redirect); i++) 3576 qib_write_kreg(dd, kr_intredirect + i, redirect[i]); 3577 dd->cspec->main_int_mask = mask; 3578 tasklet_init(&dd->error_tasklet, qib_error_tasklet, 3579 (unsigned long)dd); 3580 bail:; 3581 } 3582 3583 /** 3584 * qib_7322_boardname - fill in the board name and note features 3585 * @dd: the qlogic_ib device 3586 * 3587 * info will be based on the board revision register 3588 */ 3589 static unsigned qib_7322_boardname(struct qib_devdata *dd) 3590 { 3591 /* Will need enumeration of board-types here */ 3592 char *n; 3593 u32 boardid, namelen; 3594 unsigned features = DUAL_PORT_CAP; 3595 3596 boardid = SYM_FIELD(dd->revision, Revision, BoardID); 3597 3598 switch (boardid) { 3599 case 0: 3600 n = "InfiniPath_QLE7342_Emulation"; 3601 break; 3602 case 1: 3603 n = "InfiniPath_QLE7340"; 3604 dd->flags |= QIB_HAS_QSFP; 3605 features = PORT_SPD_CAP; 3606 break; 3607 case 2: 3608 n = "InfiniPath_QLE7342"; 3609 dd->flags |= QIB_HAS_QSFP; 3610 break; 3611 case 3: 3612 n = "InfiniPath_QMI7342"; 3613 break; 3614 case 4: 3615 n = "InfiniPath_Unsupported7342"; 3616 qib_dev_err(dd, "Unsupported version of QMH7342\n"); 3617 features = 0; 3618 break; 3619 case BOARD_QMH7342: 3620 n = "InfiniPath_QMH7342"; 3621 features = 0x24; 3622 break; 3623 case BOARD_QME7342: 3624 n = "InfiniPath_QME7342"; 3625 break; 3626 case 8: 3627 n = "InfiniPath_QME7362"; 3628 dd->flags |= QIB_HAS_QSFP; 3629 break; 3630 case BOARD_QMH7360: 3631 n = "Intel IB QDR 1P FLR-QSFP Adptr"; 3632 dd->flags |= QIB_HAS_QSFP; 3633 break; 3634 case 15: 3635 n = "InfiniPath_QLE7342_TEST"; 3636 dd->flags |= QIB_HAS_QSFP; 3637 break; 3638 default: 3639 n = "InfiniPath_QLE73xy_UNKNOWN"; 3640 qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid); 3641 break; 3642 } 3643 dd->board_atten = 1; /* index into txdds_Xdr */ 3644 3645 namelen = strlen(n) + 1; 3646 dd->boardname = kmalloc(namelen, GFP_KERNEL); 3647 if (!dd->boardname) 3648 qib_dev_err(dd, "Failed allocation for board name: %s\n", n); 3649 else 3650 snprintf(dd->boardname, namelen, "%s", n); 3651 3652 snprintf(dd->boardversion, sizeof(dd->boardversion), 3653 "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", 3654 QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, 3655 (unsigned)SYM_FIELD(dd->revision, Revision_R, Arch), 3656 dd->majrev, dd->minrev, 3657 (unsigned)SYM_FIELD(dd->revision, Revision_R, SW)); 3658 3659 if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) { 3660 qib_devinfo(dd->pcidev, 3661 "IB%u: Forced to single port mode by module parameter\n", 3662 dd->unit); 3663 features &= PORT_SPD_CAP; 3664 } 3665 3666 return features; 3667 } 3668 3669 /* 3670 * This routine sleeps, so it can only be called from user context, not 3671 * from interrupt context. 3672 */ 3673 static int qib_do_7322_reset(struct qib_devdata *dd) 3674 { 3675 u64 val; 3676 u64 *msix_vecsave; 3677 int i, msix_entries, ret = 1; 3678 u16 cmdval; 3679 u8 int_line, clinesz; 3680 unsigned long flags; 3681 3682 /* Use dev_err so it shows up in logs, etc. */ 3683 qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); 3684 3685 qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); 3686 3687 msix_entries = dd->cspec->num_msix_entries; 3688 3689 /* no interrupts till re-initted */ 3690 qib_7322_set_intr_state(dd, 0); 3691 3692 if (msix_entries) { 3693 qib_7322_nomsix(dd); 3694 /* can be up to 512 bytes, too big for stack */ 3695 msix_vecsave = kmalloc(2 * dd->cspec->num_msix_entries * 3696 sizeof(u64), GFP_KERNEL); 3697 if (!msix_vecsave) 3698 qib_dev_err(dd, "No mem to save MSIx data\n"); 3699 } else 3700 msix_vecsave = NULL; 3701 3702 /* 3703 * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector 3704 * info that is set up by the BIOS, so we have to save and restore 3705 * it ourselves. There is some risk something could change it, 3706 * after we save it, but since we have disabled the MSIx, it 3707 * shouldn't be touched... 3708 */ 3709 for (i = 0; i < msix_entries; i++) { 3710 u64 vecaddr, vecdata; 3711 3712 vecaddr = qib_read_kreg64(dd, 2 * i + 3713 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3714 vecdata = qib_read_kreg64(dd, 1 + 2 * i + 3715 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3716 if (msix_vecsave) { 3717 msix_vecsave[2 * i] = vecaddr; 3718 /* save it without the masked bit set */ 3719 msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL; 3720 } 3721 } 3722 3723 dd->pport->cpspec->ibdeltainprog = 0; 3724 dd->pport->cpspec->ibsymdelta = 0; 3725 dd->pport->cpspec->iblnkerrdelta = 0; 3726 dd->pport->cpspec->ibmalfdelta = 0; 3727 /* so we check interrupts work again */ 3728 dd->z_int_counter = qib_int_counter(dd); 3729 3730 /* 3731 * Keep chip from being accessed until we are ready. Use 3732 * writeq() directly, to allow the write even though QIB_PRESENT 3733 * isn't set. 3734 */ 3735 dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); 3736 dd->flags |= QIB_DOING_RESET; 3737 val = dd->control | QLOGIC_IB_C_RESET; 3738 writeq(val, &dd->kregbase[kr_control]); 3739 3740 for (i = 1; i <= 5; i++) { 3741 /* 3742 * Allow MBIST, etc. to complete; longer on each retry. 3743 * We sometimes get machine checks from bus timeout if no 3744 * response, so for now, make it *really* long. 3745 */ 3746 msleep(1000 + (1 + i) * 3000); 3747 3748 qib_pcie_reenable(dd, cmdval, int_line, clinesz); 3749 3750 /* 3751 * Use readq directly, so we don't need to mark it as PRESENT 3752 * until we get a successful indication that all is well. 3753 */ 3754 val = readq(&dd->kregbase[kr_revision]); 3755 if (val == dd->revision) 3756 break; 3757 if (i == 5) { 3758 qib_dev_err(dd, 3759 "Failed to initialize after reset, unusable\n"); 3760 ret = 0; 3761 goto bail; 3762 } 3763 } 3764 3765 dd->flags |= QIB_PRESENT; /* it's back */ 3766 3767 if (msix_entries) { 3768 /* restore the MSIx vector address and data if saved above */ 3769 for (i = 0; i < msix_entries; i++) { 3770 dd->cspec->msix_entries[i].msix.entry = i; 3771 if (!msix_vecsave || !msix_vecsave[2 * i]) 3772 continue; 3773 qib_write_kreg(dd, 2 * i + 3774 (QIB_7322_MsixTable_OFFS / sizeof(u64)), 3775 msix_vecsave[2 * i]); 3776 qib_write_kreg(dd, 1 + 2 * i + 3777 (QIB_7322_MsixTable_OFFS / sizeof(u64)), 3778 msix_vecsave[1 + 2 * i]); 3779 } 3780 } 3781 3782 /* initialize the remaining registers. */ 3783 for (i = 0; i < dd->num_pports; ++i) 3784 write_7322_init_portregs(&dd->pport[i]); 3785 write_7322_initregs(dd); 3786 3787 if (qib_pcie_params(dd, dd->lbus_width, 3788 &dd->cspec->num_msix_entries, 3789 dd->cspec->msix_entries)) 3790 qib_dev_err(dd, 3791 "Reset failed to setup PCIe or interrupts; continuing anyway\n"); 3792 3793 qib_setup_7322_interrupt(dd, 1); 3794 3795 for (i = 0; i < dd->num_pports; ++i) { 3796 struct qib_pportdata *ppd = &dd->pport[i]; 3797 3798 spin_lock_irqsave(&ppd->lflags_lock, flags); 3799 ppd->lflags |= QIBL_IB_FORCE_NOTIFY; 3800 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 3801 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 3802 } 3803 3804 bail: 3805 dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */ 3806 kfree(msix_vecsave); 3807 return ret; 3808 } 3809 3810 /** 3811 * qib_7322_put_tid - write a TID to the chip 3812 * @dd: the qlogic_ib device 3813 * @tidptr: pointer to the expected TID (in chip) to update 3814 * @tidtype: 0 for eager, 1 for expected 3815 * @pa: physical address of in memory buffer; tidinvalid if freeing 3816 */ 3817 static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, 3818 u32 type, unsigned long pa) 3819 { 3820 if (!(dd->flags & QIB_PRESENT)) 3821 return; 3822 if (pa != dd->tidinvalid) { 3823 u64 chippa = pa >> IBA7322_TID_PA_SHIFT; 3824 3825 /* paranoia checks */ 3826 if (pa != (chippa << IBA7322_TID_PA_SHIFT)) { 3827 qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", 3828 pa); 3829 return; 3830 } 3831 if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) { 3832 qib_dev_err(dd, 3833 "Physical page address 0x%lx larger than supported\n", 3834 pa); 3835 return; 3836 } 3837 3838 if (type == RCVHQ_RCV_TYPE_EAGER) 3839 chippa |= dd->tidtemplate; 3840 else /* for now, always full 4KB page */ 3841 chippa |= IBA7322_TID_SZ_4K; 3842 pa = chippa; 3843 } 3844 writeq(pa, tidptr); 3845 mmiowb(); 3846 } 3847 3848 /** 3849 * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager 3850 * @dd: the qlogic_ib device 3851 * @ctxt: the ctxt 3852 * 3853 * clear all TID entries for a ctxt, expected and eager. 3854 * Used from qib_close(). 3855 */ 3856 static void qib_7322_clear_tids(struct qib_devdata *dd, 3857 struct qib_ctxtdata *rcd) 3858 { 3859 u64 __iomem *tidbase; 3860 unsigned long tidinv; 3861 u32 ctxt; 3862 int i; 3863 3864 if (!dd->kregbase || !rcd) 3865 return; 3866 3867 ctxt = rcd->ctxt; 3868 3869 tidinv = dd->tidinvalid; 3870 tidbase = (u64 __iomem *) 3871 ((char __iomem *) dd->kregbase + 3872 dd->rcvtidbase + 3873 ctxt * dd->rcvtidcnt * sizeof(*tidbase)); 3874 3875 for (i = 0; i < dd->rcvtidcnt; i++) 3876 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, 3877 tidinv); 3878 3879 tidbase = (u64 __iomem *) 3880 ((char __iomem *) dd->kregbase + 3881 dd->rcvegrbase + 3882 rcd->rcvegr_tid_base * sizeof(*tidbase)); 3883 3884 for (i = 0; i < rcd->rcvegrcnt; i++) 3885 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, 3886 tidinv); 3887 } 3888 3889 /** 3890 * qib_7322_tidtemplate - setup constants for TID updates 3891 * @dd: the qlogic_ib device 3892 * 3893 * We setup stuff that we use a lot, to avoid calculating each time 3894 */ 3895 static void qib_7322_tidtemplate(struct qib_devdata *dd) 3896 { 3897 /* 3898 * For now, we always allocate 4KB buffers (at init) so we can 3899 * receive max size packets. We may want a module parameter to 3900 * specify 2KB or 4KB and/or make it per port instead of per device 3901 * for those who want to reduce memory footprint. Note that the 3902 * rcvhdrentsize size must be large enough to hold the largest 3903 * IB header (currently 96 bytes) that we expect to handle (plus of 3904 * course the 2 dwords of RHF). 3905 */ 3906 if (dd->rcvegrbufsize == 2048) 3907 dd->tidtemplate = IBA7322_TID_SZ_2K; 3908 else if (dd->rcvegrbufsize == 4096) 3909 dd->tidtemplate = IBA7322_TID_SZ_4K; 3910 dd->tidinvalid = 0; 3911 } 3912 3913 /** 3914 * qib_init_7322_get_base_info - set chip-specific flags for user code 3915 * @rcd: the qlogic_ib ctxt 3916 * @kbase: qib_base_info pointer 3917 * 3918 * We set the PCIE flag because the lower bandwidth on PCIe vs 3919 * HyperTransport can affect some user packet algorithims. 3920 */ 3921 3922 static int qib_7322_get_base_info(struct qib_ctxtdata *rcd, 3923 struct qib_base_info *kinfo) 3924 { 3925 kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP | 3926 QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL | 3927 QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA; 3928 if (rcd->dd->cspec->r1) 3929 kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK; 3930 if (rcd->dd->flags & QIB_USE_SPCL_TRIG) 3931 kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER; 3932 3933 return 0; 3934 } 3935 3936 static struct qib_message_header * 3937 qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) 3938 { 3939 u32 offset = qib_hdrget_offset(rhf_addr); 3940 3941 return (struct qib_message_header *) 3942 (rhf_addr - dd->rhf_offset + offset); 3943 } 3944 3945 /* 3946 * Configure number of contexts. 3947 */ 3948 static void qib_7322_config_ctxts(struct qib_devdata *dd) 3949 { 3950 unsigned long flags; 3951 u32 nchipctxts; 3952 3953 nchipctxts = qib_read_kreg32(dd, kr_contextcnt); 3954 dd->cspec->numctxts = nchipctxts; 3955 if (qib_n_krcv_queues > 1 && dd->num_pports) { 3956 dd->first_user_ctxt = NUM_IB_PORTS + 3957 (qib_n_krcv_queues - 1) * dd->num_pports; 3958 if (dd->first_user_ctxt > nchipctxts) 3959 dd->first_user_ctxt = nchipctxts; 3960 dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports; 3961 } else { 3962 dd->first_user_ctxt = NUM_IB_PORTS; 3963 dd->n_krcv_queues = 1; 3964 } 3965 3966 if (!qib_cfgctxts) { 3967 int nctxts = dd->first_user_ctxt + num_online_cpus(); 3968 3969 if (nctxts <= 6) 3970 dd->ctxtcnt = 6; 3971 else if (nctxts <= 10) 3972 dd->ctxtcnt = 10; 3973 else if (nctxts <= nchipctxts) 3974 dd->ctxtcnt = nchipctxts; 3975 } else if (qib_cfgctxts < dd->num_pports) 3976 dd->ctxtcnt = dd->num_pports; 3977 else if (qib_cfgctxts <= nchipctxts) 3978 dd->ctxtcnt = qib_cfgctxts; 3979 if (!dd->ctxtcnt) /* none of the above, set to max */ 3980 dd->ctxtcnt = nchipctxts; 3981 3982 /* 3983 * Chip can be configured for 6, 10, or 18 ctxts, and choice 3984 * affects number of eager TIDs per ctxt (1K, 2K, 4K). 3985 * Lock to be paranoid about later motion, etc. 3986 */ 3987 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 3988 if (dd->ctxtcnt > 10) 3989 dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg); 3990 else if (dd->ctxtcnt > 6) 3991 dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg); 3992 /* else configure for default 6 receive ctxts */ 3993 3994 /* The XRC opcode is 5. */ 3995 dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode); 3996 3997 /* 3998 * RcvCtrl *must* be written here so that the 3999 * chip understands how to change rcvegrcnt below. 4000 */ 4001 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); 4002 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 4003 4004 /* kr_rcvegrcnt changes based on the number of contexts enabled */ 4005 dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); 4006 if (qib_rcvhdrcnt) 4007 dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, qib_rcvhdrcnt); 4008 else 4009 dd->rcvhdrcnt = 2 * max(dd->cspec->rcvegrcnt, 4010 dd->num_pports > 1 ? 1024U : 2048U); 4011 } 4012 4013 static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which) 4014 { 4015 4016 int lsb, ret = 0; 4017 u64 maskr; /* right-justified mask */ 4018 4019 switch (which) { 4020 4021 case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */ 4022 ret = ppd->link_width_enabled; 4023 goto done; 4024 4025 case QIB_IB_CFG_LWID: /* Get currently active Link-width */ 4026 ret = ppd->link_width_active; 4027 goto done; 4028 4029 case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */ 4030 ret = ppd->link_speed_enabled; 4031 goto done; 4032 4033 case QIB_IB_CFG_SPD: /* Get current Link spd */ 4034 ret = ppd->link_speed_active; 4035 goto done; 4036 4037 case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */ 4038 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4039 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4040 break; 4041 4042 case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */ 4043 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4044 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4045 break; 4046 4047 case QIB_IB_CFG_LINKLATENCY: 4048 ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) & 4049 SYM_MASK(IBCStatusB_0, LinkRoundTripLatency); 4050 goto done; 4051 4052 case QIB_IB_CFG_OP_VLS: 4053 ret = ppd->vls_operational; 4054 goto done; 4055 4056 case QIB_IB_CFG_VL_HIGH_CAP: 4057 ret = 16; 4058 goto done; 4059 4060 case QIB_IB_CFG_VL_LOW_CAP: 4061 ret = 16; 4062 goto done; 4063 4064 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ 4065 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4066 OverrunThreshold); 4067 goto done; 4068 4069 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ 4070 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4071 PhyerrThreshold); 4072 goto done; 4073 4074 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ 4075 /* will only take effect when the link state changes */ 4076 ret = (ppd->cpspec->ibcctrl_a & 4077 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ? 4078 IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; 4079 goto done; 4080 4081 case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ 4082 lsb = IBA7322_IBC_HRTBT_LSB; 4083 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ 4084 break; 4085 4086 case QIB_IB_CFG_PMA_TICKS: 4087 /* 4088 * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs 4089 * Since the clock is always 250MHz, the value is 3, 1 or 0. 4090 */ 4091 if (ppd->link_speed_active == QIB_IB_QDR) 4092 ret = 3; 4093 else if (ppd->link_speed_active == QIB_IB_DDR) 4094 ret = 1; 4095 else 4096 ret = 0; 4097 goto done; 4098 4099 default: 4100 ret = -EINVAL; 4101 goto done; 4102 } 4103 ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr); 4104 done: 4105 return ret; 4106 } 4107 4108 /* 4109 * Below again cribbed liberally from older version. Do not lean 4110 * heavily on it. 4111 */ 4112 #define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB 4113 #define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \ 4114 | (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16)) 4115 4116 static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) 4117 { 4118 struct qib_devdata *dd = ppd->dd; 4119 u64 maskr; /* right-justified mask */ 4120 int lsb, ret = 0; 4121 u16 lcmd, licmd; 4122 unsigned long flags; 4123 4124 switch (which) { 4125 case QIB_IB_CFG_LIDLMC: 4126 /* 4127 * Set LID and LMC. Combined to avoid possible hazard 4128 * caller puts LMC in 16MSbits, DLID in 16LSbits of val 4129 */ 4130 lsb = IBA7322_IBC_DLIDLMC_SHIFT; 4131 maskr = IBA7322_IBC_DLIDLMC_MASK; 4132 /* 4133 * For header-checking, the SLID in the packet will 4134 * be masked with SendIBSLMCMask, and compared 4135 * with SendIBSLIDAssignMask. Make sure we do not 4136 * set any bits not covered by the mask, or we get 4137 * false-positives. 4138 */ 4139 qib_write_kreg_port(ppd, krp_sendslid, 4140 val & (val >> 16) & SendIBSLIDAssignMask); 4141 qib_write_kreg_port(ppd, krp_sendslidmask, 4142 (val >> 16) & SendIBSLMCMask); 4143 break; 4144 4145 case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */ 4146 ppd->link_width_enabled = val; 4147 /* convert IB value to chip register value */ 4148 if (val == IB_WIDTH_1X) 4149 val = 0; 4150 else if (val == IB_WIDTH_4X) 4151 val = 1; 4152 else 4153 val = 3; 4154 maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS); 4155 lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS); 4156 break; 4157 4158 case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */ 4159 /* 4160 * As with width, only write the actual register if the 4161 * link is currently down, otherwise takes effect on next 4162 * link change. Since setting is being explicitly requested 4163 * (via MAD or sysfs), clear autoneg failure status if speed 4164 * autoneg is enabled. 4165 */ 4166 ppd->link_speed_enabled = val; 4167 val <<= IBA7322_IBC_SPEED_LSB; 4168 maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK | 4169 IBA7322_IBC_MAX_SPEED_MASK; 4170 if (val & (val - 1)) { 4171 /* Muliple speeds enabled */ 4172 val |= IBA7322_IBC_IBTA_1_2_MASK | 4173 IBA7322_IBC_MAX_SPEED_MASK; 4174 spin_lock_irqsave(&ppd->lflags_lock, flags); 4175 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 4176 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 4177 } else if (val & IBA7322_IBC_SPEED_QDR) 4178 val |= IBA7322_IBC_IBTA_1_2_MASK; 4179 /* IBTA 1.2 mode + min/max + speed bits are contiguous */ 4180 lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE); 4181 break; 4182 4183 case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */ 4184 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4185 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4186 break; 4187 4188 case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */ 4189 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4190 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4191 break; 4192 4193 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ 4194 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4195 OverrunThreshold); 4196 if (maskr != val) { 4197 ppd->cpspec->ibcctrl_a &= 4198 ~SYM_MASK(IBCCtrlA_0, OverrunThreshold); 4199 ppd->cpspec->ibcctrl_a |= (u64) val << 4200 SYM_LSB(IBCCtrlA_0, OverrunThreshold); 4201 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4202 ppd->cpspec->ibcctrl_a); 4203 qib_write_kreg(dd, kr_scratch, 0ULL); 4204 } 4205 goto bail; 4206 4207 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ 4208 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4209 PhyerrThreshold); 4210 if (maskr != val) { 4211 ppd->cpspec->ibcctrl_a &= 4212 ~SYM_MASK(IBCCtrlA_0, PhyerrThreshold); 4213 ppd->cpspec->ibcctrl_a |= (u64) val << 4214 SYM_LSB(IBCCtrlA_0, PhyerrThreshold); 4215 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4216 ppd->cpspec->ibcctrl_a); 4217 qib_write_kreg(dd, kr_scratch, 0ULL); 4218 } 4219 goto bail; 4220 4221 case QIB_IB_CFG_PKEYS: /* update pkeys */ 4222 maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | 4223 ((u64) ppd->pkeys[2] << 32) | 4224 ((u64) ppd->pkeys[3] << 48); 4225 qib_write_kreg_port(ppd, krp_partitionkey, maskr); 4226 goto bail; 4227 4228 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ 4229 /* will only take effect when the link state changes */ 4230 if (val == IB_LINKINITCMD_POLL) 4231 ppd->cpspec->ibcctrl_a &= 4232 ~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); 4233 else /* SLEEP */ 4234 ppd->cpspec->ibcctrl_a |= 4235 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); 4236 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 4237 qib_write_kreg(dd, kr_scratch, 0ULL); 4238 goto bail; 4239 4240 case QIB_IB_CFG_MTU: /* update the MTU in IBC */ 4241 /* 4242 * Update our housekeeping variables, and set IBC max 4243 * size, same as init code; max IBC is max we allow in 4244 * buffer, less the qword pbc, plus 1 for ICRC, in dwords 4245 * Set even if it's unchanged, print debug message only 4246 * on changes. 4247 */ 4248 val = (ppd->ibmaxlen >> 2) + 1; 4249 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen); 4250 ppd->cpspec->ibcctrl_a |= (u64)val << 4251 SYM_LSB(IBCCtrlA_0, MaxPktLen); 4252 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4253 ppd->cpspec->ibcctrl_a); 4254 qib_write_kreg(dd, kr_scratch, 0ULL); 4255 goto bail; 4256 4257 case QIB_IB_CFG_LSTATE: /* set the IB link state */ 4258 switch (val & 0xffff0000) { 4259 case IB_LINKCMD_DOWN: 4260 lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; 4261 ppd->cpspec->ibmalfusesnap = 1; 4262 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, 4263 crp_errlink); 4264 if (!ppd->cpspec->ibdeltainprog && 4265 qib_compat_ddr_negotiate) { 4266 ppd->cpspec->ibdeltainprog = 1; 4267 ppd->cpspec->ibsymsnap = 4268 read_7322_creg32_port(ppd, 4269 crp_ibsymbolerr); 4270 ppd->cpspec->iblnkerrsnap = 4271 read_7322_creg32_port(ppd, 4272 crp_iblinkerrrecov); 4273 } 4274 break; 4275 4276 case IB_LINKCMD_ARMED: 4277 lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; 4278 if (ppd->cpspec->ibmalfusesnap) { 4279 ppd->cpspec->ibmalfusesnap = 0; 4280 ppd->cpspec->ibmalfdelta += 4281 read_7322_creg32_port(ppd, 4282 crp_errlink) - 4283 ppd->cpspec->ibmalfsnap; 4284 } 4285 break; 4286 4287 case IB_LINKCMD_ACTIVE: 4288 lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; 4289 break; 4290 4291 default: 4292 ret = -EINVAL; 4293 qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); 4294 goto bail; 4295 } 4296 switch (val & 0xffff) { 4297 case IB_LINKINITCMD_NOP: 4298 licmd = 0; 4299 break; 4300 4301 case IB_LINKINITCMD_POLL: 4302 licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; 4303 break; 4304 4305 case IB_LINKINITCMD_SLEEP: 4306 licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; 4307 break; 4308 4309 case IB_LINKINITCMD_DISABLE: 4310 licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; 4311 ppd->cpspec->chase_end = 0; 4312 /* 4313 * stop state chase counter and timer, if running. 4314 * wait forpending timer, but don't clear .data (ppd)! 4315 */ 4316 if (ppd->cpspec->chase_timer.expires) { 4317 del_timer_sync(&ppd->cpspec->chase_timer); 4318 ppd->cpspec->chase_timer.expires = 0; 4319 } 4320 break; 4321 4322 default: 4323 ret = -EINVAL; 4324 qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", 4325 val & 0xffff); 4326 goto bail; 4327 } 4328 qib_set_ib_7322_lstate(ppd, lcmd, licmd); 4329 goto bail; 4330 4331 case QIB_IB_CFG_OP_VLS: 4332 if (ppd->vls_operational != val) { 4333 ppd->vls_operational = val; 4334 set_vls(ppd); 4335 } 4336 goto bail; 4337 4338 case QIB_IB_CFG_VL_HIGH_LIMIT: 4339 qib_write_kreg_port(ppd, krp_highprio_limit, val); 4340 goto bail; 4341 4342 case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */ 4343 if (val > 3) { 4344 ret = -EINVAL; 4345 goto bail; 4346 } 4347 lsb = IBA7322_IBC_HRTBT_LSB; 4348 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ 4349 break; 4350 4351 case QIB_IB_CFG_PORT: 4352 /* val is the port number of the switch we are connected to. */ 4353 if (ppd->dd->cspec->r1) { 4354 cancel_delayed_work(&ppd->cpspec->ipg_work); 4355 ppd->cpspec->ipg_tries = 0; 4356 } 4357 goto bail; 4358 4359 default: 4360 ret = -EINVAL; 4361 goto bail; 4362 } 4363 ppd->cpspec->ibcctrl_b &= ~(maskr << lsb); 4364 ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb); 4365 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 4366 qib_write_kreg(dd, kr_scratch, 0); 4367 bail: 4368 return ret; 4369 } 4370 4371 static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what) 4372 { 4373 int ret = 0; 4374 u64 val, ctrlb; 4375 4376 /* only IBC loopback, may add serdes and xgxs loopbacks later */ 4377 if (!strncmp(what, "ibc", 3)) { 4378 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, 4379 Loopback); 4380 val = 0; /* disable heart beat, so link will come up */ 4381 qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", 4382 ppd->dd->unit, ppd->port); 4383 } else if (!strncmp(what, "off", 3)) { 4384 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, 4385 Loopback); 4386 /* enable heart beat again */ 4387 val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB; 4388 qib_devinfo(ppd->dd->pcidev, 4389 "Disabling IB%u:%u IBC loopback (normal)\n", 4390 ppd->dd->unit, ppd->port); 4391 } else 4392 ret = -EINVAL; 4393 if (!ret) { 4394 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4395 ppd->cpspec->ibcctrl_a); 4396 ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK 4397 << IBA7322_IBC_HRTBT_LSB); 4398 ppd->cpspec->ibcctrl_b = ctrlb | val; 4399 qib_write_kreg_port(ppd, krp_ibcctrl_b, 4400 ppd->cpspec->ibcctrl_b); 4401 qib_write_kreg(ppd->dd, kr_scratch, 0); 4402 } 4403 return ret; 4404 } 4405 4406 static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno, 4407 struct ib_vl_weight_elem *vl) 4408 { 4409 unsigned i; 4410 4411 for (i = 0; i < 16; i++, regno++, vl++) { 4412 u32 val = qib_read_kreg_port(ppd, regno); 4413 4414 vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) & 4415 SYM_RMASK(LowPriority0_0, VirtualLane); 4416 vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) & 4417 SYM_RMASK(LowPriority0_0, Weight); 4418 } 4419 } 4420 4421 static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno, 4422 struct ib_vl_weight_elem *vl) 4423 { 4424 unsigned i; 4425 4426 for (i = 0; i < 16; i++, regno++, vl++) { 4427 u64 val; 4428 4429 val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) << 4430 SYM_LSB(LowPriority0_0, VirtualLane)) | 4431 ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) << 4432 SYM_LSB(LowPriority0_0, Weight)); 4433 qib_write_kreg_port(ppd, regno, val); 4434 } 4435 if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) { 4436 struct qib_devdata *dd = ppd->dd; 4437 unsigned long flags; 4438 4439 spin_lock_irqsave(&dd->sendctrl_lock, flags); 4440 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn); 4441 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 4442 qib_write_kreg(dd, kr_scratch, 0); 4443 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 4444 } 4445 } 4446 4447 static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t) 4448 { 4449 switch (which) { 4450 case QIB_IB_TBL_VL_HIGH_ARB: 4451 get_vl_weights(ppd, krp_highprio_0, t); 4452 break; 4453 4454 case QIB_IB_TBL_VL_LOW_ARB: 4455 get_vl_weights(ppd, krp_lowprio_0, t); 4456 break; 4457 4458 default: 4459 return -EINVAL; 4460 } 4461 return 0; 4462 } 4463 4464 static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t) 4465 { 4466 switch (which) { 4467 case QIB_IB_TBL_VL_HIGH_ARB: 4468 set_vl_weights(ppd, krp_highprio_0, t); 4469 break; 4470 4471 case QIB_IB_TBL_VL_LOW_ARB: 4472 set_vl_weights(ppd, krp_lowprio_0, t); 4473 break; 4474 4475 default: 4476 return -EINVAL; 4477 } 4478 return 0; 4479 } 4480 4481 static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd, 4482 u32 updegr, u32 egrhd, u32 npkts) 4483 { 4484 /* 4485 * Need to write timeout register before updating rcvhdrhead to ensure 4486 * that the timer is enabled on reception of a packet. 4487 */ 4488 if (hd >> IBA7322_HDRHEAD_PKTINT_SHIFT) 4489 adjust_rcv_timeout(rcd, npkts); 4490 if (updegr) 4491 qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); 4492 mmiowb(); 4493 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); 4494 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); 4495 mmiowb(); 4496 } 4497 4498 static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd) 4499 { 4500 u32 head, tail; 4501 4502 head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); 4503 if (rcd->rcvhdrtail_kvaddr) 4504 tail = qib_get_rcvhdrtail(rcd); 4505 else 4506 tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); 4507 return head == tail; 4508 } 4509 4510 #define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \ 4511 QIB_RCVCTRL_CTXT_DIS | \ 4512 QIB_RCVCTRL_TIDFLOW_ENB | \ 4513 QIB_RCVCTRL_TIDFLOW_DIS | \ 4514 QIB_RCVCTRL_TAILUPD_ENB | \ 4515 QIB_RCVCTRL_TAILUPD_DIS | \ 4516 QIB_RCVCTRL_INTRAVAIL_ENB | \ 4517 QIB_RCVCTRL_INTRAVAIL_DIS | \ 4518 QIB_RCVCTRL_BP_ENB | \ 4519 QIB_RCVCTRL_BP_DIS) 4520 4521 #define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \ 4522 QIB_RCVCTRL_CTXT_DIS | \ 4523 QIB_RCVCTRL_PKEY_DIS | \ 4524 QIB_RCVCTRL_PKEY_ENB) 4525 4526 /* 4527 * Modify the RCVCTRL register in chip-specific way. This 4528 * is a function because bit positions and (future) register 4529 * location is chip-specifc, but the needed operations are 4530 * generic. <op> is a bit-mask because we often want to 4531 * do multiple modifications. 4532 */ 4533 static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, 4534 int ctxt) 4535 { 4536 struct qib_devdata *dd = ppd->dd; 4537 struct qib_ctxtdata *rcd; 4538 u64 mask, val; 4539 unsigned long flags; 4540 4541 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 4542 4543 if (op & QIB_RCVCTRL_TIDFLOW_ENB) 4544 dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable); 4545 if (op & QIB_RCVCTRL_TIDFLOW_DIS) 4546 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable); 4547 if (op & QIB_RCVCTRL_TAILUPD_ENB) 4548 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); 4549 if (op & QIB_RCVCTRL_TAILUPD_DIS) 4550 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd); 4551 if (op & QIB_RCVCTRL_PKEY_ENB) 4552 ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); 4553 if (op & QIB_RCVCTRL_PKEY_DIS) 4554 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); 4555 if (ctxt < 0) { 4556 mask = (1ULL << dd->ctxtcnt) - 1; 4557 rcd = NULL; 4558 } else { 4559 mask = (1ULL << ctxt); 4560 rcd = dd->rcd[ctxt]; 4561 } 4562 if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) { 4563 ppd->p_rcvctrl |= 4564 (mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); 4565 if (!(dd->flags & QIB_NODMA_RTAIL)) { 4566 op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */ 4567 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); 4568 } 4569 /* Write these registers before the context is enabled. */ 4570 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 4571 rcd->rcvhdrqtailaddr_phys); 4572 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 4573 rcd->rcvhdrq_phys); 4574 rcd->seq_cnt = 1; 4575 } 4576 if (op & QIB_RCVCTRL_CTXT_DIS) 4577 ppd->p_rcvctrl &= 4578 ~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); 4579 if (op & QIB_RCVCTRL_BP_ENB) 4580 dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull); 4581 if (op & QIB_RCVCTRL_BP_DIS) 4582 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull)); 4583 if (op & QIB_RCVCTRL_INTRAVAIL_ENB) 4584 dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail)); 4585 if (op & QIB_RCVCTRL_INTRAVAIL_DIS) 4586 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail)); 4587 /* 4588 * Decide which registers to write depending on the ops enabled. 4589 * Special case is "flush" (no bits set at all) 4590 * which needs to write both. 4591 */ 4592 if (op == 0 || (op & RCVCTRL_COMMON_MODS)) 4593 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); 4594 if (op == 0 || (op & RCVCTRL_PORT_MODS)) 4595 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); 4596 if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) { 4597 /* 4598 * Init the context registers also; if we were 4599 * disabled, tail and head should both be zero 4600 * already from the enable, but since we don't 4601 * know, we have to do it explicitly. 4602 */ 4603 val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); 4604 qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); 4605 4606 /* be sure enabling write seen; hd/tl should be 0 */ 4607 (void) qib_read_kreg32(dd, kr_scratch); 4608 val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); 4609 dd->rcd[ctxt]->head = val; 4610 /* If kctxt, interrupt on next receive. */ 4611 if (ctxt < dd->first_user_ctxt) 4612 val |= dd->rhdrhead_intr_off; 4613 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); 4614 } else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && 4615 dd->rcd[ctxt] && dd->rhdrhead_intr_off) { 4616 /* arm rcv interrupt */ 4617 val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off; 4618 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); 4619 } 4620 if (op & QIB_RCVCTRL_CTXT_DIS) { 4621 unsigned f; 4622 4623 /* Now that the context is disabled, clear these registers. */ 4624 if (ctxt >= 0) { 4625 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0); 4626 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0); 4627 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) 4628 qib_write_ureg(dd, ur_rcvflowtable + f, 4629 TIDFLOW_ERRBITS, ctxt); 4630 } else { 4631 unsigned i; 4632 4633 for (i = 0; i < dd->cfgctxts; i++) { 4634 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, 4635 i, 0); 4636 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0); 4637 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) 4638 qib_write_ureg(dd, ur_rcvflowtable + f, 4639 TIDFLOW_ERRBITS, i); 4640 } 4641 } 4642 } 4643 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 4644 } 4645 4646 /* 4647 * Modify the SENDCTRL register in chip-specific way. This 4648 * is a function where there are multiple such registers with 4649 * slightly different layouts. 4650 * The chip doesn't allow back-to-back sendctrl writes, so write 4651 * the scratch register after writing sendctrl. 4652 * 4653 * Which register is written depends on the operation. 4654 * Most operate on the common register, while 4655 * SEND_ENB and SEND_DIS operate on the per-port ones. 4656 * SEND_ENB is included in common because it can change SPCL_TRIG 4657 */ 4658 #define SENDCTRL_COMMON_MODS (\ 4659 QIB_SENDCTRL_CLEAR | \ 4660 QIB_SENDCTRL_AVAIL_DIS | \ 4661 QIB_SENDCTRL_AVAIL_ENB | \ 4662 QIB_SENDCTRL_AVAIL_BLIP | \ 4663 QIB_SENDCTRL_DISARM | \ 4664 QIB_SENDCTRL_DISARM_ALL | \ 4665 QIB_SENDCTRL_SEND_ENB) 4666 4667 #define SENDCTRL_PORT_MODS (\ 4668 QIB_SENDCTRL_CLEAR | \ 4669 QIB_SENDCTRL_SEND_ENB | \ 4670 QIB_SENDCTRL_SEND_DIS | \ 4671 QIB_SENDCTRL_FLUSH) 4672 4673 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op) 4674 { 4675 struct qib_devdata *dd = ppd->dd; 4676 u64 tmp_dd_sendctrl; 4677 unsigned long flags; 4678 4679 spin_lock_irqsave(&dd->sendctrl_lock, flags); 4680 4681 /* First the dd ones that are "sticky", saved in shadow */ 4682 if (op & QIB_SENDCTRL_CLEAR) 4683 dd->sendctrl = 0; 4684 if (op & QIB_SENDCTRL_AVAIL_DIS) 4685 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4686 else if (op & QIB_SENDCTRL_AVAIL_ENB) { 4687 dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd); 4688 if (dd->flags & QIB_USE_SPCL_TRIG) 4689 dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn); 4690 } 4691 4692 /* Then the ppd ones that are "sticky", saved in shadow */ 4693 if (op & QIB_SENDCTRL_SEND_DIS) 4694 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); 4695 else if (op & QIB_SENDCTRL_SEND_ENB) 4696 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); 4697 4698 if (op & QIB_SENDCTRL_DISARM_ALL) { 4699 u32 i, last; 4700 4701 tmp_dd_sendctrl = dd->sendctrl; 4702 last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 4703 /* 4704 * Disarm any buffers that are not yet launched, 4705 * disabling updates until done. 4706 */ 4707 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4708 for (i = 0; i < last; i++) { 4709 qib_write_kreg(dd, kr_sendctrl, 4710 tmp_dd_sendctrl | 4711 SYM_MASK(SendCtrl, Disarm) | i); 4712 qib_write_kreg(dd, kr_scratch, 0); 4713 } 4714 } 4715 4716 if (op & QIB_SENDCTRL_FLUSH) { 4717 u64 tmp_ppd_sendctrl = ppd->p_sendctrl; 4718 4719 /* 4720 * Now drain all the fifos. The Abort bit should never be 4721 * needed, so for now, at least, we don't use it. 4722 */ 4723 tmp_ppd_sendctrl |= 4724 SYM_MASK(SendCtrl_0, TxeDrainRmFifo) | 4725 SYM_MASK(SendCtrl_0, TxeDrainLaFifo) | 4726 SYM_MASK(SendCtrl_0, TxeBypassIbc); 4727 qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl); 4728 qib_write_kreg(dd, kr_scratch, 0); 4729 } 4730 4731 tmp_dd_sendctrl = dd->sendctrl; 4732 4733 if (op & QIB_SENDCTRL_DISARM) 4734 tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | 4735 ((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) << 4736 SYM_LSB(SendCtrl, DisarmSendBuf)); 4737 if ((op & QIB_SENDCTRL_AVAIL_BLIP) && 4738 (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd))) 4739 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4740 4741 if (op == 0 || (op & SENDCTRL_COMMON_MODS)) { 4742 qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); 4743 qib_write_kreg(dd, kr_scratch, 0); 4744 } 4745 4746 if (op == 0 || (op & SENDCTRL_PORT_MODS)) { 4747 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 4748 qib_write_kreg(dd, kr_scratch, 0); 4749 } 4750 4751 if (op & QIB_SENDCTRL_AVAIL_BLIP) { 4752 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); 4753 qib_write_kreg(dd, kr_scratch, 0); 4754 } 4755 4756 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 4757 4758 if (op & QIB_SENDCTRL_FLUSH) { 4759 u32 v; 4760 /* 4761 * ensure writes have hit chip, then do a few 4762 * more reads, to allow DMA of pioavail registers 4763 * to occur, so in-memory copy is in sync with 4764 * the chip. Not always safe to sleep. 4765 */ 4766 v = qib_read_kreg32(dd, kr_scratch); 4767 qib_write_kreg(dd, kr_scratch, v); 4768 v = qib_read_kreg32(dd, kr_scratch); 4769 qib_write_kreg(dd, kr_scratch, v); 4770 qib_read_kreg32(dd, kr_scratch); 4771 } 4772 } 4773 4774 #define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */ 4775 #define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */ 4776 #define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */ 4777 4778 /** 4779 * qib_portcntr_7322 - read a per-port chip counter 4780 * @ppd: the qlogic_ib pport 4781 * @creg: the counter to read (not a chip offset) 4782 */ 4783 static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg) 4784 { 4785 struct qib_devdata *dd = ppd->dd; 4786 u64 ret = 0ULL; 4787 u16 creg; 4788 /* 0xffff for unimplemented or synthesized counters */ 4789 static const u32 xlator[] = { 4790 [QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG, 4791 [QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG, 4792 [QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount, 4793 [QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount, 4794 [QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount, 4795 [QIBPORTCNTR_SENDSTALL] = crp_sendstall, 4796 [QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG, 4797 [QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount, 4798 [QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount, 4799 [QIBPORTCNTR_RCVEBP] = crp_rcvebp, 4800 [QIBPORTCNTR_RCVOVFL] = crp_rcvovfl, 4801 [QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG, 4802 [QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed for 7322 */ 4803 [QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr, 4804 [QIBPORTCNTR_RXVLERR] = crp_rxvlerr, 4805 [QIBPORTCNTR_ERRICRC] = crp_erricrc, 4806 [QIBPORTCNTR_ERRVCRC] = crp_errvcrc, 4807 [QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc, 4808 [QIBPORTCNTR_BADFORMAT] = crp_badformat, 4809 [QIBPORTCNTR_ERR_RLEN] = crp_err_rlen, 4810 [QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr, 4811 [QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen, 4812 [QIBPORTCNTR_UNSUPVL] = crp_txunsupvl, 4813 [QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl, 4814 [QIBPORTCNTR_ERRLINK] = crp_errlink, 4815 [QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown, 4816 [QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov, 4817 [QIBPORTCNTR_LLI] = crp_locallinkintegrityerr, 4818 [QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt, 4819 [QIBPORTCNTR_ERRPKEY] = crp_errpkey, 4820 /* 4821 * the next 3 aren't really counters, but were implemented 4822 * as counters in older chips, so still get accessed as 4823 * though they were counters from this code. 4824 */ 4825 [QIBPORTCNTR_PSINTERVAL] = krp_psinterval, 4826 [QIBPORTCNTR_PSSTART] = krp_psstart, 4827 [QIBPORTCNTR_PSSTAT] = krp_psstat, 4828 /* pseudo-counter, summed for all ports */ 4829 [QIBPORTCNTR_KHDROVFL] = 0xffff, 4830 }; 4831 4832 if (reg >= ARRAY_SIZE(xlator)) { 4833 qib_devinfo(ppd->dd->pcidev, 4834 "Unimplemented portcounter %u\n", reg); 4835 goto done; 4836 } 4837 creg = xlator[reg] & _PORT_CNTR_IDXMASK; 4838 4839 /* handle non-counters and special cases first */ 4840 if (reg == QIBPORTCNTR_KHDROVFL) { 4841 int i; 4842 4843 /* sum over all kernel contexts (skip if mini_init) */ 4844 for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) { 4845 struct qib_ctxtdata *rcd = dd->rcd[i]; 4846 4847 if (!rcd || rcd->ppd != ppd) 4848 continue; 4849 ret += read_7322_creg32(dd, cr_base_egrovfl + i); 4850 } 4851 goto done; 4852 } else if (reg == QIBPORTCNTR_RXDROPPKT) { 4853 /* 4854 * Used as part of the synthesis of port_rcv_errors 4855 * in the verbs code for IBTA counters. Not needed for 7322, 4856 * because all the errors are already counted by other cntrs. 4857 */ 4858 goto done; 4859 } else if (reg == QIBPORTCNTR_PSINTERVAL || 4860 reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) { 4861 /* were counters in older chips, now per-port kernel regs */ 4862 ret = qib_read_kreg_port(ppd, creg); 4863 goto done; 4864 } 4865 4866 /* 4867 * Only fast increment counters are 64 bits; use 32 bit reads to 4868 * avoid two independent reads when on Opteron. 4869 */ 4870 if (xlator[reg] & _PORT_64BIT_FLAG) 4871 ret = read_7322_creg_port(ppd, creg); 4872 else 4873 ret = read_7322_creg32_port(ppd, creg); 4874 if (creg == crp_ibsymbolerr) { 4875 if (ppd->cpspec->ibdeltainprog) 4876 ret -= ret - ppd->cpspec->ibsymsnap; 4877 ret -= ppd->cpspec->ibsymdelta; 4878 } else if (creg == crp_iblinkerrrecov) { 4879 if (ppd->cpspec->ibdeltainprog) 4880 ret -= ret - ppd->cpspec->iblnkerrsnap; 4881 ret -= ppd->cpspec->iblnkerrdelta; 4882 } else if (creg == crp_errlink) 4883 ret -= ppd->cpspec->ibmalfdelta; 4884 else if (creg == crp_iblinkdown) 4885 ret += ppd->cpspec->iblnkdowndelta; 4886 done: 4887 return ret; 4888 } 4889 4890 /* 4891 * Device counter names (not port-specific), one line per stat, 4892 * single string. Used by utilities like ipathstats to print the stats 4893 * in a way which works for different versions of drivers, without changing 4894 * the utility. Names need to be 12 chars or less (w/o newline), for proper 4895 * display by utility. 4896 * Non-error counters are first. 4897 * Start of "error" conters is indicated by a leading "E " on the first 4898 * "error" counter, and doesn't count in label length. 4899 * The EgrOvfl list needs to be last so we truncate them at the configured 4900 * context count for the device. 4901 * cntr7322indices contains the corresponding register indices. 4902 */ 4903 static const char cntr7322names[] = 4904 "Interrupts\n" 4905 "HostBusStall\n" 4906 "E RxTIDFull\n" 4907 "RxTIDInvalid\n" 4908 "RxTIDFloDrop\n" /* 7322 only */ 4909 "Ctxt0EgrOvfl\n" 4910 "Ctxt1EgrOvfl\n" 4911 "Ctxt2EgrOvfl\n" 4912 "Ctxt3EgrOvfl\n" 4913 "Ctxt4EgrOvfl\n" 4914 "Ctxt5EgrOvfl\n" 4915 "Ctxt6EgrOvfl\n" 4916 "Ctxt7EgrOvfl\n" 4917 "Ctxt8EgrOvfl\n" 4918 "Ctxt9EgrOvfl\n" 4919 "Ctx10EgrOvfl\n" 4920 "Ctx11EgrOvfl\n" 4921 "Ctx12EgrOvfl\n" 4922 "Ctx13EgrOvfl\n" 4923 "Ctx14EgrOvfl\n" 4924 "Ctx15EgrOvfl\n" 4925 "Ctx16EgrOvfl\n" 4926 "Ctx17EgrOvfl\n" 4927 ; 4928 4929 static const u32 cntr7322indices[] = { 4930 cr_lbint | _PORT_64BIT_FLAG, 4931 cr_lbstall | _PORT_64BIT_FLAG, 4932 cr_tidfull, 4933 cr_tidinvalid, 4934 cr_rxtidflowdrop, 4935 cr_base_egrovfl + 0, 4936 cr_base_egrovfl + 1, 4937 cr_base_egrovfl + 2, 4938 cr_base_egrovfl + 3, 4939 cr_base_egrovfl + 4, 4940 cr_base_egrovfl + 5, 4941 cr_base_egrovfl + 6, 4942 cr_base_egrovfl + 7, 4943 cr_base_egrovfl + 8, 4944 cr_base_egrovfl + 9, 4945 cr_base_egrovfl + 10, 4946 cr_base_egrovfl + 11, 4947 cr_base_egrovfl + 12, 4948 cr_base_egrovfl + 13, 4949 cr_base_egrovfl + 14, 4950 cr_base_egrovfl + 15, 4951 cr_base_egrovfl + 16, 4952 cr_base_egrovfl + 17, 4953 }; 4954 4955 /* 4956 * same as cntr7322names and cntr7322indices, but for port-specific counters. 4957 * portcntr7322indices is somewhat complicated by some registers needing 4958 * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG 4959 */ 4960 static const char portcntr7322names[] = 4961 "TxPkt\n" 4962 "TxFlowPkt\n" 4963 "TxWords\n" 4964 "RxPkt\n" 4965 "RxFlowPkt\n" 4966 "RxWords\n" 4967 "TxFlowStall\n" 4968 "TxDmaDesc\n" /* 7220 and 7322-only */ 4969 "E RxDlidFltr\n" /* 7220 and 7322-only */ 4970 "IBStatusChng\n" 4971 "IBLinkDown\n" 4972 "IBLnkRecov\n" 4973 "IBRxLinkErr\n" 4974 "IBSymbolErr\n" 4975 "RxLLIErr\n" 4976 "RxBadFormat\n" 4977 "RxBadLen\n" 4978 "RxBufOvrfl\n" 4979 "RxEBP\n" 4980 "RxFlowCtlErr\n" 4981 "RxICRCerr\n" 4982 "RxLPCRCerr\n" 4983 "RxVCRCerr\n" 4984 "RxInvalLen\n" 4985 "RxInvalPKey\n" 4986 "RxPktDropped\n" 4987 "TxBadLength\n" 4988 "TxDropped\n" 4989 "TxInvalLen\n" 4990 "TxUnderrun\n" 4991 "TxUnsupVL\n" 4992 "RxLclPhyErr\n" /* 7220 and 7322-only from here down */ 4993 "RxVL15Drop\n" 4994 "RxVlErr\n" 4995 "XcessBufOvfl\n" 4996 "RxQPBadCtxt\n" /* 7322-only from here down */ 4997 "TXBadHeader\n" 4998 ; 4999 5000 static const u32 portcntr7322indices[] = { 5001 QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, 5002 crp_pktsendflow, 5003 QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, 5004 QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, 5005 crp_pktrcvflowctrl, 5006 QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, 5007 QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, 5008 crp_txsdmadesc | _PORT_64BIT_FLAG, 5009 crp_rxdlidfltr, 5010 crp_ibstatuschange, 5011 QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, 5012 QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, 5013 QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, 5014 QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, 5015 QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, 5016 QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, 5017 QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, 5018 QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, 5019 QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, 5020 crp_rcvflowctrlviol, 5021 QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, 5022 QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, 5023 QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, 5024 QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, 5025 QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, 5026 QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, 5027 crp_txminmaxlenerr, 5028 crp_txdroppedpkt, 5029 crp_txlenerr, 5030 crp_txunderrun, 5031 crp_txunsupvl, 5032 QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG, 5033 QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG, 5034 QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG, 5035 QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG, 5036 crp_rxqpinvalidctxt, 5037 crp_txhdrerr, 5038 }; 5039 5040 /* do all the setup to make the counter reads efficient later */ 5041 static void init_7322_cntrnames(struct qib_devdata *dd) 5042 { 5043 int i, j = 0; 5044 char *s; 5045 5046 for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts; 5047 i++) { 5048 /* we always have at least one counter before the egrovfl */ 5049 if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) 5050 j = 1; 5051 s = strchr(s + 1, '\n'); 5052 if (s && j) 5053 j++; 5054 } 5055 dd->cspec->ncntrs = i; 5056 if (!s) 5057 /* full list; size is without terminating null */ 5058 dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1; 5059 else 5060 dd->cspec->cntrnamelen = 1 + s - cntr7322names; 5061 dd->cspec->cntrs = kmalloc(dd->cspec->ncntrs 5062 * sizeof(u64), GFP_KERNEL); 5063 if (!dd->cspec->cntrs) 5064 qib_dev_err(dd, "Failed allocation for counters\n"); 5065 5066 for (i = 0, s = (char *)portcntr7322names; s; i++) 5067 s = strchr(s + 1, '\n'); 5068 dd->cspec->nportcntrs = i - 1; 5069 dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1; 5070 for (i = 0; i < dd->num_pports; ++i) { 5071 dd->pport[i].cpspec->portcntrs = kmalloc(dd->cspec->nportcntrs 5072 * sizeof(u64), GFP_KERNEL); 5073 if (!dd->pport[i].cpspec->portcntrs) 5074 qib_dev_err(dd, 5075 "Failed allocation for portcounters\n"); 5076 } 5077 } 5078 5079 static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep, 5080 u64 **cntrp) 5081 { 5082 u32 ret; 5083 5084 if (namep) { 5085 ret = dd->cspec->cntrnamelen; 5086 if (pos >= ret) 5087 ret = 0; /* final read after getting everything */ 5088 else 5089 *namep = (char *) cntr7322names; 5090 } else { 5091 u64 *cntr = dd->cspec->cntrs; 5092 int i; 5093 5094 ret = dd->cspec->ncntrs * sizeof(u64); 5095 if (!cntr || pos >= ret) { 5096 /* everything read, or couldn't get memory */ 5097 ret = 0; 5098 goto done; 5099 } 5100 *cntrp = cntr; 5101 for (i = 0; i < dd->cspec->ncntrs; i++) 5102 if (cntr7322indices[i] & _PORT_64BIT_FLAG) 5103 *cntr++ = read_7322_creg(dd, 5104 cntr7322indices[i] & 5105 _PORT_CNTR_IDXMASK); 5106 else 5107 *cntr++ = read_7322_creg32(dd, 5108 cntr7322indices[i]); 5109 } 5110 done: 5111 return ret; 5112 } 5113 5114 static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, 5115 char **namep, u64 **cntrp) 5116 { 5117 u32 ret; 5118 5119 if (namep) { 5120 ret = dd->cspec->portcntrnamelen; 5121 if (pos >= ret) 5122 ret = 0; /* final read after getting everything */ 5123 else 5124 *namep = (char *)portcntr7322names; 5125 } else { 5126 struct qib_pportdata *ppd = &dd->pport[port]; 5127 u64 *cntr = ppd->cpspec->portcntrs; 5128 int i; 5129 5130 ret = dd->cspec->nportcntrs * sizeof(u64); 5131 if (!cntr || pos >= ret) { 5132 /* everything read, or couldn't get memory */ 5133 ret = 0; 5134 goto done; 5135 } 5136 *cntrp = cntr; 5137 for (i = 0; i < dd->cspec->nportcntrs; i++) { 5138 if (portcntr7322indices[i] & _PORT_VIRT_FLAG) 5139 *cntr++ = qib_portcntr_7322(ppd, 5140 portcntr7322indices[i] & 5141 _PORT_CNTR_IDXMASK); 5142 else if (portcntr7322indices[i] & _PORT_64BIT_FLAG) 5143 *cntr++ = read_7322_creg_port(ppd, 5144 portcntr7322indices[i] & 5145 _PORT_CNTR_IDXMASK); 5146 else 5147 *cntr++ = read_7322_creg32_port(ppd, 5148 portcntr7322indices[i]); 5149 } 5150 } 5151 done: 5152 return ret; 5153 } 5154 5155 /** 5156 * qib_get_7322_faststats - get word counters from chip before they overflow 5157 * @opaque - contains a pointer to the qlogic_ib device qib_devdata 5158 * 5159 * VESTIGIAL IBA7322 has no "small fast counters", so the only 5160 * real purpose of this function is to maintain the notion of 5161 * "active time", which in turn is only logged into the eeprom, 5162 * which we don;t have, yet, for 7322-based boards. 5163 * 5164 * called from add_timer 5165 */ 5166 static void qib_get_7322_faststats(unsigned long opaque) 5167 { 5168 struct qib_devdata *dd = (struct qib_devdata *) opaque; 5169 struct qib_pportdata *ppd; 5170 unsigned long flags; 5171 u64 traffic_wds; 5172 int pidx; 5173 5174 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 5175 ppd = dd->pport + pidx; 5176 5177 /* 5178 * If port isn't enabled or not operational ports, or 5179 * diags is running (can cause memory diags to fail) 5180 * skip this port this time. 5181 */ 5182 if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED) 5183 || dd->diag_client) 5184 continue; 5185 5186 /* 5187 * Maintain an activity timer, based on traffic 5188 * exceeding a threshold, so we need to check the word-counts 5189 * even if they are 64-bit. 5190 */ 5191 traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) + 5192 qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND); 5193 spin_lock_irqsave(&ppd->dd->eep_st_lock, flags); 5194 traffic_wds -= ppd->dd->traffic_wds; 5195 ppd->dd->traffic_wds += traffic_wds; 5196 spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags); 5197 if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active & 5198 QIB_IB_QDR) && 5199 (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | 5200 QIBL_LINKACTIVE)) && 5201 ppd->cpspec->qdr_dfe_time && 5202 time_is_before_jiffies(ppd->cpspec->qdr_dfe_time)) { 5203 ppd->cpspec->qdr_dfe_on = 0; 5204 5205 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 5206 ppd->dd->cspec->r1 ? 5207 QDR_STATIC_ADAPT_INIT_R1 : 5208 QDR_STATIC_ADAPT_INIT); 5209 force_h1(ppd); 5210 } 5211 } 5212 mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); 5213 } 5214 5215 /* 5216 * If we were using MSIx, try to fallback to INTx. 5217 */ 5218 static int qib_7322_intr_fallback(struct qib_devdata *dd) 5219 { 5220 if (!dd->cspec->num_msix_entries) 5221 return 0; /* already using INTx */ 5222 5223 qib_devinfo(dd->pcidev, 5224 "MSIx interrupt not detected, trying INTx interrupts\n"); 5225 qib_7322_nomsix(dd); 5226 qib_enable_intx(dd->pcidev); 5227 qib_setup_7322_interrupt(dd, 0); 5228 return 1; 5229 } 5230 5231 /* 5232 * Reset the XGXS (between serdes and IBC). Slightly less intrusive 5233 * than resetting the IBC or external link state, and useful in some 5234 * cases to cause some retraining. To do this right, we reset IBC 5235 * as well, then return to previous state (which may be still in reset) 5236 * NOTE: some callers of this "know" this writes the current value 5237 * of cpspec->ibcctrl_a as part of it's operation, so if that changes, 5238 * check all callers. 5239 */ 5240 static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd) 5241 { 5242 u64 val; 5243 struct qib_devdata *dd = ppd->dd; 5244 const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) | 5245 SYM_MASK(IBPCSConfig_0, xcv_treset) | 5246 SYM_MASK(IBPCSConfig_0, tx_rx_reset); 5247 5248 val = qib_read_kreg_port(ppd, krp_ib_pcsconfig); 5249 qib_write_kreg(dd, kr_hwerrmask, 5250 dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop)); 5251 qib_write_kreg_port(ppd, krp_ibcctrl_a, 5252 ppd->cpspec->ibcctrl_a & 5253 ~SYM_MASK(IBCCtrlA_0, IBLinkEn)); 5254 5255 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits); 5256 qib_read_kreg32(dd, kr_scratch); 5257 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits); 5258 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 5259 qib_write_kreg(dd, kr_scratch, 0ULL); 5260 qib_write_kreg(dd, kr_hwerrclear, 5261 SYM_MASK(HwErrClear, statusValidNoEopClear)); 5262 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 5263 } 5264 5265 /* 5266 * This code for non-IBTA-compliant IB speed negotiation is only known to 5267 * work for the SDR to DDR transition, and only between an HCA and a switch 5268 * with recent firmware. It is based on observed heuristics, rather than 5269 * actual knowledge of the non-compliant speed negotiation. 5270 * It has a number of hard-coded fields, since the hope is to rewrite this 5271 * when a spec is available on how the negoation is intended to work. 5272 */ 5273 static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr, 5274 u32 dcnt, u32 *data) 5275 { 5276 int i; 5277 u64 pbc; 5278 u32 __iomem *piobuf; 5279 u32 pnum, control, len; 5280 struct qib_devdata *dd = ppd->dd; 5281 5282 i = 0; 5283 len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */ 5284 control = qib_7322_setpbc_control(ppd, len, 0, 15); 5285 pbc = ((u64) control << 32) | len; 5286 while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) { 5287 if (i++ > 15) 5288 return; 5289 udelay(2); 5290 } 5291 /* disable header check on this packet, since it can't be valid */ 5292 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL); 5293 writeq(pbc, piobuf); 5294 qib_flush_wc(); 5295 qib_pio_copy(piobuf + 2, hdr, 7); 5296 qib_pio_copy(piobuf + 9, data, dcnt); 5297 if (dd->flags & QIB_USE_SPCL_TRIG) { 5298 u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023; 5299 5300 qib_flush_wc(); 5301 __raw_writel(0xaebecede, piobuf + spcl_off); 5302 } 5303 qib_flush_wc(); 5304 qib_sendbuf_done(dd, pnum); 5305 /* and re-enable hdr check */ 5306 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL); 5307 } 5308 5309 /* 5310 * _start packet gets sent twice at start, _done gets sent twice at end 5311 */ 5312 static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which) 5313 { 5314 struct qib_devdata *dd = ppd->dd; 5315 static u32 swapped; 5316 u32 dw, i, hcnt, dcnt, *data; 5317 static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba }; 5318 static u32 madpayload_start[0x40] = { 5319 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 5320 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 5321 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */ 5322 }; 5323 static u32 madpayload_done[0x40] = { 5324 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 5325 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 5326 0x40000001, 0x1388, 0x15e, /* rest 0's */ 5327 }; 5328 5329 dcnt = ARRAY_SIZE(madpayload_start); 5330 hcnt = ARRAY_SIZE(hdr); 5331 if (!swapped) { 5332 /* for maintainability, do it at runtime */ 5333 for (i = 0; i < hcnt; i++) { 5334 dw = (__force u32) cpu_to_be32(hdr[i]); 5335 hdr[i] = dw; 5336 } 5337 for (i = 0; i < dcnt; i++) { 5338 dw = (__force u32) cpu_to_be32(madpayload_start[i]); 5339 madpayload_start[i] = dw; 5340 dw = (__force u32) cpu_to_be32(madpayload_done[i]); 5341 madpayload_done[i] = dw; 5342 } 5343 swapped = 1; 5344 } 5345 5346 data = which ? madpayload_done : madpayload_start; 5347 5348 autoneg_7322_sendpkt(ppd, hdr, dcnt, data); 5349 qib_read_kreg64(dd, kr_scratch); 5350 udelay(2); 5351 autoneg_7322_sendpkt(ppd, hdr, dcnt, data); 5352 qib_read_kreg64(dd, kr_scratch); 5353 udelay(2); 5354 } 5355 5356 /* 5357 * Do the absolute minimum to cause an IB speed change, and make it 5358 * ready, but don't actually trigger the change. The caller will 5359 * do that when ready (if link is in Polling training state, it will 5360 * happen immediately, otherwise when link next goes down) 5361 * 5362 * This routine should only be used as part of the DDR autonegotation 5363 * code for devices that are not compliant with IB 1.2 (or code that 5364 * fixes things up for same). 5365 * 5366 * When link has gone down, and autoneg enabled, or autoneg has 5367 * failed and we give up until next time we set both speeds, and 5368 * then we want IBTA enabled as well as "use max enabled speed. 5369 */ 5370 static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed) 5371 { 5372 u64 newctrlb; 5373 5374 newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK | 5375 IBA7322_IBC_IBTA_1_2_MASK | 5376 IBA7322_IBC_MAX_SPEED_MASK); 5377 5378 if (speed & (speed - 1)) /* multiple speeds */ 5379 newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) | 5380 IBA7322_IBC_IBTA_1_2_MASK | 5381 IBA7322_IBC_MAX_SPEED_MASK; 5382 else 5383 newctrlb |= speed == QIB_IB_QDR ? 5384 IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK : 5385 ((speed == QIB_IB_DDR ? 5386 IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR)); 5387 5388 if (newctrlb == ppd->cpspec->ibcctrl_b) 5389 return; 5390 5391 ppd->cpspec->ibcctrl_b = newctrlb; 5392 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 5393 qib_write_kreg(ppd->dd, kr_scratch, 0); 5394 } 5395 5396 /* 5397 * This routine is only used when we are not talking to another 5398 * IB 1.2-compliant device that we think can do DDR. 5399 * (This includes all existing switch chips as of Oct 2007.) 5400 * 1.2-compliant devices go directly to DDR prior to reaching INIT 5401 */ 5402 static void try_7322_autoneg(struct qib_pportdata *ppd) 5403 { 5404 unsigned long flags; 5405 5406 spin_lock_irqsave(&ppd->lflags_lock, flags); 5407 ppd->lflags |= QIBL_IB_AUTONEG_INPROG; 5408 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5409 qib_autoneg_7322_send(ppd, 0); 5410 set_7322_ibspeed_fast(ppd, QIB_IB_DDR); 5411 qib_7322_mini_pcs_reset(ppd); 5412 /* 2 msec is minimum length of a poll cycle */ 5413 queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work, 5414 msecs_to_jiffies(2)); 5415 } 5416 5417 /* 5418 * Handle the empirically determined mechanism for auto-negotiation 5419 * of DDR speed with switches. 5420 */ 5421 static void autoneg_7322_work(struct work_struct *work) 5422 { 5423 struct qib_pportdata *ppd; 5424 struct qib_devdata *dd; 5425 u64 startms; 5426 u32 i; 5427 unsigned long flags; 5428 5429 ppd = container_of(work, struct qib_chippport_specific, 5430 autoneg_work.work)->ppd; 5431 dd = ppd->dd; 5432 5433 startms = jiffies_to_msecs(jiffies); 5434 5435 /* 5436 * Busy wait for this first part, it should be at most a 5437 * few hundred usec, since we scheduled ourselves for 2msec. 5438 */ 5439 for (i = 0; i < 25; i++) { 5440 if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState) 5441 == IB_7322_LT_STATE_POLLQUIET) { 5442 qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE); 5443 break; 5444 } 5445 udelay(100); 5446 } 5447 5448 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) 5449 goto done; /* we got there early or told to stop */ 5450 5451 /* we expect this to timeout */ 5452 if (wait_event_timeout(ppd->cpspec->autoneg_wait, 5453 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5454 msecs_to_jiffies(90))) 5455 goto done; 5456 qib_7322_mini_pcs_reset(ppd); 5457 5458 /* we expect this to timeout */ 5459 if (wait_event_timeout(ppd->cpspec->autoneg_wait, 5460 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5461 msecs_to_jiffies(1700))) 5462 goto done; 5463 qib_7322_mini_pcs_reset(ppd); 5464 5465 set_7322_ibspeed_fast(ppd, QIB_IB_SDR); 5466 5467 /* 5468 * Wait up to 250 msec for link to train and get to INIT at DDR; 5469 * this should terminate early. 5470 */ 5471 wait_event_timeout(ppd->cpspec->autoneg_wait, 5472 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5473 msecs_to_jiffies(250)); 5474 done: 5475 if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) { 5476 spin_lock_irqsave(&ppd->lflags_lock, flags); 5477 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; 5478 if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) { 5479 ppd->lflags |= QIBL_IB_AUTONEG_FAILED; 5480 ppd->cpspec->autoneg_tries = 0; 5481 } 5482 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5483 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5484 } 5485 } 5486 5487 /* 5488 * This routine is used to request IPG set in the QLogic switch. 5489 * Only called if r1. 5490 */ 5491 static void try_7322_ipg(struct qib_pportdata *ppd) 5492 { 5493 struct qib_ibport *ibp = &ppd->ibport_data; 5494 struct ib_mad_send_buf *send_buf; 5495 struct ib_mad_agent *agent; 5496 struct ib_smp *smp; 5497 unsigned delay; 5498 int ret; 5499 5500 agent = ibp->send_agent; 5501 if (!agent) 5502 goto retry; 5503 5504 send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR, 5505 IB_MGMT_MAD_DATA, GFP_ATOMIC); 5506 if (IS_ERR(send_buf)) 5507 goto retry; 5508 5509 if (!ibp->smi_ah) { 5510 struct ib_ah *ah; 5511 5512 ah = qib_create_qp0_ah(ibp, be16_to_cpu(IB_LID_PERMISSIVE)); 5513 if (IS_ERR(ah)) 5514 ret = PTR_ERR(ah); 5515 else { 5516 send_buf->ah = ah; 5517 ibp->smi_ah = to_iah(ah); 5518 ret = 0; 5519 } 5520 } else { 5521 send_buf->ah = &ibp->smi_ah->ibah; 5522 ret = 0; 5523 } 5524 5525 smp = send_buf->mad; 5526 smp->base_version = IB_MGMT_BASE_VERSION; 5527 smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE; 5528 smp->class_version = 1; 5529 smp->method = IB_MGMT_METHOD_SEND; 5530 smp->hop_cnt = 1; 5531 smp->attr_id = QIB_VENDOR_IPG; 5532 smp->attr_mod = 0; 5533 5534 if (!ret) 5535 ret = ib_post_send_mad(send_buf, NULL); 5536 if (ret) 5537 ib_free_send_mad(send_buf); 5538 retry: 5539 delay = 2 << ppd->cpspec->ipg_tries; 5540 queue_delayed_work(ib_wq, &ppd->cpspec->ipg_work, 5541 msecs_to_jiffies(delay)); 5542 } 5543 5544 /* 5545 * Timeout handler for setting IPG. 5546 * Only called if r1. 5547 */ 5548 static void ipg_7322_work(struct work_struct *work) 5549 { 5550 struct qib_pportdata *ppd; 5551 5552 ppd = container_of(work, struct qib_chippport_specific, 5553 ipg_work.work)->ppd; 5554 if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE)) 5555 && ++ppd->cpspec->ipg_tries <= 10) 5556 try_7322_ipg(ppd); 5557 } 5558 5559 static u32 qib_7322_iblink_state(u64 ibcs) 5560 { 5561 u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState); 5562 5563 switch (state) { 5564 case IB_7322_L_STATE_INIT: 5565 state = IB_PORT_INIT; 5566 break; 5567 case IB_7322_L_STATE_ARM: 5568 state = IB_PORT_ARMED; 5569 break; 5570 case IB_7322_L_STATE_ACTIVE: 5571 /* fall through */ 5572 case IB_7322_L_STATE_ACT_DEFER: 5573 state = IB_PORT_ACTIVE; 5574 break; 5575 default: /* fall through */ 5576 case IB_7322_L_STATE_DOWN: 5577 state = IB_PORT_DOWN; 5578 break; 5579 } 5580 return state; 5581 } 5582 5583 /* returns the IBTA port state, rather than the IBC link training state */ 5584 static u8 qib_7322_phys_portstate(u64 ibcs) 5585 { 5586 u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState); 5587 return qib_7322_physportstate[state]; 5588 } 5589 5590 static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) 5591 { 5592 int ret = 0, symadj = 0; 5593 unsigned long flags; 5594 int mult; 5595 5596 spin_lock_irqsave(&ppd->lflags_lock, flags); 5597 ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; 5598 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5599 5600 /* Update our picture of width and speed from chip */ 5601 if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) { 5602 ppd->link_speed_active = QIB_IB_QDR; 5603 mult = 4; 5604 } else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) { 5605 ppd->link_speed_active = QIB_IB_DDR; 5606 mult = 2; 5607 } else { 5608 ppd->link_speed_active = QIB_IB_SDR; 5609 mult = 1; 5610 } 5611 if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) { 5612 ppd->link_width_active = IB_WIDTH_4X; 5613 mult *= 4; 5614 } else 5615 ppd->link_width_active = IB_WIDTH_1X; 5616 ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)]; 5617 5618 if (!ibup) { 5619 u64 clr; 5620 5621 /* Link went down. */ 5622 /* do IPG MAD again after linkdown, even if last time failed */ 5623 ppd->cpspec->ipg_tries = 0; 5624 clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) & 5625 (SYM_MASK(IBCStatusB_0, heartbeat_timed_out) | 5626 SYM_MASK(IBCStatusB_0, heartbeat_crosstalk)); 5627 if (clr) 5628 qib_write_kreg_port(ppd, krp_ibcstatus_b, clr); 5629 if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | 5630 QIBL_IB_AUTONEG_INPROG))) 5631 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5632 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5633 struct qib_qsfp_data *qd = 5634 &ppd->cpspec->qsfp_data; 5635 /* unlock the Tx settings, speed may change */ 5636 qib_write_kreg_port(ppd, krp_tx_deemph_override, 5637 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 5638 reset_tx_deemphasis_override)); 5639 qib_cancel_sends(ppd); 5640 /* on link down, ensure sane pcs state */ 5641 qib_7322_mini_pcs_reset(ppd); 5642 /* schedule the qsfp refresh which should turn the link 5643 off */ 5644 if (ppd->dd->flags & QIB_HAS_QSFP) { 5645 qd->t_insert = jiffies; 5646 queue_work(ib_wq, &qd->work); 5647 } 5648 spin_lock_irqsave(&ppd->sdma_lock, flags); 5649 if (__qib_sdma_running(ppd)) 5650 __qib_sdma_process_event(ppd, 5651 qib_sdma_event_e70_go_idle); 5652 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 5653 } 5654 clr = read_7322_creg32_port(ppd, crp_iblinkdown); 5655 if (clr == ppd->cpspec->iblnkdownsnap) 5656 ppd->cpspec->iblnkdowndelta++; 5657 } else { 5658 if (qib_compat_ddr_negotiate && 5659 !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | 5660 QIBL_IB_AUTONEG_INPROG)) && 5661 ppd->link_speed_active == QIB_IB_SDR && 5662 (ppd->link_speed_enabled & QIB_IB_DDR) 5663 && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) { 5664 /* we are SDR, and auto-negotiation enabled */ 5665 ++ppd->cpspec->autoneg_tries; 5666 if (!ppd->cpspec->ibdeltainprog) { 5667 ppd->cpspec->ibdeltainprog = 1; 5668 ppd->cpspec->ibsymdelta += 5669 read_7322_creg32_port(ppd, 5670 crp_ibsymbolerr) - 5671 ppd->cpspec->ibsymsnap; 5672 ppd->cpspec->iblnkerrdelta += 5673 read_7322_creg32_port(ppd, 5674 crp_iblinkerrrecov) - 5675 ppd->cpspec->iblnkerrsnap; 5676 } 5677 try_7322_autoneg(ppd); 5678 ret = 1; /* no other IB status change processing */ 5679 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && 5680 ppd->link_speed_active == QIB_IB_SDR) { 5681 qib_autoneg_7322_send(ppd, 1); 5682 set_7322_ibspeed_fast(ppd, QIB_IB_DDR); 5683 qib_7322_mini_pcs_reset(ppd); 5684 udelay(2); 5685 ret = 1; /* no other IB status change processing */ 5686 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && 5687 (ppd->link_speed_active & QIB_IB_DDR)) { 5688 spin_lock_irqsave(&ppd->lflags_lock, flags); 5689 ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG | 5690 QIBL_IB_AUTONEG_FAILED); 5691 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5692 ppd->cpspec->autoneg_tries = 0; 5693 /* re-enable SDR, for next link down */ 5694 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5695 wake_up(&ppd->cpspec->autoneg_wait); 5696 symadj = 1; 5697 } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) { 5698 /* 5699 * Clear autoneg failure flag, and do setup 5700 * so we'll try next time link goes down and 5701 * back to INIT (possibly connected to a 5702 * different device). 5703 */ 5704 spin_lock_irqsave(&ppd->lflags_lock, flags); 5705 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 5706 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5707 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK; 5708 symadj = 1; 5709 } 5710 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5711 symadj = 1; 5712 if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10) 5713 try_7322_ipg(ppd); 5714 if (!ppd->cpspec->recovery_init) 5715 setup_7322_link_recovery(ppd, 0); 5716 ppd->cpspec->qdr_dfe_time = jiffies + 5717 msecs_to_jiffies(QDR_DFE_DISABLE_DELAY); 5718 } 5719 ppd->cpspec->ibmalfusesnap = 0; 5720 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, 5721 crp_errlink); 5722 } 5723 if (symadj) { 5724 ppd->cpspec->iblnkdownsnap = 5725 read_7322_creg32_port(ppd, crp_iblinkdown); 5726 if (ppd->cpspec->ibdeltainprog) { 5727 ppd->cpspec->ibdeltainprog = 0; 5728 ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd, 5729 crp_ibsymbolerr) - ppd->cpspec->ibsymsnap; 5730 ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd, 5731 crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap; 5732 } 5733 } else if (!ibup && qib_compat_ddr_negotiate && 5734 !ppd->cpspec->ibdeltainprog && 5735 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5736 ppd->cpspec->ibdeltainprog = 1; 5737 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, 5738 crp_ibsymbolerr); 5739 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, 5740 crp_iblinkerrrecov); 5741 } 5742 5743 if (!ret) 5744 qib_setup_7322_setextled(ppd, ibup); 5745 return ret; 5746 } 5747 5748 /* 5749 * Does read/modify/write to appropriate registers to 5750 * set output and direction bits selected by mask. 5751 * these are in their canonical postions (e.g. lsb of 5752 * dir will end up in D48 of extctrl on existing chips). 5753 * returns contents of GP Inputs. 5754 */ 5755 static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) 5756 { 5757 u64 read_val, new_out; 5758 unsigned long flags; 5759 5760 if (mask) { 5761 /* some bits being written, lock access to GPIO */ 5762 dir &= mask; 5763 out &= mask; 5764 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 5765 dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); 5766 dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); 5767 new_out = (dd->cspec->gpio_out & ~mask) | out; 5768 5769 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 5770 qib_write_kreg(dd, kr_gpio_out, new_out); 5771 dd->cspec->gpio_out = new_out; 5772 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 5773 } 5774 /* 5775 * It is unlikely that a read at this time would get valid 5776 * data on a pin whose direction line was set in the same 5777 * call to this function. We include the read here because 5778 * that allows us to potentially combine a change on one pin with 5779 * a read on another, and because the old code did something like 5780 * this. 5781 */ 5782 read_val = qib_read_kreg64(dd, kr_extstatus); 5783 return SYM_FIELD(read_val, EXTStatus, GPIOIn); 5784 } 5785 5786 /* Enable writes to config EEPROM, if possible. Returns previous state */ 5787 static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen) 5788 { 5789 int prev_wen; 5790 u32 mask; 5791 5792 mask = 1 << QIB_EEPROM_WEN_NUM; 5793 prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM; 5794 gpio_7322_mod(dd, wen ? 0 : mask, mask, mask); 5795 5796 return prev_wen & 1; 5797 } 5798 5799 /* 5800 * Read fundamental info we need to use the chip. These are 5801 * the registers that describe chip capabilities, and are 5802 * saved in shadow registers. 5803 */ 5804 static void get_7322_chip_params(struct qib_devdata *dd) 5805 { 5806 u64 val; 5807 u32 piobufs; 5808 int mtu; 5809 5810 dd->palign = qib_read_kreg32(dd, kr_pagealign); 5811 5812 dd->uregbase = qib_read_kreg32(dd, kr_userregbase); 5813 5814 dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); 5815 dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); 5816 dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); 5817 dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); 5818 dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; 5819 5820 val = qib_read_kreg64(dd, kr_sendpiobufcnt); 5821 dd->piobcnt2k = val & ~0U; 5822 dd->piobcnt4k = val >> 32; 5823 val = qib_read_kreg64(dd, kr_sendpiosize); 5824 dd->piosize2k = val & ~0U; 5825 dd->piosize4k = val >> 32; 5826 5827 mtu = ib_mtu_enum_to_int(qib_ibmtu); 5828 if (mtu == -1) 5829 mtu = QIB_DEFAULT_MTU; 5830 dd->pport[0].ibmtu = (u32)mtu; 5831 dd->pport[1].ibmtu = (u32)mtu; 5832 5833 /* these may be adjusted in init_chip_wc_pat() */ 5834 dd->pio2kbase = (u32 __iomem *) 5835 ((char __iomem *) dd->kregbase + dd->pio2k_bufbase); 5836 dd->pio4kbase = (u32 __iomem *) 5837 ((char __iomem *) dd->kregbase + 5838 (dd->piobufbase >> 32)); 5839 /* 5840 * 4K buffers take 2 pages; we use roundup just to be 5841 * paranoid; we calculate it once here, rather than on 5842 * ever buf allocate 5843 */ 5844 dd->align4k = ALIGN(dd->piosize4k, dd->palign); 5845 5846 piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS; 5847 5848 dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / 5849 (sizeof(u64) * BITS_PER_BYTE / 2); 5850 } 5851 5852 /* 5853 * The chip base addresses in cspec and cpspec have to be set 5854 * after possible init_chip_wc_pat(), rather than in 5855 * get_7322_chip_params(), so split out as separate function 5856 */ 5857 static void qib_7322_set_baseaddrs(struct qib_devdata *dd) 5858 { 5859 u32 cregbase; 5860 5861 cregbase = qib_read_kreg32(dd, kr_counterregbase); 5862 5863 dd->cspec->cregbase = (u64 __iomem *)(cregbase + 5864 (char __iomem *)dd->kregbase); 5865 5866 dd->egrtidbase = (u64 __iomem *) 5867 ((char __iomem *) dd->kregbase + dd->rcvegrbase); 5868 5869 /* port registers are defined as relative to base of chip */ 5870 dd->pport[0].cpspec->kpregbase = 5871 (u64 __iomem *)((char __iomem *)dd->kregbase); 5872 dd->pport[1].cpspec->kpregbase = 5873 (u64 __iomem *)(dd->palign + 5874 (char __iomem *)dd->kregbase); 5875 dd->pport[0].cpspec->cpregbase = 5876 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[0], 5877 kr_counterregbase) + (char __iomem *)dd->kregbase); 5878 dd->pport[1].cpspec->cpregbase = 5879 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[1], 5880 kr_counterregbase) + (char __iomem *)dd->kregbase); 5881 } 5882 5883 /* 5884 * This is a fairly special-purpose observer, so we only support 5885 * the port-specific parts of SendCtrl 5886 */ 5887 5888 #define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) | \ 5889 SYM_MASK(SendCtrl_0, SDmaEnable) | \ 5890 SYM_MASK(SendCtrl_0, SDmaIntEnable) | \ 5891 SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \ 5892 SYM_MASK(SendCtrl_0, SDmaHalt) | \ 5893 SYM_MASK(SendCtrl_0, IBVLArbiterEn) | \ 5894 SYM_MASK(SendCtrl_0, ForceCreditUpToDate)) 5895 5896 static int sendctrl_hook(struct qib_devdata *dd, 5897 const struct diag_observer *op, u32 offs, 5898 u64 *data, u64 mask, int only_32) 5899 { 5900 unsigned long flags; 5901 unsigned idx; 5902 unsigned pidx; 5903 struct qib_pportdata *ppd = NULL; 5904 u64 local_data, all_bits; 5905 5906 /* 5907 * The fixed correspondence between Physical ports and pports is 5908 * severed. We need to hunt for the ppd that corresponds 5909 * to the offset we got. And we have to do that without admitting 5910 * we know the stride, apparently. 5911 */ 5912 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 5913 u64 __iomem *psptr; 5914 u32 psoffs; 5915 5916 ppd = dd->pport + pidx; 5917 if (!ppd->cpspec->kpregbase) 5918 continue; 5919 5920 psptr = ppd->cpspec->kpregbase + krp_sendctrl; 5921 psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr); 5922 if (psoffs == offs) 5923 break; 5924 } 5925 5926 /* If pport is not being managed by driver, just avoid shadows. */ 5927 if (pidx >= dd->num_pports) 5928 ppd = NULL; 5929 5930 /* In any case, "idx" is flat index in kreg space */ 5931 idx = offs / sizeof(u64); 5932 5933 all_bits = ~0ULL; 5934 if (only_32) 5935 all_bits >>= 32; 5936 5937 spin_lock_irqsave(&dd->sendctrl_lock, flags); 5938 if (!ppd || (mask & all_bits) != all_bits) { 5939 /* 5940 * At least some mask bits are zero, so we need 5941 * to read. The judgement call is whether from 5942 * reg or shadow. First-cut: read reg, and complain 5943 * if any bits which should be shadowed are different 5944 * from their shadowed value. 5945 */ 5946 if (only_32) 5947 local_data = (u64)qib_read_kreg32(dd, idx); 5948 else 5949 local_data = qib_read_kreg64(dd, idx); 5950 *data = (local_data & ~mask) | (*data & mask); 5951 } 5952 if (mask) { 5953 /* 5954 * At least some mask bits are one, so we need 5955 * to write, but only shadow some bits. 5956 */ 5957 u64 sval, tval; /* Shadowed, transient */ 5958 5959 /* 5960 * New shadow val is bits we don't want to touch, 5961 * ORed with bits we do, that are intended for shadow. 5962 */ 5963 if (ppd) { 5964 sval = ppd->p_sendctrl & ~mask; 5965 sval |= *data & SENDCTRL_SHADOWED & mask; 5966 ppd->p_sendctrl = sval; 5967 } else 5968 sval = *data & SENDCTRL_SHADOWED & mask; 5969 tval = sval | (*data & ~SENDCTRL_SHADOWED & mask); 5970 qib_write_kreg(dd, idx, tval); 5971 qib_write_kreg(dd, kr_scratch, 0Ull); 5972 } 5973 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 5974 return only_32 ? 4 : 8; 5975 } 5976 5977 static const struct diag_observer sendctrl_0_observer = { 5978 sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64), 5979 KREG_IDX(SendCtrl_0) * sizeof(u64) 5980 }; 5981 5982 static const struct diag_observer sendctrl_1_observer = { 5983 sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64), 5984 KREG_IDX(SendCtrl_1) * sizeof(u64) 5985 }; 5986 5987 static ushort sdma_fetch_prio = 8; 5988 module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO); 5989 MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority"); 5990 5991 /* Besides logging QSFP events, we set appropriate TxDDS values */ 5992 static void init_txdds_table(struct qib_pportdata *ppd, int override); 5993 5994 static void qsfp_7322_event(struct work_struct *work) 5995 { 5996 struct qib_qsfp_data *qd; 5997 struct qib_pportdata *ppd; 5998 unsigned long pwrup; 5999 unsigned long flags; 6000 int ret; 6001 u32 le2; 6002 6003 qd = container_of(work, struct qib_qsfp_data, work); 6004 ppd = qd->ppd; 6005 pwrup = qd->t_insert + 6006 msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC); 6007 6008 /* Delay for 20 msecs to allow ModPrs resistor to setup */ 6009 mdelay(QSFP_MODPRS_LAG_MSEC); 6010 6011 if (!qib_qsfp_mod_present(ppd)) { 6012 ppd->cpspec->qsfp_data.modpresent = 0; 6013 /* Set the physical link to disabled */ 6014 qib_set_ib_7322_lstate(ppd, 0, 6015 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 6016 spin_lock_irqsave(&ppd->lflags_lock, flags); 6017 ppd->lflags &= ~QIBL_LINKV; 6018 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 6019 } else { 6020 /* 6021 * Some QSFP's not only do not respond until the full power-up 6022 * time, but may behave badly if we try. So hold off responding 6023 * to insertion. 6024 */ 6025 while (1) { 6026 if (time_is_before_jiffies(pwrup)) 6027 break; 6028 msleep(20); 6029 } 6030 6031 ret = qib_refresh_qsfp_cache(ppd, &qd->cache); 6032 6033 /* 6034 * Need to change LE2 back to defaults if we couldn't 6035 * read the cable type (to handle cable swaps), so do this 6036 * even on failure to read cable information. We don't 6037 * get here for QME, so IS_QME check not needed here. 6038 */ 6039 if (!ret && !ppd->dd->cspec->r1) { 6040 if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) 6041 le2 = LE2_QME; 6042 else if (qd->cache.atten[1] >= qib_long_atten && 6043 QSFP_IS_CU(qd->cache.tech)) 6044 le2 = LE2_5m; 6045 else 6046 le2 = LE2_DEFAULT; 6047 } else 6048 le2 = LE2_DEFAULT; 6049 ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); 6050 /* 6051 * We always change parameteters, since we can choose 6052 * values for cables without eeproms, and the cable may have 6053 * changed from a cable with full or partial eeprom content 6054 * to one with partial or no content. 6055 */ 6056 init_txdds_table(ppd, 0); 6057 /* The physical link is being re-enabled only when the 6058 * previous state was DISABLED and the VALID bit is not 6059 * set. This should only happen when the cable has been 6060 * physically pulled. */ 6061 if (!ppd->cpspec->qsfp_data.modpresent && 6062 (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) { 6063 ppd->cpspec->qsfp_data.modpresent = 1; 6064 qib_set_ib_7322_lstate(ppd, 0, 6065 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); 6066 spin_lock_irqsave(&ppd->lflags_lock, flags); 6067 ppd->lflags |= QIBL_LINKV; 6068 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 6069 } 6070 } 6071 } 6072 6073 /* 6074 * There is little we can do but complain to the user if QSFP 6075 * initialization fails. 6076 */ 6077 static void qib_init_7322_qsfp(struct qib_pportdata *ppd) 6078 { 6079 unsigned long flags; 6080 struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data; 6081 struct qib_devdata *dd = ppd->dd; 6082 u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N; 6083 6084 mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); 6085 qd->ppd = ppd; 6086 qib_qsfp_init(qd, qsfp_7322_event); 6087 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 6088 dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert)); 6089 dd->cspec->gpio_mask |= mod_prs_bit; 6090 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 6091 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 6092 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 6093 } 6094 6095 /* 6096 * called at device initialization time, and also if the txselect 6097 * module parameter is changed. This is used for cables that don't 6098 * have valid QSFP EEPROMs (not present, or attenuation is zero). 6099 * We initialize to the default, then if there is a specific 6100 * unit,port match, we use that (and set it immediately, for the 6101 * current speed, if the link is at INIT or better). 6102 * String format is "default# unit#,port#=# ... u,p=#", separators must 6103 * be a SPACE character. A newline terminates. The u,p=# tuples may 6104 * optionally have "u,p=#,#", where the final # is the H1 value 6105 * The last specific match is used (actually, all are used, but last 6106 * one is the one that winds up set); if none at all, fall back on default. 6107 */ 6108 static void set_no_qsfp_atten(struct qib_devdata *dd, int change) 6109 { 6110 char *nxt, *str; 6111 u32 pidx, unit, port, deflt, h1; 6112 unsigned long val; 6113 int any = 0, seth1; 6114 int txdds_size; 6115 6116 str = txselect_list; 6117 6118 /* default number is validated in setup_txselect() */ 6119 deflt = simple_strtoul(str, &nxt, 0); 6120 for (pidx = 0; pidx < dd->num_pports; ++pidx) 6121 dd->pport[pidx].cpspec->no_eep = deflt; 6122 6123 txdds_size = TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ; 6124 if (IS_QME(dd) || IS_QMH(dd)) 6125 txdds_size += TXDDS_MFG_SZ; 6126 6127 while (*nxt && nxt[1]) { 6128 str = ++nxt; 6129 unit = simple_strtoul(str, &nxt, 0); 6130 if (nxt == str || !*nxt || *nxt != ',') { 6131 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6132 ; 6133 continue; 6134 } 6135 str = ++nxt; 6136 port = simple_strtoul(str, &nxt, 0); 6137 if (nxt == str || *nxt != '=') { 6138 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6139 ; 6140 continue; 6141 } 6142 str = ++nxt; 6143 val = simple_strtoul(str, &nxt, 0); 6144 if (nxt == str) { 6145 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6146 ; 6147 continue; 6148 } 6149 if (val >= txdds_size) 6150 continue; 6151 seth1 = 0; 6152 h1 = 0; /* gcc thinks it might be used uninitted */ 6153 if (*nxt == ',' && nxt[1]) { 6154 str = ++nxt; 6155 h1 = (u32)simple_strtoul(str, &nxt, 0); 6156 if (nxt == str) 6157 while (*nxt && *nxt++ != ' ') /* skip */ 6158 ; 6159 else 6160 seth1 = 1; 6161 } 6162 for (pidx = 0; dd->unit == unit && pidx < dd->num_pports; 6163 ++pidx) { 6164 struct qib_pportdata *ppd = &dd->pport[pidx]; 6165 6166 if (ppd->port != port || !ppd->link_speed_supported) 6167 continue; 6168 ppd->cpspec->no_eep = val; 6169 if (seth1) 6170 ppd->cpspec->h1_val = h1; 6171 /* now change the IBC and serdes, overriding generic */ 6172 init_txdds_table(ppd, 1); 6173 /* Re-enable the physical state machine on mezz boards 6174 * now that the correct settings have been set. 6175 * QSFP boards are handles by the QSFP event handler */ 6176 if (IS_QMH(dd) || IS_QME(dd)) 6177 qib_set_ib_7322_lstate(ppd, 0, 6178 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); 6179 any++; 6180 } 6181 if (*nxt == '\n') 6182 break; /* done */ 6183 } 6184 if (change && !any) { 6185 /* no specific setting, use the default. 6186 * Change the IBC and serdes, but since it's 6187 * general, don't override specific settings. 6188 */ 6189 for (pidx = 0; pidx < dd->num_pports; ++pidx) 6190 if (dd->pport[pidx].link_speed_supported) 6191 init_txdds_table(&dd->pport[pidx], 0); 6192 } 6193 } 6194 6195 /* handle the txselect parameter changing */ 6196 static int setup_txselect(const char *str, struct kernel_param *kp) 6197 { 6198 struct qib_devdata *dd; 6199 unsigned long val; 6200 char *n; 6201 6202 if (strlen(str) >= MAX_ATTEN_LEN) { 6203 pr_info("txselect_values string too long\n"); 6204 return -ENOSPC; 6205 } 6206 val = simple_strtoul(str, &n, 0); 6207 if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + 6208 TXDDS_MFG_SZ)) { 6209 pr_info("txselect_values must start with a number < %d\n", 6210 TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ); 6211 return -EINVAL; 6212 } 6213 strcpy(txselect_list, str); 6214 6215 list_for_each_entry(dd, &qib_dev_list, list) 6216 if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322) 6217 set_no_qsfp_atten(dd, 1); 6218 return 0; 6219 } 6220 6221 /* 6222 * Write the final few registers that depend on some of the 6223 * init setup. Done late in init, just before bringing up 6224 * the serdes. 6225 */ 6226 static int qib_late_7322_initreg(struct qib_devdata *dd) 6227 { 6228 int ret = 0, n; 6229 u64 val; 6230 6231 qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); 6232 qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); 6233 qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); 6234 qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); 6235 val = qib_read_kreg64(dd, kr_sendpioavailaddr); 6236 if (val != dd->pioavailregs_phys) { 6237 qib_dev_err(dd, 6238 "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n", 6239 (unsigned long) dd->pioavailregs_phys, 6240 (unsigned long long) val); 6241 ret = -EINVAL; 6242 } 6243 6244 n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 6245 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL); 6246 /* driver sends get pkey, lid, etc. checking also, to catch bugs */ 6247 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL); 6248 6249 qib_register_observer(dd, &sendctrl_0_observer); 6250 qib_register_observer(dd, &sendctrl_1_observer); 6251 6252 dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN; 6253 qib_write_kreg(dd, kr_control, dd->control); 6254 /* 6255 * Set SendDmaFetchPriority and init Tx params, including 6256 * QSFP handler on boards that have QSFP. 6257 * First set our default attenuation entry for cables that 6258 * don't have valid attenuation. 6259 */ 6260 set_no_qsfp_atten(dd, 0); 6261 for (n = 0; n < dd->num_pports; ++n) { 6262 struct qib_pportdata *ppd = dd->pport + n; 6263 6264 qib_write_kreg_port(ppd, krp_senddmaprioritythld, 6265 sdma_fetch_prio & 0xf); 6266 /* Initialize qsfp if present on board. */ 6267 if (dd->flags & QIB_HAS_QSFP) 6268 qib_init_7322_qsfp(ppd); 6269 } 6270 dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN; 6271 qib_write_kreg(dd, kr_control, dd->control); 6272 6273 return ret; 6274 } 6275 6276 /* per IB port errors. */ 6277 #define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \ 6278 MASK_ACROSS(8, 15)) 6279 #define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41)) 6280 #define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \ 6281 MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \ 6282 MASK_ACROSS(0, 11)) 6283 6284 /* 6285 * Write the initialization per-port registers that need to be done at 6286 * driver load and after reset completes (i.e., that aren't done as part 6287 * of other init procedures called from qib_init.c). 6288 * Some of these should be redundant on reset, but play safe. 6289 */ 6290 static void write_7322_init_portregs(struct qib_pportdata *ppd) 6291 { 6292 u64 val; 6293 int i; 6294 6295 if (!ppd->link_speed_supported) { 6296 /* no buffer credits for this port */ 6297 for (i = 1; i < 8; i++) 6298 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); 6299 qib_write_kreg_port(ppd, krp_ibcctrl_b, 0); 6300 qib_write_kreg(ppd->dd, kr_scratch, 0); 6301 return; 6302 } 6303 6304 /* 6305 * Set the number of supported virtual lanes in IBC, 6306 * for flow control packet handling on unsupported VLs 6307 */ 6308 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); 6309 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP); 6310 val |= (u64)(ppd->vls_supported - 1) << 6311 SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP); 6312 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 6313 6314 qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP); 6315 6316 /* enable tx header checking */ 6317 qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY | 6318 IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID | 6319 IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ); 6320 6321 qib_write_kreg_port(ppd, krp_ncmodectrl, 6322 SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal)); 6323 6324 /* 6325 * Unconditionally clear the bufmask bits. If SDMA is 6326 * enabled, we'll set them appropriately later. 6327 */ 6328 qib_write_kreg_port(ppd, krp_senddmabufmask0, 0); 6329 qib_write_kreg_port(ppd, krp_senddmabufmask1, 0); 6330 qib_write_kreg_port(ppd, krp_senddmabufmask2, 0); 6331 if (ppd->dd->cspec->r1) 6332 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate); 6333 } 6334 6335 /* 6336 * Write the initialization per-device registers that need to be done at 6337 * driver load and after reset completes (i.e., that aren't done as part 6338 * of other init procedures called from qib_init.c). Also write per-port 6339 * registers that are affected by overall device config, such as QP mapping 6340 * Some of these should be redundant on reset, but play safe. 6341 */ 6342 static void write_7322_initregs(struct qib_devdata *dd) 6343 { 6344 struct qib_pportdata *ppd; 6345 int i, pidx; 6346 u64 val; 6347 6348 /* Set Multicast QPs received by port 2 to map to context one. */ 6349 qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1); 6350 6351 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 6352 unsigned n, regno; 6353 unsigned long flags; 6354 6355 if (dd->n_krcv_queues < 2 || 6356 !dd->pport[pidx].link_speed_supported) 6357 continue; 6358 6359 ppd = &dd->pport[pidx]; 6360 6361 /* be paranoid against later code motion, etc. */ 6362 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 6363 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable); 6364 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 6365 6366 /* Initialize QP to context mapping */ 6367 regno = krp_rcvqpmaptable; 6368 val = 0; 6369 if (dd->num_pports > 1) 6370 n = dd->first_user_ctxt / dd->num_pports; 6371 else 6372 n = dd->first_user_ctxt - 1; 6373 for (i = 0; i < 32; ) { 6374 unsigned ctxt; 6375 6376 if (dd->num_pports > 1) 6377 ctxt = (i % n) * dd->num_pports + pidx; 6378 else if (i % n) 6379 ctxt = (i % n) + 1; 6380 else 6381 ctxt = ppd->hw_pidx; 6382 val |= ctxt << (5 * (i % 6)); 6383 i++; 6384 if (i % 6 == 0) { 6385 qib_write_kreg_port(ppd, regno, val); 6386 val = 0; 6387 regno++; 6388 } 6389 } 6390 qib_write_kreg_port(ppd, regno, val); 6391 } 6392 6393 /* 6394 * Setup up interrupt mitigation for kernel contexts, but 6395 * not user contexts (user contexts use interrupts when 6396 * stalled waiting for any packet, so want those interrupts 6397 * right away). 6398 */ 6399 for (i = 0; i < dd->first_user_ctxt; i++) { 6400 dd->cspec->rcvavail_timeout[i] = rcv_int_timeout; 6401 qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout); 6402 } 6403 6404 /* 6405 * Initialize as (disabled) rcvflow tables. Application code 6406 * will setup each flow as it uses the flow. 6407 * Doesn't clear any of the error bits that might be set. 6408 */ 6409 val = TIDFLOW_ERRBITS; /* these are W1C */ 6410 for (i = 0; i < dd->cfgctxts; i++) { 6411 int flow; 6412 6413 for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++) 6414 qib_write_ureg(dd, ur_rcvflowtable+flow, val, i); 6415 } 6416 6417 /* 6418 * dual cards init to dual port recovery, single port cards to 6419 * the one port. Dual port cards may later adjust to 1 port, 6420 * and then back to dual port if both ports are connected 6421 * */ 6422 if (dd->num_pports) 6423 setup_7322_link_recovery(dd->pport, dd->num_pports > 1); 6424 } 6425 6426 static int qib_init_7322_variables(struct qib_devdata *dd) 6427 { 6428 struct qib_pportdata *ppd; 6429 unsigned features, pidx, sbufcnt; 6430 int ret, mtu; 6431 u32 sbufs, updthresh; 6432 6433 /* pport structs are contiguous, allocated after devdata */ 6434 ppd = (struct qib_pportdata *)(dd + 1); 6435 dd->pport = ppd; 6436 ppd[0].dd = dd; 6437 ppd[1].dd = dd; 6438 6439 dd->cspec = (struct qib_chip_specific *)(ppd + 2); 6440 6441 ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1); 6442 ppd[1].cpspec = &ppd[0].cpspec[1]; 6443 ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */ 6444 ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */ 6445 6446 spin_lock_init(&dd->cspec->rcvmod_lock); 6447 spin_lock_init(&dd->cspec->gpio_lock); 6448 6449 /* we haven't yet set QIB_PRESENT, so use read directly */ 6450 dd->revision = readq(&dd->kregbase[kr_revision]); 6451 6452 if ((dd->revision & 0xffffffffU) == 0xffffffffU) { 6453 qib_dev_err(dd, 6454 "Revision register read failure, giving up initialization\n"); 6455 ret = -ENODEV; 6456 goto bail; 6457 } 6458 dd->flags |= QIB_PRESENT; /* now register routines work */ 6459 6460 dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor); 6461 dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor); 6462 dd->cspec->r1 = dd->minrev == 1; 6463 6464 get_7322_chip_params(dd); 6465 features = qib_7322_boardname(dd); 6466 6467 /* now that piobcnt2k and 4k set, we can allocate these */ 6468 sbufcnt = dd->piobcnt2k + dd->piobcnt4k + 6469 NUM_VL15_BUFS + BITS_PER_LONG - 1; 6470 sbufcnt /= BITS_PER_LONG; 6471 dd->cspec->sendchkenable = kmalloc(sbufcnt * 6472 sizeof(*dd->cspec->sendchkenable), GFP_KERNEL); 6473 dd->cspec->sendgrhchk = kmalloc(sbufcnt * 6474 sizeof(*dd->cspec->sendgrhchk), GFP_KERNEL); 6475 dd->cspec->sendibchk = kmalloc(sbufcnt * 6476 sizeof(*dd->cspec->sendibchk), GFP_KERNEL); 6477 if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk || 6478 !dd->cspec->sendibchk) { 6479 qib_dev_err(dd, "Failed allocation for hdrchk bitmaps\n"); 6480 ret = -ENOMEM; 6481 goto bail; 6482 } 6483 6484 ppd = dd->pport; 6485 6486 /* 6487 * GPIO bits for TWSI data and clock, 6488 * used for serial EEPROM. 6489 */ 6490 dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; 6491 dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; 6492 dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV; 6493 6494 dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY | 6495 QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP | 6496 QIB_HAS_THRESH_UPDATE | 6497 (sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0); 6498 dd->flags |= qib_special_trigger ? 6499 QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA; 6500 6501 /* 6502 * Setup initial values. These may change when PAT is enabled, but 6503 * we need these to do initial chip register accesses. 6504 */ 6505 qib_7322_set_baseaddrs(dd); 6506 6507 mtu = ib_mtu_enum_to_int(qib_ibmtu); 6508 if (mtu == -1) 6509 mtu = QIB_DEFAULT_MTU; 6510 6511 dd->cspec->int_enable_mask = QIB_I_BITSEXTANT; 6512 /* all hwerrors become interrupts, unless special purposed */ 6513 dd->cspec->hwerrmask = ~0ULL; 6514 /* link_recovery setup causes these errors, so ignore them, 6515 * other than clearing them when they occur */ 6516 dd->cspec->hwerrmask &= 6517 ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) | 6518 SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) | 6519 HWE_MASK(LATriggered)); 6520 6521 for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) { 6522 struct qib_chippport_specific *cp = ppd->cpspec; 6523 6524 ppd->link_speed_supported = features & PORT_SPD_CAP; 6525 features >>= PORT_SPD_CAP_SHIFT; 6526 if (!ppd->link_speed_supported) { 6527 /* single port mode (7340, or configured) */ 6528 dd->skip_kctxt_mask |= 1 << pidx; 6529 if (pidx == 0) { 6530 /* Make sure port is disabled. */ 6531 qib_write_kreg_port(ppd, krp_rcvctrl, 0); 6532 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); 6533 ppd[0] = ppd[1]; 6534 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, 6535 IBSerdesPClkNotDetectMask_0) 6536 | SYM_MASK(HwErrMask, 6537 SDmaMemReadErrMask_0)); 6538 dd->cspec->int_enable_mask &= ~( 6539 SYM_MASK(IntMask, SDmaCleanupDoneMask_0) | 6540 SYM_MASK(IntMask, SDmaIdleIntMask_0) | 6541 SYM_MASK(IntMask, SDmaProgressIntMask_0) | 6542 SYM_MASK(IntMask, SDmaIntMask_0) | 6543 SYM_MASK(IntMask, ErrIntMask_0) | 6544 SYM_MASK(IntMask, SendDoneIntMask_0)); 6545 } else { 6546 /* Make sure port is disabled. */ 6547 qib_write_kreg_port(ppd, krp_rcvctrl, 0); 6548 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); 6549 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, 6550 IBSerdesPClkNotDetectMask_1) 6551 | SYM_MASK(HwErrMask, 6552 SDmaMemReadErrMask_1)); 6553 dd->cspec->int_enable_mask &= ~( 6554 SYM_MASK(IntMask, SDmaCleanupDoneMask_1) | 6555 SYM_MASK(IntMask, SDmaIdleIntMask_1) | 6556 SYM_MASK(IntMask, SDmaProgressIntMask_1) | 6557 SYM_MASK(IntMask, SDmaIntMask_1) | 6558 SYM_MASK(IntMask, ErrIntMask_1) | 6559 SYM_MASK(IntMask, SendDoneIntMask_1)); 6560 } 6561 continue; 6562 } 6563 6564 dd->num_pports++; 6565 ret = qib_init_pportdata(ppd, dd, pidx, dd->num_pports); 6566 if (ret) { 6567 dd->num_pports--; 6568 goto bail; 6569 } 6570 6571 ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; 6572 ppd->link_width_enabled = IB_WIDTH_4X; 6573 ppd->link_speed_enabled = ppd->link_speed_supported; 6574 /* 6575 * Set the initial values to reasonable default, will be set 6576 * for real when link is up. 6577 */ 6578 ppd->link_width_active = IB_WIDTH_4X; 6579 ppd->link_speed_active = QIB_IB_SDR; 6580 ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS]; 6581 switch (qib_num_cfg_vls) { 6582 case 1: 6583 ppd->vls_supported = IB_VL_VL0; 6584 break; 6585 case 2: 6586 ppd->vls_supported = IB_VL_VL0_1; 6587 break; 6588 default: 6589 qib_devinfo(dd->pcidev, 6590 "Invalid num_vls %u, using 4 VLs\n", 6591 qib_num_cfg_vls); 6592 qib_num_cfg_vls = 4; 6593 /* fall through */ 6594 case 4: 6595 ppd->vls_supported = IB_VL_VL0_3; 6596 break; 6597 case 8: 6598 if (mtu <= 2048) 6599 ppd->vls_supported = IB_VL_VL0_7; 6600 else { 6601 qib_devinfo(dd->pcidev, 6602 "Invalid num_vls %u for MTU %d , using 4 VLs\n", 6603 qib_num_cfg_vls, mtu); 6604 ppd->vls_supported = IB_VL_VL0_3; 6605 qib_num_cfg_vls = 4; 6606 } 6607 break; 6608 } 6609 ppd->vls_operational = ppd->vls_supported; 6610 6611 init_waitqueue_head(&cp->autoneg_wait); 6612 INIT_DELAYED_WORK(&cp->autoneg_work, 6613 autoneg_7322_work); 6614 if (ppd->dd->cspec->r1) 6615 INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work); 6616 6617 /* 6618 * For Mez and similar cards, no qsfp info, so do 6619 * the "cable info" setup here. Can be overridden 6620 * in adapter-specific routines. 6621 */ 6622 if (!(dd->flags & QIB_HAS_QSFP)) { 6623 if (!IS_QMH(dd) && !IS_QME(dd)) 6624 qib_devinfo(dd->pcidev, 6625 "IB%u:%u: Unknown mezzanine card type\n", 6626 dd->unit, ppd->port); 6627 cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME; 6628 /* 6629 * Choose center value as default tx serdes setting 6630 * until changed through module parameter. 6631 */ 6632 ppd->cpspec->no_eep = IS_QMH(dd) ? 6633 TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4; 6634 } else 6635 cp->h1_val = H1_FORCE_VAL; 6636 6637 /* Avoid writes to chip for mini_init */ 6638 if (!qib_mini_init) 6639 write_7322_init_portregs(ppd); 6640 6641 init_timer(&cp->chase_timer); 6642 cp->chase_timer.function = reenable_chase; 6643 cp->chase_timer.data = (unsigned long)ppd; 6644 6645 ppd++; 6646 } 6647 6648 dd->rcvhdrentsize = qib_rcvhdrentsize ? 6649 qib_rcvhdrentsize : QIB_RCVHDR_ENTSIZE; 6650 dd->rcvhdrsize = qib_rcvhdrsize ? 6651 qib_rcvhdrsize : QIB_DFLT_RCVHDRSIZE; 6652 dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); 6653 6654 /* we always allocate at least 2048 bytes for eager buffers */ 6655 dd->rcvegrbufsize = max(mtu, 2048); 6656 BUG_ON(!is_power_of_2(dd->rcvegrbufsize)); 6657 dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize); 6658 6659 qib_7322_tidtemplate(dd); 6660 6661 /* 6662 * We can request a receive interrupt for 1 or 6663 * more packets from current offset. 6664 */ 6665 dd->rhdrhead_intr_off = 6666 (u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT; 6667 6668 /* setup the stats timer; the add_timer is done at end of init */ 6669 init_timer(&dd->stats_timer); 6670 dd->stats_timer.function = qib_get_7322_faststats; 6671 dd->stats_timer.data = (unsigned long) dd; 6672 6673 dd->ureg_align = 0x10000; /* 64KB alignment */ 6674 6675 dd->piosize2kmax_dwords = dd->piosize2k >> 2; 6676 6677 qib_7322_config_ctxts(dd); 6678 qib_set_ctxtcnt(dd); 6679 6680 if (qib_wc_pat) { 6681 resource_size_t vl15off; 6682 /* 6683 * We do not set WC on the VL15 buffers to avoid 6684 * a rare problem with unaligned writes from 6685 * interrupt-flushed store buffers, so we need 6686 * to map those separately here. We can't solve 6687 * this for the rarely used mtrr case. 6688 */ 6689 ret = init_chip_wc_pat(dd, 0); 6690 if (ret) 6691 goto bail; 6692 6693 /* vl15 buffers start just after the 4k buffers */ 6694 vl15off = dd->physaddr + (dd->piobufbase >> 32) + 6695 dd->piobcnt4k * dd->align4k; 6696 dd->piovl15base = ioremap_nocache(vl15off, 6697 NUM_VL15_BUFS * dd->align4k); 6698 if (!dd->piovl15base) { 6699 ret = -ENOMEM; 6700 goto bail; 6701 } 6702 } 6703 qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ 6704 6705 ret = 0; 6706 if (qib_mini_init) 6707 goto bail; 6708 if (!dd->num_pports) { 6709 qib_dev_err(dd, "No ports enabled, giving up initialization\n"); 6710 goto bail; /* no error, so can still figure out why err */ 6711 } 6712 6713 write_7322_initregs(dd); 6714 ret = qib_create_ctxts(dd); 6715 init_7322_cntrnames(dd); 6716 6717 updthresh = 8U; /* update threshold */ 6718 6719 /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA. 6720 * reserve the update threshold amount for other kernel use, such 6721 * as sending SMI, MAD, and ACKs, or 3, whichever is greater, 6722 * unless we aren't enabling SDMA, in which case we want to use 6723 * all the 4k bufs for the kernel. 6724 * if this was less than the update threshold, we could wait 6725 * a long time for an update. Coded this way because we 6726 * sometimes change the update threshold for various reasons, 6727 * and we want this to remain robust. 6728 */ 6729 if (dd->flags & QIB_HAS_SEND_DMA) { 6730 dd->cspec->sdmabufcnt = dd->piobcnt4k; 6731 sbufs = updthresh > 3 ? updthresh : 3; 6732 } else { 6733 dd->cspec->sdmabufcnt = 0; 6734 sbufs = dd->piobcnt4k; 6735 } 6736 dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k - 6737 dd->cspec->sdmabufcnt; 6738 dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs; 6739 dd->cspec->lastbuf_for_pio--; /* range is <= , not < */ 6740 dd->last_pio = dd->cspec->lastbuf_for_pio; 6741 dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ? 6742 dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0; 6743 6744 /* 6745 * If we have 16 user contexts, we will have 7 sbufs 6746 * per context, so reduce the update threshold to match. We 6747 * want to update before we actually run out, at low pbufs/ctxt 6748 * so give ourselves some margin. 6749 */ 6750 if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh) 6751 updthresh = dd->pbufsctxt - 2; 6752 dd->cspec->updthresh_dflt = updthresh; 6753 dd->cspec->updthresh = updthresh; 6754 6755 /* before full enable, no interrupts, no locking needed */ 6756 dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) 6757 << SYM_LSB(SendCtrl, AvailUpdThld)) | 6758 SYM_MASK(SendCtrl, SendBufAvailPad64Byte); 6759 6760 dd->psxmitwait_supported = 1; 6761 dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE; 6762 bail: 6763 if (!dd->ctxtcnt) 6764 dd->ctxtcnt = 1; /* for other initialization code */ 6765 6766 return ret; 6767 } 6768 6769 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc, 6770 u32 *pbufnum) 6771 { 6772 u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; 6773 struct qib_devdata *dd = ppd->dd; 6774 6775 /* last is same for 2k and 4k, because we use 4k if all 2k busy */ 6776 if (pbc & PBC_7322_VL15_SEND) { 6777 first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx; 6778 last = first; 6779 } else { 6780 if ((plen + 1) > dd->piosize2kmax_dwords) 6781 first = dd->piobcnt2k; 6782 else 6783 first = 0; 6784 last = dd->cspec->lastbuf_for_pio; 6785 } 6786 return qib_getsendbuf_range(dd, pbufnum, first, last); 6787 } 6788 6789 static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv, 6790 u32 start) 6791 { 6792 qib_write_kreg_port(ppd, krp_psinterval, intv); 6793 qib_write_kreg_port(ppd, krp_psstart, start); 6794 } 6795 6796 /* 6797 * Must be called with sdma_lock held, or before init finished. 6798 */ 6799 static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) 6800 { 6801 qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt); 6802 } 6803 6804 /* 6805 * sdma_lock should be acquired before calling this routine 6806 */ 6807 static void dump_sdma_7322_state(struct qib_pportdata *ppd) 6808 { 6809 u64 reg, reg1, reg2; 6810 6811 reg = qib_read_kreg_port(ppd, krp_senddmastatus); 6812 qib_dev_porterr(ppd->dd, ppd->port, 6813 "SDMA senddmastatus: 0x%016llx\n", reg); 6814 6815 reg = qib_read_kreg_port(ppd, krp_sendctrl); 6816 qib_dev_porterr(ppd->dd, ppd->port, 6817 "SDMA sendctrl: 0x%016llx\n", reg); 6818 6819 reg = qib_read_kreg_port(ppd, krp_senddmabase); 6820 qib_dev_porterr(ppd->dd, ppd->port, 6821 "SDMA senddmabase: 0x%016llx\n", reg); 6822 6823 reg = qib_read_kreg_port(ppd, krp_senddmabufmask0); 6824 reg1 = qib_read_kreg_port(ppd, krp_senddmabufmask1); 6825 reg2 = qib_read_kreg_port(ppd, krp_senddmabufmask2); 6826 qib_dev_porterr(ppd->dd, ppd->port, 6827 "SDMA senddmabufmask 0:%llx 1:%llx 2:%llx\n", 6828 reg, reg1, reg2); 6829 6830 /* get bufuse bits, clear them, and print them again if non-zero */ 6831 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); 6832 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg); 6833 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); 6834 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg1); 6835 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); 6836 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg2); 6837 /* 0 and 1 should always be zero, so print as short form */ 6838 qib_dev_porterr(ppd->dd, ppd->port, 6839 "SDMA current senddmabuf_use 0:%llx 1:%llx 2:%llx\n", 6840 reg, reg1, reg2); 6841 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); 6842 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); 6843 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); 6844 /* 0 and 1 should always be zero, so print as short form */ 6845 qib_dev_porterr(ppd->dd, ppd->port, 6846 "SDMA cleared senddmabuf_use 0:%llx 1:%llx 2:%llx\n", 6847 reg, reg1, reg2); 6848 6849 reg = qib_read_kreg_port(ppd, krp_senddmatail); 6850 qib_dev_porterr(ppd->dd, ppd->port, 6851 "SDMA senddmatail: 0x%016llx\n", reg); 6852 6853 reg = qib_read_kreg_port(ppd, krp_senddmahead); 6854 qib_dev_porterr(ppd->dd, ppd->port, 6855 "SDMA senddmahead: 0x%016llx\n", reg); 6856 6857 reg = qib_read_kreg_port(ppd, krp_senddmaheadaddr); 6858 qib_dev_porterr(ppd->dd, ppd->port, 6859 "SDMA senddmaheadaddr: 0x%016llx\n", reg); 6860 6861 reg = qib_read_kreg_port(ppd, krp_senddmalengen); 6862 qib_dev_porterr(ppd->dd, ppd->port, 6863 "SDMA senddmalengen: 0x%016llx\n", reg); 6864 6865 reg = qib_read_kreg_port(ppd, krp_senddmadesccnt); 6866 qib_dev_porterr(ppd->dd, ppd->port, 6867 "SDMA senddmadesccnt: 0x%016llx\n", reg); 6868 6869 reg = qib_read_kreg_port(ppd, krp_senddmaidlecnt); 6870 qib_dev_porterr(ppd->dd, ppd->port, 6871 "SDMA senddmaidlecnt: 0x%016llx\n", reg); 6872 6873 reg = qib_read_kreg_port(ppd, krp_senddmaprioritythld); 6874 qib_dev_porterr(ppd->dd, ppd->port, 6875 "SDMA senddmapriorityhld: 0x%016llx\n", reg); 6876 6877 reg = qib_read_kreg_port(ppd, krp_senddmareloadcnt); 6878 qib_dev_porterr(ppd->dd, ppd->port, 6879 "SDMA senddmareloadcnt: 0x%016llx\n", reg); 6880 6881 dump_sdma_state(ppd); 6882 } 6883 6884 static struct sdma_set_state_action sdma_7322_action_table[] = { 6885 [qib_sdma_state_s00_hw_down] = { 6886 .go_s99_running_tofalse = 1, 6887 .op_enable = 0, 6888 .op_intenable = 0, 6889 .op_halt = 0, 6890 .op_drain = 0, 6891 }, 6892 [qib_sdma_state_s10_hw_start_up_wait] = { 6893 .op_enable = 0, 6894 .op_intenable = 1, 6895 .op_halt = 1, 6896 .op_drain = 0, 6897 }, 6898 [qib_sdma_state_s20_idle] = { 6899 .op_enable = 1, 6900 .op_intenable = 1, 6901 .op_halt = 1, 6902 .op_drain = 0, 6903 }, 6904 [qib_sdma_state_s30_sw_clean_up_wait] = { 6905 .op_enable = 0, 6906 .op_intenable = 1, 6907 .op_halt = 1, 6908 .op_drain = 0, 6909 }, 6910 [qib_sdma_state_s40_hw_clean_up_wait] = { 6911 .op_enable = 1, 6912 .op_intenable = 1, 6913 .op_halt = 1, 6914 .op_drain = 0, 6915 }, 6916 [qib_sdma_state_s50_hw_halt_wait] = { 6917 .op_enable = 1, 6918 .op_intenable = 1, 6919 .op_halt = 1, 6920 .op_drain = 1, 6921 }, 6922 [qib_sdma_state_s99_running] = { 6923 .op_enable = 1, 6924 .op_intenable = 1, 6925 .op_halt = 0, 6926 .op_drain = 0, 6927 .go_s99_running_totrue = 1, 6928 }, 6929 }; 6930 6931 static void qib_7322_sdma_init_early(struct qib_pportdata *ppd) 6932 { 6933 ppd->sdma_state.set_state_action = sdma_7322_action_table; 6934 } 6935 6936 static int init_sdma_7322_regs(struct qib_pportdata *ppd) 6937 { 6938 struct qib_devdata *dd = ppd->dd; 6939 unsigned lastbuf, erstbuf; 6940 u64 senddmabufmask[3] = { 0 }; 6941 int n, ret = 0; 6942 6943 qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys); 6944 qib_sdma_7322_setlengen(ppd); 6945 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ 6946 qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt); 6947 qib_write_kreg_port(ppd, krp_senddmadesccnt, 0); 6948 qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys); 6949 6950 if (dd->num_pports) 6951 n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */ 6952 else 6953 n = dd->cspec->sdmabufcnt; /* failsafe for init */ 6954 erstbuf = (dd->piobcnt2k + dd->piobcnt4k) - 6955 ((dd->num_pports == 1 || ppd->port == 2) ? n : 6956 dd->cspec->sdmabufcnt); 6957 lastbuf = erstbuf + n; 6958 6959 ppd->sdma_state.first_sendbuf = erstbuf; 6960 ppd->sdma_state.last_sendbuf = lastbuf; 6961 for (; erstbuf < lastbuf; ++erstbuf) { 6962 unsigned word = erstbuf / BITS_PER_LONG; 6963 unsigned bit = erstbuf & (BITS_PER_LONG - 1); 6964 6965 BUG_ON(word >= 3); 6966 senddmabufmask[word] |= 1ULL << bit; 6967 } 6968 qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]); 6969 qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]); 6970 qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]); 6971 return ret; 6972 } 6973 6974 /* sdma_lock must be held */ 6975 static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd) 6976 { 6977 struct qib_devdata *dd = ppd->dd; 6978 int sane; 6979 int use_dmahead; 6980 u16 swhead; 6981 u16 swtail; 6982 u16 cnt; 6983 u16 hwhead; 6984 6985 use_dmahead = __qib_sdma_running(ppd) && 6986 (dd->flags & QIB_HAS_SDMA_TIMEOUT); 6987 retry: 6988 hwhead = use_dmahead ? 6989 (u16) le64_to_cpu(*ppd->sdma_head_dma) : 6990 (u16) qib_read_kreg_port(ppd, krp_senddmahead); 6991 6992 swhead = ppd->sdma_descq_head; 6993 swtail = ppd->sdma_descq_tail; 6994 cnt = ppd->sdma_descq_cnt; 6995 6996 if (swhead < swtail) 6997 /* not wrapped */ 6998 sane = (hwhead >= swhead) & (hwhead <= swtail); 6999 else if (swhead > swtail) 7000 /* wrapped around */ 7001 sane = ((hwhead >= swhead) && (hwhead < cnt)) || 7002 (hwhead <= swtail); 7003 else 7004 /* empty */ 7005 sane = (hwhead == swhead); 7006 7007 if (unlikely(!sane)) { 7008 if (use_dmahead) { 7009 /* try one more time, directly from the register */ 7010 use_dmahead = 0; 7011 goto retry; 7012 } 7013 /* proceed as if no progress */ 7014 hwhead = swhead; 7015 } 7016 7017 return hwhead; 7018 } 7019 7020 static int qib_sdma_7322_busy(struct qib_pportdata *ppd) 7021 { 7022 u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus); 7023 7024 return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) || 7025 (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) || 7026 !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) || 7027 !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty)); 7028 } 7029 7030 /* 7031 * Compute the amount of delay before sending the next packet if the 7032 * port's send rate differs from the static rate set for the QP. 7033 * The delay affects the next packet and the amount of the delay is 7034 * based on the length of the this packet. 7035 */ 7036 static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen, 7037 u8 srate, u8 vl) 7038 { 7039 u8 snd_mult = ppd->delay_mult; 7040 u8 rcv_mult = ib_rate_to_delay[srate]; 7041 u32 ret; 7042 7043 ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0; 7044 7045 /* Indicate VL15, else set the VL in the control word */ 7046 if (vl == 15) 7047 ret |= PBC_7322_VL15_SEND_CTRL; 7048 else 7049 ret |= vl << PBC_VL_NUM_LSB; 7050 ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB; 7051 7052 return ret; 7053 } 7054 7055 /* 7056 * Enable the per-port VL15 send buffers for use. 7057 * They follow the rest of the buffers, without a config parameter. 7058 * This was in initregs, but that is done before the shadow 7059 * is set up, and this has to be done after the shadow is 7060 * set up. 7061 */ 7062 static void qib_7322_initvl15_bufs(struct qib_devdata *dd) 7063 { 7064 unsigned vl15bufs; 7065 7066 vl15bufs = dd->piobcnt2k + dd->piobcnt4k; 7067 qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS, 7068 TXCHK_CHG_TYPE_KERN, NULL); 7069 } 7070 7071 static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd) 7072 { 7073 if (rcd->ctxt < NUM_IB_PORTS) { 7074 if (rcd->dd->num_pports > 1) { 7075 rcd->rcvegrcnt = KCTXT0_EGRCNT / 2; 7076 rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0; 7077 } else { 7078 rcd->rcvegrcnt = KCTXT0_EGRCNT; 7079 rcd->rcvegr_tid_base = 0; 7080 } 7081 } else { 7082 rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt; 7083 rcd->rcvegr_tid_base = KCTXT0_EGRCNT + 7084 (rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt; 7085 } 7086 } 7087 7088 #define QTXSLEEPS 5000 7089 static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start, 7090 u32 len, u32 which, struct qib_ctxtdata *rcd) 7091 { 7092 int i; 7093 const int last = start + len - 1; 7094 const int lastr = last / BITS_PER_LONG; 7095 u32 sleeps = 0; 7096 int wait = rcd != NULL; 7097 unsigned long flags; 7098 7099 while (wait) { 7100 unsigned long shadow; 7101 int cstart, previ = -1; 7102 7103 /* 7104 * when flipping from kernel to user, we can't change 7105 * the checking type if the buffer is allocated to the 7106 * driver. It's OK the other direction, because it's 7107 * from close, and we have just disarm'ed all the 7108 * buffers. All the kernel to kernel changes are also 7109 * OK. 7110 */ 7111 for (cstart = start; cstart <= last; cstart++) { 7112 i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) 7113 / BITS_PER_LONG; 7114 if (i != previ) { 7115 shadow = (unsigned long) 7116 le64_to_cpu(dd->pioavailregs_dma[i]); 7117 previ = i; 7118 } 7119 if (test_bit(((2 * cstart) + 7120 QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) 7121 % BITS_PER_LONG, &shadow)) 7122 break; 7123 } 7124 7125 if (cstart > last) 7126 break; 7127 7128 if (sleeps == QTXSLEEPS) 7129 break; 7130 /* make sure we see an updated copy next time around */ 7131 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7132 sleeps++; 7133 msleep(20); 7134 } 7135 7136 switch (which) { 7137 case TXCHK_CHG_TYPE_DIS1: 7138 /* 7139 * disable checking on a range; used by diags; just 7140 * one buffer, but still written generically 7141 */ 7142 for (i = start; i <= last; i++) 7143 clear_bit(i, dd->cspec->sendchkenable); 7144 break; 7145 7146 case TXCHK_CHG_TYPE_ENAB1: 7147 /* 7148 * (re)enable checking on a range; used by diags; just 7149 * one buffer, but still written generically; read 7150 * scratch to be sure buffer actually triggered, not 7151 * just flushed from processor. 7152 */ 7153 qib_read_kreg32(dd, kr_scratch); 7154 for (i = start; i <= last; i++) 7155 set_bit(i, dd->cspec->sendchkenable); 7156 break; 7157 7158 case TXCHK_CHG_TYPE_KERN: 7159 /* usable by kernel */ 7160 for (i = start; i <= last; i++) { 7161 set_bit(i, dd->cspec->sendibchk); 7162 clear_bit(i, dd->cspec->sendgrhchk); 7163 } 7164 spin_lock_irqsave(&dd->uctxt_lock, flags); 7165 /* see if we need to raise avail update threshold */ 7166 for (i = dd->first_user_ctxt; 7167 dd->cspec->updthresh != dd->cspec->updthresh_dflt 7168 && i < dd->cfgctxts; i++) 7169 if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt && 7170 ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1) 7171 < dd->cspec->updthresh_dflt) 7172 break; 7173 spin_unlock_irqrestore(&dd->uctxt_lock, flags); 7174 if (i == dd->cfgctxts) { 7175 spin_lock_irqsave(&dd->sendctrl_lock, flags); 7176 dd->cspec->updthresh = dd->cspec->updthresh_dflt; 7177 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); 7178 dd->sendctrl |= (dd->cspec->updthresh & 7179 SYM_RMASK(SendCtrl, AvailUpdThld)) << 7180 SYM_LSB(SendCtrl, AvailUpdThld); 7181 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7182 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7183 } 7184 break; 7185 7186 case TXCHK_CHG_TYPE_USER: 7187 /* for user process */ 7188 for (i = start; i <= last; i++) { 7189 clear_bit(i, dd->cspec->sendibchk); 7190 set_bit(i, dd->cspec->sendgrhchk); 7191 } 7192 spin_lock_irqsave(&dd->sendctrl_lock, flags); 7193 if (rcd && rcd->subctxt_cnt && ((rcd->piocnt 7194 / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) { 7195 dd->cspec->updthresh = (rcd->piocnt / 7196 rcd->subctxt_cnt) - 1; 7197 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); 7198 dd->sendctrl |= (dd->cspec->updthresh & 7199 SYM_RMASK(SendCtrl, AvailUpdThld)) 7200 << SYM_LSB(SendCtrl, AvailUpdThld); 7201 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7202 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7203 } else 7204 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7205 break; 7206 7207 default: 7208 break; 7209 } 7210 7211 for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i) 7212 qib_write_kreg(dd, kr_sendcheckmask + i, 7213 dd->cspec->sendchkenable[i]); 7214 7215 for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) { 7216 qib_write_kreg(dd, kr_sendgrhcheckmask + i, 7217 dd->cspec->sendgrhchk[i]); 7218 qib_write_kreg(dd, kr_sendibpktmask + i, 7219 dd->cspec->sendibchk[i]); 7220 } 7221 7222 /* 7223 * Be sure whatever we did was seen by the chip and acted upon, 7224 * before we return. Mostly important for which >= 2. 7225 */ 7226 qib_read_kreg32(dd, kr_scratch); 7227 } 7228 7229 7230 /* useful for trigger analyzers, etc. */ 7231 static void writescratch(struct qib_devdata *dd, u32 val) 7232 { 7233 qib_write_kreg(dd, kr_scratch, val); 7234 } 7235 7236 /* Dummy for now, use chip regs soon */ 7237 static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum) 7238 { 7239 return -ENXIO; 7240 } 7241 7242 /** 7243 * qib_init_iba7322_funcs - set up the chip-specific function pointers 7244 * @dev: the pci_dev for qlogic_ib device 7245 * @ent: pci_device_id struct for this dev 7246 * 7247 * Also allocates, inits, and returns the devdata struct for this 7248 * device instance 7249 * 7250 * This is global, and is called directly at init to set up the 7251 * chip-specific function pointers for later use. 7252 */ 7253 struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev, 7254 const struct pci_device_id *ent) 7255 { 7256 struct qib_devdata *dd; 7257 int ret, i; 7258 u32 tabsize, actual_cnt = 0; 7259 7260 dd = qib_alloc_devdata(pdev, 7261 NUM_IB_PORTS * sizeof(struct qib_pportdata) + 7262 sizeof(struct qib_chip_specific) + 7263 NUM_IB_PORTS * sizeof(struct qib_chippport_specific)); 7264 if (IS_ERR(dd)) 7265 goto bail; 7266 7267 dd->f_bringup_serdes = qib_7322_bringup_serdes; 7268 dd->f_cleanup = qib_setup_7322_cleanup; 7269 dd->f_clear_tids = qib_7322_clear_tids; 7270 dd->f_free_irq = qib_7322_free_irq; 7271 dd->f_get_base_info = qib_7322_get_base_info; 7272 dd->f_get_msgheader = qib_7322_get_msgheader; 7273 dd->f_getsendbuf = qib_7322_getsendbuf; 7274 dd->f_gpio_mod = gpio_7322_mod; 7275 dd->f_eeprom_wen = qib_7322_eeprom_wen; 7276 dd->f_hdrqempty = qib_7322_hdrqempty; 7277 dd->f_ib_updown = qib_7322_ib_updown; 7278 dd->f_init_ctxt = qib_7322_init_ctxt; 7279 dd->f_initvl15_bufs = qib_7322_initvl15_bufs; 7280 dd->f_intr_fallback = qib_7322_intr_fallback; 7281 dd->f_late_initreg = qib_late_7322_initreg; 7282 dd->f_setpbc_control = qib_7322_setpbc_control; 7283 dd->f_portcntr = qib_portcntr_7322; 7284 dd->f_put_tid = qib_7322_put_tid; 7285 dd->f_quiet_serdes = qib_7322_mini_quiet_serdes; 7286 dd->f_rcvctrl = rcvctrl_7322_mod; 7287 dd->f_read_cntrs = qib_read_7322cntrs; 7288 dd->f_read_portcntrs = qib_read_7322portcntrs; 7289 dd->f_reset = qib_do_7322_reset; 7290 dd->f_init_sdma_regs = init_sdma_7322_regs; 7291 dd->f_sdma_busy = qib_sdma_7322_busy; 7292 dd->f_sdma_gethead = qib_sdma_7322_gethead; 7293 dd->f_sdma_sendctrl = qib_7322_sdma_sendctrl; 7294 dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt; 7295 dd->f_sdma_update_tail = qib_sdma_update_7322_tail; 7296 dd->f_sendctrl = sendctrl_7322_mod; 7297 dd->f_set_armlaunch = qib_set_7322_armlaunch; 7298 dd->f_set_cntr_sample = qib_set_cntr_7322_sample; 7299 dd->f_iblink_state = qib_7322_iblink_state; 7300 dd->f_ibphys_portstate = qib_7322_phys_portstate; 7301 dd->f_get_ib_cfg = qib_7322_get_ib_cfg; 7302 dd->f_set_ib_cfg = qib_7322_set_ib_cfg; 7303 dd->f_set_ib_loopback = qib_7322_set_loopback; 7304 dd->f_get_ib_table = qib_7322_get_ib_table; 7305 dd->f_set_ib_table = qib_7322_set_ib_table; 7306 dd->f_set_intr_state = qib_7322_set_intr_state; 7307 dd->f_setextled = qib_setup_7322_setextled; 7308 dd->f_txchk_change = qib_7322_txchk_change; 7309 dd->f_update_usrhead = qib_update_7322_usrhead; 7310 dd->f_wantpiobuf_intr = qib_wantpiobuf_7322_intr; 7311 dd->f_xgxs_reset = qib_7322_mini_pcs_reset; 7312 dd->f_sdma_hw_clean_up = qib_7322_sdma_hw_clean_up; 7313 dd->f_sdma_hw_start_up = qib_7322_sdma_hw_start_up; 7314 dd->f_sdma_init_early = qib_7322_sdma_init_early; 7315 dd->f_writescratch = writescratch; 7316 dd->f_tempsense_rd = qib_7322_tempsense_rd; 7317 #ifdef CONFIG_INFINIBAND_QIB_DCA 7318 dd->f_notify_dca = qib_7322_notify_dca; 7319 #endif 7320 /* 7321 * Do remaining PCIe setup and save PCIe values in dd. 7322 * Any error printing is already done by the init code. 7323 * On return, we have the chip mapped, but chip registers 7324 * are not set up until start of qib_init_7322_variables. 7325 */ 7326 ret = qib_pcie_ddinit(dd, pdev, ent); 7327 if (ret < 0) 7328 goto bail_free; 7329 7330 /* initialize chip-specific variables */ 7331 ret = qib_init_7322_variables(dd); 7332 if (ret) 7333 goto bail_cleanup; 7334 7335 if (qib_mini_init || !dd->num_pports) 7336 goto bail; 7337 7338 /* 7339 * Determine number of vectors we want; depends on port count 7340 * and number of configured kernel receive queues actually used. 7341 * Should also depend on whether sdma is enabled or not, but 7342 * that's such a rare testing case it's not worth worrying about. 7343 */ 7344 tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table); 7345 for (i = 0; i < tabsize; i++) 7346 if ((i < ARRAY_SIZE(irq_table) && 7347 irq_table[i].port <= dd->num_pports) || 7348 (i >= ARRAY_SIZE(irq_table) && 7349 dd->rcd[i - ARRAY_SIZE(irq_table)])) 7350 actual_cnt++; 7351 /* reduce by ctxt's < 2 */ 7352 if (qib_krcvq01_no_msi) 7353 actual_cnt -= dd->num_pports; 7354 7355 tabsize = actual_cnt; 7356 dd->cspec->msix_entries = kzalloc(tabsize * 7357 sizeof(struct qib_msix_entry), GFP_KERNEL); 7358 if (!dd->cspec->msix_entries) { 7359 qib_dev_err(dd, "No memory for MSIx table\n"); 7360 tabsize = 0; 7361 } 7362 for (i = 0; i < tabsize; i++) 7363 dd->cspec->msix_entries[i].msix.entry = i; 7364 7365 if (qib_pcie_params(dd, 8, &tabsize, dd->cspec->msix_entries)) 7366 qib_dev_err(dd, 7367 "Failed to setup PCIe or interrupts; continuing anyway\n"); 7368 /* may be less than we wanted, if not enough available */ 7369 dd->cspec->num_msix_entries = tabsize; 7370 7371 /* setup interrupt handler */ 7372 qib_setup_7322_interrupt(dd, 1); 7373 7374 /* clear diagctrl register, in case diags were running and crashed */ 7375 qib_write_kreg(dd, kr_hwdiagctrl, 0); 7376 #ifdef CONFIG_INFINIBAND_QIB_DCA 7377 if (!dca_add_requester(&pdev->dev)) { 7378 qib_devinfo(dd->pcidev, "DCA enabled\n"); 7379 dd->flags |= QIB_DCA_ENABLED; 7380 qib_setup_dca(dd); 7381 } 7382 #endif 7383 goto bail; 7384 7385 bail_cleanup: 7386 qib_pcie_ddcleanup(dd); 7387 bail_free: 7388 qib_free_devdata(dd); 7389 dd = ERR_PTR(ret); 7390 bail: 7391 return dd; 7392 } 7393 7394 /* 7395 * Set the table entry at the specified index from the table specifed. 7396 * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first 7397 * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR. 7398 * 'idx' below addresses the correct entry, while its 4 LSBs select the 7399 * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table. 7400 */ 7401 #define DDS_ENT_AMP_LSB 14 7402 #define DDS_ENT_MAIN_LSB 9 7403 #define DDS_ENT_POST_LSB 5 7404 #define DDS_ENT_PRE_XTRA_LSB 3 7405 #define DDS_ENT_PRE_LSB 0 7406 7407 /* 7408 * Set one entry in the TxDDS table for spec'd port 7409 * ridx picks one of the entries, while tp points 7410 * to the appropriate table entry. 7411 */ 7412 static void set_txdds(struct qib_pportdata *ppd, int ridx, 7413 const struct txdds_ent *tp) 7414 { 7415 struct qib_devdata *dd = ppd->dd; 7416 u32 pack_ent; 7417 int regidx; 7418 7419 /* Get correct offset in chip-space, and in source table */ 7420 regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx; 7421 /* 7422 * We do not use qib_write_kreg_port() because it was intended 7423 * only for registers in the lower "port specific" pages. 7424 * So do index calculation by hand. 7425 */ 7426 if (ppd->hw_pidx) 7427 regidx += (dd->palign / sizeof(u64)); 7428 7429 pack_ent = tp->amp << DDS_ENT_AMP_LSB; 7430 pack_ent |= tp->main << DDS_ENT_MAIN_LSB; 7431 pack_ent |= tp->pre << DDS_ENT_PRE_LSB; 7432 pack_ent |= tp->post << DDS_ENT_POST_LSB; 7433 qib_write_kreg(dd, regidx, pack_ent); 7434 /* Prevent back-to-back writes by hitting scratch */ 7435 qib_write_kreg(ppd->dd, kr_scratch, 0); 7436 } 7437 7438 static const struct vendor_txdds_ent vendor_txdds[] = { 7439 { /* Amphenol 1m 30awg NoEq */ 7440 { 0x41, 0x50, 0x48 }, "584470002 ", 7441 { 10, 0, 0, 5 }, { 10, 0, 0, 9 }, { 7, 1, 0, 13 }, 7442 }, 7443 { /* Amphenol 3m 28awg NoEq */ 7444 { 0x41, 0x50, 0x48 }, "584470004 ", 7445 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 7, 15 }, 7446 }, 7447 { /* Finisar 3m OM2 Optical */ 7448 { 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL", 7449 { 0, 0, 0, 3 }, { 0, 0, 0, 4 }, { 0, 0, 0, 13 }, 7450 }, 7451 { /* Finisar 30m OM2 Optical */ 7452 { 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL", 7453 { 0, 0, 0, 1 }, { 0, 0, 0, 5 }, { 0, 0, 0, 11 }, 7454 }, 7455 { /* Finisar Default OM2 Optical */ 7456 { 0x00, 0x90, 0x65 }, NULL, 7457 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 0, 0, 12 }, 7458 }, 7459 { /* Gore 1m 30awg NoEq */ 7460 { 0x00, 0x21, 0x77 }, "QSN3300-1 ", 7461 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 0, 15 }, 7462 }, 7463 { /* Gore 2m 30awg NoEq */ 7464 { 0x00, 0x21, 0x77 }, "QSN3300-2 ", 7465 { 0, 0, 0, 8 }, { 0, 0, 0, 10 }, { 0, 1, 7, 15 }, 7466 }, 7467 { /* Gore 1m 28awg NoEq */ 7468 { 0x00, 0x21, 0x77 }, "QSN3800-1 ", 7469 { 0, 0, 0, 6 }, { 0, 0, 0, 8 }, { 0, 1, 0, 15 }, 7470 }, 7471 { /* Gore 3m 28awg NoEq */ 7472 { 0x00, 0x21, 0x77 }, "QSN3800-3 ", 7473 { 0, 0, 0, 9 }, { 0, 0, 0, 13 }, { 0, 1, 7, 15 }, 7474 }, 7475 { /* Gore 5m 24awg Eq */ 7476 { 0x00, 0x21, 0x77 }, "QSN7000-5 ", 7477 { 0, 0, 0, 7 }, { 0, 0, 0, 9 }, { 0, 1, 3, 15 }, 7478 }, 7479 { /* Gore 7m 24awg Eq */ 7480 { 0x00, 0x21, 0x77 }, "QSN7000-7 ", 7481 { 0, 0, 0, 9 }, { 0, 0, 0, 11 }, { 0, 2, 6, 15 }, 7482 }, 7483 { /* Gore 5m 26awg Eq */ 7484 { 0x00, 0x21, 0x77 }, "QSN7600-5 ", 7485 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 9, 13 }, 7486 }, 7487 { /* Gore 7m 26awg Eq */ 7488 { 0x00, 0x21, 0x77 }, "QSN7600-7 ", 7489 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 10, 1, 8, 15 }, 7490 }, 7491 { /* Intersil 12m 24awg Active */ 7492 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224", 7493 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 3, 0, 9 }, 7494 }, 7495 { /* Intersil 10m 28awg Active */ 7496 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028", 7497 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 2, 0, 2 }, 7498 }, 7499 { /* Intersil 7m 30awg Active */ 7500 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730", 7501 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 1, 0, 3 }, 7502 }, 7503 { /* Intersil 5m 32awg Active */ 7504 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532", 7505 { 0, 0, 0, 6 }, { 0, 0, 0, 6 }, { 0, 2, 0, 8 }, 7506 }, 7507 { /* Intersil Default Active */ 7508 { 0x00, 0x30, 0xB4 }, NULL, 7509 { 0, 0, 0, 6 }, { 0, 0, 0, 5 }, { 0, 2, 0, 5 }, 7510 }, 7511 { /* Luxtera 20m Active Optical */ 7512 { 0x00, 0x25, 0x63 }, NULL, 7513 { 0, 0, 0, 5 }, { 0, 0, 0, 8 }, { 0, 2, 0, 12 }, 7514 }, 7515 { /* Molex 1M Cu loopback */ 7516 { 0x00, 0x09, 0x3A }, "74763-0025 ", 7517 { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, 7518 }, 7519 { /* Molex 2m 28awg NoEq */ 7520 { 0x00, 0x09, 0x3A }, "74757-2201 ", 7521 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 1, 15 }, 7522 }, 7523 }; 7524 7525 static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = { 7526 /* amp, pre, main, post */ 7527 { 2, 2, 15, 6 }, /* Loopback */ 7528 { 0, 0, 0, 1 }, /* 2 dB */ 7529 { 0, 0, 0, 2 }, /* 3 dB */ 7530 { 0, 0, 0, 3 }, /* 4 dB */ 7531 { 0, 0, 0, 4 }, /* 5 dB */ 7532 { 0, 0, 0, 5 }, /* 6 dB */ 7533 { 0, 0, 0, 6 }, /* 7 dB */ 7534 { 0, 0, 0, 7 }, /* 8 dB */ 7535 { 0, 0, 0, 8 }, /* 9 dB */ 7536 { 0, 0, 0, 9 }, /* 10 dB */ 7537 { 0, 0, 0, 10 }, /* 11 dB */ 7538 { 0, 0, 0, 11 }, /* 12 dB */ 7539 { 0, 0, 0, 12 }, /* 13 dB */ 7540 { 0, 0, 0, 13 }, /* 14 dB */ 7541 { 0, 0, 0, 14 }, /* 15 dB */ 7542 { 0, 0, 0, 15 }, /* 16 dB */ 7543 }; 7544 7545 static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = { 7546 /* amp, pre, main, post */ 7547 { 2, 2, 15, 6 }, /* Loopback */ 7548 { 0, 0, 0, 8 }, /* 2 dB */ 7549 { 0, 0, 0, 8 }, /* 3 dB */ 7550 { 0, 0, 0, 9 }, /* 4 dB */ 7551 { 0, 0, 0, 9 }, /* 5 dB */ 7552 { 0, 0, 0, 10 }, /* 6 dB */ 7553 { 0, 0, 0, 10 }, /* 7 dB */ 7554 { 0, 0, 0, 11 }, /* 8 dB */ 7555 { 0, 0, 0, 11 }, /* 9 dB */ 7556 { 0, 0, 0, 12 }, /* 10 dB */ 7557 { 0, 0, 0, 12 }, /* 11 dB */ 7558 { 0, 0, 0, 13 }, /* 12 dB */ 7559 { 0, 0, 0, 13 }, /* 13 dB */ 7560 { 0, 0, 0, 14 }, /* 14 dB */ 7561 { 0, 0, 0, 14 }, /* 15 dB */ 7562 { 0, 0, 0, 15 }, /* 16 dB */ 7563 }; 7564 7565 static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = { 7566 /* amp, pre, main, post */ 7567 { 2, 2, 15, 6 }, /* Loopback */ 7568 { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */ 7569 { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */ 7570 { 0, 1, 0, 11 }, /* 4 dB */ 7571 { 0, 1, 0, 13 }, /* 5 dB */ 7572 { 0, 1, 0, 15 }, /* 6 dB */ 7573 { 0, 1, 3, 15 }, /* 7 dB */ 7574 { 0, 1, 7, 15 }, /* 8 dB */ 7575 { 0, 1, 7, 15 }, /* 9 dB */ 7576 { 0, 1, 8, 15 }, /* 10 dB */ 7577 { 0, 1, 9, 15 }, /* 11 dB */ 7578 { 0, 1, 10, 15 }, /* 12 dB */ 7579 { 0, 2, 6, 15 }, /* 13 dB */ 7580 { 0, 2, 7, 15 }, /* 14 dB */ 7581 { 0, 2, 8, 15 }, /* 15 dB */ 7582 { 0, 2, 9, 15 }, /* 16 dB */ 7583 }; 7584 7585 /* 7586 * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ. 7587 * These are mostly used for mez cards going through connectors 7588 * and backplane traces, but can be used to add other "unusual" 7589 * table values as well. 7590 */ 7591 static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = { 7592 /* amp, pre, main, post */ 7593 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ 7594 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ 7595 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ 7596 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ 7597 { 0, 0, 0, 3 }, /* QMH7342 backplane settings */ 7598 { 0, 0, 0, 4 }, /* QMH7342 backplane settings */ 7599 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7600 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7601 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7602 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7603 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7604 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7605 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7606 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7607 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7608 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7609 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7610 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7611 }; 7612 7613 static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { 7614 /* amp, pre, main, post */ 7615 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ 7616 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ 7617 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ 7618 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ 7619 { 0, 0, 0, 9 }, /* QMH7342 backplane settings */ 7620 { 0, 0, 0, 10 }, /* QMH7342 backplane settings */ 7621 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7622 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7623 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7624 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7625 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7626 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7627 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7628 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7629 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7630 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7631 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7632 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7633 }; 7634 7635 static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { 7636 /* amp, pre, main, post */ 7637 { 0, 1, 0, 4 }, /* QMH7342 backplane settings */ 7638 { 0, 1, 0, 5 }, /* QMH7342 backplane settings */ 7639 { 0, 1, 0, 6 }, /* QMH7342 backplane settings */ 7640 { 0, 1, 0, 8 }, /* QMH7342 backplane settings */ 7641 { 0, 1, 0, 10 }, /* QMH7342 backplane settings */ 7642 { 0, 1, 0, 12 }, /* QMH7342 backplane settings */ 7643 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7644 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7645 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7646 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7647 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7648 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7649 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7650 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7651 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7652 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7653 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7654 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7655 }; 7656 7657 static const struct txdds_ent txdds_extra_mfg[TXDDS_MFG_SZ] = { 7658 /* amp, pre, main, post */ 7659 { 0, 0, 0, 0 }, /* QME7342 mfg settings */ 7660 { 0, 0, 0, 6 }, /* QME7342 P2 mfg settings */ 7661 }; 7662 7663 static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds, 7664 unsigned atten) 7665 { 7666 /* 7667 * The attenuation table starts at 2dB for entry 1, 7668 * with entry 0 being the loopback entry. 7669 */ 7670 if (atten <= 2) 7671 atten = 1; 7672 else if (atten > TXDDS_TABLE_SZ) 7673 atten = TXDDS_TABLE_SZ - 1; 7674 else 7675 atten--; 7676 return txdds + atten; 7677 } 7678 7679 /* 7680 * if override is set, the module parameter txselect has a value 7681 * for this specific port, so use it, rather than our normal mechanism. 7682 */ 7683 static void find_best_ent(struct qib_pportdata *ppd, 7684 const struct txdds_ent **sdr_dds, 7685 const struct txdds_ent **ddr_dds, 7686 const struct txdds_ent **qdr_dds, int override) 7687 { 7688 struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache; 7689 int idx; 7690 7691 /* Search table of known cables */ 7692 for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) { 7693 const struct vendor_txdds_ent *v = vendor_txdds + idx; 7694 7695 if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) && 7696 (!v->partnum || 7697 !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) { 7698 *sdr_dds = &v->sdr; 7699 *ddr_dds = &v->ddr; 7700 *qdr_dds = &v->qdr; 7701 return; 7702 } 7703 } 7704 7705 /* Active cables don't have attenuation so we only set SERDES 7706 * settings to account for the attenuation of the board traces. */ 7707 if (!override && QSFP_IS_ACTIVE(qd->tech)) { 7708 *sdr_dds = txdds_sdr + ppd->dd->board_atten; 7709 *ddr_dds = txdds_ddr + ppd->dd->board_atten; 7710 *qdr_dds = txdds_qdr + ppd->dd->board_atten; 7711 return; 7712 } 7713 7714 if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] || 7715 qd->atten[1])) { 7716 *sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]); 7717 *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]); 7718 *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]); 7719 return; 7720 } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) { 7721 /* 7722 * If we have no (or incomplete) data from the cable 7723 * EEPROM, or no QSFP, or override is set, use the 7724 * module parameter value to index into the attentuation 7725 * table. 7726 */ 7727 idx = ppd->cpspec->no_eep; 7728 *sdr_dds = &txdds_sdr[idx]; 7729 *ddr_dds = &txdds_ddr[idx]; 7730 *qdr_dds = &txdds_qdr[idx]; 7731 } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { 7732 /* similar to above, but index into the "extra" table. */ 7733 idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ; 7734 *sdr_dds = &txdds_extra_sdr[idx]; 7735 *ddr_dds = &txdds_extra_ddr[idx]; 7736 *qdr_dds = &txdds_extra_qdr[idx]; 7737 } else if ((IS_QME(ppd->dd) || IS_QMH(ppd->dd)) && 7738 ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + 7739 TXDDS_MFG_SZ)) { 7740 idx = ppd->cpspec->no_eep - (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ); 7741 pr_info("IB%u:%u use idx %u into txdds_mfg\n", 7742 ppd->dd->unit, ppd->port, idx); 7743 *sdr_dds = &txdds_extra_mfg[idx]; 7744 *ddr_dds = &txdds_extra_mfg[idx]; 7745 *qdr_dds = &txdds_extra_mfg[idx]; 7746 } else { 7747 /* this shouldn't happen, it's range checked */ 7748 *sdr_dds = txdds_sdr + qib_long_atten; 7749 *ddr_dds = txdds_ddr + qib_long_atten; 7750 *qdr_dds = txdds_qdr + qib_long_atten; 7751 } 7752 } 7753 7754 static void init_txdds_table(struct qib_pportdata *ppd, int override) 7755 { 7756 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; 7757 struct txdds_ent *dds; 7758 int idx; 7759 int single_ent = 0; 7760 7761 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override); 7762 7763 /* for mez cards or override, use the selected value for all entries */ 7764 if (!(ppd->dd->flags & QIB_HAS_QSFP) || override) 7765 single_ent = 1; 7766 7767 /* Fill in the first entry with the best entry found. */ 7768 set_txdds(ppd, 0, sdr_dds); 7769 set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds); 7770 set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds); 7771 if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | 7772 QIBL_LINKACTIVE)) { 7773 dds = (struct txdds_ent *)(ppd->link_speed_active == 7774 QIB_IB_QDR ? qdr_dds : 7775 (ppd->link_speed_active == 7776 QIB_IB_DDR ? ddr_dds : sdr_dds)); 7777 write_tx_serdes_param(ppd, dds); 7778 } 7779 7780 /* Fill in the remaining entries with the default table values. */ 7781 for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) { 7782 set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx); 7783 set_txdds(ppd, idx + TXDDS_TABLE_SZ, 7784 single_ent ? ddr_dds : txdds_ddr + idx); 7785 set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ, 7786 single_ent ? qdr_dds : txdds_qdr + idx); 7787 } 7788 } 7789 7790 #define KR_AHB_ACC KREG_IDX(ahb_access_ctrl) 7791 #define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg) 7792 #define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy) 7793 #define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address) 7794 #define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data) 7795 #define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read) 7796 #define AHB_TRANS_TRIES 10 7797 7798 /* 7799 * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4, 7800 * 5=subsystem which is why most calls have "chan + chan >> 1" 7801 * for the channel argument. 7802 */ 7803 static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr, 7804 u32 data, u32 mask) 7805 { 7806 u32 rd_data, wr_data, sz_mask; 7807 u64 trans, acc, prev_acc; 7808 u32 ret = 0xBAD0BAD; 7809 int tries; 7810 7811 prev_acc = qib_read_kreg64(dd, KR_AHB_ACC); 7812 /* From this point on, make sure we return access */ 7813 acc = (quad << 1) | 1; 7814 qib_write_kreg(dd, KR_AHB_ACC, acc); 7815 7816 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7817 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7818 if (trans & AHB_TRANS_RDY) 7819 break; 7820 } 7821 if (tries >= AHB_TRANS_TRIES) { 7822 qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES); 7823 goto bail; 7824 } 7825 7826 /* If mask is not all 1s, we need to read, but different SerDes 7827 * entities have different sizes 7828 */ 7829 sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1; 7830 wr_data = data & mask & sz_mask; 7831 if ((~mask & sz_mask) != 0) { 7832 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); 7833 qib_write_kreg(dd, KR_AHB_TRANS, trans); 7834 7835 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7836 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7837 if (trans & AHB_TRANS_RDY) 7838 break; 7839 } 7840 if (tries >= AHB_TRANS_TRIES) { 7841 qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n", 7842 AHB_TRANS_TRIES); 7843 goto bail; 7844 } 7845 /* Re-read in case host split reads and read data first */ 7846 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7847 rd_data = (uint32_t)(trans >> AHB_DATA_LSB); 7848 wr_data |= (rd_data & ~mask & sz_mask); 7849 } 7850 7851 /* If mask is not zero, we need to write. */ 7852 if (mask & sz_mask) { 7853 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); 7854 trans |= ((uint64_t)wr_data << AHB_DATA_LSB); 7855 trans |= AHB_WR; 7856 qib_write_kreg(dd, KR_AHB_TRANS, trans); 7857 7858 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7859 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7860 if (trans & AHB_TRANS_RDY) 7861 break; 7862 } 7863 if (tries >= AHB_TRANS_TRIES) { 7864 qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n", 7865 AHB_TRANS_TRIES); 7866 goto bail; 7867 } 7868 } 7869 ret = wr_data; 7870 bail: 7871 qib_write_kreg(dd, KR_AHB_ACC, prev_acc); 7872 return ret; 7873 } 7874 7875 static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, 7876 unsigned mask) 7877 { 7878 struct qib_devdata *dd = ppd->dd; 7879 int chan; 7880 u32 rbc; 7881 7882 for (chan = 0; chan < SERDES_CHANS; ++chan) { 7883 ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, 7884 data, mask); 7885 rbc = ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 7886 addr, 0, 0); 7887 } 7888 } 7889 7890 static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable) 7891 { 7892 u64 data = qib_read_kreg_port(ppd, krp_serdesctrl); 7893 u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN); 7894 7895 if (enable && !state) { 7896 pr_info("IB%u:%u Turning LOS on\n", 7897 ppd->dd->unit, ppd->port); 7898 data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN); 7899 } else if (!enable && state) { 7900 pr_info("IB%u:%u Turning LOS off\n", 7901 ppd->dd->unit, ppd->port); 7902 data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN); 7903 } 7904 qib_write_kreg_port(ppd, krp_serdesctrl, data); 7905 } 7906 7907 static int serdes_7322_init(struct qib_pportdata *ppd) 7908 { 7909 int ret = 0; 7910 7911 if (ppd->dd->cspec->r1) 7912 ret = serdes_7322_init_old(ppd); 7913 else 7914 ret = serdes_7322_init_new(ppd); 7915 return ret; 7916 } 7917 7918 static int serdes_7322_init_old(struct qib_pportdata *ppd) 7919 { 7920 u32 le_val; 7921 7922 /* 7923 * Initialize the Tx DDS tables. Also done every QSFP event, 7924 * for adapters with QSFP 7925 */ 7926 init_txdds_table(ppd, 0); 7927 7928 /* ensure no tx overrides from earlier driver loads */ 7929 qib_write_kreg_port(ppd, krp_tx_deemph_override, 7930 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 7931 reset_tx_deemphasis_override)); 7932 7933 /* Patch some SerDes defaults to "Better for IB" */ 7934 /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */ 7935 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); 7936 7937 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ 7938 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); 7939 /* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */ 7940 ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6)); 7941 7942 /* May be overridden in qsfp_7322_event */ 7943 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; 7944 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); 7945 7946 /* enable LE1 adaptation for all but QME, which is disabled */ 7947 le_val = IS_QME(ppd->dd) ? 0 : 1; 7948 ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5)); 7949 7950 /* Clear cmode-override, may be set from older driver */ 7951 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); 7952 7953 /* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */ 7954 ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8)); 7955 7956 /* setup LoS params; these are subsystem, so chan == 5 */ 7957 /* LoS filter threshold_count on, ch 0-3, set to 8 */ 7958 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); 7959 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); 7960 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); 7961 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); 7962 7963 /* LoS filter threshold_count off, ch 0-3, set to 4 */ 7964 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); 7965 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); 7966 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); 7967 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); 7968 7969 /* LoS filter select enabled */ 7970 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); 7971 7972 /* LoS target data: SDR=4, DDR=2, QDR=1 */ 7973 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ 7974 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ 7975 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ 7976 7977 serdes_7322_los_enable(ppd, 1); 7978 7979 /* rxbistena; set 0 to avoid effects of it switch later */ 7980 ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15); 7981 7982 /* Configure 4 DFE taps, and only they adapt */ 7983 ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0)); 7984 7985 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ 7986 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; 7987 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); 7988 7989 /* 7990 * Set receive adaptation mode. SDR and DDR adaptation are 7991 * always on, and QDR is initially enabled; later disabled. 7992 */ 7993 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); 7994 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); 7995 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 7996 ppd->dd->cspec->r1 ? 7997 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); 7998 ppd->cpspec->qdr_dfe_on = 1; 7999 8000 /* FLoop LOS gate: PPM filter enabled */ 8001 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); 8002 8003 /* rx offset center enabled */ 8004 ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4); 8005 8006 if (!ppd->dd->cspec->r1) { 8007 ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12); 8008 ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8); 8009 } 8010 8011 /* Set the frequency loop bandwidth to 15 */ 8012 ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5)); 8013 8014 return 0; 8015 } 8016 8017 static int serdes_7322_init_new(struct qib_pportdata *ppd) 8018 { 8019 unsigned long tend; 8020 u32 le_val, rxcaldone; 8021 int chan, chan_done = (1 << SERDES_CHANS) - 1; 8022 8023 /* Clear cmode-override, may be set from older driver */ 8024 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); 8025 8026 /* ensure no tx overrides from earlier driver loads */ 8027 qib_write_kreg_port(ppd, krp_tx_deemph_override, 8028 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8029 reset_tx_deemphasis_override)); 8030 8031 /* START OF LSI SUGGESTED SERDES BRINGUP */ 8032 /* Reset - Calibration Setup */ 8033 /* Stop DFE adaptaion */ 8034 ibsd_wr_allchans(ppd, 1, 0, BMASK(9, 1)); 8035 /* Disable LE1 */ 8036 ibsd_wr_allchans(ppd, 13, 0, BMASK(5, 5)); 8037 /* Disable autoadapt for LE1 */ 8038 ibsd_wr_allchans(ppd, 1, 0, BMASK(15, 15)); 8039 /* Disable LE2 */ 8040 ibsd_wr_allchans(ppd, 13, 0, BMASK(6, 6)); 8041 /* Disable VGA */ 8042 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); 8043 /* Disable AFE Offset Cancel */ 8044 ibsd_wr_allchans(ppd, 12, 0, BMASK(12, 12)); 8045 /* Disable Timing Loop */ 8046 ibsd_wr_allchans(ppd, 2, 0, BMASK(3, 3)); 8047 /* Disable Frequency Loop */ 8048 ibsd_wr_allchans(ppd, 2, 0, BMASK(4, 4)); 8049 /* Disable Baseline Wander Correction */ 8050 ibsd_wr_allchans(ppd, 13, 0, BMASK(13, 13)); 8051 /* Disable RX Calibration */ 8052 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); 8053 /* Disable RX Offset Calibration */ 8054 ibsd_wr_allchans(ppd, 12, 0, BMASK(4, 4)); 8055 /* Select BB CDR */ 8056 ibsd_wr_allchans(ppd, 2, (1 << 15), BMASK(15, 15)); 8057 /* CDR Step Size */ 8058 ibsd_wr_allchans(ppd, 5, 0, BMASK(9, 8)); 8059 /* Enable phase Calibration */ 8060 ibsd_wr_allchans(ppd, 12, (1 << 5), BMASK(5, 5)); 8061 /* DFE Bandwidth [2:14-12] */ 8062 ibsd_wr_allchans(ppd, 2, (4 << 12), BMASK(14, 12)); 8063 /* DFE Config (4 taps only) */ 8064 ibsd_wr_allchans(ppd, 16, 0, BMASK(1, 0)); 8065 /* Gain Loop Bandwidth */ 8066 if (!ppd->dd->cspec->r1) { 8067 ibsd_wr_allchans(ppd, 12, 1 << 12, BMASK(12, 12)); 8068 ibsd_wr_allchans(ppd, 12, 2 << 8, BMASK(11, 8)); 8069 } else { 8070 ibsd_wr_allchans(ppd, 19, (3 << 11), BMASK(13, 11)); 8071 } 8072 /* Baseline Wander Correction Gain [13:4-0] (leave as default) */ 8073 /* Baseline Wander Correction Gain [3:7-5] (leave as default) */ 8074 /* Data Rate Select [5:7-6] (leave as default) */ 8075 /* RX Parallel Word Width [3:10-8] (leave as default) */ 8076 8077 /* RX REST */ 8078 /* Single- or Multi-channel reset */ 8079 /* RX Analog reset */ 8080 /* RX Digital reset */ 8081 ibsd_wr_allchans(ppd, 0, 0, BMASK(15, 13)); 8082 msleep(20); 8083 /* RX Analog reset */ 8084 ibsd_wr_allchans(ppd, 0, (1 << 14), BMASK(14, 14)); 8085 msleep(20); 8086 /* RX Digital reset */ 8087 ibsd_wr_allchans(ppd, 0, (1 << 13), BMASK(13, 13)); 8088 msleep(20); 8089 8090 /* setup LoS params; these are subsystem, so chan == 5 */ 8091 /* LoS filter threshold_count on, ch 0-3, set to 8 */ 8092 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); 8093 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); 8094 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); 8095 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); 8096 8097 /* LoS filter threshold_count off, ch 0-3, set to 4 */ 8098 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); 8099 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); 8100 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); 8101 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); 8102 8103 /* LoS filter select enabled */ 8104 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); 8105 8106 /* LoS target data: SDR=4, DDR=2, QDR=1 */ 8107 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ 8108 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ 8109 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ 8110 8111 /* Turn on LOS on initial SERDES init */ 8112 serdes_7322_los_enable(ppd, 1); 8113 /* FLoop LOS gate: PPM filter enabled */ 8114 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); 8115 8116 /* RX LATCH CALIBRATION */ 8117 /* Enable Eyefinder Phase Calibration latch */ 8118 ibsd_wr_allchans(ppd, 15, 1, BMASK(0, 0)); 8119 /* Enable RX Offset Calibration latch */ 8120 ibsd_wr_allchans(ppd, 12, (1 << 4), BMASK(4, 4)); 8121 msleep(20); 8122 /* Start Calibration */ 8123 ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10)); 8124 tend = jiffies + msecs_to_jiffies(500); 8125 while (chan_done && !time_is_before_jiffies(tend)) { 8126 msleep(20); 8127 for (chan = 0; chan < SERDES_CHANS; ++chan) { 8128 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 8129 (chan + (chan >> 1)), 8130 25, 0, 0); 8131 if ((~rxcaldone & (u32)BMASK(9, 9)) == 0 && 8132 (~chan_done & (1 << chan)) == 0) 8133 chan_done &= ~(1 << chan); 8134 } 8135 } 8136 if (chan_done) { 8137 pr_info("Serdes %d calibration not done after .5 sec: 0x%x\n", 8138 IBSD(ppd->hw_pidx), chan_done); 8139 } else { 8140 for (chan = 0; chan < SERDES_CHANS; ++chan) { 8141 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 8142 (chan + (chan >> 1)), 8143 25, 0, 0); 8144 if ((~rxcaldone & (u32)BMASK(10, 10)) == 0) 8145 pr_info("Serdes %d chan %d calibration failed\n", 8146 IBSD(ppd->hw_pidx), chan); 8147 } 8148 } 8149 8150 /* Turn off Calibration */ 8151 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); 8152 msleep(20); 8153 8154 /* BRING RX UP */ 8155 /* Set LE2 value (May be overridden in qsfp_7322_event) */ 8156 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; 8157 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); 8158 /* Set LE2 Loop bandwidth */ 8159 ibsd_wr_allchans(ppd, 3, (7 << 5), BMASK(7, 5)); 8160 /* Enable LE2 */ 8161 ibsd_wr_allchans(ppd, 13, (1 << 6), BMASK(6, 6)); 8162 msleep(20); 8163 /* Enable H0 only */ 8164 ibsd_wr_allchans(ppd, 1, 1, BMASK(9, 1)); 8165 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ 8166 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; 8167 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); 8168 /* Enable VGA */ 8169 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); 8170 msleep(20); 8171 /* Set Frequency Loop Bandwidth */ 8172 ibsd_wr_allchans(ppd, 2, (15 << 5), BMASK(8, 5)); 8173 /* Enable Frequency Loop */ 8174 ibsd_wr_allchans(ppd, 2, (1 << 4), BMASK(4, 4)); 8175 /* Set Timing Loop Bandwidth */ 8176 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); 8177 /* Enable Timing Loop */ 8178 ibsd_wr_allchans(ppd, 2, (1 << 3), BMASK(3, 3)); 8179 msleep(50); 8180 /* Enable DFE 8181 * Set receive adaptation mode. SDR and DDR adaptation are 8182 * always on, and QDR is initially enabled; later disabled. 8183 */ 8184 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); 8185 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); 8186 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 8187 ppd->dd->cspec->r1 ? 8188 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); 8189 ppd->cpspec->qdr_dfe_on = 1; 8190 /* Disable LE1 */ 8191 ibsd_wr_allchans(ppd, 13, (0 << 5), (1 << 5)); 8192 /* Disable auto adapt for LE1 */ 8193 ibsd_wr_allchans(ppd, 1, (0 << 15), BMASK(15, 15)); 8194 msleep(20); 8195 /* Enable AFE Offset Cancel */ 8196 ibsd_wr_allchans(ppd, 12, (1 << 12), BMASK(12, 12)); 8197 /* Enable Baseline Wander Correction */ 8198 ibsd_wr_allchans(ppd, 12, (1 << 13), BMASK(13, 13)); 8199 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ 8200 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); 8201 /* VGA output common mode */ 8202 ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2)); 8203 8204 /* 8205 * Initialize the Tx DDS tables. Also done every QSFP event, 8206 * for adapters with QSFP 8207 */ 8208 init_txdds_table(ppd, 0); 8209 8210 return 0; 8211 } 8212 8213 /* start adjust QMH serdes parameters */ 8214 8215 static void set_man_code(struct qib_pportdata *ppd, int chan, int code) 8216 { 8217 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8218 9, code << 9, 0x3f << 9); 8219 } 8220 8221 static void set_man_mode_h1(struct qib_pportdata *ppd, int chan, 8222 int enable, u32 tapenable) 8223 { 8224 if (enable) 8225 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8226 1, 3 << 10, 0x1f << 10); 8227 else 8228 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8229 1, 0, 0x1f << 10); 8230 } 8231 8232 /* Set clock to 1, 0, 1, 0 */ 8233 static void clock_man(struct qib_pportdata *ppd, int chan) 8234 { 8235 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8236 4, 0x4000, 0x4000); 8237 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8238 4, 0, 0x4000); 8239 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8240 4, 0x4000, 0x4000); 8241 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8242 4, 0, 0x4000); 8243 } 8244 8245 /* 8246 * write the current Tx serdes pre,post,main,amp settings into the serdes. 8247 * The caller must pass the settings appropriate for the current speed, 8248 * or not care if they are correct for the current speed. 8249 */ 8250 static void write_tx_serdes_param(struct qib_pportdata *ppd, 8251 struct txdds_ent *txdds) 8252 { 8253 u64 deemph; 8254 8255 deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override); 8256 /* field names for amp, main, post, pre, respectively */ 8257 deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) | 8258 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) | 8259 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) | 8260 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena)); 8261 8262 deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8263 tx_override_deemphasis_select); 8264 deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8265 txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8266 txampcntl_d2a); 8267 deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8268 txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8269 txc0_ena); 8270 deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8271 txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8272 txcp1_ena); 8273 deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8274 txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8275 txcn1_ena); 8276 qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph); 8277 } 8278 8279 /* 8280 * Set the parameters for mez cards on link bounce, so they are 8281 * always exactly what was requested. Similar logic to init_txdds 8282 * but does just the serdes. 8283 */ 8284 static void adj_tx_serdes(struct qib_pportdata *ppd) 8285 { 8286 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; 8287 struct txdds_ent *dds; 8288 8289 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1); 8290 dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? 8291 qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ? 8292 ddr_dds : sdr_dds)); 8293 write_tx_serdes_param(ppd, dds); 8294 } 8295 8296 /* set QDR forced value for H1, if needed */ 8297 static void force_h1(struct qib_pportdata *ppd) 8298 { 8299 int chan; 8300 8301 ppd->cpspec->qdr_reforce = 0; 8302 if (!ppd->dd->cspec->r1) 8303 return; 8304 8305 for (chan = 0; chan < SERDES_CHANS; chan++) { 8306 set_man_mode_h1(ppd, chan, 1, 0); 8307 set_man_code(ppd, chan, ppd->cpspec->h1_val); 8308 clock_man(ppd, chan); 8309 set_man_mode_h1(ppd, chan, 0, 0); 8310 } 8311 } 8312 8313 #define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN) 8314 #define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en) 8315 8316 #define R_OPCODE_LSB 3 8317 #define R_OP_NOP 0 8318 #define R_OP_SHIFT 2 8319 #define R_OP_UPDATE 3 8320 #define R_TDI_LSB 2 8321 #define R_TDO_LSB 1 8322 #define R_RDY 1 8323 8324 static int qib_r_grab(struct qib_devdata *dd) 8325 { 8326 u64 val = SJA_EN; 8327 8328 qib_write_kreg(dd, kr_r_access, val); 8329 qib_read_kreg32(dd, kr_scratch); 8330 return 0; 8331 } 8332 8333 /* qib_r_wait_for_rdy() not only waits for the ready bit, it 8334 * returns the current state of R_TDO 8335 */ 8336 static int qib_r_wait_for_rdy(struct qib_devdata *dd) 8337 { 8338 u64 val; 8339 int timeout; 8340 8341 for (timeout = 0; timeout < 100 ; ++timeout) { 8342 val = qib_read_kreg32(dd, kr_r_access); 8343 if (val & R_RDY) 8344 return (val >> R_TDO_LSB) & 1; 8345 } 8346 return -1; 8347 } 8348 8349 static int qib_r_shift(struct qib_devdata *dd, int bisten, 8350 int len, u8 *inp, u8 *outp) 8351 { 8352 u64 valbase, val; 8353 int ret, pos; 8354 8355 valbase = SJA_EN | (bisten << BISTEN_LSB) | 8356 (R_OP_SHIFT << R_OPCODE_LSB); 8357 ret = qib_r_wait_for_rdy(dd); 8358 if (ret < 0) 8359 goto bail; 8360 for (pos = 0; pos < len; ++pos) { 8361 val = valbase; 8362 if (outp) { 8363 outp[pos >> 3] &= ~(1 << (pos & 7)); 8364 outp[pos >> 3] |= (ret << (pos & 7)); 8365 } 8366 if (inp) { 8367 int tdi = inp[pos >> 3] >> (pos & 7); 8368 8369 val |= ((tdi & 1) << R_TDI_LSB); 8370 } 8371 qib_write_kreg(dd, kr_r_access, val); 8372 qib_read_kreg32(dd, kr_scratch); 8373 ret = qib_r_wait_for_rdy(dd); 8374 if (ret < 0) 8375 break; 8376 } 8377 /* Restore to NOP between operations. */ 8378 val = SJA_EN | (bisten << BISTEN_LSB); 8379 qib_write_kreg(dd, kr_r_access, val); 8380 qib_read_kreg32(dd, kr_scratch); 8381 ret = qib_r_wait_for_rdy(dd); 8382 8383 if (ret >= 0) 8384 ret = pos; 8385 bail: 8386 return ret; 8387 } 8388 8389 static int qib_r_update(struct qib_devdata *dd, int bisten) 8390 { 8391 u64 val; 8392 int ret; 8393 8394 val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB); 8395 ret = qib_r_wait_for_rdy(dd); 8396 if (ret >= 0) { 8397 qib_write_kreg(dd, kr_r_access, val); 8398 qib_read_kreg32(dd, kr_scratch); 8399 } 8400 return ret; 8401 } 8402 8403 #define BISTEN_PORT_SEL 15 8404 #define LEN_PORT_SEL 625 8405 #define BISTEN_AT 17 8406 #define LEN_AT 156 8407 #define BISTEN_ETM 16 8408 #define LEN_ETM 632 8409 8410 #define BIT2BYTE(x) (((x) + BITS_PER_BYTE - 1) / BITS_PER_BYTE) 8411 8412 /* these are common for all IB port use cases. */ 8413 static u8 reset_at[BIT2BYTE(LEN_AT)] = { 8414 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8415 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 8416 }; 8417 static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = { 8418 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8419 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8420 0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e, 8421 0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7, 8422 0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70, 8423 0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00, 8424 0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8425 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 8426 }; 8427 static u8 at[BIT2BYTE(LEN_AT)] = { 8428 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 8429 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 8430 }; 8431 8432 /* used for IB1 or IB2, only one in use */ 8433 static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = { 8434 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8435 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8436 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8437 0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00, 8438 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8439 0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03, 8440 0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00, 8441 0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00, 8442 }; 8443 8444 /* used when both IB1 and IB2 are in use */ 8445 static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = { 8446 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8447 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79, 8448 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8449 0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05, 8450 0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 8451 0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07, 8452 0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00, 8453 0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, 8454 }; 8455 8456 /* used when only IB1 is in use */ 8457 static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = { 8458 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 8459 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 8460 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8461 0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8462 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 8463 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8464 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8465 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 8466 }; 8467 8468 /* used when only IB2 is in use */ 8469 static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = { 8470 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39, 8471 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32, 8472 0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 8473 0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 8474 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32, 8475 0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 8476 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 8477 0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 8478 }; 8479 8480 /* used when both IB1 and IB2 are in use */ 8481 static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = { 8482 0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 8483 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 8484 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8485 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8486 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 8487 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a, 8488 0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8489 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 8490 }; 8491 8492 /* 8493 * Do setup to properly handle IB link recovery; if port is zero, we 8494 * are initializing to cover both ports; otherwise we are initializing 8495 * to cover a single port card, or the port has reached INIT and we may 8496 * need to switch coverage types. 8497 */ 8498 static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both) 8499 { 8500 u8 *portsel, *etm; 8501 struct qib_devdata *dd = ppd->dd; 8502 8503 if (!ppd->dd->cspec->r1) 8504 return; 8505 if (!both) { 8506 dd->cspec->recovery_ports_initted++; 8507 ppd->cpspec->recovery_init = 1; 8508 } 8509 if (!both && dd->cspec->recovery_ports_initted == 1) { 8510 portsel = ppd->port == 1 ? portsel_port1 : portsel_port2; 8511 etm = atetm_1port; 8512 } else { 8513 portsel = portsel_2port; 8514 etm = atetm_2port; 8515 } 8516 8517 if (qib_r_grab(dd) < 0 || 8518 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 || 8519 qib_r_update(dd, BISTEN_ETM) < 0 || 8520 qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 || 8521 qib_r_update(dd, BISTEN_AT) < 0 || 8522 qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL, 8523 portsel, NULL) < 0 || 8524 qib_r_update(dd, BISTEN_PORT_SEL) < 0 || 8525 qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 || 8526 qib_r_update(dd, BISTEN_AT) < 0 || 8527 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 || 8528 qib_r_update(dd, BISTEN_ETM) < 0) 8529 qib_dev_err(dd, "Failed IB link recovery setup\n"); 8530 } 8531 8532 static void check_7322_rxe_status(struct qib_pportdata *ppd) 8533 { 8534 struct qib_devdata *dd = ppd->dd; 8535 u64 fmask; 8536 8537 if (dd->cspec->recovery_ports_initted != 1) 8538 return; /* rest doesn't apply to dualport */ 8539 qib_write_kreg(dd, kr_control, dd->control | 8540 SYM_MASK(Control, FreezeMode)); 8541 (void)qib_read_kreg64(dd, kr_scratch); 8542 udelay(3); /* ibcreset asserted 400ns, be sure that's over */ 8543 fmask = qib_read_kreg64(dd, kr_act_fmask); 8544 if (!fmask) { 8545 /* 8546 * require a powercycle before we'll work again, and make 8547 * sure we get no more interrupts, and don't turn off 8548 * freeze. 8549 */ 8550 ppd->dd->cspec->stay_in_freeze = 1; 8551 qib_7322_set_intr_state(ppd->dd, 0); 8552 qib_write_kreg(dd, kr_fmask, 0ULL); 8553 qib_dev_err(dd, "HCA unusable until powercycled\n"); 8554 return; /* eventually reset */ 8555 } 8556 8557 qib_write_kreg(ppd->dd, kr_hwerrclear, 8558 SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1)); 8559 8560 /* don't do the full clear_freeze(), not needed for this */ 8561 qib_write_kreg(dd, kr_control, dd->control); 8562 qib_read_kreg32(dd, kr_scratch); 8563 /* take IBC out of reset */ 8564 if (ppd->link_speed_supported) { 8565 ppd->cpspec->ibcctrl_a &= 8566 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 8567 qib_write_kreg_port(ppd, krp_ibcctrl_a, 8568 ppd->cpspec->ibcctrl_a); 8569 qib_read_kreg32(dd, kr_scratch); 8570 if (ppd->lflags & QIBL_IB_LINK_DISABLED) 8571 qib_set_ib_7322_lstate(ppd, 0, 8572 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 8573 } 8574 } 8575