xref: /linux/drivers/iio/temperature/max31865.c (revision ed5c2f5fd10dda07263f79f338a512c0f49f76f5)
1 // SPDX-License-Identifier: GPL-2.0-only
2 
3 /*
4  * Copyright (c) Linumiz 2021
5  *
6  * max31865.c - Maxim MAX31865 RTD-to-Digital Converter sensor driver
7  *
8  * Author: Navin Sankar Velliangiri <navin@linumiz.com>
9  */
10 
11 #include <linux/ctype.h>
12 #include <linux/delay.h>
13 #include <linux/err.h>
14 #include <linux/init.h>
15 #include <linux/mod_devicetable.h>
16 #include <linux/module.h>
17 #include <linux/iio/iio.h>
18 #include <linux/iio/sysfs.h>
19 #include <linux/property.h>
20 #include <linux/spi/spi.h>
21 #include <asm/unaligned.h>
22 
23 /*
24  * The MSB of the register value determines whether the following byte will
25  * be written or read. If it is 0, read will follow and if it is 1, write
26  * will follow.
27  */
28 #define MAX31865_RD_WR_BIT			BIT(7)
29 
30 #define MAX31865_CFG_VBIAS			BIT(7)
31 #define MAX31865_CFG_1SHOT			BIT(5)
32 #define MAX31865_3WIRE_RTD			BIT(4)
33 #define MAX31865_FAULT_STATUS_CLEAR		BIT(1)
34 #define MAX31865_FILTER_50HZ			BIT(0)
35 
36 /* The MAX31865 registers */
37 #define MAX31865_CFG_REG			0x00
38 #define MAX31865_RTD_MSB			0x01
39 #define MAX31865_FAULT_STATUS			0x07
40 
41 #define MAX31865_FAULT_OVUV			BIT(2)
42 
43 static const char max31865_show_samp_freq[] = "50 60";
44 
45 static const struct iio_chan_spec max31865_channels[] = {
46 	{	/* RTD Temperature */
47 		.type = IIO_TEMP,
48 		.info_mask_separate =
49 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)
50 	},
51 };
52 
53 struct max31865_data {
54 	struct spi_device *spi;
55 	struct mutex lock;
56 	bool filter_50hz;
57 	bool three_wire;
58 	u8 buf[2] __aligned(IIO_DMA_MINALIGN);
59 };
60 
61 static int max31865_read(struct max31865_data *data, u8 reg,
62 			 unsigned int read_size)
63 {
64 	return spi_write_then_read(data->spi, &reg, 1, data->buf, read_size);
65 }
66 
67 static int max31865_write(struct max31865_data *data, size_t len)
68 {
69 	return spi_write(data->spi, data->buf, len);
70 }
71 
72 static int enable_bias(struct max31865_data *data)
73 {
74 	u8 cfg;
75 	int ret;
76 
77 	ret = max31865_read(data, MAX31865_CFG_REG, 1);
78 	if (ret)
79 		return ret;
80 
81 	cfg = data->buf[0];
82 
83 	data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT;
84 	data->buf[1] = cfg | MAX31865_CFG_VBIAS;
85 
86 	return max31865_write(data, 2);
87 }
88 
89 static int disable_bias(struct max31865_data *data)
90 {
91 	u8 cfg;
92 	int ret;
93 
94 	ret = max31865_read(data, MAX31865_CFG_REG, 1);
95 	if (ret)
96 		return ret;
97 
98 	cfg = data->buf[0];
99 	cfg &= ~MAX31865_CFG_VBIAS;
100 
101 	data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT;
102 	data->buf[1] = cfg;
103 
104 	return max31865_write(data, 2);
105 }
106 
107 static int max31865_rtd_read(struct max31865_data *data, int *val)
108 {
109 	u8 reg;
110 	int ret;
111 
112 	/* Enable BIAS to start the conversion */
113 	ret = enable_bias(data);
114 	if (ret)
115 		return ret;
116 
117 	/* wait 10.5ms before initiating the conversion */
118 	msleep(11);
119 
120 	ret = max31865_read(data, MAX31865_CFG_REG, 1);
121 	if (ret)
122 		return ret;
123 
124 	reg = data->buf[0];
125 	reg |= MAX31865_CFG_1SHOT | MAX31865_FAULT_STATUS_CLEAR;
126 	data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT;
127 	data->buf[1] = reg;
128 
129 	ret = max31865_write(data, 2);
130 	if (ret)
131 		return ret;
132 
133 	if (data->filter_50hz) {
134 		/* 50Hz filter mode requires 62.5ms to complete */
135 		msleep(63);
136 	} else {
137 		/* 60Hz filter mode requires 52ms to complete */
138 		msleep(52);
139 	}
140 
141 	ret = max31865_read(data, MAX31865_RTD_MSB, 2);
142 	if (ret)
143 		return ret;
144 
145 	*val = get_unaligned_be16(&data->buf) >> 1;
146 
147 	return disable_bias(data);
148 }
149 
150 static int max31865_read_raw(struct iio_dev *indio_dev,
151 			     struct iio_chan_spec const *chan,
152 			     int *val, int *val2, long mask)
153 {
154 	struct max31865_data *data = iio_priv(indio_dev);
155 	int ret;
156 
157 	switch (mask) {
158 	case IIO_CHAN_INFO_RAW:
159 		mutex_lock(&data->lock);
160 		ret = max31865_rtd_read(data, val);
161 		mutex_unlock(&data->lock);
162 		if (ret)
163 			return ret;
164 		return IIO_VAL_INT;
165 	case IIO_CHAN_INFO_SCALE:
166 		/* Temp. Data resolution is 0.03125 degree centigrade */
167 		*val = 31;
168 		*val2 = 250000; /* 1000 * 0.03125 */
169 		return IIO_VAL_INT_PLUS_MICRO;
170 	default:
171 		return -EINVAL;
172 	}
173 }
174 
175 static int max31865_init(struct max31865_data *data)
176 {
177 	u8 cfg;
178 	int ret;
179 
180 	ret = max31865_read(data, MAX31865_CFG_REG, 1);
181 	if (ret)
182 		return ret;
183 
184 	cfg = data->buf[0];
185 
186 	if (data->three_wire)
187 		/* 3-wire RTD connection */
188 		cfg |= MAX31865_3WIRE_RTD;
189 
190 	if (data->filter_50hz)
191 		/* 50Hz noise rejection filter */
192 		cfg |= MAX31865_FILTER_50HZ;
193 
194 	data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT;
195 	data->buf[1] = cfg;
196 
197 	return max31865_write(data, 2);
198 }
199 
200 static ssize_t show_fault(struct device *dev, u8 faultbit, char *buf)
201 {
202 	int ret;
203 	bool fault;
204 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
205 	struct max31865_data *data = iio_priv(indio_dev);
206 
207 	ret = max31865_read(data, MAX31865_FAULT_STATUS, 1);
208 	if (ret)
209 		return ret;
210 
211 	fault = data->buf[0] & faultbit;
212 
213 	return sysfs_emit(buf, "%d\n", fault);
214 }
215 
216 static ssize_t show_fault_ovuv(struct device *dev,
217 			      struct device_attribute *attr,
218 			      char *buf)
219 {
220 	return show_fault(dev, MAX31865_FAULT_OVUV, buf);
221 }
222 
223 static ssize_t show_filter(struct device *dev,
224 			   struct device_attribute *attr,
225 			   char *buf)
226 {
227 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
228 	struct max31865_data *data = iio_priv(indio_dev);
229 
230 	return sysfs_emit(buf, "%d\n", data->filter_50hz ? 50 : 60);
231 }
232 
233 static ssize_t set_filter(struct device *dev,
234 			  struct device_attribute *attr,
235 			  const char *buf,
236 			  size_t len)
237 {
238 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
239 	struct max31865_data *data = iio_priv(indio_dev);
240 	unsigned int freq;
241 	int ret;
242 
243 	ret = kstrtouint(buf, 10, &freq);
244 	if (ret)
245 		return ret;
246 
247 	switch (freq) {
248 	case 50:
249 		data->filter_50hz = true;
250 		break;
251 	case 60:
252 		data->filter_50hz = false;
253 		break;
254 	default:
255 		return -EINVAL;
256 	}
257 
258 	mutex_lock(&data->lock);
259 	ret = max31865_init(data);
260 	mutex_unlock(&data->lock);
261 	if (ret)
262 		return ret;
263 
264 	return len;
265 }
266 
267 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(max31865_show_samp_freq);
268 static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0);
269 static IIO_DEVICE_ATTR(in_filter_notch_center_frequency, 0644,
270 		    show_filter, set_filter, 0);
271 
272 static struct attribute *max31865_attributes[] = {
273 	&iio_dev_attr_fault_ovuv.dev_attr.attr,
274 	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
275 	&iio_dev_attr_in_filter_notch_center_frequency.dev_attr.attr,
276 	NULL,
277 };
278 
279 static const struct attribute_group max31865_group = {
280 	.attrs = max31865_attributes,
281 };
282 
283 static const struct iio_info max31865_info = {
284 	.read_raw = max31865_read_raw,
285 	.attrs = &max31865_group,
286 };
287 
288 static int max31865_probe(struct spi_device *spi)
289 {
290 	const struct spi_device_id *id = spi_get_device_id(spi);
291 	struct iio_dev *indio_dev;
292 	struct max31865_data *data;
293 	int ret;
294 
295 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data));
296 	if (!indio_dev)
297 		return -ENOMEM;
298 
299 	data = iio_priv(indio_dev);
300 	data->spi = spi;
301 	data->filter_50hz = false;
302 	mutex_init(&data->lock);
303 
304 	indio_dev->info = &max31865_info;
305 	indio_dev->name = id->name;
306 	indio_dev->modes = INDIO_DIRECT_MODE;
307 	indio_dev->channels = max31865_channels;
308 	indio_dev->num_channels = ARRAY_SIZE(max31865_channels);
309 
310 	if (device_property_read_bool(&spi->dev, "maxim,3-wire")) {
311 		/* select 3 wire */
312 		data->three_wire = 1;
313 	} else {
314 		/* select 2 or 4 wire */
315 		data->three_wire = 0;
316 	}
317 
318 	ret = max31865_init(data);
319 	if (ret) {
320 		dev_err(&spi->dev, "error: Failed to configure max31865\n");
321 		return ret;
322 	}
323 
324 	return devm_iio_device_register(&spi->dev, indio_dev);
325 }
326 
327 static const struct spi_device_id max31865_id[] = {
328 	{ "max31865", 0 },
329 	{ }
330 };
331 MODULE_DEVICE_TABLE(spi, max31865_id);
332 
333 static const struct of_device_id max31865_of_match[] = {
334 	{ .compatible = "maxim,max31865" },
335 	{ }
336 };
337 MODULE_DEVICE_TABLE(of, max31865_of_match);
338 
339 static struct spi_driver max31865_driver = {
340 	.driver = {
341 		.name	= "max31865",
342 		.of_match_table = max31865_of_match,
343 	},
344 	.probe = max31865_probe,
345 	.id_table = max31865_id,
346 };
347 module_spi_driver(max31865_driver);
348 
349 MODULE_AUTHOR("Navin Sankar Velliangiri <navin@linumiz.com>");
350 MODULE_DESCRIPTION("Maxim MAX31865 RTD-to-Digital Converter sensor driver");
351 MODULE_LICENSE("GPL v2");
352