xref: /linux/drivers/iio/proximity/srf04.c (revision ebf68996de0ab250c5d520eb2291ab65643e9a1e)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * SRF04: ultrasonic sensor for distance measuring by using GPIOs
4  *
5  * Copyright (c) 2017 Andreas Klinger <ak@it-klinger.de>
6  *
7  * For details about the device see:
8  * http://www.robot-electronics.co.uk/htm/srf04tech.htm
9  *
10  * the measurement cycle as timing diagram looks like:
11  *
12  *          +---+
13  * GPIO     |   |
14  * trig:  --+   +------------------------------------------------------
15  *          ^   ^
16  *          |<->|
17  *         udelay(trigger_pulse_us)
18  *
19  * ultra           +-+ +-+ +-+
20  * sonic           | | | | | |
21  * burst: ---------+ +-+ +-+ +-----------------------------------------
22  *                           .
23  * ultra                     .              +-+ +-+ +-+
24  * sonic                     .              | | | | | |
25  * echo:  ----------------------------------+ +-+ +-+ +----------------
26  *                           .                        .
27  *                           +------------------------+
28  * GPIO                      |                        |
29  * echo:  -------------------+                        +---------------
30  *                           ^                        ^
31  *                           interrupt                interrupt
32  *                           (ts_rising)              (ts_falling)
33  *                           |<---------------------->|
34  *                              pulse time measured
35  *                              --> one round trip of ultra sonic waves
36  */
37 #include <linux/err.h>
38 #include <linux/gpio/consumer.h>
39 #include <linux/kernel.h>
40 #include <linux/module.h>
41 #include <linux/of.h>
42 #include <linux/of_device.h>
43 #include <linux/platform_device.h>
44 #include <linux/property.h>
45 #include <linux/sched.h>
46 #include <linux/interrupt.h>
47 #include <linux/delay.h>
48 #include <linux/iio/iio.h>
49 #include <linux/iio/sysfs.h>
50 
51 struct srf04_cfg {
52 	unsigned long trigger_pulse_us;
53 };
54 
55 struct srf04_data {
56 	struct device		*dev;
57 	struct gpio_desc	*gpiod_trig;
58 	struct gpio_desc	*gpiod_echo;
59 	struct mutex		lock;
60 	int			irqnr;
61 	ktime_t			ts_rising;
62 	ktime_t			ts_falling;
63 	struct completion	rising;
64 	struct completion	falling;
65 	const struct srf04_cfg	*cfg;
66 };
67 
68 static const struct srf04_cfg srf04_cfg = {
69 	.trigger_pulse_us = 10,
70 };
71 
72 static const struct srf04_cfg mb_lv_cfg = {
73 	.trigger_pulse_us = 20,
74 };
75 
76 static irqreturn_t srf04_handle_irq(int irq, void *dev_id)
77 {
78 	struct iio_dev *indio_dev = dev_id;
79 	struct srf04_data *data = iio_priv(indio_dev);
80 	ktime_t now = ktime_get();
81 
82 	if (gpiod_get_value(data->gpiod_echo)) {
83 		data->ts_rising = now;
84 		complete(&data->rising);
85 	} else {
86 		data->ts_falling = now;
87 		complete(&data->falling);
88 	}
89 
90 	return IRQ_HANDLED;
91 }
92 
93 static int srf04_read(struct srf04_data *data)
94 {
95 	int ret;
96 	ktime_t ktime_dt;
97 	u64 dt_ns;
98 	u32 time_ns, distance_mm;
99 
100 	/*
101 	 * just one read-echo-cycle can take place at a time
102 	 * ==> lock against concurrent reading calls
103 	 */
104 	mutex_lock(&data->lock);
105 
106 	reinit_completion(&data->rising);
107 	reinit_completion(&data->falling);
108 
109 	gpiod_set_value(data->gpiod_trig, 1);
110 	udelay(data->cfg->trigger_pulse_us);
111 	gpiod_set_value(data->gpiod_trig, 0);
112 
113 	/* it cannot take more than 20 ms */
114 	ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
115 	if (ret < 0) {
116 		mutex_unlock(&data->lock);
117 		return ret;
118 	} else if (ret == 0) {
119 		mutex_unlock(&data->lock);
120 		return -ETIMEDOUT;
121 	}
122 
123 	ret = wait_for_completion_killable_timeout(&data->falling, HZ/50);
124 	if (ret < 0) {
125 		mutex_unlock(&data->lock);
126 		return ret;
127 	} else if (ret == 0) {
128 		mutex_unlock(&data->lock);
129 		return -ETIMEDOUT;
130 	}
131 
132 	ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
133 
134 	mutex_unlock(&data->lock);
135 
136 	dt_ns = ktime_to_ns(ktime_dt);
137 	/*
138 	 * measuring more than 3 meters is beyond the capabilities of
139 	 * the sensor
140 	 * ==> filter out invalid results for not measuring echos of
141 	 *     another us sensor
142 	 *
143 	 * formula:
144 	 *         distance       3 m
145 	 * time = ---------- = --------- = 9404389 ns
146 	 *          speed       319 m/s
147 	 *
148 	 * using a minimum speed at -20 °C of 319 m/s
149 	 */
150 	if (dt_ns > 9404389)
151 		return -EIO;
152 
153 	time_ns = dt_ns;
154 
155 	/*
156 	 * the speed as function of the temperature is approximately:
157 	 *
158 	 * speed = 331,5 + 0,6 * Temp
159 	 *   with Temp in °C
160 	 *   and speed in m/s
161 	 *
162 	 * use 343 m/s as ultrasonic speed at 20 °C here in absence of the
163 	 * temperature
164 	 *
165 	 * therefore:
166 	 *             time     343
167 	 * distance = ------ * -----
168 	 *             10^6       2
169 	 *   with time in ns
170 	 *   and distance in mm (one way)
171 	 *
172 	 * because we limit to 3 meters the multiplication with 343 just
173 	 * fits into 32 bit
174 	 */
175 	distance_mm = time_ns * 343 / 2000000;
176 
177 	return distance_mm;
178 }
179 
180 static int srf04_read_raw(struct iio_dev *indio_dev,
181 			    struct iio_chan_spec const *channel, int *val,
182 			    int *val2, long info)
183 {
184 	struct srf04_data *data = iio_priv(indio_dev);
185 	int ret;
186 
187 	if (channel->type != IIO_DISTANCE)
188 		return -EINVAL;
189 
190 	switch (info) {
191 	case IIO_CHAN_INFO_RAW:
192 		ret = srf04_read(data);
193 		if (ret < 0)
194 			return ret;
195 		*val = ret;
196 		return IIO_VAL_INT;
197 	case IIO_CHAN_INFO_SCALE:
198 		/*
199 		 * theoretical maximum resolution is 3 mm
200 		 * 1 LSB is 1 mm
201 		 */
202 		*val = 0;
203 		*val2 = 1000;
204 		return IIO_VAL_INT_PLUS_MICRO;
205 	default:
206 		return -EINVAL;
207 	}
208 }
209 
210 static const struct iio_info srf04_iio_info = {
211 	.read_raw		= srf04_read_raw,
212 };
213 
214 static const struct iio_chan_spec srf04_chan_spec[] = {
215 	{
216 		.type = IIO_DISTANCE,
217 		.info_mask_separate =
218 				BIT(IIO_CHAN_INFO_RAW) |
219 				BIT(IIO_CHAN_INFO_SCALE),
220 	},
221 };
222 
223 static const struct of_device_id of_srf04_match[] = {
224 	{ .compatible = "devantech,srf04", .data = &srf04_cfg},
225 	{ .compatible = "maxbotix,mb1000", .data = &mb_lv_cfg},
226 	{ .compatible = "maxbotix,mb1010", .data = &mb_lv_cfg},
227 	{ .compatible = "maxbotix,mb1020", .data = &mb_lv_cfg},
228 	{ .compatible = "maxbotix,mb1030", .data = &mb_lv_cfg},
229 	{ .compatible = "maxbotix,mb1040", .data = &mb_lv_cfg},
230 	{},
231 };
232 
233 MODULE_DEVICE_TABLE(of, of_srf04_match);
234 
235 static int srf04_probe(struct platform_device *pdev)
236 {
237 	struct device *dev = &pdev->dev;
238 	struct srf04_data *data;
239 	struct iio_dev *indio_dev;
240 	int ret;
241 
242 	indio_dev = devm_iio_device_alloc(dev, sizeof(struct srf04_data));
243 	if (!indio_dev) {
244 		dev_err(dev, "failed to allocate IIO device\n");
245 		return -ENOMEM;
246 	}
247 
248 	data = iio_priv(indio_dev);
249 	data->dev = dev;
250 	data->cfg = of_match_device(of_srf04_match, dev)->data;
251 
252 	mutex_init(&data->lock);
253 	init_completion(&data->rising);
254 	init_completion(&data->falling);
255 
256 	data->gpiod_trig = devm_gpiod_get(dev, "trig", GPIOD_OUT_LOW);
257 	if (IS_ERR(data->gpiod_trig)) {
258 		dev_err(dev, "failed to get trig-gpios: err=%ld\n",
259 					PTR_ERR(data->gpiod_trig));
260 		return PTR_ERR(data->gpiod_trig);
261 	}
262 
263 	data->gpiod_echo = devm_gpiod_get(dev, "echo", GPIOD_IN);
264 	if (IS_ERR(data->gpiod_echo)) {
265 		dev_err(dev, "failed to get echo-gpios: err=%ld\n",
266 					PTR_ERR(data->gpiod_echo));
267 		return PTR_ERR(data->gpiod_echo);
268 	}
269 
270 	if (gpiod_cansleep(data->gpiod_echo)) {
271 		dev_err(data->dev, "cansleep-GPIOs not supported\n");
272 		return -ENODEV;
273 	}
274 
275 	data->irqnr = gpiod_to_irq(data->gpiod_echo);
276 	if (data->irqnr < 0) {
277 		dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
278 		return data->irqnr;
279 	}
280 
281 	ret = devm_request_irq(dev, data->irqnr, srf04_handle_irq,
282 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
283 			pdev->name, indio_dev);
284 	if (ret < 0) {
285 		dev_err(data->dev, "request_irq: %d\n", ret);
286 		return ret;
287 	}
288 
289 	platform_set_drvdata(pdev, indio_dev);
290 
291 	indio_dev->name = "srf04";
292 	indio_dev->dev.parent = &pdev->dev;
293 	indio_dev->info = &srf04_iio_info;
294 	indio_dev->modes = INDIO_DIRECT_MODE;
295 	indio_dev->channels = srf04_chan_spec;
296 	indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec);
297 
298 	return devm_iio_device_register(dev, indio_dev);
299 }
300 
301 static struct platform_driver srf04_driver = {
302 	.probe		= srf04_probe,
303 	.driver		= {
304 		.name		= "srf04-gpio",
305 		.of_match_table	= of_srf04_match,
306 	},
307 };
308 
309 module_platform_driver(srf04_driver);
310 
311 MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
312 MODULE_DESCRIPTION("SRF04 ultrasonic sensor for distance measuring using GPIOs");
313 MODULE_LICENSE("GPL");
314 MODULE_ALIAS("platform:srf04");
315