xref: /linux/drivers/iio/proximity/srf04.c (revision 37744feebc086908fd89760650f458ab19071750)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * SRF04: ultrasonic sensor for distance measuring by using GPIOs
4  *
5  * Copyright (c) 2017 Andreas Klinger <ak@it-klinger.de>
6  *
7  * For details about the device see:
8  * http://www.robot-electronics.co.uk/htm/srf04tech.htm
9  *
10  * the measurement cycle as timing diagram looks like:
11  *
12  *          +---+
13  * GPIO     |   |
14  * trig:  --+   +------------------------------------------------------
15  *          ^   ^
16  *          |<->|
17  *         udelay(trigger_pulse_us)
18  *
19  * ultra           +-+ +-+ +-+
20  * sonic           | | | | | |
21  * burst: ---------+ +-+ +-+ +-----------------------------------------
22  *                           .
23  * ultra                     .              +-+ +-+ +-+
24  * sonic                     .              | | | | | |
25  * echo:  ----------------------------------+ +-+ +-+ +----------------
26  *                           .                        .
27  *                           +------------------------+
28  * GPIO                      |                        |
29  * echo:  -------------------+                        +---------------
30  *                           ^                        ^
31  *                           interrupt                interrupt
32  *                           (ts_rising)              (ts_falling)
33  *                           |<---------------------->|
34  *                              pulse time measured
35  *                              --> one round trip of ultra sonic waves
36  */
37 #include <linux/err.h>
38 #include <linux/gpio/consumer.h>
39 #include <linux/kernel.h>
40 #include <linux/module.h>
41 #include <linux/of.h>
42 #include <linux/of_device.h>
43 #include <linux/platform_device.h>
44 #include <linux/property.h>
45 #include <linux/sched.h>
46 #include <linux/interrupt.h>
47 #include <linux/delay.h>
48 #include <linux/pm_runtime.h>
49 #include <linux/iio/iio.h>
50 #include <linux/iio/sysfs.h>
51 
52 struct srf04_cfg {
53 	unsigned long trigger_pulse_us;
54 };
55 
56 struct srf04_data {
57 	struct device		*dev;
58 	struct gpio_desc	*gpiod_trig;
59 	struct gpio_desc	*gpiod_echo;
60 	struct gpio_desc	*gpiod_power;
61 	struct mutex		lock;
62 	int			irqnr;
63 	ktime_t			ts_rising;
64 	ktime_t			ts_falling;
65 	struct completion	rising;
66 	struct completion	falling;
67 	const struct srf04_cfg	*cfg;
68 	int			startup_time_ms;
69 };
70 
71 static const struct srf04_cfg srf04_cfg = {
72 	.trigger_pulse_us = 10,
73 };
74 
75 static const struct srf04_cfg mb_lv_cfg = {
76 	.trigger_pulse_us = 20,
77 };
78 
79 static irqreturn_t srf04_handle_irq(int irq, void *dev_id)
80 {
81 	struct iio_dev *indio_dev = dev_id;
82 	struct srf04_data *data = iio_priv(indio_dev);
83 	ktime_t now = ktime_get();
84 
85 	if (gpiod_get_value(data->gpiod_echo)) {
86 		data->ts_rising = now;
87 		complete(&data->rising);
88 	} else {
89 		data->ts_falling = now;
90 		complete(&data->falling);
91 	}
92 
93 	return IRQ_HANDLED;
94 }
95 
96 static int srf04_read(struct srf04_data *data)
97 {
98 	int ret;
99 	ktime_t ktime_dt;
100 	u64 dt_ns;
101 	u32 time_ns, distance_mm;
102 
103 	if (data->gpiod_power)
104 		pm_runtime_get_sync(data->dev);
105 
106 	/*
107 	 * just one read-echo-cycle can take place at a time
108 	 * ==> lock against concurrent reading calls
109 	 */
110 	mutex_lock(&data->lock);
111 
112 	reinit_completion(&data->rising);
113 	reinit_completion(&data->falling);
114 
115 	gpiod_set_value(data->gpiod_trig, 1);
116 	udelay(data->cfg->trigger_pulse_us);
117 	gpiod_set_value(data->gpiod_trig, 0);
118 
119 	if (data->gpiod_power) {
120 		pm_runtime_mark_last_busy(data->dev);
121 		pm_runtime_put_autosuspend(data->dev);
122 	}
123 
124 	/* it should not take more than 20 ms until echo is rising */
125 	ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
126 	if (ret < 0) {
127 		mutex_unlock(&data->lock);
128 		return ret;
129 	} else if (ret == 0) {
130 		mutex_unlock(&data->lock);
131 		return -ETIMEDOUT;
132 	}
133 
134 	/* it cannot take more than 50 ms until echo is falling */
135 	ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
136 	if (ret < 0) {
137 		mutex_unlock(&data->lock);
138 		return ret;
139 	} else if (ret == 0) {
140 		mutex_unlock(&data->lock);
141 		return -ETIMEDOUT;
142 	}
143 
144 	ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
145 
146 	mutex_unlock(&data->lock);
147 
148 	dt_ns = ktime_to_ns(ktime_dt);
149 	/*
150 	 * measuring more than 6,45 meters is beyond the capabilities of
151 	 * the supported sensors
152 	 * ==> filter out invalid results for not measuring echos of
153 	 *     another us sensor
154 	 *
155 	 * formula:
156 	 *         distance     6,45 * 2 m
157 	 * time = ---------- = ------------ = 40438871 ns
158 	 *          speed         319 m/s
159 	 *
160 	 * using a minimum speed at -20 °C of 319 m/s
161 	 */
162 	if (dt_ns > 40438871)
163 		return -EIO;
164 
165 	time_ns = dt_ns;
166 
167 	/*
168 	 * the speed as function of the temperature is approximately:
169 	 *
170 	 * speed = 331,5 + 0,6 * Temp
171 	 *   with Temp in °C
172 	 *   and speed in m/s
173 	 *
174 	 * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
175 	 * temperature
176 	 *
177 	 * therefore:
178 	 *             time     343,5     time * 106
179 	 * distance = ------ * ------- = ------------
180 	 *             10^6         2         617176
181 	 *   with time in ns
182 	 *   and distance in mm (one way)
183 	 *
184 	 * because we limit to 6,45 meters the multiplication with 106 just
185 	 * fits into 32 bit
186 	 */
187 	distance_mm = time_ns * 106 / 617176;
188 
189 	return distance_mm;
190 }
191 
192 static int srf04_read_raw(struct iio_dev *indio_dev,
193 			    struct iio_chan_spec const *channel, int *val,
194 			    int *val2, long info)
195 {
196 	struct srf04_data *data = iio_priv(indio_dev);
197 	int ret;
198 
199 	if (channel->type != IIO_DISTANCE)
200 		return -EINVAL;
201 
202 	switch (info) {
203 	case IIO_CHAN_INFO_RAW:
204 		ret = srf04_read(data);
205 		if (ret < 0)
206 			return ret;
207 		*val = ret;
208 		return IIO_VAL_INT;
209 	case IIO_CHAN_INFO_SCALE:
210 		/*
211 		 * theoretical maximum resolution is 3 mm
212 		 * 1 LSB is 1 mm
213 		 */
214 		*val = 0;
215 		*val2 = 1000;
216 		return IIO_VAL_INT_PLUS_MICRO;
217 	default:
218 		return -EINVAL;
219 	}
220 }
221 
222 static const struct iio_info srf04_iio_info = {
223 	.read_raw		= srf04_read_raw,
224 };
225 
226 static const struct iio_chan_spec srf04_chan_spec[] = {
227 	{
228 		.type = IIO_DISTANCE,
229 		.info_mask_separate =
230 				BIT(IIO_CHAN_INFO_RAW) |
231 				BIT(IIO_CHAN_INFO_SCALE),
232 	},
233 };
234 
235 static const struct of_device_id of_srf04_match[] = {
236 	{ .compatible = "devantech,srf04", .data = &srf04_cfg},
237 	{ .compatible = "maxbotix,mb1000", .data = &mb_lv_cfg},
238 	{ .compatible = "maxbotix,mb1010", .data = &mb_lv_cfg},
239 	{ .compatible = "maxbotix,mb1020", .data = &mb_lv_cfg},
240 	{ .compatible = "maxbotix,mb1030", .data = &mb_lv_cfg},
241 	{ .compatible = "maxbotix,mb1040", .data = &mb_lv_cfg},
242 	{},
243 };
244 
245 MODULE_DEVICE_TABLE(of, of_srf04_match);
246 
247 static int srf04_probe(struct platform_device *pdev)
248 {
249 	struct device *dev = &pdev->dev;
250 	struct srf04_data *data;
251 	struct iio_dev *indio_dev;
252 	int ret;
253 
254 	indio_dev = devm_iio_device_alloc(dev, sizeof(struct srf04_data));
255 	if (!indio_dev) {
256 		dev_err(dev, "failed to allocate IIO device\n");
257 		return -ENOMEM;
258 	}
259 
260 	data = iio_priv(indio_dev);
261 	data->dev = dev;
262 	data->cfg = of_match_device(of_srf04_match, dev)->data;
263 
264 	mutex_init(&data->lock);
265 	init_completion(&data->rising);
266 	init_completion(&data->falling);
267 
268 	data->gpiod_trig = devm_gpiod_get(dev, "trig", GPIOD_OUT_LOW);
269 	if (IS_ERR(data->gpiod_trig)) {
270 		dev_err(dev, "failed to get trig-gpios: err=%ld\n",
271 					PTR_ERR(data->gpiod_trig));
272 		return PTR_ERR(data->gpiod_trig);
273 	}
274 
275 	data->gpiod_echo = devm_gpiod_get(dev, "echo", GPIOD_IN);
276 	if (IS_ERR(data->gpiod_echo)) {
277 		dev_err(dev, "failed to get echo-gpios: err=%ld\n",
278 					PTR_ERR(data->gpiod_echo));
279 		return PTR_ERR(data->gpiod_echo);
280 	}
281 
282 	data->gpiod_power = devm_gpiod_get_optional(dev, "power",
283 								GPIOD_OUT_LOW);
284 	if (IS_ERR(data->gpiod_power)) {
285 		dev_err(dev, "failed to get power-gpios: err=%ld\n",
286 						PTR_ERR(data->gpiod_power));
287 		return PTR_ERR(data->gpiod_power);
288 	}
289 	if (data->gpiod_power) {
290 
291 		if (of_property_read_u32(dev->of_node, "startup-time-ms",
292 						&data->startup_time_ms))
293 			data->startup_time_ms = 100;
294 		dev_dbg(dev, "using power gpio: startup-time-ms=%d\n",
295 							data->startup_time_ms);
296 	}
297 
298 	if (gpiod_cansleep(data->gpiod_echo)) {
299 		dev_err(data->dev, "cansleep-GPIOs not supported\n");
300 		return -ENODEV;
301 	}
302 
303 	data->irqnr = gpiod_to_irq(data->gpiod_echo);
304 	if (data->irqnr < 0) {
305 		dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
306 		return data->irqnr;
307 	}
308 
309 	ret = devm_request_irq(dev, data->irqnr, srf04_handle_irq,
310 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
311 			pdev->name, indio_dev);
312 	if (ret < 0) {
313 		dev_err(data->dev, "request_irq: %d\n", ret);
314 		return ret;
315 	}
316 
317 	platform_set_drvdata(pdev, indio_dev);
318 
319 	indio_dev->name = "srf04";
320 	indio_dev->dev.parent = &pdev->dev;
321 	indio_dev->info = &srf04_iio_info;
322 	indio_dev->modes = INDIO_DIRECT_MODE;
323 	indio_dev->channels = srf04_chan_spec;
324 	indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec);
325 
326 	ret = iio_device_register(indio_dev);
327 	if (ret < 0) {
328 		dev_err(data->dev, "iio_device_register: %d\n", ret);
329 		return ret;
330 	}
331 
332 	if (data->gpiod_power) {
333 		pm_runtime_set_autosuspend_delay(data->dev, 1000);
334 		pm_runtime_use_autosuspend(data->dev);
335 
336 		ret = pm_runtime_set_active(data->dev);
337 		if (ret) {
338 			dev_err(data->dev, "pm_runtime_set_active: %d\n", ret);
339 			iio_device_unregister(indio_dev);
340 		}
341 
342 		pm_runtime_enable(data->dev);
343 		pm_runtime_idle(data->dev);
344 	}
345 
346 	return ret;
347 }
348 
349 static int srf04_remove(struct platform_device *pdev)
350 {
351 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
352 	struct srf04_data *data = iio_priv(indio_dev);
353 
354 	iio_device_unregister(indio_dev);
355 
356 	if (data->gpiod_power) {
357 		pm_runtime_disable(data->dev);
358 		pm_runtime_set_suspended(data->dev);
359 	}
360 
361 	return 0;
362 }
363 
364 static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev)
365 {
366 	struct platform_device *pdev = container_of(dev,
367 						struct platform_device, dev);
368 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
369 	struct srf04_data *data = iio_priv(indio_dev);
370 
371 	gpiod_set_value(data->gpiod_power, 0);
372 
373 	return 0;
374 }
375 
376 static int __maybe_unused srf04_pm_runtime_resume(struct device *dev)
377 {
378 	struct platform_device *pdev = container_of(dev,
379 						struct platform_device, dev);
380 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
381 	struct srf04_data *data = iio_priv(indio_dev);
382 
383 	gpiod_set_value(data->gpiod_power, 1);
384 	msleep(data->startup_time_ms);
385 
386 	return 0;
387 }
388 
389 static const struct dev_pm_ops srf04_pm_ops = {
390 	SET_RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
391 				srf04_pm_runtime_resume, NULL)
392 };
393 
394 static struct platform_driver srf04_driver = {
395 	.probe		= srf04_probe,
396 	.remove		= srf04_remove,
397 	.driver		= {
398 		.name		= "srf04-gpio",
399 		.of_match_table	= of_srf04_match,
400 		.pm		= &srf04_pm_ops,
401 	},
402 };
403 
404 module_platform_driver(srf04_driver);
405 
406 MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
407 MODULE_DESCRIPTION("SRF04 ultrasonic sensor for distance measuring using GPIOs");
408 MODULE_LICENSE("GPL");
409 MODULE_ALIAS("platform:srf04");
410