1# 2# Pressure drivers 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Pressure sensors" 7 8config BMP280 9 tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" 10 depends on (I2C || SPI_MASTER) 11 select REGMAP 12 select BMP280_I2C if (I2C) 13 select BMP280_SPI if (SPI_MASTER) 14 help 15 Say yes here to build support for Bosch Sensortec BMP180 and BMP280 16 pressure and temperature sensors. Also supports the BE280 with 17 an additional humidity sensor channel. 18 19 To compile this driver as a module, choose M here: the core module 20 will be called bmp280 and you will also get bmp280-i2c for I2C 21 and/or bmp280-spi for SPI support. 22 23config BMP280_I2C 24 tristate 25 depends on BMP280 26 depends on I2C 27 select REGMAP_I2C 28 29config BMP280_SPI 30 tristate 31 depends on BMP280 32 depends on SPI_MASTER 33 select REGMAP 34 35config HID_SENSOR_PRESS 36 depends on HID_SENSOR_HUB 37 select IIO_BUFFER 38 select IIO_TRIGGERED_BUFFER 39 select HID_SENSOR_IIO_COMMON 40 select HID_SENSOR_IIO_TRIGGER 41 tristate "HID PRESS" 42 help 43 Say yes here to build support for the HID SENSOR 44 Pressure driver 45 46 To compile this driver as a module, choose M here: the module 47 will be called hid-sensor-press. 48 49config HP03 50 tristate "Hope RF HP03 temperature and pressure sensor driver" 51 depends on I2C 52 select REGMAP_I2C 53 help 54 Say yes here to build support for Hope RF HP03 pressure and 55 temperature sensor. 56 57 To compile this driver as a module, choose M here: the module 58 will be called hp03. 59 60config MPL115 61 tristate 62 63config MPL115_I2C 64 tristate "Freescale MPL115A2 pressure sensor driver" 65 depends on I2C 66 select MPL115 67 help 68 Say yes here to build support for the Freescale MPL115A2 69 pressure sensor connected via I2C. 70 71 To compile this driver as a module, choose M here: the module 72 will be called mpl115_i2c. 73 74config MPL115_SPI 75 tristate "Freescale MPL115A1 pressure sensor driver" 76 depends on SPI_MASTER 77 select MPL115 78 help 79 Say yes here to build support for the Freescale MPL115A1 80 pressure sensor connected via SPI. 81 82 To compile this driver as a module, choose M here: the module 83 will be called mpl115_spi. 84 85config MPL3115 86 tristate "Freescale MPL3115A2 pressure sensor driver" 87 depends on I2C 88 select IIO_BUFFER 89 select IIO_TRIGGERED_BUFFER 90 help 91 Say yes here to build support for the Freescale MPL3115A2 92 pressure sensor / altimeter. 93 94 To compile this driver as a module, choose M here: the module 95 will be called mpl3115. 96 97config MS5611 98 tristate "Measurement Specialties MS5611 pressure sensor driver" 99 select IIO_BUFFER 100 select IIO_TRIGGERED_BUFFER 101 help 102 Say Y here to build support for the Measurement Specialties 103 MS5611, MS5607 pressure and temperature sensors. 104 105 To compile this driver as a module, choose M here: the module will 106 be called ms5611_core. 107 108config MS5611_I2C 109 tristate "support I2C bus connection" 110 depends on I2C && MS5611 111 help 112 Say Y here to build I2C bus support for MS5611. 113 114 To compile this driver as a module, choose M here: the module will 115 be called ms5611_i2c. 116 117config MS5611_SPI 118 tristate "support SPI bus connection" 119 depends on SPI_MASTER && MS5611 120 help 121 Say Y here to build SPI bus support for MS5611. 122 123 To compile this driver as a module, choose M here: the module will 124 be called ms5611_spi. 125 126config MS5637 127 tristate "Measurement Specialties MS5637 pressure & temperature sensor" 128 depends on I2C 129 select IIO_MS_SENSORS_I2C 130 help 131 If you say yes here you get support for the Measurement Specialties 132 MS5637 pressure and temperature sensor. 133 This driver is also used for MS8607 temperature, pressure & humidity 134 sensor 135 136 This driver can also be built as a module. If so, the module will 137 be called ms5637. 138 139config IIO_ST_PRESS 140 tristate "STMicroelectronics pressure sensor Driver" 141 depends on (I2C || SPI_MASTER) && SYSFS 142 select IIO_ST_SENSORS_CORE 143 select IIO_ST_PRESS_I2C if (I2C) 144 select IIO_ST_PRESS_SPI if (SPI_MASTER) 145 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 146 help 147 Say yes here to build support for STMicroelectronics pressure 148 sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB. 149 150 This driver can also be built as a module. If so, these modules 151 will be created: 152 - st_pressure (core functions for the driver [it is mandatory]); 153 - st_pressure_i2c (necessary for the I2C devices [optional*]); 154 - st_pressure_spi (necessary for the SPI devices [optional*]); 155 156 (*) one of these is necessary to do something. 157 158config IIO_ST_PRESS_I2C 159 tristate 160 depends on IIO_ST_PRESS 161 depends on IIO_ST_SENSORS_I2C 162 163config IIO_ST_PRESS_SPI 164 tristate 165 depends on IIO_ST_PRESS 166 depends on IIO_ST_SENSORS_SPI 167 168config T5403 169 tristate "EPCOS T5403 digital barometric pressure sensor driver" 170 depends on I2C 171 help 172 Say yes here to build support for the EPCOS T5403 pressure sensor 173 connected via I2C. 174 175 To compile this driver as a module, choose M here: the module 176 will be called t5403. 177 178config HP206C 179 tristate "HOPERF HP206C precision barometer and altimeter sensor" 180 depends on I2C 181 help 182 Say yes here to build support for the HOPREF HP206C precision 183 barometer and altimeter sensor. 184 185 This driver can also be built as a module. If so, the module will 186 be called hp206c. 187 188config ZPA2326 189 tristate "Murata ZPA2326 pressure sensor driver" 190 select IIO_BUFFER 191 select IIO_TRIGGERED_BUFFER 192 select REGMAP 193 select ZPA2326_I2C if I2C 194 select ZPA2326_SPI if SPI_MASTER 195 help 196 Say Y here to build support for the Murata ZPA2326 pressure and 197 temperature sensor. 198 199 To compile this driver as a module, choose M here: the module will 200 be called zpa2326. 201 202config ZPA2326_I2C 203 tristate 204 select REGMAP_I2C 205 206config ZPA2326_SPI 207 tristate 208 select REGMAP_SPI 209 210endmenu 211