xref: /linux/drivers/iio/orientation/hid-sensor-incl-3d.c (revision 3d0fe49454652117522f60bfbefb978ba0e5300b)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * HID Sensors Driver
4  * Copyright (c) 2013, Intel Corporation.
5  */
6 
7 #include <linux/device.h>
8 #include <linux/platform_device.h>
9 #include <linux/module.h>
10 #include <linux/mod_devicetable.h>
11 #include <linux/slab.h>
12 #include <linux/hid-sensor-hub.h>
13 #include <linux/iio/iio.h>
14 #include <linux/iio/buffer.h>
15 #include "../common/hid-sensors/hid-sensor-trigger.h"
16 
17 enum incl_3d_channel {
18 	CHANNEL_SCAN_INDEX_X,
19 	CHANNEL_SCAN_INDEX_Y,
20 	CHANNEL_SCAN_INDEX_Z,
21 	INCLI_3D_CHANNEL_MAX,
22 };
23 
24 #define CHANNEL_SCAN_INDEX_TIMESTAMP INCLI_3D_CHANNEL_MAX
25 
26 struct incl_3d_state {
27 	struct hid_sensor_hub_callbacks callbacks;
28 	struct hid_sensor_common common_attributes;
29 	struct hid_sensor_hub_attribute_info incl[INCLI_3D_CHANNEL_MAX];
30 	struct {
31 		u32 incl_val[INCLI_3D_CHANNEL_MAX];
32 		u64 timestamp __aligned(8);
33 	} scan;
34 	int scale_pre_decml;
35 	int scale_post_decml;
36 	int scale_precision;
37 	int value_offset;
38 	s64 timestamp;
39 };
40 
41 static const u32 incl_3d_addresses[INCLI_3D_CHANNEL_MAX] = {
42 	HID_USAGE_SENSOR_ORIENT_TILT_X,
43 	HID_USAGE_SENSOR_ORIENT_TILT_Y,
44 	HID_USAGE_SENSOR_ORIENT_TILT_Z
45 };
46 
47 static const u32 incl_3d_sensitivity_addresses[] = {
48 	HID_USAGE_SENSOR_DATA_ORIENTATION,
49 	HID_USAGE_SENSOR_ORIENT_TILT,
50 };
51 
52 /* Channel definitions */
53 static const struct iio_chan_spec incl_3d_channels[] = {
54 	{
55 		.type = IIO_INCLI,
56 		.modified = 1,
57 		.channel2 = IIO_MOD_X,
58 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
59 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
60 		BIT(IIO_CHAN_INFO_SCALE) |
61 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
62 		BIT(IIO_CHAN_INFO_HYSTERESIS),
63 		.scan_index = CHANNEL_SCAN_INDEX_X,
64 	}, {
65 		.type = IIO_INCLI,
66 		.modified = 1,
67 		.channel2 = IIO_MOD_Y,
68 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
69 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
70 		BIT(IIO_CHAN_INFO_SCALE) |
71 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
72 		BIT(IIO_CHAN_INFO_HYSTERESIS),
73 		.scan_index = CHANNEL_SCAN_INDEX_Y,
74 	}, {
75 		.type = IIO_INCLI,
76 		.modified = 1,
77 		.channel2 = IIO_MOD_Z,
78 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
79 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
80 		BIT(IIO_CHAN_INFO_SCALE) |
81 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
82 		BIT(IIO_CHAN_INFO_HYSTERESIS),
83 		.scan_index = CHANNEL_SCAN_INDEX_Z,
84 	},
85 	IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP),
86 };
87 
88 /* Adjust channel real bits based on report descriptor */
89 static void incl_3d_adjust_channel_bit_mask(struct iio_chan_spec *chan,
90 						int size)
91 {
92 	chan->scan_type.sign = 's';
93 	/* Real storage bits will change based on the report desc. */
94 	chan->scan_type.realbits = size * 8;
95 	/* Maximum size of a sample to capture is u32 */
96 	chan->scan_type.storagebits = sizeof(u32) * 8;
97 }
98 
99 /* Channel read_raw handler */
100 static int incl_3d_read_raw(struct iio_dev *indio_dev,
101 			      struct iio_chan_spec const *chan,
102 			      int *val, int *val2,
103 			      long mask)
104 {
105 	struct incl_3d_state *incl_state = iio_priv(indio_dev);
106 	int report_id = -1;
107 	u32 address;
108 	int ret_type;
109 	s32 min;
110 
111 	*val = 0;
112 	*val2 = 0;
113 	switch (mask) {
114 	case IIO_CHAN_INFO_RAW:
115 		hid_sensor_power_state(&incl_state->common_attributes, true);
116 		report_id = incl_state->incl[chan->scan_index].report_id;
117 		min = incl_state->incl[chan->scan_index].logical_minimum;
118 		address = incl_3d_addresses[chan->scan_index];
119 		if (report_id >= 0)
120 			*val = sensor_hub_input_attr_get_raw_value(
121 				incl_state->common_attributes.hsdev,
122 				HID_USAGE_SENSOR_INCLINOMETER_3D, address,
123 				report_id,
124 				SENSOR_HUB_SYNC,
125 				min < 0);
126 		else {
127 			hid_sensor_power_state(&incl_state->common_attributes,
128 						false);
129 			return -EINVAL;
130 		}
131 		hid_sensor_power_state(&incl_state->common_attributes, false);
132 		ret_type = IIO_VAL_INT;
133 		break;
134 	case IIO_CHAN_INFO_SCALE:
135 		*val = incl_state->scale_pre_decml;
136 		*val2 = incl_state->scale_post_decml;
137 		ret_type = incl_state->scale_precision;
138 		break;
139 	case IIO_CHAN_INFO_OFFSET:
140 		*val = incl_state->value_offset;
141 		ret_type = IIO_VAL_INT;
142 		break;
143 	case IIO_CHAN_INFO_SAMP_FREQ:
144 		ret_type = hid_sensor_read_samp_freq_value(
145 			&incl_state->common_attributes, val, val2);
146 		break;
147 	case IIO_CHAN_INFO_HYSTERESIS:
148 		ret_type = hid_sensor_read_raw_hyst_value(
149 			&incl_state->common_attributes, val, val2);
150 		break;
151 	default:
152 		ret_type = -EINVAL;
153 		break;
154 	}
155 
156 	return ret_type;
157 }
158 
159 /* Channel write_raw handler */
160 static int incl_3d_write_raw(struct iio_dev *indio_dev,
161 			       struct iio_chan_spec const *chan,
162 			       int val,
163 			       int val2,
164 			       long mask)
165 {
166 	struct incl_3d_state *incl_state = iio_priv(indio_dev);
167 	int ret;
168 
169 	switch (mask) {
170 	case IIO_CHAN_INFO_SAMP_FREQ:
171 		ret = hid_sensor_write_samp_freq_value(
172 				&incl_state->common_attributes, val, val2);
173 		break;
174 	case IIO_CHAN_INFO_HYSTERESIS:
175 		ret = hid_sensor_write_raw_hyst_value(
176 				&incl_state->common_attributes, val, val2);
177 		break;
178 	default:
179 		ret = -EINVAL;
180 	}
181 
182 	return ret;
183 }
184 
185 static const struct iio_info incl_3d_info = {
186 	.read_raw = &incl_3d_read_raw,
187 	.write_raw = &incl_3d_write_raw,
188 };
189 
190 /* Callback handler to send event after all samples are received and captured */
191 static int incl_3d_proc_event(struct hid_sensor_hub_device *hsdev,
192 				unsigned usage_id,
193 				void *priv)
194 {
195 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
196 	struct incl_3d_state *incl_state = iio_priv(indio_dev);
197 
198 	dev_dbg(&indio_dev->dev, "incl_3d_proc_event\n");
199 	if (atomic_read(&incl_state->common_attributes.data_ready)) {
200 		if (!incl_state->timestamp)
201 			incl_state->timestamp = iio_get_time_ns(indio_dev);
202 
203 		iio_push_to_buffers_with_timestamp(indio_dev,
204 						   &incl_state->scan,
205 						   incl_state->timestamp);
206 
207 		incl_state->timestamp = 0;
208 	}
209 
210 	return 0;
211 }
212 
213 /* Capture samples in local storage */
214 static int incl_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
215 				unsigned usage_id,
216 				size_t raw_len, char *raw_data,
217 				void *priv)
218 {
219 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
220 	struct incl_3d_state *incl_state = iio_priv(indio_dev);
221 	int ret = 0;
222 
223 	switch (usage_id) {
224 	case HID_USAGE_SENSOR_ORIENT_TILT_X:
225 		incl_state->scan.incl_val[CHANNEL_SCAN_INDEX_X] = *(u32 *)raw_data;
226 	break;
227 	case HID_USAGE_SENSOR_ORIENT_TILT_Y:
228 		incl_state->scan.incl_val[CHANNEL_SCAN_INDEX_Y] = *(u32 *)raw_data;
229 	break;
230 	case HID_USAGE_SENSOR_ORIENT_TILT_Z:
231 		incl_state->scan.incl_val[CHANNEL_SCAN_INDEX_Z] = *(u32 *)raw_data;
232 	break;
233 	case HID_USAGE_SENSOR_TIME_TIMESTAMP:
234 		incl_state->timestamp =
235 			hid_sensor_convert_timestamp(&incl_state->common_attributes,
236 						     *(s64 *)raw_data);
237 	break;
238 	default:
239 		ret = -EINVAL;
240 		break;
241 	}
242 
243 	return ret;
244 }
245 
246 /* Parse report which is specific to an usage id*/
247 static int incl_3d_parse_report(struct platform_device *pdev,
248 				struct hid_sensor_hub_device *hsdev,
249 				struct iio_chan_spec *channels,
250 				unsigned usage_id,
251 				struct incl_3d_state *st)
252 {
253 	int ret;
254 
255 	ret = sensor_hub_input_get_attribute_info(hsdev,
256 				HID_INPUT_REPORT,
257 				usage_id,
258 				HID_USAGE_SENSOR_ORIENT_TILT_X,
259 				&st->incl[CHANNEL_SCAN_INDEX_X]);
260 	if (ret)
261 		return ret;
262 	incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_X],
263 				st->incl[CHANNEL_SCAN_INDEX_X].size);
264 
265 	ret = sensor_hub_input_get_attribute_info(hsdev,
266 				HID_INPUT_REPORT,
267 				usage_id,
268 				HID_USAGE_SENSOR_ORIENT_TILT_Y,
269 				&st->incl[CHANNEL_SCAN_INDEX_Y]);
270 	if (ret)
271 		return ret;
272 	incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Y],
273 				st->incl[CHANNEL_SCAN_INDEX_Y].size);
274 
275 	ret = sensor_hub_input_get_attribute_info(hsdev,
276 				HID_INPUT_REPORT,
277 				usage_id,
278 				HID_USAGE_SENSOR_ORIENT_TILT_Z,
279 				&st->incl[CHANNEL_SCAN_INDEX_Z]);
280 	if (ret)
281 		return ret;
282 	incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Z],
283 				st->incl[CHANNEL_SCAN_INDEX_Z].size);
284 
285 	dev_dbg(&pdev->dev, "incl_3d %x:%x, %x:%x, %x:%x\n",
286 			st->incl[0].index,
287 			st->incl[0].report_id,
288 			st->incl[1].index, st->incl[1].report_id,
289 			st->incl[2].index, st->incl[2].report_id);
290 
291 	st->scale_precision = hid_sensor_format_scale(
292 				HID_USAGE_SENSOR_INCLINOMETER_3D,
293 				&st->incl[CHANNEL_SCAN_INDEX_X],
294 				&st->scale_pre_decml, &st->scale_post_decml);
295 
296 	return ret;
297 }
298 
299 /* Function to initialize the processing for usage id */
300 static int hid_incl_3d_probe(struct platform_device *pdev)
301 {
302 	int ret;
303 	static char *name = "incli_3d";
304 	struct iio_dev *indio_dev;
305 	struct incl_3d_state *incl_state;
306 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
307 
308 	indio_dev = devm_iio_device_alloc(&pdev->dev,
309 					  sizeof(struct incl_3d_state));
310 	if (indio_dev == NULL)
311 		return -ENOMEM;
312 
313 	platform_set_drvdata(pdev, indio_dev);
314 
315 	incl_state = iio_priv(indio_dev);
316 	incl_state->common_attributes.hsdev = hsdev;
317 	incl_state->common_attributes.pdev = pdev;
318 
319 	ret = hid_sensor_parse_common_attributes(hsdev,
320 				HID_USAGE_SENSOR_INCLINOMETER_3D,
321 				&incl_state->common_attributes,
322 				incl_3d_sensitivity_addresses,
323 				ARRAY_SIZE(incl_3d_sensitivity_addresses));
324 	if (ret) {
325 		dev_err(&pdev->dev, "failed to setup common attributes\n");
326 		return ret;
327 	}
328 
329 	indio_dev->channels = devm_kmemdup(&pdev->dev, incl_3d_channels,
330 					   sizeof(incl_3d_channels), GFP_KERNEL);
331 	if (!indio_dev->channels) {
332 		dev_err(&pdev->dev, "failed to duplicate channels\n");
333 		return -ENOMEM;
334 	}
335 
336 	ret = incl_3d_parse_report(pdev, hsdev,
337 				   (struct iio_chan_spec *)indio_dev->channels,
338 				   HID_USAGE_SENSOR_INCLINOMETER_3D,
339 				   incl_state);
340 	if (ret) {
341 		dev_err(&pdev->dev, "failed to setup attributes\n");
342 		return ret;
343 	}
344 
345 	indio_dev->num_channels = ARRAY_SIZE(incl_3d_channels);
346 	indio_dev->info = &incl_3d_info;
347 	indio_dev->name = name;
348 	indio_dev->modes = INDIO_DIRECT_MODE;
349 
350 	atomic_set(&incl_state->common_attributes.data_ready, 0);
351 
352 	ret = hid_sensor_setup_trigger(indio_dev, name,
353 					&incl_state->common_attributes);
354 	if (ret) {
355 		dev_err(&pdev->dev, "trigger setup failed\n");
356 		return ret;
357 	}
358 
359 	ret = iio_device_register(indio_dev);
360 	if (ret) {
361 		dev_err(&pdev->dev, "device register failed\n");
362 		goto error_remove_trigger;
363 	}
364 
365 	incl_state->callbacks.send_event = incl_3d_proc_event;
366 	incl_state->callbacks.capture_sample = incl_3d_capture_sample;
367 	incl_state->callbacks.pdev = pdev;
368 	ret = sensor_hub_register_callback(hsdev,
369 					HID_USAGE_SENSOR_INCLINOMETER_3D,
370 					&incl_state->callbacks);
371 	if (ret) {
372 		dev_err(&pdev->dev, "callback reg failed\n");
373 		goto error_iio_unreg;
374 	}
375 
376 	return 0;
377 
378 error_iio_unreg:
379 	iio_device_unregister(indio_dev);
380 error_remove_trigger:
381 	hid_sensor_remove_trigger(indio_dev, &incl_state->common_attributes);
382 	return ret;
383 }
384 
385 /* Function to deinitialize the processing for usage id */
386 static void hid_incl_3d_remove(struct platform_device *pdev)
387 {
388 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
389 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
390 	struct incl_3d_state *incl_state = iio_priv(indio_dev);
391 
392 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D);
393 	iio_device_unregister(indio_dev);
394 	hid_sensor_remove_trigger(indio_dev, &incl_state->common_attributes);
395 }
396 
397 static const struct platform_device_id hid_incl_3d_ids[] = {
398 	{
399 		/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
400 		.name = "HID-SENSOR-200086",
401 	},
402 	{ /* sentinel */ }
403 };
404 MODULE_DEVICE_TABLE(platform, hid_incl_3d_ids);
405 
406 static struct platform_driver hid_incl_3d_platform_driver = {
407 	.id_table = hid_incl_3d_ids,
408 	.driver = {
409 		.name	= KBUILD_MODNAME,
410 		.pm	= &hid_sensor_pm_ops,
411 	},
412 	.probe		= hid_incl_3d_probe,
413 	.remove_new	= hid_incl_3d_remove,
414 };
415 module_platform_driver(hid_incl_3d_platform_driver);
416 
417 MODULE_DESCRIPTION("HID Sensor Inclinometer 3D");
418 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
419 MODULE_LICENSE("GPL");
420 MODULE_IMPORT_NS(IIO_HID);
421