xref: /linux/drivers/iio/light/gp2ap020a00f.c (revision c0c914eca7f251c70facc37dfebeaf176601918d)
1 /*
2  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
3  * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
4  *
5  * IIO features supported by the driver:
6  *
7  * Read-only raw channels:
8  *   - illuminance_clear [lux]
9  *   - illuminance_ir
10  *   - proximity
11  *
12  * Triggered buffer:
13  *   - illuminance_clear
14  *   - illuminance_ir
15  *   - proximity
16  *
17  * Events:
18  *   - illuminance_clear (rising and falling)
19  *   - proximity (rising and falling)
20  *     - both falling and rising thresholds for the proximity events
21  *       must be set to the values greater than 0.
22  *
23  * The driver supports triggered buffers for all the three
24  * channels as well as high and low threshold events for the
25  * illuminance_clear and proxmimity channels. Triggers
26  * can be enabled simultaneously with both illuminance_clear
27  * events. Proximity events cannot be enabled simultaneously
28  * with any triggers or illuminance events. Enabling/disabling
29  * one of the proximity events automatically enables/disables
30  * the other one.
31  *
32  * This program is free software; you can redistribute it and/or modify
33  * it under the terms of the GNU General Public License version 2, as
34  * published by the Free Software Foundation.
35  */
36 
37 #include <linux/debugfs.h>
38 #include <linux/delay.h>
39 #include <linux/i2c.h>
40 #include <linux/interrupt.h>
41 #include <linux/irq.h>
42 #include <linux/irq_work.h>
43 #include <linux/module.h>
44 #include <linux/mutex.h>
45 #include <linux/of.h>
46 #include <linux/regmap.h>
47 #include <linux/regulator/consumer.h>
48 #include <linux/slab.h>
49 #include <asm/unaligned.h>
50 #include <linux/iio/buffer.h>
51 #include <linux/iio/events.h>
52 #include <linux/iio/iio.h>
53 #include <linux/iio/sysfs.h>
54 #include <linux/iio/trigger.h>
55 #include <linux/iio/trigger_consumer.h>
56 #include <linux/iio/triggered_buffer.h>
57 
58 #define GP2A_I2C_NAME "gp2ap020a00f"
59 
60 /* Registers */
61 #define GP2AP020A00F_OP_REG	0x00 /* Basic operations */
62 #define GP2AP020A00F_ALS_REG	0x01 /* ALS related settings */
63 #define GP2AP020A00F_PS_REG	0x02 /* PS related settings */
64 #define GP2AP020A00F_LED_REG	0x03 /* LED reg */
65 #define GP2AP020A00F_TL_L_REG	0x04 /* ALS: Threshold low LSB */
66 #define GP2AP020A00F_TL_H_REG	0x05 /* ALS: Threshold low MSB */
67 #define GP2AP020A00F_TH_L_REG	0x06 /* ALS: Threshold high LSB */
68 #define GP2AP020A00F_TH_H_REG	0x07 /* ALS: Threshold high MSB */
69 #define GP2AP020A00F_PL_L_REG	0x08 /* PS: Threshold low LSB */
70 #define GP2AP020A00F_PL_H_REG	0x09 /* PS: Threshold low MSB */
71 #define GP2AP020A00F_PH_L_REG	0x0a /* PS: Threshold high LSB */
72 #define GP2AP020A00F_PH_H_REG	0x0b /* PS: Threshold high MSB */
73 #define GP2AP020A00F_D0_L_REG	0x0c /* ALS result: Clear/Illuminance LSB */
74 #define GP2AP020A00F_D0_H_REG	0x0d /* ALS result: Clear/Illuminance MSB */
75 #define GP2AP020A00F_D1_L_REG	0x0e /* ALS result: IR LSB */
76 #define GP2AP020A00F_D1_H_REG	0x0f /* ALS result: IR LSB */
77 #define GP2AP020A00F_D2_L_REG	0x10 /* PS result LSB */
78 #define GP2AP020A00F_D2_H_REG	0x11 /* PS result MSB */
79 #define GP2AP020A00F_NUM_REGS	0x12 /* Number of registers */
80 
81 /* OP_REG bits */
82 #define GP2AP020A00F_OP3_MASK		0x80 /* Software shutdown */
83 #define GP2AP020A00F_OP3_SHUTDOWN	0x00
84 #define GP2AP020A00F_OP3_OPERATION	0x80
85 #define GP2AP020A00F_OP2_MASK		0x40 /* Auto shutdown/Continuous mode */
86 #define GP2AP020A00F_OP2_AUTO_SHUTDOWN	0x00
87 #define GP2AP020A00F_OP2_CONT_OPERATION	0x40
88 #define GP2AP020A00F_OP_MASK		0x30 /* Operating mode selection  */
89 #define GP2AP020A00F_OP_ALS_AND_PS	0x00
90 #define GP2AP020A00F_OP_ALS		0x10
91 #define GP2AP020A00F_OP_PS		0x20
92 #define GP2AP020A00F_OP_DEBUG		0x30
93 #define GP2AP020A00F_PROX_MASK		0x08 /* PS: detection/non-detection */
94 #define GP2AP020A00F_PROX_NON_DETECT	0x00
95 #define GP2AP020A00F_PROX_DETECT	0x08
96 #define GP2AP020A00F_FLAG_P		0x04 /* PS: interrupt result  */
97 #define GP2AP020A00F_FLAG_A		0x02 /* ALS: interrupt result  */
98 #define GP2AP020A00F_TYPE_MASK		0x01 /* Output data type selection */
99 #define GP2AP020A00F_TYPE_MANUAL_CALC	0x00
100 #define GP2AP020A00F_TYPE_AUTO_CALC	0x01
101 
102 /* ALS_REG bits */
103 #define GP2AP020A00F_PRST_MASK		0xc0 /* Number of measurement cycles */
104 #define GP2AP020A00F_PRST_ONCE		0x00
105 #define GP2AP020A00F_PRST_4_CYCLES	0x40
106 #define GP2AP020A00F_PRST_8_CYCLES	0x80
107 #define GP2AP020A00F_PRST_16_CYCLES	0xc0
108 #define GP2AP020A00F_RES_A_MASK		0x38 /* ALS: Resolution */
109 #define GP2AP020A00F_RES_A_800ms	0x00
110 #define GP2AP020A00F_RES_A_400ms	0x08
111 #define GP2AP020A00F_RES_A_200ms	0x10
112 #define GP2AP020A00F_RES_A_100ms	0x18
113 #define GP2AP020A00F_RES_A_25ms		0x20
114 #define GP2AP020A00F_RES_A_6_25ms	0x28
115 #define GP2AP020A00F_RES_A_1_56ms	0x30
116 #define GP2AP020A00F_RES_A_0_39ms	0x38
117 #define GP2AP020A00F_RANGE_A_MASK	0x07 /* ALS: Max measurable range */
118 #define GP2AP020A00F_RANGE_A_x1		0x00
119 #define GP2AP020A00F_RANGE_A_x2		0x01
120 #define GP2AP020A00F_RANGE_A_x4		0x02
121 #define GP2AP020A00F_RANGE_A_x8		0x03
122 #define GP2AP020A00F_RANGE_A_x16	0x04
123 #define GP2AP020A00F_RANGE_A_x32	0x05
124 #define GP2AP020A00F_RANGE_A_x64	0x06
125 #define GP2AP020A00F_RANGE_A_x128	0x07
126 
127 /* PS_REG bits */
128 #define GP2AP020A00F_ALC_MASK		0x80 /* Auto light cancel */
129 #define GP2AP020A00F_ALC_ON		0x80
130 #define GP2AP020A00F_ALC_OFF		0x00
131 #define GP2AP020A00F_INTTYPE_MASK	0x40 /* Interrupt type setting */
132 #define GP2AP020A00F_INTTYPE_LEVEL	0x00
133 #define GP2AP020A00F_INTTYPE_PULSE	0x40
134 #define GP2AP020A00F_RES_P_MASK		0x38 /* PS: Resolution */
135 #define GP2AP020A00F_RES_P_800ms_x2	0x00
136 #define GP2AP020A00F_RES_P_400ms_x2	0x08
137 #define GP2AP020A00F_RES_P_200ms_x2	0x10
138 #define GP2AP020A00F_RES_P_100ms_x2	0x18
139 #define GP2AP020A00F_RES_P_25ms_x2	0x20
140 #define GP2AP020A00F_RES_P_6_25ms_x2	0x28
141 #define GP2AP020A00F_RES_P_1_56ms_x2	0x30
142 #define GP2AP020A00F_RES_P_0_39ms_x2	0x38
143 #define GP2AP020A00F_RANGE_P_MASK	0x07 /* PS: Max measurable range */
144 #define GP2AP020A00F_RANGE_P_x1		0x00
145 #define GP2AP020A00F_RANGE_P_x2		0x01
146 #define GP2AP020A00F_RANGE_P_x4		0x02
147 #define GP2AP020A00F_RANGE_P_x8		0x03
148 #define GP2AP020A00F_RANGE_P_x16	0x04
149 #define GP2AP020A00F_RANGE_P_x32	0x05
150 #define GP2AP020A00F_RANGE_P_x64	0x06
151 #define GP2AP020A00F_RANGE_P_x128	0x07
152 
153 /* LED reg bits */
154 #define GP2AP020A00F_INTVAL_MASK	0xc0 /* Intermittent operating */
155 #define GP2AP020A00F_INTVAL_0		0x00
156 #define GP2AP020A00F_INTVAL_4		0x40
157 #define GP2AP020A00F_INTVAL_8		0x80
158 #define GP2AP020A00F_INTVAL_16		0xc0
159 #define GP2AP020A00F_IS_MASK		0x30 /* ILED drive peak current */
160 #define GP2AP020A00F_IS_13_8mA		0x00
161 #define GP2AP020A00F_IS_27_5mA		0x10
162 #define GP2AP020A00F_IS_55mA		0x20
163 #define GP2AP020A00F_IS_110mA		0x30
164 #define GP2AP020A00F_PIN_MASK		0x0c /* INT terminal setting */
165 #define GP2AP020A00F_PIN_ALS_OR_PS	0x00
166 #define GP2AP020A00F_PIN_ALS		0x04
167 #define GP2AP020A00F_PIN_PS		0x08
168 #define GP2AP020A00F_PIN_PS_DETECT	0x0c
169 #define GP2AP020A00F_FREQ_MASK		0x02 /* LED modulation frequency */
170 #define GP2AP020A00F_FREQ_327_5kHz	0x00
171 #define GP2AP020A00F_FREQ_81_8kHz	0x02
172 #define GP2AP020A00F_RST		0x01 /* Software reset */
173 
174 #define GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR	0
175 #define GP2AP020A00F_SCAN_MODE_LIGHT_IR		1
176 #define GP2AP020A00F_SCAN_MODE_PROXIMITY	2
177 #define GP2AP020A00F_CHAN_TIMESTAMP		3
178 
179 #define GP2AP020A00F_DATA_READY_TIMEOUT		msecs_to_jiffies(1000)
180 #define GP2AP020A00F_DATA_REG(chan)		(GP2AP020A00F_D0_L_REG + \
181 							(chan) * 2)
182 #define GP2AP020A00F_THRESH_REG(th_val_id)	(GP2AP020A00F_TL_L_REG + \
183 							(th_val_id) * 2)
184 #define GP2AP020A00F_THRESH_VAL_ID(reg_addr)	((reg_addr - 4) / 2)
185 
186 #define GP2AP020A00F_SUBTRACT_MODE	0
187 #define GP2AP020A00F_ADD_MODE		1
188 
189 #define GP2AP020A00F_MAX_CHANNELS	3
190 
191 enum gp2ap020a00f_opmode {
192 	GP2AP020A00F_OPMODE_READ_RAW_CLEAR,
193 	GP2AP020A00F_OPMODE_READ_RAW_IR,
194 	GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY,
195 	GP2AP020A00F_OPMODE_ALS,
196 	GP2AP020A00F_OPMODE_PS,
197 	GP2AP020A00F_OPMODE_ALS_AND_PS,
198 	GP2AP020A00F_OPMODE_PROX_DETECT,
199 	GP2AP020A00F_OPMODE_SHUTDOWN,
200 	GP2AP020A00F_NUM_OPMODES,
201 };
202 
203 enum gp2ap020a00f_cmd {
204 	GP2AP020A00F_CMD_READ_RAW_CLEAR,
205 	GP2AP020A00F_CMD_READ_RAW_IR,
206 	GP2AP020A00F_CMD_READ_RAW_PROXIMITY,
207 	GP2AP020A00F_CMD_TRIGGER_CLEAR_EN,
208 	GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS,
209 	GP2AP020A00F_CMD_TRIGGER_IR_EN,
210 	GP2AP020A00F_CMD_TRIGGER_IR_DIS,
211 	GP2AP020A00F_CMD_TRIGGER_PROX_EN,
212 	GP2AP020A00F_CMD_TRIGGER_PROX_DIS,
213 	GP2AP020A00F_CMD_ALS_HIGH_EV_EN,
214 	GP2AP020A00F_CMD_ALS_HIGH_EV_DIS,
215 	GP2AP020A00F_CMD_ALS_LOW_EV_EN,
216 	GP2AP020A00F_CMD_ALS_LOW_EV_DIS,
217 	GP2AP020A00F_CMD_PROX_HIGH_EV_EN,
218 	GP2AP020A00F_CMD_PROX_HIGH_EV_DIS,
219 	GP2AP020A00F_CMD_PROX_LOW_EV_EN,
220 	GP2AP020A00F_CMD_PROX_LOW_EV_DIS,
221 };
222 
223 enum gp2ap020a00f_flags {
224 	GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER,
225 	GP2AP020A00F_FLAG_ALS_IR_TRIGGER,
226 	GP2AP020A00F_FLAG_PROX_TRIGGER,
227 	GP2AP020A00F_FLAG_PROX_RISING_EV,
228 	GP2AP020A00F_FLAG_PROX_FALLING_EV,
229 	GP2AP020A00F_FLAG_ALS_RISING_EV,
230 	GP2AP020A00F_FLAG_ALS_FALLING_EV,
231 	GP2AP020A00F_FLAG_LUX_MODE_HI,
232 	GP2AP020A00F_FLAG_DATA_READY,
233 };
234 
235 enum gp2ap020a00f_thresh_val_id {
236 	GP2AP020A00F_THRESH_TL,
237 	GP2AP020A00F_THRESH_TH,
238 	GP2AP020A00F_THRESH_PL,
239 	GP2AP020A00F_THRESH_PH,
240 };
241 
242 struct gp2ap020a00f_data {
243 	const struct gp2ap020a00f_platform_data *pdata;
244 	struct i2c_client *client;
245 	struct mutex lock;
246 	char *buffer;
247 	struct regulator *vled_reg;
248 	unsigned long flags;
249 	enum gp2ap020a00f_opmode cur_opmode;
250 	struct iio_trigger *trig;
251 	struct regmap *regmap;
252 	unsigned int thresh_val[4];
253 	u8 debug_reg_addr;
254 	struct irq_work work;
255 	wait_queue_head_t data_ready_queue;
256 };
257 
258 static const u8 gp2ap020a00f_reg_init_tab[] = {
259 	[GP2AP020A00F_OP_REG] = GP2AP020A00F_OP3_SHUTDOWN,
260 	[GP2AP020A00F_ALS_REG] = GP2AP020A00F_RES_A_25ms |
261 				 GP2AP020A00F_RANGE_A_x8,
262 	[GP2AP020A00F_PS_REG] = GP2AP020A00F_ALC_ON |
263 				GP2AP020A00F_RES_P_1_56ms_x2 |
264 				GP2AP020A00F_RANGE_P_x4,
265 	[GP2AP020A00F_LED_REG] = GP2AP020A00F_INTVAL_0 |
266 				 GP2AP020A00F_IS_110mA |
267 				 GP2AP020A00F_FREQ_327_5kHz,
268 	[GP2AP020A00F_TL_L_REG] = 0,
269 	[GP2AP020A00F_TL_H_REG] = 0,
270 	[GP2AP020A00F_TH_L_REG] = 0,
271 	[GP2AP020A00F_TH_H_REG] = 0,
272 	[GP2AP020A00F_PL_L_REG] = 0,
273 	[GP2AP020A00F_PL_H_REG] = 0,
274 	[GP2AP020A00F_PH_L_REG] = 0,
275 	[GP2AP020A00F_PH_H_REG] = 0,
276 };
277 
278 static bool gp2ap020a00f_is_volatile_reg(struct device *dev, unsigned int reg)
279 {
280 	switch (reg) {
281 	case GP2AP020A00F_OP_REG:
282 	case GP2AP020A00F_D0_L_REG:
283 	case GP2AP020A00F_D0_H_REG:
284 	case GP2AP020A00F_D1_L_REG:
285 	case GP2AP020A00F_D1_H_REG:
286 	case GP2AP020A00F_D2_L_REG:
287 	case GP2AP020A00F_D2_H_REG:
288 		return true;
289 	default:
290 		return false;
291 	}
292 }
293 
294 static const struct regmap_config gp2ap020a00f_regmap_config = {
295 	.reg_bits = 8,
296 	.val_bits = 8,
297 
298 	.max_register = GP2AP020A00F_D2_H_REG,
299 	.cache_type = REGCACHE_RBTREE,
300 
301 	.volatile_reg = gp2ap020a00f_is_volatile_reg,
302 };
303 
304 static const struct gp2ap020a00f_mutable_config_regs {
305 	u8 op_reg;
306 	u8 als_reg;
307 	u8 ps_reg;
308 	u8 led_reg;
309 } opmode_regs_settings[GP2AP020A00F_NUM_OPMODES] = {
310 	[GP2AP020A00F_OPMODE_READ_RAW_CLEAR] = {
311 		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
312 		| GP2AP020A00F_OP3_OPERATION
313 		| GP2AP020A00F_TYPE_AUTO_CALC,
314 		GP2AP020A00F_PRST_ONCE,
315 		GP2AP020A00F_INTTYPE_LEVEL,
316 		GP2AP020A00F_PIN_ALS
317 	},
318 	[GP2AP020A00F_OPMODE_READ_RAW_IR] = {
319 		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
320 		| GP2AP020A00F_OP3_OPERATION
321 		| GP2AP020A00F_TYPE_MANUAL_CALC,
322 		GP2AP020A00F_PRST_ONCE,
323 		GP2AP020A00F_INTTYPE_LEVEL,
324 		GP2AP020A00F_PIN_ALS
325 	},
326 	[GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY] = {
327 		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
328 		| GP2AP020A00F_OP3_OPERATION
329 		| GP2AP020A00F_TYPE_MANUAL_CALC,
330 		GP2AP020A00F_PRST_ONCE,
331 		GP2AP020A00F_INTTYPE_LEVEL,
332 		GP2AP020A00F_PIN_PS
333 	},
334 	[GP2AP020A00F_OPMODE_PROX_DETECT] = {
335 		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
336 		| GP2AP020A00F_OP3_OPERATION
337 		| GP2AP020A00F_TYPE_MANUAL_CALC,
338 		GP2AP020A00F_PRST_4_CYCLES,
339 		GP2AP020A00F_INTTYPE_PULSE,
340 		GP2AP020A00F_PIN_PS_DETECT
341 	},
342 	[GP2AP020A00F_OPMODE_ALS] = {
343 		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
344 		| GP2AP020A00F_OP3_OPERATION
345 		| GP2AP020A00F_TYPE_AUTO_CALC,
346 		GP2AP020A00F_PRST_ONCE,
347 		GP2AP020A00F_INTTYPE_LEVEL,
348 		GP2AP020A00F_PIN_ALS
349 	},
350 	[GP2AP020A00F_OPMODE_PS] = {
351 		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
352 		| GP2AP020A00F_OP3_OPERATION
353 		| GP2AP020A00F_TYPE_MANUAL_CALC,
354 		GP2AP020A00F_PRST_4_CYCLES,
355 		GP2AP020A00F_INTTYPE_LEVEL,
356 		GP2AP020A00F_PIN_PS
357 	},
358 	[GP2AP020A00F_OPMODE_ALS_AND_PS] = {
359 		GP2AP020A00F_OP_ALS_AND_PS
360 		| GP2AP020A00F_OP2_CONT_OPERATION
361 		| GP2AP020A00F_OP3_OPERATION
362 		| GP2AP020A00F_TYPE_AUTO_CALC,
363 		GP2AP020A00F_PRST_4_CYCLES,
364 		GP2AP020A00F_INTTYPE_LEVEL,
365 		GP2AP020A00F_PIN_ALS_OR_PS
366 	},
367 	[GP2AP020A00F_OPMODE_SHUTDOWN] = { GP2AP020A00F_OP3_SHUTDOWN, },
368 };
369 
370 static int gp2ap020a00f_set_operation_mode(struct gp2ap020a00f_data *data,
371 					enum gp2ap020a00f_opmode op)
372 {
373 	unsigned int op_reg_val;
374 	int err;
375 
376 	if (op != GP2AP020A00F_OPMODE_SHUTDOWN) {
377 		err = regmap_read(data->regmap, GP2AP020A00F_OP_REG,
378 					&op_reg_val);
379 		if (err < 0)
380 			return err;
381 		/*
382 		 * Shutdown the device if the operation being executed entails
383 		 * mode transition.
384 		 */
385 		if ((opmode_regs_settings[op].op_reg & GP2AP020A00F_OP_MASK) !=
386 		    (op_reg_val & GP2AP020A00F_OP_MASK)) {
387 			/* set shutdown mode */
388 			err = regmap_update_bits(data->regmap,
389 				GP2AP020A00F_OP_REG, GP2AP020A00F_OP3_MASK,
390 				GP2AP020A00F_OP3_SHUTDOWN);
391 			if (err < 0)
392 				return err;
393 		}
394 
395 		err = regmap_update_bits(data->regmap, GP2AP020A00F_ALS_REG,
396 			GP2AP020A00F_PRST_MASK, opmode_regs_settings[op]
397 								.als_reg);
398 		if (err < 0)
399 			return err;
400 
401 		err = regmap_update_bits(data->regmap, GP2AP020A00F_PS_REG,
402 			GP2AP020A00F_INTTYPE_MASK, opmode_regs_settings[op]
403 								.ps_reg);
404 		if (err < 0)
405 			return err;
406 
407 		err = regmap_update_bits(data->regmap, GP2AP020A00F_LED_REG,
408 			GP2AP020A00F_PIN_MASK, opmode_regs_settings[op]
409 								.led_reg);
410 		if (err < 0)
411 			return err;
412 	}
413 
414 	/* Set OP_REG and apply operation mode (power on / off) */
415 	err = regmap_update_bits(data->regmap,
416 				 GP2AP020A00F_OP_REG,
417 				 GP2AP020A00F_OP_MASK | GP2AP020A00F_OP2_MASK |
418 				 GP2AP020A00F_OP3_MASK | GP2AP020A00F_TYPE_MASK,
419 				 opmode_regs_settings[op].op_reg);
420 	if (err < 0)
421 		return err;
422 
423 	data->cur_opmode = op;
424 
425 	return 0;
426 }
427 
428 static bool gp2ap020a00f_als_enabled(struct gp2ap020a00f_data *data)
429 {
430 	return test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags) ||
431 	       test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags) ||
432 	       test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags) ||
433 	       test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
434 }
435 
436 static bool gp2ap020a00f_prox_detect_enabled(struct gp2ap020a00f_data *data)
437 {
438 	return test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags) ||
439 	       test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
440 }
441 
442 static int gp2ap020a00f_write_event_threshold(struct gp2ap020a00f_data *data,
443 				enum gp2ap020a00f_thresh_val_id th_val_id,
444 				bool enable)
445 {
446 	__le16 thresh_buf = 0;
447 	unsigned int thresh_reg_val;
448 
449 	if (!enable)
450 		thresh_reg_val = 0;
451 	else if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags) &&
452 		 th_val_id != GP2AP020A00F_THRESH_PL &&
453 		 th_val_id != GP2AP020A00F_THRESH_PH)
454 		/*
455 		 * For the high lux mode ALS threshold has to be scaled down
456 		 * to allow for proper comparison with the output value.
457 		 */
458 		thresh_reg_val = data->thresh_val[th_val_id] / 16;
459 	else
460 		thresh_reg_val = data->thresh_val[th_val_id] > 16000 ?
461 					16000 :
462 					data->thresh_val[th_val_id];
463 
464 	thresh_buf = cpu_to_le16(thresh_reg_val);
465 
466 	return regmap_bulk_write(data->regmap,
467 				 GP2AP020A00F_THRESH_REG(th_val_id),
468 				 (u8 *)&thresh_buf, 2);
469 }
470 
471 static int gp2ap020a00f_alter_opmode(struct gp2ap020a00f_data *data,
472 			enum gp2ap020a00f_opmode diff_mode, int add_sub)
473 {
474 	enum gp2ap020a00f_opmode new_mode;
475 
476 	if (diff_mode != GP2AP020A00F_OPMODE_ALS &&
477 	    diff_mode != GP2AP020A00F_OPMODE_PS)
478 		return -EINVAL;
479 
480 	if (add_sub == GP2AP020A00F_ADD_MODE) {
481 		if (data->cur_opmode == GP2AP020A00F_OPMODE_SHUTDOWN)
482 			new_mode =  diff_mode;
483 		else
484 			new_mode = GP2AP020A00F_OPMODE_ALS_AND_PS;
485 	} else {
486 		if (data->cur_opmode == GP2AP020A00F_OPMODE_ALS_AND_PS)
487 			new_mode = (diff_mode == GP2AP020A00F_OPMODE_ALS) ?
488 					GP2AP020A00F_OPMODE_PS :
489 					GP2AP020A00F_OPMODE_ALS;
490 		else
491 			new_mode = GP2AP020A00F_OPMODE_SHUTDOWN;
492 	}
493 
494 	return gp2ap020a00f_set_operation_mode(data, new_mode);
495 }
496 
497 static int gp2ap020a00f_exec_cmd(struct gp2ap020a00f_data *data,
498 					enum gp2ap020a00f_cmd cmd)
499 {
500 	int err = 0;
501 
502 	switch (cmd) {
503 	case GP2AP020A00F_CMD_READ_RAW_CLEAR:
504 		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
505 			return -EBUSY;
506 		err = gp2ap020a00f_set_operation_mode(data,
507 					GP2AP020A00F_OPMODE_READ_RAW_CLEAR);
508 		break;
509 	case GP2AP020A00F_CMD_READ_RAW_IR:
510 		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
511 			return -EBUSY;
512 		err = gp2ap020a00f_set_operation_mode(data,
513 					GP2AP020A00F_OPMODE_READ_RAW_IR);
514 		break;
515 	case GP2AP020A00F_CMD_READ_RAW_PROXIMITY:
516 		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
517 			return -EBUSY;
518 		err = gp2ap020a00f_set_operation_mode(data,
519 					GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY);
520 		break;
521 	case GP2AP020A00F_CMD_TRIGGER_CLEAR_EN:
522 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
523 			return -EBUSY;
524 		if (!gp2ap020a00f_als_enabled(data))
525 			err = gp2ap020a00f_alter_opmode(data,
526 						GP2AP020A00F_OPMODE_ALS,
527 						GP2AP020A00F_ADD_MODE);
528 		set_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
529 		break;
530 	case GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS:
531 		clear_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
532 		if (gp2ap020a00f_als_enabled(data))
533 			break;
534 		err = gp2ap020a00f_alter_opmode(data,
535 						GP2AP020A00F_OPMODE_ALS,
536 						GP2AP020A00F_SUBTRACT_MODE);
537 		break;
538 	case GP2AP020A00F_CMD_TRIGGER_IR_EN:
539 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
540 			return -EBUSY;
541 		if (!gp2ap020a00f_als_enabled(data))
542 			err = gp2ap020a00f_alter_opmode(data,
543 						GP2AP020A00F_OPMODE_ALS,
544 						GP2AP020A00F_ADD_MODE);
545 		set_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
546 		break;
547 	case GP2AP020A00F_CMD_TRIGGER_IR_DIS:
548 		clear_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
549 		if (gp2ap020a00f_als_enabled(data))
550 			break;
551 		err = gp2ap020a00f_alter_opmode(data,
552 						GP2AP020A00F_OPMODE_ALS,
553 						GP2AP020A00F_SUBTRACT_MODE);
554 		break;
555 	case GP2AP020A00F_CMD_TRIGGER_PROX_EN:
556 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
557 			return -EBUSY;
558 		err = gp2ap020a00f_alter_opmode(data,
559 						GP2AP020A00F_OPMODE_PS,
560 						GP2AP020A00F_ADD_MODE);
561 		set_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
562 		break;
563 	case GP2AP020A00F_CMD_TRIGGER_PROX_DIS:
564 		clear_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
565 		err = gp2ap020a00f_alter_opmode(data,
566 						GP2AP020A00F_OPMODE_PS,
567 						GP2AP020A00F_SUBTRACT_MODE);
568 		break;
569 	case GP2AP020A00F_CMD_ALS_HIGH_EV_EN:
570 		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
571 			return 0;
572 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
573 			return -EBUSY;
574 		if (!gp2ap020a00f_als_enabled(data)) {
575 			err = gp2ap020a00f_alter_opmode(data,
576 						GP2AP020A00F_OPMODE_ALS,
577 						GP2AP020A00F_ADD_MODE);
578 			if (err < 0)
579 				return err;
580 		}
581 		set_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
582 		err =  gp2ap020a00f_write_event_threshold(data,
583 					GP2AP020A00F_THRESH_TH, true);
584 		break;
585 	case GP2AP020A00F_CMD_ALS_HIGH_EV_DIS:
586 		if (!test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
587 			return 0;
588 		clear_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
589 		if (!gp2ap020a00f_als_enabled(data)) {
590 			err = gp2ap020a00f_alter_opmode(data,
591 						GP2AP020A00F_OPMODE_ALS,
592 						GP2AP020A00F_SUBTRACT_MODE);
593 			if (err < 0)
594 				return err;
595 		}
596 		err =  gp2ap020a00f_write_event_threshold(data,
597 					GP2AP020A00F_THRESH_TH, false);
598 		break;
599 	case GP2AP020A00F_CMD_ALS_LOW_EV_EN:
600 		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
601 			return 0;
602 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
603 			return -EBUSY;
604 		if (!gp2ap020a00f_als_enabled(data)) {
605 			err = gp2ap020a00f_alter_opmode(data,
606 						GP2AP020A00F_OPMODE_ALS,
607 						GP2AP020A00F_ADD_MODE);
608 			if (err < 0)
609 				return err;
610 		}
611 		set_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
612 		err =  gp2ap020a00f_write_event_threshold(data,
613 					GP2AP020A00F_THRESH_TL, true);
614 		break;
615 	case GP2AP020A00F_CMD_ALS_LOW_EV_DIS:
616 		if (!test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
617 			return 0;
618 		clear_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
619 		if (!gp2ap020a00f_als_enabled(data)) {
620 			err = gp2ap020a00f_alter_opmode(data,
621 						GP2AP020A00F_OPMODE_ALS,
622 						GP2AP020A00F_SUBTRACT_MODE);
623 			if (err < 0)
624 				return err;
625 		}
626 		err =  gp2ap020a00f_write_event_threshold(data,
627 					GP2AP020A00F_THRESH_TL, false);
628 		break;
629 	case GP2AP020A00F_CMD_PROX_HIGH_EV_EN:
630 		if (test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
631 			return 0;
632 		if (gp2ap020a00f_als_enabled(data) ||
633 		    data->cur_opmode == GP2AP020A00F_OPMODE_PS)
634 			return -EBUSY;
635 		if (!gp2ap020a00f_prox_detect_enabled(data)) {
636 			err = gp2ap020a00f_set_operation_mode(data,
637 					GP2AP020A00F_OPMODE_PROX_DETECT);
638 			if (err < 0)
639 				return err;
640 		}
641 		set_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
642 		err =  gp2ap020a00f_write_event_threshold(data,
643 					GP2AP020A00F_THRESH_PH, true);
644 		break;
645 	case GP2AP020A00F_CMD_PROX_HIGH_EV_DIS:
646 		if (!test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
647 			return 0;
648 		clear_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
649 		err = gp2ap020a00f_set_operation_mode(data,
650 					GP2AP020A00F_OPMODE_SHUTDOWN);
651 		if (err < 0)
652 			return err;
653 		err =  gp2ap020a00f_write_event_threshold(data,
654 					GP2AP020A00F_THRESH_PH, false);
655 		break;
656 	case GP2AP020A00F_CMD_PROX_LOW_EV_EN:
657 		if (test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
658 			return 0;
659 		if (gp2ap020a00f_als_enabled(data) ||
660 		    data->cur_opmode == GP2AP020A00F_OPMODE_PS)
661 			return -EBUSY;
662 		if (!gp2ap020a00f_prox_detect_enabled(data)) {
663 			err = gp2ap020a00f_set_operation_mode(data,
664 					GP2AP020A00F_OPMODE_PROX_DETECT);
665 			if (err < 0)
666 				return err;
667 		}
668 		set_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
669 		err =  gp2ap020a00f_write_event_threshold(data,
670 					GP2AP020A00F_THRESH_PL, true);
671 		break;
672 	case GP2AP020A00F_CMD_PROX_LOW_EV_DIS:
673 		if (!test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
674 			return 0;
675 		clear_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
676 		err = gp2ap020a00f_set_operation_mode(data,
677 					GP2AP020A00F_OPMODE_SHUTDOWN);
678 		if (err < 0)
679 			return err;
680 		err =  gp2ap020a00f_write_event_threshold(data,
681 					GP2AP020A00F_THRESH_PL, false);
682 		break;
683 	}
684 
685 	return err;
686 }
687 
688 static int wait_conversion_complete_irq(struct gp2ap020a00f_data *data)
689 {
690 	int ret;
691 
692 	ret = wait_event_timeout(data->data_ready_queue,
693 				 test_bit(GP2AP020A00F_FLAG_DATA_READY,
694 					  &data->flags),
695 				 GP2AP020A00F_DATA_READY_TIMEOUT);
696 	clear_bit(GP2AP020A00F_FLAG_DATA_READY, &data->flags);
697 
698 	return ret > 0 ? 0 : -ETIME;
699 }
700 
701 static int gp2ap020a00f_read_output(struct gp2ap020a00f_data *data,
702 					unsigned int output_reg, int *val)
703 {
704 	u8 reg_buf[2];
705 	int err;
706 
707 	err = wait_conversion_complete_irq(data);
708 	if (err < 0)
709 		dev_dbg(&data->client->dev, "data ready timeout\n");
710 
711 	err = regmap_bulk_read(data->regmap, output_reg, reg_buf, 2);
712 	if (err < 0)
713 		return err;
714 
715 	*val = le16_to_cpup((__le16 *)reg_buf);
716 
717 	return err;
718 }
719 
720 static bool gp2ap020a00f_adjust_lux_mode(struct gp2ap020a00f_data *data,
721 				 int output_val)
722 {
723 	u8 new_range = 0xff;
724 	int err;
725 
726 	if (!test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags)) {
727 		if (output_val > 16000) {
728 			set_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
729 			new_range = GP2AP020A00F_RANGE_A_x128;
730 		}
731 	} else {
732 		if (output_val < 1000) {
733 			clear_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
734 			new_range = GP2AP020A00F_RANGE_A_x8;
735 		}
736 	}
737 
738 	if (new_range != 0xff) {
739 		/* Clear als threshold registers to avoid spurious
740 		 * events caused by lux mode transition.
741 		 */
742 		err =  gp2ap020a00f_write_event_threshold(data,
743 					GP2AP020A00F_THRESH_TH, false);
744 		if (err < 0) {
745 			dev_err(&data->client->dev,
746 				"Clearing als threshold register failed.\n");
747 			return false;
748 		}
749 
750 		err =  gp2ap020a00f_write_event_threshold(data,
751 					GP2AP020A00F_THRESH_TL, false);
752 		if (err < 0) {
753 			dev_err(&data->client->dev,
754 				"Clearing als threshold register failed.\n");
755 			return false;
756 		}
757 
758 		/* Change lux mode */
759 		err = regmap_update_bits(data->regmap,
760 			GP2AP020A00F_OP_REG,
761 			GP2AP020A00F_OP3_MASK,
762 			GP2AP020A00F_OP3_SHUTDOWN);
763 
764 		if (err < 0) {
765 			dev_err(&data->client->dev,
766 				"Shutting down the device failed.\n");
767 			return false;
768 		}
769 
770 		err = regmap_update_bits(data->regmap,
771 			GP2AP020A00F_ALS_REG,
772 			GP2AP020A00F_RANGE_A_MASK,
773 			new_range);
774 
775 		if (err < 0) {
776 			dev_err(&data->client->dev,
777 				"Adjusting device lux mode failed.\n");
778 			return false;
779 		}
780 
781 		err = regmap_update_bits(data->regmap,
782 			GP2AP020A00F_OP_REG,
783 			GP2AP020A00F_OP3_MASK,
784 			GP2AP020A00F_OP3_OPERATION);
785 
786 		if (err < 0) {
787 			dev_err(&data->client->dev,
788 				"Powering up the device failed.\n");
789 			return false;
790 		}
791 
792 		/* Adjust als threshold register values to the new lux mode */
793 		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) {
794 			err =  gp2ap020a00f_write_event_threshold(data,
795 					GP2AP020A00F_THRESH_TH, true);
796 			if (err < 0) {
797 				dev_err(&data->client->dev,
798 				"Adjusting als threshold value failed.\n");
799 				return false;
800 			}
801 		}
802 
803 		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) {
804 			err =  gp2ap020a00f_write_event_threshold(data,
805 					GP2AP020A00F_THRESH_TL, true);
806 			if (err < 0) {
807 				dev_err(&data->client->dev,
808 				"Adjusting als threshold value failed.\n");
809 				return false;
810 			}
811 		}
812 
813 		return true;
814 	}
815 
816 	return false;
817 }
818 
819 static void gp2ap020a00f_output_to_lux(struct gp2ap020a00f_data *data,
820 						int *output_val)
821 {
822 	if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags))
823 		*output_val *= 16;
824 }
825 
826 static void gp2ap020a00f_iio_trigger_work(struct irq_work *work)
827 {
828 	struct gp2ap020a00f_data *data =
829 		container_of(work, struct gp2ap020a00f_data, work);
830 
831 	iio_trigger_poll(data->trig);
832 }
833 
834 static irqreturn_t gp2ap020a00f_prox_sensing_handler(int irq, void *data)
835 {
836 	struct iio_dev *indio_dev = data;
837 	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
838 	unsigned int op_reg_val;
839 	int ret;
840 
841 	/* Read interrupt flags */
842 	ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG, &op_reg_val);
843 	if (ret < 0)
844 		return IRQ_HANDLED;
845 
846 	if (gp2ap020a00f_prox_detect_enabled(priv)) {
847 		if (op_reg_val & GP2AP020A00F_PROX_DETECT) {
848 			iio_push_event(indio_dev,
849 			       IIO_UNMOD_EVENT_CODE(
850 				    IIO_PROXIMITY,
851 				    GP2AP020A00F_SCAN_MODE_PROXIMITY,
852 				    IIO_EV_TYPE_ROC,
853 				    IIO_EV_DIR_RISING),
854 			       iio_get_time_ns());
855 		} else {
856 			iio_push_event(indio_dev,
857 			       IIO_UNMOD_EVENT_CODE(
858 				    IIO_PROXIMITY,
859 				    GP2AP020A00F_SCAN_MODE_PROXIMITY,
860 				    IIO_EV_TYPE_ROC,
861 				    IIO_EV_DIR_FALLING),
862 			       iio_get_time_ns());
863 		}
864 	}
865 
866 	return IRQ_HANDLED;
867 }
868 
869 static irqreturn_t gp2ap020a00f_thresh_event_handler(int irq, void *data)
870 {
871 	struct iio_dev *indio_dev = data;
872 	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
873 	u8 op_reg_flags, d0_reg_buf[2];
874 	unsigned int output_val, op_reg_val;
875 	int thresh_val_id, ret;
876 
877 	/* Read interrupt flags */
878 	ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG,
879 							&op_reg_val);
880 	if (ret < 0)
881 		goto done;
882 
883 	op_reg_flags = op_reg_val & (GP2AP020A00F_FLAG_A | GP2AP020A00F_FLAG_P
884 					| GP2AP020A00F_PROX_DETECT);
885 
886 	op_reg_val &= (~GP2AP020A00F_FLAG_A & ~GP2AP020A00F_FLAG_P
887 					& ~GP2AP020A00F_PROX_DETECT);
888 
889 	/* Clear interrupt flags (if not in INTTYPE_PULSE mode) */
890 	if (priv->cur_opmode != GP2AP020A00F_OPMODE_PROX_DETECT) {
891 		ret = regmap_write(priv->regmap, GP2AP020A00F_OP_REG,
892 								op_reg_val);
893 		if (ret < 0)
894 			goto done;
895 	}
896 
897 	if (op_reg_flags & GP2AP020A00F_FLAG_A) {
898 		/* Check D0 register to assess if the lux mode
899 		 * transition is required.
900 		 */
901 		ret = regmap_bulk_read(priv->regmap, GP2AP020A00F_D0_L_REG,
902 							d0_reg_buf, 2);
903 		if (ret < 0)
904 			goto done;
905 
906 		output_val = le16_to_cpup((__le16 *)d0_reg_buf);
907 
908 		if (gp2ap020a00f_adjust_lux_mode(priv, output_val))
909 			goto done;
910 
911 		gp2ap020a00f_output_to_lux(priv, &output_val);
912 
913 		/*
914 		 * We need to check output value to distinguish
915 		 * between high and low ambient light threshold event.
916 		 */
917 		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &priv->flags)) {
918 			thresh_val_id =
919 			    GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TH_L_REG);
920 			if (output_val > priv->thresh_val[thresh_val_id])
921 				iio_push_event(indio_dev,
922 				       IIO_MOD_EVENT_CODE(
923 					    IIO_LIGHT,
924 					    GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
925 					    IIO_MOD_LIGHT_CLEAR,
926 					    IIO_EV_TYPE_THRESH,
927 					    IIO_EV_DIR_RISING),
928 				       iio_get_time_ns());
929 		}
930 
931 		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &priv->flags)) {
932 			thresh_val_id =
933 			    GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TL_L_REG);
934 			if (output_val < priv->thresh_val[thresh_val_id])
935 				iio_push_event(indio_dev,
936 				       IIO_MOD_EVENT_CODE(
937 					    IIO_LIGHT,
938 					    GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
939 					    IIO_MOD_LIGHT_CLEAR,
940 					    IIO_EV_TYPE_THRESH,
941 					    IIO_EV_DIR_FALLING),
942 				       iio_get_time_ns());
943 		}
944 	}
945 
946 	if (priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_CLEAR ||
947 	    priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_IR ||
948 	    priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY) {
949 		set_bit(GP2AP020A00F_FLAG_DATA_READY, &priv->flags);
950 		wake_up(&priv->data_ready_queue);
951 		goto done;
952 	}
953 
954 	if (test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &priv->flags) ||
955 	    test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &priv->flags) ||
956 	    test_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &priv->flags))
957 		/* This fires off the trigger. */
958 		irq_work_queue(&priv->work);
959 
960 done:
961 	return IRQ_HANDLED;
962 }
963 
964 static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data)
965 {
966 	struct iio_poll_func *pf = data;
967 	struct iio_dev *indio_dev = pf->indio_dev;
968 	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
969 	size_t d_size = 0;
970 	int i, out_val, ret;
971 
972 	for_each_set_bit(i, indio_dev->active_scan_mask,
973 		indio_dev->masklength) {
974 		ret = regmap_bulk_read(priv->regmap,
975 				GP2AP020A00F_DATA_REG(i),
976 				&priv->buffer[d_size], 2);
977 		if (ret < 0)
978 			goto done;
979 
980 		if (i == GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR ||
981 		    i == GP2AP020A00F_SCAN_MODE_LIGHT_IR) {
982 			out_val = le16_to_cpup((__le16 *)&priv->buffer[d_size]);
983 			gp2ap020a00f_output_to_lux(priv, &out_val);
984 
985 			put_unaligned_le32(out_val, &priv->buffer[d_size]);
986 			d_size += 4;
987 		} else {
988 			d_size += 2;
989 		}
990 	}
991 
992 	iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer,
993 		pf->timestamp);
994 done:
995 	iio_trigger_notify_done(indio_dev->trig);
996 
997 	return IRQ_HANDLED;
998 }
999 
1000 static u8 gp2ap020a00f_get_thresh_reg(const struct iio_chan_spec *chan,
1001 					     enum iio_event_direction event_dir)
1002 {
1003 	switch (chan->type) {
1004 	case IIO_PROXIMITY:
1005 		if (event_dir == IIO_EV_DIR_RISING)
1006 			return GP2AP020A00F_PH_L_REG;
1007 		else
1008 			return GP2AP020A00F_PL_L_REG;
1009 	case IIO_LIGHT:
1010 		if (event_dir == IIO_EV_DIR_RISING)
1011 			return GP2AP020A00F_TH_L_REG;
1012 		else
1013 			return GP2AP020A00F_TL_L_REG;
1014 	default:
1015 		break;
1016 	}
1017 
1018 	return -EINVAL;
1019 }
1020 
1021 static int gp2ap020a00f_write_event_val(struct iio_dev *indio_dev,
1022 					const struct iio_chan_spec *chan,
1023 					enum iio_event_type type,
1024 					enum iio_event_direction dir,
1025 					enum iio_event_info info,
1026 					int val, int val2)
1027 {
1028 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1029 	bool event_en = false;
1030 	u8 thresh_val_id;
1031 	u8 thresh_reg_l;
1032 	int err = 0;
1033 
1034 	mutex_lock(&data->lock);
1035 
1036 	thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
1037 	thresh_val_id = GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l);
1038 
1039 	if (thresh_val_id > GP2AP020A00F_THRESH_PH) {
1040 		err = -EINVAL;
1041 		goto error_unlock;
1042 	}
1043 
1044 	switch (thresh_reg_l) {
1045 	case GP2AP020A00F_TH_L_REG:
1046 		event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
1047 							&data->flags);
1048 		break;
1049 	case GP2AP020A00F_TL_L_REG:
1050 		event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
1051 							&data->flags);
1052 		break;
1053 	case GP2AP020A00F_PH_L_REG:
1054 		if (val == 0) {
1055 			err = -EINVAL;
1056 			goto error_unlock;
1057 		}
1058 		event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
1059 							&data->flags);
1060 		break;
1061 	case GP2AP020A00F_PL_L_REG:
1062 		if (val == 0) {
1063 			err = -EINVAL;
1064 			goto error_unlock;
1065 		}
1066 		event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
1067 							&data->flags);
1068 		break;
1069 	}
1070 
1071 	data->thresh_val[thresh_val_id] = val;
1072 	err =  gp2ap020a00f_write_event_threshold(data, thresh_val_id,
1073 							event_en);
1074 error_unlock:
1075 	mutex_unlock(&data->lock);
1076 
1077 	return err;
1078 }
1079 
1080 static int gp2ap020a00f_read_event_val(struct iio_dev *indio_dev,
1081 				       const struct iio_chan_spec *chan,
1082 				       enum iio_event_type type,
1083 				       enum iio_event_direction dir,
1084 				       enum iio_event_info info,
1085 				       int *val, int *val2)
1086 {
1087 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1088 	u8 thresh_reg_l;
1089 	int err = IIO_VAL_INT;
1090 
1091 	mutex_lock(&data->lock);
1092 
1093 	thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
1094 
1095 	if (thresh_reg_l > GP2AP020A00F_PH_L_REG) {
1096 		err = -EINVAL;
1097 		goto error_unlock;
1098 	}
1099 
1100 	*val = data->thresh_val[GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l)];
1101 
1102 error_unlock:
1103 	mutex_unlock(&data->lock);
1104 
1105 	return err;
1106 }
1107 
1108 static int gp2ap020a00f_write_prox_event_config(struct iio_dev *indio_dev,
1109 						int state)
1110 {
1111 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1112 	enum gp2ap020a00f_cmd cmd_high_ev, cmd_low_ev;
1113 	int err;
1114 
1115 	cmd_high_ev = state ? GP2AP020A00F_CMD_PROX_HIGH_EV_EN :
1116 			      GP2AP020A00F_CMD_PROX_HIGH_EV_DIS;
1117 	cmd_low_ev = state ? GP2AP020A00F_CMD_PROX_LOW_EV_EN :
1118 			     GP2AP020A00F_CMD_PROX_LOW_EV_DIS;
1119 
1120 	/*
1121 	 * In order to enable proximity detection feature in the device
1122 	 * both high and low threshold registers have to be written
1123 	 * with different values, greater than zero.
1124 	 */
1125 	if (state) {
1126 		if (data->thresh_val[GP2AP020A00F_THRESH_PL] == 0)
1127 			return -EINVAL;
1128 
1129 		if (data->thresh_val[GP2AP020A00F_THRESH_PH] == 0)
1130 			return -EINVAL;
1131 	}
1132 
1133 	err = gp2ap020a00f_exec_cmd(data, cmd_high_ev);
1134 	if (err < 0)
1135 		return err;
1136 
1137 	err = gp2ap020a00f_exec_cmd(data, cmd_low_ev);
1138 	if (err < 0)
1139 		return err;
1140 
1141 	free_irq(data->client->irq, indio_dev);
1142 
1143 	if (state)
1144 		err = request_threaded_irq(data->client->irq, NULL,
1145 					   &gp2ap020a00f_prox_sensing_handler,
1146 					   IRQF_TRIGGER_RISING |
1147 					   IRQF_TRIGGER_FALLING |
1148 					   IRQF_ONESHOT,
1149 					   "gp2ap020a00f_prox_sensing",
1150 					   indio_dev);
1151 	else {
1152 		err = request_threaded_irq(data->client->irq, NULL,
1153 					   &gp2ap020a00f_thresh_event_handler,
1154 					   IRQF_TRIGGER_FALLING |
1155 					   IRQF_ONESHOT,
1156 					   "gp2ap020a00f_thresh_event",
1157 					   indio_dev);
1158 	}
1159 
1160 	return err;
1161 }
1162 
1163 static int gp2ap020a00f_write_event_config(struct iio_dev *indio_dev,
1164 					   const struct iio_chan_spec *chan,
1165 					   enum iio_event_type type,
1166 					   enum iio_event_direction dir,
1167 					   int state)
1168 {
1169 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1170 	enum gp2ap020a00f_cmd cmd;
1171 	int err;
1172 
1173 	mutex_lock(&data->lock);
1174 
1175 	switch (chan->type) {
1176 	case IIO_PROXIMITY:
1177 		err = gp2ap020a00f_write_prox_event_config(indio_dev, state);
1178 		break;
1179 	case IIO_LIGHT:
1180 		if (dir == IIO_EV_DIR_RISING) {
1181 			cmd = state ? GP2AP020A00F_CMD_ALS_HIGH_EV_EN :
1182 				      GP2AP020A00F_CMD_ALS_HIGH_EV_DIS;
1183 			err = gp2ap020a00f_exec_cmd(data, cmd);
1184 		} else {
1185 			cmd = state ? GP2AP020A00F_CMD_ALS_LOW_EV_EN :
1186 				      GP2AP020A00F_CMD_ALS_LOW_EV_DIS;
1187 			err = gp2ap020a00f_exec_cmd(data, cmd);
1188 		}
1189 		break;
1190 	default:
1191 		err = -EINVAL;
1192 	}
1193 
1194 	mutex_unlock(&data->lock);
1195 
1196 	return err;
1197 }
1198 
1199 static int gp2ap020a00f_read_event_config(struct iio_dev *indio_dev,
1200 					   const struct iio_chan_spec *chan,
1201 					   enum iio_event_type type,
1202 					   enum iio_event_direction dir)
1203 {
1204 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1205 	int event_en = 0;
1206 
1207 	mutex_lock(&data->lock);
1208 
1209 	switch (chan->type) {
1210 	case IIO_PROXIMITY:
1211 		if (dir == IIO_EV_DIR_RISING)
1212 			event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
1213 								&data->flags);
1214 		else
1215 			event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
1216 								&data->flags);
1217 		break;
1218 	case IIO_LIGHT:
1219 		if (dir == IIO_EV_DIR_RISING)
1220 			event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
1221 								&data->flags);
1222 		else
1223 			event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
1224 								&data->flags);
1225 		break;
1226 	default:
1227 		event_en = -EINVAL;
1228 		break;
1229 	}
1230 
1231 	mutex_unlock(&data->lock);
1232 
1233 	return event_en;
1234 }
1235 
1236 static int gp2ap020a00f_read_channel(struct gp2ap020a00f_data *data,
1237 				struct iio_chan_spec const *chan, int *val)
1238 {
1239 	enum gp2ap020a00f_cmd cmd;
1240 	int err;
1241 
1242 	switch (chan->scan_index) {
1243 	case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
1244 		cmd = GP2AP020A00F_CMD_READ_RAW_CLEAR;
1245 		break;
1246 	case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
1247 		cmd = GP2AP020A00F_CMD_READ_RAW_IR;
1248 		break;
1249 	case GP2AP020A00F_SCAN_MODE_PROXIMITY:
1250 		cmd = GP2AP020A00F_CMD_READ_RAW_PROXIMITY;
1251 		break;
1252 	default:
1253 		return -EINVAL;
1254 	}
1255 
1256 	err = gp2ap020a00f_exec_cmd(data, cmd);
1257 	if (err < 0) {
1258 		dev_err(&data->client->dev,
1259 			"gp2ap020a00f_exec_cmd failed\n");
1260 		goto error_ret;
1261 	}
1262 
1263 	err = gp2ap020a00f_read_output(data, chan->address, val);
1264 	if (err < 0)
1265 		dev_err(&data->client->dev,
1266 			"gp2ap020a00f_read_output failed\n");
1267 
1268 	err = gp2ap020a00f_set_operation_mode(data,
1269 					GP2AP020A00F_OPMODE_SHUTDOWN);
1270 	if (err < 0)
1271 		dev_err(&data->client->dev,
1272 			"Failed to shut down the device.\n");
1273 
1274 	if (cmd == GP2AP020A00F_CMD_READ_RAW_CLEAR ||
1275 	    cmd == GP2AP020A00F_CMD_READ_RAW_IR)
1276 		gp2ap020a00f_output_to_lux(data, val);
1277 
1278 error_ret:
1279 	return err;
1280 }
1281 
1282 static int gp2ap020a00f_read_raw(struct iio_dev *indio_dev,
1283 			   struct iio_chan_spec const *chan,
1284 			   int *val, int *val2,
1285 			   long mask)
1286 {
1287 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1288 	int err = -EINVAL;
1289 
1290 	mutex_lock(&data->lock);
1291 
1292 	switch (mask) {
1293 	case IIO_CHAN_INFO_RAW:
1294 		if (iio_buffer_enabled(indio_dev)) {
1295 			err = -EBUSY;
1296 			goto error_unlock;
1297 		}
1298 
1299 		err = gp2ap020a00f_read_channel(data, chan, val);
1300 		break;
1301 	}
1302 
1303 error_unlock:
1304 	mutex_unlock(&data->lock);
1305 
1306 	return err < 0 ? err : IIO_VAL_INT;
1307 }
1308 
1309 static const struct iio_event_spec gp2ap020a00f_event_spec_light[] = {
1310 	{
1311 		.type = IIO_EV_TYPE_THRESH,
1312 		.dir = IIO_EV_DIR_RISING,
1313 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
1314 			BIT(IIO_EV_INFO_ENABLE),
1315 	}, {
1316 		.type = IIO_EV_TYPE_THRESH,
1317 		.dir = IIO_EV_DIR_FALLING,
1318 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
1319 			BIT(IIO_EV_INFO_ENABLE),
1320 	},
1321 };
1322 
1323 static const struct iio_event_spec gp2ap020a00f_event_spec_prox[] = {
1324 	{
1325 		.type = IIO_EV_TYPE_ROC,
1326 		.dir = IIO_EV_DIR_RISING,
1327 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
1328 			BIT(IIO_EV_INFO_ENABLE),
1329 	}, {
1330 		.type = IIO_EV_TYPE_ROC,
1331 		.dir = IIO_EV_DIR_FALLING,
1332 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
1333 			BIT(IIO_EV_INFO_ENABLE),
1334 	},
1335 };
1336 
1337 static const struct iio_chan_spec gp2ap020a00f_channels[] = {
1338 	{
1339 		.type = IIO_LIGHT,
1340 		.channel2 = IIO_MOD_LIGHT_CLEAR,
1341 		.modified = 1,
1342 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
1343 		.scan_type = {
1344 			.sign = 'u',
1345 			.realbits = 24,
1346 			.shift = 0,
1347 			.storagebits = 32,
1348 			.endianness = IIO_LE,
1349 		},
1350 		.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
1351 		.address = GP2AP020A00F_D0_L_REG,
1352 		.event_spec = gp2ap020a00f_event_spec_light,
1353 		.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_light),
1354 	},
1355 	{
1356 		.type = IIO_LIGHT,
1357 		.channel2 = IIO_MOD_LIGHT_IR,
1358 		.modified = 1,
1359 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
1360 		.scan_type = {
1361 			.sign = 'u',
1362 			.realbits = 24,
1363 			.shift = 0,
1364 			.storagebits = 32,
1365 			.endianness = IIO_LE,
1366 		},
1367 		.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_IR,
1368 		.address = GP2AP020A00F_D1_L_REG,
1369 	},
1370 	{
1371 		.type = IIO_PROXIMITY,
1372 		.modified = 0,
1373 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
1374 		.scan_type = {
1375 			.sign = 'u',
1376 			.realbits = 16,
1377 			.shift = 0,
1378 			.storagebits = 16,
1379 			.endianness = IIO_LE,
1380 		},
1381 		.scan_index = GP2AP020A00F_SCAN_MODE_PROXIMITY,
1382 		.address = GP2AP020A00F_D2_L_REG,
1383 		.event_spec = gp2ap020a00f_event_spec_prox,
1384 		.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_prox),
1385 	},
1386 	IIO_CHAN_SOFT_TIMESTAMP(GP2AP020A00F_CHAN_TIMESTAMP),
1387 };
1388 
1389 static const struct iio_info gp2ap020a00f_info = {
1390 	.read_raw = &gp2ap020a00f_read_raw,
1391 	.read_event_value = &gp2ap020a00f_read_event_val,
1392 	.read_event_config = &gp2ap020a00f_read_event_config,
1393 	.write_event_value = &gp2ap020a00f_write_event_val,
1394 	.write_event_config = &gp2ap020a00f_write_event_config,
1395 	.driver_module = THIS_MODULE,
1396 };
1397 
1398 static int gp2ap020a00f_buffer_postenable(struct iio_dev *indio_dev)
1399 {
1400 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1401 	int i, err = 0;
1402 
1403 	mutex_lock(&data->lock);
1404 
1405 	/*
1406 	 * Enable triggers according to the scan_mask. Enabling either
1407 	 * LIGHT_CLEAR or LIGHT_IR scan mode results in enabling ALS
1408 	 * module in the device, which generates samples in both D0 (clear)
1409 	 * and D1 (ir) registers. As the two registers are bound to the
1410 	 * two separate IIO channels they are treated in the driver logic
1411 	 * as if they were controlled independently.
1412 	 */
1413 	for_each_set_bit(i, indio_dev->active_scan_mask,
1414 		indio_dev->masklength) {
1415 		switch (i) {
1416 		case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
1417 			err = gp2ap020a00f_exec_cmd(data,
1418 					GP2AP020A00F_CMD_TRIGGER_CLEAR_EN);
1419 			break;
1420 		case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
1421 			err = gp2ap020a00f_exec_cmd(data,
1422 					GP2AP020A00F_CMD_TRIGGER_IR_EN);
1423 			break;
1424 		case GP2AP020A00F_SCAN_MODE_PROXIMITY:
1425 			err = gp2ap020a00f_exec_cmd(data,
1426 					GP2AP020A00F_CMD_TRIGGER_PROX_EN);
1427 			break;
1428 		}
1429 	}
1430 
1431 	if (err < 0)
1432 		goto error_unlock;
1433 
1434 	data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
1435 	if (!data->buffer) {
1436 		err = -ENOMEM;
1437 		goto error_unlock;
1438 	}
1439 
1440 	err = iio_triggered_buffer_postenable(indio_dev);
1441 
1442 error_unlock:
1443 	mutex_unlock(&data->lock);
1444 
1445 	return err;
1446 }
1447 
1448 static int gp2ap020a00f_buffer_predisable(struct iio_dev *indio_dev)
1449 {
1450 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1451 	int i, err;
1452 
1453 	mutex_lock(&data->lock);
1454 
1455 	err = iio_triggered_buffer_predisable(indio_dev);
1456 	if (err < 0)
1457 		goto error_unlock;
1458 
1459 	for_each_set_bit(i, indio_dev->active_scan_mask,
1460 		indio_dev->masklength) {
1461 		switch (i) {
1462 		case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
1463 			err = gp2ap020a00f_exec_cmd(data,
1464 					GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS);
1465 			break;
1466 		case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
1467 			err = gp2ap020a00f_exec_cmd(data,
1468 					GP2AP020A00F_CMD_TRIGGER_IR_DIS);
1469 			break;
1470 		case GP2AP020A00F_SCAN_MODE_PROXIMITY:
1471 			err = gp2ap020a00f_exec_cmd(data,
1472 					GP2AP020A00F_CMD_TRIGGER_PROX_DIS);
1473 			break;
1474 		}
1475 	}
1476 
1477 	if (err == 0)
1478 		kfree(data->buffer);
1479 
1480 error_unlock:
1481 	mutex_unlock(&data->lock);
1482 
1483 	return err;
1484 }
1485 
1486 static const struct iio_buffer_setup_ops gp2ap020a00f_buffer_setup_ops = {
1487 	.postenable = &gp2ap020a00f_buffer_postenable,
1488 	.predisable = &gp2ap020a00f_buffer_predisable,
1489 };
1490 
1491 static const struct iio_trigger_ops gp2ap020a00f_trigger_ops = {
1492 	.owner = THIS_MODULE,
1493 };
1494 
1495 static int gp2ap020a00f_probe(struct i2c_client *client,
1496 				const struct i2c_device_id *id)
1497 {
1498 	struct gp2ap020a00f_data *data;
1499 	struct iio_dev *indio_dev;
1500 	struct regmap *regmap;
1501 	int err;
1502 
1503 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
1504 	if (!indio_dev)
1505 		return -ENOMEM;
1506 
1507 	data = iio_priv(indio_dev);
1508 
1509 	data->vled_reg = devm_regulator_get(&client->dev, "vled");
1510 	if (IS_ERR(data->vled_reg))
1511 		return PTR_ERR(data->vled_reg);
1512 
1513 	err = regulator_enable(data->vled_reg);
1514 	if (err)
1515 		return err;
1516 
1517 	regmap = devm_regmap_init_i2c(client, &gp2ap020a00f_regmap_config);
1518 	if (IS_ERR(regmap)) {
1519 		dev_err(&client->dev, "Regmap initialization failed.\n");
1520 		err = PTR_ERR(regmap);
1521 		goto error_regulator_disable;
1522 	}
1523 
1524 	/* Initialize device registers */
1525 	err = regmap_bulk_write(regmap, GP2AP020A00F_OP_REG,
1526 			gp2ap020a00f_reg_init_tab,
1527 			ARRAY_SIZE(gp2ap020a00f_reg_init_tab));
1528 
1529 	if (err < 0) {
1530 		dev_err(&client->dev, "Device initialization failed.\n");
1531 		goto error_regulator_disable;
1532 	}
1533 
1534 	i2c_set_clientdata(client, indio_dev);
1535 
1536 	data->client = client;
1537 	data->cur_opmode = GP2AP020A00F_OPMODE_SHUTDOWN;
1538 	data->regmap = regmap;
1539 	init_waitqueue_head(&data->data_ready_queue);
1540 
1541 	mutex_init(&data->lock);
1542 	indio_dev->dev.parent = &client->dev;
1543 	indio_dev->channels = gp2ap020a00f_channels;
1544 	indio_dev->num_channels = ARRAY_SIZE(gp2ap020a00f_channels);
1545 	indio_dev->info = &gp2ap020a00f_info;
1546 	indio_dev->name = id->name;
1547 	indio_dev->modes = INDIO_DIRECT_MODE;
1548 
1549 	/* Allocate buffer */
1550 	err = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
1551 		&gp2ap020a00f_trigger_handler, &gp2ap020a00f_buffer_setup_ops);
1552 	if (err < 0)
1553 		goto error_regulator_disable;
1554 
1555 	/* Allocate trigger */
1556 	data->trig = devm_iio_trigger_alloc(&client->dev, "%s-trigger",
1557 							indio_dev->name);
1558 	if (data->trig == NULL) {
1559 		err = -ENOMEM;
1560 		dev_err(&indio_dev->dev, "Failed to allocate iio trigger.\n");
1561 		goto error_uninit_buffer;
1562 	}
1563 
1564 	/* This needs to be requested here for read_raw calls to work. */
1565 	err = request_threaded_irq(client->irq, NULL,
1566 				   &gp2ap020a00f_thresh_event_handler,
1567 				   IRQF_TRIGGER_FALLING |
1568 				   IRQF_ONESHOT,
1569 				   "gp2ap020a00f_als_event",
1570 				   indio_dev);
1571 	if (err < 0) {
1572 		dev_err(&client->dev, "Irq request failed.\n");
1573 		goto error_uninit_buffer;
1574 	}
1575 
1576 	data->trig->ops = &gp2ap020a00f_trigger_ops;
1577 	data->trig->dev.parent = &data->client->dev;
1578 
1579 	init_irq_work(&data->work, gp2ap020a00f_iio_trigger_work);
1580 
1581 	err = iio_trigger_register(data->trig);
1582 	if (err < 0) {
1583 		dev_err(&client->dev, "Failed to register iio trigger.\n");
1584 		goto error_free_irq;
1585 	}
1586 
1587 	err = iio_device_register(indio_dev);
1588 	if (err < 0)
1589 		goto error_trigger_unregister;
1590 
1591 	return 0;
1592 
1593 error_trigger_unregister:
1594 	iio_trigger_unregister(data->trig);
1595 error_free_irq:
1596 	free_irq(client->irq, indio_dev);
1597 error_uninit_buffer:
1598 	iio_triggered_buffer_cleanup(indio_dev);
1599 error_regulator_disable:
1600 	regulator_disable(data->vled_reg);
1601 
1602 	return err;
1603 }
1604 
1605 static int gp2ap020a00f_remove(struct i2c_client *client)
1606 {
1607 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
1608 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1609 	int err;
1610 
1611 	err = gp2ap020a00f_set_operation_mode(data,
1612 					GP2AP020A00F_OPMODE_SHUTDOWN);
1613 	if (err < 0)
1614 		dev_err(&indio_dev->dev, "Failed to power off the device.\n");
1615 
1616 	iio_device_unregister(indio_dev);
1617 	iio_trigger_unregister(data->trig);
1618 	free_irq(client->irq, indio_dev);
1619 	iio_triggered_buffer_cleanup(indio_dev);
1620 	regulator_disable(data->vled_reg);
1621 
1622 	return 0;
1623 }
1624 
1625 static const struct i2c_device_id gp2ap020a00f_id[] = {
1626 	{ GP2A_I2C_NAME, 0 },
1627 	{ }
1628 };
1629 
1630 MODULE_DEVICE_TABLE(i2c, gp2ap020a00f_id);
1631 
1632 #ifdef CONFIG_OF
1633 static const struct of_device_id gp2ap020a00f_of_match[] = {
1634 	{ .compatible = "sharp,gp2ap020a00f" },
1635 	{ }
1636 };
1637 MODULE_DEVICE_TABLE(of, gp2ap020a00f_of_match);
1638 #endif
1639 
1640 static struct i2c_driver gp2ap020a00f_driver = {
1641 	.driver = {
1642 		.name	= GP2A_I2C_NAME,
1643 		.of_match_table = of_match_ptr(gp2ap020a00f_of_match),
1644 	},
1645 	.probe		= gp2ap020a00f_probe,
1646 	.remove		= gp2ap020a00f_remove,
1647 	.id_table	= gp2ap020a00f_id,
1648 };
1649 
1650 module_i2c_driver(gp2ap020a00f_driver);
1651 
1652 MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
1653 MODULE_DESCRIPTION("Sharp GP2AP020A00F Proximity/ALS sensor driver");
1654 MODULE_LICENSE("GPL v2");
1655