xref: /linux/drivers/iio/light/cm3232.c (revision 2fe05e1139a555ae91f00a812cb9520e7d3022ab)
1 /*
2  * CM3232 Ambient Light Sensor
3  *
4  * Copyright (C) 2014-2015 Capella Microsystems Inc.
5  * Author: Kevin Tsai <ktsai@capellamicro.com>
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms of the GNU General Public License version 2, as published
9  * by the Free Software Foundation.
10  *
11  * IIO driver for CM3232 (7-bit I2C slave address 0x10).
12  */
13 
14 #include <linux/i2c.h>
15 #include <linux/module.h>
16 #include <linux/iio/iio.h>
17 #include <linux/iio/sysfs.h>
18 #include <linux/init.h>
19 
20 /* Registers Address */
21 #define CM3232_REG_ADDR_CMD		0x00
22 #define CM3232_REG_ADDR_ALS		0x50
23 #define CM3232_REG_ADDR_ID		0x53
24 
25 #define CM3232_CMD_ALS_DISABLE		BIT(0)
26 
27 #define CM3232_CMD_ALS_IT_SHIFT		2
28 #define CM3232_CMD_ALS_IT_MASK		(BIT(2) | BIT(3) | BIT(4))
29 #define CM3232_CMD_ALS_IT_DEFAULT	(0x01 << CM3232_CMD_ALS_IT_SHIFT)
30 
31 #define CM3232_CMD_ALS_RESET		BIT(6)
32 
33 #define CM3232_CMD_DEFAULT		CM3232_CMD_ALS_IT_DEFAULT
34 
35 #define CM3232_HW_ID			0x32
36 #define CM3232_CALIBSCALE_DEFAULT	100000
37 #define CM3232_CALIBSCALE_RESOLUTION	100000
38 #define CM3232_MLUX_PER_LUX		1000
39 
40 #define CM3232_MLUX_PER_BIT_DEFAULT	64
41 #define CM3232_MLUX_PER_BIT_BASE_IT	100000
42 
43 static const struct {
44 	int val;
45 	int val2;
46 	u8 it;
47 } cm3232_als_it_scales[] = {
48 	{0, 100000, 0},	/* 0.100000 */
49 	{0, 200000, 1},	/* 0.200000 */
50 	{0, 400000, 2},	/* 0.400000 */
51 	{0, 800000, 3},	/* 0.800000 */
52 	{1, 600000, 4},	/* 1.600000 */
53 	{3, 200000, 5},	/* 3.200000 */
54 };
55 
56 struct cm3232_als_info {
57 	u8 regs_cmd_default;
58 	u8 hw_id;
59 	int calibscale;
60 	int mlux_per_bit;
61 	int mlux_per_bit_base_it;
62 };
63 
64 static struct cm3232_als_info cm3232_als_info_default = {
65 	.regs_cmd_default = CM3232_CMD_DEFAULT,
66 	.hw_id = CM3232_HW_ID,
67 	.calibscale = CM3232_CALIBSCALE_DEFAULT,
68 	.mlux_per_bit = CM3232_MLUX_PER_BIT_DEFAULT,
69 	.mlux_per_bit_base_it = CM3232_MLUX_PER_BIT_BASE_IT,
70 };
71 
72 struct cm3232_chip {
73 	struct i2c_client *client;
74 	struct cm3232_als_info *als_info;
75 	u8 regs_cmd;
76 	u16 regs_als;
77 };
78 
79 /**
80  * cm3232_reg_init() - Initialize CM3232
81  * @chip:	pointer of struct cm3232_chip.
82  *
83  * Check and initialize CM3232 ambient light sensor.
84  *
85  * Return: 0 for success; otherwise for error code.
86  */
87 static int cm3232_reg_init(struct cm3232_chip *chip)
88 {
89 	struct i2c_client *client = chip->client;
90 	s32 ret;
91 
92 	chip->als_info = &cm3232_als_info_default;
93 
94 	/* Identify device */
95 	ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ID);
96 	if (ret < 0) {
97 		dev_err(&chip->client->dev, "Error reading addr_id\n");
98 		return ret;
99 	}
100 
101 	if ((ret & 0xFF) != chip->als_info->hw_id)
102 		return -ENODEV;
103 
104 	/* Disable and reset device */
105 	chip->regs_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET;
106 	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
107 					chip->regs_cmd);
108 	if (ret < 0) {
109 		dev_err(&chip->client->dev, "Error writing reg_cmd\n");
110 		return ret;
111 	}
112 
113 	/* Register default value */
114 	chip->regs_cmd = chip->als_info->regs_cmd_default;
115 
116 	/* Configure register */
117 	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
118 					chip->regs_cmd);
119 	if (ret < 0)
120 		dev_err(&chip->client->dev, "Error writing reg_cmd\n");
121 
122 	return ret;
123 }
124 
125 /**
126  *  cm3232_read_als_it() - Get sensor integration time
127  *  @chip:	pointer of struct cm3232_chip
128  *  @val:	pointer of int to load the integration (sec).
129  *  @val2:	pointer of int to load the integration time (microsecond).
130  *
131  *  Report the current integration time.
132  *
133  *  Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
134  */
135 static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2)
136 {
137 	u16 als_it;
138 	int i;
139 
140 	als_it = chip->regs_cmd;
141 	als_it &= CM3232_CMD_ALS_IT_MASK;
142 	als_it >>= CM3232_CMD_ALS_IT_SHIFT;
143 	for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
144 		if (als_it == cm3232_als_it_scales[i].it) {
145 			*val = cm3232_als_it_scales[i].val;
146 			*val2 = cm3232_als_it_scales[i].val2;
147 			return IIO_VAL_INT_PLUS_MICRO;
148 		}
149 	}
150 
151 	return -EINVAL;
152 }
153 
154 /**
155  * cm3232_write_als_it() - Write sensor integration time
156  * @chip:	pointer of struct cm3232_chip.
157  * @val:	integration time in second.
158  * @val2:	integration time in microsecond.
159  *
160  * Convert integration time to sensor value.
161  *
162  * Return: i2c_smbus_write_byte_data command return value.
163  */
164 static int cm3232_write_als_it(struct cm3232_chip *chip, int val, int val2)
165 {
166 	struct i2c_client *client = chip->client;
167 	u16 als_it, cmd;
168 	int i;
169 	s32 ret;
170 
171 	for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
172 		if (val == cm3232_als_it_scales[i].val &&
173 			val2 == cm3232_als_it_scales[i].val2) {
174 
175 			als_it = cm3232_als_it_scales[i].it;
176 			als_it <<= CM3232_CMD_ALS_IT_SHIFT;
177 
178 			cmd = chip->regs_cmd & ~CM3232_CMD_ALS_IT_MASK;
179 			cmd |= als_it;
180 			ret = i2c_smbus_write_byte_data(client,
181 							CM3232_REG_ADDR_CMD,
182 							cmd);
183 			if (ret < 0)
184 				return ret;
185 			chip->regs_cmd = cmd;
186 			return 0;
187 		}
188 	}
189 	return -EINVAL;
190 }
191 
192 /**
193  * cm3232_get_lux() - report current lux value
194  * @chip:	pointer of struct cm3232_chip.
195  *
196  * Convert sensor data to lux.  It depends on integration
197  * time and calibscale variable.
198  *
199  * Return: Zero or positive value is lux, otherwise error code.
200  */
201 static int cm3232_get_lux(struct cm3232_chip *chip)
202 {
203 	struct i2c_client *client = chip->client;
204 	struct cm3232_als_info *als_info = chip->als_info;
205 	int ret;
206 	int val, val2;
207 	int als_it;
208 	u64 lux;
209 
210 	/* Calculate mlux per bit based on als_it */
211 	ret = cm3232_read_als_it(chip, &val, &val2);
212 	if (ret < 0)
213 		return -EINVAL;
214 	als_it = val * 1000000 + val2;
215 	lux = (__force u64)als_info->mlux_per_bit;
216 	lux *= als_info->mlux_per_bit_base_it;
217 	lux = div_u64(lux, als_it);
218 
219 	ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ALS);
220 	if (ret < 0) {
221 		dev_err(&client->dev, "Error reading reg_addr_als\n");
222 		return ret;
223 	}
224 
225 	chip->regs_als = (u16)ret;
226 	lux *= chip->regs_als;
227 	lux *= als_info->calibscale;
228 	lux = div_u64(lux, CM3232_CALIBSCALE_RESOLUTION);
229 	lux = div_u64(lux, CM3232_MLUX_PER_LUX);
230 
231 	if (lux > 0xFFFF)
232 		lux = 0xFFFF;
233 
234 	return (int)lux;
235 }
236 
237 static int cm3232_read_raw(struct iio_dev *indio_dev,
238 			struct iio_chan_spec const *chan,
239 			int *val, int *val2, long mask)
240 {
241 	struct cm3232_chip *chip = iio_priv(indio_dev);
242 	struct cm3232_als_info *als_info = chip->als_info;
243 	int ret;
244 
245 	switch (mask) {
246 	case IIO_CHAN_INFO_PROCESSED:
247 		ret = cm3232_get_lux(chip);
248 		if (ret < 0)
249 			return ret;
250 		*val = ret;
251 		return IIO_VAL_INT;
252 	case IIO_CHAN_INFO_CALIBSCALE:
253 		*val = als_info->calibscale;
254 		return IIO_VAL_INT;
255 	case IIO_CHAN_INFO_INT_TIME:
256 		return cm3232_read_als_it(chip, val, val2);
257 	}
258 
259 	return -EINVAL;
260 }
261 
262 static int cm3232_write_raw(struct iio_dev *indio_dev,
263 			struct iio_chan_spec const *chan,
264 			int val, int val2, long mask)
265 {
266 	struct cm3232_chip *chip = iio_priv(indio_dev);
267 	struct cm3232_als_info *als_info = chip->als_info;
268 
269 	switch (mask) {
270 	case IIO_CHAN_INFO_CALIBSCALE:
271 		als_info->calibscale = val;
272 		return 0;
273 	case IIO_CHAN_INFO_INT_TIME:
274 		return cm3232_write_als_it(chip, val, val2);
275 	}
276 
277 	return -EINVAL;
278 }
279 
280 /**
281  * cm3232_get_it_available() - Get available ALS IT value
282  * @dev:	pointer of struct device.
283  * @attr:	pointer of struct device_attribute.
284  * @buf:	pointer of return string buffer.
285  *
286  * Display the available integration time in second.
287  *
288  * Return: string length.
289  */
290 static ssize_t cm3232_get_it_available(struct device *dev,
291 			struct device_attribute *attr, char *buf)
292 {
293 	int i, len;
294 
295 	for (i = 0, len = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++)
296 		len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
297 			cm3232_als_it_scales[i].val,
298 			cm3232_als_it_scales[i].val2);
299 	return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
300 }
301 
302 static const struct iio_chan_spec cm3232_channels[] = {
303 	{
304 		.type = IIO_LIGHT,
305 		.info_mask_separate =
306 			BIT(IIO_CHAN_INFO_PROCESSED) |
307 			BIT(IIO_CHAN_INFO_CALIBSCALE) |
308 			BIT(IIO_CHAN_INFO_INT_TIME),
309 	}
310 };
311 
312 static IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
313 			S_IRUGO, cm3232_get_it_available, NULL, 0);
314 
315 static struct attribute *cm3232_attributes[] = {
316 	&iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
317 	NULL,
318 };
319 
320 static const struct attribute_group cm3232_attribute_group = {
321 	.attrs = cm3232_attributes
322 };
323 
324 static const struct iio_info cm3232_info = {
325 	.driver_module		= THIS_MODULE,
326 	.read_raw		= &cm3232_read_raw,
327 	.write_raw		= &cm3232_write_raw,
328 	.attrs			= &cm3232_attribute_group,
329 };
330 
331 static int cm3232_probe(struct i2c_client *client,
332 			const struct i2c_device_id *id)
333 {
334 	struct cm3232_chip *chip;
335 	struct iio_dev *indio_dev;
336 	int ret;
337 
338 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
339 	if (!indio_dev)
340 		return -ENOMEM;
341 
342 	chip = iio_priv(indio_dev);
343 	i2c_set_clientdata(client, indio_dev);
344 	chip->client = client;
345 
346 	indio_dev->dev.parent = &client->dev;
347 	indio_dev->channels = cm3232_channels;
348 	indio_dev->num_channels = ARRAY_SIZE(cm3232_channels);
349 	indio_dev->info = &cm3232_info;
350 	indio_dev->name = id->name;
351 	indio_dev->modes = INDIO_DIRECT_MODE;
352 
353 	ret = cm3232_reg_init(chip);
354 	if (ret) {
355 		dev_err(&client->dev,
356 			"%s: register init failed\n",
357 			__func__);
358 		return ret;
359 	}
360 
361 	return iio_device_register(indio_dev);
362 }
363 
364 static int cm3232_remove(struct i2c_client *client)
365 {
366 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
367 
368 	i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
369 		CM3232_CMD_ALS_DISABLE);
370 
371 	iio_device_unregister(indio_dev);
372 
373 	return 0;
374 }
375 
376 static const struct i2c_device_id cm3232_id[] = {
377 	{"cm3232", 0},
378 	{}
379 };
380 
381 #ifdef CONFIG_PM_SLEEP
382 static int cm3232_suspend(struct device *dev)
383 {
384 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
385 	struct cm3232_chip *chip = iio_priv(indio_dev);
386 	struct i2c_client *client = chip->client;
387 	int ret;
388 
389 	chip->regs_cmd |= CM3232_CMD_ALS_DISABLE;
390 	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
391 					chip->regs_cmd);
392 
393 	return ret;
394 }
395 
396 static int cm3232_resume(struct device *dev)
397 {
398 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
399 	struct cm3232_chip *chip = iio_priv(indio_dev);
400 	struct i2c_client *client = chip->client;
401 	int ret;
402 
403 	chip->regs_cmd &= ~CM3232_CMD_ALS_DISABLE;
404 	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
405 					chip->regs_cmd | CM3232_CMD_ALS_RESET);
406 
407 	return ret;
408 }
409 
410 static const struct dev_pm_ops cm3232_pm_ops = {
411 	SET_SYSTEM_SLEEP_PM_OPS(cm3232_suspend, cm3232_resume)};
412 #endif
413 
414 MODULE_DEVICE_TABLE(i2c, cm3232_id);
415 
416 static const struct of_device_id cm3232_of_match[] = {
417 	{.compatible = "capella,cm3232"},
418 	{}
419 };
420 MODULE_DEVICE_TABLE(of, cm3232_of_match);
421 
422 static struct i2c_driver cm3232_driver = {
423 	.driver = {
424 		.name	= "cm3232",
425 		.of_match_table = of_match_ptr(cm3232_of_match),
426 #ifdef CONFIG_PM_SLEEP
427 		.pm	= &cm3232_pm_ops,
428 #endif
429 	},
430 	.id_table	= cm3232_id,
431 	.probe		= cm3232_probe,
432 	.remove		= cm3232_remove,
433 };
434 
435 module_i2c_driver(cm3232_driver);
436 
437 MODULE_AUTHOR("Kevin Tsai <ktsai@capellamicro.com>");
438 MODULE_DESCRIPTION("CM3232 ambient light sensor driver");
439 MODULE_LICENSE("GPL");
440