1# 2# Light sensors 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Light sensors" 7 8config ACPI_ALS 9 tristate "ACPI Ambient Light Sensor" 10 depends on ACPI 11 select IIO_BUFFER 12 select IIO_TRIGGERED_BUFFER 13 select IIO_KFIFO_BUF 14 help 15 Say Y here if you want to build a driver for the ACPI0008 16 Ambient Light Sensor. 17 18 To compile this driver as a module, choose M here: the module will 19 be called acpi-als. 20 21config ADJD_S311 22 tristate "ADJD-S311-CR999 digital color sensor" 23 select IIO_BUFFER 24 select IIO_TRIGGERED_BUFFER 25 depends on I2C 26 help 27 If you say yes here you get support for the Avago ADJD-S311-CR999 28 digital color light sensor. 29 30 This driver can also be built as a module. If so, the module 31 will be called adjd_s311. 32 33config AL3320A 34 tristate "AL3320A ambient light sensor" 35 depends on I2C 36 help 37 Say Y here if you want to build a driver for the Dyna Image AL3320A 38 ambient light sensor. 39 40 To compile this driver as a module, choose M here: the 41 module will be called al3320a. 42 43config APDS9300 44 tristate "APDS9300 ambient light sensor" 45 depends on I2C 46 help 47 Say Y here if you want to build a driver for the Avago APDS9300 48 ambient light sensor. 49 50 To compile this driver as a module, choose M here: the 51 module will be called apds9300. 52 53config APDS9960 54 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 55 select REGMAP_I2C 56 select IIO_BUFFER 57 select IIO_KFIFO_BUF 58 depends on I2C 59 help 60 Say Y here to build I2C interface support for the Avago 61 APDS9960 gesture/RGB/ALS/proximity sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called apds9960 65 66config BH1750 67 tristate "ROHM BH1750 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 71 BH1750, BH1751 ambient light sensors. 72 73 To compile this driver as a module, choose M here: the module will 74 be called bh1750. 75 76config BH1780 77 tristate "ROHM BH1780 ambient light sensor" 78 depends on I2C 79 help 80 Say Y here to build support for the ROHM BH1780GLI ambient 81 light sensor. 82 83 To compile this driver as a module, choose M here: the module will 84 be called bh1780. 85 86config CM32181 87 depends on I2C 88 tristate "CM32181 driver" 89 help 90 Say Y here if you use cm32181. 91 This option enables ambient light sensor using 92 Capella cm32181 device driver. 93 94 To compile this driver as a module, choose M here: 95 the module will be called cm32181. 96 97config CM3232 98 depends on I2C 99 tristate "CM3232 ambient light sensor" 100 help 101 Say Y here if you use cm3232. 102 This option enables ambient light sensor using 103 Capella Microsystems cm3232 device driver. 104 105 To compile this driver as a module, choose M here: 106 the module will be called cm3232. 107 108config CM3323 109 depends on I2C 110 tristate "Capella CM3323 color light sensor" 111 help 112 Say Y here if you want to build a driver for Capella CM3323 113 color sensor. 114 115 To compile this driver as a module, choose M here: the module will 116 be called cm3323. 117 118config CM3605 119 tristate "Capella CM3605 ambient light and proximity sensor" 120 depends on OF 121 help 122 Say Y here if you want to build a driver for Capella CM3605 123 ambient light and short range proximity sensor. 124 125 To compile this driver as a module, choose M here: the module will 126 be called cm3605. 127 128config CM36651 129 depends on I2C 130 tristate "CM36651 driver" 131 help 132 Say Y here if you use cm36651. 133 This option enables proximity & RGB sensor using 134 Capella cm36651 device driver. 135 136 To compile this driver as a module, choose M here: 137 the module will be called cm36651. 138 139config IIO_CROS_EC_LIGHT_PROX 140 tristate "ChromeOS EC Light and Proximity Sensors" 141 depends on IIO_CROS_EC_SENSORS_CORE 142 help 143 Say Y here if you use the light and proximity sensors 144 presented by the ChromeOS EC Sensor hub. 145 146 To compile this driver as a module, choose M here: 147 the module will be called cros_ec_light_prox. 148 149config GP2AP020A00F 150 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 151 depends on I2C 152 select REGMAP_I2C 153 select IIO_BUFFER 154 select IIO_TRIGGERED_BUFFER 155 select IRQ_WORK 156 help 157 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 158 hooked to an I2C bus. 159 160 To compile this driver as a module, choose M here: the 161 module will be called gp2ap020a00f. 162 163config SENSORS_ISL29018 164 tristate "Intersil 29018 light and proximity sensor" 165 depends on I2C 166 select REGMAP_I2C 167 default n 168 help 169 If you say yes here you get support for ambient light sensing and 170 proximity infrared sensing from Intersil ISL29018. 171 This driver will provide the measurements of ambient light intensity 172 in lux, proximity infrared sensing and normal infrared sensing. 173 Data from sensor is accessible via sysfs. 174 175config ISL29125 176 tristate "Intersil ISL29125 digital color light sensor" 177 depends on I2C 178 select IIO_BUFFER 179 select IIO_TRIGGERED_BUFFER 180 help 181 Say Y here if you want to build a driver for the Intersil ISL29125 182 RGB light sensor for I2C. 183 184 To compile this driver as a module, choose M here: the module will be 185 called isl29125. 186 187config HID_SENSOR_ALS 188 depends on HID_SENSOR_HUB 189 select IIO_BUFFER 190 select IIO_TRIGGERED_BUFFER 191 select HID_SENSOR_IIO_COMMON 192 select HID_SENSOR_IIO_TRIGGER 193 tristate "HID ALS" 194 help 195 Say yes here to build support for the HID SENSOR 196 Ambient light sensor. 197 198 To compile this driver as a module, choose M here: the 199 module will be called hid-sensor-als. 200 201config HID_SENSOR_PROX 202 depends on HID_SENSOR_HUB 203 select IIO_BUFFER 204 select IIO_TRIGGERED_BUFFER 205 select HID_SENSOR_IIO_COMMON 206 select HID_SENSOR_IIO_TRIGGER 207 tristate "HID PROX" 208 help 209 Say yes here to build support for the HID SENSOR 210 Proximity sensor. 211 212 To compile this driver as a module, choose M here: the 213 module will be called hid-sensor-prox. 214 215config JSA1212 216 tristate "JSA1212 ALS and proximity sensor driver" 217 depends on I2C 218 select REGMAP_I2C 219 help 220 Say Y here if you want to build a IIO driver for JSA1212 221 proximity & ALS sensor device. 222 223 To compile this driver as a module, choose M here: 224 the module will be called jsa1212. 225 226config RPR0521 227 tristate "ROHM RPR0521 ALS and proximity sensor driver" 228 depends on I2C 229 select REGMAP_I2C 230 help 231 Say Y here if you want to build support for ROHM's RPR0521 232 ambient light and proximity sensor device. 233 234 To compile this driver as a module, choose M here: 235 the module will be called rpr0521. 236 237config SENSORS_LM3533 238 tristate "LM3533 ambient light sensor" 239 depends on MFD_LM3533 240 help 241 If you say yes here you get support for the ambient light sensor 242 interface on National Semiconductor / TI LM3533 Lighting Power 243 chips. 244 245 The sensor interface can be used to control the LEDs and backlights 246 of the chip through defining five light zones and three sets of 247 corresponding output-current values. 248 249 The driver provides raw and mean adc readings along with the current 250 light zone through sysfs. A threshold event can be generated on zone 251 changes. The ALS-control output values can be set per zone for the 252 three current output channels. 253 254config LTR501 255 tristate "LTR-501ALS-01 light sensor" 256 depends on I2C 257 select REGMAP_I2C 258 select IIO_BUFFER 259 select IIO_TRIGGERED_BUFFER 260 help 261 If you say yes here you get support for the Lite-On LTR-501ALS-01 262 ambient light and proximity sensor. This driver also supports LTR-559 263 ALS/PS or LTR-301 ALS sensors. 264 265 This driver can also be built as a module. If so, the module 266 will be called ltr501. 267 268config MAX44000 269 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 270 depends on I2C 271 select REGMAP_I2C 272 select IIO_BUFFER 273 select IIO_TRIGGERED_BUFFER 274 help 275 Say Y here if you want to build support for Maxim Integrated's 276 MAX44000 ambient and infrared proximity sensor device. 277 278 To compile this driver as a module, choose M here: 279 the module will be called max44000. 280 281config OPT3001 282 tristate "Texas Instruments OPT3001 Light Sensor" 283 depends on I2C 284 help 285 If you say Y or M here, you get support for Texas Instruments 286 OPT3001 Ambient Light Sensor. 287 288 If built as a dynamically linked module, it will be called 289 opt3001. 290 291config PA12203001 292 tristate "TXC PA12203001 light and proximity sensor" 293 depends on I2C 294 select REGMAP_I2C 295 help 296 If you say yes here you get support for the TXC PA12203001 297 ambient light and proximity sensor. 298 299 This driver can also be built as a module. If so, the module 300 will be called pa12203001. 301 302config SI1145 303 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 304 depends on I2C 305 select IIO_BUFFER 306 select IIO_TRIGGERED_BUFFER 307 help 308 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 309 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 310 chips. 311 312 To compile this driver as a module, choose M here: the module will be 313 called si1145. 314 315config STK3310 316 tristate "STK3310 ALS and proximity sensor" 317 depends on I2C 318 select REGMAP_I2C 319 help 320 Say yes here to get support for the Sensortek STK3310 ambient light 321 and proximity sensor. The STK3311 model is also supported by this 322 driver. 323 324 Choosing M will build the driver as a module. If so, the module 325 will be called stk3310. 326 327config TCS3414 328 tristate "TAOS TCS3414 digital color sensor" 329 depends on I2C 330 select IIO_BUFFER 331 select IIO_TRIGGERED_BUFFER 332 help 333 If you say yes here you get support for the TAOS TCS3414 334 family of digital color sensors. 335 336 This driver can also be built as a module. If so, the module 337 will be called tcs3414. 338 339config TCS3472 340 tristate "TAOS TCS3472 color light-to-digital converter" 341 depends on I2C 342 select IIO_BUFFER 343 select IIO_TRIGGERED_BUFFER 344 help 345 If you say yes here you get support for the TAOS TCS3472 346 family of color light-to-digital converters with IR filter. 347 348 This driver can also be built as a module. If so, the module 349 will be called tcs3472. 350 351config SENSORS_TSL2563 352 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 353 depends on I2C 354 help 355 If you say yes here you get support for the Taos TSL2560, 356 TSL2561, TSL2562 and TSL2563 ambient light sensors. 357 358 This driver can also be built as a module. If so, the module 359 will be called tsl2563. 360 361config TSL2583 362 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 363 depends on I2C 364 help 365 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 366 Access ALS data via iio, sysfs. 367 368config TSL4531 369 tristate "TAOS TSL4531 ambient light sensors" 370 depends on I2C 371 help 372 Say Y here if you want to build a driver for the TAOS TSL4531 family 373 of ambient light sensors with direct lux output. 374 375 To compile this driver as a module, choose M here: the 376 module will be called tsl4531. 377 378config US5182D 379 tristate "UPISEMI light and proximity sensor" 380 depends on I2C 381 help 382 If you say yes here you get support for the UPISEMI US5182D 383 ambient light and proximity sensor. 384 385 This driver can also be built as a module. If so, the module 386 will be called us5182d. 387 388config VCNL4000 389 tristate "VCNL4000/4010/4020 combined ALS and proximity sensor" 390 depends on I2C 391 help 392 Say Y here if you want to build a driver for the Vishay VCNL4000, 393 VCNL4010, VCNL4020 combined ambient light and proximity sensor. 394 395 To compile this driver as a module, choose M here: the 396 module will be called vcnl4000. 397 398config VEML6070 399 tristate "VEML6070 UV A light sensor" 400 depends on I2C 401 help 402 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 403 light sensor. 404 405 To compile this driver as a module, choose M here: the 406 module will be called veml6070. 407 408config VL6180 409 tristate "VL6180 ALS, range and proximity sensor" 410 depends on I2C 411 help 412 Say Y here if you want to build a driver for the STMicroelectronics 413 VL6180 combined ambient light, range and proximity sensor. 414 415 To compile this driver as a module, choose M here: the 416 module will be called vl6180. 417 418endmenu 419