1# 2# Light sensors 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Light sensors" 7 8config ACPI_ALS 9 tristate "ACPI Ambient Light Sensor" 10 depends on ACPI 11 select IIO_BUFFER 12 select IIO_TRIGGERED_BUFFER 13 select IIO_KFIFO_BUF 14 help 15 Say Y here if you want to build a driver for the ACPI0008 16 Ambient Light Sensor. 17 18 To compile this driver as a module, choose M here: the module will 19 be called acpi-als. 20 21config ADJD_S311 22 tristate "ADJD-S311-CR999 digital color sensor" 23 select IIO_BUFFER 24 select IIO_TRIGGERED_BUFFER 25 depends on I2C 26 help 27 If you say yes here you get support for the Avago ADJD-S311-CR999 28 digital color light sensor. 29 30 This driver can also be built as a module. If so, the module 31 will be called adjd_s311. 32 33config AL3320A 34 tristate "AL3320A ambient light sensor" 35 depends on I2C 36 help 37 Say Y here if you want to build a driver for the Dyna Image AL3320A 38 ambient light sensor. 39 40 To compile this driver as a module, choose M here: the 41 module will be called al3320a. 42 43config APDS9300 44 tristate "APDS9300 ambient light sensor" 45 depends on I2C 46 help 47 Say Y here if you want to build a driver for the Avago APDS9300 48 ambient light sensor. 49 50 To compile this driver as a module, choose M here: the 51 module will be called apds9300. 52 53config BH1750 54 tristate "ROHM BH1750 ambient light sensor" 55 depends on I2C 56 help 57 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 58 BH1750, BH1751 ambient light sensors. 59 60 To compile this driver as a module, choose M here: the module will 61 be called bh1750. 62 63config CM32181 64 depends on I2C 65 tristate "CM32181 driver" 66 help 67 Say Y here if you use cm32181. 68 This option enables ambient light sensor using 69 Capella cm32181 device driver. 70 71 To compile this driver as a module, choose M here: 72 the module will be called cm32181. 73 74config CM3232 75 depends on I2C 76 tristate "CM3232 ambient light sensor" 77 help 78 Say Y here if you use cm3232. 79 This option enables ambient light sensor using 80 Capella Microsystems cm3232 device driver. 81 82 To compile this driver as a module, choose M here: 83 the module will be called cm3232. 84 85config CM3323 86 depends on I2C 87 tristate "Capella CM3323 color light sensor" 88 help 89 Say Y here if you want to build a driver for Capella CM3323 90 color sensor. 91 92 To compile this driver as a module, choose M here: the module will 93 be called cm3323. 94 95config CM36651 96 depends on I2C 97 tristate "CM36651 driver" 98 help 99 Say Y here if you use cm36651. 100 This option enables proximity & RGB sensor using 101 Capella cm36651 device driver. 102 103 To compile this driver as a module, choose M here: 104 the module will be called cm36651. 105 106config GP2AP020A00F 107 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 108 depends on I2C 109 select REGMAP_I2C 110 select IIO_BUFFER 111 select IIO_TRIGGERED_BUFFER 112 select IRQ_WORK 113 help 114 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 115 hooked to an I2C bus. 116 117 To compile this driver as a module, choose M here: the 118 module will be called gp2ap020a00f. 119 120config ISL29125 121 tristate "Intersil ISL29125 digital color light sensor" 122 depends on I2C 123 select IIO_BUFFER 124 select IIO_TRIGGERED_BUFFER 125 help 126 Say Y here if you want to build a driver for the Intersil ISL29125 127 RGB light sensor for I2C. 128 129 To compile this driver as a module, choose M here: the module will be 130 called isl29125. 131 132config HID_SENSOR_ALS 133 depends on HID_SENSOR_HUB 134 select IIO_BUFFER 135 select IIO_TRIGGERED_BUFFER 136 select HID_SENSOR_IIO_COMMON 137 select HID_SENSOR_IIO_TRIGGER 138 tristate "HID ALS" 139 help 140 Say yes here to build support for the HID SENSOR 141 Ambient light sensor. 142 143 To compile this driver as a module, choose M here: the 144 module will be called hid-sensor-als. 145 146config HID_SENSOR_PROX 147 depends on HID_SENSOR_HUB 148 select IIO_BUFFER 149 select IIO_TRIGGERED_BUFFER 150 select HID_SENSOR_IIO_COMMON 151 select HID_SENSOR_IIO_TRIGGER 152 tristate "HID PROX" 153 help 154 Say yes here to build support for the HID SENSOR 155 Proximity sensor. 156 157 To compile this driver as a module, choose M here: the 158 module will be called hid-sensor-prox. 159 160config JSA1212 161 tristate "JSA1212 ALS and proximity sensor driver" 162 depends on I2C 163 select REGMAP_I2C 164 help 165 Say Y here if you want to build a IIO driver for JSA1212 166 proximity & ALS sensor device. 167 168 To compile this driver as a module, choose M here: 169 the module will be called jsa1212. 170 171config RPR0521 172 tristate "ROHM RPR0521 ALS and proximity sensor driver" 173 depends on I2C 174 select REGMAP_I2C 175 help 176 Say Y here if you want to build support for ROHM's RPR0521 177 ambient light and proximity sensor device. 178 179 To compile this driver as a module, choose M here: 180 the module will be called rpr0521. 181 182config SENSORS_LM3533 183 tristate "LM3533 ambient light sensor" 184 depends on MFD_LM3533 185 help 186 If you say yes here you get support for the ambient light sensor 187 interface on National Semiconductor / TI LM3533 Lighting Power 188 chips. 189 190 The sensor interface can be used to control the LEDs and backlights 191 of the chip through defining five light zones and three sets of 192 corresponding output-current values. 193 194 The driver provides raw and mean adc readings along with the current 195 light zone through sysfs. A threshold event can be generated on zone 196 changes. The ALS-control output values can be set per zone for the 197 three current output channels. 198 199config LTR501 200 tristate "LTR-501ALS-01 light sensor" 201 depends on I2C 202 select REGMAP_I2C 203 select IIO_BUFFER 204 select IIO_TRIGGERED_BUFFER 205 help 206 If you say yes here you get support for the Lite-On LTR-501ALS-01 207 ambient light and proximity sensor. This driver also supports LTR-559 208 ALS/PS or LTR-301 ALS sensors. 209 210 This driver can also be built as a module. If so, the module 211 will be called ltr501. 212 213config OPT3001 214 tristate "Texas Instruments OPT3001 Light Sensor" 215 depends on I2C 216 help 217 If you say Y or M here, you get support for Texas Instruments 218 OPT3001 Ambient Light Sensor. 219 220 If built as a dynamically linked module, it will be called 221 opt3001. 222 223config PA12203001 224 tristate "TXC PA12203001 light and proximity sensor" 225 depends on I2C 226 select REGMAP_I2C 227 help 228 If you say yes here you get support for the TXC PA12203001 229 ambient light and proximity sensor. 230 231 This driver can also be built as a module. If so, the module 232 will be called pa12203001. 233 234config STK3310 235 tristate "STK3310 ALS and proximity sensor" 236 depends on I2C 237 select REGMAP_I2C 238 help 239 Say yes here to get support for the Sensortek STK3310 ambient light 240 and proximity sensor. The STK3311 model is also supported by this 241 driver. 242 243 Choosing M will build the driver as a module. If so, the module 244 will be called stk3310. 245 246config TCS3414 247 tristate "TAOS TCS3414 digital color sensor" 248 depends on I2C 249 select IIO_BUFFER 250 select IIO_TRIGGERED_BUFFER 251 help 252 If you say yes here you get support for the TAOS TCS3414 253 family of digital color sensors. 254 255 This driver can also be built as a module. If so, the module 256 will be called tcs3414. 257 258config TCS3472 259 tristate "TAOS TCS3472 color light-to-digital converter" 260 depends on I2C 261 select IIO_BUFFER 262 select IIO_TRIGGERED_BUFFER 263 help 264 If you say yes here you get support for the TAOS TCS3472 265 family of color light-to-digital converters with IR filter. 266 267 This driver can also be built as a module. If so, the module 268 will be called tcs3472. 269 270config SENSORS_TSL2563 271 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 272 depends on I2C 273 help 274 If you say yes here you get support for the Taos TSL2560, 275 TSL2561, TSL2562 and TSL2563 ambient light sensors. 276 277 This driver can also be built as a module. If so, the module 278 will be called tsl2563. 279 280config TSL4531 281 tristate "TAOS TSL4531 ambient light sensors" 282 depends on I2C 283 help 284 Say Y here if you want to build a driver for the TAOS TSL4531 family 285 of ambient light sensors with direct lux output. 286 287 To compile this driver as a module, choose M here: the 288 module will be called tsl4531. 289 290config VCNL4000 291 tristate "VCNL4000 combined ALS and proximity sensor" 292 depends on I2C 293 help 294 Say Y here if you want to build a driver for the Vishay VCNL4000 295 combined ambient light and proximity sensor. 296 297 To compile this driver as a module, choose M here: the 298 module will be called vcnl4000. 299 300endmenu 301