1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config AL3320A 36 tristate "AL3320A ambient light sensor" 37 depends on I2C 38 help 39 Say Y here if you want to build a driver for the Dyna Image AL3320A 40 ambient light sensor. 41 42 To compile this driver as a module, choose M here: the 43 module will be called al3320a. 44 45config APDS9300 46 tristate "APDS9300 ambient light sensor" 47 depends on I2C 48 help 49 Say Y here if you want to build a driver for the Avago APDS9300 50 ambient light sensor. 51 52 To compile this driver as a module, choose M here: the 53 module will be called apds9300. 54 55config APDS9960 56 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 57 select REGMAP_I2C 58 select IIO_BUFFER 59 select IIO_KFIFO_BUF 60 depends on I2C 61 help 62 Say Y here to build I2C interface support for the Avago 63 APDS9960 gesture/RGB/ALS/proximity sensor. 64 65 To compile this driver as a module, choose M here: the 66 module will be called apds9960 67 68config BH1750 69 tristate "ROHM BH1750 ambient light sensor" 70 depends on I2C 71 help 72 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 73 BH1750, BH1751 ambient light sensors. 74 75 To compile this driver as a module, choose M here: the module will 76 be called bh1750. 77 78config BH1780 79 tristate "ROHM BH1780 ambient light sensor" 80 depends on I2C 81 help 82 Say Y here to build support for the ROHM BH1780GLI ambient 83 light sensor. 84 85 To compile this driver as a module, choose M here: the module will 86 be called bh1780. 87 88config CM32181 89 depends on I2C 90 tristate "CM32181 driver" 91 help 92 Say Y here if you use cm32181. 93 This option enables ambient light sensor using 94 Capella cm32181 device driver. 95 96 To compile this driver as a module, choose M here: 97 the module will be called cm32181. 98 99config CM3232 100 depends on I2C 101 tristate "CM3232 ambient light sensor" 102 help 103 Say Y here if you use cm3232. 104 This option enables ambient light sensor using 105 Capella Microsystems cm3232 device driver. 106 107 To compile this driver as a module, choose M here: 108 the module will be called cm3232. 109 110config CM3323 111 depends on I2C 112 tristate "Capella CM3323 color light sensor" 113 help 114 Say Y here if you want to build a driver for Capella CM3323 115 color sensor. 116 117 To compile this driver as a module, choose M here: the module will 118 be called cm3323. 119 120config CM3605 121 tristate "Capella CM3605 ambient light and proximity sensor" 122 depends on OF 123 help 124 Say Y here if you want to build a driver for Capella CM3605 125 ambient light and short range proximity sensor. 126 127 To compile this driver as a module, choose M here: the module will 128 be called cm3605. 129 130config CM36651 131 depends on I2C 132 tristate "CM36651 driver" 133 help 134 Say Y here if you use cm36651. 135 This option enables proximity & RGB sensor using 136 Capella cm36651 device driver. 137 138 To compile this driver as a module, choose M here: 139 the module will be called cm36651. 140 141config IIO_CROS_EC_LIGHT_PROX 142 tristate "ChromeOS EC Light and Proximity Sensors" 143 depends on IIO_CROS_EC_SENSORS_CORE 144 help 145 Say Y here if you use the light and proximity sensors 146 presented by the ChromeOS EC Sensor hub. 147 148 To compile this driver as a module, choose M here: 149 the module will be called cros_ec_light_prox. 150 151config GP2AP020A00F 152 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 153 depends on I2C 154 select REGMAP_I2C 155 select IIO_BUFFER 156 select IIO_TRIGGERED_BUFFER 157 select IRQ_WORK 158 help 159 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 160 hooked to an I2C bus. 161 162 To compile this driver as a module, choose M here: the 163 module will be called gp2ap020a00f. 164 165config SENSORS_ISL29018 166 tristate "Intersil 29018 light and proximity sensor" 167 depends on I2C 168 select REGMAP_I2C 169 default n 170 help 171 If you say yes here you get support for ambient light sensing and 172 proximity infrared sensing from Intersil ISL29018. 173 This driver will provide the measurements of ambient light intensity 174 in lux, proximity infrared sensing and normal infrared sensing. 175 Data from sensor is accessible via sysfs. 176 177config SENSORS_ISL29028 178 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 179 depends on I2C 180 select REGMAP_I2C 181 help 182 Provides driver for the Intersil's ISL29028 device. 183 This driver supports the sysfs interface to get the ALS, IR intensity, 184 Proximity value via iio. The ISL29028 provides the concurrent sensing 185 of ambient light and proximity. 186 187config ISL29125 188 tristate "Intersil ISL29125 digital color light sensor" 189 depends on I2C 190 select IIO_BUFFER 191 select IIO_TRIGGERED_BUFFER 192 help 193 Say Y here if you want to build a driver for the Intersil ISL29125 194 RGB light sensor for I2C. 195 196 To compile this driver as a module, choose M here: the module will be 197 called isl29125. 198 199config HID_SENSOR_ALS 200 depends on HID_SENSOR_HUB 201 select IIO_BUFFER 202 select IIO_TRIGGERED_BUFFER 203 select HID_SENSOR_IIO_COMMON 204 select HID_SENSOR_IIO_TRIGGER 205 tristate "HID ALS" 206 help 207 Say yes here to build support for the HID SENSOR 208 Ambient light sensor. 209 210 To compile this driver as a module, choose M here: the 211 module will be called hid-sensor-als. 212 213config HID_SENSOR_PROX 214 depends on HID_SENSOR_HUB 215 select IIO_BUFFER 216 select IIO_TRIGGERED_BUFFER 217 select HID_SENSOR_IIO_COMMON 218 select HID_SENSOR_IIO_TRIGGER 219 tristate "HID PROX" 220 help 221 Say yes here to build support for the HID SENSOR 222 Proximity sensor. 223 224 To compile this driver as a module, choose M here: the 225 module will be called hid-sensor-prox. 226 227config JSA1212 228 tristate "JSA1212 ALS and proximity sensor driver" 229 depends on I2C 230 select REGMAP_I2C 231 help 232 Say Y here if you want to build a IIO driver for JSA1212 233 proximity & ALS sensor device. 234 235 To compile this driver as a module, choose M here: 236 the module will be called jsa1212. 237 238config RPR0521 239 tristate "ROHM RPR0521 ALS and proximity sensor driver" 240 depends on I2C 241 select REGMAP_I2C 242 help 243 Say Y here if you want to build support for ROHM's RPR0521 244 ambient light and proximity sensor device. 245 246 To compile this driver as a module, choose M here: 247 the module will be called rpr0521. 248 249config SENSORS_LM3533 250 tristate "LM3533 ambient light sensor" 251 depends on MFD_LM3533 252 help 253 If you say yes here you get support for the ambient light sensor 254 interface on National Semiconductor / TI LM3533 Lighting Power 255 chips. 256 257 The sensor interface can be used to control the LEDs and backlights 258 of the chip through defining five light zones and three sets of 259 corresponding output-current values. 260 261 The driver provides raw and mean adc readings along with the current 262 light zone through sysfs. A threshold event can be generated on zone 263 changes. The ALS-control output values can be set per zone for the 264 three current output channels. 265 266config LTR501 267 tristate "LTR-501ALS-01 light sensor" 268 depends on I2C 269 select REGMAP_I2C 270 select IIO_BUFFER 271 select IIO_TRIGGERED_BUFFER 272 help 273 If you say yes here you get support for the Lite-On LTR-501ALS-01 274 ambient light and proximity sensor. This driver also supports LTR-559 275 ALS/PS or LTR-301 ALS sensors. 276 277 This driver can also be built as a module. If so, the module 278 will be called ltr501. 279 280config LV0104CS 281 tristate "LV0104CS Ambient Light Sensor" 282 depends on I2C 283 help 284 Say Y here if you want to build support for the On Semiconductor 285 LV0104CS ambient light sensor. 286 287 To compile this driver as a module, choose M here: 288 the module will be called lv0104cs. 289 290config MAX44000 291 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 292 depends on I2C 293 select REGMAP_I2C 294 select IIO_BUFFER 295 select IIO_TRIGGERED_BUFFER 296 help 297 Say Y here if you want to build support for Maxim Integrated's 298 MAX44000 ambient and infrared proximity sensor device. 299 300 To compile this driver as a module, choose M here: 301 the module will be called max44000. 302 303config MAX44009 304 tristate "MAX44009 Ambient Light Sensor" 305 depends on I2C 306 select REGMAP_I2C 307 help 308 Say Y here if you want to build support for Maxim Integrated's 309 MAX44009 ambient light sensor device. 310 311 To compile this driver as a module, choose M here: 312 the module will be called max44009. 313 314config NOA1305 315 tristate "ON Semiconductor NOA1305 ambient light sensor" 316 depends on I2C 317 help 318 Say Y here if you want to build support for the ON Semiconductor 319 NOA1305 ambient light sensor. 320 321 To compile this driver as a module, choose M here: 322 The module will be called noa1305. 323 324config OPT3001 325 tristate "Texas Instruments OPT3001 Light Sensor" 326 depends on I2C 327 help 328 If you say Y or M here, you get support for Texas Instruments 329 OPT3001 Ambient Light Sensor. 330 331 If built as a dynamically linked module, it will be called 332 opt3001. 333 334config PA12203001 335 tristate "TXC PA12203001 light and proximity sensor" 336 depends on I2C 337 select REGMAP_I2C 338 help 339 If you say yes here you get support for the TXC PA12203001 340 ambient light and proximity sensor. 341 342 This driver can also be built as a module. If so, the module 343 will be called pa12203001. 344 345config SI1133 346 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 347 depends on I2C 348 select REGMAP_I2C 349 help 350 Say Y here if you want to build a driver for the Silicon Labs SI1133 351 UV Index Sensor and Ambient Light Sensor chip. 352 353 To compile this driver as a module, choose M here: the module will be 354 called si1133. 355 356config SI1145 357 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 358 depends on I2C 359 select IIO_BUFFER 360 select IIO_TRIGGERED_BUFFER 361 help 362 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 363 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 364 chips. 365 366 To compile this driver as a module, choose M here: the module will be 367 called si1145. 368 369config STK3310 370 tristate "STK3310 ALS and proximity sensor" 371 depends on I2C 372 select REGMAP_I2C 373 help 374 Say yes here to get support for the Sensortek STK3310 ambient light 375 and proximity sensor. The STK3311 model is also supported by this 376 driver. 377 378 Choosing M will build the driver as a module. If so, the module 379 will be called stk3310. 380 381config ST_UVIS25 382 tristate "STMicroelectronics UVIS25 sensor driver" 383 depends on (I2C || SPI) 384 select IIO_BUFFER 385 select IIO_TRIGGERED_BUFFER 386 select ST_UVIS25_I2C if (I2C) 387 select ST_UVIS25_SPI if (SPI_MASTER) 388 help 389 Say yes here to build support for STMicroelectronics UVIS25 390 uv sensor 391 392 To compile this driver as a module, choose M here: the module 393 will be called st_uvis25. 394 395config ST_UVIS25_I2C 396 tristate 397 depends on ST_UVIS25 398 select REGMAP_I2C 399 400config ST_UVIS25_SPI 401 tristate 402 depends on ST_UVIS25 403 select REGMAP_SPI 404 405config TCS3414 406 tristate "TAOS TCS3414 digital color sensor" 407 depends on I2C 408 select IIO_BUFFER 409 select IIO_TRIGGERED_BUFFER 410 help 411 If you say yes here you get support for the TAOS TCS3414 412 family of digital color sensors. 413 414 This driver can also be built as a module. If so, the module 415 will be called tcs3414. 416 417config TCS3472 418 tristate "TAOS TCS3472 color light-to-digital converter" 419 depends on I2C 420 select IIO_BUFFER 421 select IIO_TRIGGERED_BUFFER 422 help 423 If you say yes here you get support for the TAOS TCS3472 424 family of color light-to-digital converters with IR filter. 425 426 This driver can also be built as a module. If so, the module 427 will be called tcs3472. 428 429config SENSORS_TSL2563 430 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 431 depends on I2C 432 help 433 If you say yes here you get support for the Taos TSL2560, 434 TSL2561, TSL2562 and TSL2563 ambient light sensors. 435 436 This driver can also be built as a module. If so, the module 437 will be called tsl2563. 438 439config TSL2583 440 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 441 depends on I2C 442 help 443 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 444 Access ALS data via iio, sysfs. 445 446config TSL2772 447 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 448 depends on I2C 449 help 450 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 451 tmd2672, tsl2772, tmd2772 devices. 452 Provides iio_events and direct access via sysfs. 453 454config TSL4531 455 tristate "TAOS TSL4531 ambient light sensors" 456 depends on I2C 457 help 458 Say Y here if you want to build a driver for the TAOS TSL4531 family 459 of ambient light sensors with direct lux output. 460 461 To compile this driver as a module, choose M here: the 462 module will be called tsl4531. 463 464config US5182D 465 tristate "UPISEMI light and proximity sensor" 466 depends on I2C 467 help 468 If you say yes here you get support for the UPISEMI US5182D 469 ambient light and proximity sensor. 470 471 This driver can also be built as a module. If so, the module 472 will be called us5182d. 473 474config VCNL4000 475 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 476 depends on I2C 477 help 478 Say Y here if you want to build a driver for the Vishay VCNL4000, 479 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 480 sensor. 481 482 To compile this driver as a module, choose M here: the 483 module will be called vcnl4000. 484 485config VCNL4035 486 tristate "VCNL4035 combined ALS and proximity sensor" 487 select IIO_TRIGGERED_BUFFER 488 select REGMAP_I2C 489 depends on I2C 490 help 491 Say Y here if you want to build a driver for the Vishay VCNL4035, 492 combined ambient light (ALS) and proximity sensor. Currently only ALS 493 function is available. 494 495 To compile this driver as a module, choose M here: the 496 module will be called vcnl4035. 497 498config VEML6070 499 tristate "VEML6070 UV A light sensor" 500 depends on I2C 501 help 502 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 503 light sensor. 504 505 To compile this driver as a module, choose M here: the 506 module will be called veml6070. 507 508config VL6180 509 tristate "VL6180 ALS, range and proximity sensor" 510 depends on I2C 511 help 512 Say Y here if you want to build a driver for the STMicroelectronics 513 VL6180 combined ambient light, range and proximity sensor. 514 515 To compile this driver as a module, choose M here: the 516 module will be called vl6180. 517 518config ZOPT2201 519 tristate "ZOPT2201 ALS and UV B sensor" 520 depends on I2C 521 help 522 Say Y here if you want to build a driver for the IDT 523 ZOPT2201 ambient light and UV B sensor. 524 525 To compile this driver as a module, choose M here: the 526 module will be called zopt2201. 527 528endmenu 529