1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config ADUX1020 36 tristate "ADUX1020 photometric sensor" 37 select REGMAP_I2C 38 depends on I2C 39 help 40 Say Y here if you want to build a driver for the Analog Devices 41 ADUX1020 photometric sensor. 42 43 To compile this driver as a module, choose M here: the 44 module will be called adux1020. 45 46config AL3010 47 tristate "AL3010 ambient light sensor" 48 depends on I2C 49 help 50 Say Y here if you want to build a driver for the Dyna Image AL3010 51 ambient light sensor. 52 53 To compile this driver as a module, choose M here: the 54 module will be called al3010. 55 56config AL3320A 57 tristate "AL3320A ambient light sensor" 58 depends on I2C 59 help 60 Say Y here if you want to build a driver for the Dyna Image AL3320A 61 ambient light sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called al3320a. 65 66config APDS9300 67 tristate "APDS9300 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here if you want to build a driver for the Avago APDS9300 71 ambient light sensor. 72 73 To compile this driver as a module, choose M here: the 74 module will be called apds9300. 75 76config APDS9960 77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 78 select REGMAP_I2C 79 select IIO_BUFFER 80 select IIO_KFIFO_BUF 81 depends on I2C 82 help 83 Say Y here to build I2C interface support for the Avago 84 APDS9960 gesture/RGB/ALS/proximity sensor. 85 86 To compile this driver as a module, choose M here: the 87 module will be called apds9960 88 89config AS73211 90 tristate "AMS AS73211 XYZ color sensor" 91 depends on I2C 92 select IIO_BUFFER 93 select IIO_TRIGGERED_BUFFER 94 help 95 If you say yes here you get support for the AMS AS73211 96 JENCOLOR(R) Digital XYZ Sensor. 97 98 For triggered measurements, you will need an additional trigger driver 99 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER. 100 101 This driver can also be built as a module. If so, the module 102 will be called as73211. 103 104config BH1750 105 tristate "ROHM BH1750 ambient light sensor" 106 depends on I2C 107 help 108 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 109 BH1750, BH1751 ambient light sensors. 110 111 To compile this driver as a module, choose M here: the module will 112 be called bh1750. 113 114config BH1780 115 tristate "ROHM BH1780 ambient light sensor" 116 depends on I2C 117 help 118 Say Y here to build support for the ROHM BH1780GLI ambient 119 light sensor. 120 121 To compile this driver as a module, choose M here: the module will 122 be called bh1780. 123 124config CM32181 125 depends on I2C 126 tristate "CM32181 driver" 127 help 128 Say Y here if you use cm32181. 129 This option enables ambient light sensor using 130 Capella cm32181 device driver. 131 132 To compile this driver as a module, choose M here: 133 the module will be called cm32181. 134 135config CM3232 136 depends on I2C 137 tristate "CM3232 ambient light sensor" 138 help 139 Say Y here if you use cm3232. 140 This option enables ambient light sensor using 141 Capella Microsystems cm3232 device driver. 142 143 To compile this driver as a module, choose M here: 144 the module will be called cm3232. 145 146config CM3323 147 depends on I2C 148 tristate "Capella CM3323 color light sensor" 149 help 150 Say Y here if you want to build a driver for Capella CM3323 151 color sensor. 152 153 To compile this driver as a module, choose M here: the module will 154 be called cm3323. 155 156config CM3605 157 tristate "Capella CM3605 ambient light and proximity sensor" 158 help 159 Say Y here if you want to build a driver for Capella CM3605 160 ambient light and short range proximity sensor. 161 162 To compile this driver as a module, choose M here: the module will 163 be called cm3605. 164 165config CM36651 166 depends on I2C 167 tristate "CM36651 driver" 168 help 169 Say Y here if you use cm36651. 170 This option enables proximity & RGB sensor using 171 Capella cm36651 device driver. 172 173 To compile this driver as a module, choose M here: 174 the module will be called cm36651. 175 176config IIO_CROS_EC_LIGHT_PROX 177 tristate "ChromeOS EC Light and Proximity Sensors" 178 depends on IIO_CROS_EC_SENSORS_CORE 179 help 180 Say Y here if you use the light and proximity sensors 181 presented by the ChromeOS EC Sensor hub. 182 183 To compile this driver as a module, choose M here: 184 the module will be called cros_ec_light_prox. 185 186config GP2AP002 187 tristate "Sharp GP2AP002 Proximity/ALS sensor" 188 depends on I2C 189 select REGMAP 190 help 191 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip 192 hooked to an I2C bus. 193 194 To compile this driver as a module, choose M here: the 195 module will be called gp2ap002. 196 197config GP2AP020A00F 198 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 199 depends on I2C 200 select REGMAP_I2C 201 select IIO_BUFFER 202 select IIO_TRIGGERED_BUFFER 203 select IRQ_WORK 204 help 205 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 206 hooked to an I2C bus. 207 208 To compile this driver as a module, choose M here: the 209 module will be called gp2ap020a00f. 210 211config IQS621_ALS 212 tristate "Azoteq IQS621/622 ambient light sensors" 213 depends on MFD_IQS62X || COMPILE_TEST 214 help 215 Say Y here if you want to build support for the Azoteq IQS621 216 and IQS622 ambient light sensors. 217 218 To compile this driver as a module, choose M here: the module 219 will be called iqs621-als. 220 221config SENSORS_ISL29018 222 tristate "Intersil 29018 light and proximity sensor" 223 depends on I2C 224 select REGMAP_I2C 225 default n 226 help 227 If you say yes here you get support for ambient light sensing and 228 proximity infrared sensing from Intersil ISL29018. 229 This driver will provide the measurements of ambient light intensity 230 in lux, proximity infrared sensing and normal infrared sensing. 231 Data from sensor is accessible via sysfs. 232 233config SENSORS_ISL29028 234 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 235 depends on I2C 236 select REGMAP_I2C 237 help 238 Provides driver for the Intersil's ISL29028 device. 239 This driver supports the sysfs interface to get the ALS, IR intensity, 240 Proximity value via iio. The ISL29028 provides the concurrent sensing 241 of ambient light and proximity. 242 243config ISL29125 244 tristate "Intersil ISL29125 digital color light sensor" 245 depends on I2C 246 select IIO_BUFFER 247 select IIO_TRIGGERED_BUFFER 248 help 249 Say Y here if you want to build a driver for the Intersil ISL29125 250 RGB light sensor for I2C. 251 252 To compile this driver as a module, choose M here: the module will be 253 called isl29125. 254 255config HID_SENSOR_ALS 256 depends on HID_SENSOR_HUB 257 select IIO_BUFFER 258 select HID_SENSOR_IIO_COMMON 259 select HID_SENSOR_IIO_TRIGGER 260 tristate "HID ALS" 261 help 262 Say yes here to build support for the HID SENSOR 263 Ambient light sensor. 264 265 To compile this driver as a module, choose M here: the 266 module will be called hid-sensor-als. 267 268config HID_SENSOR_PROX 269 depends on HID_SENSOR_HUB 270 select IIO_BUFFER 271 select HID_SENSOR_IIO_COMMON 272 select HID_SENSOR_IIO_TRIGGER 273 tristate "HID PROX" 274 help 275 Say yes here to build support for the HID SENSOR 276 Proximity sensor. 277 278 To compile this driver as a module, choose M here: the 279 module will be called hid-sensor-prox. 280 281config JSA1212 282 tristate "JSA1212 ALS and proximity sensor driver" 283 depends on I2C 284 select REGMAP_I2C 285 help 286 Say Y here if you want to build a IIO driver for JSA1212 287 proximity & ALS sensor device. 288 289 To compile this driver as a module, choose M here: 290 the module will be called jsa1212. 291 292config RPR0521 293 tristate "ROHM RPR0521 ALS and proximity sensor driver" 294 depends on I2C 295 select REGMAP_I2C 296 help 297 Say Y here if you want to build support for ROHM's RPR0521 298 ambient light and proximity sensor device. 299 300 To compile this driver as a module, choose M here: 301 the module will be called rpr0521. 302 303config SENSORS_LM3533 304 tristate "LM3533 ambient light sensor" 305 depends on MFD_LM3533 306 help 307 If you say yes here you get support for the ambient light sensor 308 interface on National Semiconductor / TI LM3533 Lighting Power 309 chips. 310 311 The sensor interface can be used to control the LEDs and backlights 312 of the chip through defining five light zones and three sets of 313 corresponding output-current values. 314 315 The driver provides raw and mean adc readings along with the current 316 light zone through sysfs. A threshold event can be generated on zone 317 changes. The ALS-control output values can be set per zone for the 318 three current output channels. 319 320config LTR501 321 tristate "LTR-501ALS-01 light sensor" 322 depends on I2C 323 select REGMAP_I2C 324 select IIO_BUFFER 325 select IIO_TRIGGERED_BUFFER 326 help 327 If you say yes here you get support for the Lite-On LTR-501ALS-01 328 ambient light and proximity sensor. This driver also supports LTR-559 329 ALS/PS or LTR-301 ALS sensors. 330 331 This driver can also be built as a module. If so, the module 332 will be called ltr501. 333 334config LV0104CS 335 tristate "LV0104CS Ambient Light Sensor" 336 depends on I2C 337 help 338 Say Y here if you want to build support for the On Semiconductor 339 LV0104CS ambient light sensor. 340 341 To compile this driver as a module, choose M here: 342 the module will be called lv0104cs. 343 344config MAX44000 345 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 346 depends on I2C 347 select REGMAP_I2C 348 select IIO_BUFFER 349 select IIO_TRIGGERED_BUFFER 350 help 351 Say Y here if you want to build support for Maxim Integrated's 352 MAX44000 ambient and infrared proximity sensor device. 353 354 To compile this driver as a module, choose M here: 355 the module will be called max44000. 356 357config MAX44009 358 tristate "MAX44009 Ambient Light Sensor" 359 depends on I2C 360 select REGMAP_I2C 361 help 362 Say Y here if you want to build support for Maxim Integrated's 363 MAX44009 ambient light sensor device. 364 365 To compile this driver as a module, choose M here: 366 the module will be called max44009. 367 368config NOA1305 369 tristate "ON Semiconductor NOA1305 ambient light sensor" 370 depends on I2C 371 select REGMAP_I2C 372 help 373 Say Y here if you want to build support for the ON Semiconductor 374 NOA1305 ambient light sensor. 375 376 To compile this driver as a module, choose M here: 377 The module will be called noa1305. 378 379config OPT3001 380 tristate "Texas Instruments OPT3001 Light Sensor" 381 depends on I2C 382 help 383 If you say Y or M here, you get support for Texas Instruments 384 OPT3001 Ambient Light Sensor. 385 386 If built as a dynamically linked module, it will be called 387 opt3001. 388 389config PA12203001 390 tristate "TXC PA12203001 light and proximity sensor" 391 depends on I2C 392 select REGMAP_I2C 393 help 394 If you say yes here you get support for the TXC PA12203001 395 ambient light and proximity sensor. 396 397 This driver can also be built as a module. If so, the module 398 will be called pa12203001. 399 400config SI1133 401 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 402 depends on I2C 403 select REGMAP_I2C 404 help 405 Say Y here if you want to build a driver for the Silicon Labs SI1133 406 UV Index Sensor and Ambient Light Sensor chip. 407 408 To compile this driver as a module, choose M here: the module will be 409 called si1133. 410 411config SI1145 412 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 413 depends on I2C 414 select IIO_BUFFER 415 select IIO_TRIGGERED_BUFFER 416 help 417 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 418 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 419 chips. 420 421 To compile this driver as a module, choose M here: the module will be 422 called si1145. 423 424config STK3310 425 tristate "STK3310 ALS and proximity sensor" 426 depends on I2C 427 select REGMAP_I2C 428 help 429 Say yes here to get support for the Sensortek STK3310 ambient light 430 and proximity sensor. The STK3311 model is also supported by this 431 driver. 432 433 Choosing M will build the driver as a module. If so, the module 434 will be called stk3310. 435 436config ST_UVIS25 437 tristate "STMicroelectronics UVIS25 sensor driver" 438 depends on (I2C || SPI) 439 select IIO_BUFFER 440 select IIO_TRIGGERED_BUFFER 441 select ST_UVIS25_I2C if (I2C) 442 select ST_UVIS25_SPI if (SPI_MASTER) 443 help 444 Say yes here to build support for STMicroelectronics UVIS25 445 uv sensor 446 447 To compile this driver as a module, choose M here: the module 448 will be called st_uvis25. 449 450config ST_UVIS25_I2C 451 tristate 452 depends on ST_UVIS25 453 select REGMAP_I2C 454 455config ST_UVIS25_SPI 456 tristate 457 depends on ST_UVIS25 458 select REGMAP_SPI 459 460config TCS3414 461 tristate "TAOS TCS3414 digital color sensor" 462 depends on I2C 463 select IIO_BUFFER 464 select IIO_TRIGGERED_BUFFER 465 help 466 If you say yes here you get support for the TAOS TCS3414 467 family of digital color sensors. 468 469 This driver can also be built as a module. If so, the module 470 will be called tcs3414. 471 472config TCS3472 473 tristate "TAOS TCS3472 color light-to-digital converter" 474 depends on I2C 475 select IIO_BUFFER 476 select IIO_TRIGGERED_BUFFER 477 help 478 If you say yes here you get support for the TAOS TCS3472 479 family of color light-to-digital converters with IR filter. 480 481 This driver can also be built as a module. If so, the module 482 will be called tcs3472. 483 484config SENSORS_TSL2563 485 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 486 depends on I2C 487 help 488 If you say yes here you get support for the Taos TSL2560, 489 TSL2561, TSL2562 and TSL2563 ambient light sensors. 490 491 This driver can also be built as a module. If so, the module 492 will be called tsl2563. 493 494config TSL2583 495 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 496 depends on I2C 497 help 498 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 499 Access ALS data via iio, sysfs. 500 501config TSL2591 502 tristate "TAOS TSL2591 ambient light sensor" 503 depends on I2C 504 help 505 Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor, 506 featuring channels for combined visible + IR intensity and lux illuminance. 507 Access data via iio and sysfs. Supports iio_events. 508 509 To compile this driver as a module, select M: the 510 module will be called tsl2591. 511 512config TSL2772 513 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 514 depends on I2C 515 help 516 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 517 tmd2672, tsl2772, tmd2772 devices. 518 Provides iio_events and direct access via sysfs. 519 520config TSL4531 521 tristate "TAOS TSL4531 ambient light sensors" 522 depends on I2C 523 help 524 Say Y here if you want to build a driver for the TAOS TSL4531 family 525 of ambient light sensors with direct lux output. 526 527 To compile this driver as a module, choose M here: the 528 module will be called tsl4531. 529 530config US5182D 531 tristate "UPISEMI light and proximity sensor" 532 depends on I2C 533 help 534 If you say yes here you get support for the UPISEMI US5182D 535 ambient light and proximity sensor. 536 537 This driver can also be built as a module. If so, the module 538 will be called us5182d. 539 540config VCNL4000 541 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 542 select IIO_BUFFER 543 select IIO_TRIGGERED_BUFFER 544 depends on I2C 545 help 546 Say Y here if you want to build a driver for the Vishay VCNL4000, 547 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 548 sensor. 549 550 To compile this driver as a module, choose M here: the 551 module will be called vcnl4000. 552 553config VCNL4035 554 tristate "VCNL4035 combined ALS and proximity sensor" 555 select IIO_BUFFER 556 select IIO_TRIGGERED_BUFFER 557 select REGMAP_I2C 558 depends on I2C 559 help 560 Say Y here if you want to build a driver for the Vishay VCNL4035, 561 combined ambient light (ALS) and proximity sensor. Currently only ALS 562 function is available. 563 564 To compile this driver as a module, choose M here: the 565 module will be called vcnl4035. 566 567config VEML6030 568 tristate "VEML6030 ambient light sensor" 569 select REGMAP_I2C 570 depends on I2C 571 help 572 Say Y here if you want to build a driver for the Vishay VEML6030 573 ambient light sensor (ALS). 574 575 To compile this driver as a module, choose M here: the 576 module will be called veml6030. 577 578config VEML6070 579 tristate "VEML6070 UV A light sensor" 580 depends on I2C 581 help 582 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 583 light sensor. 584 585 To compile this driver as a module, choose M here: the 586 module will be called veml6070. 587 588config VL6180 589 tristate "VL6180 ALS, range and proximity sensor" 590 depends on I2C 591 help 592 Say Y here if you want to build a driver for the STMicroelectronics 593 VL6180 combined ambient light, range and proximity sensor. 594 595 To compile this driver as a module, choose M here: the 596 module will be called vl6180. 597 598config ZOPT2201 599 tristate "ZOPT2201 ALS and UV B sensor" 600 depends on I2C 601 help 602 Say Y here if you want to build a driver for the IDT 603 ZOPT2201 ambient light and UV B sensor. 604 605 To compile this driver as a module, choose M here: the 606 module will be called zopt2201. 607 608endmenu 609