1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * BME680 - SPI Driver 4 * 5 * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com> 6 */ 7 #include <linux/mod_devicetable.h> 8 #include <linux/module.h> 9 #include <linux/regmap.h> 10 #include <linux/spi/spi.h> 11 12 #include "bme680.h" 13 14 struct bme680_spi_bus_context { 15 struct spi_device *spi; 16 u8 current_page; 17 }; 18 19 /* 20 * In SPI mode there are only 7 address bits, a "page" register determines 21 * which part of the 8-bit range is active. This function looks at the address 22 * and writes the page selection bit if needed 23 */ 24 static int bme680_regmap_spi_select_page( 25 struct bme680_spi_bus_context *ctx, u8 reg) 26 { 27 struct spi_device *spi = ctx->spi; 28 int ret; 29 u8 buf[2]; 30 u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */ 31 32 if (page == ctx->current_page) 33 return 0; 34 35 /* 36 * Data sheet claims we're only allowed to change bit 4, so we must do 37 * a read-modify-write on each and every page select 38 */ 39 buf[0] = BME680_REG_STATUS; 40 ret = spi_write_then_read(spi, buf, 1, buf + 1, 1); 41 if (ret < 0) { 42 dev_err(&spi->dev, "failed to set page %u\n", page); 43 return ret; 44 } 45 46 buf[0] = BME680_REG_STATUS; 47 if (page) 48 buf[1] |= BME680_SPI_MEM_PAGE_BIT; 49 else 50 buf[1] &= ~BME680_SPI_MEM_PAGE_BIT; 51 52 ret = spi_write(spi, buf, 2); 53 if (ret < 0) { 54 dev_err(&spi->dev, "failed to set page %u\n", page); 55 return ret; 56 } 57 58 ctx->current_page = page; 59 60 return 0; 61 } 62 63 static int bme680_regmap_spi_write(void *context, const void *data, 64 size_t count) 65 { 66 struct bme680_spi_bus_context *ctx = context; 67 struct spi_device *spi = ctx->spi; 68 int ret; 69 u8 buf[2]; 70 71 memcpy(buf, data, 2); 72 73 ret = bme680_regmap_spi_select_page(ctx, buf[0]); 74 if (ret) 75 return ret; 76 77 /* 78 * The SPI register address (= full register address without bit 7) 79 * and the write command (bit7 = RW = '0') 80 */ 81 buf[0] &= ~0x80; 82 83 return spi_write(spi, buf, 2); 84 } 85 86 static int bme680_regmap_spi_read(void *context, const void *reg, 87 size_t reg_size, void *val, size_t val_size) 88 { 89 struct bme680_spi_bus_context *ctx = context; 90 struct spi_device *spi = ctx->spi; 91 int ret; 92 u8 addr = *(const u8 *)reg; 93 94 ret = bme680_regmap_spi_select_page(ctx, addr); 95 if (ret) 96 return ret; 97 98 addr |= 0x80; /* bit7 = RW = '1' */ 99 100 return spi_write_then_read(spi, &addr, 1, val, val_size); 101 } 102 103 static const struct regmap_bus bme680_regmap_bus = { 104 .write = bme680_regmap_spi_write, 105 .read = bme680_regmap_spi_read, 106 .reg_format_endian_default = REGMAP_ENDIAN_BIG, 107 .val_format_endian_default = REGMAP_ENDIAN_BIG, 108 }; 109 110 static int bme680_spi_probe(struct spi_device *spi) 111 { 112 const struct spi_device_id *id = spi_get_device_id(spi); 113 struct bme680_spi_bus_context *bus_context; 114 struct regmap *regmap; 115 int ret; 116 117 spi->bits_per_word = 8; 118 ret = spi_setup(spi); 119 if (ret < 0) { 120 dev_err(&spi->dev, "spi_setup failed!\n"); 121 return ret; 122 } 123 124 bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL); 125 if (!bus_context) 126 return -ENOMEM; 127 128 bus_context->spi = spi; 129 bus_context->current_page = 0xff; /* Undefined on warm boot */ 130 131 regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus, 132 bus_context, &bme680_regmap_config); 133 if (IS_ERR(regmap)) { 134 dev_err(&spi->dev, "Failed to register spi regmap %ld\n", PTR_ERR(regmap)); 135 return PTR_ERR(regmap); 136 } 137 138 return bme680_core_probe(&spi->dev, regmap, id->name); 139 } 140 141 static const struct spi_device_id bme680_spi_id[] = { 142 {"bme680", 0}, 143 {}, 144 }; 145 MODULE_DEVICE_TABLE(spi, bme680_spi_id); 146 147 static const struct of_device_id bme680_of_spi_match[] = { 148 { .compatible = "bosch,bme680", }, 149 {}, 150 }; 151 MODULE_DEVICE_TABLE(of, bme680_of_spi_match); 152 153 static struct spi_driver bme680_spi_driver = { 154 .driver = { 155 .name = "bme680_spi", 156 .of_match_table = bme680_of_spi_match, 157 }, 158 .probe = bme680_spi_probe, 159 .id_table = bme680_spi_id, 160 }; 161 module_spi_driver(bme680_spi_driver); 162 163 MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>"); 164 MODULE_DESCRIPTION("Bosch BME680 SPI driver"); 165 MODULE_LICENSE("GPL v2"); 166 MODULE_IMPORT_NS(IIO_BME680); 167