1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Freescale Vybrid vf610 ADC driver 4 * 5 * Copyright 2013 Freescale Semiconductor, Inc. 6 */ 7 8 #include <linux/mod_devicetable.h> 9 #include <linux/module.h> 10 #include <linux/mutex.h> 11 #include <linux/property.h> 12 #include <linux/platform_device.h> 13 #include <linux/interrupt.h> 14 #include <linux/delay.h> 15 #include <linux/kernel.h> 16 #include <linux/slab.h> 17 #include <linux/io.h> 18 #include <linux/clk.h> 19 #include <linux/completion.h> 20 #include <linux/regulator/consumer.h> 21 #include <linux/err.h> 22 23 #include <linux/iio/iio.h> 24 #include <linux/iio/buffer.h> 25 #include <linux/iio/sysfs.h> 26 #include <linux/iio/trigger.h> 27 #include <linux/iio/trigger_consumer.h> 28 #include <linux/iio/triggered_buffer.h> 29 30 /* This will be the driver name the kernel reports */ 31 #define DRIVER_NAME "vf610-adc" 32 33 /* Vybrid/IMX ADC registers */ 34 #define VF610_REG_ADC_HC0 0x00 35 #define VF610_REG_ADC_HC1 0x04 36 #define VF610_REG_ADC_HS 0x08 37 #define VF610_REG_ADC_R0 0x0c 38 #define VF610_REG_ADC_R1 0x10 39 #define VF610_REG_ADC_CFG 0x14 40 #define VF610_REG_ADC_GC 0x18 41 #define VF610_REG_ADC_GS 0x1c 42 #define VF610_REG_ADC_CV 0x20 43 #define VF610_REG_ADC_OFS 0x24 44 #define VF610_REG_ADC_CAL 0x28 45 #define VF610_REG_ADC_PCTL 0x30 46 47 /* Configuration register field define */ 48 #define VF610_ADC_MODE_BIT8 0x00 49 #define VF610_ADC_MODE_BIT10 0x04 50 #define VF610_ADC_MODE_BIT12 0x08 51 #define VF610_ADC_MODE_MASK 0x0c 52 #define VF610_ADC_BUSCLK2_SEL 0x01 53 #define VF610_ADC_ALTCLK_SEL 0x02 54 #define VF610_ADC_ADACK_SEL 0x03 55 #define VF610_ADC_ADCCLK_MASK 0x03 56 #define VF610_ADC_CLK_DIV2 0x20 57 #define VF610_ADC_CLK_DIV4 0x40 58 #define VF610_ADC_CLK_DIV8 0x60 59 #define VF610_ADC_CLK_MASK 0x60 60 #define VF610_ADC_ADLSMP_LONG 0x10 61 #define VF610_ADC_ADSTS_SHORT 0x100 62 #define VF610_ADC_ADSTS_NORMAL 0x200 63 #define VF610_ADC_ADSTS_LONG 0x300 64 #define VF610_ADC_ADSTS_MASK 0x300 65 #define VF610_ADC_ADLPC_EN 0x80 66 #define VF610_ADC_ADHSC_EN 0x400 67 #define VF610_ADC_REFSEL_VALT 0x800 68 #define VF610_ADC_REFSEL_VBG 0x1000 69 #define VF610_ADC_ADTRG_HARD 0x2000 70 #define VF610_ADC_AVGS_8 0x4000 71 #define VF610_ADC_AVGS_16 0x8000 72 #define VF610_ADC_AVGS_32 0xC000 73 #define VF610_ADC_AVGS_MASK 0xC000 74 #define VF610_ADC_OVWREN 0x10000 75 76 /* General control register field define */ 77 #define VF610_ADC_ADACKEN 0x1 78 #define VF610_ADC_DMAEN 0x2 79 #define VF610_ADC_ACREN 0x4 80 #define VF610_ADC_ACFGT 0x8 81 #define VF610_ADC_ACFE 0x10 82 #define VF610_ADC_AVGEN 0x20 83 #define VF610_ADC_ADCON 0x40 84 #define VF610_ADC_CAL 0x80 85 86 /* Other field define */ 87 #define VF610_ADC_ADCHC(x) ((x) & 0x1F) 88 #define VF610_ADC_AIEN (0x1 << 7) 89 #define VF610_ADC_CONV_DISABLE 0x1F 90 #define VF610_ADC_HS_COCO0 0x1 91 #define VF610_ADC_CALF 0x2 92 #define VF610_ADC_TIMEOUT msecs_to_jiffies(100) 93 94 #define DEFAULT_SAMPLE_TIME 1000 95 96 /* V at 25°C of 696 mV */ 97 #define VF610_VTEMP25_3V0 950 98 /* V at 25°C of 699 mV */ 99 #define VF610_VTEMP25_3V3 867 100 /* Typical sensor slope coefficient at all temperatures */ 101 #define VF610_TEMP_SLOPE_COEFF 1840 102 103 enum clk_sel { 104 VF610_ADCIOC_BUSCLK_SET, 105 VF610_ADCIOC_ALTCLK_SET, 106 VF610_ADCIOC_ADACK_SET, 107 }; 108 109 enum vol_ref { 110 VF610_ADCIOC_VR_VREF_SET, 111 VF610_ADCIOC_VR_VALT_SET, 112 VF610_ADCIOC_VR_VBG_SET, 113 }; 114 115 enum average_sel { 116 VF610_ADC_SAMPLE_1, 117 VF610_ADC_SAMPLE_4, 118 VF610_ADC_SAMPLE_8, 119 VF610_ADC_SAMPLE_16, 120 VF610_ADC_SAMPLE_32, 121 }; 122 123 enum conversion_mode_sel { 124 VF610_ADC_CONV_NORMAL, 125 VF610_ADC_CONV_HIGH_SPEED, 126 VF610_ADC_CONV_LOW_POWER, 127 }; 128 129 enum lst_adder_sel { 130 VF610_ADCK_CYCLES_3, 131 VF610_ADCK_CYCLES_5, 132 VF610_ADCK_CYCLES_7, 133 VF610_ADCK_CYCLES_9, 134 VF610_ADCK_CYCLES_13, 135 VF610_ADCK_CYCLES_17, 136 VF610_ADCK_CYCLES_21, 137 VF610_ADCK_CYCLES_25, 138 }; 139 140 struct vf610_adc_feature { 141 enum clk_sel clk_sel; 142 enum vol_ref vol_ref; 143 enum conversion_mode_sel conv_mode; 144 145 int clk_div; 146 int sample_rate; 147 int res_mode; 148 u32 lst_adder_index; 149 u32 default_sample_time; 150 151 bool calibration; 152 bool ovwren; 153 }; 154 155 struct vf610_adc { 156 struct device *dev; 157 void __iomem *regs; 158 struct clk *clk; 159 160 /* lock to protect against multiple access to the device */ 161 struct mutex lock; 162 163 u32 vref_uv; 164 u32 value; 165 struct regulator *vref; 166 167 u32 max_adck_rate[3]; 168 struct vf610_adc_feature adc_feature; 169 170 u32 sample_freq_avail[5]; 171 172 struct completion completion; 173 /* Ensure the timestamp is naturally aligned */ 174 struct { 175 u16 chan; 176 s64 timestamp __aligned(8); 177 } scan; 178 }; 179 180 static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 }; 181 static const u32 vf610_lst_adder[] = { 3, 5, 7, 9, 13, 17, 21, 25 }; 182 183 static inline void vf610_adc_calculate_rates(struct vf610_adc *info) 184 { 185 struct vf610_adc_feature *adc_feature = &info->adc_feature; 186 unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk); 187 u32 adck_period, lst_addr_min; 188 int divisor, i; 189 190 adck_rate = info->max_adck_rate[adc_feature->conv_mode]; 191 192 if (adck_rate) { 193 /* calculate clk divider which is within specification */ 194 divisor = ipg_rate / adck_rate; 195 adc_feature->clk_div = 1 << fls(divisor + 1); 196 } else { 197 /* fall-back value using a safe divisor */ 198 adc_feature->clk_div = 8; 199 } 200 201 adck_rate = ipg_rate / adc_feature->clk_div; 202 203 /* 204 * Determine the long sample time adder value to be used based 205 * on the default minimum sample time provided. 206 */ 207 adck_period = NSEC_PER_SEC / adck_rate; 208 lst_addr_min = adc_feature->default_sample_time / adck_period; 209 for (i = 0; i < ARRAY_SIZE(vf610_lst_adder); i++) { 210 if (vf610_lst_adder[i] > lst_addr_min) { 211 adc_feature->lst_adder_index = i; 212 break; 213 } 214 } 215 216 /* 217 * Calculate ADC sample frequencies 218 * Sample time unit is ADCK cycles. ADCK clk source is ipg clock, 219 * which is the same as bus clock. 220 * 221 * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder) 222 * SFCAdder: fixed to 6 ADCK cycles 223 * AverageNum: 1, 4, 8, 16, 32 samples for hardware average. 224 * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode 225 * LSTAdder(Long Sample Time): 3, 5, 7, 9, 13, 17, 21, 25 ADCK cycles 226 */ 227 for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++) 228 info->sample_freq_avail[i] = 229 adck_rate / (6 + vf610_hw_avgs[i] * 230 (25 + vf610_lst_adder[adc_feature->lst_adder_index])); 231 } 232 233 static inline void vf610_adc_cfg_init(struct vf610_adc *info) 234 { 235 struct vf610_adc_feature *adc_feature = &info->adc_feature; 236 237 /* set default Configuration for ADC controller */ 238 adc_feature->clk_sel = VF610_ADCIOC_BUSCLK_SET; 239 adc_feature->vol_ref = VF610_ADCIOC_VR_VREF_SET; 240 241 adc_feature->calibration = true; 242 adc_feature->ovwren = true; 243 244 adc_feature->res_mode = 12; 245 adc_feature->sample_rate = 1; 246 247 adc_feature->conv_mode = VF610_ADC_CONV_LOW_POWER; 248 249 vf610_adc_calculate_rates(info); 250 } 251 252 static void vf610_adc_cfg_post_set(struct vf610_adc *info) 253 { 254 struct vf610_adc_feature *adc_feature = &info->adc_feature; 255 int cfg_data = 0; 256 int gc_data = 0; 257 258 switch (adc_feature->clk_sel) { 259 case VF610_ADCIOC_ALTCLK_SET: 260 cfg_data |= VF610_ADC_ALTCLK_SEL; 261 break; 262 case VF610_ADCIOC_ADACK_SET: 263 cfg_data |= VF610_ADC_ADACK_SEL; 264 break; 265 default: 266 break; 267 } 268 269 /* low power set for calibration */ 270 cfg_data |= VF610_ADC_ADLPC_EN; 271 272 /* enable high speed for calibration */ 273 cfg_data |= VF610_ADC_ADHSC_EN; 274 275 /* voltage reference */ 276 switch (adc_feature->vol_ref) { 277 case VF610_ADCIOC_VR_VREF_SET: 278 break; 279 case VF610_ADCIOC_VR_VALT_SET: 280 cfg_data |= VF610_ADC_REFSEL_VALT; 281 break; 282 case VF610_ADCIOC_VR_VBG_SET: 283 cfg_data |= VF610_ADC_REFSEL_VBG; 284 break; 285 default: 286 dev_err(info->dev, "error voltage reference\n"); 287 } 288 289 /* data overwrite enable */ 290 if (adc_feature->ovwren) 291 cfg_data |= VF610_ADC_OVWREN; 292 293 writel(cfg_data, info->regs + VF610_REG_ADC_CFG); 294 writel(gc_data, info->regs + VF610_REG_ADC_GC); 295 } 296 297 static void vf610_adc_calibration(struct vf610_adc *info) 298 { 299 int adc_gc, hc_cfg; 300 301 if (!info->adc_feature.calibration) 302 return; 303 304 /* enable calibration interrupt */ 305 hc_cfg = VF610_ADC_AIEN | VF610_ADC_CONV_DISABLE; 306 writel(hc_cfg, info->regs + VF610_REG_ADC_HC0); 307 308 adc_gc = readl(info->regs + VF610_REG_ADC_GC); 309 writel(adc_gc | VF610_ADC_CAL, info->regs + VF610_REG_ADC_GC); 310 311 if (!wait_for_completion_timeout(&info->completion, VF610_ADC_TIMEOUT)) 312 dev_err(info->dev, "Timeout for adc calibration\n"); 313 314 adc_gc = readl(info->regs + VF610_REG_ADC_GS); 315 if (adc_gc & VF610_ADC_CALF) 316 dev_err(info->dev, "ADC calibration failed\n"); 317 318 info->adc_feature.calibration = false; 319 } 320 321 static void vf610_adc_cfg_set(struct vf610_adc *info) 322 { 323 struct vf610_adc_feature *adc_feature = &(info->adc_feature); 324 int cfg_data; 325 326 cfg_data = readl(info->regs + VF610_REG_ADC_CFG); 327 328 cfg_data &= ~VF610_ADC_ADLPC_EN; 329 if (adc_feature->conv_mode == VF610_ADC_CONV_LOW_POWER) 330 cfg_data |= VF610_ADC_ADLPC_EN; 331 332 cfg_data &= ~VF610_ADC_ADHSC_EN; 333 if (adc_feature->conv_mode == VF610_ADC_CONV_HIGH_SPEED) 334 cfg_data |= VF610_ADC_ADHSC_EN; 335 336 writel(cfg_data, info->regs + VF610_REG_ADC_CFG); 337 } 338 339 static void vf610_adc_sample_set(struct vf610_adc *info) 340 { 341 struct vf610_adc_feature *adc_feature = &(info->adc_feature); 342 int cfg_data, gc_data; 343 344 cfg_data = readl(info->regs + VF610_REG_ADC_CFG); 345 gc_data = readl(info->regs + VF610_REG_ADC_GC); 346 347 /* resolution mode */ 348 cfg_data &= ~VF610_ADC_MODE_MASK; 349 switch (adc_feature->res_mode) { 350 case 8: 351 cfg_data |= VF610_ADC_MODE_BIT8; 352 break; 353 case 10: 354 cfg_data |= VF610_ADC_MODE_BIT10; 355 break; 356 case 12: 357 cfg_data |= VF610_ADC_MODE_BIT12; 358 break; 359 default: 360 dev_err(info->dev, "error resolution mode\n"); 361 break; 362 } 363 364 /* clock select and clock divider */ 365 cfg_data &= ~(VF610_ADC_CLK_MASK | VF610_ADC_ADCCLK_MASK); 366 switch (adc_feature->clk_div) { 367 case 1: 368 break; 369 case 2: 370 cfg_data |= VF610_ADC_CLK_DIV2; 371 break; 372 case 4: 373 cfg_data |= VF610_ADC_CLK_DIV4; 374 break; 375 case 8: 376 cfg_data |= VF610_ADC_CLK_DIV8; 377 break; 378 case 16: 379 switch (adc_feature->clk_sel) { 380 case VF610_ADCIOC_BUSCLK_SET: 381 cfg_data |= VF610_ADC_BUSCLK2_SEL | VF610_ADC_CLK_DIV8; 382 break; 383 default: 384 dev_err(info->dev, "error clk divider\n"); 385 break; 386 } 387 break; 388 } 389 390 /* 391 * Set ADLSMP and ADSTS based on the Long Sample Time Adder value 392 * determined. 393 */ 394 switch (adc_feature->lst_adder_index) { 395 case VF610_ADCK_CYCLES_3: 396 break; 397 case VF610_ADCK_CYCLES_5: 398 cfg_data |= VF610_ADC_ADSTS_SHORT; 399 break; 400 case VF610_ADCK_CYCLES_7: 401 cfg_data |= VF610_ADC_ADSTS_NORMAL; 402 break; 403 case VF610_ADCK_CYCLES_9: 404 cfg_data |= VF610_ADC_ADSTS_LONG; 405 break; 406 case VF610_ADCK_CYCLES_13: 407 cfg_data |= VF610_ADC_ADLSMP_LONG; 408 break; 409 case VF610_ADCK_CYCLES_17: 410 cfg_data |= VF610_ADC_ADLSMP_LONG; 411 cfg_data |= VF610_ADC_ADSTS_SHORT; 412 break; 413 case VF610_ADCK_CYCLES_21: 414 cfg_data |= VF610_ADC_ADLSMP_LONG; 415 cfg_data |= VF610_ADC_ADSTS_NORMAL; 416 break; 417 case VF610_ADCK_CYCLES_25: 418 cfg_data |= VF610_ADC_ADLSMP_LONG; 419 cfg_data |= VF610_ADC_ADSTS_NORMAL; 420 break; 421 default: 422 dev_err(info->dev, "error in sample time select\n"); 423 } 424 425 /* update hardware average selection */ 426 cfg_data &= ~VF610_ADC_AVGS_MASK; 427 gc_data &= ~VF610_ADC_AVGEN; 428 switch (adc_feature->sample_rate) { 429 case VF610_ADC_SAMPLE_1: 430 break; 431 case VF610_ADC_SAMPLE_4: 432 gc_data |= VF610_ADC_AVGEN; 433 break; 434 case VF610_ADC_SAMPLE_8: 435 gc_data |= VF610_ADC_AVGEN; 436 cfg_data |= VF610_ADC_AVGS_8; 437 break; 438 case VF610_ADC_SAMPLE_16: 439 gc_data |= VF610_ADC_AVGEN; 440 cfg_data |= VF610_ADC_AVGS_16; 441 break; 442 case VF610_ADC_SAMPLE_32: 443 gc_data |= VF610_ADC_AVGEN; 444 cfg_data |= VF610_ADC_AVGS_32; 445 break; 446 default: 447 dev_err(info->dev, 448 "error hardware sample average select\n"); 449 } 450 451 writel(cfg_data, info->regs + VF610_REG_ADC_CFG); 452 writel(gc_data, info->regs + VF610_REG_ADC_GC); 453 } 454 455 static void vf610_adc_hw_init(struct vf610_adc *info) 456 { 457 /* CFG: Feature set */ 458 vf610_adc_cfg_post_set(info); 459 vf610_adc_sample_set(info); 460 461 /* adc calibration */ 462 vf610_adc_calibration(info); 463 464 /* CFG: power and speed set */ 465 vf610_adc_cfg_set(info); 466 } 467 468 static int vf610_set_conversion_mode(struct iio_dev *indio_dev, 469 const struct iio_chan_spec *chan, 470 unsigned int mode) 471 { 472 struct vf610_adc *info = iio_priv(indio_dev); 473 474 mutex_lock(&info->lock); 475 info->adc_feature.conv_mode = mode; 476 vf610_adc_calculate_rates(info); 477 vf610_adc_hw_init(info); 478 mutex_unlock(&info->lock); 479 480 return 0; 481 } 482 483 static int vf610_get_conversion_mode(struct iio_dev *indio_dev, 484 const struct iio_chan_spec *chan) 485 { 486 struct vf610_adc *info = iio_priv(indio_dev); 487 488 return info->adc_feature.conv_mode; 489 } 490 491 static const char * const vf610_conv_modes[] = { "normal", "high-speed", 492 "low-power" }; 493 494 static const struct iio_enum vf610_conversion_mode = { 495 .items = vf610_conv_modes, 496 .num_items = ARRAY_SIZE(vf610_conv_modes), 497 .get = vf610_get_conversion_mode, 498 .set = vf610_set_conversion_mode, 499 }; 500 501 static const struct iio_chan_spec_ext_info vf610_ext_info[] = { 502 IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, &vf610_conversion_mode), 503 {}, 504 }; 505 506 #define VF610_ADC_CHAN(_idx, _chan_type) { \ 507 .type = (_chan_type), \ 508 .indexed = 1, \ 509 .channel = (_idx), \ 510 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 511 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ 512 BIT(IIO_CHAN_INFO_SAMP_FREQ), \ 513 .ext_info = vf610_ext_info, \ 514 .scan_index = (_idx), \ 515 .scan_type = { \ 516 .sign = 'u', \ 517 .realbits = 12, \ 518 .storagebits = 16, \ 519 }, \ 520 } 521 522 #define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \ 523 .type = (_chan_type), \ 524 .channel = (_idx), \ 525 .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ 526 .scan_index = (_idx), \ 527 .scan_type = { \ 528 .sign = 'u', \ 529 .realbits = 12, \ 530 .storagebits = 16, \ 531 }, \ 532 } 533 534 static const struct iio_chan_spec vf610_adc_iio_channels[] = { 535 VF610_ADC_CHAN(0, IIO_VOLTAGE), 536 VF610_ADC_CHAN(1, IIO_VOLTAGE), 537 VF610_ADC_CHAN(2, IIO_VOLTAGE), 538 VF610_ADC_CHAN(3, IIO_VOLTAGE), 539 VF610_ADC_CHAN(4, IIO_VOLTAGE), 540 VF610_ADC_CHAN(5, IIO_VOLTAGE), 541 VF610_ADC_CHAN(6, IIO_VOLTAGE), 542 VF610_ADC_CHAN(7, IIO_VOLTAGE), 543 VF610_ADC_CHAN(8, IIO_VOLTAGE), 544 VF610_ADC_CHAN(9, IIO_VOLTAGE), 545 VF610_ADC_CHAN(10, IIO_VOLTAGE), 546 VF610_ADC_CHAN(11, IIO_VOLTAGE), 547 VF610_ADC_CHAN(12, IIO_VOLTAGE), 548 VF610_ADC_CHAN(13, IIO_VOLTAGE), 549 VF610_ADC_CHAN(14, IIO_VOLTAGE), 550 VF610_ADC_CHAN(15, IIO_VOLTAGE), 551 VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP), 552 IIO_CHAN_SOFT_TIMESTAMP(32), 553 /* sentinel */ 554 }; 555 556 static int vf610_adc_read_data(struct vf610_adc *info) 557 { 558 int result; 559 560 result = readl(info->regs + VF610_REG_ADC_R0); 561 562 switch (info->adc_feature.res_mode) { 563 case 8: 564 result &= 0xFF; 565 break; 566 case 10: 567 result &= 0x3FF; 568 break; 569 case 12: 570 result &= 0xFFF; 571 break; 572 default: 573 break; 574 } 575 576 return result; 577 } 578 579 static irqreturn_t vf610_adc_isr(int irq, void *dev_id) 580 { 581 struct iio_dev *indio_dev = dev_id; 582 struct vf610_adc *info = iio_priv(indio_dev); 583 int coco; 584 585 coco = readl(info->regs + VF610_REG_ADC_HS); 586 if (coco & VF610_ADC_HS_COCO0) { 587 info->value = vf610_adc_read_data(info); 588 if (iio_buffer_enabled(indio_dev)) { 589 info->scan.chan = info->value; 590 iio_push_to_buffers_with_timestamp(indio_dev, 591 &info->scan, 592 iio_get_time_ns(indio_dev)); 593 iio_trigger_notify_done(indio_dev->trig); 594 } else 595 complete(&info->completion); 596 } 597 598 return IRQ_HANDLED; 599 } 600 601 static ssize_t vf610_show_samp_freq_avail(struct device *dev, 602 struct device_attribute *attr, char *buf) 603 { 604 struct vf610_adc *info = iio_priv(dev_to_iio_dev(dev)); 605 size_t len = 0; 606 int i; 607 608 for (i = 0; i < ARRAY_SIZE(info->sample_freq_avail); i++) 609 len += scnprintf(buf + len, PAGE_SIZE - len, 610 "%u ", info->sample_freq_avail[i]); 611 612 /* replace trailing space by newline */ 613 buf[len - 1] = '\n'; 614 615 return len; 616 } 617 618 static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(vf610_show_samp_freq_avail); 619 620 static struct attribute *vf610_attributes[] = { 621 &iio_dev_attr_sampling_frequency_available.dev_attr.attr, 622 NULL 623 }; 624 625 static const struct attribute_group vf610_attribute_group = { 626 .attrs = vf610_attributes, 627 }; 628 629 static int vf610_read_sample(struct iio_dev *indio_dev, 630 struct iio_chan_spec const *chan, int *val) 631 { 632 struct vf610_adc *info = iio_priv(indio_dev); 633 unsigned int hc_cfg; 634 int ret; 635 636 ret = iio_device_claim_direct_mode(indio_dev); 637 if (ret) 638 return ret; 639 640 mutex_lock(&info->lock); 641 reinit_completion(&info->completion); 642 hc_cfg = VF610_ADC_ADCHC(chan->channel); 643 hc_cfg |= VF610_ADC_AIEN; 644 writel(hc_cfg, info->regs + VF610_REG_ADC_HC0); 645 ret = wait_for_completion_interruptible_timeout(&info->completion, 646 VF610_ADC_TIMEOUT); 647 if (ret == 0) { 648 ret = -ETIMEDOUT; 649 goto out_unlock; 650 } 651 652 if (ret < 0) 653 goto out_unlock; 654 655 switch (chan->type) { 656 case IIO_VOLTAGE: 657 *val = info->value; 658 break; 659 case IIO_TEMP: 660 /* 661 * Calculate in degree Celsius times 1000 662 * Using the typical sensor slope of 1.84 mV/°C 663 * and VREFH_ADC at 3.3V, V at 25°C of 699 mV 664 */ 665 *val = 25000 - ((int)info->value - VF610_VTEMP25_3V3) * 666 1000000 / VF610_TEMP_SLOPE_COEFF; 667 668 break; 669 default: 670 ret = -EINVAL; 671 break; 672 } 673 674 out_unlock: 675 mutex_unlock(&info->lock); 676 iio_device_release_direct_mode(indio_dev); 677 678 return ret; 679 } 680 681 static int vf610_read_raw(struct iio_dev *indio_dev, 682 struct iio_chan_spec const *chan, 683 int *val, 684 int *val2, 685 long mask) 686 { 687 struct vf610_adc *info = iio_priv(indio_dev); 688 long ret; 689 690 switch (mask) { 691 case IIO_CHAN_INFO_RAW: 692 case IIO_CHAN_INFO_PROCESSED: 693 ret = vf610_read_sample(indio_dev, chan, val); 694 if (ret < 0) 695 return ret; 696 697 return IIO_VAL_INT; 698 699 case IIO_CHAN_INFO_SCALE: 700 *val = info->vref_uv / 1000; 701 *val2 = info->adc_feature.res_mode; 702 return IIO_VAL_FRACTIONAL_LOG2; 703 704 case IIO_CHAN_INFO_SAMP_FREQ: 705 *val = info->sample_freq_avail[info->adc_feature.sample_rate]; 706 *val2 = 0; 707 return IIO_VAL_INT; 708 709 default: 710 break; 711 } 712 713 return -EINVAL; 714 } 715 716 static int vf610_write_raw(struct iio_dev *indio_dev, 717 struct iio_chan_spec const *chan, 718 int val, 719 int val2, 720 long mask) 721 { 722 struct vf610_adc *info = iio_priv(indio_dev); 723 int i; 724 725 switch (mask) { 726 case IIO_CHAN_INFO_SAMP_FREQ: 727 for (i = 0; 728 i < ARRAY_SIZE(info->sample_freq_avail); 729 i++) 730 if (val == info->sample_freq_avail[i]) { 731 info->adc_feature.sample_rate = i; 732 vf610_adc_sample_set(info); 733 return 0; 734 } 735 break; 736 737 default: 738 break; 739 } 740 741 return -EINVAL; 742 } 743 744 static int vf610_adc_buffer_postenable(struct iio_dev *indio_dev) 745 { 746 struct vf610_adc *info = iio_priv(indio_dev); 747 unsigned int channel; 748 int val; 749 750 val = readl(info->regs + VF610_REG_ADC_GC); 751 val |= VF610_ADC_ADCON; 752 writel(val, info->regs + VF610_REG_ADC_GC); 753 754 channel = find_first_bit(indio_dev->active_scan_mask, 755 indio_dev->masklength); 756 757 val = VF610_ADC_ADCHC(channel); 758 val |= VF610_ADC_AIEN; 759 760 writel(val, info->regs + VF610_REG_ADC_HC0); 761 762 return 0; 763 } 764 765 static int vf610_adc_buffer_predisable(struct iio_dev *indio_dev) 766 { 767 struct vf610_adc *info = iio_priv(indio_dev); 768 unsigned int hc_cfg = 0; 769 int val; 770 771 val = readl(info->regs + VF610_REG_ADC_GC); 772 val &= ~VF610_ADC_ADCON; 773 writel(val, info->regs + VF610_REG_ADC_GC); 774 775 hc_cfg |= VF610_ADC_CONV_DISABLE; 776 hc_cfg &= ~VF610_ADC_AIEN; 777 778 writel(hc_cfg, info->regs + VF610_REG_ADC_HC0); 779 780 return 0; 781 } 782 783 static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = { 784 .postenable = &vf610_adc_buffer_postenable, 785 .predisable = &vf610_adc_buffer_predisable, 786 .validate_scan_mask = &iio_validate_scan_mask_onehot, 787 }; 788 789 static int vf610_adc_reg_access(struct iio_dev *indio_dev, 790 unsigned reg, unsigned writeval, 791 unsigned *readval) 792 { 793 struct vf610_adc *info = iio_priv(indio_dev); 794 795 if ((readval == NULL) || 796 ((reg % 4) || (reg > VF610_REG_ADC_PCTL))) 797 return -EINVAL; 798 799 *readval = readl(info->regs + reg); 800 801 return 0; 802 } 803 804 static const struct iio_info vf610_adc_iio_info = { 805 .read_raw = &vf610_read_raw, 806 .write_raw = &vf610_write_raw, 807 .debugfs_reg_access = &vf610_adc_reg_access, 808 .attrs = &vf610_attribute_group, 809 }; 810 811 static const struct of_device_id vf610_adc_match[] = { 812 { .compatible = "fsl,vf610-adc", }, 813 { /* sentinel */ } 814 }; 815 MODULE_DEVICE_TABLE(of, vf610_adc_match); 816 817 static int vf610_adc_probe(struct platform_device *pdev) 818 { 819 struct device *dev = &pdev->dev; 820 struct vf610_adc *info; 821 struct iio_dev *indio_dev; 822 int irq; 823 int ret; 824 825 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct vf610_adc)); 826 if (!indio_dev) { 827 dev_err(&pdev->dev, "Failed allocating iio device\n"); 828 return -ENOMEM; 829 } 830 831 info = iio_priv(indio_dev); 832 info->dev = &pdev->dev; 833 834 info->regs = devm_platform_ioremap_resource(pdev, 0); 835 if (IS_ERR(info->regs)) 836 return PTR_ERR(info->regs); 837 838 irq = platform_get_irq(pdev, 0); 839 if (irq < 0) 840 return irq; 841 842 ret = devm_request_irq(info->dev, irq, 843 vf610_adc_isr, 0, 844 dev_name(&pdev->dev), indio_dev); 845 if (ret < 0) { 846 dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", irq); 847 return ret; 848 } 849 850 info->clk = devm_clk_get(&pdev->dev, "adc"); 851 if (IS_ERR(info->clk)) { 852 dev_err(&pdev->dev, "failed getting clock, err = %ld\n", 853 PTR_ERR(info->clk)); 854 return PTR_ERR(info->clk); 855 } 856 857 info->vref = devm_regulator_get(&pdev->dev, "vref"); 858 if (IS_ERR(info->vref)) 859 return PTR_ERR(info->vref); 860 861 ret = regulator_enable(info->vref); 862 if (ret) 863 return ret; 864 865 info->vref_uv = regulator_get_voltage(info->vref); 866 867 device_property_read_u32_array(dev, "fsl,adck-max-frequency", info->max_adck_rate, 3); 868 869 info->adc_feature.default_sample_time = DEFAULT_SAMPLE_TIME; 870 device_property_read_u32(dev, "min-sample-time", &info->adc_feature.default_sample_time); 871 872 platform_set_drvdata(pdev, indio_dev); 873 874 init_completion(&info->completion); 875 876 indio_dev->name = dev_name(&pdev->dev); 877 indio_dev->info = &vf610_adc_iio_info; 878 indio_dev->modes = INDIO_DIRECT_MODE; 879 indio_dev->channels = vf610_adc_iio_channels; 880 indio_dev->num_channels = ARRAY_SIZE(vf610_adc_iio_channels); 881 882 ret = clk_prepare_enable(info->clk); 883 if (ret) { 884 dev_err(&pdev->dev, 885 "Could not prepare or enable the clock.\n"); 886 goto error_adc_clk_enable; 887 } 888 889 vf610_adc_cfg_init(info); 890 vf610_adc_hw_init(info); 891 892 ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, 893 NULL, &iio_triggered_buffer_setup_ops); 894 if (ret < 0) { 895 dev_err(&pdev->dev, "Couldn't initialise the buffer\n"); 896 goto error_iio_device_register; 897 } 898 899 mutex_init(&info->lock); 900 901 ret = iio_device_register(indio_dev); 902 if (ret) { 903 dev_err(&pdev->dev, "Couldn't register the device.\n"); 904 goto error_adc_buffer_init; 905 } 906 907 return 0; 908 909 error_adc_buffer_init: 910 iio_triggered_buffer_cleanup(indio_dev); 911 error_iio_device_register: 912 clk_disable_unprepare(info->clk); 913 error_adc_clk_enable: 914 regulator_disable(info->vref); 915 916 return ret; 917 } 918 919 static void vf610_adc_remove(struct platform_device *pdev) 920 { 921 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 922 struct vf610_adc *info = iio_priv(indio_dev); 923 924 iio_device_unregister(indio_dev); 925 iio_triggered_buffer_cleanup(indio_dev); 926 regulator_disable(info->vref); 927 clk_disable_unprepare(info->clk); 928 } 929 930 static int vf610_adc_suspend(struct device *dev) 931 { 932 struct iio_dev *indio_dev = dev_get_drvdata(dev); 933 struct vf610_adc *info = iio_priv(indio_dev); 934 int hc_cfg; 935 936 /* ADC controller enters to stop mode */ 937 hc_cfg = readl(info->regs + VF610_REG_ADC_HC0); 938 hc_cfg |= VF610_ADC_CONV_DISABLE; 939 writel(hc_cfg, info->regs + VF610_REG_ADC_HC0); 940 941 clk_disable_unprepare(info->clk); 942 regulator_disable(info->vref); 943 944 return 0; 945 } 946 947 static int vf610_adc_resume(struct device *dev) 948 { 949 struct iio_dev *indio_dev = dev_get_drvdata(dev); 950 struct vf610_adc *info = iio_priv(indio_dev); 951 int ret; 952 953 ret = regulator_enable(info->vref); 954 if (ret) 955 return ret; 956 957 ret = clk_prepare_enable(info->clk); 958 if (ret) 959 goto disable_reg; 960 961 vf610_adc_hw_init(info); 962 963 return 0; 964 965 disable_reg: 966 regulator_disable(info->vref); 967 return ret; 968 } 969 970 static DEFINE_SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend, 971 vf610_adc_resume); 972 973 static struct platform_driver vf610_adc_driver = { 974 .probe = vf610_adc_probe, 975 .remove_new = vf610_adc_remove, 976 .driver = { 977 .name = DRIVER_NAME, 978 .of_match_table = vf610_adc_match, 979 .pm = pm_sleep_ptr(&vf610_adc_pm_ops), 980 }, 981 }; 982 983 module_platform_driver(vf610_adc_driver); 984 985 MODULE_AUTHOR("Fugang Duan <B38611@freescale.com>"); 986 MODULE_DESCRIPTION("Freescale VF610 ADC driver"); 987 MODULE_LICENSE("GPL v2"); 988