1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de> 4 * 5 * This is the driver for the imx25 GCQ (Generic Conversion Queue) 6 * connected to the imx25 ADC. 7 */ 8 9 #include <dt-bindings/iio/adc/fsl-imx25-gcq.h> 10 #include <linux/clk.h> 11 #include <linux/iio/iio.h> 12 #include <linux/interrupt.h> 13 #include <linux/mfd/imx25-tsadc.h> 14 #include <linux/module.h> 15 #include <linux/of.h> 16 #include <linux/platform_device.h> 17 #include <linux/regmap.h> 18 #include <linux/regulator/consumer.h> 19 20 #define MX25_GCQ_TIMEOUT (msecs_to_jiffies(2000)) 21 22 static const char * const driver_name = "mx25-gcq"; 23 24 enum mx25_gcq_cfgs { 25 MX25_CFG_XP = 0, 26 MX25_CFG_YP, 27 MX25_CFG_XN, 28 MX25_CFG_YN, 29 MX25_CFG_WIPER, 30 MX25_CFG_INAUX0, 31 MX25_CFG_INAUX1, 32 MX25_CFG_INAUX2, 33 MX25_NUM_CFGS, 34 }; 35 36 struct mx25_gcq_priv { 37 struct regmap *regs; 38 struct completion completed; 39 struct clk *clk; 40 int irq; 41 struct regulator *vref[4]; 42 u32 channel_vref_mv[MX25_NUM_CFGS]; 43 /* 44 * Lock to protect the device state during a potential concurrent 45 * read access from userspace. Reading a raw value requires a sequence 46 * of register writes, then a wait for a completion callback, 47 * and finally a register read, during which userspace could issue 48 * another read request. This lock protects a read access from 49 * ocurring before another one has finished. 50 */ 51 struct mutex lock; 52 }; 53 54 #define MX25_CQG_CHAN(chan, id) {\ 55 .type = IIO_VOLTAGE,\ 56 .indexed = 1,\ 57 .channel = chan,\ 58 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ 59 BIT(IIO_CHAN_INFO_SCALE),\ 60 .datasheet_name = id,\ 61 } 62 63 static const struct iio_chan_spec mx25_gcq_channels[MX25_NUM_CFGS] = { 64 MX25_CQG_CHAN(MX25_CFG_XP, "xp"), 65 MX25_CQG_CHAN(MX25_CFG_YP, "yp"), 66 MX25_CQG_CHAN(MX25_CFG_XN, "xn"), 67 MX25_CQG_CHAN(MX25_CFG_YN, "yn"), 68 MX25_CQG_CHAN(MX25_CFG_WIPER, "wiper"), 69 MX25_CQG_CHAN(MX25_CFG_INAUX0, "inaux0"), 70 MX25_CQG_CHAN(MX25_CFG_INAUX1, "inaux1"), 71 MX25_CQG_CHAN(MX25_CFG_INAUX2, "inaux2"), 72 }; 73 74 static const char * const mx25_gcq_refp_names[] = { 75 [MX25_ADC_REFP_YP] = "yp", 76 [MX25_ADC_REFP_XP] = "xp", 77 [MX25_ADC_REFP_INT] = "int", 78 [MX25_ADC_REFP_EXT] = "ext", 79 }; 80 81 static irqreturn_t mx25_gcq_irq(int irq, void *data) 82 { 83 struct mx25_gcq_priv *priv = data; 84 u32 stats; 85 86 regmap_read(priv->regs, MX25_ADCQ_SR, &stats); 87 88 if (stats & MX25_ADCQ_SR_EOQ) { 89 regmap_update_bits(priv->regs, MX25_ADCQ_MR, 90 MX25_ADCQ_MR_EOQ_IRQ, MX25_ADCQ_MR_EOQ_IRQ); 91 complete(&priv->completed); 92 } 93 94 /* Disable conversion queue run */ 95 regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, 0); 96 97 /* Acknowledge all possible irqs */ 98 regmap_write(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_FRR | 99 MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR | 100 MX25_ADCQ_SR_EOQ | MX25_ADCQ_SR_PD); 101 102 return IRQ_HANDLED; 103 } 104 105 static int mx25_gcq_get_raw_value(struct device *dev, 106 struct iio_chan_spec const *chan, 107 struct mx25_gcq_priv *priv, 108 int *val) 109 { 110 long timeout; 111 u32 data; 112 113 /* Setup the configuration we want to use */ 114 regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0, 115 MX25_ADCQ_ITEM(0, chan->channel)); 116 117 regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_EOQ_IRQ, 0); 118 119 /* Trigger queue for one run */ 120 regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, 121 MX25_ADCQ_CR_FQS); 122 123 timeout = wait_for_completion_interruptible_timeout( 124 &priv->completed, MX25_GCQ_TIMEOUT); 125 if (timeout < 0) { 126 dev_err(dev, "ADC wait for measurement failed\n"); 127 return timeout; 128 } else if (timeout == 0) { 129 dev_err(dev, "ADC timed out\n"); 130 return -ETIMEDOUT; 131 } 132 133 regmap_read(priv->regs, MX25_ADCQ_FIFO, &data); 134 135 *val = MX25_ADCQ_FIFO_DATA(data); 136 137 return IIO_VAL_INT; 138 } 139 140 static int mx25_gcq_read_raw(struct iio_dev *indio_dev, 141 struct iio_chan_spec const *chan, int *val, 142 int *val2, long mask) 143 { 144 struct mx25_gcq_priv *priv = iio_priv(indio_dev); 145 int ret; 146 147 switch (mask) { 148 case IIO_CHAN_INFO_RAW: 149 mutex_lock(&priv->lock); 150 ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val); 151 mutex_unlock(&priv->lock); 152 return ret; 153 154 case IIO_CHAN_INFO_SCALE: 155 *val = priv->channel_vref_mv[chan->channel]; 156 *val2 = 12; 157 return IIO_VAL_FRACTIONAL_LOG2; 158 159 default: 160 return -EINVAL; 161 } 162 } 163 164 static const struct iio_info mx25_gcq_iio_info = { 165 .read_raw = mx25_gcq_read_raw, 166 }; 167 168 static const struct regmap_config mx25_gcq_regconfig = { 169 .max_register = 0x5c, 170 .reg_bits = 32, 171 .val_bits = 32, 172 .reg_stride = 4, 173 }; 174 175 static int mx25_gcq_setup_cfgs(struct platform_device *pdev, 176 struct mx25_gcq_priv *priv) 177 { 178 struct device_node *np = pdev->dev.of_node; 179 struct device_node *child; 180 struct device *dev = &pdev->dev; 181 unsigned int refp_used[4] = {}; 182 int ret, i; 183 184 /* 185 * Setup all configurations registers with a default conversion 186 * configuration for each input 187 */ 188 for (i = 0; i < MX25_NUM_CFGS; ++i) 189 regmap_write(priv->regs, MX25_ADCQ_CFG(i), 190 MX25_ADCQ_CFG_YPLL_OFF | 191 MX25_ADCQ_CFG_XNUR_OFF | 192 MX25_ADCQ_CFG_XPUL_OFF | 193 MX25_ADCQ_CFG_REFP_INT | 194 MX25_ADCQ_CFG_IN(i) | 195 MX25_ADCQ_CFG_REFN_NGND2); 196 197 /* 198 * First get all regulators to store them in channel_vref_mv if 199 * necessary. Later we use that information for proper IIO scale 200 * information. 201 */ 202 priv->vref[MX25_ADC_REFP_INT] = NULL; 203 priv->vref[MX25_ADC_REFP_EXT] = 204 devm_regulator_get_optional(&pdev->dev, "vref-ext"); 205 priv->vref[MX25_ADC_REFP_XP] = 206 devm_regulator_get_optional(&pdev->dev, "vref-xp"); 207 priv->vref[MX25_ADC_REFP_YP] = 208 devm_regulator_get_optional(&pdev->dev, "vref-yp"); 209 210 for_each_child_of_node(np, child) { 211 u32 reg; 212 u32 refp = MX25_ADCQ_CFG_REFP_INT; 213 u32 refn = MX25_ADCQ_CFG_REFN_NGND2; 214 215 ret = of_property_read_u32(child, "reg", ®); 216 if (ret) { 217 dev_err(dev, "Failed to get reg property\n"); 218 of_node_put(child); 219 return ret; 220 } 221 222 if (reg >= MX25_NUM_CFGS) { 223 dev_err(dev, 224 "reg value is greater than the number of available configuration registers\n"); 225 of_node_put(child); 226 return -EINVAL; 227 } 228 229 of_property_read_u32(child, "fsl,adc-refp", &refp); 230 of_property_read_u32(child, "fsl,adc-refn", &refn); 231 232 switch (refp) { 233 case MX25_ADC_REFP_EXT: 234 case MX25_ADC_REFP_XP: 235 case MX25_ADC_REFP_YP: 236 if (IS_ERR(priv->vref[refp])) { 237 dev_err(dev, "Error, trying to use external voltage reference without a vref-%s regulator.", 238 mx25_gcq_refp_names[refp]); 239 of_node_put(child); 240 return PTR_ERR(priv->vref[refp]); 241 } 242 priv->channel_vref_mv[reg] = 243 regulator_get_voltage(priv->vref[refp]); 244 /* Conversion from uV to mV */ 245 priv->channel_vref_mv[reg] /= 1000; 246 break; 247 case MX25_ADC_REFP_INT: 248 priv->channel_vref_mv[reg] = 2500; 249 break; 250 default: 251 dev_err(dev, "Invalid positive reference %d\n", refp); 252 of_node_put(child); 253 return -EINVAL; 254 } 255 256 ++refp_used[refp]; 257 258 /* 259 * Shift the read values to the correct positions within the 260 * register. 261 */ 262 refp = MX25_ADCQ_CFG_REFP(refp); 263 refn = MX25_ADCQ_CFG_REFN(refn); 264 265 if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) { 266 dev_err(dev, "Invalid fsl,adc-refp property value\n"); 267 of_node_put(child); 268 return -EINVAL; 269 } 270 if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) { 271 dev_err(dev, "Invalid fsl,adc-refn property value\n"); 272 of_node_put(child); 273 return -EINVAL; 274 } 275 276 regmap_update_bits(priv->regs, MX25_ADCQ_CFG(reg), 277 MX25_ADCQ_CFG_REFP_MASK | 278 MX25_ADCQ_CFG_REFN_MASK, 279 refp | refn); 280 } 281 regmap_update_bits(priv->regs, MX25_ADCQ_CR, 282 MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST, 283 MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST); 284 285 regmap_write(priv->regs, MX25_ADCQ_CR, 286 MX25_ADCQ_CR_PDMSK | MX25_ADCQ_CR_QSM_FQS); 287 288 /* Remove unused regulators */ 289 for (i = 0; i != 4; ++i) { 290 if (!refp_used[i]) { 291 if (!IS_ERR_OR_NULL(priv->vref[i])) 292 devm_regulator_put(priv->vref[i]); 293 priv->vref[i] = NULL; 294 } 295 } 296 297 return 0; 298 } 299 300 static int mx25_gcq_probe(struct platform_device *pdev) 301 { 302 struct iio_dev *indio_dev; 303 struct mx25_gcq_priv *priv; 304 struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent); 305 struct device *dev = &pdev->dev; 306 void __iomem *mem; 307 int ret; 308 int i; 309 310 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv)); 311 if (!indio_dev) 312 return -ENOMEM; 313 314 priv = iio_priv(indio_dev); 315 316 mem = devm_platform_ioremap_resource(pdev, 0); 317 if (IS_ERR(mem)) 318 return PTR_ERR(mem); 319 320 priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig); 321 if (IS_ERR(priv->regs)) { 322 dev_err(dev, "Failed to initialize regmap\n"); 323 return PTR_ERR(priv->regs); 324 } 325 326 mutex_init(&priv->lock); 327 328 init_completion(&priv->completed); 329 330 ret = mx25_gcq_setup_cfgs(pdev, priv); 331 if (ret) 332 return ret; 333 334 for (i = 0; i != 4; ++i) { 335 if (!priv->vref[i]) 336 continue; 337 338 ret = regulator_enable(priv->vref[i]); 339 if (ret) 340 goto err_regulator_disable; 341 } 342 343 priv->clk = tsadc->clk; 344 ret = clk_prepare_enable(priv->clk); 345 if (ret) { 346 dev_err(dev, "Failed to enable clock\n"); 347 goto err_vref_disable; 348 } 349 350 priv->irq = platform_get_irq(pdev, 0); 351 if (priv->irq <= 0) { 352 ret = priv->irq; 353 if (!ret) 354 ret = -ENXIO; 355 goto err_clk_unprepare; 356 } 357 358 ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv); 359 if (ret) { 360 dev_err(dev, "Failed requesting IRQ\n"); 361 goto err_clk_unprepare; 362 } 363 364 indio_dev->channels = mx25_gcq_channels; 365 indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels); 366 indio_dev->info = &mx25_gcq_iio_info; 367 indio_dev->name = driver_name; 368 369 ret = iio_device_register(indio_dev); 370 if (ret) { 371 dev_err(dev, "Failed to register iio device\n"); 372 goto err_irq_free; 373 } 374 375 platform_set_drvdata(pdev, indio_dev); 376 377 return 0; 378 379 err_irq_free: 380 free_irq(priv->irq, priv); 381 err_clk_unprepare: 382 clk_disable_unprepare(priv->clk); 383 err_vref_disable: 384 i = 4; 385 err_regulator_disable: 386 for (; i-- > 0;) { 387 if (priv->vref[i]) 388 regulator_disable(priv->vref[i]); 389 } 390 return ret; 391 } 392 393 static int mx25_gcq_remove(struct platform_device *pdev) 394 { 395 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 396 struct mx25_gcq_priv *priv = iio_priv(indio_dev); 397 int i; 398 399 iio_device_unregister(indio_dev); 400 free_irq(priv->irq, priv); 401 clk_disable_unprepare(priv->clk); 402 for (i = 4; i-- > 0;) { 403 if (priv->vref[i]) 404 regulator_disable(priv->vref[i]); 405 } 406 407 return 0; 408 } 409 410 static const struct of_device_id mx25_gcq_ids[] = { 411 { .compatible = "fsl,imx25-gcq", }, 412 { /* Sentinel */ } 413 }; 414 MODULE_DEVICE_TABLE(of, mx25_gcq_ids); 415 416 static struct platform_driver mx25_gcq_driver = { 417 .driver = { 418 .name = "mx25-gcq", 419 .of_match_table = mx25_gcq_ids, 420 }, 421 .probe = mx25_gcq_probe, 422 .remove = mx25_gcq_remove, 423 }; 424 module_platform_driver(mx25_gcq_driver); 425 426 MODULE_DESCRIPTION("ADC driver for Freescale mx25"); 427 MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>"); 428 MODULE_LICENSE("GPL v2"); 429