1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver 4 * 5 * Copyright (C) 2014 Intel Corporation 6 * 7 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 8 */ 9 10 #include <linux/dmi.h> 11 #include <linux/module.h> 12 #include <linux/mutex.h> 13 #include <linux/kernel.h> 14 #include <linux/device.h> 15 #include <linux/regmap.h> 16 #include <linux/mfd/axp20x.h> 17 #include <linux/platform_device.h> 18 19 #include <linux/iio/iio.h> 20 #include <linux/iio/machine.h> 21 #include <linux/iio/driver.h> 22 23 /* 24 * This mask enables all ADCs except for the battery temp-sensor (TS), that is 25 * left as-is to avoid breaking charging on devices without a temp-sensor. 26 */ 27 #define AXP288_ADC_EN_MASK 0xF0 28 #define AXP288_ADC_TS_ENABLE 0x01 29 30 #define AXP288_ADC_TS_BIAS_MASK GENMASK(5, 4) 31 #define AXP288_ADC_TS_BIAS_20UA (0 << 4) 32 #define AXP288_ADC_TS_BIAS_40UA (1 << 4) 33 #define AXP288_ADC_TS_BIAS_60UA (2 << 4) 34 #define AXP288_ADC_TS_BIAS_80UA (3 << 4) 35 #define AXP288_ADC_TS_CURRENT_ON_OFF_MASK GENMASK(1, 0) 36 #define AXP288_ADC_TS_CURRENT_OFF (0 << 0) 37 #define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING (1 << 0) 38 #define AXP288_ADC_TS_CURRENT_ON_ONDEMAND (2 << 0) 39 #define AXP288_ADC_TS_CURRENT_ON (3 << 0) 40 41 enum axp288_adc_id { 42 AXP288_ADC_TS, 43 AXP288_ADC_PMIC, 44 AXP288_ADC_GP, 45 AXP288_ADC_BATT_CHRG_I, 46 AXP288_ADC_BATT_DISCHRG_I, 47 AXP288_ADC_BATT_V, 48 AXP288_ADC_NR_CHAN, 49 }; 50 51 struct axp288_adc_info { 52 int irq; 53 struct regmap *regmap; 54 /* lock to protect against multiple access to the device */ 55 struct mutex lock; 56 bool ts_enabled; 57 }; 58 59 static const struct iio_chan_spec axp288_adc_channels[] = { 60 { 61 .indexed = 1, 62 .type = IIO_TEMP, 63 .channel = 0, 64 .address = AXP288_TS_ADC_H, 65 .datasheet_name = "TS_PIN", 66 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 67 }, { 68 .indexed = 1, 69 .type = IIO_TEMP, 70 .channel = 1, 71 .address = AXP288_PMIC_ADC_H, 72 .datasheet_name = "PMIC_TEMP", 73 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 74 }, { 75 .indexed = 1, 76 .type = IIO_TEMP, 77 .channel = 2, 78 .address = AXP288_GP_ADC_H, 79 .datasheet_name = "GPADC", 80 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 81 }, { 82 .indexed = 1, 83 .type = IIO_CURRENT, 84 .channel = 3, 85 .address = AXP20X_BATT_CHRG_I_H, 86 .datasheet_name = "BATT_CHG_I", 87 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 88 }, { 89 .indexed = 1, 90 .type = IIO_CURRENT, 91 .channel = 4, 92 .address = AXP20X_BATT_DISCHRG_I_H, 93 .datasheet_name = "BATT_DISCHRG_I", 94 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 95 }, { 96 .indexed = 1, 97 .type = IIO_VOLTAGE, 98 .channel = 5, 99 .address = AXP20X_BATT_V_H, 100 .datasheet_name = "BATT_V", 101 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 102 }, 103 }; 104 105 /* for consumer drivers */ 106 static struct iio_map axp288_adc_default_maps[] = { 107 IIO_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"), 108 IIO_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"), 109 IIO_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"), 110 IIO_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"), 111 IIO_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"), 112 IIO_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"), 113 {}, 114 }; 115 116 static int axp288_adc_read_channel(int *val, unsigned long address, 117 struct regmap *regmap) 118 { 119 u8 buf[2]; 120 121 if (regmap_bulk_read(regmap, address, buf, 2)) 122 return -EIO; 123 *val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F); 124 125 return IIO_VAL_INT; 126 } 127 128 /* 129 * The current-source used for the battery temp-sensor (TS) is shared 130 * with the GPADC. For proper fuel-gauge and charger operation the TS 131 * current-source needs to be permanently on. But to read the GPADC we 132 * need to temporary switch the TS current-source to ondemand, so that 133 * the GPADC can use it, otherwise we will always read an all 0 value. 134 */ 135 static int axp288_adc_set_ts(struct axp288_adc_info *info, 136 unsigned int mode, unsigned long address) 137 { 138 int ret; 139 140 /* No need to switch the current-source if the TS pin is disabled */ 141 if (!info->ts_enabled) 142 return 0; 143 144 /* Channels other than GPADC do not need the current source */ 145 if (address != AXP288_GP_ADC_H) 146 return 0; 147 148 ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL, 149 AXP288_ADC_TS_CURRENT_ON_OFF_MASK, mode); 150 if (ret) 151 return ret; 152 153 /* When switching to the GPADC pin give things some time to settle */ 154 if (mode == AXP288_ADC_TS_CURRENT_ON_ONDEMAND) 155 usleep_range(6000, 10000); 156 157 return 0; 158 } 159 160 static int axp288_adc_read_raw(struct iio_dev *indio_dev, 161 struct iio_chan_spec const *chan, 162 int *val, int *val2, long mask) 163 { 164 int ret; 165 struct axp288_adc_info *info = iio_priv(indio_dev); 166 167 mutex_lock(&info->lock); 168 switch (mask) { 169 case IIO_CHAN_INFO_RAW: 170 if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON_ONDEMAND, 171 chan->address)) { 172 dev_err(&indio_dev->dev, "GPADC mode\n"); 173 ret = -EINVAL; 174 break; 175 } 176 ret = axp288_adc_read_channel(val, chan->address, info->regmap); 177 if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON, 178 chan->address)) 179 dev_err(&indio_dev->dev, "TS pin restore\n"); 180 break; 181 default: 182 ret = -EINVAL; 183 } 184 mutex_unlock(&info->lock); 185 186 return ret; 187 } 188 189 /* 190 * We rely on the machine's firmware to correctly setup the TS pin bias current 191 * at boot. This lists systems with broken fw where we need to set it ourselves. 192 */ 193 static const struct dmi_system_id axp288_adc_ts_bias_override[] = { 194 { 195 /* Lenovo Ideapad 100S (11 inch) */ 196 .matches = { 197 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), 198 DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 100S-11IBY"), 199 }, 200 .driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA, 201 }, 202 { 203 /* Nuvision Solo 10 Draw */ 204 .matches = { 205 DMI_MATCH(DMI_SYS_VENDOR, "TMAX"), 206 DMI_MATCH(DMI_PRODUCT_NAME, "TM101W610L"), 207 }, 208 .driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA, 209 }, 210 {} 211 }; 212 213 static int axp288_adc_initialize(struct axp288_adc_info *info) 214 { 215 const struct dmi_system_id *bias_override; 216 int ret, adc_enable_val; 217 218 bias_override = dmi_first_match(axp288_adc_ts_bias_override); 219 if (bias_override) { 220 ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL, 221 AXP288_ADC_TS_BIAS_MASK, 222 (uintptr_t)bias_override->driver_data); 223 if (ret) 224 return ret; 225 } 226 227 /* 228 * Determine if the TS pin is enabled and set the TS current-source 229 * accordingly. 230 */ 231 ret = regmap_read(info->regmap, AXP20X_ADC_EN1, &adc_enable_val); 232 if (ret) 233 return ret; 234 235 if (adc_enable_val & AXP288_ADC_TS_ENABLE) { 236 info->ts_enabled = true; 237 ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL, 238 AXP288_ADC_TS_CURRENT_ON_OFF_MASK, 239 AXP288_ADC_TS_CURRENT_ON); 240 } else { 241 info->ts_enabled = false; 242 ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL, 243 AXP288_ADC_TS_CURRENT_ON_OFF_MASK, 244 AXP288_ADC_TS_CURRENT_OFF); 245 } 246 if (ret) 247 return ret; 248 249 /* Turn on the ADC for all channels except TS, leave TS as is */ 250 return regmap_set_bits(info->regmap, AXP20X_ADC_EN1, 251 AXP288_ADC_EN_MASK); 252 } 253 254 static const struct iio_info axp288_adc_iio_info = { 255 .read_raw = &axp288_adc_read_raw, 256 }; 257 258 static int axp288_adc_probe(struct platform_device *pdev) 259 { 260 int ret; 261 struct axp288_adc_info *info; 262 struct iio_dev *indio_dev; 263 struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); 264 265 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); 266 if (!indio_dev) 267 return -ENOMEM; 268 269 info = iio_priv(indio_dev); 270 info->irq = platform_get_irq(pdev, 0); 271 if (info->irq < 0) 272 return info->irq; 273 274 info->regmap = axp20x->regmap; 275 /* 276 * Set ADC to enabled state at all time, including system suspend. 277 * otherwise internal fuel gauge functionality may be affected. 278 */ 279 ret = axp288_adc_initialize(info); 280 if (ret) { 281 dev_err(&pdev->dev, "unable to enable ADC device\n"); 282 return ret; 283 } 284 285 indio_dev->name = pdev->name; 286 indio_dev->channels = axp288_adc_channels; 287 indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels); 288 indio_dev->info = &axp288_adc_iio_info; 289 indio_dev->modes = INDIO_DIRECT_MODE; 290 291 ret = devm_iio_map_array_register(&pdev->dev, indio_dev, axp288_adc_default_maps); 292 if (ret < 0) 293 return ret; 294 295 mutex_init(&info->lock); 296 297 return devm_iio_device_register(&pdev->dev, indio_dev); 298 } 299 300 static const struct platform_device_id axp288_adc_id_table[] = { 301 { .name = "axp288_adc" }, 302 {}, 303 }; 304 305 static struct platform_driver axp288_adc_driver = { 306 .probe = axp288_adc_probe, 307 .id_table = axp288_adc_id_table, 308 .driver = { 309 .name = "axp288_adc", 310 }, 311 }; 312 313 MODULE_DEVICE_TABLE(platform, axp288_adc_id_table); 314 315 module_platform_driver(axp288_adc_driver); 316 317 MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>"); 318 MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver"); 319 MODULE_LICENSE("GPL"); 320