1 /* 2 * Driver for the ADC present in the Atmel AT91 evaluation boards. 3 * 4 * Copyright 2011 Free Electrons 5 * 6 * Licensed under the GPLv2 or later. 7 */ 8 9 #include <linux/bitmap.h> 10 #include <linux/bitops.h> 11 #include <linux/clk.h> 12 #include <linux/err.h> 13 #include <linux/io.h> 14 #include <linux/input.h> 15 #include <linux/interrupt.h> 16 #include <linux/jiffies.h> 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_device.h> 21 #include <linux/platform_device.h> 22 #include <linux/sched.h> 23 #include <linux/slab.h> 24 #include <linux/wait.h> 25 26 #include <linux/platform_data/at91_adc.h> 27 28 #include <linux/iio/iio.h> 29 #include <linux/iio/buffer.h> 30 #include <linux/iio/trigger.h> 31 #include <linux/iio/trigger_consumer.h> 32 #include <linux/iio/triggered_buffer.h> 33 34 /* Registers */ 35 #define AT91_ADC_CR 0x00 /* Control Register */ 36 #define AT91_ADC_SWRST (1 << 0) /* Software Reset */ 37 #define AT91_ADC_START (1 << 1) /* Start Conversion */ 38 39 #define AT91_ADC_MR 0x04 /* Mode Register */ 40 #define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */ 41 #define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /* ADC Mode */ 42 #define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /* Touch Screen Only Mode */ 43 #define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ 44 #define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ 45 #define AT91_ADC_TRGSEL_TC0 (0 << 1) 46 #define AT91_ADC_TRGSEL_TC1 (1 << 1) 47 #define AT91_ADC_TRGSEL_TC2 (2 << 1) 48 #define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) 49 #define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ 50 #define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ 51 #define AT91_ADC_PENDET (1 << 6) /* Pen contact detection enable */ 52 #define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ 53 #define AT91_ADC_PRESCAL_9G45 (0xff << 8) 54 #define AT91_ADC_PRESCAL_(x) ((x) << 8) 55 #define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ 56 #define AT91_ADC_STARTUP_9G45 (0x7f << 16) 57 #define AT91_ADC_STARTUP_9X5 (0xf << 16) 58 #define AT91_ADC_STARTUP_(x) ((x) << 16) 59 #define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ 60 #define AT91_ADC_SHTIM_(x) ((x) << 24) 61 #define AT91_ADC_PENDBC (0x0f << 28) /* Pen Debounce time */ 62 #define AT91_ADC_PENDBC_(x) ((x) << 28) 63 64 #define AT91_ADC_TSR 0x0C 65 #define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample & Hold Time */ 66 #define AT91_ADC_TSR_SHTIM_(x) ((x) << 24) 67 68 #define AT91_ADC_CHER 0x10 /* Channel Enable Register */ 69 #define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ 70 #define AT91_ADC_CHSR 0x18 /* Channel Status Register */ 71 #define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ 72 73 #define AT91_ADC_SR 0x1C /* Status Register */ 74 #define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ 75 #define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ 76 #define AT91_ADC_DRDY (1 << 16) /* Data Ready */ 77 #define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ 78 #define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ 79 #define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ 80 81 #define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ 82 #define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ 83 84 #define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ 85 #define AT91_ADC_LDATA (0x3ff) 86 87 #define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ 88 #define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ 89 #define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ 90 #define AT91RL_ADC_IER_PEN (1 << 20) 91 #define AT91RL_ADC_IER_NOPEN (1 << 21) 92 #define AT91_ADC_IER_PEN (1 << 29) 93 #define AT91_ADC_IER_NOPEN (1 << 30) 94 #define AT91_ADC_IER_XRDY (1 << 20) 95 #define AT91_ADC_IER_YRDY (1 << 21) 96 #define AT91_ADC_IER_PRDY (1 << 22) 97 #define AT91_ADC_ISR_PENS (1 << 31) 98 99 #define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ 100 #define AT91_ADC_DATA (0x3ff) 101 102 #define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ 103 104 #define AT91_ADC_ACR 0x94 /* Analog Control Register */ 105 #define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ 106 107 #define AT91_ADC_TSMR 0xB0 108 #define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ 109 #define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) 110 #define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) 111 #define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) 112 #define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) 113 #define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ 114 #define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) 115 #define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ 116 #define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ 117 #define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) 118 #define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ 119 #define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ 120 #define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ 121 122 #define AT91_ADC_TSXPOSR 0xB4 123 #define AT91_ADC_TSYPOSR 0xB8 124 #define AT91_ADC_TSPRESSR 0xBC 125 126 #define AT91_ADC_TRGR_9260 AT91_ADC_MR 127 #define AT91_ADC_TRGR_9G45 0x08 128 #define AT91_ADC_TRGR_9X5 0xC0 129 130 /* Trigger Register bit field */ 131 #define AT91_ADC_TRGR_TRGPER (0xffff << 16) 132 #define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) 133 #define AT91_ADC_TRGR_TRGMOD (0x7 << 0) 134 #define AT91_ADC_TRGR_NONE (0 << 0) 135 #define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) 136 137 #define AT91_ADC_CHAN(st, ch) \ 138 (st->registers->channel_base + (ch * 4)) 139 #define at91_adc_readl(st, reg) \ 140 (readl_relaxed(st->reg_base + reg)) 141 #define at91_adc_writel(st, reg, val) \ 142 (writel_relaxed(val, st->reg_base + reg)) 143 144 #define DRIVER_NAME "at91_adc" 145 #define MAX_POS_BITS 12 146 147 #define TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */ 148 #define TOUCH_PEN_DETECT_DEBOUNCE_US 200 149 150 #define MAX_RLPOS_BITS 10 151 #define TOUCH_SAMPLE_PERIOD_US_RL 10000 /* 10ms, the SoC can't keep up with 2ms */ 152 #define TOUCH_SHTIM 0xa 153 154 /** 155 * struct at91_adc_reg_desc - Various informations relative to registers 156 * @channel_base: Base offset for the channel data registers 157 * @drdy_mask: Mask of the DRDY field in the relevant registers 158 (Interruptions registers mostly) 159 * @status_register: Offset of the Interrupt Status Register 160 * @trigger_register: Offset of the Trigger setup register 161 * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register 162 * @mr_startup_mask: Mask of the STARTUP field in the adc MR register 163 */ 164 struct at91_adc_reg_desc { 165 u8 channel_base; 166 u32 drdy_mask; 167 u8 status_register; 168 u8 trigger_register; 169 u32 mr_prescal_mask; 170 u32 mr_startup_mask; 171 }; 172 173 struct at91_adc_caps { 174 bool has_ts; /* Support touch screen */ 175 bool has_tsmr; /* only at91sam9x5, sama5d3 have TSMR reg */ 176 /* 177 * Numbers of sampling data will be averaged. Can be 0~3. 178 * Hardware can average (2 ^ ts_filter_average) sample data. 179 */ 180 u8 ts_filter_average; 181 /* Pen Detection input pull-up resistor, can be 0~3 */ 182 u8 ts_pen_detect_sensitivity; 183 184 /* startup time calculate function */ 185 u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz); 186 187 u8 num_channels; 188 struct at91_adc_reg_desc registers; 189 }; 190 191 struct at91_adc_state { 192 struct clk *adc_clk; 193 u16 *buffer; 194 unsigned long channels_mask; 195 struct clk *clk; 196 bool done; 197 int irq; 198 u16 last_value; 199 int chnb; 200 struct mutex lock; 201 u8 num_channels; 202 void __iomem *reg_base; 203 struct at91_adc_reg_desc *registers; 204 u8 startup_time; 205 u8 sample_hold_time; 206 bool sleep_mode; 207 struct iio_trigger **trig; 208 struct at91_adc_trigger *trigger_list; 209 u32 trigger_number; 210 bool use_external; 211 u32 vref_mv; 212 u32 res; /* resolution used for convertions */ 213 bool low_res; /* the resolution corresponds to the lowest one */ 214 wait_queue_head_t wq_data_avail; 215 struct at91_adc_caps *caps; 216 217 /* 218 * Following ADC channels are shared by touchscreen: 219 * 220 * CH0 -- Touch screen XP/UL 221 * CH1 -- Touch screen XM/UR 222 * CH2 -- Touch screen YP/LL 223 * CH3 -- Touch screen YM/Sense 224 * CH4 -- Touch screen LR(5-wire only) 225 * 226 * The bitfields below represents the reserved channel in the 227 * touchscreen mode. 228 */ 229 #define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 0) 230 #define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 0) 231 enum atmel_adc_ts_type touchscreen_type; 232 struct input_dev *ts_input; 233 234 u16 ts_sample_period_val; 235 u32 ts_pressure_threshold; 236 u16 ts_pendbc; 237 238 bool ts_bufferedmeasure; 239 u32 ts_prev_absx; 240 u32 ts_prev_absy; 241 }; 242 243 static irqreturn_t at91_adc_trigger_handler(int irq, void *p) 244 { 245 struct iio_poll_func *pf = p; 246 struct iio_dev *idev = pf->indio_dev; 247 struct at91_adc_state *st = iio_priv(idev); 248 int i, j = 0; 249 250 for (i = 0; i < idev->masklength; i++) { 251 if (!test_bit(i, idev->active_scan_mask)) 252 continue; 253 st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, i)); 254 j++; 255 } 256 257 iio_push_to_buffers_with_timestamp(idev, st->buffer, pf->timestamp); 258 259 iio_trigger_notify_done(idev->trig); 260 261 /* Needed to ACK the DRDY interruption */ 262 at91_adc_readl(st, AT91_ADC_LCDR); 263 264 enable_irq(st->irq); 265 266 return IRQ_HANDLED; 267 } 268 269 /* Handler for classic adc channel eoc trigger */ 270 static void handle_adc_eoc_trigger(int irq, struct iio_dev *idev) 271 { 272 struct at91_adc_state *st = iio_priv(idev); 273 274 if (iio_buffer_enabled(idev)) { 275 disable_irq_nosync(irq); 276 iio_trigger_poll(idev->trig); 277 } else { 278 st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb)); 279 st->done = true; 280 wake_up_interruptible(&st->wq_data_avail); 281 } 282 } 283 284 static int at91_ts_sample(struct at91_adc_state *st) 285 { 286 unsigned int xscale, yscale, reg, z1, z2; 287 unsigned int x, y, pres, xpos, ypos; 288 unsigned int rxp = 1; 289 unsigned int factor = 1000; 290 struct iio_dev *idev = iio_priv_to_dev(st); 291 292 unsigned int xyz_mask_bits = st->res; 293 unsigned int xyz_mask = (1 << xyz_mask_bits) - 1; 294 295 /* calculate position */ 296 /* x position = (x / xscale) * max, max = 2^MAX_POS_BITS - 1 */ 297 reg = at91_adc_readl(st, AT91_ADC_TSXPOSR); 298 xpos = reg & xyz_mask; 299 x = (xpos << MAX_POS_BITS) - xpos; 300 xscale = (reg >> 16) & xyz_mask; 301 if (xscale == 0) { 302 dev_err(&idev->dev, "Error: xscale == 0!\n"); 303 return -1; 304 } 305 x /= xscale; 306 307 /* y position = (y / yscale) * max, max = 2^MAX_POS_BITS - 1 */ 308 reg = at91_adc_readl(st, AT91_ADC_TSYPOSR); 309 ypos = reg & xyz_mask; 310 y = (ypos << MAX_POS_BITS) - ypos; 311 yscale = (reg >> 16) & xyz_mask; 312 if (yscale == 0) { 313 dev_err(&idev->dev, "Error: yscale == 0!\n"); 314 return -1; 315 } 316 y /= yscale; 317 318 /* calculate the pressure */ 319 reg = at91_adc_readl(st, AT91_ADC_TSPRESSR); 320 z1 = reg & xyz_mask; 321 z2 = (reg >> 16) & xyz_mask; 322 323 if (z1 != 0) 324 pres = rxp * (x * factor / 1024) * (z2 * factor / z1 - factor) 325 / factor; 326 else 327 pres = st->ts_pressure_threshold; /* no pen contacted */ 328 329 dev_dbg(&idev->dev, "xpos = %d, xscale = %d, ypos = %d, yscale = %d, z1 = %d, z2 = %d, press = %d\n", 330 xpos, xscale, ypos, yscale, z1, z2, pres); 331 332 if (pres < st->ts_pressure_threshold) { 333 dev_dbg(&idev->dev, "x = %d, y = %d, pressure = %d\n", 334 x, y, pres / factor); 335 input_report_abs(st->ts_input, ABS_X, x); 336 input_report_abs(st->ts_input, ABS_Y, y); 337 input_report_abs(st->ts_input, ABS_PRESSURE, pres); 338 input_report_key(st->ts_input, BTN_TOUCH, 1); 339 input_sync(st->ts_input); 340 } else { 341 dev_dbg(&idev->dev, "pressure too low: not reporting\n"); 342 } 343 344 return 0; 345 } 346 347 static irqreturn_t at91_adc_rl_interrupt(int irq, void *private) 348 { 349 struct iio_dev *idev = private; 350 struct at91_adc_state *st = iio_priv(idev); 351 u32 status = at91_adc_readl(st, st->registers->status_register); 352 unsigned int reg; 353 354 status &= at91_adc_readl(st, AT91_ADC_IMR); 355 if (status & GENMASK(st->num_channels - 1, 0)) 356 handle_adc_eoc_trigger(irq, idev); 357 358 if (status & AT91RL_ADC_IER_PEN) { 359 /* Disabling pen debounce is required to get a NOPEN irq */ 360 reg = at91_adc_readl(st, AT91_ADC_MR); 361 reg &= ~AT91_ADC_PENDBC; 362 at91_adc_writel(st, AT91_ADC_MR, reg); 363 364 at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN); 365 at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_NOPEN 366 | AT91_ADC_EOC(3)); 367 /* Set up period trigger for sampling */ 368 at91_adc_writel(st, st->registers->trigger_register, 369 AT91_ADC_TRGR_MOD_PERIOD_TRIG | 370 AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val)); 371 } else if (status & AT91RL_ADC_IER_NOPEN) { 372 reg = at91_adc_readl(st, AT91_ADC_MR); 373 reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC; 374 at91_adc_writel(st, AT91_ADC_MR, reg); 375 at91_adc_writel(st, st->registers->trigger_register, 376 AT91_ADC_TRGR_NONE); 377 378 at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_NOPEN 379 | AT91_ADC_EOC(3)); 380 at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN); 381 st->ts_bufferedmeasure = false; 382 input_report_key(st->ts_input, BTN_TOUCH, 0); 383 input_sync(st->ts_input); 384 } else if (status & AT91_ADC_EOC(3)) { 385 /* Conversion finished */ 386 if (st->ts_bufferedmeasure) { 387 /* 388 * Last measurement is always discarded, since it can 389 * be erroneous. 390 * Always report previous measurement 391 */ 392 input_report_abs(st->ts_input, ABS_X, st->ts_prev_absx); 393 input_report_abs(st->ts_input, ABS_Y, st->ts_prev_absy); 394 input_report_key(st->ts_input, BTN_TOUCH, 1); 395 input_sync(st->ts_input); 396 } else 397 st->ts_bufferedmeasure = true; 398 399 /* Now make new measurement */ 400 st->ts_prev_absx = at91_adc_readl(st, AT91_ADC_CHAN(st, 3)) 401 << MAX_RLPOS_BITS; 402 st->ts_prev_absx /= at91_adc_readl(st, AT91_ADC_CHAN(st, 2)); 403 404 st->ts_prev_absy = at91_adc_readl(st, AT91_ADC_CHAN(st, 1)) 405 << MAX_RLPOS_BITS; 406 st->ts_prev_absy /= at91_adc_readl(st, AT91_ADC_CHAN(st, 0)); 407 } 408 409 return IRQ_HANDLED; 410 } 411 412 static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private) 413 { 414 struct iio_dev *idev = private; 415 struct at91_adc_state *st = iio_priv(idev); 416 u32 status = at91_adc_readl(st, st->registers->status_register); 417 const uint32_t ts_data_irq_mask = 418 AT91_ADC_IER_XRDY | 419 AT91_ADC_IER_YRDY | 420 AT91_ADC_IER_PRDY; 421 422 if (status & GENMASK(st->num_channels - 1, 0)) 423 handle_adc_eoc_trigger(irq, idev); 424 425 if (status & AT91_ADC_IER_PEN) { 426 at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN); 427 at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_NOPEN | 428 ts_data_irq_mask); 429 /* Set up period trigger for sampling */ 430 at91_adc_writel(st, st->registers->trigger_register, 431 AT91_ADC_TRGR_MOD_PERIOD_TRIG | 432 AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val)); 433 } else if (status & AT91_ADC_IER_NOPEN) { 434 at91_adc_writel(st, st->registers->trigger_register, 0); 435 at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_NOPEN | 436 ts_data_irq_mask); 437 at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN); 438 439 input_report_key(st->ts_input, BTN_TOUCH, 0); 440 input_sync(st->ts_input); 441 } else if ((status & ts_data_irq_mask) == ts_data_irq_mask) { 442 /* Now all touchscreen data is ready */ 443 444 if (status & AT91_ADC_ISR_PENS) { 445 /* validate data by pen contact */ 446 at91_ts_sample(st); 447 } else { 448 /* triggered by event that is no pen contact, just read 449 * them to clean the interrupt and discard all. 450 */ 451 at91_adc_readl(st, AT91_ADC_TSXPOSR); 452 at91_adc_readl(st, AT91_ADC_TSYPOSR); 453 at91_adc_readl(st, AT91_ADC_TSPRESSR); 454 } 455 } 456 457 return IRQ_HANDLED; 458 } 459 460 static int at91_adc_channel_init(struct iio_dev *idev) 461 { 462 struct at91_adc_state *st = iio_priv(idev); 463 struct iio_chan_spec *chan_array, *timestamp; 464 int bit, idx = 0; 465 unsigned long rsvd_mask = 0; 466 467 /* If touchscreen is enable, then reserve the adc channels */ 468 if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE) 469 rsvd_mask = CHAN_MASK_TOUCHSCREEN_4WIRE; 470 else if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_5WIRE) 471 rsvd_mask = CHAN_MASK_TOUCHSCREEN_5WIRE; 472 473 /* set up the channel mask to reserve touchscreen channels */ 474 st->channels_mask &= ~rsvd_mask; 475 476 idev->num_channels = bitmap_weight(&st->channels_mask, 477 st->num_channels) + 1; 478 479 chan_array = devm_kzalloc(&idev->dev, 480 ((idev->num_channels + 1) * 481 sizeof(struct iio_chan_spec)), 482 GFP_KERNEL); 483 484 if (!chan_array) 485 return -ENOMEM; 486 487 for_each_set_bit(bit, &st->channels_mask, st->num_channels) { 488 struct iio_chan_spec *chan = chan_array + idx; 489 490 chan->type = IIO_VOLTAGE; 491 chan->indexed = 1; 492 chan->channel = bit; 493 chan->scan_index = idx; 494 chan->scan_type.sign = 'u'; 495 chan->scan_type.realbits = st->res; 496 chan->scan_type.storagebits = 16; 497 chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); 498 chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); 499 idx++; 500 } 501 timestamp = chan_array + idx; 502 503 timestamp->type = IIO_TIMESTAMP; 504 timestamp->channel = -1; 505 timestamp->scan_index = idx; 506 timestamp->scan_type.sign = 's'; 507 timestamp->scan_type.realbits = 64; 508 timestamp->scan_type.storagebits = 64; 509 510 idev->channels = chan_array; 511 return idev->num_channels; 512 } 513 514 static int at91_adc_get_trigger_value_by_name(struct iio_dev *idev, 515 struct at91_adc_trigger *triggers, 516 const char *trigger_name) 517 { 518 struct at91_adc_state *st = iio_priv(idev); 519 int i; 520 521 for (i = 0; i < st->trigger_number; i++) { 522 char *name = kasprintf(GFP_KERNEL, 523 "%s-dev%d-%s", 524 idev->name, 525 idev->id, 526 triggers[i].name); 527 if (!name) 528 return -ENOMEM; 529 530 if (strcmp(trigger_name, name) == 0) { 531 kfree(name); 532 if (triggers[i].value == 0) 533 return -EINVAL; 534 return triggers[i].value; 535 } 536 537 kfree(name); 538 } 539 540 return -EINVAL; 541 } 542 543 static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) 544 { 545 struct iio_dev *idev = iio_trigger_get_drvdata(trig); 546 struct at91_adc_state *st = iio_priv(idev); 547 struct at91_adc_reg_desc *reg = st->registers; 548 u32 status = at91_adc_readl(st, reg->trigger_register); 549 int value; 550 u8 bit; 551 552 value = at91_adc_get_trigger_value_by_name(idev, 553 st->trigger_list, 554 idev->trig->name); 555 if (value < 0) 556 return value; 557 558 if (state) { 559 st->buffer = kmalloc(idev->scan_bytes, GFP_KERNEL); 560 if (st->buffer == NULL) 561 return -ENOMEM; 562 563 at91_adc_writel(st, reg->trigger_register, 564 status | value); 565 566 for_each_set_bit(bit, idev->active_scan_mask, 567 st->num_channels) { 568 struct iio_chan_spec const *chan = idev->channels + bit; 569 at91_adc_writel(st, AT91_ADC_CHER, 570 AT91_ADC_CH(chan->channel)); 571 } 572 573 at91_adc_writel(st, AT91_ADC_IER, reg->drdy_mask); 574 575 } else { 576 at91_adc_writel(st, AT91_ADC_IDR, reg->drdy_mask); 577 578 at91_adc_writel(st, reg->trigger_register, 579 status & ~value); 580 581 for_each_set_bit(bit, idev->active_scan_mask, 582 st->num_channels) { 583 struct iio_chan_spec const *chan = idev->channels + bit; 584 at91_adc_writel(st, AT91_ADC_CHDR, 585 AT91_ADC_CH(chan->channel)); 586 } 587 kfree(st->buffer); 588 } 589 590 return 0; 591 } 592 593 static const struct iio_trigger_ops at91_adc_trigger_ops = { 594 .owner = THIS_MODULE, 595 .set_trigger_state = &at91_adc_configure_trigger, 596 }; 597 598 static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *idev, 599 struct at91_adc_trigger *trigger) 600 { 601 struct iio_trigger *trig; 602 int ret; 603 604 trig = iio_trigger_alloc("%s-dev%d-%s", idev->name, 605 idev->id, trigger->name); 606 if (trig == NULL) 607 return NULL; 608 609 trig->dev.parent = idev->dev.parent; 610 iio_trigger_set_drvdata(trig, idev); 611 trig->ops = &at91_adc_trigger_ops; 612 613 ret = iio_trigger_register(trig); 614 if (ret) 615 return NULL; 616 617 return trig; 618 } 619 620 static int at91_adc_trigger_init(struct iio_dev *idev) 621 { 622 struct at91_adc_state *st = iio_priv(idev); 623 int i, ret; 624 625 st->trig = devm_kzalloc(&idev->dev, 626 st->trigger_number * sizeof(*st->trig), 627 GFP_KERNEL); 628 629 if (st->trig == NULL) { 630 ret = -ENOMEM; 631 goto error_ret; 632 } 633 634 for (i = 0; i < st->trigger_number; i++) { 635 if (st->trigger_list[i].is_external && !(st->use_external)) 636 continue; 637 638 st->trig[i] = at91_adc_allocate_trigger(idev, 639 st->trigger_list + i); 640 if (st->trig[i] == NULL) { 641 dev_err(&idev->dev, 642 "Could not allocate trigger %d\n", i); 643 ret = -ENOMEM; 644 goto error_trigger; 645 } 646 } 647 648 return 0; 649 650 error_trigger: 651 for (i--; i >= 0; i--) { 652 iio_trigger_unregister(st->trig[i]); 653 iio_trigger_free(st->trig[i]); 654 } 655 error_ret: 656 return ret; 657 } 658 659 static void at91_adc_trigger_remove(struct iio_dev *idev) 660 { 661 struct at91_adc_state *st = iio_priv(idev); 662 int i; 663 664 for (i = 0; i < st->trigger_number; i++) { 665 iio_trigger_unregister(st->trig[i]); 666 iio_trigger_free(st->trig[i]); 667 } 668 } 669 670 static int at91_adc_buffer_init(struct iio_dev *idev) 671 { 672 return iio_triggered_buffer_setup(idev, &iio_pollfunc_store_time, 673 &at91_adc_trigger_handler, NULL); 674 } 675 676 static void at91_adc_buffer_remove(struct iio_dev *idev) 677 { 678 iio_triggered_buffer_cleanup(idev); 679 } 680 681 static int at91_adc_read_raw(struct iio_dev *idev, 682 struct iio_chan_spec const *chan, 683 int *val, int *val2, long mask) 684 { 685 struct at91_adc_state *st = iio_priv(idev); 686 int ret; 687 688 switch (mask) { 689 case IIO_CHAN_INFO_RAW: 690 mutex_lock(&st->lock); 691 692 st->chnb = chan->channel; 693 at91_adc_writel(st, AT91_ADC_CHER, 694 AT91_ADC_CH(chan->channel)); 695 at91_adc_writel(st, AT91_ADC_IER, BIT(chan->channel)); 696 at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_START); 697 698 ret = wait_event_interruptible_timeout(st->wq_data_avail, 699 st->done, 700 msecs_to_jiffies(1000)); 701 if (ret == 0) 702 ret = -ETIMEDOUT; 703 if (ret < 0) { 704 mutex_unlock(&st->lock); 705 return ret; 706 } 707 708 *val = st->last_value; 709 710 at91_adc_writel(st, AT91_ADC_CHDR, 711 AT91_ADC_CH(chan->channel)); 712 at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel)); 713 714 st->last_value = 0; 715 st->done = false; 716 mutex_unlock(&st->lock); 717 return IIO_VAL_INT; 718 719 case IIO_CHAN_INFO_SCALE: 720 *val = st->vref_mv; 721 *val2 = chan->scan_type.realbits; 722 return IIO_VAL_FRACTIONAL_LOG2; 723 default: 724 break; 725 } 726 return -EINVAL; 727 } 728 729 static int at91_adc_of_get_resolution(struct at91_adc_state *st, 730 struct platform_device *pdev) 731 { 732 struct iio_dev *idev = iio_priv_to_dev(st); 733 struct device_node *np = pdev->dev.of_node; 734 int count, i, ret = 0; 735 char *res_name, *s; 736 u32 *resolutions; 737 738 count = of_property_count_strings(np, "atmel,adc-res-names"); 739 if (count < 2) { 740 dev_err(&idev->dev, "You must specified at least two resolution names for " 741 "adc-res-names property in the DT\n"); 742 return count; 743 } 744 745 resolutions = kmalloc(count * sizeof(*resolutions), GFP_KERNEL); 746 if (!resolutions) 747 return -ENOMEM; 748 749 if (of_property_read_u32_array(np, "atmel,adc-res", resolutions, count)) { 750 dev_err(&idev->dev, "Missing adc-res property in the DT.\n"); 751 ret = -ENODEV; 752 goto ret; 753 } 754 755 if (of_property_read_string(np, "atmel,adc-use-res", (const char **)&res_name)) 756 res_name = "highres"; 757 758 for (i = 0; i < count; i++) { 759 if (of_property_read_string_index(np, "atmel,adc-res-names", i, (const char **)&s)) 760 continue; 761 762 if (strcmp(res_name, s)) 763 continue; 764 765 st->res = resolutions[i]; 766 if (!strcmp(res_name, "lowres")) 767 st->low_res = true; 768 else 769 st->low_res = false; 770 771 dev_info(&idev->dev, "Resolution used: %u bits\n", st->res); 772 goto ret; 773 } 774 775 dev_err(&idev->dev, "There is no resolution for %s\n", res_name); 776 777 ret: 778 kfree(resolutions); 779 return ret; 780 } 781 782 static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz) 783 { 784 /* 785 * Number of ticks needed to cover the startup time of the ADC 786 * as defined in the electrical characteristics of the board, 787 * divided by 8. The formula thus is : 788 * Startup Time = (ticks + 1) * 8 / ADC Clock 789 */ 790 return round_up((startup_time * adc_clk_khz / 1000) - 1, 8) / 8; 791 } 792 793 static u32 calc_startup_ticks_9x5(u8 startup_time, u32 adc_clk_khz) 794 { 795 /* 796 * For sama5d3x and at91sam9x5, the formula changes to: 797 * Startup Time = <lookup_table_value> / ADC Clock 798 */ 799 const int startup_lookup[] = { 800 0 , 8 , 16 , 24 , 801 64 , 80 , 96 , 112, 802 512, 576, 640, 704, 803 768, 832, 896, 960 804 }; 805 int i, size = ARRAY_SIZE(startup_lookup); 806 unsigned int ticks; 807 808 ticks = startup_time * adc_clk_khz / 1000; 809 for (i = 0; i < size; i++) 810 if (ticks < startup_lookup[i]) 811 break; 812 813 ticks = i; 814 if (ticks == size) 815 /* Reach the end of lookup table */ 816 ticks = size - 1; 817 818 return ticks; 819 } 820 821 static const struct of_device_id at91_adc_dt_ids[]; 822 823 static int at91_adc_probe_dt_ts(struct device_node *node, 824 struct at91_adc_state *st, struct device *dev) 825 { 826 int ret; 827 u32 prop; 828 829 ret = of_property_read_u32(node, "atmel,adc-ts-wires", &prop); 830 if (ret) { 831 dev_info(dev, "ADC Touch screen is disabled.\n"); 832 return 0; 833 } 834 835 switch (prop) { 836 case 4: 837 case 5: 838 st->touchscreen_type = prop; 839 break; 840 default: 841 dev_err(dev, "Unsupported number of touchscreen wires (%d). Should be 4 or 5.\n", prop); 842 return -EINVAL; 843 } 844 845 if (!st->caps->has_tsmr) 846 return 0; 847 prop = 0; 848 of_property_read_u32(node, "atmel,adc-ts-pressure-threshold", &prop); 849 st->ts_pressure_threshold = prop; 850 if (st->ts_pressure_threshold) { 851 return 0; 852 } else { 853 dev_err(dev, "Invalid pressure threshold for the touchscreen\n"); 854 return -EINVAL; 855 } 856 } 857 858 static int at91_adc_probe_dt(struct at91_adc_state *st, 859 struct platform_device *pdev) 860 { 861 struct iio_dev *idev = iio_priv_to_dev(st); 862 struct device_node *node = pdev->dev.of_node; 863 struct device_node *trig_node; 864 int i = 0, ret; 865 u32 prop; 866 867 if (!node) 868 return -EINVAL; 869 870 st->caps = (struct at91_adc_caps *) 871 of_match_device(at91_adc_dt_ids, &pdev->dev)->data; 872 873 st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers"); 874 875 if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) { 876 dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n"); 877 ret = -EINVAL; 878 goto error_ret; 879 } 880 st->channels_mask = prop; 881 882 st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode"); 883 884 if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) { 885 dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n"); 886 ret = -EINVAL; 887 goto error_ret; 888 } 889 st->startup_time = prop; 890 891 prop = 0; 892 of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop); 893 st->sample_hold_time = prop; 894 895 if (of_property_read_u32(node, "atmel,adc-vref", &prop)) { 896 dev_err(&idev->dev, "Missing adc-vref property in the DT.\n"); 897 ret = -EINVAL; 898 goto error_ret; 899 } 900 st->vref_mv = prop; 901 902 ret = at91_adc_of_get_resolution(st, pdev); 903 if (ret) 904 goto error_ret; 905 906 st->registers = &st->caps->registers; 907 st->num_channels = st->caps->num_channels; 908 st->trigger_number = of_get_child_count(node); 909 st->trigger_list = devm_kzalloc(&idev->dev, st->trigger_number * 910 sizeof(struct at91_adc_trigger), 911 GFP_KERNEL); 912 if (!st->trigger_list) { 913 dev_err(&idev->dev, "Could not allocate trigger list memory.\n"); 914 ret = -ENOMEM; 915 goto error_ret; 916 } 917 918 for_each_child_of_node(node, trig_node) { 919 struct at91_adc_trigger *trig = st->trigger_list + i; 920 const char *name; 921 922 if (of_property_read_string(trig_node, "trigger-name", &name)) { 923 dev_err(&idev->dev, "Missing trigger-name property in the DT.\n"); 924 ret = -EINVAL; 925 goto error_ret; 926 } 927 trig->name = name; 928 929 if (of_property_read_u32(trig_node, "trigger-value", &prop)) { 930 dev_err(&idev->dev, "Missing trigger-value property in the DT.\n"); 931 ret = -EINVAL; 932 goto error_ret; 933 } 934 trig->value = prop; 935 trig->is_external = of_property_read_bool(trig_node, "trigger-external"); 936 i++; 937 } 938 939 /* Check if touchscreen is supported. */ 940 if (st->caps->has_ts) 941 return at91_adc_probe_dt_ts(node, st, &idev->dev); 942 else 943 dev_info(&idev->dev, "not support touchscreen in the adc compatible string.\n"); 944 945 return 0; 946 947 error_ret: 948 return ret; 949 } 950 951 static int at91_adc_probe_pdata(struct at91_adc_state *st, 952 struct platform_device *pdev) 953 { 954 struct at91_adc_data *pdata = pdev->dev.platform_data; 955 956 if (!pdata) 957 return -EINVAL; 958 959 st->caps = (struct at91_adc_caps *) 960 platform_get_device_id(pdev)->driver_data; 961 962 st->use_external = pdata->use_external_triggers; 963 st->vref_mv = pdata->vref; 964 st->channels_mask = pdata->channels_used; 965 st->num_channels = st->caps->num_channels; 966 st->startup_time = pdata->startup_time; 967 st->trigger_number = pdata->trigger_number; 968 st->trigger_list = pdata->trigger_list; 969 st->registers = &st->caps->registers; 970 st->touchscreen_type = pdata->touchscreen_type; 971 972 return 0; 973 } 974 975 static const struct iio_info at91_adc_info = { 976 .driver_module = THIS_MODULE, 977 .read_raw = &at91_adc_read_raw, 978 }; 979 980 /* Touchscreen related functions */ 981 static int atmel_ts_open(struct input_dev *dev) 982 { 983 struct at91_adc_state *st = input_get_drvdata(dev); 984 985 if (st->caps->has_tsmr) 986 at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN); 987 else 988 at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN); 989 return 0; 990 } 991 992 static void atmel_ts_close(struct input_dev *dev) 993 { 994 struct at91_adc_state *st = input_get_drvdata(dev); 995 996 if (st->caps->has_tsmr) 997 at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN); 998 else 999 at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN); 1000 } 1001 1002 static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz) 1003 { 1004 u32 reg = 0; 1005 int i = 0; 1006 1007 /* a Pen Detect Debounce Time is necessary for the ADC Touch to avoid 1008 * pen detect noise. 1009 * The formula is : Pen Detect Debounce Time = (2 ^ pendbc) / ADCClock 1010 */ 1011 st->ts_pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / 1012 1000, 1); 1013 1014 while (st->ts_pendbc >> ++i) 1015 ; /* Empty! Find the shift offset */ 1016 if (abs(st->ts_pendbc - (1 << i)) < abs(st->ts_pendbc - (1 << (i - 1)))) 1017 st->ts_pendbc = i; 1018 else 1019 st->ts_pendbc = i - 1; 1020 1021 if (!st->caps->has_tsmr) { 1022 reg = at91_adc_readl(st, AT91_ADC_MR); 1023 reg |= AT91_ADC_TSAMOD_TS_ONLY_MODE | AT91_ADC_PENDET; 1024 1025 reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC; 1026 at91_adc_writel(st, AT91_ADC_MR, reg); 1027 1028 reg = AT91_ADC_TSR_SHTIM_(TOUCH_SHTIM) & AT91_ADC_TSR_SHTIM; 1029 at91_adc_writel(st, AT91_ADC_TSR, reg); 1030 1031 st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US_RL * 1032 adc_clk_khz / 1000) - 1, 1); 1033 1034 return 0; 1035 } 1036 1037 if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE) 1038 reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS; 1039 else 1040 reg = AT91_ADC_TSMR_TSMODE_5WIRE; 1041 1042 reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average) 1043 & AT91_ADC_TSMR_TSAV; 1044 reg |= AT91_ADC_TSMR_PENDBC_(st->ts_pendbc) & AT91_ADC_TSMR_PENDBC; 1045 reg |= AT91_ADC_TSMR_NOTSDMA; 1046 reg |= AT91_ADC_TSMR_PENDET_ENA; 1047 reg |= 0x03 << 8; /* TSFREQ, needs to be bigger than TSAV */ 1048 1049 at91_adc_writel(st, AT91_ADC_TSMR, reg); 1050 1051 /* Change adc internal resistor value for better pen detection, 1052 * default value is 100 kOhm. 1053 * 0 = 200 kOhm, 1 = 150 kOhm, 2 = 100 kOhm, 3 = 50 kOhm 1054 * option only available on ES2 and higher 1055 */ 1056 at91_adc_writel(st, AT91_ADC_ACR, st->caps->ts_pen_detect_sensitivity 1057 & AT91_ADC_ACR_PENDETSENS); 1058 1059 /* Sample Period Time = (TRGPER + 1) / ADCClock */ 1060 st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US * 1061 adc_clk_khz / 1000) - 1, 1); 1062 1063 return 0; 1064 } 1065 1066 static int at91_ts_register(struct at91_adc_state *st, 1067 struct platform_device *pdev) 1068 { 1069 struct input_dev *input; 1070 struct iio_dev *idev = iio_priv_to_dev(st); 1071 int ret; 1072 1073 input = input_allocate_device(); 1074 if (!input) { 1075 dev_err(&idev->dev, "Failed to allocate TS device!\n"); 1076 return -ENOMEM; 1077 } 1078 1079 input->name = DRIVER_NAME; 1080 input->id.bustype = BUS_HOST; 1081 input->dev.parent = &pdev->dev; 1082 input->open = atmel_ts_open; 1083 input->close = atmel_ts_close; 1084 1085 __set_bit(EV_ABS, input->evbit); 1086 __set_bit(EV_KEY, input->evbit); 1087 __set_bit(BTN_TOUCH, input->keybit); 1088 if (st->caps->has_tsmr) { 1089 input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, 1090 0, 0); 1091 input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, 1092 0, 0); 1093 input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0); 1094 } else { 1095 if (st->touchscreen_type != ATMEL_ADC_TOUCHSCREEN_4WIRE) { 1096 dev_err(&pdev->dev, 1097 "This touchscreen controller only support 4 wires\n"); 1098 ret = -EINVAL; 1099 goto err; 1100 } 1101 1102 input_set_abs_params(input, ABS_X, 0, (1 << MAX_RLPOS_BITS) - 1, 1103 0, 0); 1104 input_set_abs_params(input, ABS_Y, 0, (1 << MAX_RLPOS_BITS) - 1, 1105 0, 0); 1106 } 1107 1108 st->ts_input = input; 1109 input_set_drvdata(input, st); 1110 1111 ret = input_register_device(input); 1112 if (ret) 1113 goto err; 1114 1115 return ret; 1116 1117 err: 1118 input_free_device(st->ts_input); 1119 return ret; 1120 } 1121 1122 static void at91_ts_unregister(struct at91_adc_state *st) 1123 { 1124 input_unregister_device(st->ts_input); 1125 } 1126 1127 static int at91_adc_probe(struct platform_device *pdev) 1128 { 1129 unsigned int prsc, mstrclk, ticks, adc_clk, adc_clk_khz, shtim; 1130 int ret; 1131 struct iio_dev *idev; 1132 struct at91_adc_state *st; 1133 struct resource *res; 1134 u32 reg; 1135 1136 idev = devm_iio_device_alloc(&pdev->dev, sizeof(struct at91_adc_state)); 1137 if (!idev) 1138 return -ENOMEM; 1139 1140 st = iio_priv(idev); 1141 1142 if (pdev->dev.of_node) 1143 ret = at91_adc_probe_dt(st, pdev); 1144 else 1145 ret = at91_adc_probe_pdata(st, pdev); 1146 1147 if (ret) { 1148 dev_err(&pdev->dev, "No platform data available.\n"); 1149 return -EINVAL; 1150 } 1151 1152 platform_set_drvdata(pdev, idev); 1153 1154 idev->dev.parent = &pdev->dev; 1155 idev->name = dev_name(&pdev->dev); 1156 idev->modes = INDIO_DIRECT_MODE; 1157 idev->info = &at91_adc_info; 1158 1159 st->irq = platform_get_irq(pdev, 0); 1160 if (st->irq < 0) { 1161 dev_err(&pdev->dev, "No IRQ ID is designated\n"); 1162 return -ENODEV; 1163 } 1164 1165 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1166 1167 st->reg_base = devm_ioremap_resource(&pdev->dev, res); 1168 if (IS_ERR(st->reg_base)) { 1169 return PTR_ERR(st->reg_base); 1170 } 1171 1172 /* 1173 * Disable all IRQs before setting up the handler 1174 */ 1175 at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST); 1176 at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF); 1177 1178 if (st->caps->has_tsmr) 1179 ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0, 1180 pdev->dev.driver->name, idev); 1181 else 1182 ret = request_irq(st->irq, at91_adc_rl_interrupt, 0, 1183 pdev->dev.driver->name, idev); 1184 if (ret) { 1185 dev_err(&pdev->dev, "Failed to allocate IRQ.\n"); 1186 return ret; 1187 } 1188 1189 st->clk = devm_clk_get(&pdev->dev, "adc_clk"); 1190 if (IS_ERR(st->clk)) { 1191 dev_err(&pdev->dev, "Failed to get the clock.\n"); 1192 ret = PTR_ERR(st->clk); 1193 goto error_free_irq; 1194 } 1195 1196 ret = clk_prepare_enable(st->clk); 1197 if (ret) { 1198 dev_err(&pdev->dev, 1199 "Could not prepare or enable the clock.\n"); 1200 goto error_free_irq; 1201 } 1202 1203 st->adc_clk = devm_clk_get(&pdev->dev, "adc_op_clk"); 1204 if (IS_ERR(st->adc_clk)) { 1205 dev_err(&pdev->dev, "Failed to get the ADC clock.\n"); 1206 ret = PTR_ERR(st->adc_clk); 1207 goto error_disable_clk; 1208 } 1209 1210 ret = clk_prepare_enable(st->adc_clk); 1211 if (ret) { 1212 dev_err(&pdev->dev, 1213 "Could not prepare or enable the ADC clock.\n"); 1214 goto error_disable_clk; 1215 } 1216 1217 /* 1218 * Prescaler rate computation using the formula from the Atmel's 1219 * datasheet : ADC Clock = MCK / ((Prescaler + 1) * 2), ADC Clock being 1220 * specified by the electrical characteristics of the board. 1221 */ 1222 mstrclk = clk_get_rate(st->clk); 1223 adc_clk = clk_get_rate(st->adc_clk); 1224 adc_clk_khz = adc_clk / 1000; 1225 1226 dev_dbg(&pdev->dev, "Master clock is set as: %d Hz, adc_clk should set as: %d Hz\n", 1227 mstrclk, adc_clk); 1228 1229 prsc = (mstrclk / (2 * adc_clk)) - 1; 1230 1231 if (!st->startup_time) { 1232 dev_err(&pdev->dev, "No startup time available.\n"); 1233 ret = -EINVAL; 1234 goto error_disable_adc_clk; 1235 } 1236 ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz); 1237 1238 /* 1239 * a minimal Sample and Hold Time is necessary for the ADC to guarantee 1240 * the best converted final value between two channels selection 1241 * The formula thus is : Sample and Hold Time = (shtim + 1) / ADCClock 1242 */ 1243 if (st->sample_hold_time > 0) 1244 shtim = round_up((st->sample_hold_time * adc_clk_khz / 1000) 1245 - 1, 1); 1246 else 1247 shtim = 0; 1248 1249 reg = AT91_ADC_PRESCAL_(prsc) & st->registers->mr_prescal_mask; 1250 reg |= AT91_ADC_STARTUP_(ticks) & st->registers->mr_startup_mask; 1251 if (st->low_res) 1252 reg |= AT91_ADC_LOWRES; 1253 if (st->sleep_mode) 1254 reg |= AT91_ADC_SLEEP; 1255 reg |= AT91_ADC_SHTIM_(shtim) & AT91_ADC_SHTIM; 1256 at91_adc_writel(st, AT91_ADC_MR, reg); 1257 1258 /* Setup the ADC channels available on the board */ 1259 ret = at91_adc_channel_init(idev); 1260 if (ret < 0) { 1261 dev_err(&pdev->dev, "Couldn't initialize the channels.\n"); 1262 goto error_disable_adc_clk; 1263 } 1264 1265 init_waitqueue_head(&st->wq_data_avail); 1266 mutex_init(&st->lock); 1267 1268 /* 1269 * Since touch screen will set trigger register as period trigger. So 1270 * when touch screen is enabled, then we have to disable hardware 1271 * trigger for classic adc. 1272 */ 1273 if (!st->touchscreen_type) { 1274 ret = at91_adc_buffer_init(idev); 1275 if (ret < 0) { 1276 dev_err(&pdev->dev, "Couldn't initialize the buffer.\n"); 1277 goto error_disable_adc_clk; 1278 } 1279 1280 ret = at91_adc_trigger_init(idev); 1281 if (ret < 0) { 1282 dev_err(&pdev->dev, "Couldn't setup the triggers.\n"); 1283 at91_adc_buffer_remove(idev); 1284 goto error_disable_adc_clk; 1285 } 1286 } else { 1287 ret = at91_ts_register(st, pdev); 1288 if (ret) 1289 goto error_disable_adc_clk; 1290 1291 at91_ts_hw_init(st, adc_clk_khz); 1292 } 1293 1294 ret = iio_device_register(idev); 1295 if (ret < 0) { 1296 dev_err(&pdev->dev, "Couldn't register the device.\n"); 1297 goto error_iio_device_register; 1298 } 1299 1300 return 0; 1301 1302 error_iio_device_register: 1303 if (!st->touchscreen_type) { 1304 at91_adc_trigger_remove(idev); 1305 at91_adc_buffer_remove(idev); 1306 } else { 1307 at91_ts_unregister(st); 1308 } 1309 error_disable_adc_clk: 1310 clk_disable_unprepare(st->adc_clk); 1311 error_disable_clk: 1312 clk_disable_unprepare(st->clk); 1313 error_free_irq: 1314 free_irq(st->irq, idev); 1315 return ret; 1316 } 1317 1318 static int at91_adc_remove(struct platform_device *pdev) 1319 { 1320 struct iio_dev *idev = platform_get_drvdata(pdev); 1321 struct at91_adc_state *st = iio_priv(idev); 1322 1323 iio_device_unregister(idev); 1324 if (!st->touchscreen_type) { 1325 at91_adc_trigger_remove(idev); 1326 at91_adc_buffer_remove(idev); 1327 } else { 1328 at91_ts_unregister(st); 1329 } 1330 clk_disable_unprepare(st->adc_clk); 1331 clk_disable_unprepare(st->clk); 1332 free_irq(st->irq, idev); 1333 1334 return 0; 1335 } 1336 1337 static struct at91_adc_caps at91sam9260_caps = { 1338 .calc_startup_ticks = calc_startup_ticks_9260, 1339 .num_channels = 4, 1340 .registers = { 1341 .channel_base = AT91_ADC_CHR(0), 1342 .drdy_mask = AT91_ADC_DRDY, 1343 .status_register = AT91_ADC_SR, 1344 .trigger_register = AT91_ADC_TRGR_9260, 1345 .mr_prescal_mask = AT91_ADC_PRESCAL_9260, 1346 .mr_startup_mask = AT91_ADC_STARTUP_9260, 1347 }, 1348 }; 1349 1350 static struct at91_adc_caps at91sam9rl_caps = { 1351 .has_ts = true, 1352 .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */ 1353 .num_channels = 6, 1354 .registers = { 1355 .channel_base = AT91_ADC_CHR(0), 1356 .drdy_mask = AT91_ADC_DRDY, 1357 .status_register = AT91_ADC_SR, 1358 .trigger_register = AT91_ADC_TRGR_9G45, 1359 .mr_prescal_mask = AT91_ADC_PRESCAL_9260, 1360 .mr_startup_mask = AT91_ADC_STARTUP_9G45, 1361 }, 1362 }; 1363 1364 static struct at91_adc_caps at91sam9g45_caps = { 1365 .has_ts = true, 1366 .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */ 1367 .num_channels = 8, 1368 .registers = { 1369 .channel_base = AT91_ADC_CHR(0), 1370 .drdy_mask = AT91_ADC_DRDY, 1371 .status_register = AT91_ADC_SR, 1372 .trigger_register = AT91_ADC_TRGR_9G45, 1373 .mr_prescal_mask = AT91_ADC_PRESCAL_9G45, 1374 .mr_startup_mask = AT91_ADC_STARTUP_9G45, 1375 }, 1376 }; 1377 1378 static struct at91_adc_caps at91sam9x5_caps = { 1379 .has_ts = true, 1380 .has_tsmr = true, 1381 .ts_filter_average = 3, 1382 .ts_pen_detect_sensitivity = 2, 1383 .calc_startup_ticks = calc_startup_ticks_9x5, 1384 .num_channels = 12, 1385 .registers = { 1386 .channel_base = AT91_ADC_CDR0_9X5, 1387 .drdy_mask = AT91_ADC_SR_DRDY_9X5, 1388 .status_register = AT91_ADC_SR_9X5, 1389 .trigger_register = AT91_ADC_TRGR_9X5, 1390 /* prescal mask is same as 9G45 */ 1391 .mr_prescal_mask = AT91_ADC_PRESCAL_9G45, 1392 .mr_startup_mask = AT91_ADC_STARTUP_9X5, 1393 }, 1394 }; 1395 1396 static const struct of_device_id at91_adc_dt_ids[] = { 1397 { .compatible = "atmel,at91sam9260-adc", .data = &at91sam9260_caps }, 1398 { .compatible = "atmel,at91sam9rl-adc", .data = &at91sam9rl_caps }, 1399 { .compatible = "atmel,at91sam9g45-adc", .data = &at91sam9g45_caps }, 1400 { .compatible = "atmel,at91sam9x5-adc", .data = &at91sam9x5_caps }, 1401 {}, 1402 }; 1403 MODULE_DEVICE_TABLE(of, at91_adc_dt_ids); 1404 1405 static const struct platform_device_id at91_adc_ids[] = { 1406 { 1407 .name = "at91sam9260-adc", 1408 .driver_data = (unsigned long)&at91sam9260_caps, 1409 }, { 1410 .name = "at91sam9rl-adc", 1411 .driver_data = (unsigned long)&at91sam9rl_caps, 1412 }, { 1413 .name = "at91sam9g45-adc", 1414 .driver_data = (unsigned long)&at91sam9g45_caps, 1415 }, { 1416 .name = "at91sam9x5-adc", 1417 .driver_data = (unsigned long)&at91sam9x5_caps, 1418 }, { 1419 /* terminator */ 1420 } 1421 }; 1422 MODULE_DEVICE_TABLE(platform, at91_adc_ids); 1423 1424 static struct platform_driver at91_adc_driver = { 1425 .probe = at91_adc_probe, 1426 .remove = at91_adc_remove, 1427 .id_table = at91_adc_ids, 1428 .driver = { 1429 .name = DRIVER_NAME, 1430 .of_match_table = of_match_ptr(at91_adc_dt_ids), 1431 }, 1432 }; 1433 1434 module_platform_driver(at91_adc_driver); 1435 1436 MODULE_LICENSE("GPL"); 1437 MODULE_DESCRIPTION("Atmel AT91 ADC Driver"); 1438 MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); 1439