1# 2# Accelerometer drivers 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Accelerometers" 7 8config BMA180 9 tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" 10 depends on I2C 11 select IIO_BUFFER 12 select IIO_TRIGGERED_BUFFER 13 help 14 Say Y here if you want to build a driver for the Bosch BMA180 or 15 BMA250 triaxial acceleration sensor. 16 17 To compile this driver as a module, choose M here: the 18 module will be called bma180. 19 20config BMA220 21 tristate "Bosch BMA220 3-Axis Accelerometer Driver" 22 depends on SPI 23 select IIO_BUFFER 24 select IIO_TRIGGERED_BUFFER 25 help 26 Say yes here to add support for the Bosch BMA220 triaxial 27 acceleration sensor. 28 29 To compile this driver as a module, choose M here: the 30 module will be called bma220_spi. 31 32config BMC150_ACCEL 33 tristate "Bosch BMC150 Accelerometer Driver" 34 select IIO_BUFFER 35 select IIO_TRIGGERED_BUFFER 36 select REGMAP 37 select BMC150_ACCEL_I2C if I2C 38 select BMC150_ACCEL_SPI if SPI 39 help 40 Say yes here to build support for the following Bosch accelerometers: 41 BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. 42 43 This is a combo module with both accelerometer and magnetometer. 44 This driver is only implementing accelerometer part, which has 45 its own address and register map. 46 47config BMC150_ACCEL_I2C 48 tristate 49 select REGMAP_I2C 50 51config BMC150_ACCEL_SPI 52 tristate 53 select REGMAP_SPI 54 55config DMARD06 56 tristate "Domintech DMARD06 Digital Accelerometer Driver" 57 depends on OF || COMPILE_TEST 58 depends on I2C 59 help 60 Say yes here to build support for the Domintech low-g tri-axial 61 digital accelerometers: DMARD05, DMARD06, DMARD07. 62 63 To compile this driver as a module, choose M here: the 64 module will be called dmard06. 65 66config DMARD09 67 tristate "Domintech DMARD09 3-axis Accelerometer Driver" 68 depends on I2C 69 help 70 Say yes here to get support for the Domintech DMARD09 3-axis 71 accelerometer. 72 73 Choosing M will build the driver as a module. If so, the module 74 will be called dmard09. 75 76config HID_SENSOR_ACCEL_3D 77 depends on HID_SENSOR_HUB 78 select IIO_BUFFER 79 select IIO_TRIGGERED_BUFFER 80 select HID_SENSOR_IIO_COMMON 81 select HID_SENSOR_IIO_TRIGGER 82 tristate "HID Accelerometers 3D" 83 help 84 Say yes here to build support for the HID SENSOR 85 accelerometers 3D. 86 87 To compile this driver as a module, choose M here: the 88 module will be called hid-sensor-accel-3d. 89 90config IIO_ST_ACCEL_3AXIS 91 tristate "STMicroelectronics accelerometers 3-Axis Driver" 92 depends on (I2C || SPI_MASTER) && SYSFS 93 select IIO_ST_SENSORS_CORE 94 select IIO_ST_ACCEL_I2C_3AXIS if (I2C) 95 select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER) 96 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 97 help 98 Say yes here to build support for STMicroelectronics accelerometers: 99 LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, 100 LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL. 101 102 This driver can also be built as a module. If so, these modules 103 will be created: 104 - st_accel (core functions for the driver [it is mandatory]); 105 - st_accel_i2c (necessary for the I2C devices [optional*]); 106 - st_accel_spi (necessary for the SPI devices [optional*]); 107 108 (*) one of these is necessary to do something. 109 110config IIO_ST_ACCEL_I2C_3AXIS 111 tristate 112 depends on IIO_ST_ACCEL_3AXIS 113 depends on IIO_ST_SENSORS_I2C 114 115config IIO_ST_ACCEL_SPI_3AXIS 116 tristate 117 depends on IIO_ST_ACCEL_3AXIS 118 depends on IIO_ST_SENSORS_SPI 119 120config KXSD9 121 tristate "Kionix KXSD9 Accelerometer Driver" 122 help 123 Say yes here to build support for the Kionix KXSD9 accelerometer. 124 It can be accessed using an (optional) SPI or I2C interface. 125 126 To compile this driver as a module, choose M here: the module 127 will be called kxsd9. 128 129config KXSD9_SPI 130 tristate "Kionix KXSD9 SPI transport" 131 depends on KXSD9 132 depends on SPI 133 default KXSD9 134 select REGMAP_SPI 135 help 136 Say yes here to enable the Kionix KXSD9 accelerometer 137 SPI transport channel. 138 139config KXSD9_I2C 140 tristate "Kionix KXSD9 I2C transport" 141 depends on KXSD9 142 depends on I2C 143 default KXSD9 144 select REGMAP_I2C 145 help 146 Say yes here to enable the Kionix KXSD9 accelerometer 147 I2C transport channel. 148 149config KXCJK1013 150 tristate "Kionix 3-Axis Accelerometer Driver" 151 depends on I2C 152 select IIO_BUFFER 153 select IIO_TRIGGERED_BUFFER 154 help 155 Say Y here if you want to build a driver for the Kionix KXCJK-1013 156 triaxial acceleration sensor. This driver also supports KXCJ9-1008 157 and KXTJ2-1009. 158 159 To compile this driver as a module, choose M here: the module will 160 be called kxcjk-1013. 161 162config MMA7455 163 tristate 164 select IIO_BUFFER 165 select IIO_TRIGGERED_BUFFER 166 167config MMA7455_I2C 168 tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver" 169 depends on I2C 170 select MMA7455 171 select REGMAP_I2C 172 help 173 Say yes here to build support for the Freescale MMA7455L and 174 MMA7456L 3-axis accelerometer. 175 176 To compile this driver as a module, choose M here: the module 177 will be called mma7455_i2c. 178 179config MMA7455_SPI 180 tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver" 181 depends on SPI_MASTER 182 select MMA7455 183 select REGMAP_SPI 184 help 185 Say yes here to build support for the Freescale MMA7455L and 186 MMA7456L 3-axis accelerometer. 187 188 To compile this driver as a module, choose M here: the module 189 will be called mma7455_spi. 190 191config MMA7660 192 tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver" 193 depends on I2C 194 help 195 Say yes here to get support for the Freescale MMA7660FC 3-Axis 196 accelerometer. 197 198 Choosing M will build the driver as a module. If so, the module 199 will be called mma7660. 200 201config MMA8452 202 tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver" 203 depends on I2C 204 select IIO_BUFFER 205 select IIO_TRIGGERED_BUFFER 206 help 207 Say yes here to build support for the following Freescale / NXP 3-axis 208 accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC, 209 FXLS8471Q. 210 211 To compile this driver as a module, choose M here: the module 212 will be called mma8452. 213 214config MMA9551_CORE 215 tristate 216 217config MMA9551 218 tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" 219 depends on I2C 220 select MMA9551_CORE 221 222 help 223 Say yes here to build support for the Freescale MMA9551L 224 Intelligent Motion-Sensing Platform Driver. 225 226 To compile this driver as a module, choose M here: the module 227 will be called mma9551. 228 229config MMA9553 230 tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" 231 depends on I2C 232 select MMA9551_CORE 233 help 234 Say yes here to build support for the Freescale MMA9553L 235 Intelligent Pedometer Platform Driver. 236 237 To compile this driver as a module, choose M here: the module 238 will be called mma9553. 239 240config MXC4005 241 tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" 242 depends on I2C 243 select IIO_BUFFER 244 select IIO_TRIGGERED_BUFFER 245 select REGMAP_I2C 246 help 247 Say yes here to build support for the Memsic MXC4005XC 3-axis 248 accelerometer. 249 250 To compile this driver as a module, choose M. The module will be 251 called mxc4005. 252 253config MXC6255 254 tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver" 255 depends on I2C 256 select REGMAP_I2C 257 help 258 Say yes here to build support for the Memsic MXC6255 Orientation 259 Sensing Accelerometer Driver. 260 261 To compile this driver as a module, choose M here: the module will be 262 called mxc6255. 263 264config STK8312 265 tristate "Sensortek STK8312 3-Axis Accelerometer Driver" 266 depends on I2C 267 select IIO_BUFFER 268 select IIO_TRIGGERED_BUFFER 269 help 270 Say yes here to get support for the Sensortek STK8312 3-axis 271 accelerometer. 272 273 Choosing M will build the driver as a module. If so, the module 274 will be called stk8312. 275 276config STK8BA50 277 tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" 278 depends on I2C 279 select IIO_BUFFER 280 select IIO_TRIGGERED_BUFFER 281 help 282 Say yes here to get support for the Sensortek STK8BA50 3-axis 283 accelerometer. 284 285 Choosing M will build the driver as a module. If so, the module 286 will be called stk8ba50. 287 288endmenu 289