1# 2# Accelerometer drivers 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Accelerometers" 7 8config BMA180 9 tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" 10 depends on I2C 11 select IIO_BUFFER 12 select IIO_TRIGGERED_BUFFER 13 help 14 Say Y here if you want to build a driver for the Bosch BMA180 or 15 BMA250 triaxial acceleration sensor. 16 17 To compile this driver as a module, choose M here: the 18 module will be called bma180. 19 20config BMC150_ACCEL 21 tristate "Bosch BMC150 Accelerometer Driver" 22 select IIO_BUFFER 23 select IIO_TRIGGERED_BUFFER 24 select REGMAP 25 select BMC150_ACCEL_I2C if I2C 26 select BMC150_ACCEL_SPI if SPI 27 help 28 Say yes here to build support for the following Bosch accelerometers: 29 BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. 30 31 This is a combo module with both accelerometer and magnetometer. 32 This driver is only implementing accelerometer part, which has 33 its own address and register map. 34 35config BMC150_ACCEL_I2C 36 tristate 37 select REGMAP_I2C 38 39config BMC150_ACCEL_SPI 40 tristate 41 select REGMAP_SPI 42 43config HID_SENSOR_ACCEL_3D 44 depends on HID_SENSOR_HUB 45 select IIO_BUFFER 46 select IIO_TRIGGERED_BUFFER 47 select HID_SENSOR_IIO_COMMON 48 select HID_SENSOR_IIO_TRIGGER 49 tristate "HID Accelerometers 3D" 50 help 51 Say yes here to build support for the HID SENSOR 52 accelerometers 3D. 53 54 To compile this driver as a module, choose M here: the 55 module will be called hid-sensor-accel-3d. 56 57config IIO_ST_ACCEL_3AXIS 58 tristate "STMicroelectronics accelerometers 3-Axis Driver" 59 depends on (I2C || SPI_MASTER) && SYSFS 60 select IIO_ST_SENSORS_CORE 61 select IIO_ST_ACCEL_I2C_3AXIS if (I2C) 62 select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER) 63 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 64 help 65 Say yes here to build support for STMicroelectronics accelerometers: 66 LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, 67 LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12. 68 69 This driver can also be built as a module. If so, these modules 70 will be created: 71 - st_accel (core functions for the driver [it is mandatory]); 72 - st_accel_i2c (necessary for the I2C devices [optional*]); 73 - st_accel_spi (necessary for the SPI devices [optional*]); 74 75 (*) one of these is necessary to do something. 76 77config IIO_ST_ACCEL_I2C_3AXIS 78 tristate 79 depends on IIO_ST_ACCEL_3AXIS 80 depends on IIO_ST_SENSORS_I2C 81 82config IIO_ST_ACCEL_SPI_3AXIS 83 tristate 84 depends on IIO_ST_ACCEL_3AXIS 85 depends on IIO_ST_SENSORS_SPI 86 87config KXSD9 88 tristate "Kionix KXSD9 Accelerometer Driver" 89 depends on SPI 90 help 91 Say yes here to build support for the Kionix KXSD9 accelerometer. 92 Currently this only supports the device via an SPI interface. 93 94 To compile this driver as a module, choose M here: the module 95 will be called kxsd9. 96 97config KXCJK1013 98 tristate "Kionix 3-Axis Accelerometer Driver" 99 depends on I2C 100 select IIO_BUFFER 101 select IIO_TRIGGERED_BUFFER 102 help 103 Say Y here if you want to build a driver for the Kionix KXCJK-1013 104 triaxial acceleration sensor. This driver also supports KXCJ9-1008 105 and KXTJ2-1009. 106 107 To compile this driver as a module, choose M here: the module will 108 be called kxcjk-1013. 109 110config MMA7455 111 tristate 112 select IIO_BUFFER 113 select IIO_TRIGGERED_BUFFER 114 115config MMA7455_I2C 116 tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver" 117 depends on I2C 118 select MMA7455 119 select REGMAP_I2C 120 help 121 Say yes here to build support for the Freescale MMA7455L and 122 MMA7456L 3-axis accelerometer. 123 124 To compile this driver as a module, choose M here: the module 125 will be called mma7455_i2c. 126 127config MMA7455_SPI 128 tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver" 129 depends on SPI_MASTER 130 select MMA7455 131 select REGMAP_SPI 132 help 133 Say yes here to build support for the Freescale MMA7455L and 134 MMA7456L 3-axis accelerometer. 135 136 To compile this driver as a module, choose M here: the module 137 will be called mma7455_spi. 138 139config MMA8452 140 tristate "Freescale MMA8452Q and similar Accelerometers Driver" 141 depends on I2C 142 select IIO_BUFFER 143 select IIO_TRIGGERED_BUFFER 144 help 145 Say yes here to build support for the following Freescale 3-axis 146 accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. 147 148 To compile this driver as a module, choose M here: the module 149 will be called mma8452. 150 151config MMA9551_CORE 152 tristate 153 154config MMA9551 155 tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" 156 depends on I2C 157 select MMA9551_CORE 158 159 help 160 Say yes here to build support for the Freescale MMA9551L 161 Intelligent Motion-Sensing Platform Driver. 162 163 To compile this driver as a module, choose M here: the module 164 will be called mma9551. 165 166config MMA9553 167 tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" 168 depends on I2C 169 select MMA9551_CORE 170 help 171 Say yes here to build support for the Freescale MMA9553L 172 Intelligent Pedometer Platform Driver. 173 174 To compile this driver as a module, choose M here: the module 175 will be called mma9553. 176 177config MXC4005 178 tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" 179 depends on I2C 180 select IIO_BUFFER 181 select IIO_TRIGGERED_BUFFER 182 select REGMAP_I2C 183 help 184 Say yes here to build support for the Memsic MXC4005XC 3-axis 185 accelerometer. 186 187 To compile this driver as a module, choose M. The module will be 188 called mxc4005. 189 190config MXC6255 191 tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver" 192 depends on I2C 193 select REGMAP_I2C 194 help 195 Say yes here to build support for the Memsic MXC6255 Orientation 196 Sensing Accelerometer Driver. 197 198 To compile this driver as a module, choose M here: the module will be 199 called mxc6255. 200 201config STK8312 202 tristate "Sensortek STK8312 3-Axis Accelerometer Driver" 203 depends on I2C 204 select IIO_BUFFER 205 select IIO_TRIGGERED_BUFFER 206 help 207 Say yes here to get support for the Sensortek STK8312 3-axis 208 accelerometer. 209 210 Choosing M will build the driver as a module. If so, the module 211 will be called stk8312. 212 213config STK8BA50 214 tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" 215 depends on I2C 216 help 217 Say yes here to get support for the Sensortek STK8BA50 3-axis 218 accelerometer. 219 220 Choosing M will build the driver as a module. If so, the module 221 will be called stk8ba50. 222 223endmenu 224