1# 2# Accelerometer drivers 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Accelerometers" 7 8config BMA180 9 tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" 10 depends on I2C 11 select IIO_BUFFER 12 select IIO_TRIGGERED_BUFFER 13 help 14 Say Y here if you want to build a driver for the Bosch BMA180 or 15 BMA250 triaxial acceleration sensor. 16 17 To compile this driver as a module, choose M here: the 18 module will be called bma180. 19 20config BMA220 21 tristate "Bosch BMA220 3-Axis Accelerometer Driver" 22 depends on SPI 23 select IIO_BUFFER 24 select IIO_TRIGGERED_BUFFER 25 help 26 Say yes here to add support for the Bosch BMA220 triaxial 27 acceleration sensor. 28 29 To compile this driver as a module, choose M here: the 30 module will be called bma220_spi. 31 32config BMC150_ACCEL 33 tristate "Bosch BMC150 Accelerometer Driver" 34 select IIO_BUFFER 35 select IIO_TRIGGERED_BUFFER 36 select REGMAP 37 select BMC150_ACCEL_I2C if I2C 38 select BMC150_ACCEL_SPI if SPI 39 help 40 Say yes here to build support for the following Bosch accelerometers: 41 BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. 42 43 This is a combo module with both accelerometer and magnetometer. 44 This driver is only implementing accelerometer part, which has 45 its own address and register map. 46 47config BMC150_ACCEL_I2C 48 tristate 49 select REGMAP_I2C 50 51config BMC150_ACCEL_SPI 52 tristate 53 select REGMAP_SPI 54 55config DMARD06 56 tristate "Domintech DMARD06 Digital Accelerometer Driver" 57 depends on OF || COMPILE_TEST 58 depends on I2C 59 help 60 Say yes here to build support for the Domintech low-g tri-axial 61 digital accelerometers: DMARD05, DMARD06, DMARD07. 62 63 To compile this driver as a module, choose M here: the 64 module will be called dmard06. 65 66config DMARD09 67 tristate "Domintech DMARD09 3-axis Accelerometer Driver" 68 depends on I2C 69 help 70 Say yes here to get support for the Domintech DMARD09 3-axis 71 accelerometer. 72 73 Choosing M will build the driver as a module. If so, the module 74 will be called dmard09. 75 76config HID_SENSOR_ACCEL_3D 77 depends on HID_SENSOR_HUB 78 select IIO_BUFFER 79 select IIO_TRIGGERED_BUFFER 80 select HID_SENSOR_IIO_COMMON 81 select HID_SENSOR_IIO_TRIGGER 82 tristate "HID Accelerometers 3D" 83 help 84 Say yes here to build support for the HID SENSOR 85 accelerometers 3D. 86 87 To compile this driver as a module, choose M here: the 88 module will be called hid-sensor-accel-3d. 89 90config IIO_ST_ACCEL_3AXIS 91 tristate "STMicroelectronics accelerometers 3-Axis Driver" 92 depends on (I2C || SPI_MASTER) && SYSFS 93 select IIO_ST_SENSORS_CORE 94 select IIO_ST_ACCEL_I2C_3AXIS if (I2C) 95 select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER) 96 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 97 help 98 Say yes here to build support for STMicroelectronics accelerometers: 99 LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, 100 LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL. 101 102 This driver can also be built as a module. If so, these modules 103 will be created: 104 - st_accel (core functions for the driver [it is mandatory]); 105 - st_accel_i2c (necessary for the I2C devices [optional*]); 106 - st_accel_spi (necessary for the SPI devices [optional*]); 107 108 (*) one of these is necessary to do something. 109 110config IIO_ST_ACCEL_I2C_3AXIS 111 tristate 112 depends on IIO_ST_ACCEL_3AXIS 113 depends on IIO_ST_SENSORS_I2C 114 115config IIO_ST_ACCEL_SPI_3AXIS 116 tristate 117 depends on IIO_ST_ACCEL_3AXIS 118 depends on IIO_ST_SENSORS_SPI 119 120config KXSD9 121 tristate "Kionix KXSD9 Accelerometer Driver" 122 depends on SPI 123 help 124 Say yes here to build support for the Kionix KXSD9 accelerometer. 125 Currently this only supports the device via an SPI interface. 126 127 To compile this driver as a module, choose M here: the module 128 will be called kxsd9. 129 130config KXCJK1013 131 tristate "Kionix 3-Axis Accelerometer Driver" 132 depends on I2C 133 select IIO_BUFFER 134 select IIO_TRIGGERED_BUFFER 135 help 136 Say Y here if you want to build a driver for the Kionix KXCJK-1013 137 triaxial acceleration sensor. This driver also supports KXCJ9-1008 138 and KXTJ2-1009. 139 140 To compile this driver as a module, choose M here: the module will 141 be called kxcjk-1013. 142 143config MMA7455 144 tristate 145 select IIO_BUFFER 146 select IIO_TRIGGERED_BUFFER 147 148config MMA7455_I2C 149 tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver" 150 depends on I2C 151 select MMA7455 152 select REGMAP_I2C 153 help 154 Say yes here to build support for the Freescale MMA7455L and 155 MMA7456L 3-axis accelerometer. 156 157 To compile this driver as a module, choose M here: the module 158 will be called mma7455_i2c. 159 160config MMA7455_SPI 161 tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver" 162 depends on SPI_MASTER 163 select MMA7455 164 select REGMAP_SPI 165 help 166 Say yes here to build support for the Freescale MMA7455L and 167 MMA7456L 3-axis accelerometer. 168 169 To compile this driver as a module, choose M here: the module 170 will be called mma7455_spi. 171 172config MMA7660 173 tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver" 174 depends on I2C 175 help 176 Say yes here to get support for the Freescale MMA7660FC 3-Axis 177 accelerometer. 178 179 Choosing M will build the driver as a module. If so, the module 180 will be called mma7660. 181 182config MMA8452 183 tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver" 184 depends on I2C 185 select IIO_BUFFER 186 select IIO_TRIGGERED_BUFFER 187 help 188 Say yes here to build support for the following Freescale / NXP 3-axis 189 accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC, 190 FXLS8471Q. 191 192 To compile this driver as a module, choose M here: the module 193 will be called mma8452. 194 195config MMA9551_CORE 196 tristate 197 198config MMA9551 199 tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" 200 depends on I2C 201 select MMA9551_CORE 202 203 help 204 Say yes here to build support for the Freescale MMA9551L 205 Intelligent Motion-Sensing Platform Driver. 206 207 To compile this driver as a module, choose M here: the module 208 will be called mma9551. 209 210config MMA9553 211 tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" 212 depends on I2C 213 select MMA9551_CORE 214 help 215 Say yes here to build support for the Freescale MMA9553L 216 Intelligent Pedometer Platform Driver. 217 218 To compile this driver as a module, choose M here: the module 219 will be called mma9553. 220 221config MXC4005 222 tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" 223 depends on I2C 224 select IIO_BUFFER 225 select IIO_TRIGGERED_BUFFER 226 select REGMAP_I2C 227 help 228 Say yes here to build support for the Memsic MXC4005XC 3-axis 229 accelerometer. 230 231 To compile this driver as a module, choose M. The module will be 232 called mxc4005. 233 234config MXC6255 235 tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver" 236 depends on I2C 237 select REGMAP_I2C 238 help 239 Say yes here to build support for the Memsic MXC6255 Orientation 240 Sensing Accelerometer Driver. 241 242 To compile this driver as a module, choose M here: the module will be 243 called mxc6255. 244 245config STK8312 246 tristate "Sensortek STK8312 3-Axis Accelerometer Driver" 247 depends on I2C 248 select IIO_BUFFER 249 select IIO_TRIGGERED_BUFFER 250 help 251 Say yes here to get support for the Sensortek STK8312 3-axis 252 accelerometer. 253 254 Choosing M will build the driver as a module. If so, the module 255 will be called stk8312. 256 257config STK8BA50 258 tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" 259 depends on I2C 260 select IIO_BUFFER 261 select IIO_TRIGGERED_BUFFER 262 help 263 Say yes here to get support for the Sensortek STK8BA50 3-axis 264 accelerometer. 265 266 Choosing M will build the driver as a module. If so, the module 267 will be called stk8ba50. 268 269endmenu 270