1# 2# Accelerometer drivers 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Accelerometers" 7 8config BMA180 9 tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" 10 depends on I2C 11 select IIO_BUFFER 12 select IIO_TRIGGERED_BUFFER 13 help 14 Say Y here if you want to build a driver for the Bosch BMA180 or 15 BMA250 triaxial acceleration sensor. 16 17 To compile this driver as a module, choose M here: the 18 module will be called bma180. 19 20config BMA220 21 tristate "Bosch BMA220 3-Axis Accelerometer Driver" 22 depends on SPI 23 select IIO_BUFFER 24 select IIO_TRIGGERED_BUFFER 25 help 26 Say yes here to add support for the Bosch BMA220 triaxial 27 acceleration sensor. 28 29 To compile this driver as a module, choose M here: the 30 module will be called bma220_spi. 31 32config BMC150_ACCEL 33 tristate "Bosch BMC150 Accelerometer Driver" 34 select IIO_BUFFER 35 select IIO_TRIGGERED_BUFFER 36 select REGMAP 37 select BMC150_ACCEL_I2C if I2C 38 select BMC150_ACCEL_SPI if SPI 39 help 40 Say yes here to build support for the following Bosch accelerometers: 41 BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. 42 43 This is a combo module with both accelerometer and magnetometer. 44 This driver is only implementing accelerometer part, which has 45 its own address and register map. 46 47config BMC150_ACCEL_I2C 48 tristate 49 select REGMAP_I2C 50 51config BMC150_ACCEL_SPI 52 tristate 53 select REGMAP_SPI 54 55config DMARD06 56 tristate "Domintech DMARD06 Digital Accelerometer Driver" 57 depends on OF || COMPILE_TEST 58 depends on I2C 59 help 60 Say yes here to build support for the Domintech low-g tri-axial 61 digital accelerometers: DMARD05, DMARD06, DMARD07. 62 63 To compile this driver as a module, choose M here: the 64 module will be called dmard06. 65 66config DMARD09 67 tristate "Domintech DMARD09 3-axis Accelerometer Driver" 68 depends on I2C 69 help 70 Say yes here to get support for the Domintech DMARD09 3-axis 71 accelerometer. 72 73 Choosing M will build the driver as a module. If so, the module 74 will be called dmard09. 75 76config HID_SENSOR_ACCEL_3D 77 depends on HID_SENSOR_HUB 78 select IIO_BUFFER 79 select IIO_TRIGGERED_BUFFER 80 select HID_SENSOR_IIO_COMMON 81 select HID_SENSOR_IIO_TRIGGER 82 tristate "HID Accelerometers 3D" 83 help 84 Say yes here to build support for the HID SENSOR 85 accelerometers 3D. 86 87 To compile this driver as a module, choose M here: the 88 module will be called hid-sensor-accel-3d. 89 90config IIO_ST_ACCEL_3AXIS 91 tristate "STMicroelectronics accelerometers 3-Axis Driver" 92 depends on (I2C || SPI_MASTER) && SYSFS 93 select IIO_ST_SENSORS_CORE 94 select IIO_ST_ACCEL_I2C_3AXIS if (I2C) 95 select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER) 96 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 97 help 98 Say yes here to build support for STMicroelectronics accelerometers: 99 LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, 100 LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL. 101 102 This driver can also be built as a module. If so, these modules 103 will be created: 104 - st_accel (core functions for the driver [it is mandatory]); 105 - st_accel_i2c (necessary for the I2C devices [optional*]); 106 - st_accel_spi (necessary for the SPI devices [optional*]); 107 108 (*) one of these is necessary to do something. 109 110config IIO_ST_ACCEL_I2C_3AXIS 111 tristate 112 depends on IIO_ST_ACCEL_3AXIS 113 depends on IIO_ST_SENSORS_I2C 114 115config IIO_ST_ACCEL_SPI_3AXIS 116 tristate 117 depends on IIO_ST_ACCEL_3AXIS 118 depends on IIO_ST_SENSORS_SPI 119 120config KXSD9 121 tristate "Kionix KXSD9 Accelerometer Driver" 122 select IIO_BUFFER 123 select IIO_TRIGGERED_BUFFER 124 help 125 Say yes here to build support for the Kionix KXSD9 accelerometer. 126 It can be accessed using an (optional) SPI or I2C interface. 127 128 To compile this driver as a module, choose M here: the module 129 will be called kxsd9. 130 131config KXSD9_SPI 132 tristate "Kionix KXSD9 SPI transport" 133 depends on KXSD9 134 depends on SPI 135 default KXSD9 136 select REGMAP_SPI 137 help 138 Say yes here to enable the Kionix KXSD9 accelerometer 139 SPI transport channel. 140 141config KXSD9_I2C 142 tristate "Kionix KXSD9 I2C transport" 143 depends on KXSD9 144 depends on I2C 145 default KXSD9 146 select REGMAP_I2C 147 help 148 Say yes here to enable the Kionix KXSD9 accelerometer 149 I2C transport channel. 150 151config KXCJK1013 152 tristate "Kionix 3-Axis Accelerometer Driver" 153 depends on I2C 154 select IIO_BUFFER 155 select IIO_TRIGGERED_BUFFER 156 help 157 Say Y here if you want to build a driver for the Kionix KXCJK-1013 158 triaxial acceleration sensor. This driver also supports KXCJ9-1008 159 and KXTJ2-1009. 160 161 To compile this driver as a module, choose M here: the module will 162 be called kxcjk-1013. 163 164config MMA7455 165 tristate 166 select IIO_BUFFER 167 select IIO_TRIGGERED_BUFFER 168 169config MMA7455_I2C 170 tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver" 171 depends on I2C 172 select MMA7455 173 select REGMAP_I2C 174 help 175 Say yes here to build support for the Freescale MMA7455L and 176 MMA7456L 3-axis accelerometer. 177 178 To compile this driver as a module, choose M here: the module 179 will be called mma7455_i2c. 180 181config MMA7455_SPI 182 tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver" 183 depends on SPI_MASTER 184 select MMA7455 185 select REGMAP_SPI 186 help 187 Say yes here to build support for the Freescale MMA7455L and 188 MMA7456L 3-axis accelerometer. 189 190 To compile this driver as a module, choose M here: the module 191 will be called mma7455_spi. 192 193config MMA7660 194 tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver" 195 depends on I2C 196 help 197 Say yes here to get support for the Freescale MMA7660FC 3-Axis 198 accelerometer. 199 200 Choosing M will build the driver as a module. If so, the module 201 will be called mma7660. 202 203config MMA8452 204 tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver" 205 depends on I2C 206 select IIO_BUFFER 207 select IIO_TRIGGERED_BUFFER 208 help 209 Say yes here to build support for the following Freescale / NXP 3-axis 210 accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC, 211 FXLS8471Q. 212 213 To compile this driver as a module, choose M here: the module 214 will be called mma8452. 215 216config MMA9551_CORE 217 tristate 218 219config MMA9551 220 tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" 221 depends on I2C 222 select MMA9551_CORE 223 224 help 225 Say yes here to build support for the Freescale MMA9551L 226 Intelligent Motion-Sensing Platform Driver. 227 228 To compile this driver as a module, choose M here: the module 229 will be called mma9551. 230 231config MMA9553 232 tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" 233 depends on I2C 234 select MMA9551_CORE 235 help 236 Say yes here to build support for the Freescale MMA9553L 237 Intelligent Pedometer Platform Driver. 238 239 To compile this driver as a module, choose M here: the module 240 will be called mma9553. 241 242config MXC4005 243 tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" 244 depends on I2C 245 select IIO_BUFFER 246 select IIO_TRIGGERED_BUFFER 247 select REGMAP_I2C 248 help 249 Say yes here to build support for the Memsic MXC4005XC 3-axis 250 accelerometer. 251 252 To compile this driver as a module, choose M. The module will be 253 called mxc4005. 254 255config MXC6255 256 tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver" 257 depends on I2C 258 select REGMAP_I2C 259 help 260 Say yes here to build support for the Memsic MXC6255 Orientation 261 Sensing Accelerometer Driver. 262 263 To compile this driver as a module, choose M here: the module will be 264 called mxc6255. 265 266config STK8312 267 tristate "Sensortek STK8312 3-Axis Accelerometer Driver" 268 depends on I2C 269 select IIO_BUFFER 270 select IIO_TRIGGERED_BUFFER 271 help 272 Say yes here to get support for the Sensortek STK8312 3-axis 273 accelerometer. 274 275 Choosing M will build the driver as a module. If so, the module 276 will be called stk8312. 277 278config STK8BA50 279 tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" 280 depends on I2C 281 select IIO_BUFFER 282 select IIO_TRIGGERED_BUFFER 283 help 284 Say yes here to get support for the Sensortek STK8BA50 3-axis 285 accelerometer. 286 287 Choosing M will build the driver as a module. If so, the module 288 will be called stk8ba50. 289 290endmenu 291