1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * X-Gene SLIMpro I2C Driver 4 * 5 * Copyright (c) 2014, Applied Micro Circuits Corporation 6 * Author: Feng Kan <fkan@apm.com> 7 * Author: Hieu Le <hnle@apm.com> 8 * 9 * This driver provides support for X-Gene SLIMpro I2C device access 10 * using the APM X-Gene SLIMpro mailbox driver. 11 */ 12 #include <acpi/pcc.h> 13 #include <linux/acpi.h> 14 #include <linux/dma-mapping.h> 15 #include <linux/i2c.h> 16 #include <linux/interrupt.h> 17 #include <linux/io.h> 18 #include <linux/mailbox_client.h> 19 #include <linux/module.h> 20 #include <linux/of.h> 21 #include <linux/platform_device.h> 22 23 #define MAILBOX_OP_TIMEOUT 1000 /* Operation time out in ms */ 24 #define MAILBOX_I2C_INDEX 0 25 #define SLIMPRO_IIC_BUS 1 /* Use I2C bus 1 only */ 26 27 #define SMBUS_CMD_LEN 1 28 #define BYTE_DATA 1 29 #define WORD_DATA 2 30 #define BLOCK_DATA 3 31 32 #define SLIMPRO_IIC_I2C_PROTOCOL 0 33 #define SLIMPRO_IIC_SMB_PROTOCOL 1 34 35 #define SLIMPRO_IIC_READ 0 36 #define SLIMPRO_IIC_WRITE 1 37 38 #define IIC_SMB_WITHOUT_DATA_LEN 0 39 #define IIC_SMB_WITH_DATA_LEN 1 40 41 #define SLIMPRO_DEBUG_MSG 0 42 #define SLIMPRO_MSG_TYPE_SHIFT 28 43 #define SLIMPRO_DBG_SUBTYPE_I2C1READ 4 44 #define SLIMPRO_DBGMSG_TYPE_SHIFT 24 45 #define SLIMPRO_DBGMSG_TYPE_MASK 0x0F000000U 46 #define SLIMPRO_IIC_DEV_SHIFT 23 47 #define SLIMPRO_IIC_DEV_MASK 0x00800000U 48 #define SLIMPRO_IIC_DEVID_SHIFT 13 49 #define SLIMPRO_IIC_DEVID_MASK 0x007FE000U 50 #define SLIMPRO_IIC_RW_SHIFT 12 51 #define SLIMPRO_IIC_RW_MASK 0x00001000U 52 #define SLIMPRO_IIC_PROTO_SHIFT 11 53 #define SLIMPRO_IIC_PROTO_MASK 0x00000800U 54 #define SLIMPRO_IIC_ADDRLEN_SHIFT 8 55 #define SLIMPRO_IIC_ADDRLEN_MASK 0x00000700U 56 #define SLIMPRO_IIC_DATALEN_SHIFT 0 57 #define SLIMPRO_IIC_DATALEN_MASK 0x000000FFU 58 59 /* 60 * SLIMpro I2C message encode 61 * 62 * dev - Controller number (0-based) 63 * chip - I2C chip address 64 * op - SLIMPRO_IIC_READ or SLIMPRO_IIC_WRITE 65 * proto - SLIMPRO_IIC_SMB_PROTOCOL or SLIMPRO_IIC_I2C_PROTOCOL 66 * addrlen - Length of the address field 67 * datalen - Length of the data field 68 */ 69 #define SLIMPRO_IIC_ENCODE_MSG(dev, chip, op, proto, addrlen, datalen) \ 70 ((SLIMPRO_DEBUG_MSG << SLIMPRO_MSG_TYPE_SHIFT) | \ 71 ((SLIMPRO_DBG_SUBTYPE_I2C1READ << SLIMPRO_DBGMSG_TYPE_SHIFT) & \ 72 SLIMPRO_DBGMSG_TYPE_MASK) | \ 73 ((dev << SLIMPRO_IIC_DEV_SHIFT) & SLIMPRO_IIC_DEV_MASK) | \ 74 ((chip << SLIMPRO_IIC_DEVID_SHIFT) & SLIMPRO_IIC_DEVID_MASK) | \ 75 ((op << SLIMPRO_IIC_RW_SHIFT) & SLIMPRO_IIC_RW_MASK) | \ 76 ((proto << SLIMPRO_IIC_PROTO_SHIFT) & SLIMPRO_IIC_PROTO_MASK) | \ 77 ((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \ 78 ((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK)) 79 80 #define SLIMPRO_MSG_TYPE(v) (((v) & 0xF0000000) >> 28) 81 82 /* 83 * Encode for upper address for block data 84 */ 85 #define SLIMPRO_IIC_ENCODE_FLAG_BUFADDR 0x80000000 86 #define SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(a) ((u32) (((a) << 30) \ 87 & 0x40000000)) 88 #define SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(a) ((u32) (((a) >> 12) \ 89 & 0x3FF00000)) 90 #define SLIMPRO_IIC_ENCODE_ADDR(a) ((a) & 0x000FFFFF) 91 92 #define SLIMPRO_IIC_MSG_DWORD_COUNT 3 93 94 /* PCC related defines */ 95 #define PCC_SIGNATURE 0x50424300 96 #define PCC_STS_CMD_COMPLETE BIT(0) 97 #define PCC_STS_SCI_DOORBELL BIT(1) 98 #define PCC_STS_ERR BIT(2) 99 #define PCC_STS_PLAT_NOTIFY BIT(3) 100 #define PCC_CMD_GENERATE_DB_INT BIT(15) 101 102 struct slimpro_i2c_dev { 103 struct i2c_adapter adapter; 104 struct device *dev; 105 struct mbox_chan *mbox_chan; 106 struct pcc_mbox_chan *pcc_chan; 107 struct mbox_client mbox_client; 108 int mbox_idx; 109 struct completion rd_complete; 110 u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */ 111 u32 *resp_msg; 112 phys_addr_t comm_base_addr; 113 void *pcc_comm_addr; 114 }; 115 116 #define to_slimpro_i2c_dev(cl) \ 117 container_of(cl, struct slimpro_i2c_dev, mbox_client) 118 119 enum slimpro_i2c_version { 120 XGENE_SLIMPRO_I2C_V1 = 0, 121 XGENE_SLIMPRO_I2C_V2 = 1, 122 }; 123 124 /* 125 * This function tests and clears a bitmask then returns its old value 126 */ 127 static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask) 128 { 129 u16 ret, val; 130 131 val = le16_to_cpu(READ_ONCE(*addr)); 132 ret = val & mask; 133 val &= ~mask; 134 WRITE_ONCE(*addr, cpu_to_le16(val)); 135 136 return ret; 137 } 138 139 static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg) 140 { 141 struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl); 142 143 /* 144 * Response message format: 145 * mssg[0] is the return code of the operation 146 * mssg[1] is the first data word 147 * mssg[2] is NOT used 148 */ 149 if (ctx->resp_msg) 150 *ctx->resp_msg = ((u32 *)mssg)[1]; 151 152 if (ctx->mbox_client.tx_block) 153 complete(&ctx->rd_complete); 154 } 155 156 static void slimpro_i2c_pcc_rx_cb(struct mbox_client *cl, void *msg) 157 { 158 struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl); 159 struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; 160 161 /* Check if platform sends interrupt */ 162 if (!xgene_word_tst_and_clr(&generic_comm_base->status, 163 PCC_STS_SCI_DOORBELL)) 164 return; 165 166 if (xgene_word_tst_and_clr(&generic_comm_base->status, 167 PCC_STS_CMD_COMPLETE)) { 168 msg = generic_comm_base + 1; 169 170 /* Response message msg[1] contains the return value. */ 171 if (ctx->resp_msg) 172 *ctx->resp_msg = ((u32 *)msg)[1]; 173 174 complete(&ctx->rd_complete); 175 } 176 } 177 178 static void slimpro_i2c_pcc_tx_prepare(struct slimpro_i2c_dev *ctx, u32 *msg) 179 { 180 struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; 181 u32 *ptr = (void *)(generic_comm_base + 1); 182 u16 status; 183 int i; 184 185 WRITE_ONCE(generic_comm_base->signature, 186 cpu_to_le32(PCC_SIGNATURE | ctx->mbox_idx)); 187 188 WRITE_ONCE(generic_comm_base->command, 189 cpu_to_le16(SLIMPRO_MSG_TYPE(msg[0]) | PCC_CMD_GENERATE_DB_INT)); 190 191 status = le16_to_cpu(READ_ONCE(generic_comm_base->status)); 192 status &= ~PCC_STS_CMD_COMPLETE; 193 WRITE_ONCE(generic_comm_base->status, cpu_to_le16(status)); 194 195 /* Copy the message to the PCC comm space */ 196 for (i = 0; i < SLIMPRO_IIC_MSG_DWORD_COUNT; i++) 197 WRITE_ONCE(ptr[i], cpu_to_le32(msg[i])); 198 } 199 200 static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx) 201 { 202 if (ctx->mbox_client.tx_block || !acpi_disabled) { 203 if (!wait_for_completion_timeout(&ctx->rd_complete, 204 msecs_to_jiffies(MAILBOX_OP_TIMEOUT))) 205 return -ETIMEDOUT; 206 } 207 208 /* Check of invalid data or no device */ 209 if (*ctx->resp_msg == 0xffffffff) 210 return -ENODEV; 211 212 return 0; 213 } 214 215 static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx, 216 u32 *msg, 217 u32 *data) 218 { 219 int rc; 220 221 ctx->resp_msg = data; 222 223 if (!acpi_disabled) { 224 reinit_completion(&ctx->rd_complete); 225 slimpro_i2c_pcc_tx_prepare(ctx, msg); 226 } 227 228 rc = mbox_send_message(ctx->mbox_chan, msg); 229 if (rc < 0) 230 goto err; 231 232 rc = start_i2c_msg_xfer(ctx); 233 234 err: 235 if (!acpi_disabled) 236 mbox_chan_txdone(ctx->mbox_chan, 0); 237 238 ctx->resp_msg = NULL; 239 240 return rc; 241 } 242 243 static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip, 244 u32 addr, u32 addrlen, u32 protocol, 245 u32 readlen, u32 *data) 246 { 247 u32 msg[3]; 248 249 msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, 250 SLIMPRO_IIC_READ, protocol, addrlen, readlen); 251 msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); 252 msg[2] = 0; 253 254 return slimpro_i2c_send_msg(ctx, msg, data); 255 } 256 257 static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip, 258 u32 addr, u32 addrlen, u32 protocol, u32 writelen, 259 u32 data) 260 { 261 u32 msg[3]; 262 263 msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, 264 SLIMPRO_IIC_WRITE, protocol, addrlen, writelen); 265 msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); 266 msg[2] = data; 267 268 return slimpro_i2c_send_msg(ctx, msg, msg); 269 } 270 271 static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr, 272 u32 addrlen, u32 protocol, u32 readlen, 273 u32 with_data_len, void *data) 274 { 275 dma_addr_t paddr; 276 u32 msg[3]; 277 int rc; 278 279 paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen, DMA_FROM_DEVICE); 280 if (dma_mapping_error(ctx->dev, paddr)) { 281 dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", 282 ctx->dma_buffer); 283 return -ENOMEM; 284 } 285 286 msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ, 287 protocol, addrlen, readlen); 288 msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR | 289 SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(with_data_len) | 290 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | 291 SLIMPRO_IIC_ENCODE_ADDR(addr); 292 msg[2] = (u32)paddr; 293 294 rc = slimpro_i2c_send_msg(ctx, msg, msg); 295 296 /* Copy to destination */ 297 memcpy(data, ctx->dma_buffer, readlen); 298 299 dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE); 300 return rc; 301 } 302 303 static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip, 304 u32 addr, u32 addrlen, u32 protocol, u32 writelen, 305 void *data) 306 { 307 dma_addr_t paddr; 308 u32 msg[3]; 309 int rc; 310 311 memcpy(ctx->dma_buffer, data, writelen); 312 paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen, 313 DMA_TO_DEVICE); 314 if (dma_mapping_error(ctx->dev, paddr)) { 315 dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", 316 ctx->dma_buffer); 317 return -ENOMEM; 318 } 319 320 msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE, 321 protocol, addrlen, writelen); 322 msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR | 323 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | 324 SLIMPRO_IIC_ENCODE_ADDR(addr); 325 msg[2] = (u32)paddr; 326 327 if (ctx->mbox_client.tx_block) 328 reinit_completion(&ctx->rd_complete); 329 330 rc = slimpro_i2c_send_msg(ctx, msg, msg); 331 332 dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE); 333 return rc; 334 } 335 336 static int xgene_slimpro_i2c_xfer(struct i2c_adapter *adap, u16 addr, 337 unsigned short flags, char read_write, 338 u8 command, int size, 339 union i2c_smbus_data *data) 340 { 341 struct slimpro_i2c_dev *ctx = i2c_get_adapdata(adap); 342 int ret = -EOPNOTSUPP; 343 u32 val; 344 345 switch (size) { 346 case I2C_SMBUS_BYTE: 347 if (read_write == I2C_SMBUS_READ) { 348 ret = slimpro_i2c_rd(ctx, addr, 0, 0, 349 SLIMPRO_IIC_SMB_PROTOCOL, 350 BYTE_DATA, &val); 351 data->byte = val; 352 } else { 353 ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, 354 SLIMPRO_IIC_SMB_PROTOCOL, 355 0, 0); 356 } 357 break; 358 case I2C_SMBUS_BYTE_DATA: 359 if (read_write == I2C_SMBUS_READ) { 360 ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN, 361 SLIMPRO_IIC_SMB_PROTOCOL, 362 BYTE_DATA, &val); 363 data->byte = val; 364 } else { 365 val = data->byte; 366 ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, 367 SLIMPRO_IIC_SMB_PROTOCOL, 368 BYTE_DATA, val); 369 } 370 break; 371 case I2C_SMBUS_WORD_DATA: 372 if (read_write == I2C_SMBUS_READ) { 373 ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN, 374 SLIMPRO_IIC_SMB_PROTOCOL, 375 WORD_DATA, &val); 376 data->word = val; 377 } else { 378 val = data->word; 379 ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, 380 SLIMPRO_IIC_SMB_PROTOCOL, 381 WORD_DATA, val); 382 } 383 break; 384 case I2C_SMBUS_BLOCK_DATA: 385 if (read_write == I2C_SMBUS_READ) { 386 ret = slimpro_i2c_blkrd(ctx, addr, command, 387 SMBUS_CMD_LEN, 388 SLIMPRO_IIC_SMB_PROTOCOL, 389 I2C_SMBUS_BLOCK_MAX + 1, 390 IIC_SMB_WITH_DATA_LEN, 391 &data->block[0]); 392 393 } else { 394 ret = slimpro_i2c_blkwr(ctx, addr, command, 395 SMBUS_CMD_LEN, 396 SLIMPRO_IIC_SMB_PROTOCOL, 397 data->block[0] + 1, 398 &data->block[0]); 399 } 400 break; 401 case I2C_SMBUS_I2C_BLOCK_DATA: 402 if (read_write == I2C_SMBUS_READ) { 403 ret = slimpro_i2c_blkrd(ctx, addr, 404 command, 405 SMBUS_CMD_LEN, 406 SLIMPRO_IIC_I2C_PROTOCOL, 407 I2C_SMBUS_BLOCK_MAX, 408 IIC_SMB_WITHOUT_DATA_LEN, 409 &data->block[1]); 410 } else { 411 ret = slimpro_i2c_blkwr(ctx, addr, command, 412 SMBUS_CMD_LEN, 413 SLIMPRO_IIC_I2C_PROTOCOL, 414 data->block[0], 415 &data->block[1]); 416 } 417 break; 418 default: 419 break; 420 } 421 return ret; 422 } 423 424 /* 425 * Return list of supported functionality. 426 */ 427 static u32 xgene_slimpro_i2c_func(struct i2c_adapter *adapter) 428 { 429 return I2C_FUNC_SMBUS_BYTE | 430 I2C_FUNC_SMBUS_BYTE_DATA | 431 I2C_FUNC_SMBUS_WORD_DATA | 432 I2C_FUNC_SMBUS_BLOCK_DATA | 433 I2C_FUNC_SMBUS_I2C_BLOCK; 434 } 435 436 static const struct i2c_algorithm xgene_slimpro_i2c_algorithm = { 437 .smbus_xfer = xgene_slimpro_i2c_xfer, 438 .functionality = xgene_slimpro_i2c_func, 439 }; 440 441 static int xgene_slimpro_i2c_probe(struct platform_device *pdev) 442 { 443 struct slimpro_i2c_dev *ctx; 444 struct i2c_adapter *adapter; 445 struct mbox_client *cl; 446 int rc; 447 448 ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); 449 if (!ctx) 450 return -ENOMEM; 451 452 ctx->dev = &pdev->dev; 453 platform_set_drvdata(pdev, ctx); 454 cl = &ctx->mbox_client; 455 456 /* Request mailbox channel */ 457 cl->dev = &pdev->dev; 458 init_completion(&ctx->rd_complete); 459 cl->tx_tout = MAILBOX_OP_TIMEOUT; 460 cl->knows_txdone = false; 461 if (acpi_disabled) { 462 cl->tx_block = true; 463 cl->rx_callback = slimpro_i2c_rx_cb; 464 ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX); 465 if (IS_ERR(ctx->mbox_chan)) { 466 dev_err(&pdev->dev, "i2c mailbox channel request failed\n"); 467 return PTR_ERR(ctx->mbox_chan); 468 } 469 } else { 470 struct pcc_mbox_chan *pcc_chan; 471 const struct acpi_device_id *acpi_id; 472 int version = XGENE_SLIMPRO_I2C_V1; 473 474 acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table, 475 &pdev->dev); 476 if (!acpi_id) 477 return -EINVAL; 478 479 version = (int)acpi_id->driver_data; 480 481 if (device_property_read_u32(&pdev->dev, "pcc-channel", 482 &ctx->mbox_idx)) 483 ctx->mbox_idx = MAILBOX_I2C_INDEX; 484 485 cl->tx_block = false; 486 cl->rx_callback = slimpro_i2c_pcc_rx_cb; 487 pcc_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx); 488 if (IS_ERR(pcc_chan)) { 489 dev_err(&pdev->dev, "PCC mailbox channel request failed\n"); 490 return PTR_ERR(pcc_chan); 491 } 492 493 ctx->pcc_chan = pcc_chan; 494 ctx->mbox_chan = pcc_chan->mchan; 495 496 if (!ctx->mbox_chan->mbox->txdone_irq) { 497 dev_err(&pdev->dev, "PCC IRQ not supported\n"); 498 rc = -ENOENT; 499 goto mbox_err; 500 } 501 502 /* 503 * This is the shared communication region 504 * for the OS and Platform to communicate over. 505 */ 506 ctx->comm_base_addr = pcc_chan->shmem_base_addr; 507 if (ctx->comm_base_addr) { 508 if (version == XGENE_SLIMPRO_I2C_V2) 509 ctx->pcc_comm_addr = memremap( 510 ctx->comm_base_addr, 511 pcc_chan->shmem_size, 512 MEMREMAP_WT); 513 else 514 ctx->pcc_comm_addr = memremap( 515 ctx->comm_base_addr, 516 pcc_chan->shmem_size, 517 MEMREMAP_WB); 518 } else { 519 dev_err(&pdev->dev, "Failed to get PCC comm region\n"); 520 rc = -ENOENT; 521 goto mbox_err; 522 } 523 524 if (!ctx->pcc_comm_addr) { 525 dev_err(&pdev->dev, 526 "Failed to ioremap PCC comm region\n"); 527 rc = -ENOMEM; 528 goto mbox_err; 529 } 530 } 531 rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); 532 if (rc) 533 dev_warn(&pdev->dev, "Unable to set dma mask\n"); 534 535 /* Setup I2C adapter */ 536 adapter = &ctx->adapter; 537 snprintf(adapter->name, sizeof(adapter->name), "MAILBOX I2C"); 538 adapter->algo = &xgene_slimpro_i2c_algorithm; 539 adapter->class = I2C_CLASS_HWMON; 540 adapter->dev.parent = &pdev->dev; 541 adapter->dev.of_node = pdev->dev.of_node; 542 ACPI_COMPANION_SET(&adapter->dev, ACPI_COMPANION(&pdev->dev)); 543 i2c_set_adapdata(adapter, ctx); 544 rc = i2c_add_adapter(adapter); 545 if (rc) 546 goto mbox_err; 547 548 dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n"); 549 return 0; 550 551 mbox_err: 552 if (acpi_disabled) 553 mbox_free_channel(ctx->mbox_chan); 554 else 555 pcc_mbox_free_channel(ctx->pcc_chan); 556 557 return rc; 558 } 559 560 static int xgene_slimpro_i2c_remove(struct platform_device *pdev) 561 { 562 struct slimpro_i2c_dev *ctx = platform_get_drvdata(pdev); 563 564 i2c_del_adapter(&ctx->adapter); 565 566 if (acpi_disabled) 567 mbox_free_channel(ctx->mbox_chan); 568 else 569 pcc_mbox_free_channel(ctx->pcc_chan); 570 571 return 0; 572 } 573 574 static const struct of_device_id xgene_slimpro_i2c_dt_ids[] = { 575 {.compatible = "apm,xgene-slimpro-i2c" }, 576 {}, 577 }; 578 MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids); 579 580 #ifdef CONFIG_ACPI 581 static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = { 582 {"APMC0D40", XGENE_SLIMPRO_I2C_V1}, 583 {"APMC0D8B", XGENE_SLIMPRO_I2C_V2}, 584 {} 585 }; 586 MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids); 587 #endif 588 589 static struct platform_driver xgene_slimpro_i2c_driver = { 590 .probe = xgene_slimpro_i2c_probe, 591 .remove = xgene_slimpro_i2c_remove, 592 .driver = { 593 .name = "xgene-slimpro-i2c", 594 .of_match_table = of_match_ptr(xgene_slimpro_i2c_dt_ids), 595 .acpi_match_table = ACPI_PTR(xgene_slimpro_i2c_acpi_ids) 596 }, 597 }; 598 599 module_platform_driver(xgene_slimpro_i2c_driver); 600 601 MODULE_DESCRIPTION("APM X-Gene SLIMpro I2C driver"); 602 MODULE_AUTHOR("Feng Kan <fkan@apm.com>"); 603 MODULE_AUTHOR("Hieu Le <hnle@apm.com>"); 604 MODULE_LICENSE("GPL"); 605