1 /* 2 Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and 3 Philip Edelbrock <phil@netroedge.com> 4 5 This program is free software; you can redistribute it and/or modify 6 it under the terms of the GNU General Public License as published by 7 the Free Software Foundation; either version 2 of the License, or 8 (at your option) any later version. 9 10 This program is distributed in the hope that it will be useful, 11 but WITHOUT ANY WARRANTY; without even the implied warranty of 12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 GNU General Public License for more details. 14 15 You should have received a copy of the GNU General Public License 16 along with this program; if not, write to the Free Software 17 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 18 */ 19 20 /* Note: we assume there can only be one SIS5595 with one SMBus interface */ 21 22 /* 23 Note: all have mfr. ID 0x1039. 24 SUPPORTED PCI ID 25 5595 0008 26 27 Note: these chips contain a 0008 device which is incompatible with the 28 5595. We recognize these by the presence of the listed 29 "blacklist" PCI ID and refuse to load. 30 31 NOT SUPPORTED PCI ID BLACKLIST PCI ID 32 540 0008 0540 33 550 0008 0550 34 5513 0008 5511 35 5581 0008 5597 36 5582 0008 5597 37 5597 0008 5597 38 5598 0008 5597/5598 39 630 0008 0630 40 645 0008 0645 41 646 0008 0646 42 648 0008 0648 43 650 0008 0650 44 651 0008 0651 45 730 0008 0730 46 735 0008 0735 47 745 0008 0745 48 746 0008 0746 49 */ 50 51 /* TO DO: 52 * Add Block Transfers (ugly, but supported by the adapter) 53 * Add adapter resets 54 */ 55 56 #include <linux/kernel.h> 57 #include <linux/module.h> 58 #include <linux/delay.h> 59 #include <linux/pci.h> 60 #include <linux/ioport.h> 61 #include <linux/init.h> 62 #include <linux/i2c.h> 63 #include <linux/acpi.h> 64 #include <asm/io.h> 65 66 static int blacklist[] = { 67 PCI_DEVICE_ID_SI_540, 68 PCI_DEVICE_ID_SI_550, 69 PCI_DEVICE_ID_SI_630, 70 PCI_DEVICE_ID_SI_645, 71 PCI_DEVICE_ID_SI_646, 72 PCI_DEVICE_ID_SI_648, 73 PCI_DEVICE_ID_SI_650, 74 PCI_DEVICE_ID_SI_651, 75 PCI_DEVICE_ID_SI_730, 76 PCI_DEVICE_ID_SI_735, 77 PCI_DEVICE_ID_SI_745, 78 PCI_DEVICE_ID_SI_746, 79 PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but that ID 80 shows up in other chips so we use the 5511 81 ID for recognition */ 82 PCI_DEVICE_ID_SI_5597, 83 PCI_DEVICE_ID_SI_5598, 84 0, /* terminates the list */ 85 }; 86 87 /* Length of ISA address segment */ 88 #define SIS5595_EXTENT 8 89 /* SIS5595 SMBus registers */ 90 #define SMB_STS_LO 0x00 91 #define SMB_STS_HI 0x01 92 #define SMB_CTL_LO 0x02 93 #define SMB_CTL_HI 0x03 94 #define SMB_ADDR 0x04 95 #define SMB_CMD 0x05 96 #define SMB_PCNT 0x06 97 #define SMB_CNT 0x07 98 #define SMB_BYTE 0x08 99 #define SMB_DEV 0x10 100 #define SMB_DB0 0x11 101 #define SMB_DB1 0x12 102 #define SMB_HAA 0x13 103 104 /* PCI Address Constants */ 105 #define SMB_INDEX 0x38 106 #define SMB_DAT 0x39 107 #define SIS5595_ENABLE_REG 0x40 108 #define ACPI_BASE 0x90 109 110 /* Other settings */ 111 #define MAX_TIMEOUT 500 112 113 /* SIS5595 constants */ 114 #define SIS5595_QUICK 0x00 115 #define SIS5595_BYTE 0x02 116 #define SIS5595_BYTE_DATA 0x04 117 #define SIS5595_WORD_DATA 0x06 118 #define SIS5595_PROC_CALL 0x08 119 #define SIS5595_BLOCK_DATA 0x0A 120 121 /* insmod parameters */ 122 123 /* If force_addr is set to anything different from 0, we forcibly enable 124 the device at the given address. */ 125 static u16 force_addr; 126 module_param(force_addr, ushort, 0); 127 MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); 128 129 static struct pci_driver sis5595_driver; 130 static unsigned short sis5595_base; 131 static struct pci_dev *sis5595_pdev; 132 133 static u8 sis5595_read(u8 reg) 134 { 135 outb(reg, sis5595_base + SMB_INDEX); 136 return inb(sis5595_base + SMB_DAT); 137 } 138 139 static void sis5595_write(u8 reg, u8 data) 140 { 141 outb(reg, sis5595_base + SMB_INDEX); 142 outb(data, sis5595_base + SMB_DAT); 143 } 144 145 static int sis5595_setup(struct pci_dev *SIS5595_dev) 146 { 147 u16 a; 148 u8 val; 149 int *i; 150 int retval = -ENODEV; 151 152 /* Look for imposters */ 153 for (i = blacklist; *i != 0; i++) { 154 struct pci_dev *dev; 155 dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL); 156 if (dev) { 157 dev_err(&SIS5595_dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i); 158 pci_dev_put(dev); 159 return -ENODEV; 160 } 161 } 162 163 /* Determine the address of the SMBus areas */ 164 pci_read_config_word(SIS5595_dev, ACPI_BASE, &sis5595_base); 165 if (sis5595_base == 0 && force_addr == 0) { 166 dev_err(&SIS5595_dev->dev, "ACPI base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n"); 167 return -ENODEV; 168 } 169 170 if (force_addr) 171 sis5595_base = force_addr & ~(SIS5595_EXTENT - 1); 172 dev_dbg(&SIS5595_dev->dev, "ACPI Base address: %04x\n", sis5595_base); 173 174 /* NB: We grab just the two SMBus registers here, but this may still 175 * interfere with ACPI :-( */ 176 retval = acpi_check_region(sis5595_base + SMB_INDEX, 2, 177 sis5595_driver.name); 178 if (retval) 179 return retval; 180 181 if (!request_region(sis5595_base + SMB_INDEX, 2, 182 sis5595_driver.name)) { 183 dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n", 184 sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1); 185 return -ENODEV; 186 } 187 188 if (force_addr) { 189 dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base); 190 if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base) 191 != PCIBIOS_SUCCESSFUL) 192 goto error; 193 if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a) 194 != PCIBIOS_SUCCESSFUL) 195 goto error; 196 if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) { 197 /* doesn't work for some chips! */ 198 dev_err(&SIS5595_dev->dev, "force address failed - not supported?\n"); 199 goto error; 200 } 201 } 202 203 if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val) 204 != PCIBIOS_SUCCESSFUL) 205 goto error; 206 if ((val & 0x80) == 0) { 207 dev_info(&SIS5595_dev->dev, "enabling ACPI\n"); 208 if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80) 209 != PCIBIOS_SUCCESSFUL) 210 goto error; 211 if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val) 212 != PCIBIOS_SUCCESSFUL) 213 goto error; 214 if ((val & 0x80) == 0) { 215 /* doesn't work for some chips? */ 216 dev_err(&SIS5595_dev->dev, "ACPI enable failed - not supported?\n"); 217 goto error; 218 } 219 } 220 221 /* Everything is happy */ 222 return 0; 223 224 error: 225 release_region(sis5595_base + SMB_INDEX, 2); 226 return retval; 227 } 228 229 static int sis5595_transaction(struct i2c_adapter *adap) 230 { 231 int temp; 232 int result = 0; 233 int timeout = 0; 234 235 /* Make sure the SMBus host is ready to start transmitting */ 236 temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); 237 if (temp != 0x00) { 238 dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting...\n", temp); 239 sis5595_write(SMB_STS_LO, temp & 0xff); 240 sis5595_write(SMB_STS_HI, temp >> 8); 241 if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) { 242 dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); 243 return -EBUSY; 244 } else { 245 dev_dbg(&adap->dev, "Successful!\n"); 246 } 247 } 248 249 /* start the transaction by setting bit 4 */ 250 sis5595_write(SMB_CTL_LO, sis5595_read(SMB_CTL_LO) | 0x10); 251 252 /* We will always wait for a fraction of a second! */ 253 do { 254 msleep(1); 255 temp = sis5595_read(SMB_STS_LO); 256 } while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT)); 257 258 /* If the SMBus is still busy, we give up */ 259 if (timeout > MAX_TIMEOUT) { 260 dev_dbg(&adap->dev, "SMBus Timeout!\n"); 261 result = -ETIMEDOUT; 262 } 263 264 if (temp & 0x10) { 265 dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); 266 result = -ENXIO; 267 } 268 269 if (temp & 0x20) { 270 dev_err(&adap->dev, "Bus collision! SMBus may be locked until " 271 "next hard reset (or not...)\n"); 272 /* Clock stops and slave is stuck in mid-transmission */ 273 result = -EIO; 274 } 275 276 temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); 277 if (temp != 0x00) { 278 sis5595_write(SMB_STS_LO, temp & 0xff); 279 sis5595_write(SMB_STS_HI, temp >> 8); 280 } 281 282 temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); 283 if (temp != 0x00) 284 dev_dbg(&adap->dev, "Failed reset at end of transaction (%02x)\n", temp); 285 286 return result; 287 } 288 289 /* Return negative errno on error. */ 290 static s32 sis5595_access(struct i2c_adapter *adap, u16 addr, 291 unsigned short flags, char read_write, 292 u8 command, int size, union i2c_smbus_data *data) 293 { 294 int status; 295 296 switch (size) { 297 case I2C_SMBUS_QUICK: 298 sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); 299 size = SIS5595_QUICK; 300 break; 301 case I2C_SMBUS_BYTE: 302 sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); 303 if (read_write == I2C_SMBUS_WRITE) 304 sis5595_write(SMB_CMD, command); 305 size = SIS5595_BYTE; 306 break; 307 case I2C_SMBUS_BYTE_DATA: 308 sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); 309 sis5595_write(SMB_CMD, command); 310 if (read_write == I2C_SMBUS_WRITE) 311 sis5595_write(SMB_BYTE, data->byte); 312 size = SIS5595_BYTE_DATA; 313 break; 314 case I2C_SMBUS_PROC_CALL: 315 case I2C_SMBUS_WORD_DATA: 316 sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); 317 sis5595_write(SMB_CMD, command); 318 if (read_write == I2C_SMBUS_WRITE) { 319 sis5595_write(SMB_BYTE, data->word & 0xff); 320 sis5595_write(SMB_BYTE + 1, 321 (data->word & 0xff00) >> 8); 322 } 323 size = (size == I2C_SMBUS_PROC_CALL) ? SIS5595_PROC_CALL : SIS5595_WORD_DATA; 324 break; 325 default: 326 dev_warn(&adap->dev, "Unsupported transaction %d\n", size); 327 return -EOPNOTSUPP; 328 } 329 330 sis5595_write(SMB_CTL_LO, ((size & 0x0E))); 331 332 status = sis5595_transaction(adap); 333 if (status) 334 return status; 335 336 if ((size != SIS5595_PROC_CALL) && 337 ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK))) 338 return 0; 339 340 341 switch (size) { 342 case SIS5595_BYTE: 343 case SIS5595_BYTE_DATA: 344 data->byte = sis5595_read(SMB_BYTE); 345 break; 346 case SIS5595_WORD_DATA: 347 case SIS5595_PROC_CALL: 348 data->word = sis5595_read(SMB_BYTE) + (sis5595_read(SMB_BYTE + 1) << 8); 349 break; 350 } 351 return 0; 352 } 353 354 static u32 sis5595_func(struct i2c_adapter *adapter) 355 { 356 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 357 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 358 I2C_FUNC_SMBUS_PROC_CALL; 359 } 360 361 static const struct i2c_algorithm smbus_algorithm = { 362 .smbus_xfer = sis5595_access, 363 .functionality = sis5595_func, 364 }; 365 366 static struct i2c_adapter sis5595_adapter = { 367 .owner = THIS_MODULE, 368 .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, 369 .algo = &smbus_algorithm, 370 }; 371 372 static struct pci_device_id sis5595_ids[] __devinitdata = { 373 { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, 374 { 0, } 375 }; 376 377 MODULE_DEVICE_TABLE (pci, sis5595_ids); 378 379 static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id) 380 { 381 int err; 382 383 if (sis5595_setup(dev)) { 384 dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n"); 385 return -ENODEV; 386 } 387 388 /* set up the sysfs linkage to our parent device */ 389 sis5595_adapter.dev.parent = &dev->dev; 390 391 snprintf(sis5595_adapter.name, sizeof(sis5595_adapter.name), 392 "SMBus SIS5595 adapter at %04x", sis5595_base + SMB_INDEX); 393 err = i2c_add_adapter(&sis5595_adapter); 394 if (err) { 395 release_region(sis5595_base + SMB_INDEX, 2); 396 return err; 397 } 398 399 /* Always return failure here. This is to allow other drivers to bind 400 * to this pci device. We don't really want to have control over the 401 * pci device, we only wanted to read as few register values from it. 402 */ 403 sis5595_pdev = pci_dev_get(dev); 404 return -ENODEV; 405 } 406 407 static struct pci_driver sis5595_driver = { 408 .name = "sis5595_smbus", 409 .id_table = sis5595_ids, 410 .probe = sis5595_probe, 411 }; 412 413 static int __init i2c_sis5595_init(void) 414 { 415 return pci_register_driver(&sis5595_driver); 416 } 417 418 static void __exit i2c_sis5595_exit(void) 419 { 420 pci_unregister_driver(&sis5595_driver); 421 if (sis5595_pdev) { 422 i2c_del_adapter(&sis5595_adapter); 423 release_region(sis5595_base + SMB_INDEX, 2); 424 pci_dev_put(sis5595_pdev); 425 sis5595_pdev = NULL; 426 } 427 } 428 429 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); 430 MODULE_DESCRIPTION("SIS5595 SMBus driver"); 431 MODULE_LICENSE("GPL"); 432 433 module_init(i2c_sis5595_init); 434 module_exit(i2c_sis5595_exit); 435