1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * This is a combined i2c adapter and algorithm driver for the 4 * MPC107/Tsi107 PowerPC northbridge and processors that include 5 * the same I2C unit (8240, 8245, 85xx). 6 * 7 * Copyright (C) 2003-2004 Humboldt Solutions Ltd, adrian@humboldt.co.uk 8 * Copyright (C) 2021 Allied Telesis Labs 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/sched/signal.h> 14 #include <linux/of.h> 15 #include <linux/of_address.h> 16 #include <linux/of_irq.h> 17 #include <linux/platform_device.h> 18 #include <linux/property.h> 19 #include <linux/slab.h> 20 21 #include <linux/clk.h> 22 #include <linux/io.h> 23 #include <linux/iopoll.h> 24 #include <linux/fsl_devices.h> 25 #include <linux/i2c.h> 26 #include <linux/interrupt.h> 27 #include <linux/delay.h> 28 29 #include <asm/mpc52xx.h> 30 #include <asm/mpc85xx.h> 31 #include <sysdev/fsl_soc.h> 32 33 #define MPC_I2C_CLOCK_LEGACY 0 34 #define MPC_I2C_CLOCK_PRESERVE (~0U) 35 36 #define MPC_I2C_FDR 0x04 37 #define MPC_I2C_CR 0x08 38 #define MPC_I2C_SR 0x0c 39 #define MPC_I2C_DR 0x10 40 #define MPC_I2C_DFSRR 0x14 41 42 #define CCR_MEN 0x80 43 #define CCR_MIEN 0x40 44 #define CCR_MSTA 0x20 45 #define CCR_MTX 0x10 46 #define CCR_TXAK 0x08 47 #define CCR_RSTA 0x04 48 #define CCR_RSVD 0x02 49 50 #define CSR_MCF 0x80 51 #define CSR_MAAS 0x40 52 #define CSR_MBB 0x20 53 #define CSR_MAL 0x10 54 #define CSR_SRW 0x04 55 #define CSR_MIF 0x02 56 #define CSR_RXAK 0x01 57 58 enum mpc_i2c_action { 59 MPC_I2C_ACTION_START = 1, 60 MPC_I2C_ACTION_RESTART, 61 MPC_I2C_ACTION_READ_BEGIN, 62 MPC_I2C_ACTION_READ_BYTE, 63 MPC_I2C_ACTION_WRITE, 64 MPC_I2C_ACTION_STOP, 65 66 __MPC_I2C_ACTION_CNT 67 }; 68 69 static const char * const action_str[] = { 70 "invalid", 71 "start", 72 "restart", 73 "read begin", 74 "read", 75 "write", 76 "stop", 77 }; 78 79 static_assert(ARRAY_SIZE(action_str) == __MPC_I2C_ACTION_CNT); 80 81 struct mpc_i2c { 82 struct device *dev; 83 void __iomem *base; 84 u32 interrupt; 85 wait_queue_head_t waitq; 86 spinlock_t lock; 87 struct i2c_adapter adap; 88 int irq; 89 u32 real_clk; 90 u8 fdr, dfsrr; 91 struct clk *clk_per; 92 u32 cntl_bits; 93 enum mpc_i2c_action action; 94 struct i2c_msg *msgs; 95 int num_msgs; 96 int curr_msg; 97 u32 byte_posn; 98 u32 block; 99 int rc; 100 int expect_rxack; 101 bool has_errata_A004447; 102 }; 103 104 struct mpc_i2c_divider { 105 u16 divider; 106 u16 fdr; /* including dfsrr */ 107 }; 108 109 struct mpc_i2c_data { 110 void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock); 111 }; 112 113 static inline void writeccr(struct mpc_i2c *i2c, u32 x) 114 { 115 writeb(x, i2c->base + MPC_I2C_CR); 116 } 117 118 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release 119 * the bus, because it wants to send ACK. 120 * Following sequence of enabling/disabling and sending start/stop generates 121 * the 9 pulses, each with a START then ending with STOP, so it's all OK. 122 */ 123 static void mpc_i2c_fixup(struct mpc_i2c *i2c) 124 { 125 int k; 126 unsigned long flags; 127 128 for (k = 9; k; k--) { 129 writeccr(i2c, 0); 130 writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */ 131 writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */ 132 readb(i2c->base + MPC_I2C_DR); /* init xfer */ 133 udelay(15); /* let it hit the bus */ 134 local_irq_save(flags); /* should not be delayed further */ 135 writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */ 136 readb(i2c->base + MPC_I2C_DR); 137 if (k != 1) 138 udelay(5); 139 local_irq_restore(flags); 140 } 141 writeccr(i2c, CCR_MEN); /* Initiate STOP */ 142 readb(i2c->base + MPC_I2C_DR); 143 udelay(15); /* Let STOP propagate */ 144 writeccr(i2c, 0); 145 } 146 147 static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask) 148 { 149 void __iomem *addr = i2c->base + MPC_I2C_SR; 150 u8 val; 151 152 return readb_poll_timeout(addr, val, val & mask, 0, 100); 153 } 154 155 /* 156 * Workaround for Erratum A004447. From the P2040CE Rev Q 157 * 158 * 1. Set up the frequency divider and sampling rate. 159 * 2. I2CCR - a0h 160 * 3. Poll for I2CSR[MBB] to get set. 161 * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to 162 * step 5. If MAL is not set, then go to step 13. 163 * 5. I2CCR - 00h 164 * 6. I2CCR - 22h 165 * 7. I2CCR - a2h 166 * 8. Poll for I2CSR[MBB] to get set. 167 * 9. Issue read to I2CDR. 168 * 10. Poll for I2CSR[MIF] to be set. 169 * 11. I2CCR - 82h 170 * 12. Workaround complete. Skip the next steps. 171 * 13. Issue read to I2CDR. 172 * 14. Poll for I2CSR[MIF] to be set. 173 * 15. I2CCR - 80h 174 */ 175 static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c) 176 { 177 int ret; 178 u32 val; 179 180 writeccr(i2c, CCR_MEN | CCR_MSTA); 181 ret = i2c_mpc_wait_sr(i2c, CSR_MBB); 182 if (ret) { 183 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); 184 return; 185 } 186 187 val = readb(i2c->base + MPC_I2C_SR); 188 189 if (val & CSR_MAL) { 190 writeccr(i2c, 0x00); 191 writeccr(i2c, CCR_MSTA | CCR_RSVD); 192 writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD); 193 ret = i2c_mpc_wait_sr(i2c, CSR_MBB); 194 if (ret) { 195 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); 196 return; 197 } 198 val = readb(i2c->base + MPC_I2C_DR); 199 ret = i2c_mpc_wait_sr(i2c, CSR_MIF); 200 if (ret) { 201 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); 202 return; 203 } 204 writeccr(i2c, CCR_MEN | CCR_RSVD); 205 } else { 206 val = readb(i2c->base + MPC_I2C_DR); 207 ret = i2c_mpc_wait_sr(i2c, CSR_MIF); 208 if (ret) { 209 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); 210 return; 211 } 212 writeccr(i2c, CCR_MEN); 213 } 214 } 215 216 #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) 217 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { 218 {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, 219 {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, 220 {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28}, 221 {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a}, 222 {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09}, 223 {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81}, 224 {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30}, 225 {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32}, 226 {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10}, 227 {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a}, 228 {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14}, 229 {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17}, 230 {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d}, 231 {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c}, 232 {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f}, 233 {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e}, 234 {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c}, 235 {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f} 236 }; 237 238 static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, 239 u32 *real_clk) 240 { 241 struct fwnode_handle *fwnode = of_fwnode_handle(node); 242 const struct mpc_i2c_divider *div = NULL; 243 unsigned int pvr = mfspr(SPRN_PVR); 244 u32 divider; 245 int i; 246 247 if (clock == MPC_I2C_CLOCK_LEGACY) { 248 /* see below - default fdr = 0x3f -> div = 2048 */ 249 *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / 2048; 250 return -EINVAL; 251 } 252 253 /* Determine divider value */ 254 divider = mpc5xxx_fwnode_get_bus_frequency(fwnode) / clock; 255 256 /* 257 * We want to choose an FDR/DFSR that generates an I2C bus speed that 258 * is equal to or lower than the requested speed. 259 */ 260 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { 261 div = &mpc_i2c_dividers_52xx[i]; 262 /* Old MPC5200 rev A CPUs do not support the high bits */ 263 if (div->fdr & 0xc0 && pvr == 0x80822011) 264 continue; 265 if (div->divider >= divider) 266 break; 267 } 268 269 *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / div->divider; 270 return (int)div->fdr; 271 } 272 273 static void mpc_i2c_setup_52xx(struct device_node *node, 274 struct mpc_i2c *i2c, 275 u32 clock) 276 { 277 int ret, fdr; 278 279 if (clock == MPC_I2C_CLOCK_PRESERVE) { 280 dev_dbg(i2c->dev, "using fdr %d\n", 281 readb(i2c->base + MPC_I2C_FDR)); 282 return; 283 } 284 285 ret = mpc_i2c_get_fdr_52xx(node, clock, &i2c->real_clk); 286 fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ 287 288 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); 289 290 if (ret >= 0) 291 dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk, 292 fdr); 293 } 294 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ 295 static void mpc_i2c_setup_52xx(struct device_node *node, 296 struct mpc_i2c *i2c, 297 u32 clock) 298 { 299 } 300 #endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */ 301 302 #ifdef CONFIG_PPC_MPC512x 303 static void mpc_i2c_setup_512x(struct device_node *node, 304 struct mpc_i2c *i2c, 305 u32 clock) 306 { 307 struct device_node *node_ctrl; 308 void __iomem *ctrl; 309 u32 idx; 310 311 /* Enable I2C interrupts for mpc5121 */ 312 node_ctrl = of_find_compatible_node(NULL, NULL, 313 "fsl,mpc5121-i2c-ctrl"); 314 if (node_ctrl) { 315 ctrl = of_iomap(node_ctrl, 0); 316 if (ctrl) { 317 u64 addr; 318 /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */ 319 of_property_read_reg(node, 0, &addr, NULL); 320 idx = (addr & 0xff) / 0x20; 321 setbits32(ctrl, 1 << (24 + idx * 2)); 322 iounmap(ctrl); 323 } 324 of_node_put(node_ctrl); 325 } 326 327 /* The clock setup for the 52xx works also fine for the 512x */ 328 mpc_i2c_setup_52xx(node, i2c, clock); 329 } 330 #else /* CONFIG_PPC_MPC512x */ 331 static void mpc_i2c_setup_512x(struct device_node *node, 332 struct mpc_i2c *i2c, 333 u32 clock) 334 { 335 } 336 #endif /* CONFIG_PPC_MPC512x */ 337 338 #ifdef CONFIG_FSL_SOC 339 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { 340 {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123}, 341 {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102}, 342 {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127}, 343 {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105}, 344 {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106}, 345 {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107}, 346 {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07}, 347 {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a}, 348 {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b}, 349 {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e}, 350 {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133}, 351 {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136}, 352 {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115}, 353 {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b}, 354 {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e}, 355 {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d}, 356 {49152, 0x011e}, {61440, 0x011f} 357 }; 358 359 static u32 mpc_i2c_get_sec_cfg_8xxx(void) 360 { 361 struct device_node *node; 362 u32 __iomem *reg; 363 u32 val = 0; 364 365 node = of_find_node_by_name(NULL, "global-utilities"); 366 if (node) { 367 const u32 *prop = of_get_property(node, "reg", NULL); 368 if (prop) { 369 /* 370 * Map and check POR Device Status Register 2 371 * (PORDEVSR2) at 0xE0014. Note than while MPC8533 372 * and MPC8544 indicate SEC frequency ratio 373 * configuration as bit 26 in PORDEVSR2, other MPC8xxx 374 * parts may store it differently or may not have it 375 * at all. 376 */ 377 reg = ioremap(get_immrbase() + *prop + 0x14, 0x4); 378 if (!reg) 379 printk(KERN_ERR 380 "Error: couldn't map PORDEVSR2\n"); 381 else 382 val = in_be32(reg) & 0x00000020; /* sec-cfg */ 383 iounmap(reg); 384 } 385 } 386 of_node_put(node); 387 388 return val; 389 } 390 391 static u32 mpc_i2c_get_prescaler_8xxx(void) 392 { 393 /* 394 * According to the AN2919 all MPC824x have prescaler 1, while MPC83xx 395 * may have prescaler 1, 2, or 3, depending on the power-on 396 * configuration. 397 */ 398 u32 prescaler = 1; 399 400 /* mpc85xx */ 401 if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2) 402 || pvr_version_is(PVR_VER_E500MC) 403 || pvr_version_is(PVR_VER_E5500) 404 || pvr_version_is(PVR_VER_E6500)) { 405 unsigned int svr = mfspr(SPRN_SVR); 406 407 if ((SVR_SOC_VER(svr) == SVR_8540) 408 || (SVR_SOC_VER(svr) == SVR_8541) 409 || (SVR_SOC_VER(svr) == SVR_8560) 410 || (SVR_SOC_VER(svr) == SVR_8555) 411 || (SVR_SOC_VER(svr) == SVR_8610)) 412 /* the above 85xx SoCs have prescaler 1 */ 413 prescaler = 1; 414 else if ((SVR_SOC_VER(svr) == SVR_8533) 415 || (SVR_SOC_VER(svr) == SVR_8544)) 416 /* the above 85xx SoCs have prescaler 3 or 2 */ 417 prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2; 418 else 419 /* all the other 85xx have prescaler 2 */ 420 prescaler = 2; 421 } 422 423 return prescaler; 424 } 425 426 static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, 427 u32 *real_clk) 428 { 429 const struct mpc_i2c_divider *div = NULL; 430 u32 prescaler = mpc_i2c_get_prescaler_8xxx(); 431 u32 divider; 432 int i; 433 434 if (clock == MPC_I2C_CLOCK_LEGACY) { 435 /* see below - default fdr = 0x1031 -> div = 16 * 3072 */ 436 *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072); 437 return -EINVAL; 438 } 439 440 divider = fsl_get_sys_freq() / clock / prescaler; 441 442 pr_debug("I2C: src_clock=%d clock=%d divider=%d\n", 443 fsl_get_sys_freq(), clock, divider); 444 445 /* 446 * We want to choose an FDR/DFSR that generates an I2C bus speed that 447 * is equal to or lower than the requested speed. 448 */ 449 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) { 450 div = &mpc_i2c_dividers_8xxx[i]; 451 if (div->divider >= divider) 452 break; 453 } 454 455 *real_clk = fsl_get_sys_freq() / prescaler / div->divider; 456 return (int)div->fdr; 457 } 458 459 static void mpc_i2c_setup_8xxx(struct device_node *node, 460 struct mpc_i2c *i2c, 461 u32 clock) 462 { 463 int ret, fdr; 464 465 if (clock == MPC_I2C_CLOCK_PRESERVE) { 466 dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n", 467 readb(i2c->base + MPC_I2C_DFSRR), 468 readb(i2c->base + MPC_I2C_FDR)); 469 return; 470 } 471 472 ret = mpc_i2c_get_fdr_8xxx(node, clock, &i2c->real_clk); 473 fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ 474 475 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); 476 writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); 477 478 if (ret >= 0) 479 dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", 480 i2c->real_clk, fdr >> 8, fdr & 0xff); 481 } 482 483 #else /* !CONFIG_FSL_SOC */ 484 static void mpc_i2c_setup_8xxx(struct device_node *node, 485 struct mpc_i2c *i2c, 486 u32 clock) 487 { 488 } 489 #endif /* CONFIG_FSL_SOC */ 490 491 static void mpc_i2c_finish(struct mpc_i2c *i2c, int rc) 492 { 493 i2c->rc = rc; 494 i2c->block = 0; 495 i2c->cntl_bits = CCR_MEN; 496 writeccr(i2c, i2c->cntl_bits); 497 wake_up(&i2c->waitq); 498 } 499 500 static void mpc_i2c_do_action(struct mpc_i2c *i2c) 501 { 502 struct i2c_msg *msg = NULL; 503 int dir = 0; 504 int recv_len = 0; 505 u8 byte; 506 507 dev_dbg(i2c->dev, "action = %s\n", action_str[i2c->action]); 508 509 i2c->cntl_bits &= ~(CCR_RSTA | CCR_MTX | CCR_TXAK); 510 511 if (i2c->action != MPC_I2C_ACTION_STOP) { 512 msg = &i2c->msgs[i2c->curr_msg]; 513 if (msg->flags & I2C_M_RD) 514 dir = 1; 515 if (msg->flags & I2C_M_RECV_LEN) 516 recv_len = 1; 517 } 518 519 switch (i2c->action) { 520 case MPC_I2C_ACTION_RESTART: 521 i2c->cntl_bits |= CCR_RSTA; 522 fallthrough; 523 524 case MPC_I2C_ACTION_START: 525 i2c->cntl_bits |= CCR_MSTA | CCR_MTX; 526 writeccr(i2c, i2c->cntl_bits); 527 writeb((msg->addr << 1) | dir, i2c->base + MPC_I2C_DR); 528 i2c->expect_rxack = 1; 529 i2c->action = dir ? MPC_I2C_ACTION_READ_BEGIN : MPC_I2C_ACTION_WRITE; 530 break; 531 532 case MPC_I2C_ACTION_READ_BEGIN: 533 if (msg->len) { 534 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) 535 i2c->cntl_bits |= CCR_TXAK; 536 537 writeccr(i2c, i2c->cntl_bits); 538 /* Dummy read */ 539 readb(i2c->base + MPC_I2C_DR); 540 } 541 i2c->action = MPC_I2C_ACTION_READ_BYTE; 542 break; 543 544 case MPC_I2C_ACTION_READ_BYTE: 545 if (i2c->byte_posn || !recv_len) { 546 /* Generate Tx ACK on next to last byte */ 547 if (i2c->byte_posn == msg->len - 2) 548 i2c->cntl_bits |= CCR_TXAK; 549 /* Do not generate stop on last byte */ 550 if (i2c->byte_posn == msg->len - 1) 551 i2c->cntl_bits |= CCR_MTX; 552 553 writeccr(i2c, i2c->cntl_bits); 554 } 555 556 byte = readb(i2c->base + MPC_I2C_DR); 557 558 if (i2c->byte_posn == 0 && recv_len) { 559 if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) { 560 mpc_i2c_finish(i2c, -EPROTO); 561 return; 562 } 563 msg->len += byte; 564 /* 565 * For block reads, generate Tx ACK here if data length 566 * is 1 byte (total length is 2 bytes). 567 */ 568 if (msg->len == 2) { 569 i2c->cntl_bits |= CCR_TXAK; 570 writeccr(i2c, i2c->cntl_bits); 571 } 572 } 573 574 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], byte); 575 msg->buf[i2c->byte_posn++] = byte; 576 break; 577 578 case MPC_I2C_ACTION_WRITE: 579 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], 580 msg->buf[i2c->byte_posn]); 581 writeb(msg->buf[i2c->byte_posn++], i2c->base + MPC_I2C_DR); 582 i2c->expect_rxack = 1; 583 break; 584 585 case MPC_I2C_ACTION_STOP: 586 mpc_i2c_finish(i2c, 0); 587 break; 588 589 default: 590 WARN(1, "Unexpected action %d\n", i2c->action); 591 break; 592 } 593 594 if (msg && msg->len == i2c->byte_posn) { 595 i2c->curr_msg++; 596 i2c->byte_posn = 0; 597 598 if (i2c->curr_msg == i2c->num_msgs) { 599 i2c->action = MPC_I2C_ACTION_STOP; 600 /* 601 * We don't get another interrupt on read so 602 * finish the transfer now 603 */ 604 if (dir) 605 mpc_i2c_finish(i2c, 0); 606 } else { 607 i2c->action = MPC_I2C_ACTION_RESTART; 608 } 609 } 610 } 611 612 static void mpc_i2c_do_intr(struct mpc_i2c *i2c, u8 status) 613 { 614 spin_lock(&i2c->lock); 615 616 if (!(status & CSR_MCF)) { 617 dev_dbg(i2c->dev, "unfinished\n"); 618 mpc_i2c_finish(i2c, -EIO); 619 goto out; 620 } 621 622 if (status & CSR_MAL) { 623 dev_dbg(i2c->dev, "arbitration lost\n"); 624 mpc_i2c_finish(i2c, -EAGAIN); 625 goto out; 626 } 627 628 if (i2c->expect_rxack && (status & CSR_RXAK)) { 629 dev_dbg(i2c->dev, "no Rx ACK\n"); 630 mpc_i2c_finish(i2c, -ENXIO); 631 goto out; 632 } 633 i2c->expect_rxack = 0; 634 635 mpc_i2c_do_action(i2c); 636 637 out: 638 spin_unlock(&i2c->lock); 639 } 640 641 static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) 642 { 643 struct mpc_i2c *i2c = dev_id; 644 u8 status; 645 646 status = readb(i2c->base + MPC_I2C_SR); 647 if (status & CSR_MIF) { 648 /* Wait up to 100us for transfer to properly complete */ 649 readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100); 650 writeb(0, i2c->base + MPC_I2C_SR); 651 mpc_i2c_do_intr(i2c, status); 652 return IRQ_HANDLED; 653 } 654 return IRQ_NONE; 655 } 656 657 static int mpc_i2c_wait_for_completion(struct mpc_i2c *i2c) 658 { 659 long time_left; 660 661 time_left = wait_event_timeout(i2c->waitq, !i2c->block, i2c->adap.timeout); 662 if (!time_left) 663 return -ETIMEDOUT; 664 if (time_left < 0) 665 return time_left; 666 667 return 0; 668 } 669 670 static int mpc_i2c_execute_msg(struct mpc_i2c *i2c) 671 { 672 unsigned long orig_jiffies; 673 unsigned long flags; 674 int ret; 675 676 spin_lock_irqsave(&i2c->lock, flags); 677 678 i2c->curr_msg = 0; 679 i2c->rc = 0; 680 i2c->byte_posn = 0; 681 i2c->block = 1; 682 i2c->action = MPC_I2C_ACTION_START; 683 684 i2c->cntl_bits = CCR_MEN | CCR_MIEN; 685 writeb(0, i2c->base + MPC_I2C_SR); 686 writeccr(i2c, i2c->cntl_bits); 687 688 mpc_i2c_do_action(i2c); 689 690 spin_unlock_irqrestore(&i2c->lock, flags); 691 692 ret = mpc_i2c_wait_for_completion(i2c); 693 if (ret) 694 i2c->rc = ret; 695 696 if (i2c->rc == -EIO || i2c->rc == -EAGAIN || i2c->rc == -ETIMEDOUT) 697 i2c_recover_bus(&i2c->adap); 698 699 orig_jiffies = jiffies; 700 /* Wait until STOP is seen, allow up to 1 s */ 701 while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { 702 if (time_after(jiffies, orig_jiffies + HZ)) { 703 u8 status = readb(i2c->base + MPC_I2C_SR); 704 705 dev_dbg(i2c->dev, "timeout\n"); 706 if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { 707 writeb(status & ~CSR_MAL, 708 i2c->base + MPC_I2C_SR); 709 i2c_recover_bus(&i2c->adap); 710 } 711 return -EIO; 712 } 713 cond_resched(); 714 } 715 716 return i2c->rc; 717 } 718 719 static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) 720 { 721 int rc, ret = num; 722 struct mpc_i2c *i2c = i2c_get_adapdata(adap); 723 int i; 724 725 dev_dbg(i2c->dev, "num = %d\n", num); 726 for (i = 0; i < num; i++) 727 dev_dbg(i2c->dev, " addr = %02x, flags = %02x, len = %d, %*ph\n", 728 msgs[i].addr, msgs[i].flags, msgs[i].len, 729 msgs[i].flags & I2C_M_RD ? 0 : msgs[i].len, 730 msgs[i].buf); 731 732 WARN_ON(i2c->msgs != NULL); 733 i2c->msgs = msgs; 734 i2c->num_msgs = num; 735 736 rc = mpc_i2c_execute_msg(i2c); 737 if (rc < 0) 738 ret = rc; 739 740 i2c->num_msgs = 0; 741 i2c->msgs = NULL; 742 743 return ret; 744 } 745 746 static u32 mpc_functionality(struct i2c_adapter *adap) 747 { 748 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL 749 | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; 750 } 751 752 static int fsl_i2c_bus_recovery(struct i2c_adapter *adap) 753 { 754 struct mpc_i2c *i2c = i2c_get_adapdata(adap); 755 756 if (i2c->has_errata_A004447) 757 mpc_i2c_fixup_A004447(i2c); 758 else 759 mpc_i2c_fixup(i2c); 760 761 return 0; 762 } 763 764 static const struct i2c_algorithm mpc_algo = { 765 .master_xfer = mpc_xfer, 766 .functionality = mpc_functionality, 767 }; 768 769 static struct i2c_adapter mpc_ops = { 770 .owner = THIS_MODULE, 771 .algo = &mpc_algo, 772 }; 773 774 static struct i2c_bus_recovery_info fsl_i2c_recovery_info = { 775 .recover_bus = fsl_i2c_bus_recovery, 776 }; 777 778 static int fsl_i2c_probe(struct platform_device *op) 779 { 780 const struct mpc_i2c_data *data; 781 struct mpc_i2c *i2c; 782 struct clk *clk; 783 int result; 784 u32 clock; 785 int err; 786 787 i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL); 788 if (!i2c) 789 return -ENOMEM; 790 791 i2c->dev = &op->dev; /* for debug and error output */ 792 793 init_waitqueue_head(&i2c->waitq); 794 spin_lock_init(&i2c->lock); 795 796 i2c->base = devm_platform_ioremap_resource(op, 0); 797 if (IS_ERR(i2c->base)) 798 return PTR_ERR(i2c->base); 799 800 i2c->irq = platform_get_irq(op, 0); 801 if (i2c->irq < 0) 802 return i2c->irq; 803 804 result = devm_request_irq(&op->dev, i2c->irq, mpc_i2c_isr, 805 IRQF_SHARED, "i2c-mpc", i2c); 806 if (result < 0) { 807 dev_err(i2c->dev, "failed to attach interrupt\n"); 808 return result; 809 } 810 811 /* 812 * enable clock for the I2C peripheral (non fatal), 813 * keep a reference upon successful allocation 814 */ 815 clk = devm_clk_get_optional(&op->dev, NULL); 816 if (IS_ERR(clk)) 817 return PTR_ERR(clk); 818 819 err = clk_prepare_enable(clk); 820 if (err) { 821 dev_err(&op->dev, "failed to enable clock\n"); 822 return err; 823 } 824 825 i2c->clk_per = clk; 826 827 if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) { 828 clock = MPC_I2C_CLOCK_PRESERVE; 829 } else { 830 result = of_property_read_u32(op->dev.of_node, 831 "clock-frequency", &clock); 832 if (result) 833 clock = MPC_I2C_CLOCK_LEGACY; 834 } 835 836 data = device_get_match_data(&op->dev); 837 if (data) { 838 data->setup(op->dev.of_node, i2c, clock); 839 } else { 840 /* Backwards compatibility */ 841 if (of_property_read_bool(op->dev.of_node, "dfsrr")) 842 mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock); 843 } 844 845 /* Sadly, we have to support two deprecated bindings here */ 846 result = of_property_read_u32(op->dev.of_node, 847 "i2c-transfer-timeout-us", 848 &mpc_ops.timeout); 849 if (result == -EINVAL) 850 result = of_property_read_u32(op->dev.of_node, 851 "i2c-scl-clk-low-timeout-us", 852 &mpc_ops.timeout); 853 if (result == -EINVAL) 854 result = of_property_read_u32(op->dev.of_node, 855 "fsl,timeout", &mpc_ops.timeout); 856 857 if (!result) { 858 mpc_ops.timeout *= HZ / 1000000; 859 if (mpc_ops.timeout < 5) 860 mpc_ops.timeout = 5; 861 } else { 862 mpc_ops.timeout = HZ; 863 } 864 865 dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); 866 867 if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447")) 868 i2c->has_errata_A004447 = true; 869 870 i2c->adap = mpc_ops; 871 scnprintf(i2c->adap.name, sizeof(i2c->adap.name), 872 "MPC adapter (%s)", of_node_full_name(op->dev.of_node)); 873 i2c->adap.dev.parent = &op->dev; 874 i2c->adap.nr = op->id; 875 i2c->adap.dev.of_node = of_node_get(op->dev.of_node); 876 i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info; 877 platform_set_drvdata(op, i2c); 878 i2c_set_adapdata(&i2c->adap, i2c); 879 880 result = i2c_add_numbered_adapter(&i2c->adap); 881 if (result) 882 goto fail_add; 883 884 return 0; 885 886 fail_add: 887 clk_disable_unprepare(i2c->clk_per); 888 889 return result; 890 }; 891 892 static void fsl_i2c_remove(struct platform_device *op) 893 { 894 struct mpc_i2c *i2c = platform_get_drvdata(op); 895 896 i2c_del_adapter(&i2c->adap); 897 898 clk_disable_unprepare(i2c->clk_per); 899 }; 900 901 static int __maybe_unused mpc_i2c_suspend(struct device *dev) 902 { 903 struct mpc_i2c *i2c = dev_get_drvdata(dev); 904 905 i2c->fdr = readb(i2c->base + MPC_I2C_FDR); 906 i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR); 907 908 return 0; 909 } 910 911 static int __maybe_unused mpc_i2c_resume(struct device *dev) 912 { 913 struct mpc_i2c *i2c = dev_get_drvdata(dev); 914 915 writeb(i2c->fdr, i2c->base + MPC_I2C_FDR); 916 writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR); 917 918 return 0; 919 } 920 static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume); 921 922 static const struct mpc_i2c_data mpc_i2c_data_512x = { 923 .setup = mpc_i2c_setup_512x, 924 }; 925 926 static const struct mpc_i2c_data mpc_i2c_data_52xx = { 927 .setup = mpc_i2c_setup_52xx, 928 }; 929 930 static const struct mpc_i2c_data mpc_i2c_data_8313 = { 931 .setup = mpc_i2c_setup_8xxx, 932 }; 933 934 static const struct mpc_i2c_data mpc_i2c_data_8543 = { 935 .setup = mpc_i2c_setup_8xxx, 936 }; 937 938 static const struct mpc_i2c_data mpc_i2c_data_8544 = { 939 .setup = mpc_i2c_setup_8xxx, 940 }; 941 942 static const struct of_device_id mpc_i2c_of_match[] = { 943 {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, 944 {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, }, 945 {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, 946 {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, }, 947 {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, }, 948 {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, }, 949 {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, }, 950 /* Backward compatibility */ 951 {.compatible = "fsl-i2c", }, 952 {}, 953 }; 954 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); 955 956 /* Structure for a device driver */ 957 static struct platform_driver mpc_i2c_driver = { 958 .probe = fsl_i2c_probe, 959 .remove_new = fsl_i2c_remove, 960 .driver = { 961 .name = "mpc-i2c", 962 .of_match_table = mpc_i2c_of_match, 963 .pm = &mpc_i2c_pm_ops, 964 }, 965 }; 966 967 module_platform_driver(mpc_i2c_driver); 968 969 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); 970 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and " 971 "MPC824x/83xx/85xx/86xx/512x/52xx processors"); 972 MODULE_LICENSE("GPL"); 973