xref: /linux/drivers/i2c/busses/i2c-lpc2k.c (revision 95298d63c67673c654c08952672d016212b26054) 
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2011 NXP Semiconductors
4  *
5  * Code portions referenced from the i2x-pxa and i2c-pnx drivers
6  *
7  * Make SMBus byte and word transactions work on LPC178x/7x
8  * Copyright (c) 2012
9  * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
10  * Anton Protopopov, Emcraft Systems, antonp@emcraft.com
11  *
12  * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
13  */
14 
15 #include <linux/clk.h>
16 #include <linux/errno.h>
17 #include <linux/i2c.h>
18 #include <linux/interrupt.h>
19 #include <linux/io.h>
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/of.h>
23 #include <linux/of_device.h>
24 #include <linux/platform_device.h>
25 #include <linux/sched.h>
26 #include <linux/time.h>
27 
28 /* LPC24xx register offsets and bits */
29 #define LPC24XX_I2CONSET	0x00
30 #define LPC24XX_I2STAT		0x04
31 #define LPC24XX_I2DAT		0x08
32 #define LPC24XX_I2ADDR		0x0c
33 #define LPC24XX_I2SCLH		0x10
34 #define LPC24XX_I2SCLL		0x14
35 #define LPC24XX_I2CONCLR	0x18
36 
37 #define LPC24XX_AA		BIT(2)
38 #define LPC24XX_SI		BIT(3)
39 #define LPC24XX_STO		BIT(4)
40 #define LPC24XX_STA		BIT(5)
41 #define LPC24XX_I2EN		BIT(6)
42 
43 #define LPC24XX_STO_AA		(LPC24XX_STO | LPC24XX_AA)
44 #define LPC24XX_CLEAR_ALL	(LPC24XX_AA | LPC24XX_SI | LPC24XX_STO | \
45 				 LPC24XX_STA | LPC24XX_I2EN)
46 
47 /* I2C SCL clock has different duty cycle depending on mode */
48 #define I2C_STD_MODE_DUTY		46
49 #define I2C_FAST_MODE_DUTY		36
50 #define I2C_FAST_MODE_PLUS_DUTY		38
51 
52 /*
53  * 26 possible I2C status codes, but codes applicable only
54  * to master are listed here and used in this driver
55  */
56 enum {
57 	M_BUS_ERROR		= 0x00,
58 	M_START			= 0x08,
59 	M_REPSTART		= 0x10,
60 	MX_ADDR_W_ACK		= 0x18,
61 	MX_ADDR_W_NACK		= 0x20,
62 	MX_DATA_W_ACK		= 0x28,
63 	MX_DATA_W_NACK		= 0x30,
64 	M_DATA_ARB_LOST		= 0x38,
65 	MR_ADDR_R_ACK		= 0x40,
66 	MR_ADDR_R_NACK		= 0x48,
67 	MR_DATA_R_ACK		= 0x50,
68 	MR_DATA_R_NACK		= 0x58,
69 	M_I2C_IDLE		= 0xf8,
70 };
71 
72 struct lpc2k_i2c {
73 	void __iomem		*base;
74 	struct clk		*clk;
75 	int			irq;
76 	wait_queue_head_t	wait;
77 	struct i2c_adapter	adap;
78 	struct i2c_msg		*msg;
79 	int			msg_idx;
80 	int			msg_status;
81 	int			is_last;
82 };
83 
84 static void i2c_lpc2k_reset(struct lpc2k_i2c *i2c)
85 {
86 	/* Will force clear all statuses */
87 	writel(LPC24XX_CLEAR_ALL, i2c->base + LPC24XX_I2CONCLR);
88 	writel(0, i2c->base + LPC24XX_I2ADDR);
89 	writel(LPC24XX_I2EN, i2c->base + LPC24XX_I2CONSET);
90 }
91 
92 static int i2c_lpc2k_clear_arb(struct lpc2k_i2c *i2c)
93 {
94 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
95 
96 	/*
97 	 * If the transfer needs to abort for some reason, we'll try to
98 	 * force a stop condition to clear any pending bus conditions
99 	 */
100 	writel(LPC24XX_STO, i2c->base + LPC24XX_I2CONSET);
101 
102 	/* Wait for status change */
103 	while (readl(i2c->base + LPC24XX_I2STAT) != M_I2C_IDLE) {
104 		if (time_after(jiffies, timeout)) {
105 			/* Bus was not idle, try to reset adapter */
106 			i2c_lpc2k_reset(i2c);
107 			return -EBUSY;
108 		}
109 
110 		cpu_relax();
111 	}
112 
113 	return 0;
114 }
115 
116 static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
117 {
118 	unsigned char data;
119 	u32 status;
120 
121 	/*
122 	 * I2C in the LPC2xxx series is basically a state machine.
123 	 * Just run through the steps based on the current status.
124 	 */
125 	status = readl(i2c->base + LPC24XX_I2STAT);
126 
127 	switch (status) {
128 	case M_START:
129 	case M_REPSTART:
130 		/* Start bit was just sent out, send out addr and dir */
131 		data = i2c_8bit_addr_from_msg(i2c->msg);
132 
133 		writel(data, i2c->base + LPC24XX_I2DAT);
134 		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
135 		break;
136 
137 	case MX_ADDR_W_ACK:
138 	case MX_DATA_W_ACK:
139 		/*
140 		 * Address or data was sent out with an ACK. If there is more
141 		 * data to send, send it now
142 		 */
143 		if (i2c->msg_idx < i2c->msg->len) {
144 			writel(i2c->msg->buf[i2c->msg_idx],
145 			       i2c->base + LPC24XX_I2DAT);
146 		} else if (i2c->is_last) {
147 			/* Last message, send stop */
148 			writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
149 			writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
150 			i2c->msg_status = 0;
151 			disable_irq_nosync(i2c->irq);
152 		} else {
153 			i2c->msg_status = 0;
154 			disable_irq_nosync(i2c->irq);
155 		}
156 
157 		i2c->msg_idx++;
158 		break;
159 
160 	case MR_ADDR_R_ACK:
161 		/* Receive first byte from slave */
162 		if (i2c->msg->len == 1) {
163 			/* Last byte, return NACK */
164 			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
165 		} else {
166 			/* Not last byte, return ACK */
167 			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
168 		}
169 
170 		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
171 		break;
172 
173 	case MR_DATA_R_NACK:
174 		/*
175 		 * The I2C shows NACK status on reads, so we need to accept
176 		 * the NACK as an ACK here. This should be ok, as the real
177 		 * BACK would of been caught on the address write.
178 		 */
179 	case MR_DATA_R_ACK:
180 		/* Data was received */
181 		if (i2c->msg_idx < i2c->msg->len) {
182 			i2c->msg->buf[i2c->msg_idx] =
183 					readl(i2c->base + LPC24XX_I2DAT);
184 		}
185 
186 		/* If transfer is done, send STOP */
187 		if (i2c->msg_idx >= i2c->msg->len - 1 && i2c->is_last) {
188 			writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
189 			writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
190 			i2c->msg_status = 0;
191 		}
192 
193 		/* Message is done */
194 		if (i2c->msg_idx >= i2c->msg->len - 1) {
195 			i2c->msg_status = 0;
196 			disable_irq_nosync(i2c->irq);
197 		}
198 
199 		/*
200 		 * One pre-last data input, send NACK to tell the slave that
201 		 * this is going to be the last data byte to be transferred.
202 		 */
203 		if (i2c->msg_idx >= i2c->msg->len - 2) {
204 			/* One byte left to receive - NACK */
205 			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
206 		} else {
207 			/* More than one byte left to receive - ACK */
208 			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
209 		}
210 
211 		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
212 		i2c->msg_idx++;
213 		break;
214 
215 	case MX_ADDR_W_NACK:
216 	case MX_DATA_W_NACK:
217 	case MR_ADDR_R_NACK:
218 		/* NACK processing is done */
219 		writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
220 		i2c->msg_status = -ENXIO;
221 		disable_irq_nosync(i2c->irq);
222 		break;
223 
224 	case M_DATA_ARB_LOST:
225 		/* Arbitration lost */
226 		i2c->msg_status = -EAGAIN;
227 
228 		/* Release the I2C bus */
229 		writel(LPC24XX_STA | LPC24XX_STO, i2c->base + LPC24XX_I2CONCLR);
230 		disable_irq_nosync(i2c->irq);
231 		break;
232 
233 	default:
234 		/* Unexpected statuses */
235 		i2c->msg_status = -EIO;
236 		disable_irq_nosync(i2c->irq);
237 		break;
238 	}
239 
240 	/* Exit on failure or all bytes transferred */
241 	if (i2c->msg_status != -EBUSY)
242 		wake_up(&i2c->wait);
243 
244 	/*
245 	 * If `msg_status` is zero, then `lpc2k_process_msg()`
246 	 * is responsible for clearing the SI flag.
247 	 */
248 	if (i2c->msg_status != 0)
249 		writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
250 }
251 
252 static int lpc2k_process_msg(struct lpc2k_i2c *i2c, int msgidx)
253 {
254 	/* A new transfer is kicked off by initiating a start condition */
255 	if (!msgidx) {
256 		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
257 	} else {
258 		/*
259 		 * A multi-message I2C transfer continues where the
260 		 * previous I2C transfer left off and uses the
261 		 * current condition of the I2C adapter.
262 		 */
263 		if (unlikely(i2c->msg->flags & I2C_M_NOSTART)) {
264 			WARN_ON(i2c->msg->len == 0);
265 
266 			if (!(i2c->msg->flags & I2C_M_RD)) {
267 				/* Start transmit of data */
268 				writel(i2c->msg->buf[0],
269 				       i2c->base + LPC24XX_I2DAT);
270 				i2c->msg_idx++;
271 			}
272 		} else {
273 			/* Start or repeated start */
274 			writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
275 		}
276 
277 		writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
278 	}
279 
280 	enable_irq(i2c->irq);
281 
282 	/* Wait for transfer completion */
283 	if (wait_event_timeout(i2c->wait, i2c->msg_status != -EBUSY,
284 			       msecs_to_jiffies(1000)) == 0) {
285 		disable_irq_nosync(i2c->irq);
286 
287 		return -ETIMEDOUT;
288 	}
289 
290 	return i2c->msg_status;
291 }
292 
293 static int i2c_lpc2k_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
294 			  int msg_num)
295 {
296 	struct lpc2k_i2c *i2c = i2c_get_adapdata(adap);
297 	int ret, i;
298 	u32 stat;
299 
300 	/* Check for bus idle condition */
301 	stat = readl(i2c->base + LPC24XX_I2STAT);
302 	if (stat != M_I2C_IDLE) {
303 		/* Something is holding the bus, try to clear it */
304 		return i2c_lpc2k_clear_arb(i2c);
305 	}
306 
307 	/* Process a single message at a time */
308 	for (i = 0; i < msg_num; i++) {
309 		/* Save message pointer and current message data index */
310 		i2c->msg = &msgs[i];
311 		i2c->msg_idx = 0;
312 		i2c->msg_status = -EBUSY;
313 		i2c->is_last = (i == (msg_num - 1));
314 
315 		ret = lpc2k_process_msg(i2c, i);
316 		if (ret)
317 			return ret;
318 	}
319 
320 	return msg_num;
321 }
322 
323 static irqreturn_t i2c_lpc2k_handler(int irq, void *dev_id)
324 {
325 	struct lpc2k_i2c *i2c = dev_id;
326 
327 	if (readl(i2c->base + LPC24XX_I2CONSET) & LPC24XX_SI) {
328 		i2c_lpc2k_pump_msg(i2c);
329 		return IRQ_HANDLED;
330 	}
331 
332 	return IRQ_NONE;
333 }
334 
335 static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap)
336 {
337 	/* Only emulated SMBus for now */
338 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
339 }
340 
341 static const struct i2c_algorithm i2c_lpc2k_algorithm = {
342 	.master_xfer	= i2c_lpc2k_xfer,
343 	.functionality	= i2c_lpc2k_functionality,
344 };
345 
346 static int i2c_lpc2k_probe(struct platform_device *pdev)
347 {
348 	struct lpc2k_i2c *i2c;
349 	u32 bus_clk_rate;
350 	u32 scl_high;
351 	u32 clkrate;
352 	int ret;
353 
354 	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
355 	if (!i2c)
356 		return -ENOMEM;
357 
358 	i2c->base = devm_platform_ioremap_resource(pdev, 0);
359 	if (IS_ERR(i2c->base))
360 		return PTR_ERR(i2c->base);
361 
362 	i2c->irq = platform_get_irq(pdev, 0);
363 	if (i2c->irq < 0)
364 		return i2c->irq;
365 
366 	init_waitqueue_head(&i2c->wait);
367 
368 	i2c->clk = devm_clk_get(&pdev->dev, NULL);
369 	if (IS_ERR(i2c->clk)) {
370 		dev_err(&pdev->dev, "error getting clock\n");
371 		return PTR_ERR(i2c->clk);
372 	}
373 
374 	ret = clk_prepare_enable(i2c->clk);
375 	if (ret) {
376 		dev_err(&pdev->dev, "unable to enable clock.\n");
377 		return ret;
378 	}
379 
380 	ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0,
381 			       dev_name(&pdev->dev), i2c);
382 	if (ret < 0) {
383 		dev_err(&pdev->dev, "can't request interrupt.\n");
384 		goto fail_clk;
385 	}
386 
387 	disable_irq_nosync(i2c->irq);
388 
389 	/* Place controller is a known state */
390 	i2c_lpc2k_reset(i2c);
391 
392 	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
393 				   &bus_clk_rate);
394 	if (ret)
395 		bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
396 
397 	clkrate = clk_get_rate(i2c->clk);
398 	if (clkrate == 0) {
399 		dev_err(&pdev->dev, "can't get I2C base clock\n");
400 		ret = -EINVAL;
401 		goto fail_clk;
402 	}
403 
404 	/* Setup I2C dividers to generate clock with proper duty cycle */
405 	clkrate = clkrate / bus_clk_rate;
406 	if (bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ)
407 		scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
408 	else if (bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
409 		scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
410 	else
411 		scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;
412 
413 	writel(scl_high, i2c->base + LPC24XX_I2SCLH);
414 	writel(clkrate - scl_high, i2c->base + LPC24XX_I2SCLL);
415 
416 	platform_set_drvdata(pdev, i2c);
417 
418 	i2c_set_adapdata(&i2c->adap, i2c);
419 	i2c->adap.owner = THIS_MODULE;
420 	strlcpy(i2c->adap.name, "LPC2K I2C adapter", sizeof(i2c->adap.name));
421 	i2c->adap.algo = &i2c_lpc2k_algorithm;
422 	i2c->adap.dev.parent = &pdev->dev;
423 	i2c->adap.dev.of_node = pdev->dev.of_node;
424 
425 	ret = i2c_add_adapter(&i2c->adap);
426 	if (ret < 0)
427 		goto fail_clk;
428 
429 	dev_info(&pdev->dev, "LPC2K I2C adapter\n");
430 
431 	return 0;
432 
433 fail_clk:
434 	clk_disable_unprepare(i2c->clk);
435 	return ret;
436 }
437 
438 static int i2c_lpc2k_remove(struct platform_device *dev)
439 {
440 	struct lpc2k_i2c *i2c = platform_get_drvdata(dev);
441 
442 	i2c_del_adapter(&i2c->adap);
443 	clk_disable_unprepare(i2c->clk);
444 
445 	return 0;
446 }
447 
448 #ifdef CONFIG_PM
449 static int i2c_lpc2k_suspend(struct device *dev)
450 {
451 	struct lpc2k_i2c *i2c = dev_get_drvdata(dev);
452 
453 	clk_disable(i2c->clk);
454 
455 	return 0;
456 }
457 
458 static int i2c_lpc2k_resume(struct device *dev)
459 {
460 	struct lpc2k_i2c *i2c = dev_get_drvdata(dev);
461 
462 	clk_enable(i2c->clk);
463 	i2c_lpc2k_reset(i2c);
464 
465 	return 0;
466 }
467 
468 static const struct dev_pm_ops i2c_lpc2k_dev_pm_ops = {
469 	.suspend_noirq = i2c_lpc2k_suspend,
470 	.resume_noirq = i2c_lpc2k_resume,
471 };
472 
473 #define I2C_LPC2K_DEV_PM_OPS (&i2c_lpc2k_dev_pm_ops)
474 #else
475 #define I2C_LPC2K_DEV_PM_OPS NULL
476 #endif
477 
478 static const struct of_device_id lpc2k_i2c_match[] = {
479 	{ .compatible = "nxp,lpc1788-i2c" },
480 	{},
481 };
482 MODULE_DEVICE_TABLE(of, lpc2k_i2c_match);
483 
484 static struct platform_driver i2c_lpc2k_driver = {
485 	.probe	= i2c_lpc2k_probe,
486 	.remove	= i2c_lpc2k_remove,
487 	.driver	= {
488 		.name		= "lpc2k-i2c",
489 		.pm		= I2C_LPC2K_DEV_PM_OPS,
490 		.of_match_table	= lpc2k_i2c_match,
491 	},
492 };
493 module_platform_driver(i2c_lpc2k_driver);
494 
495 MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
496 MODULE_DESCRIPTION("I2C driver for LPC2xxx devices");
497 MODULE_LICENSE("GPL");
498 MODULE_ALIAS("platform:lpc2k-i2c");
499