1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * I2C bus driver for Kontron COM modules 4 * 5 * Copyright (c) 2010-2013 Kontron Europe GmbH 6 * Author: Michael Brunner <michael.brunner@kontron.com> 7 * 8 * The driver is based on the i2c-ocores driver by Peter Korsgaard. 9 */ 10 11 #include <linux/module.h> 12 #include <linux/platform_device.h> 13 #include <linux/i2c.h> 14 #include <linux/delay.h> 15 #include <linux/mfd/kempld.h> 16 17 #define KEMPLD_I2C_PRELOW 0x0b 18 #define KEMPLD_I2C_PREHIGH 0x0c 19 #define KEMPLD_I2C_DATA 0x0e 20 21 #define KEMPLD_I2C_CTRL 0x0d 22 #define I2C_CTRL_IEN 0x40 23 #define I2C_CTRL_EN 0x80 24 25 #define KEMPLD_I2C_STAT 0x0f 26 #define I2C_STAT_IF 0x01 27 #define I2C_STAT_TIP 0x02 28 #define I2C_STAT_ARBLOST 0x20 29 #define I2C_STAT_BUSY 0x40 30 #define I2C_STAT_NACK 0x80 31 32 #define KEMPLD_I2C_CMD 0x0f 33 #define I2C_CMD_START 0x91 34 #define I2C_CMD_STOP 0x41 35 #define I2C_CMD_READ 0x21 36 #define I2C_CMD_WRITE 0x11 37 #define I2C_CMD_READ_ACK 0x21 38 #define I2C_CMD_READ_NACK 0x29 39 #define I2C_CMD_IACK 0x01 40 41 #define KEMPLD_I2C_FREQ_MAX 2700 /* 2.7 mHz */ 42 #define KEMPLD_I2C_FREQ_STD 100 /* 100 kHz */ 43 44 enum { 45 STATE_DONE = 0, 46 STATE_INIT, 47 STATE_ADDR, 48 STATE_ADDR10, 49 STATE_START, 50 STATE_WRITE, 51 STATE_READ, 52 STATE_ERROR, 53 }; 54 55 struct kempld_i2c_data { 56 struct device *dev; 57 struct kempld_device_data *pld; 58 struct i2c_adapter adap; 59 struct i2c_msg *msg; 60 int pos; 61 int nmsgs; 62 int state; 63 bool was_active; 64 }; 65 66 static unsigned int bus_frequency = KEMPLD_I2C_FREQ_STD; 67 module_param(bus_frequency, uint, 0); 68 MODULE_PARM_DESC(bus_frequency, "Set I2C bus frequency in kHz (default=" 69 __MODULE_STRING(KEMPLD_I2C_FREQ_STD)")"); 70 71 static int i2c_bus = -1; 72 module_param(i2c_bus, int, 0); 73 MODULE_PARM_DESC(i2c_bus, "Set I2C bus number (default=-1 for dynamic assignment)"); 74 75 static bool i2c_gpio_mux; 76 module_param(i2c_gpio_mux, bool, 0); 77 MODULE_PARM_DESC(i2c_gpio_mux, "Enable I2C port on GPIO out (default=false)"); 78 79 /* 80 * kempld_get_mutex must be called prior to calling this function. 81 */ 82 static int kempld_i2c_process(struct kempld_i2c_data *i2c) 83 { 84 struct kempld_device_data *pld = i2c->pld; 85 u8 stat = kempld_read8(pld, KEMPLD_I2C_STAT); 86 struct i2c_msg *msg = i2c->msg; 87 u8 addr; 88 89 /* Ready? */ 90 if (stat & I2C_STAT_TIP) 91 return -EBUSY; 92 93 if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) { 94 /* Stop has been sent */ 95 kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK); 96 if (i2c->state == STATE_ERROR) 97 return -EIO; 98 return 0; 99 } 100 101 /* Error? */ 102 if (stat & I2C_STAT_ARBLOST) { 103 i2c->state = STATE_ERROR; 104 kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP); 105 return -EAGAIN; 106 } 107 108 if (i2c->state == STATE_INIT) { 109 if (stat & I2C_STAT_BUSY) 110 return -EBUSY; 111 112 i2c->state = STATE_ADDR; 113 } 114 115 if (i2c->state == STATE_ADDR) { 116 /* 10 bit address? */ 117 if (i2c->msg->flags & I2C_M_TEN) { 118 addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6); 119 /* Set read bit if necessary */ 120 addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0; 121 i2c->state = STATE_ADDR10; 122 } else { 123 addr = i2c_8bit_addr_from_msg(i2c->msg); 124 i2c->state = STATE_START; 125 } 126 127 kempld_write8(pld, KEMPLD_I2C_DATA, addr); 128 kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START); 129 130 return 0; 131 } 132 133 /* Second part of 10 bit addressing */ 134 if (i2c->state == STATE_ADDR10) { 135 kempld_write8(pld, KEMPLD_I2C_DATA, i2c->msg->addr & 0xff); 136 kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE); 137 138 i2c->state = STATE_START; 139 return 0; 140 } 141 142 if (i2c->state == STATE_START || i2c->state == STATE_WRITE) { 143 i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE; 144 145 if (stat & I2C_STAT_NACK) { 146 i2c->state = STATE_ERROR; 147 kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP); 148 return -ENXIO; 149 } 150 } else { 151 msg->buf[i2c->pos++] = kempld_read8(pld, KEMPLD_I2C_DATA); 152 } 153 154 if (i2c->pos >= msg->len) { 155 i2c->nmsgs--; 156 i2c->msg++; 157 i2c->pos = 0; 158 msg = i2c->msg; 159 160 if (i2c->nmsgs) { 161 if (!(msg->flags & I2C_M_NOSTART)) { 162 i2c->state = STATE_ADDR; 163 return 0; 164 } else { 165 i2c->state = (msg->flags & I2C_M_RD) 166 ? STATE_READ : STATE_WRITE; 167 } 168 } else { 169 i2c->state = STATE_DONE; 170 kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP); 171 return 0; 172 } 173 } 174 175 if (i2c->state == STATE_READ) { 176 kempld_write8(pld, KEMPLD_I2C_CMD, i2c->pos == (msg->len - 1) ? 177 I2C_CMD_READ_NACK : I2C_CMD_READ_ACK); 178 } else { 179 kempld_write8(pld, KEMPLD_I2C_DATA, msg->buf[i2c->pos++]); 180 kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE); 181 } 182 183 return 0; 184 } 185 186 static int kempld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, 187 int num) 188 { 189 struct kempld_i2c_data *i2c = i2c_get_adapdata(adap); 190 struct kempld_device_data *pld = i2c->pld; 191 unsigned long timeout = jiffies + HZ; 192 int ret; 193 194 i2c->msg = msgs; 195 i2c->pos = 0; 196 i2c->nmsgs = num; 197 i2c->state = STATE_INIT; 198 199 /* Handle the transfer */ 200 while (time_before(jiffies, timeout)) { 201 kempld_get_mutex(pld); 202 ret = kempld_i2c_process(i2c); 203 kempld_release_mutex(pld); 204 205 if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) 206 return (i2c->state == STATE_DONE) ? num : ret; 207 208 if (ret == 0) 209 timeout = jiffies + HZ; 210 211 usleep_range(5, 15); 212 } 213 214 i2c->state = STATE_ERROR; 215 216 return -ETIMEDOUT; 217 } 218 219 /* 220 * kempld_get_mutex must be called prior to calling this function. 221 */ 222 static void kempld_i2c_device_init(struct kempld_i2c_data *i2c) 223 { 224 struct kempld_device_data *pld = i2c->pld; 225 u16 prescale_corr; 226 long prescale; 227 u8 ctrl; 228 u8 stat; 229 u8 cfg; 230 231 /* Make sure the device is disabled */ 232 ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL); 233 ctrl &= ~(I2C_CTRL_EN | I2C_CTRL_IEN); 234 kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl); 235 236 if (bus_frequency > KEMPLD_I2C_FREQ_MAX) 237 bus_frequency = KEMPLD_I2C_FREQ_MAX; 238 239 if (pld->info.spec_major == 1) 240 prescale = pld->pld_clock / (bus_frequency * 5) - 1000; 241 else 242 prescale = pld->pld_clock / (bus_frequency * 4) - 3000; 243 244 if (prescale < 0) 245 prescale = 0; 246 247 /* Round to the best matching value */ 248 prescale_corr = prescale / 1000; 249 if (prescale % 1000 >= 500) 250 prescale_corr++; 251 252 kempld_write8(pld, KEMPLD_I2C_PRELOW, prescale_corr & 0xff); 253 kempld_write8(pld, KEMPLD_I2C_PREHIGH, prescale_corr >> 8); 254 255 /* Activate I2C bus output on GPIO pins */ 256 cfg = kempld_read8(pld, KEMPLD_CFG); 257 if (i2c_gpio_mux) 258 cfg |= KEMPLD_CFG_GPIO_I2C_MUX; 259 else 260 cfg &= ~KEMPLD_CFG_GPIO_I2C_MUX; 261 kempld_write8(pld, KEMPLD_CFG, cfg); 262 263 /* Enable the device */ 264 kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK); 265 ctrl |= I2C_CTRL_EN; 266 kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl); 267 268 stat = kempld_read8(pld, KEMPLD_I2C_STAT); 269 if (stat & I2C_STAT_BUSY) 270 kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP); 271 } 272 273 static u32 kempld_i2c_func(struct i2c_adapter *adap) 274 { 275 return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL; 276 } 277 278 static const struct i2c_algorithm kempld_i2c_algorithm = { 279 .master_xfer = kempld_i2c_xfer, 280 .functionality = kempld_i2c_func, 281 }; 282 283 static const struct i2c_adapter kempld_i2c_adapter = { 284 .owner = THIS_MODULE, 285 .name = "i2c-kempld", 286 .class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED, 287 .algo = &kempld_i2c_algorithm, 288 }; 289 290 static int kempld_i2c_probe(struct platform_device *pdev) 291 { 292 struct kempld_device_data *pld = dev_get_drvdata(pdev->dev.parent); 293 struct kempld_i2c_data *i2c; 294 int ret; 295 u8 ctrl; 296 297 i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); 298 if (!i2c) 299 return -ENOMEM; 300 301 i2c->pld = pld; 302 i2c->dev = &pdev->dev; 303 i2c->adap = kempld_i2c_adapter; 304 i2c->adap.dev.parent = i2c->dev; 305 ACPI_COMPANION_SET(&i2c->adap.dev, ACPI_COMPANION(&pdev->dev)); 306 i2c_set_adapdata(&i2c->adap, i2c); 307 platform_set_drvdata(pdev, i2c); 308 309 kempld_get_mutex(pld); 310 ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL); 311 312 if (ctrl & I2C_CTRL_EN) 313 i2c->was_active = true; 314 315 kempld_i2c_device_init(i2c); 316 kempld_release_mutex(pld); 317 318 /* Add I2C adapter to I2C tree */ 319 if (i2c_bus >= -1) 320 i2c->adap.nr = i2c_bus; 321 ret = i2c_add_numbered_adapter(&i2c->adap); 322 if (ret) 323 return ret; 324 325 dev_info(i2c->dev, "I2C bus initialized at %dkHz\n", 326 bus_frequency); 327 328 return 0; 329 } 330 331 static void kempld_i2c_remove(struct platform_device *pdev) 332 { 333 struct kempld_i2c_data *i2c = platform_get_drvdata(pdev); 334 struct kempld_device_data *pld = i2c->pld; 335 u8 ctrl; 336 337 kempld_get_mutex(pld); 338 /* 339 * Disable I2C logic if it was not activated before the 340 * driver loaded 341 */ 342 if (!i2c->was_active) { 343 ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL); 344 ctrl &= ~I2C_CTRL_EN; 345 kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl); 346 } 347 kempld_release_mutex(pld); 348 349 i2c_del_adapter(&i2c->adap); 350 } 351 352 static int kempld_i2c_suspend(struct device *dev) 353 { 354 struct kempld_i2c_data *i2c = dev_get_drvdata(dev); 355 struct kempld_device_data *pld = i2c->pld; 356 u8 ctrl; 357 358 kempld_get_mutex(pld); 359 ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL); 360 ctrl &= ~I2C_CTRL_EN; 361 kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl); 362 kempld_release_mutex(pld); 363 364 return 0; 365 } 366 367 static int kempld_i2c_resume(struct device *dev) 368 { 369 struct kempld_i2c_data *i2c = dev_get_drvdata(dev); 370 struct kempld_device_data *pld = i2c->pld; 371 372 kempld_get_mutex(pld); 373 kempld_i2c_device_init(i2c); 374 kempld_release_mutex(pld); 375 376 return 0; 377 } 378 379 static DEFINE_SIMPLE_DEV_PM_OPS(kempld_i2c_pm_ops, 380 kempld_i2c_suspend, kempld_i2c_resume); 381 382 static struct platform_driver kempld_i2c_driver = { 383 .driver = { 384 .name = "kempld-i2c", 385 .pm = pm_sleep_ptr(&kempld_i2c_pm_ops), 386 }, 387 .probe = kempld_i2c_probe, 388 .remove_new = kempld_i2c_remove, 389 }; 390 391 module_platform_driver(kempld_i2c_driver); 392 393 MODULE_DESCRIPTION("KEM PLD I2C Driver"); 394 MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>"); 395 MODULE_LICENSE("GPL"); 396 MODULE_ALIAS("platform:kempld_i2c"); 397