1 /* 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * Copyright(c) 2012 Intel Corporation. All rights reserved. 6 * 7 * GPL LICENSE SUMMARY 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * The full GNU General Public License is included in this distribution 18 * in the file called LICENSE.GPL. 19 * 20 * BSD LICENSE 21 * 22 * Redistribution and use in source and binary forms, with or without 23 * modification, are permitted provided that the following conditions 24 * are met: 25 * 26 * * Redistributions of source code must retain the above copyright 27 * notice, this list of conditions and the following disclaimer. 28 * * Redistributions in binary form must reproduce the above copyright 29 * notice, this list of conditions and the following disclaimer in 30 * the documentation and/or other materials provided with the 31 * distribution. 32 * * Neither the name of Intel Corporation nor the names of its 33 * contributors may be used to endorse or promote products derived 34 * from this software without specific prior written permission. 35 * 36 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 37 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 38 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 39 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 40 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 41 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 42 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 43 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 44 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 45 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 46 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 47 */ 48 49 /* 50 * Supports the SMBus Message Transport (SMT) in the Intel Atom Processor 51 * S12xx Product Family. 52 * 53 * Features supported by this driver: 54 * Hardware PEC yes 55 * Block buffer yes 56 * Block process call transaction no 57 * Slave mode no 58 */ 59 60 #include <linux/module.h> 61 #include <linux/pci.h> 62 #include <linux/kernel.h> 63 #include <linux/stddef.h> 64 #include <linux/completion.h> 65 #include <linux/dma-mapping.h> 66 #include <linux/i2c.h> 67 #include <linux/acpi.h> 68 #include <linux/interrupt.h> 69 70 #include <linux/io-64-nonatomic-lo-hi.h> 71 72 /* PCI Address Constants */ 73 #define SMBBAR 0 74 75 /* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */ 76 #define PCI_DEVICE_ID_INTEL_S1200_SMT0 0x0c59 77 #define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a 78 #define PCI_DEVICE_ID_INTEL_DNV_SMT 0x19ac 79 #define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15 80 81 #define ISMT_DESC_ENTRIES 2 /* number of descriptor entries */ 82 #define ISMT_MAX_RETRIES 3 /* number of SMBus retries to attempt */ 83 84 /* Hardware Descriptor Constants - Control Field */ 85 #define ISMT_DESC_CWRL 0x01 /* Command/Write Length */ 86 #define ISMT_DESC_BLK 0X04 /* Perform Block Transaction */ 87 #define ISMT_DESC_FAIR 0x08 /* Set fairness flag upon successful arbit. */ 88 #define ISMT_DESC_PEC 0x10 /* Packet Error Code */ 89 #define ISMT_DESC_I2C 0x20 /* I2C Enable */ 90 #define ISMT_DESC_INT 0x40 /* Interrupt */ 91 #define ISMT_DESC_SOE 0x80 /* Stop On Error */ 92 93 /* Hardware Descriptor Constants - Status Field */ 94 #define ISMT_DESC_SCS 0x01 /* Success */ 95 #define ISMT_DESC_DLTO 0x04 /* Data Low Time Out */ 96 #define ISMT_DESC_NAK 0x08 /* NAK Received */ 97 #define ISMT_DESC_CRC 0x10 /* CRC Error */ 98 #define ISMT_DESC_CLTO 0x20 /* Clock Low Time Out */ 99 #define ISMT_DESC_COL 0x40 /* Collisions */ 100 #define ISMT_DESC_LPR 0x80 /* Large Packet Received */ 101 102 /* Macros */ 103 #define ISMT_DESC_ADDR_RW(addr, rw) (((addr) << 1) | (rw)) 104 105 /* iSMT General Register address offsets (SMBBAR + <addr>) */ 106 #define ISMT_GR_GCTRL 0x000 /* General Control */ 107 #define ISMT_GR_SMTICL 0x008 /* SMT Interrupt Cause Location */ 108 #define ISMT_GR_ERRINTMSK 0x010 /* Error Interrupt Mask */ 109 #define ISMT_GR_ERRAERMSK 0x014 /* Error AER Mask */ 110 #define ISMT_GR_ERRSTS 0x018 /* Error Status */ 111 #define ISMT_GR_ERRINFO 0x01c /* Error Information */ 112 113 /* iSMT Master Registers */ 114 #define ISMT_MSTR_MDBA 0x100 /* Master Descriptor Base Address */ 115 #define ISMT_MSTR_MCTRL 0x108 /* Master Control */ 116 #define ISMT_MSTR_MSTS 0x10c /* Master Status */ 117 #define ISMT_MSTR_MDS 0x110 /* Master Descriptor Size */ 118 #define ISMT_MSTR_RPOLICY 0x114 /* Retry Policy */ 119 120 /* iSMT Miscellaneous Registers */ 121 #define ISMT_SPGT 0x300 /* SMBus PHY Global Timing */ 122 123 /* General Control Register (GCTRL) bit definitions */ 124 #define ISMT_GCTRL_TRST 0x04 /* Target Reset */ 125 #define ISMT_GCTRL_KILL 0x08 /* Kill */ 126 #define ISMT_GCTRL_SRST 0x40 /* Soft Reset */ 127 128 /* Master Control Register (MCTRL) bit definitions */ 129 #define ISMT_MCTRL_SS 0x01 /* Start/Stop */ 130 #define ISMT_MCTRL_MEIE 0x10 /* Master Error Interrupt Enable */ 131 #define ISMT_MCTRL_FMHP 0x00ff0000 /* Firmware Master Head Ptr (FMHP) */ 132 133 /* Master Status Register (MSTS) bit definitions */ 134 #define ISMT_MSTS_HMTP 0xff0000 /* HW Master Tail Pointer (HMTP) */ 135 #define ISMT_MSTS_MIS 0x20 /* Master Interrupt Status (MIS) */ 136 #define ISMT_MSTS_MEIS 0x10 /* Master Error Int Status (MEIS) */ 137 #define ISMT_MSTS_IP 0x01 /* In Progress */ 138 139 /* Master Descriptor Size (MDS) bit definitions */ 140 #define ISMT_MDS_MASK 0xff /* Master Descriptor Size mask (MDS) */ 141 142 /* SMBus PHY Global Timing Register (SPGT) bit definitions */ 143 #define ISMT_SPGT_SPD_MASK 0xc0000000 /* SMBus Speed mask */ 144 #define ISMT_SPGT_SPD_80K 0x00 /* 80 kHz */ 145 #define ISMT_SPGT_SPD_100K (0x1 << 30) /* 100 kHz */ 146 #define ISMT_SPGT_SPD_400K (0x2 << 30) /* 400 kHz */ 147 #define ISMT_SPGT_SPD_1M (0x3 << 30) /* 1 MHz */ 148 149 150 /* MSI Control Register (MSICTL) bit definitions */ 151 #define ISMT_MSICTL_MSIE 0x01 /* MSI Enable */ 152 153 /* iSMT Hardware Descriptor */ 154 struct ismt_desc { 155 u8 tgtaddr_rw; /* target address & r/w bit */ 156 u8 wr_len_cmd; /* write length in bytes or a command */ 157 u8 rd_len; /* read length */ 158 u8 control; /* control bits */ 159 u8 status; /* status bits */ 160 u8 retry; /* collision retry and retry count */ 161 u8 rxbytes; /* received bytes */ 162 u8 txbytes; /* transmitted bytes */ 163 u32 dptr_low; /* lower 32 bit of the data pointer */ 164 u32 dptr_high; /* upper 32 bit of the data pointer */ 165 } __packed; 166 167 struct ismt_priv { 168 struct i2c_adapter adapter; 169 void __iomem *smba; /* PCI BAR */ 170 struct pci_dev *pci_dev; 171 struct ismt_desc *hw; /* descriptor virt base addr */ 172 dma_addr_t io_rng_dma; /* descriptor HW base addr */ 173 u8 head; /* ring buffer head pointer */ 174 struct completion cmp; /* interrupt completion */ 175 u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* temp R/W data buffer */ 176 }; 177 178 /** 179 * ismt_ids - PCI device IDs supported by this driver 180 */ 181 static const struct pci_device_id ismt_ids[] = { 182 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) }, 183 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) }, 184 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) }, 185 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) }, 186 { 0, } 187 }; 188 189 MODULE_DEVICE_TABLE(pci, ismt_ids); 190 191 /* Bus speed control bits for slow debuggers - refer to the docs for usage */ 192 static unsigned int bus_speed; 193 module_param(bus_speed, uint, S_IRUGO); 194 MODULE_PARM_DESC(bus_speed, "Bus Speed in kHz (0 = BIOS default)"); 195 196 /** 197 * __ismt_desc_dump() - dump the contents of a specific descriptor 198 */ 199 static void __ismt_desc_dump(struct device *dev, const struct ismt_desc *desc) 200 { 201 202 dev_dbg(dev, "Descriptor struct: %p\n", desc); 203 dev_dbg(dev, "\ttgtaddr_rw=0x%02X\n", desc->tgtaddr_rw); 204 dev_dbg(dev, "\twr_len_cmd=0x%02X\n", desc->wr_len_cmd); 205 dev_dbg(dev, "\trd_len= 0x%02X\n", desc->rd_len); 206 dev_dbg(dev, "\tcontrol= 0x%02X\n", desc->control); 207 dev_dbg(dev, "\tstatus= 0x%02X\n", desc->status); 208 dev_dbg(dev, "\tretry= 0x%02X\n", desc->retry); 209 dev_dbg(dev, "\trxbytes= 0x%02X\n", desc->rxbytes); 210 dev_dbg(dev, "\ttxbytes= 0x%02X\n", desc->txbytes); 211 dev_dbg(dev, "\tdptr_low= 0x%08X\n", desc->dptr_low); 212 dev_dbg(dev, "\tdptr_high= 0x%08X\n", desc->dptr_high); 213 } 214 /** 215 * ismt_desc_dump() - dump the contents of a descriptor for debug purposes 216 * @priv: iSMT private data 217 */ 218 static void ismt_desc_dump(struct ismt_priv *priv) 219 { 220 struct device *dev = &priv->pci_dev->dev; 221 struct ismt_desc *desc = &priv->hw[priv->head]; 222 223 dev_dbg(dev, "Dump of the descriptor struct: 0x%X\n", priv->head); 224 __ismt_desc_dump(dev, desc); 225 } 226 227 /** 228 * ismt_gen_reg_dump() - dump the iSMT General Registers 229 * @priv: iSMT private data 230 */ 231 static void ismt_gen_reg_dump(struct ismt_priv *priv) 232 { 233 struct device *dev = &priv->pci_dev->dev; 234 235 dev_dbg(dev, "Dump of the iSMT General Registers\n"); 236 dev_dbg(dev, " GCTRL.... : (0x%p)=0x%X\n", 237 priv->smba + ISMT_GR_GCTRL, 238 readl(priv->smba + ISMT_GR_GCTRL)); 239 dev_dbg(dev, " SMTICL... : (0x%p)=0x%016llX\n", 240 priv->smba + ISMT_GR_SMTICL, 241 (long long unsigned int)readq(priv->smba + ISMT_GR_SMTICL)); 242 dev_dbg(dev, " ERRINTMSK : (0x%p)=0x%X\n", 243 priv->smba + ISMT_GR_ERRINTMSK, 244 readl(priv->smba + ISMT_GR_ERRINTMSK)); 245 dev_dbg(dev, " ERRAERMSK : (0x%p)=0x%X\n", 246 priv->smba + ISMT_GR_ERRAERMSK, 247 readl(priv->smba + ISMT_GR_ERRAERMSK)); 248 dev_dbg(dev, " ERRSTS... : (0x%p)=0x%X\n", 249 priv->smba + ISMT_GR_ERRSTS, 250 readl(priv->smba + ISMT_GR_ERRSTS)); 251 dev_dbg(dev, " ERRINFO.. : (0x%p)=0x%X\n", 252 priv->smba + ISMT_GR_ERRINFO, 253 readl(priv->smba + ISMT_GR_ERRINFO)); 254 } 255 256 /** 257 * ismt_mstr_reg_dump() - dump the iSMT Master Registers 258 * @priv: iSMT private data 259 */ 260 static void ismt_mstr_reg_dump(struct ismt_priv *priv) 261 { 262 struct device *dev = &priv->pci_dev->dev; 263 264 dev_dbg(dev, "Dump of the iSMT Master Registers\n"); 265 dev_dbg(dev, " MDBA..... : (0x%p)=0x%016llX\n", 266 priv->smba + ISMT_MSTR_MDBA, 267 (long long unsigned int)readq(priv->smba + ISMT_MSTR_MDBA)); 268 dev_dbg(dev, " MCTRL.... : (0x%p)=0x%X\n", 269 priv->smba + ISMT_MSTR_MCTRL, 270 readl(priv->smba + ISMT_MSTR_MCTRL)); 271 dev_dbg(dev, " MSTS..... : (0x%p)=0x%X\n", 272 priv->smba + ISMT_MSTR_MSTS, 273 readl(priv->smba + ISMT_MSTR_MSTS)); 274 dev_dbg(dev, " MDS...... : (0x%p)=0x%X\n", 275 priv->smba + ISMT_MSTR_MDS, 276 readl(priv->smba + ISMT_MSTR_MDS)); 277 dev_dbg(dev, " RPOLICY.. : (0x%p)=0x%X\n", 278 priv->smba + ISMT_MSTR_RPOLICY, 279 readl(priv->smba + ISMT_MSTR_RPOLICY)); 280 dev_dbg(dev, " SPGT..... : (0x%p)=0x%X\n", 281 priv->smba + ISMT_SPGT, 282 readl(priv->smba + ISMT_SPGT)); 283 } 284 285 /** 286 * ismt_submit_desc() - add a descriptor to the ring 287 * @priv: iSMT private data 288 */ 289 static void ismt_submit_desc(struct ismt_priv *priv) 290 { 291 uint fmhp; 292 uint val; 293 294 ismt_desc_dump(priv); 295 ismt_gen_reg_dump(priv); 296 ismt_mstr_reg_dump(priv); 297 298 /* Set the FMHP (Firmware Master Head Pointer)*/ 299 fmhp = ((priv->head + 1) % ISMT_DESC_ENTRIES) << 16; 300 val = readl(priv->smba + ISMT_MSTR_MCTRL); 301 writel((val & ~ISMT_MCTRL_FMHP) | fmhp, 302 priv->smba + ISMT_MSTR_MCTRL); 303 304 /* Set the start bit */ 305 val = readl(priv->smba + ISMT_MSTR_MCTRL); 306 writel(val | ISMT_MCTRL_SS, 307 priv->smba + ISMT_MSTR_MCTRL); 308 } 309 310 /** 311 * ismt_process_desc() - handle the completion of the descriptor 312 * @desc: the iSMT hardware descriptor 313 * @data: data buffer from the upper layer 314 * @priv: ismt_priv struct holding our dma buffer 315 * @size: SMBus transaction type 316 * @read_write: flag to indicate if this is a read or write 317 */ 318 static int ismt_process_desc(const struct ismt_desc *desc, 319 union i2c_smbus_data *data, 320 struct ismt_priv *priv, int size, 321 char read_write) 322 { 323 u8 *dma_buffer = priv->dma_buffer; 324 325 dev_dbg(&priv->pci_dev->dev, "Processing completed descriptor\n"); 326 __ismt_desc_dump(&priv->pci_dev->dev, desc); 327 328 if (desc->status & ISMT_DESC_SCS) { 329 if (read_write == I2C_SMBUS_WRITE && 330 size != I2C_SMBUS_PROC_CALL) 331 return 0; 332 333 switch (size) { 334 case I2C_SMBUS_BYTE: 335 case I2C_SMBUS_BYTE_DATA: 336 data->byte = dma_buffer[0]; 337 break; 338 case I2C_SMBUS_WORD_DATA: 339 case I2C_SMBUS_PROC_CALL: 340 data->word = dma_buffer[0] | (dma_buffer[1] << 8); 341 break; 342 case I2C_SMBUS_BLOCK_DATA: 343 case I2C_SMBUS_I2C_BLOCK_DATA: 344 memcpy(&data->block[1], dma_buffer, desc->rxbytes); 345 data->block[0] = desc->rxbytes; 346 break; 347 } 348 return 0; 349 } 350 351 if (likely(desc->status & ISMT_DESC_NAK)) 352 return -ENXIO; 353 354 if (desc->status & ISMT_DESC_CRC) 355 return -EBADMSG; 356 357 if (desc->status & ISMT_DESC_COL) 358 return -EAGAIN; 359 360 if (desc->status & ISMT_DESC_LPR) 361 return -EPROTO; 362 363 if (desc->status & (ISMT_DESC_DLTO | ISMT_DESC_CLTO)) 364 return -ETIMEDOUT; 365 366 return -EIO; 367 } 368 369 /** 370 * ismt_access() - process an SMBus command 371 * @adap: the i2c host adapter 372 * @addr: address of the i2c/SMBus target 373 * @flags: command options 374 * @read_write: read from or write to device 375 * @command: the i2c/SMBus command to issue 376 * @size: SMBus transaction type 377 * @data: read/write data buffer 378 */ 379 static int ismt_access(struct i2c_adapter *adap, u16 addr, 380 unsigned short flags, char read_write, u8 command, 381 int size, union i2c_smbus_data *data) 382 { 383 int ret; 384 unsigned long time_left; 385 dma_addr_t dma_addr = 0; /* address of the data buffer */ 386 u8 dma_size = 0; 387 enum dma_data_direction dma_direction = 0; 388 struct ismt_desc *desc; 389 struct ismt_priv *priv = i2c_get_adapdata(adap); 390 struct device *dev = &priv->pci_dev->dev; 391 392 desc = &priv->hw[priv->head]; 393 394 /* Initialize the DMA buffer */ 395 memset(priv->dma_buffer, 0, sizeof(priv->dma_buffer)); 396 397 /* Initialize the descriptor */ 398 memset(desc, 0, sizeof(struct ismt_desc)); 399 desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write); 400 401 /* Initialize common control bits */ 402 if (likely(pci_dev_msi_enabled(priv->pci_dev))) 403 desc->control = ISMT_DESC_INT | ISMT_DESC_FAIR; 404 else 405 desc->control = ISMT_DESC_FAIR; 406 407 if ((flags & I2C_CLIENT_PEC) && (size != I2C_SMBUS_QUICK) 408 && (size != I2C_SMBUS_I2C_BLOCK_DATA)) 409 desc->control |= ISMT_DESC_PEC; 410 411 switch (size) { 412 case I2C_SMBUS_QUICK: 413 dev_dbg(dev, "I2C_SMBUS_QUICK\n"); 414 break; 415 416 case I2C_SMBUS_BYTE: 417 if (read_write == I2C_SMBUS_WRITE) { 418 /* 419 * Send Byte 420 * The command field contains the write data 421 */ 422 dev_dbg(dev, "I2C_SMBUS_BYTE: WRITE\n"); 423 desc->control |= ISMT_DESC_CWRL; 424 desc->wr_len_cmd = command; 425 } else { 426 /* Receive Byte */ 427 dev_dbg(dev, "I2C_SMBUS_BYTE: READ\n"); 428 dma_size = 1; 429 dma_direction = DMA_FROM_DEVICE; 430 desc->rd_len = 1; 431 } 432 break; 433 434 case I2C_SMBUS_BYTE_DATA: 435 if (read_write == I2C_SMBUS_WRITE) { 436 /* 437 * Write Byte 438 * Command plus 1 data byte 439 */ 440 dev_dbg(dev, "I2C_SMBUS_BYTE_DATA: WRITE\n"); 441 desc->wr_len_cmd = 2; 442 dma_size = 2; 443 dma_direction = DMA_TO_DEVICE; 444 priv->dma_buffer[0] = command; 445 priv->dma_buffer[1] = data->byte; 446 } else { 447 /* Read Byte */ 448 dev_dbg(dev, "I2C_SMBUS_BYTE_DATA: READ\n"); 449 desc->control |= ISMT_DESC_CWRL; 450 desc->wr_len_cmd = command; 451 desc->rd_len = 1; 452 dma_size = 1; 453 dma_direction = DMA_FROM_DEVICE; 454 } 455 break; 456 457 case I2C_SMBUS_WORD_DATA: 458 if (read_write == I2C_SMBUS_WRITE) { 459 /* Write Word */ 460 dev_dbg(dev, "I2C_SMBUS_WORD_DATA: WRITE\n"); 461 desc->wr_len_cmd = 3; 462 dma_size = 3; 463 dma_direction = DMA_TO_DEVICE; 464 priv->dma_buffer[0] = command; 465 priv->dma_buffer[1] = data->word & 0xff; 466 priv->dma_buffer[2] = data->word >> 8; 467 } else { 468 /* Read Word */ 469 dev_dbg(dev, "I2C_SMBUS_WORD_DATA: READ\n"); 470 desc->wr_len_cmd = command; 471 desc->control |= ISMT_DESC_CWRL; 472 desc->rd_len = 2; 473 dma_size = 2; 474 dma_direction = DMA_FROM_DEVICE; 475 } 476 break; 477 478 case I2C_SMBUS_PROC_CALL: 479 dev_dbg(dev, "I2C_SMBUS_PROC_CALL\n"); 480 desc->wr_len_cmd = 3; 481 desc->rd_len = 2; 482 dma_size = 3; 483 dma_direction = DMA_BIDIRECTIONAL; 484 priv->dma_buffer[0] = command; 485 priv->dma_buffer[1] = data->word & 0xff; 486 priv->dma_buffer[2] = data->word >> 8; 487 break; 488 489 case I2C_SMBUS_BLOCK_DATA: 490 if (read_write == I2C_SMBUS_WRITE) { 491 /* Block Write */ 492 dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: WRITE\n"); 493 dma_size = data->block[0] + 1; 494 dma_direction = DMA_TO_DEVICE; 495 desc->wr_len_cmd = dma_size; 496 desc->control |= ISMT_DESC_BLK; 497 priv->dma_buffer[0] = command; 498 memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1); 499 } else { 500 /* Block Read */ 501 dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: READ\n"); 502 dma_size = I2C_SMBUS_BLOCK_MAX; 503 dma_direction = DMA_FROM_DEVICE; 504 desc->rd_len = dma_size; 505 desc->wr_len_cmd = command; 506 desc->control |= (ISMT_DESC_BLK | ISMT_DESC_CWRL); 507 } 508 break; 509 510 case I2C_SMBUS_I2C_BLOCK_DATA: 511 /* Make sure the length is valid */ 512 if (data->block[0] < 1) 513 data->block[0] = 1; 514 515 if (data->block[0] > I2C_SMBUS_BLOCK_MAX) 516 data->block[0] = I2C_SMBUS_BLOCK_MAX; 517 518 if (read_write == I2C_SMBUS_WRITE) { 519 /* i2c Block Write */ 520 dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA: WRITE\n"); 521 dma_size = data->block[0] + 1; 522 dma_direction = DMA_TO_DEVICE; 523 desc->wr_len_cmd = dma_size; 524 desc->control |= ISMT_DESC_I2C; 525 priv->dma_buffer[0] = command; 526 memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1); 527 } else { 528 /* i2c Block Read */ 529 dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA: READ\n"); 530 dma_size = data->block[0]; 531 dma_direction = DMA_FROM_DEVICE; 532 desc->rd_len = dma_size; 533 desc->wr_len_cmd = command; 534 desc->control |= (ISMT_DESC_I2C | ISMT_DESC_CWRL); 535 /* 536 * Per the "Table 15-15. I2C Commands", 537 * in the External Design Specification (EDS), 538 * (Document Number: 508084, Revision: 2.0), 539 * the _rw bit must be 0 540 */ 541 desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, 0); 542 } 543 break; 544 545 default: 546 dev_err(dev, "Unsupported transaction %d\n", 547 size); 548 return -EOPNOTSUPP; 549 } 550 551 /* map the data buffer */ 552 if (dma_size != 0) { 553 dev_dbg(dev, " dev=%p\n", dev); 554 dev_dbg(dev, " data=%p\n", data); 555 dev_dbg(dev, " dma_buffer=%p\n", priv->dma_buffer); 556 dev_dbg(dev, " dma_size=%d\n", dma_size); 557 dev_dbg(dev, " dma_direction=%d\n", dma_direction); 558 559 dma_addr = dma_map_single(dev, 560 priv->dma_buffer, 561 dma_size, 562 dma_direction); 563 564 if (dma_mapping_error(dev, dma_addr)) { 565 dev_err(dev, "Error in mapping dma buffer %p\n", 566 priv->dma_buffer); 567 return -EIO; 568 } 569 570 dev_dbg(dev, " dma_addr = 0x%016llX\n", 571 (unsigned long long)dma_addr); 572 573 desc->dptr_low = lower_32_bits(dma_addr); 574 desc->dptr_high = upper_32_bits(dma_addr); 575 } 576 577 reinit_completion(&priv->cmp); 578 579 /* Add the descriptor */ 580 ismt_submit_desc(priv); 581 582 /* Now we wait for interrupt completion, 1s */ 583 time_left = wait_for_completion_timeout(&priv->cmp, HZ*1); 584 585 /* unmap the data buffer */ 586 if (dma_size != 0) 587 dma_unmap_single(&adap->dev, dma_addr, dma_size, dma_direction); 588 589 if (unlikely(!time_left)) { 590 dev_err(dev, "completion wait timed out\n"); 591 ret = -ETIMEDOUT; 592 goto out; 593 } 594 595 /* do any post processing of the descriptor here */ 596 ret = ismt_process_desc(desc, data, priv, size, read_write); 597 598 out: 599 /* Update the ring pointer */ 600 priv->head++; 601 priv->head %= ISMT_DESC_ENTRIES; 602 603 return ret; 604 } 605 606 /** 607 * ismt_func() - report which i2c commands are supported by this adapter 608 * @adap: the i2c host adapter 609 */ 610 static u32 ismt_func(struct i2c_adapter *adap) 611 { 612 return I2C_FUNC_SMBUS_QUICK | 613 I2C_FUNC_SMBUS_BYTE | 614 I2C_FUNC_SMBUS_BYTE_DATA | 615 I2C_FUNC_SMBUS_WORD_DATA | 616 I2C_FUNC_SMBUS_PROC_CALL | 617 I2C_FUNC_SMBUS_BLOCK_DATA | 618 I2C_FUNC_SMBUS_I2C_BLOCK | 619 I2C_FUNC_SMBUS_PEC; 620 } 621 622 /** 623 * smbus_algorithm - the adapter algorithm and supported functionality 624 * @smbus_xfer: the adapter algorithm 625 * @functionality: functionality supported by the adapter 626 */ 627 static const struct i2c_algorithm smbus_algorithm = { 628 .smbus_xfer = ismt_access, 629 .functionality = ismt_func, 630 }; 631 632 /** 633 * ismt_handle_isr() - interrupt handler bottom half 634 * @priv: iSMT private data 635 */ 636 static irqreturn_t ismt_handle_isr(struct ismt_priv *priv) 637 { 638 complete(&priv->cmp); 639 640 return IRQ_HANDLED; 641 } 642 643 644 /** 645 * ismt_do_interrupt() - IRQ interrupt handler 646 * @vec: interrupt vector 647 * @data: iSMT private data 648 */ 649 static irqreturn_t ismt_do_interrupt(int vec, void *data) 650 { 651 u32 val; 652 struct ismt_priv *priv = data; 653 654 /* 655 * check to see it's our interrupt, return IRQ_NONE if not ours 656 * since we are sharing interrupt 657 */ 658 val = readl(priv->smba + ISMT_MSTR_MSTS); 659 660 if (!(val & (ISMT_MSTS_MIS | ISMT_MSTS_MEIS))) 661 return IRQ_NONE; 662 else 663 writel(val | ISMT_MSTS_MIS | ISMT_MSTS_MEIS, 664 priv->smba + ISMT_MSTR_MSTS); 665 666 return ismt_handle_isr(priv); 667 } 668 669 /** 670 * ismt_do_msi_interrupt() - MSI interrupt handler 671 * @vec: interrupt vector 672 * @data: iSMT private data 673 */ 674 static irqreturn_t ismt_do_msi_interrupt(int vec, void *data) 675 { 676 return ismt_handle_isr(data); 677 } 678 679 /** 680 * ismt_hw_init() - initialize the iSMT hardware 681 * @priv: iSMT private data 682 */ 683 static void ismt_hw_init(struct ismt_priv *priv) 684 { 685 u32 val; 686 struct device *dev = &priv->pci_dev->dev; 687 688 /* initialize the Master Descriptor Base Address (MDBA) */ 689 writeq(priv->io_rng_dma, priv->smba + ISMT_MSTR_MDBA); 690 691 /* initialize the Master Control Register (MCTRL) */ 692 writel(ISMT_MCTRL_MEIE, priv->smba + ISMT_MSTR_MCTRL); 693 694 /* initialize the Master Status Register (MSTS) */ 695 writel(0, priv->smba + ISMT_MSTR_MSTS); 696 697 /* initialize the Master Descriptor Size (MDS) */ 698 val = readl(priv->smba + ISMT_MSTR_MDS); 699 writel((val & ~ISMT_MDS_MASK) | (ISMT_DESC_ENTRIES - 1), 700 priv->smba + ISMT_MSTR_MDS); 701 702 /* 703 * Set the SMBus speed (could use this for slow HW debuggers) 704 */ 705 706 val = readl(priv->smba + ISMT_SPGT); 707 708 switch (bus_speed) { 709 case 0: 710 break; 711 712 case 80: 713 dev_dbg(dev, "Setting SMBus clock to 80 kHz\n"); 714 writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_80K), 715 priv->smba + ISMT_SPGT); 716 break; 717 718 case 100: 719 dev_dbg(dev, "Setting SMBus clock to 100 kHz\n"); 720 writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_100K), 721 priv->smba + ISMT_SPGT); 722 break; 723 724 case 400: 725 dev_dbg(dev, "Setting SMBus clock to 400 kHz\n"); 726 writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_400K), 727 priv->smba + ISMT_SPGT); 728 break; 729 730 case 1000: 731 dev_dbg(dev, "Setting SMBus clock to 1000 kHz\n"); 732 writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_1M), 733 priv->smba + ISMT_SPGT); 734 break; 735 736 default: 737 dev_warn(dev, "Invalid SMBus clock speed, only 0, 80, 100, 400, and 1000 are valid\n"); 738 break; 739 } 740 741 val = readl(priv->smba + ISMT_SPGT); 742 743 switch (val & ISMT_SPGT_SPD_MASK) { 744 case ISMT_SPGT_SPD_80K: 745 bus_speed = 80; 746 break; 747 case ISMT_SPGT_SPD_100K: 748 bus_speed = 100; 749 break; 750 case ISMT_SPGT_SPD_400K: 751 bus_speed = 400; 752 break; 753 case ISMT_SPGT_SPD_1M: 754 bus_speed = 1000; 755 break; 756 } 757 dev_dbg(dev, "SMBus clock is running at %d kHz\n", bus_speed); 758 } 759 760 /** 761 * ismt_dev_init() - initialize the iSMT data structures 762 * @priv: iSMT private data 763 */ 764 static int ismt_dev_init(struct ismt_priv *priv) 765 { 766 /* allocate memory for the descriptor */ 767 priv->hw = dmam_alloc_coherent(&priv->pci_dev->dev, 768 (ISMT_DESC_ENTRIES 769 * sizeof(struct ismt_desc)), 770 &priv->io_rng_dma, 771 GFP_KERNEL); 772 if (!priv->hw) 773 return -ENOMEM; 774 775 memset(priv->hw, 0, (ISMT_DESC_ENTRIES * sizeof(struct ismt_desc))); 776 777 priv->head = 0; 778 init_completion(&priv->cmp); 779 780 return 0; 781 } 782 783 /** 784 * ismt_int_init() - initialize interrupts 785 * @priv: iSMT private data 786 */ 787 static int ismt_int_init(struct ismt_priv *priv) 788 { 789 int err; 790 791 /* Try using MSI interrupts */ 792 err = pci_enable_msi(priv->pci_dev); 793 if (err) 794 goto intx; 795 796 err = devm_request_irq(&priv->pci_dev->dev, 797 priv->pci_dev->irq, 798 ismt_do_msi_interrupt, 799 0, 800 "ismt-msi", 801 priv); 802 if (err) { 803 pci_disable_msi(priv->pci_dev); 804 goto intx; 805 } 806 807 return 0; 808 809 /* Try using legacy interrupts */ 810 intx: 811 dev_warn(&priv->pci_dev->dev, 812 "Unable to use MSI interrupts, falling back to legacy\n"); 813 814 err = devm_request_irq(&priv->pci_dev->dev, 815 priv->pci_dev->irq, 816 ismt_do_interrupt, 817 IRQF_SHARED, 818 "ismt-intx", 819 priv); 820 if (err) { 821 dev_err(&priv->pci_dev->dev, "no usable interrupts\n"); 822 return err; 823 } 824 825 return 0; 826 } 827 828 static struct pci_driver ismt_driver; 829 830 /** 831 * ismt_probe() - probe for iSMT devices 832 * @pdev: PCI-Express device 833 * @id: PCI-Express device ID 834 */ 835 static int 836 ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id) 837 { 838 int err; 839 struct ismt_priv *priv; 840 unsigned long start, len; 841 842 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); 843 if (!priv) 844 return -ENOMEM; 845 846 pci_set_drvdata(pdev, priv); 847 848 i2c_set_adapdata(&priv->adapter, priv); 849 priv->adapter.owner = THIS_MODULE; 850 priv->adapter.class = I2C_CLASS_HWMON; 851 priv->adapter.algo = &smbus_algorithm; 852 priv->adapter.dev.parent = &pdev->dev; 853 ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev)); 854 priv->adapter.retries = ISMT_MAX_RETRIES; 855 856 priv->pci_dev = pdev; 857 858 err = pcim_enable_device(pdev); 859 if (err) { 860 dev_err(&pdev->dev, "Failed to enable SMBus PCI device (%d)\n", 861 err); 862 return err; 863 } 864 865 /* enable bus mastering */ 866 pci_set_master(pdev); 867 868 /* Determine the address of the SMBus area */ 869 start = pci_resource_start(pdev, SMBBAR); 870 len = pci_resource_len(pdev, SMBBAR); 871 if (!start || !len) { 872 dev_err(&pdev->dev, 873 "SMBus base address uninitialized, upgrade BIOS\n"); 874 return -ENODEV; 875 } 876 877 snprintf(priv->adapter.name, sizeof(priv->adapter.name), 878 "SMBus iSMT adapter at %lx", start); 879 880 dev_dbg(&priv->pci_dev->dev, " start=0x%lX\n", start); 881 dev_dbg(&priv->pci_dev->dev, " len=0x%lX\n", len); 882 883 err = acpi_check_resource_conflict(&pdev->resource[SMBBAR]); 884 if (err) { 885 dev_err(&pdev->dev, "ACPI resource conflict!\n"); 886 return err; 887 } 888 889 err = pci_request_region(pdev, SMBBAR, ismt_driver.name); 890 if (err) { 891 dev_err(&pdev->dev, 892 "Failed to request SMBus region 0x%lx-0x%lx\n", 893 start, start + len); 894 return err; 895 } 896 897 priv->smba = pcim_iomap(pdev, SMBBAR, len); 898 if (!priv->smba) { 899 dev_err(&pdev->dev, "Unable to ioremap SMBus BAR\n"); 900 return -ENODEV; 901 } 902 903 if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) || 904 (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)) { 905 if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) || 906 (pci_set_consistent_dma_mask(pdev, 907 DMA_BIT_MASK(32)) != 0)) { 908 dev_err(&pdev->dev, "pci_set_dma_mask fail %p\n", 909 pdev); 910 return -ENODEV; 911 } 912 } 913 914 err = ismt_dev_init(priv); 915 if (err) 916 return err; 917 918 ismt_hw_init(priv); 919 920 err = ismt_int_init(priv); 921 if (err) 922 return err; 923 924 err = i2c_add_adapter(&priv->adapter); 925 if (err) { 926 dev_err(&pdev->dev, "Failed to add SMBus iSMT adapter\n"); 927 return -ENODEV; 928 } 929 return 0; 930 } 931 932 /** 933 * ismt_remove() - release driver resources 934 * @pdev: PCI-Express device 935 */ 936 static void ismt_remove(struct pci_dev *pdev) 937 { 938 struct ismt_priv *priv = pci_get_drvdata(pdev); 939 940 i2c_del_adapter(&priv->adapter); 941 } 942 943 static struct pci_driver ismt_driver = { 944 .name = "ismt_smbus", 945 .id_table = ismt_ids, 946 .probe = ismt_probe, 947 .remove = ismt_remove, 948 }; 949 950 module_pci_driver(ismt_driver); 951 952 MODULE_LICENSE("Dual BSD/GPL"); 953 MODULE_AUTHOR("Bill E. Brown <bill.e.brown@intel.com>"); 954 MODULE_DESCRIPTION("Intel SMBus Message Transport (iSMT) driver"); 955