1 /* 2 * drivers/i2c/busses/i2c-ibm_iic.c 3 * 4 * Support for the IIC peripheral on IBM PPC 4xx 5 * 6 * Copyright (c) 2003, 2004 Zultys Technologies. 7 * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> 8 * 9 * Copyright (c) 2008 PIKA Technologies 10 * Sean MacLennan <smaclennan@pikatech.com> 11 * 12 * Based on original work by 13 * Ian DaSilva <idasilva@mvista.com> 14 * Armin Kuster <akuster@mvista.com> 15 * Matt Porter <mporter@mvista.com> 16 * 17 * Copyright 2000-2003 MontaVista Software Inc. 18 * 19 * Original driver version was highly leveraged from i2c-elektor.c 20 * 21 * Copyright 1995-97 Simon G. Vogl 22 * 1998-99 Hans Berglund 23 * 24 * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> 25 * and even Frodo Looijaard <frodol@dds.nl> 26 * 27 * This program is free software; you can redistribute it and/or modify it 28 * under the terms of the GNU General Public License as published by the 29 * Free Software Foundation; either version 2 of the License, or (at your 30 * option) any later version. 31 * 32 */ 33 34 #include <linux/module.h> 35 #include <linux/kernel.h> 36 #include <linux/ioport.h> 37 #include <linux/delay.h> 38 #include <linux/slab.h> 39 #include <linux/init.h> 40 #include <linux/interrupt.h> 41 #include <asm/irq.h> 42 #include <linux/io.h> 43 #include <linux/i2c.h> 44 #include <linux/of_platform.h> 45 #include <linux/of_i2c.h> 46 47 #include "i2c-ibm_iic.h" 48 49 #define DRIVER_VERSION "2.2" 50 51 MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION); 52 MODULE_LICENSE("GPL"); 53 54 static bool iic_force_poll; 55 module_param(iic_force_poll, bool, 0); 56 MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); 57 58 static bool iic_force_fast; 59 module_param(iic_force_fast, bool, 0); 60 MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)"); 61 62 #define DBG_LEVEL 0 63 64 #ifdef DBG 65 #undef DBG 66 #endif 67 68 #ifdef DBG2 69 #undef DBG2 70 #endif 71 72 #if DBG_LEVEL > 0 73 # define DBG(f,x...) printk(KERN_DEBUG "ibm-iic" f, ##x) 74 #else 75 # define DBG(f,x...) ((void)0) 76 #endif 77 #if DBG_LEVEL > 1 78 # define DBG2(f,x...) DBG(f, ##x) 79 #else 80 # define DBG2(f,x...) ((void)0) 81 #endif 82 #if DBG_LEVEL > 2 83 static void dump_iic_regs(const char* header, struct ibm_iic_private* dev) 84 { 85 volatile struct iic_regs __iomem *iic = dev->vaddr; 86 printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header); 87 printk(KERN_DEBUG 88 " cntl = 0x%02x, mdcntl = 0x%02x\n" 89 " sts = 0x%02x, extsts = 0x%02x\n" 90 " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" 91 " xtcntlss = 0x%02x, directcntl = 0x%02x\n", 92 in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), 93 in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), 94 in_8(&iic->xtcntlss), in_8(&iic->directcntl)); 95 } 96 # define DUMP_REGS(h,dev) dump_iic_regs((h),(dev)) 97 #else 98 # define DUMP_REGS(h,dev) ((void)0) 99 #endif 100 101 /* Bus timings (in ns) for bit-banging */ 102 static struct i2c_timings { 103 unsigned int hd_sta; 104 unsigned int su_sto; 105 unsigned int low; 106 unsigned int high; 107 unsigned int buf; 108 } timings [] = { 109 /* Standard mode (100 KHz) */ 110 { 111 .hd_sta = 4000, 112 .su_sto = 4000, 113 .low = 4700, 114 .high = 4000, 115 .buf = 4700, 116 }, 117 /* Fast mode (400 KHz) */ 118 { 119 .hd_sta = 600, 120 .su_sto = 600, 121 .low = 1300, 122 .high = 600, 123 .buf = 1300, 124 }}; 125 126 /* Enable/disable interrupt generation */ 127 static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable) 128 { 129 out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0); 130 } 131 132 /* 133 * Initialize IIC interface. 134 */ 135 static void iic_dev_init(struct ibm_iic_private* dev) 136 { 137 volatile struct iic_regs __iomem *iic = dev->vaddr; 138 139 DBG("%d: init\n", dev->idx); 140 141 /* Clear master address */ 142 out_8(&iic->lmadr, 0); 143 out_8(&iic->hmadr, 0); 144 145 /* Clear slave address */ 146 out_8(&iic->lsadr, 0); 147 out_8(&iic->hsadr, 0); 148 149 /* Clear status & extended status */ 150 out_8(&iic->sts, STS_SCMP | STS_IRQA); 151 out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA 152 | EXTSTS_ICT | EXTSTS_XFRA); 153 154 /* Set clock divider */ 155 out_8(&iic->clkdiv, dev->clckdiv); 156 157 /* Clear transfer count */ 158 out_8(&iic->xfrcnt, 0); 159 160 /* Clear extended control and status */ 161 out_8(&iic->xtcntlss, XTCNTLSS_SRC | XTCNTLSS_SRS | XTCNTLSS_SWC 162 | XTCNTLSS_SWS); 163 164 /* Clear control register */ 165 out_8(&iic->cntl, 0); 166 167 /* Enable interrupts if possible */ 168 iic_interrupt_mode(dev, dev->irq >= 0); 169 170 /* Set mode control */ 171 out_8(&iic->mdcntl, MDCNTL_FMDB | MDCNTL_EINT | MDCNTL_EUBS 172 | (dev->fast_mode ? MDCNTL_FSM : 0)); 173 174 DUMP_REGS("iic_init", dev); 175 } 176 177 /* 178 * Reset IIC interface 179 */ 180 static void iic_dev_reset(struct ibm_iic_private* dev) 181 { 182 volatile struct iic_regs __iomem *iic = dev->vaddr; 183 int i; 184 u8 dc; 185 186 DBG("%d: soft reset\n", dev->idx); 187 DUMP_REGS("reset", dev); 188 189 /* Place chip in the reset state */ 190 out_8(&iic->xtcntlss, XTCNTLSS_SRST); 191 192 /* Check if bus is free */ 193 dc = in_8(&iic->directcntl); 194 if (!DIRCTNL_FREE(dc)){ 195 DBG("%d: trying to regain bus control\n", dev->idx); 196 197 /* Try to set bus free state */ 198 out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); 199 200 /* Wait until we regain bus control */ 201 for (i = 0; i < 100; ++i){ 202 dc = in_8(&iic->directcntl); 203 if (DIRCTNL_FREE(dc)) 204 break; 205 206 /* Toggle SCL line */ 207 dc ^= DIRCNTL_SCC; 208 out_8(&iic->directcntl, dc); 209 udelay(10); 210 dc ^= DIRCNTL_SCC; 211 out_8(&iic->directcntl, dc); 212 213 /* be nice */ 214 cond_resched(); 215 } 216 } 217 218 /* Remove reset */ 219 out_8(&iic->xtcntlss, 0); 220 221 /* Reinitialize interface */ 222 iic_dev_init(dev); 223 } 224 225 /* 226 * Do 0-length transaction using bit-banging through IIC_DIRECTCNTL register. 227 */ 228 229 /* Wait for SCL and/or SDA to be high */ 230 static int iic_dc_wait(volatile struct iic_regs __iomem *iic, u8 mask) 231 { 232 unsigned long x = jiffies + HZ / 28 + 2; 233 while ((in_8(&iic->directcntl) & mask) != mask){ 234 if (unlikely(time_after(jiffies, x))) 235 return -1; 236 cond_resched(); 237 } 238 return 0; 239 } 240 241 static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p) 242 { 243 volatile struct iic_regs __iomem *iic = dev->vaddr; 244 const struct i2c_timings* t = &timings[dev->fast_mode ? 1 : 0]; 245 u8 mask, v, sda; 246 int i, res; 247 248 /* Only 7-bit addresses are supported */ 249 if (unlikely(p->flags & I2C_M_TEN)){ 250 DBG("%d: smbus_quick - 10 bit addresses are not supported\n", 251 dev->idx); 252 return -EINVAL; 253 } 254 255 DBG("%d: smbus_quick(0x%02x)\n", dev->idx, p->addr); 256 257 /* Reset IIC interface */ 258 out_8(&iic->xtcntlss, XTCNTLSS_SRST); 259 260 /* Wait for bus to become free */ 261 out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); 262 if (unlikely(iic_dc_wait(iic, DIRCNTL_MSDA | DIRCNTL_MSC))) 263 goto err; 264 ndelay(t->buf); 265 266 /* START */ 267 out_8(&iic->directcntl, DIRCNTL_SCC); 268 sda = 0; 269 ndelay(t->hd_sta); 270 271 /* Send address */ 272 v = (u8)((p->addr << 1) | ((p->flags & I2C_M_RD) ? 1 : 0)); 273 for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){ 274 out_8(&iic->directcntl, sda); 275 ndelay(t->low / 2); 276 sda = (v & mask) ? DIRCNTL_SDAC : 0; 277 out_8(&iic->directcntl, sda); 278 ndelay(t->low / 2); 279 280 out_8(&iic->directcntl, DIRCNTL_SCC | sda); 281 if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) 282 goto err; 283 ndelay(t->high); 284 } 285 286 /* ACK */ 287 out_8(&iic->directcntl, sda); 288 ndelay(t->low / 2); 289 out_8(&iic->directcntl, DIRCNTL_SDAC); 290 ndelay(t->low / 2); 291 out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); 292 if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) 293 goto err; 294 res = (in_8(&iic->directcntl) & DIRCNTL_MSDA) ? -EREMOTEIO : 1; 295 ndelay(t->high); 296 297 /* STOP */ 298 out_8(&iic->directcntl, 0); 299 ndelay(t->low); 300 out_8(&iic->directcntl, DIRCNTL_SCC); 301 if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) 302 goto err; 303 ndelay(t->su_sto); 304 out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); 305 306 ndelay(t->buf); 307 308 DBG("%d: smbus_quick -> %s\n", dev->idx, res ? "NACK" : "ACK"); 309 out: 310 /* Remove reset */ 311 out_8(&iic->xtcntlss, 0); 312 313 /* Reinitialize interface */ 314 iic_dev_init(dev); 315 316 return res; 317 err: 318 DBG("%d: smbus_quick - bus is stuck\n", dev->idx); 319 res = -EREMOTEIO; 320 goto out; 321 } 322 323 /* 324 * IIC interrupt handler 325 */ 326 static irqreturn_t iic_handler(int irq, void *dev_id) 327 { 328 struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id; 329 volatile struct iic_regs __iomem *iic = dev->vaddr; 330 331 DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n", 332 dev->idx, in_8(&iic->sts), in_8(&iic->extsts)); 333 334 /* Acknowledge IRQ and wakeup iic_wait_for_tc */ 335 out_8(&iic->sts, STS_IRQA | STS_SCMP); 336 wake_up_interruptible(&dev->wq); 337 338 return IRQ_HANDLED; 339 } 340 341 /* 342 * Get master transfer result and clear errors if any. 343 * Returns the number of actually transferred bytes or error (<0) 344 */ 345 static int iic_xfer_result(struct ibm_iic_private* dev) 346 { 347 volatile struct iic_regs __iomem *iic = dev->vaddr; 348 349 if (unlikely(in_8(&iic->sts) & STS_ERR)){ 350 DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx, 351 in_8(&iic->extsts)); 352 353 /* Clear errors and possible pending IRQs */ 354 out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | 355 EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA); 356 357 /* Flush master data buffer */ 358 out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); 359 360 /* Is bus free? 361 * If error happened during combined xfer 362 * IIC interface is usually stuck in some strange 363 * state, the only way out - soft reset. 364 */ 365 if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ 366 DBG("%d: bus is stuck, resetting\n", dev->idx); 367 iic_dev_reset(dev); 368 } 369 return -EREMOTEIO; 370 } 371 else 372 return in_8(&iic->xfrcnt) & XFRCNT_MTC_MASK; 373 } 374 375 /* 376 * Try to abort active transfer. 377 */ 378 static void iic_abort_xfer(struct ibm_iic_private* dev) 379 { 380 volatile struct iic_regs __iomem *iic = dev->vaddr; 381 unsigned long x; 382 383 DBG("%d: iic_abort_xfer\n", dev->idx); 384 385 out_8(&iic->cntl, CNTL_HMT); 386 387 /* 388 * Wait for the abort command to complete. 389 * It's not worth to be optimized, just poll (timeout >= 1 tick) 390 */ 391 x = jiffies + 2; 392 while ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ 393 if (time_after(jiffies, x)){ 394 DBG("%d: abort timeout, resetting...\n", dev->idx); 395 iic_dev_reset(dev); 396 return; 397 } 398 schedule(); 399 } 400 401 /* Just to clear errors */ 402 iic_xfer_result(dev); 403 } 404 405 /* 406 * Wait for master transfer to complete. 407 * It puts current process to sleep until we get interrupt or timeout expires. 408 * Returns the number of transferred bytes or error (<0) 409 */ 410 static int iic_wait_for_tc(struct ibm_iic_private* dev){ 411 412 volatile struct iic_regs __iomem *iic = dev->vaddr; 413 int ret = 0; 414 415 if (dev->irq >= 0){ 416 /* Interrupt mode */ 417 ret = wait_event_interruptible_timeout(dev->wq, 418 !(in_8(&iic->sts) & STS_PT), dev->adap.timeout); 419 420 if (unlikely(ret < 0)) 421 DBG("%d: wait interrupted\n", dev->idx); 422 else if (unlikely(in_8(&iic->sts) & STS_PT)){ 423 DBG("%d: wait timeout\n", dev->idx); 424 ret = -ETIMEDOUT; 425 } 426 } 427 else { 428 /* Polling mode */ 429 unsigned long x = jiffies + dev->adap.timeout; 430 431 while (in_8(&iic->sts) & STS_PT){ 432 if (unlikely(time_after(jiffies, x))){ 433 DBG("%d: poll timeout\n", dev->idx); 434 ret = -ETIMEDOUT; 435 break; 436 } 437 438 if (unlikely(signal_pending(current))){ 439 DBG("%d: poll interrupted\n", dev->idx); 440 ret = -ERESTARTSYS; 441 break; 442 } 443 schedule(); 444 } 445 } 446 447 if (unlikely(ret < 0)) 448 iic_abort_xfer(dev); 449 else 450 ret = iic_xfer_result(dev); 451 452 DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret); 453 454 return ret; 455 } 456 457 /* 458 * Low level master transfer routine 459 */ 460 static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, 461 int combined_xfer) 462 { 463 volatile struct iic_regs __iomem *iic = dev->vaddr; 464 char* buf = pm->buf; 465 int i, j, loops, ret = 0; 466 int len = pm->len; 467 468 u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT; 469 if (pm->flags & I2C_M_RD) 470 cntl |= CNTL_RW; 471 472 loops = (len + 3) / 4; 473 for (i = 0; i < loops; ++i, len -= 4){ 474 int count = len > 4 ? 4 : len; 475 u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT); 476 477 if (!(cntl & CNTL_RW)) 478 for (j = 0; j < count; ++j) 479 out_8((void __iomem *)&iic->mdbuf, *buf++); 480 481 if (i < loops - 1) 482 cmd |= CNTL_CHT; 483 else if (combined_xfer) 484 cmd |= CNTL_RPST; 485 486 DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd); 487 488 /* Start transfer */ 489 out_8(&iic->cntl, cmd); 490 491 /* Wait for completion */ 492 ret = iic_wait_for_tc(dev); 493 494 if (unlikely(ret < 0)) 495 break; 496 else if (unlikely(ret != count)){ 497 DBG("%d: xfer_bytes, requested %d, transferred %d\n", 498 dev->idx, count, ret); 499 500 /* If it's not a last part of xfer, abort it */ 501 if (combined_xfer || (i < loops - 1)) 502 iic_abort_xfer(dev); 503 504 ret = -EREMOTEIO; 505 break; 506 } 507 508 if (cntl & CNTL_RW) 509 for (j = 0; j < count; ++j) 510 *buf++ = in_8((void __iomem *)&iic->mdbuf); 511 } 512 513 return ret > 0 ? 0 : ret; 514 } 515 516 /* 517 * Set target slave address for master transfer 518 */ 519 static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg) 520 { 521 volatile struct iic_regs __iomem *iic = dev->vaddr; 522 u16 addr = msg->addr; 523 524 DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx, 525 addr, msg->flags & I2C_M_TEN ? 10 : 7); 526 527 if (msg->flags & I2C_M_TEN){ 528 out_8(&iic->cntl, CNTL_AMD); 529 out_8(&iic->lmadr, addr); 530 out_8(&iic->hmadr, 0xf0 | ((addr >> 7) & 0x06)); 531 } 532 else { 533 out_8(&iic->cntl, 0); 534 out_8(&iic->lmadr, addr << 1); 535 } 536 } 537 538 static inline int iic_invalid_address(const struct i2c_msg* p) 539 { 540 return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f)); 541 } 542 543 static inline int iic_address_neq(const struct i2c_msg* p1, 544 const struct i2c_msg* p2) 545 { 546 return (p1->addr != p2->addr) 547 || ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN)); 548 } 549 550 /* 551 * Generic master transfer entrypoint. 552 * Returns the number of processed messages or error (<0) 553 */ 554 static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) 555 { 556 struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap)); 557 volatile struct iic_regs __iomem *iic = dev->vaddr; 558 int i, ret = 0; 559 560 DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num); 561 562 if (!num) 563 return 0; 564 565 /* Check the sanity of the passed messages. 566 * Uhh, generic i2c layer is more suitable place for such code... 567 */ 568 if (unlikely(iic_invalid_address(&msgs[0]))){ 569 DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx, 570 msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7); 571 return -EINVAL; 572 } 573 for (i = 0; i < num; ++i){ 574 if (unlikely(msgs[i].len <= 0)){ 575 if (num == 1 && !msgs[0].len){ 576 /* Special case for I2C_SMBUS_QUICK emulation. 577 * IBM IIC doesn't support 0-length transactions 578 * so we have to emulate them using bit-banging. 579 */ 580 return iic_smbus_quick(dev, &msgs[0]); 581 } 582 DBG("%d: invalid len %d in msg[%d]\n", dev->idx, 583 msgs[i].len, i); 584 return -EINVAL; 585 } 586 if (unlikely(iic_address_neq(&msgs[0], &msgs[i]))){ 587 DBG("%d: invalid addr in msg[%d]\n", dev->idx, i); 588 return -EINVAL; 589 } 590 } 591 592 /* Check bus state */ 593 if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){ 594 DBG("%d: iic_xfer, bus is not free\n", dev->idx); 595 596 /* Usually it means something serious has happened. 597 * We *cannot* have unfinished previous transfer 598 * so it doesn't make any sense to try to stop it. 599 * Probably we were not able to recover from the 600 * previous error. 601 * The only *reasonable* thing I can think of here 602 * is soft reset. --ebs 603 */ 604 iic_dev_reset(dev); 605 606 if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ 607 DBG("%d: iic_xfer, bus is still not free\n", dev->idx); 608 return -EREMOTEIO; 609 } 610 } 611 else { 612 /* Flush master data buffer (just in case) */ 613 out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); 614 } 615 616 /* Load slave address */ 617 iic_address(dev, &msgs[0]); 618 619 /* Do real transfer */ 620 for (i = 0; i < num && !ret; ++i) 621 ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1); 622 623 return ret < 0 ? ret : num; 624 } 625 626 static u32 iic_func(struct i2c_adapter *adap) 627 { 628 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR; 629 } 630 631 static const struct i2c_algorithm iic_algo = { 632 .master_xfer = iic_xfer, 633 .functionality = iic_func 634 }; 635 636 /* 637 * Calculates IICx_CLCKDIV value for a specific OPB clock frequency 638 */ 639 static inline u8 iic_clckdiv(unsigned int opb) 640 { 641 /* Compatibility kludge, should go away after all cards 642 * are fixed to fill correct value for opbfreq. 643 * Previous driver version used hardcoded divider value 4, 644 * it corresponds to OPB frequency from the range (40, 50] MHz 645 */ 646 if (!opb){ 647 printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq," 648 " fix your board specific setup\n"); 649 opb = 50000000; 650 } 651 652 /* Convert to MHz */ 653 opb /= 1000000; 654 655 if (opb < 20 || opb > 150){ 656 printk(KERN_WARNING "ibm-iic: invalid OPB clock frequency %u MHz\n", 657 opb); 658 opb = opb < 20 ? 20 : 150; 659 } 660 return (u8)((opb + 9) / 10 - 1); 661 } 662 663 static int __devinit iic_request_irq(struct platform_device *ofdev, 664 struct ibm_iic_private *dev) 665 { 666 struct device_node *np = ofdev->dev.of_node; 667 int irq; 668 669 if (iic_force_poll) 670 return 0; 671 672 irq = irq_of_parse_and_map(np, 0); 673 if (!irq) { 674 dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n"); 675 return 0; 676 } 677 678 /* Disable interrupts until we finish initialization, assumes 679 * level-sensitive IRQ setup... 680 */ 681 iic_interrupt_mode(dev, 0); 682 if (request_irq(irq, iic_handler, 0, "IBM IIC", dev)) { 683 dev_err(&ofdev->dev, "request_irq %d failed\n", irq); 684 /* Fallback to the polling mode */ 685 return 0; 686 } 687 688 return irq; 689 } 690 691 /* 692 * Register single IIC interface 693 */ 694 static int __devinit iic_probe(struct platform_device *ofdev) 695 { 696 struct device_node *np = ofdev->dev.of_node; 697 struct ibm_iic_private *dev; 698 struct i2c_adapter *adap; 699 const u32 *freq; 700 int ret; 701 702 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 703 if (!dev) { 704 dev_err(&ofdev->dev, "failed to allocate device data\n"); 705 return -ENOMEM; 706 } 707 708 dev_set_drvdata(&ofdev->dev, dev); 709 710 dev->vaddr = of_iomap(np, 0); 711 if (dev->vaddr == NULL) { 712 dev_err(&ofdev->dev, "failed to iomap device\n"); 713 ret = -ENXIO; 714 goto error_cleanup; 715 } 716 717 init_waitqueue_head(&dev->wq); 718 719 dev->irq = iic_request_irq(ofdev, dev); 720 if (!dev->irq) 721 dev_warn(&ofdev->dev, "using polling mode\n"); 722 723 /* Board specific settings */ 724 if (iic_force_fast || of_get_property(np, "fast-mode", NULL)) 725 dev->fast_mode = 1; 726 727 freq = of_get_property(np, "clock-frequency", NULL); 728 if (freq == NULL) { 729 freq = of_get_property(np->parent, "clock-frequency", NULL); 730 if (freq == NULL) { 731 dev_err(&ofdev->dev, "Unable to get bus frequency\n"); 732 ret = -EINVAL; 733 goto error_cleanup; 734 } 735 } 736 737 dev->clckdiv = iic_clckdiv(*freq); 738 dev_dbg(&ofdev->dev, "clckdiv = %d\n", dev->clckdiv); 739 740 /* Initialize IIC interface */ 741 iic_dev_init(dev); 742 743 /* Register it with i2c layer */ 744 adap = &dev->adap; 745 adap->dev.parent = &ofdev->dev; 746 adap->dev.of_node = of_node_get(np); 747 strlcpy(adap->name, "IBM IIC", sizeof(adap->name)); 748 i2c_set_adapdata(adap, dev); 749 adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; 750 adap->algo = &iic_algo; 751 adap->timeout = HZ; 752 753 ret = i2c_add_adapter(adap); 754 if (ret < 0) { 755 dev_err(&ofdev->dev, "failed to register i2c adapter\n"); 756 goto error_cleanup; 757 } 758 759 dev_info(&ofdev->dev, "using %s mode\n", 760 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); 761 762 /* Now register all the child nodes */ 763 of_i2c_register_devices(adap); 764 765 return 0; 766 767 error_cleanup: 768 if (dev->irq) { 769 iic_interrupt_mode(dev, 0); 770 free_irq(dev->irq, dev); 771 } 772 773 if (dev->vaddr) 774 iounmap(dev->vaddr); 775 776 dev_set_drvdata(&ofdev->dev, NULL); 777 kfree(dev); 778 return ret; 779 } 780 781 /* 782 * Cleanup initialized IIC interface 783 */ 784 static int __devexit iic_remove(struct platform_device *ofdev) 785 { 786 struct ibm_iic_private *dev = dev_get_drvdata(&ofdev->dev); 787 788 dev_set_drvdata(&ofdev->dev, NULL); 789 790 i2c_del_adapter(&dev->adap); 791 792 if (dev->irq) { 793 iic_interrupt_mode(dev, 0); 794 free_irq(dev->irq, dev); 795 } 796 797 iounmap(dev->vaddr); 798 kfree(dev); 799 800 return 0; 801 } 802 803 static const struct of_device_id ibm_iic_match[] = { 804 { .compatible = "ibm,iic", }, 805 {} 806 }; 807 808 static struct platform_driver ibm_iic_driver = { 809 .driver = { 810 .name = "ibm-iic", 811 .owner = THIS_MODULE, 812 .of_match_table = ibm_iic_match, 813 }, 814 .probe = iic_probe, 815 .remove = __devexit_p(iic_remove), 816 }; 817 818 module_platform_driver(ibm_iic_driver); 819