1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, 4 Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker 5 <mdsxyz123@yahoo.com> 6 Copyright (C) 2007 - 2014 Jean Delvare <jdelvare@suse.de> 7 Copyright (C) 2010 Intel Corporation, 8 David Woodhouse <dwmw2@infradead.org> 9 10 */ 11 12 /* 13 * Supports the following Intel I/O Controller Hubs (ICH): 14 * 15 * I/O Block I2C 16 * region SMBus Block proc. block 17 * Chip name PCI ID size PEC buffer call read 18 * --------------------------------------------------------------------------- 19 * 82801AA (ICH) 0x2413 16 no no no no 20 * 82801AB (ICH0) 0x2423 16 no no no no 21 * 82801BA (ICH2) 0x2443 16 no no no no 22 * 82801CA (ICH3) 0x2483 32 soft no no no 23 * 82801DB (ICH4) 0x24c3 32 hard yes no no 24 * 82801E (ICH5) 0x24d3 32 hard yes yes yes 25 * 6300ESB 0x25a4 32 hard yes yes yes 26 * 82801F (ICH6) 0x266a 32 hard yes yes yes 27 * 6310ESB/6320ESB 0x269b 32 hard yes yes yes 28 * 82801G (ICH7) 0x27da 32 hard yes yes yes 29 * 82801H (ICH8) 0x283e 32 hard yes yes yes 30 * 82801I (ICH9) 0x2930 32 hard yes yes yes 31 * EP80579 (Tolapai) 0x5032 32 hard yes yes yes 32 * ICH10 0x3a30 32 hard yes yes yes 33 * ICH10 0x3a60 32 hard yes yes yes 34 * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes 35 * 6 Series (PCH) 0x1c22 32 hard yes yes yes 36 * Patsburg (PCH) 0x1d22 32 hard yes yes yes 37 * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes 38 * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes 39 * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes 40 * DH89xxCC (PCH) 0x2330 32 hard yes yes yes 41 * Panther Point (PCH) 0x1e22 32 hard yes yes yes 42 * Lynx Point (PCH) 0x8c22 32 hard yes yes yes 43 * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes 44 * Avoton (SOC) 0x1f3c 32 hard yes yes yes 45 * Wellsburg (PCH) 0x8d22 32 hard yes yes yes 46 * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes 47 * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes 48 * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes 49 * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes 50 * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes 51 * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes 52 * BayTrail (SOC) 0x0f12 32 hard yes yes yes 53 * Braswell (SOC) 0x2292 32 hard yes yes yes 54 * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes 55 * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes 56 * DNV (SOC) 0x19df 32 hard yes yes yes 57 * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes 58 * Broxton (SOC) 0x5ad4 32 hard yes yes yes 59 * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes 60 * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes 61 * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes 62 * Gemini Lake (SOC) 0x31d4 32 hard yes yes yes 63 * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes 64 * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes 65 * Cedar Fork (PCH) 0x18df 32 hard yes yes yes 66 * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes 67 * Ice Lake-N (PCH) 0x38a3 32 hard yes yes yes 68 * Comet Lake (PCH) 0x02a3 32 hard yes yes yes 69 * Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes 70 * Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes 71 * Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes 72 * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes 73 * Jasper Lake (SOC) 0x4da3 32 hard yes yes yes 74 * Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes 75 * Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes 76 * Alder Lake-P (PCH) 0x51a3 32 hard yes yes yes 77 * Alder Lake-M (PCH) 0x54a3 32 hard yes yes yes 78 * Raptor Lake-S (PCH) 0x7a23 32 hard yes yes yes 79 * Meteor Lake-P (SOC) 0x7e22 32 hard yes yes yes 80 * Meteor Lake SoC-S (SOC) 0xae22 32 hard yes yes yes 81 * Meteor Lake PCH-S (PCH) 0x7f23 32 hard yes yes yes 82 * Birch Stream (SOC) 0x5796 32 hard yes yes yes 83 * Arrow Lake-H (SOC) 0x7722 32 hard yes yes yes 84 * Panther Lake-H (SOC) 0xe322 32 hard yes yes yes 85 * Panther Lake-P (SOC) 0xe422 32 hard yes yes yes 86 * 87 * Features supported by this driver: 88 * Software PEC no 89 * Hardware PEC yes 90 * Block buffer yes 91 * Block process call transaction yes 92 * I2C block read transaction yes (doesn't use the block buffer) 93 * Target mode no 94 * SMBus Host Notify yes 95 * Interrupt processing yes 96 * 97 * See the file Documentation/i2c/busses/i2c-i801.rst for details. 98 */ 99 100 #define DRV_NAME "i801_smbus" 101 102 #include <linux/interrupt.h> 103 #include <linux/module.h> 104 #include <linux/pci.h> 105 #include <linux/kernel.h> 106 #include <linux/stddef.h> 107 #include <linux/delay.h> 108 #include <linux/ioport.h> 109 #include <linux/init.h> 110 #include <linux/i2c.h> 111 #include <linux/i2c-mux.h> 112 #include <linux/i2c-smbus.h> 113 #include <linux/acpi.h> 114 #include <linux/io.h> 115 #include <linux/dmi.h> 116 #include <linux/slab.h> 117 #include <linux/string.h> 118 #include <linux/completion.h> 119 #include <linux/err.h> 120 #include <linux/platform_device.h> 121 #include <linux/platform_data/itco_wdt.h> 122 #include <linux/platform_data/x86/p2sb.h> 123 #include <linux/pm_runtime.h> 124 #include <linux/mutex.h> 125 126 #ifdef CONFIG_I2C_I801_MUX 127 #include <linux/gpio/machine.h> 128 #include <linux/platform_data/i2c-mux-gpio.h> 129 #endif 130 131 /* I801 SMBus address offsets */ 132 #define SMBHSTSTS(p) (0 + (p)->smba) 133 #define SMBHSTCNT(p) (2 + (p)->smba) 134 #define SMBHSTCMD(p) (3 + (p)->smba) 135 #define SMBHSTADD(p) (4 + (p)->smba) 136 #define SMBHSTDAT0(p) (5 + (p)->smba) 137 #define SMBHSTDAT1(p) (6 + (p)->smba) 138 #define SMBBLKDAT(p) (7 + (p)->smba) 139 #define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */ 140 #define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */ 141 #define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */ 142 #define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */ 143 #define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */ 144 #define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */ 145 146 /* PCI Address Constants */ 147 #define SMBBAR 4 148 #define SMBHSTCFG 0x040 149 #define TCOBASE 0x050 150 #define TCOCTL 0x054 151 152 #define SBREG_SMBCTRL 0xc6000c 153 #define SBREG_SMBCTRL_DNV 0xcf000c 154 155 /* Host configuration bits for SMBHSTCFG */ 156 #define SMBHSTCFG_HST_EN BIT(0) 157 #define SMBHSTCFG_SMB_SMI_EN BIT(1) 158 #define SMBHSTCFG_I2C_EN BIT(2) 159 #define SMBHSTCFG_SPD_WD BIT(4) 160 161 /* TCO configuration bits for TCOCTL */ 162 #define TCOCTL_EN BIT(8) 163 164 /* Auxiliary status register bits, ICH4+ only */ 165 #define SMBAUXSTS_CRCE BIT(0) 166 #define SMBAUXSTS_STCO BIT(1) 167 168 /* Auxiliary control register bits, ICH4+ only */ 169 #define SMBAUXCTL_CRC BIT(0) 170 #define SMBAUXCTL_E32B BIT(1) 171 172 /* I801 command constants */ 173 #define I801_QUICK 0x00 174 #define I801_BYTE 0x04 175 #define I801_BYTE_DATA 0x08 176 #define I801_WORD_DATA 0x0C 177 #define I801_PROC_CALL 0x10 178 #define I801_BLOCK_DATA 0x14 179 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ 180 #define I801_BLOCK_PROC_CALL 0x1C 181 182 /* I801 Host Control register bits */ 183 #define SMBHSTCNT_INTREN BIT(0) 184 #define SMBHSTCNT_KILL BIT(1) 185 #define SMBHSTCNT_LAST_BYTE BIT(5) 186 #define SMBHSTCNT_START BIT(6) 187 #define SMBHSTCNT_PEC_EN BIT(7) /* ICH3 and later */ 188 189 /* I801 Hosts Status register bits */ 190 #define SMBHSTSTS_BYTE_DONE BIT(7) 191 #define SMBHSTSTS_INUSE_STS BIT(6) 192 #define SMBHSTSTS_SMBALERT_STS BIT(5) 193 #define SMBHSTSTS_FAILED BIT(4) 194 #define SMBHSTSTS_BUS_ERR BIT(3) 195 #define SMBHSTSTS_DEV_ERR BIT(2) 196 #define SMBHSTSTS_INTR BIT(1) 197 #define SMBHSTSTS_HOST_BUSY BIT(0) 198 199 /* Host Notify Status register bits */ 200 #define SMBSLVSTS_HST_NTFY_STS BIT(0) 201 202 /* Host Notify Command register bits */ 203 #define SMBSLVCMD_SMBALERT_DISABLE BIT(2) 204 #define SMBSLVCMD_HST_NTFY_INTREN BIT(0) 205 206 #define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ 207 SMBHSTSTS_DEV_ERR) 208 209 #define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \ 210 STATUS_ERROR_FLAGS) 211 212 #define SMBUS_LEN_SENTINEL (I2C_SMBUS_BLOCK_MAX + 1) 213 214 /* Older devices have their ID defined in <linux/pci_ids.h> */ 215 #define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3 216 #define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS 0x06a3 217 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 218 #define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df 219 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df 220 #define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9 221 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 222 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 223 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ 224 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 225 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 226 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 227 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 228 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c 229 #define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292 230 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 231 #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 232 #define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4 233 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3 234 #define PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS 0x38a3 235 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 236 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3 237 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23 238 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3 239 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3 240 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3 241 #define PCI_DEVICE_ID_INTEL_BIRCH_STREAM_SMBUS 0x5796 242 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 243 #define PCI_DEVICE_ID_INTEL_ARROW_LAKE_H_SMBUS 0x7722 244 #define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23 245 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3 246 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_P_SMBUS 0x7e22 247 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_PCH_S_SMBUS 0x7f23 248 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 249 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2 250 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22 251 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d 252 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e 253 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f 254 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 255 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 256 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 257 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3 258 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS 0xa0a3 259 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 260 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3 261 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223 262 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3 263 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323 264 #define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS 0xa3a3 265 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_SOC_S_SMBUS 0xae22 266 #define PCI_DEVICE_ID_INTEL_PANTHER_LAKE_H_SMBUS 0xe322 267 #define PCI_DEVICE_ID_INTEL_PANTHER_LAKE_P_SMBUS 0xe422 268 269 struct i801_mux_config { 270 char *gpio_chip; 271 unsigned values[3]; 272 int n_values; 273 unsigned gpios[2]; /* Relative to gpio_chip->base */ 274 int n_gpios; 275 }; 276 277 struct i801_priv { 278 struct i2c_adapter adapter; 279 unsigned long smba; 280 unsigned char original_hstcfg; 281 unsigned char original_hstcnt; 282 unsigned char original_slvcmd; 283 struct pci_dev *pci_dev; 284 unsigned int features; 285 286 /* isr processing */ 287 struct completion done; 288 u8 status; 289 290 /* Command state used by isr for byte-by-byte block transactions */ 291 u8 cmd; 292 bool is_read; 293 int count; 294 int len; 295 u8 *data; 296 297 #ifdef CONFIG_I2C_I801_MUX 298 struct platform_device *mux_pdev; 299 struct gpiod_lookup_table *lookup; 300 struct notifier_block mux_notifier_block; 301 #endif 302 struct platform_device *tco_pdev; 303 304 /* 305 * If set to true the host controller registers are reserved for 306 * ACPI AML use. 307 */ 308 bool acpi_reserved; 309 }; 310 311 #define FEATURE_SMBUS_PEC BIT(0) 312 #define FEATURE_BLOCK_BUFFER BIT(1) 313 #define FEATURE_BLOCK_PROC BIT(2) 314 #define FEATURE_I2C_BLOCK_READ BIT(3) 315 #define FEATURE_IRQ BIT(4) 316 #define FEATURE_HOST_NOTIFY BIT(5) 317 /* Not really a feature, but it's convenient to handle it as such */ 318 #define FEATURE_IDF BIT(15) 319 #define FEATURE_TCO_SPT BIT(16) 320 #define FEATURE_TCO_CNL BIT(17) 321 322 static const char *i801_feature_names[] = { 323 "SMBus PEC", 324 "Block buffer", 325 "Block process call", 326 "I2C block read", 327 "Interrupt", 328 "SMBus Host Notify", 329 }; 330 331 static unsigned int disable_features; 332 module_param(disable_features, uint, S_IRUGO | S_IWUSR); 333 MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n" 334 "\t\t 0x01 disable SMBus PEC\n" 335 "\t\t 0x02 disable the block buffer\n" 336 "\t\t 0x08 disable the I2C block read functionality\n" 337 "\t\t 0x10 don't use interrupts\n" 338 "\t\t 0x20 disable SMBus Host Notify "); 339 340 static int i801_get_block_len(struct i801_priv *priv) 341 { 342 u8 len = inb_p(SMBHSTDAT0(priv)); 343 344 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { 345 pci_err(priv->pci_dev, "Illegal SMBus block read size %u\n", len); 346 return -EPROTO; 347 } 348 349 return len; 350 } 351 352 static int i801_check_and_clear_pec_error(struct i801_priv *priv) 353 { 354 u8 status; 355 356 if (!(priv->features & FEATURE_SMBUS_PEC)) 357 return 0; 358 359 status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE; 360 if (status) { 361 outb_p(status, SMBAUXSTS(priv)); 362 return -EBADMSG; 363 } 364 365 return 0; 366 } 367 368 /* Make sure the SMBus host is ready to start transmitting. 369 Return 0 if it is, -EBUSY if it is not. */ 370 static int i801_check_pre(struct i801_priv *priv) 371 { 372 int status, result; 373 374 status = inb_p(SMBHSTSTS(priv)); 375 if (status & SMBHSTSTS_HOST_BUSY) { 376 pci_err(priv->pci_dev, "SMBus is busy, can't use it!\n"); 377 return -EBUSY; 378 } 379 380 status &= STATUS_FLAGS; 381 if (status) { 382 pci_dbg(priv->pci_dev, "Clearing status flags (%02x)\n", status); 383 outb_p(status, SMBHSTSTS(priv)); 384 } 385 386 /* 387 * Clear CRC status if needed. 388 * During normal operation, i801_check_post() takes care 389 * of it after every operation. We do it here only in case 390 * the hardware was already in this state when the driver 391 * started. 392 */ 393 result = i801_check_and_clear_pec_error(priv); 394 if (result) 395 pci_dbg(priv->pci_dev, "Clearing aux status flag CRCE\n"); 396 397 return 0; 398 } 399 400 static int i801_check_post(struct i801_priv *priv, int status) 401 { 402 int result = 0; 403 404 /* 405 * If the SMBus is still busy, we give up 406 */ 407 if (unlikely(status < 0)) { 408 /* try to stop the current command */ 409 outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv)); 410 usleep_range(1000, 2000); 411 outb_p(0, SMBHSTCNT(priv)); 412 413 /* Check if it worked */ 414 status = inb_p(SMBHSTSTS(priv)); 415 if ((status & SMBHSTSTS_HOST_BUSY) || 416 !(status & SMBHSTSTS_FAILED)) 417 dev_dbg(&priv->pci_dev->dev, 418 "Failed terminating the transaction\n"); 419 return -ETIMEDOUT; 420 } 421 422 if (status & SMBHSTSTS_FAILED) { 423 result = -EIO; 424 dev_err(&priv->pci_dev->dev, "Transaction failed\n"); 425 } 426 if (status & SMBHSTSTS_DEV_ERR) { 427 /* 428 * This may be a PEC error, check and clear it. 429 * 430 * AUXSTS is handled differently from HSTSTS. 431 * For HSTSTS, i801_isr() or i801_wait_intr() 432 * has already cleared the error bits in hardware, 433 * and we are passed a copy of the original value 434 * in "status". 435 * For AUXSTS, the hardware register is left 436 * for us to handle here. 437 * This is asymmetric, slightly iffy, but safe, 438 * since all this code is serialized and the CRCE 439 * bit is harmless as long as it's cleared before 440 * the next operation. 441 */ 442 result = i801_check_and_clear_pec_error(priv); 443 if (result) { 444 pci_dbg(priv->pci_dev, "PEC error\n"); 445 } else { 446 result = -ENXIO; 447 pci_dbg(priv->pci_dev, "No response\n"); 448 } 449 } 450 if (status & SMBHSTSTS_BUS_ERR) { 451 result = -EAGAIN; 452 dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); 453 } 454 455 return result; 456 } 457 458 /* Wait for BUSY being cleared and either INTR or an error flag being set */ 459 static int i801_wait_intr(struct i801_priv *priv) 460 { 461 unsigned long timeout = jiffies + priv->adapter.timeout; 462 int status, busy; 463 464 do { 465 usleep_range(250, 500); 466 status = inb_p(SMBHSTSTS(priv)); 467 busy = status & SMBHSTSTS_HOST_BUSY; 468 status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR; 469 if (!busy && status) 470 return status & STATUS_ERROR_FLAGS; 471 } while (time_is_after_eq_jiffies(timeout)); 472 473 return -ETIMEDOUT; 474 } 475 476 /* Wait for either BYTE_DONE or an error flag being set */ 477 static int i801_wait_byte_done(struct i801_priv *priv) 478 { 479 unsigned long timeout = jiffies + priv->adapter.timeout; 480 int status; 481 482 do { 483 usleep_range(250, 500); 484 status = inb_p(SMBHSTSTS(priv)); 485 if (status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) 486 return status & STATUS_ERROR_FLAGS; 487 } while (time_is_after_eq_jiffies(timeout)); 488 489 return -ETIMEDOUT; 490 } 491 492 static int i801_transaction(struct i801_priv *priv, int xact) 493 { 494 unsigned long result; 495 const struct i2c_adapter *adap = &priv->adapter; 496 497 if (priv->features & FEATURE_IRQ) { 498 reinit_completion(&priv->done); 499 outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START, 500 SMBHSTCNT(priv)); 501 result = wait_for_completion_timeout(&priv->done, adap->timeout); 502 return result ? priv->status : -ETIMEDOUT; 503 } 504 505 outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); 506 507 return i801_wait_intr(priv); 508 } 509 510 static int i801_block_transaction_by_block(struct i801_priv *priv, 511 union i2c_smbus_data *data, 512 char read_write, int command) 513 { 514 int i, len, status, xact; 515 516 switch (command) { 517 case I2C_SMBUS_BLOCK_PROC_CALL: 518 xact = I801_BLOCK_PROC_CALL; 519 break; 520 case I2C_SMBUS_BLOCK_DATA: 521 xact = I801_BLOCK_DATA; 522 break; 523 default: 524 return -EOPNOTSUPP; 525 } 526 527 /* Set block buffer mode */ 528 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv)); 529 530 if (read_write == I2C_SMBUS_WRITE) { 531 len = data->block[0]; 532 outb_p(len, SMBHSTDAT0(priv)); 533 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ 534 for (i = 0; i < len; i++) 535 outb_p(data->block[i+1], SMBBLKDAT(priv)); 536 } 537 538 status = i801_transaction(priv, xact); 539 if (status) 540 goto out; 541 542 if (read_write == I2C_SMBUS_READ || 543 command == I2C_SMBUS_BLOCK_PROC_CALL) { 544 len = i801_get_block_len(priv); 545 if (len < 0) { 546 status = len; 547 goto out; 548 } 549 550 data->block[0] = len; 551 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ 552 for (i = 0; i < len; i++) 553 data->block[i + 1] = inb_p(SMBBLKDAT(priv)); 554 } 555 out: 556 outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_E32B, SMBAUXCTL(priv)); 557 return status; 558 } 559 560 static void i801_isr_byte_done(struct i801_priv *priv) 561 { 562 if (priv->is_read) { 563 /* 564 * At transfer start i801_smbus_block_transaction() marks 565 * the block length as invalid. Check for this sentinel value 566 * and read the block length from SMBHSTDAT0. 567 */ 568 if (priv->len == SMBUS_LEN_SENTINEL) { 569 priv->len = i801_get_block_len(priv); 570 if (priv->len < 0) 571 /* FIXME: Recover */ 572 priv->len = I2C_SMBUS_BLOCK_MAX; 573 574 priv->data[-1] = priv->len; 575 } 576 577 /* Read next byte */ 578 if (priv->count < priv->len) 579 priv->data[priv->count++] = inb(SMBBLKDAT(priv)); 580 else 581 dev_dbg(&priv->pci_dev->dev, 582 "Discarding extra byte on block read\n"); 583 584 /* Set LAST_BYTE for last byte of read transaction */ 585 if (priv->count == priv->len - 1) 586 outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE, 587 SMBHSTCNT(priv)); 588 } else if (priv->count < priv->len - 1) { 589 /* Write next byte, except for IRQ after last byte */ 590 outb_p(priv->data[++priv->count], SMBBLKDAT(priv)); 591 } 592 } 593 594 static irqreturn_t i801_host_notify_isr(struct i801_priv *priv) 595 { 596 unsigned short addr; 597 598 addr = inb_p(SMBNTFDADD(priv)) >> 1; 599 600 /* 601 * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba) 602 * always returns 0. Our current implementation doesn't provide 603 * data, so we just ignore it. 604 */ 605 i2c_handle_smbus_host_notify(&priv->adapter, addr); 606 607 /* clear Host Notify bit and return */ 608 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); 609 return IRQ_HANDLED; 610 } 611 612 /* 613 * There are three kinds of interrupts: 614 * 615 * 1) i801 signals transaction completion with one of these interrupts: 616 * INTR - Success 617 * DEV_ERR - Invalid command, NAK or communication timeout 618 * BUS_ERR - SMI# transaction collision 619 * FAILED - transaction was canceled due to a KILL request 620 * When any of these occur, update ->status and signal completion. 621 * 622 * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt 623 * occurs for each byte of a byte-by-byte to prepare the next byte. 624 * 625 * 3) Host Notify interrupts 626 */ 627 static irqreturn_t i801_isr(int irq, void *dev_id) 628 { 629 struct i801_priv *priv = dev_id; 630 u16 pcists; 631 u8 status; 632 633 /* Confirm this is our interrupt */ 634 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists); 635 if (!(pcists & PCI_STATUS_INTERRUPT)) 636 return IRQ_NONE; 637 638 if (priv->features & FEATURE_HOST_NOTIFY) { 639 status = inb_p(SMBSLVSTS(priv)); 640 if (status & SMBSLVSTS_HST_NTFY_STS) 641 return i801_host_notify_isr(priv); 642 } 643 644 status = inb_p(SMBHSTSTS(priv)); 645 if ((status & (SMBHSTSTS_BYTE_DONE | STATUS_ERROR_FLAGS)) == SMBHSTSTS_BYTE_DONE) 646 i801_isr_byte_done(priv); 647 648 /* 649 * Clear IRQ sources: SMB_ALERT status is set after signal assertion 650 * independently of the interrupt generation being blocked or not 651 * so clear it always when the status is set. 652 */ 653 status &= STATUS_FLAGS | SMBHSTSTS_SMBALERT_STS; 654 outb_p(status, SMBHSTSTS(priv)); 655 656 status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR; 657 if (status) { 658 priv->status = status & STATUS_ERROR_FLAGS; 659 complete(&priv->done); 660 } 661 662 return IRQ_HANDLED; 663 } 664 665 /* 666 * For "byte-by-byte" block transactions: 667 * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1 668 * I2C read uses cmd=I801_I2C_BLOCK_DATA 669 */ 670 static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, 671 union i2c_smbus_data *data, 672 char read_write, int command) 673 { 674 int i, len; 675 int smbcmd; 676 int status; 677 unsigned long result; 678 const struct i2c_adapter *adap = &priv->adapter; 679 680 if (command == I2C_SMBUS_BLOCK_PROC_CALL) 681 return -EOPNOTSUPP; 682 683 len = data->block[0]; 684 685 if (read_write == I2C_SMBUS_WRITE) { 686 outb_p(len, SMBHSTDAT0(priv)); 687 outb_p(data->block[1], SMBBLKDAT(priv)); 688 } 689 690 if (command == I2C_SMBUS_I2C_BLOCK_DATA && 691 read_write == I2C_SMBUS_READ) 692 smbcmd = I801_I2C_BLOCK_DATA; 693 else 694 smbcmd = I801_BLOCK_DATA; 695 696 if (priv->features & FEATURE_IRQ) { 697 priv->is_read = (read_write == I2C_SMBUS_READ); 698 if (len == 1 && priv->is_read) 699 smbcmd |= SMBHSTCNT_LAST_BYTE; 700 priv->cmd = smbcmd | SMBHSTCNT_INTREN; 701 priv->len = len; 702 priv->count = 0; 703 priv->data = &data->block[1]; 704 705 reinit_completion(&priv->done); 706 outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv)); 707 result = wait_for_completion_timeout(&priv->done, adap->timeout); 708 return result ? priv->status : -ETIMEDOUT; 709 } 710 711 if (len == 1 && read_write == I2C_SMBUS_READ) 712 smbcmd |= SMBHSTCNT_LAST_BYTE; 713 outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv)); 714 715 for (i = 1; i <= len; i++) { 716 status = i801_wait_byte_done(priv); 717 if (status) 718 return status; 719 720 /* 721 * At transfer start i801_smbus_block_transaction() marks 722 * the block length as invalid. Check for this sentinel value 723 * and read the block length from SMBHSTDAT0. 724 */ 725 if (len == SMBUS_LEN_SENTINEL) { 726 len = i801_get_block_len(priv); 727 if (len < 0) { 728 /* Recover */ 729 while (inb_p(SMBHSTSTS(priv)) & 730 SMBHSTSTS_HOST_BUSY) 731 outb_p(SMBHSTSTS_BYTE_DONE, 732 SMBHSTSTS(priv)); 733 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); 734 return -EPROTO; 735 } 736 data->block[0] = len; 737 } 738 739 if (read_write == I2C_SMBUS_READ) { 740 data->block[i] = inb_p(SMBBLKDAT(priv)); 741 if (i == len - 1) 742 outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv)); 743 } 744 745 if (read_write == I2C_SMBUS_WRITE && i+1 <= len) 746 outb_p(data->block[i+1], SMBBLKDAT(priv)); 747 748 /* signals SMBBLKDAT ready */ 749 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); 750 } 751 752 return i801_wait_intr(priv); 753 } 754 755 static void i801_set_hstadd(struct i801_priv *priv, u8 addr, char read_write) 756 { 757 outb_p((addr << 1) | (read_write & 0x01), SMBHSTADD(priv)); 758 } 759 760 /* Single value transaction function */ 761 static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data *data, 762 u8 addr, u8 hstcmd, char read_write, int command) 763 { 764 int xact, ret; 765 766 switch (command) { 767 case I2C_SMBUS_QUICK: 768 i801_set_hstadd(priv, addr, read_write); 769 xact = I801_QUICK; 770 break; 771 case I2C_SMBUS_BYTE: 772 i801_set_hstadd(priv, addr, read_write); 773 if (read_write == I2C_SMBUS_WRITE) 774 outb_p(hstcmd, SMBHSTCMD(priv)); 775 xact = I801_BYTE; 776 break; 777 case I2C_SMBUS_BYTE_DATA: 778 i801_set_hstadd(priv, addr, read_write); 779 if (read_write == I2C_SMBUS_WRITE) 780 outb_p(data->byte, SMBHSTDAT0(priv)); 781 outb_p(hstcmd, SMBHSTCMD(priv)); 782 xact = I801_BYTE_DATA; 783 break; 784 case I2C_SMBUS_WORD_DATA: 785 i801_set_hstadd(priv, addr, read_write); 786 if (read_write == I2C_SMBUS_WRITE) { 787 outb_p(data->word & 0xff, SMBHSTDAT0(priv)); 788 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); 789 } 790 outb_p(hstcmd, SMBHSTCMD(priv)); 791 xact = I801_WORD_DATA; 792 break; 793 case I2C_SMBUS_PROC_CALL: 794 i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE); 795 outb_p(data->word & 0xff, SMBHSTDAT0(priv)); 796 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); 797 outb_p(hstcmd, SMBHSTCMD(priv)); 798 read_write = I2C_SMBUS_READ; 799 xact = I801_PROC_CALL; 800 break; 801 default: 802 pci_err(priv->pci_dev, "Unsupported transaction %d\n", command); 803 return -EOPNOTSUPP; 804 } 805 806 ret = i801_transaction(priv, xact); 807 if (ret || read_write == I2C_SMBUS_WRITE) 808 return ret; 809 810 switch (command) { 811 case I2C_SMBUS_BYTE: 812 case I2C_SMBUS_BYTE_DATA: 813 data->byte = inb_p(SMBHSTDAT0(priv)); 814 break; 815 case I2C_SMBUS_WORD_DATA: 816 case I2C_SMBUS_PROC_CALL: 817 data->word = inb_p(SMBHSTDAT0(priv)) + 818 (inb_p(SMBHSTDAT1(priv)) << 8); 819 break; 820 } 821 822 return 0; 823 } 824 825 static int i801_smbus_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data, 826 u8 addr, u8 hstcmd, char read_write, int command) 827 { 828 if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA) 829 /* Mark block length as invalid */ 830 data->block[0] = SMBUS_LEN_SENTINEL; 831 else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) 832 return -EPROTO; 833 834 if (command == I2C_SMBUS_BLOCK_PROC_CALL) 835 /* Needs to be flagged as write transaction */ 836 i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE); 837 else 838 i801_set_hstadd(priv, addr, read_write); 839 outb_p(hstcmd, SMBHSTCMD(priv)); 840 841 if (priv->features & FEATURE_BLOCK_BUFFER) 842 return i801_block_transaction_by_block(priv, data, read_write, command); 843 else 844 return i801_block_transaction_byte_by_byte(priv, data, read_write, command); 845 } 846 847 static int i801_i2c_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data, 848 u8 addr, u8 hstcmd, char read_write, int command) 849 { 850 int result; 851 u8 hostc; 852 853 if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) 854 return -EPROTO; 855 /* 856 * NB: page 240 of ICH5 datasheet shows that the R/#W bit should be cleared here, 857 * even when reading. However if SPD Write Disable is set (Lynx Point and later), 858 * the read will fail if we don't set the R/#W bit. 859 */ 860 i801_set_hstadd(priv, addr, 861 priv->original_hstcfg & SMBHSTCFG_SPD_WD ? read_write : I2C_SMBUS_WRITE); 862 863 /* NB: page 240 of ICH5 datasheet shows that DATA1 is the cmd field when reading */ 864 if (read_write == I2C_SMBUS_READ) 865 outb_p(hstcmd, SMBHSTDAT1(priv)); 866 else 867 outb_p(hstcmd, SMBHSTCMD(priv)); 868 869 if (read_write == I2C_SMBUS_WRITE) { 870 /* set I2C_EN bit in configuration register */ 871 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); 872 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN); 873 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { 874 pci_err(priv->pci_dev, "I2C block read is unsupported!\n"); 875 return -EOPNOTSUPP; 876 } 877 878 /* Block buffer isn't supported for I2C block transactions */ 879 result = i801_block_transaction_byte_by_byte(priv, data, read_write, command); 880 881 /* restore saved configuration register value */ 882 if (read_write == I2C_SMBUS_WRITE) 883 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc); 884 885 return result; 886 } 887 888 /* Return negative errno on error. */ 889 static s32 i801_access(struct i2c_adapter *adap, u16 addr, 890 unsigned short flags, char read_write, u8 command, 891 int size, union i2c_smbus_data *data) 892 { 893 int hwpec, ret; 894 struct i801_priv *priv = i2c_get_adapdata(adap); 895 896 if (priv->acpi_reserved) 897 return -EBUSY; 898 899 pm_runtime_get_sync(&priv->pci_dev->dev); 900 901 ret = i801_check_pre(priv); 902 if (ret) 903 goto out; 904 905 hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) 906 && size != I2C_SMBUS_QUICK 907 && size != I2C_SMBUS_I2C_BLOCK_DATA; 908 909 if (hwpec) /* enable/disable hardware PEC */ 910 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv)); 911 else 912 outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), 913 SMBAUXCTL(priv)); 914 915 if (size == I2C_SMBUS_BLOCK_DATA || size == I2C_SMBUS_BLOCK_PROC_CALL) 916 ret = i801_smbus_block_transaction(priv, data, addr, command, read_write, size); 917 else if (size == I2C_SMBUS_I2C_BLOCK_DATA) 918 ret = i801_i2c_block_transaction(priv, data, addr, command, read_write, size); 919 else 920 ret = i801_simple_transaction(priv, data, addr, command, read_write, size); 921 922 ret = i801_check_post(priv, ret); 923 924 /* Some BIOSes don't like it when PEC is enabled at reboot or resume 925 * time, so we forcibly disable it after every transaction. 926 */ 927 if (hwpec) 928 outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_CRC, SMBAUXCTL(priv)); 929 out: 930 /* 931 * Unlock the SMBus device for use by BIOS/ACPI, 932 * and clear status flags if not done already. 933 */ 934 outb_p(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv)); 935 936 pm_runtime_mark_last_busy(&priv->pci_dev->dev); 937 pm_runtime_put_autosuspend(&priv->pci_dev->dev); 938 return ret; 939 } 940 941 942 static u32 i801_func(struct i2c_adapter *adapter) 943 { 944 struct i801_priv *priv = i2c_get_adapdata(adapter); 945 946 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 947 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 948 I2C_FUNC_SMBUS_PROC_CALL | 949 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | 950 ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | 951 ((priv->features & FEATURE_BLOCK_PROC) ? 952 I2C_FUNC_SMBUS_BLOCK_PROC_CALL : 0) | 953 ((priv->features & FEATURE_I2C_BLOCK_READ) ? 954 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | 955 ((priv->features & FEATURE_HOST_NOTIFY) ? 956 I2C_FUNC_SMBUS_HOST_NOTIFY : 0); 957 } 958 959 static void i801_enable_host_notify(struct i2c_adapter *adapter) 960 { 961 struct i801_priv *priv = i2c_get_adapdata(adapter); 962 963 if (!(priv->features & FEATURE_HOST_NOTIFY)) 964 return; 965 966 /* 967 * Enable host notify interrupt and block the generation of interrupt 968 * from the SMB_ALERT signal because the driver does not support 969 * SMBus Alert. 970 */ 971 outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE | 972 priv->original_slvcmd, SMBSLVCMD(priv)); 973 974 /* clear Host Notify bit to allow a new notification */ 975 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); 976 } 977 978 static void i801_disable_host_notify(struct i801_priv *priv) 979 { 980 if (!(priv->features & FEATURE_HOST_NOTIFY)) 981 return; 982 983 outb_p(priv->original_slvcmd, SMBSLVCMD(priv)); 984 } 985 986 static const struct i2c_algorithm smbus_algorithm = { 987 .smbus_xfer = i801_access, 988 .functionality = i801_func, 989 }; 990 991 #define FEATURES_ICH4 (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \ 992 FEATURE_HOST_NOTIFY) 993 #define FEATURES_ICH5 (FEATURES_ICH4 | FEATURE_BLOCK_PROC | \ 994 FEATURE_I2C_BLOCK_READ | FEATURE_IRQ) 995 996 static const struct pci_device_id i801_ids[] = { 997 { PCI_DEVICE_DATA(INTEL, 82801AA_3, 0) }, 998 { PCI_DEVICE_DATA(INTEL, 82801AB_3, 0) }, 999 { PCI_DEVICE_DATA(INTEL, 82801BA_2, 0) }, 1000 { PCI_DEVICE_DATA(INTEL, 82801CA_3, FEATURE_HOST_NOTIFY) }, 1001 { PCI_DEVICE_DATA(INTEL, 82801DB_3, FEATURES_ICH4) }, 1002 { PCI_DEVICE_DATA(INTEL, 82801EB_3, FEATURES_ICH5) }, 1003 { PCI_DEVICE_DATA(INTEL, ESB_4, FEATURES_ICH5) }, 1004 { PCI_DEVICE_DATA(INTEL, ICH6_16, FEATURES_ICH5) }, 1005 { PCI_DEVICE_DATA(INTEL, ICH7_17, FEATURES_ICH5) }, 1006 { PCI_DEVICE_DATA(INTEL, ESB2_17, FEATURES_ICH5) }, 1007 { PCI_DEVICE_DATA(INTEL, ICH8_5, FEATURES_ICH5) }, 1008 { PCI_DEVICE_DATA(INTEL, ICH9_6, FEATURES_ICH5) }, 1009 { PCI_DEVICE_DATA(INTEL, EP80579_1, FEATURES_ICH5) }, 1010 { PCI_DEVICE_DATA(INTEL, ICH10_4, FEATURES_ICH5) }, 1011 { PCI_DEVICE_DATA(INTEL, ICH10_5, FEATURES_ICH5) }, 1012 { PCI_DEVICE_DATA(INTEL, 5_3400_SERIES_SMBUS, FEATURES_ICH5) }, 1013 { PCI_DEVICE_DATA(INTEL, COUGARPOINT_SMBUS, FEATURES_ICH5) }, 1014 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS, FEATURES_ICH5) }, 1015 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF0, FEATURES_ICH5 | FEATURE_IDF) }, 1016 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF1, FEATURES_ICH5 | FEATURE_IDF) }, 1017 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF2, FEATURES_ICH5 | FEATURE_IDF) }, 1018 { PCI_DEVICE_DATA(INTEL, DH89XXCC_SMBUS, FEATURES_ICH5) }, 1019 { PCI_DEVICE_DATA(INTEL, PANTHERPOINT_SMBUS, FEATURES_ICH5) }, 1020 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_SMBUS, FEATURES_ICH5) }, 1021 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_LP_SMBUS, FEATURES_ICH5) }, 1022 { PCI_DEVICE_DATA(INTEL, AVOTON_SMBUS, FEATURES_ICH5) }, 1023 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS, FEATURES_ICH5) }, 1024 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS0, FEATURES_ICH5 | FEATURE_IDF) }, 1025 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS1, FEATURES_ICH5 | FEATURE_IDF) }, 1026 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS2, FEATURES_ICH5 | FEATURE_IDF) }, 1027 { PCI_DEVICE_DATA(INTEL, COLETOCREEK_SMBUS, FEATURES_ICH5) }, 1028 { PCI_DEVICE_DATA(INTEL, GEMINILAKE_SMBUS, FEATURES_ICH5) }, 1029 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_SMBUS, FEATURES_ICH5) }, 1030 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_LP_SMBUS, FEATURES_ICH5) }, 1031 { PCI_DEVICE_DATA(INTEL, BAYTRAIL_SMBUS, FEATURES_ICH5) }, 1032 { PCI_DEVICE_DATA(INTEL, BRASWELL_SMBUS, FEATURES_ICH5) }, 1033 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1034 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1035 { PCI_DEVICE_DATA(INTEL, CDF_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1036 { PCI_DEVICE_DATA(INTEL, DNV_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1037 { PCI_DEVICE_DATA(INTEL, EBG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1038 { PCI_DEVICE_DATA(INTEL, BROXTON_SMBUS, FEATURES_ICH5) }, 1039 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1040 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SSKU_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1041 { PCI_DEVICE_DATA(INTEL, KABYLAKE_PCH_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1042 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1043 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1044 { PCI_DEVICE_DATA(INTEL, ICELAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1045 { PCI_DEVICE_DATA(INTEL, ICELAKE_N_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1046 { PCI_DEVICE_DATA(INTEL, COMETLAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1047 { PCI_DEVICE_DATA(INTEL, COMETLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1048 { PCI_DEVICE_DATA(INTEL, COMETLAKE_V_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1049 { PCI_DEVICE_DATA(INTEL, ELKHART_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1050 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1051 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1052 { PCI_DEVICE_DATA(INTEL, JASPER_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1053 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1054 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1055 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_M_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1056 { PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1057 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1058 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_SOC_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1059 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_PCH_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1060 { PCI_DEVICE_DATA(INTEL, BIRCH_STREAM_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1061 { PCI_DEVICE_DATA(INTEL, ARROW_LAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1062 { PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1063 { PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1064 { 0, } 1065 }; 1066 1067 MODULE_DEVICE_TABLE(pci, i801_ids); 1068 1069 #if defined CONFIG_X86 && defined CONFIG_DMI 1070 static unsigned char apanel_addr __ro_after_init; 1071 1072 /* Scan the system ROM for the signature "FJKEYINF" */ 1073 static __init const void __iomem *bios_signature(const void __iomem *bios) 1074 { 1075 ssize_t offset; 1076 const unsigned char signature[] = "FJKEYINF"; 1077 1078 for (offset = 0; offset < 0x10000; offset += 0x10) { 1079 if (check_signature(bios + offset, signature, 1080 sizeof(signature)-1)) 1081 return bios + offset; 1082 } 1083 return NULL; 1084 } 1085 1086 static void __init input_apanel_init(void) 1087 { 1088 void __iomem *bios; 1089 const void __iomem *p; 1090 1091 bios = ioremap(0xF0000, 0x10000); /* Can't fail */ 1092 p = bios_signature(bios); 1093 if (p) { 1094 /* just use the first address */ 1095 apanel_addr = readb(p + 8 + 3) >> 1; 1096 } 1097 iounmap(bios); 1098 } 1099 1100 struct dmi_onboard_device_info { 1101 const char *name; 1102 u8 type; 1103 unsigned short i2c_addr; 1104 const char *i2c_type; 1105 }; 1106 1107 static const struct dmi_onboard_device_info dmi_devices[] = { 1108 { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" }, 1109 { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" }, 1110 { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" }, 1111 }; 1112 1113 static void dmi_check_onboard_device(u8 type, const char *name, 1114 struct i2c_adapter *adap) 1115 { 1116 int i; 1117 struct i2c_board_info info; 1118 1119 for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) { 1120 /* & ~0x80, ignore enabled/disabled bit */ 1121 if ((type & ~0x80) != dmi_devices[i].type) 1122 continue; 1123 if (strcasecmp(name, dmi_devices[i].name)) 1124 continue; 1125 1126 memset(&info, 0, sizeof(struct i2c_board_info)); 1127 info.addr = dmi_devices[i].i2c_addr; 1128 strscpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE); 1129 i2c_new_client_device(adap, &info); 1130 break; 1131 } 1132 } 1133 1134 /* We use our own function to check for onboard devices instead of 1135 dmi_find_device() as some buggy BIOS's have the devices we are interested 1136 in marked as disabled */ 1137 static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap) 1138 { 1139 int i, count; 1140 1141 if (dm->type != DMI_ENTRY_ONBOARD_DEVICE) 1142 return; 1143 1144 count = (dm->length - sizeof(struct dmi_header)) / 2; 1145 for (i = 0; i < count; i++) { 1146 const u8 *d = (char *)(dm + 1) + (i * 2); 1147 const char *name = ((char *) dm) + dm->length; 1148 u8 type = d[0]; 1149 u8 s = d[1]; 1150 1151 if (!s) 1152 continue; 1153 s--; 1154 while (s > 0 && name[0]) { 1155 name += strlen(name) + 1; 1156 s--; 1157 } 1158 if (name[0] == 0) /* Bogus string reference */ 1159 continue; 1160 1161 dmi_check_onboard_device(type, name, adap); 1162 } 1163 } 1164 1165 /* NOTE: Keep this list in sync with drivers/platform/x86/dell-smo8800.c */ 1166 static const char *const acpi_smo8800_ids[] = { 1167 "SMO8800", 1168 "SMO8801", 1169 "SMO8810", 1170 "SMO8811", 1171 "SMO8820", 1172 "SMO8821", 1173 "SMO8830", 1174 "SMO8831", 1175 }; 1176 1177 static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle, 1178 u32 nesting_level, 1179 void *context, 1180 void **return_value) 1181 { 1182 struct acpi_device_info *info; 1183 acpi_status status; 1184 char *hid; 1185 int i; 1186 1187 status = acpi_get_object_info(obj_handle, &info); 1188 if (ACPI_FAILURE(status)) 1189 return AE_OK; 1190 1191 if (!(info->valid & ACPI_VALID_HID)) 1192 goto smo88xx_not_found; 1193 1194 hid = info->hardware_id.string; 1195 if (!hid) 1196 goto smo88xx_not_found; 1197 1198 i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid); 1199 if (i < 0) 1200 goto smo88xx_not_found; 1201 1202 kfree(info); 1203 1204 *return_value = NULL; 1205 return AE_CTRL_TERMINATE; 1206 1207 smo88xx_not_found: 1208 kfree(info); 1209 return AE_OK; 1210 } 1211 1212 static bool is_dell_system_with_lis3lv02d(void) 1213 { 1214 void *err = ERR_PTR(-ENOENT); 1215 1216 if (!dmi_match(DMI_SYS_VENDOR, "Dell Inc.")) 1217 return false; 1218 1219 /* 1220 * Check that ACPI device SMO88xx is present and is functioning. 1221 * Function acpi_get_devices() already filters all ACPI devices 1222 * which are not present or are not functioning. 1223 * ACPI device SMO88xx represents our ST microelectronics lis3lv02d 1224 * accelerometer but unfortunately ACPI does not provide any other 1225 * information (like I2C address). 1226 */ 1227 acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, &err); 1228 1229 return !IS_ERR(err); 1230 } 1231 1232 /* 1233 * Accelerometer's I2C address is not specified in DMI nor ACPI, 1234 * so it is needed to define mapping table based on DMI product names. 1235 */ 1236 static const struct { 1237 const char *dmi_product_name; 1238 unsigned short i2c_addr; 1239 } dell_lis3lv02d_devices[] = { 1240 /* 1241 * Dell platform team told us that these Latitude devices have 1242 * ST microelectronics accelerometer at I2C address 0x29. 1243 */ 1244 { "Latitude E5250", 0x29 }, 1245 { "Latitude E5450", 0x29 }, 1246 { "Latitude E5550", 0x29 }, 1247 { "Latitude E6440", 0x29 }, 1248 { "Latitude E6440 ATG", 0x29 }, 1249 { "Latitude E6540", 0x29 }, 1250 /* 1251 * Additional individual entries were added after verification. 1252 */ 1253 { "Latitude 5480", 0x29 }, 1254 { "Precision 3540", 0x29 }, 1255 { "Precision M6800", 0x29 }, 1256 { "Vostro V131", 0x1d }, 1257 { "Vostro 5568", 0x29 }, 1258 { "XPS 15 7590", 0x29 }, 1259 }; 1260 1261 static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv) 1262 { 1263 struct i2c_board_info info; 1264 const char *dmi_product_name; 1265 int i; 1266 1267 dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); 1268 for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) { 1269 if (strcmp(dmi_product_name, 1270 dell_lis3lv02d_devices[i].dmi_product_name) == 0) 1271 break; 1272 } 1273 1274 if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) { 1275 dev_warn(&priv->pci_dev->dev, 1276 "Accelerometer lis3lv02d is present on SMBus but its" 1277 " address is unknown, skipping registration\n"); 1278 return; 1279 } 1280 1281 memset(&info, 0, sizeof(struct i2c_board_info)); 1282 info.addr = dell_lis3lv02d_devices[i].i2c_addr; 1283 strscpy(info.type, "lis3lv02d", I2C_NAME_SIZE); 1284 i2c_new_client_device(&priv->adapter, &info); 1285 } 1286 1287 /* Register optional targets */ 1288 static void i801_probe_optional_targets(struct i801_priv *priv) 1289 { 1290 /* Only register targets on main SMBus channel */ 1291 if (priv->features & FEATURE_IDF) 1292 return; 1293 1294 if (apanel_addr) { 1295 struct i2c_board_info info = { 1296 .addr = apanel_addr, 1297 .type = "fujitsu_apanel", 1298 }; 1299 1300 i2c_new_client_device(&priv->adapter, &info); 1301 } 1302 1303 if (dmi_name_in_vendors("FUJITSU")) 1304 dmi_walk(dmi_check_onboard_devices, &priv->adapter); 1305 1306 if (is_dell_system_with_lis3lv02d()) 1307 register_dell_lis3lv02d_i2c_device(priv); 1308 1309 /* Instantiate SPD EEPROMs unless the SMBus is multiplexed */ 1310 #ifdef CONFIG_I2C_I801_MUX 1311 if (!priv->mux_pdev) 1312 #endif 1313 i2c_register_spd(&priv->adapter); 1314 } 1315 #else 1316 static void __init input_apanel_init(void) {} 1317 static void i801_probe_optional_targets(struct i801_priv *priv) {} 1318 #endif /* CONFIG_X86 && CONFIG_DMI */ 1319 1320 #ifdef CONFIG_I2C_I801_MUX 1321 static struct i801_mux_config i801_mux_config_asus_z8_d12 = { 1322 .gpio_chip = "gpio_ich", 1323 .values = { 0x02, 0x03 }, 1324 .n_values = 2, 1325 .gpios = { 52, 53 }, 1326 .n_gpios = 2, 1327 }; 1328 1329 static struct i801_mux_config i801_mux_config_asus_z8_d18 = { 1330 .gpio_chip = "gpio_ich", 1331 .values = { 0x02, 0x03, 0x01 }, 1332 .n_values = 3, 1333 .gpios = { 52, 53 }, 1334 .n_gpios = 2, 1335 }; 1336 1337 static const struct dmi_system_id mux_dmi_table[] = { 1338 { 1339 .matches = { 1340 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1341 DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"), 1342 }, 1343 .driver_data = &i801_mux_config_asus_z8_d12, 1344 }, 1345 { 1346 .matches = { 1347 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1348 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"), 1349 }, 1350 .driver_data = &i801_mux_config_asus_z8_d12, 1351 }, 1352 { 1353 .matches = { 1354 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1355 DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"), 1356 }, 1357 .driver_data = &i801_mux_config_asus_z8_d12, 1358 }, 1359 { 1360 .matches = { 1361 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1362 DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"), 1363 }, 1364 .driver_data = &i801_mux_config_asus_z8_d12, 1365 }, 1366 { 1367 .matches = { 1368 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1369 DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"), 1370 }, 1371 .driver_data = &i801_mux_config_asus_z8_d12, 1372 }, 1373 { 1374 .matches = { 1375 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1376 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"), 1377 }, 1378 .driver_data = &i801_mux_config_asus_z8_d12, 1379 }, 1380 { 1381 .matches = { 1382 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1383 DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"), 1384 }, 1385 .driver_data = &i801_mux_config_asus_z8_d18, 1386 }, 1387 { 1388 .matches = { 1389 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1390 DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"), 1391 }, 1392 .driver_data = &i801_mux_config_asus_z8_d18, 1393 }, 1394 { 1395 .matches = { 1396 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1397 DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"), 1398 }, 1399 .driver_data = &i801_mux_config_asus_z8_d12, 1400 }, 1401 { } 1402 }; 1403 1404 static int i801_notifier_call(struct notifier_block *nb, unsigned long action, 1405 void *data) 1406 { 1407 struct i801_priv *priv = container_of(nb, struct i801_priv, mux_notifier_block); 1408 struct device *dev = data; 1409 1410 if (action != BUS_NOTIFY_ADD_DEVICE || 1411 dev->type != &i2c_adapter_type || 1412 i2c_root_adapter(dev) != &priv->adapter) 1413 return NOTIFY_DONE; 1414 1415 /* Call i2c_register_spd for muxed child segments */ 1416 i2c_register_spd(to_i2c_adapter(dev)); 1417 1418 return NOTIFY_OK; 1419 } 1420 1421 /* Setup multiplexing if needed */ 1422 static void i801_add_mux(struct i801_priv *priv) 1423 { 1424 struct device *dev = &priv->adapter.dev; 1425 const struct i801_mux_config *mux_config; 1426 struct i2c_mux_gpio_platform_data gpio_data; 1427 struct gpiod_lookup_table *lookup; 1428 const struct dmi_system_id *id; 1429 int i; 1430 1431 id = dmi_first_match(mux_dmi_table); 1432 if (!id) 1433 return; 1434 1435 mux_config = id->driver_data; 1436 1437 /* Prepare the platform data */ 1438 memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data)); 1439 gpio_data.parent = priv->adapter.nr; 1440 gpio_data.values = mux_config->values; 1441 gpio_data.n_values = mux_config->n_values; 1442 gpio_data.idle = I2C_MUX_GPIO_NO_IDLE; 1443 1444 /* Register GPIO descriptor lookup table */ 1445 lookup = devm_kzalloc(dev, 1446 struct_size(lookup, table, mux_config->n_gpios + 1), 1447 GFP_KERNEL); 1448 if (!lookup) 1449 return; 1450 lookup->dev_id = "i2c-mux-gpio"; 1451 for (i = 0; i < mux_config->n_gpios; i++) 1452 lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip, 1453 mux_config->gpios[i], "mux", 0); 1454 gpiod_add_lookup_table(lookup); 1455 1456 priv->mux_notifier_block.notifier_call = i801_notifier_call; 1457 if (bus_register_notifier(&i2c_bus_type, &priv->mux_notifier_block)) 1458 return; 1459 /* 1460 * Register the mux device, we use PLATFORM_DEVID_NONE here 1461 * because since we are referring to the GPIO chip by name we are 1462 * anyways in deep trouble if there is more than one of these 1463 * devices, and there should likely only be one platform controller 1464 * hub. 1465 */ 1466 priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio", 1467 PLATFORM_DEVID_NONE, &gpio_data, 1468 sizeof(struct i2c_mux_gpio_platform_data)); 1469 if (IS_ERR(priv->mux_pdev)) { 1470 gpiod_remove_lookup_table(lookup); 1471 devm_kfree(dev, lookup); 1472 dev_err(dev, "Failed to register i2c-mux-gpio device\n"); 1473 } else { 1474 priv->lookup = lookup; 1475 } 1476 } 1477 1478 static void i801_del_mux(struct i801_priv *priv) 1479 { 1480 bus_unregister_notifier(&i2c_bus_type, &priv->mux_notifier_block); 1481 platform_device_unregister(priv->mux_pdev); 1482 gpiod_remove_lookup_table(priv->lookup); 1483 } 1484 #else 1485 static inline void i801_add_mux(struct i801_priv *priv) { } 1486 static inline void i801_del_mux(struct i801_priv *priv) { } 1487 #endif 1488 1489 static struct platform_device * 1490 i801_add_tco_spt(struct pci_dev *pci_dev, struct resource *tco_res) 1491 { 1492 static const struct itco_wdt_platform_data pldata = { 1493 .name = "Intel PCH", 1494 .version = 4, 1495 }; 1496 struct resource *res; 1497 int ret; 1498 1499 /* 1500 * We must access the NO_REBOOT bit over the Primary to Sideband 1501 * (P2SB) bridge. 1502 */ 1503 1504 res = &tco_res[1]; 1505 ret = p2sb_bar(pci_dev->bus, 0, res); 1506 if (ret) 1507 return ERR_PTR(ret); 1508 1509 if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS) 1510 res->start += SBREG_SMBCTRL_DNV; 1511 else 1512 res->start += SBREG_SMBCTRL; 1513 1514 res->end = res->start + 3; 1515 1516 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, 1517 tco_res, 2, &pldata, sizeof(pldata)); 1518 } 1519 1520 static struct platform_device * 1521 i801_add_tco_cnl(struct pci_dev *pci_dev, struct resource *tco_res) 1522 { 1523 static const struct itco_wdt_platform_data pldata = { 1524 .name = "Intel PCH", 1525 .version = 6, 1526 }; 1527 1528 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, 1529 tco_res, 1, &pldata, sizeof(pldata)); 1530 } 1531 1532 static void i801_add_tco(struct i801_priv *priv) 1533 { 1534 struct pci_dev *pci_dev = priv->pci_dev; 1535 struct resource tco_res[2], *res; 1536 u32 tco_base, tco_ctl; 1537 1538 /* If we have ACPI based watchdog use that instead */ 1539 if (acpi_has_watchdog()) 1540 return; 1541 1542 if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL))) 1543 return; 1544 1545 pci_read_config_dword(pci_dev, TCOBASE, &tco_base); 1546 pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl); 1547 if (!(tco_ctl & TCOCTL_EN)) 1548 return; 1549 1550 memset(tco_res, 0, sizeof(tco_res)); 1551 /* 1552 * Always populate the main iTCO IO resource here. The second entry 1553 * for NO_REBOOT MMIO is filled by the SPT specific function. 1554 */ 1555 res = &tco_res[0]; 1556 res->start = tco_base & ~1; 1557 res->end = res->start + 32 - 1; 1558 res->flags = IORESOURCE_IO; 1559 1560 if (priv->features & FEATURE_TCO_CNL) 1561 priv->tco_pdev = i801_add_tco_cnl(pci_dev, tco_res); 1562 else 1563 priv->tco_pdev = i801_add_tco_spt(pci_dev, tco_res); 1564 1565 if (IS_ERR(priv->tco_pdev)) 1566 dev_warn(&pci_dev->dev, "failed to create iTCO device\n"); 1567 } 1568 1569 #ifdef CONFIG_ACPI 1570 static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv, 1571 acpi_physical_address address) 1572 { 1573 return address >= priv->smba && 1574 address <= pci_resource_end(priv->pci_dev, SMBBAR); 1575 } 1576 1577 static acpi_status 1578 i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, 1579 u64 *value, void *handler_context, void *region_context) 1580 { 1581 struct i801_priv *priv = handler_context; 1582 struct pci_dev *pdev = priv->pci_dev; 1583 acpi_status status; 1584 1585 /* 1586 * Once BIOS AML code touches the OpRegion we warn and inhibit any 1587 * further access from the driver itself. This device is now owned 1588 * by the system firmware. 1589 */ 1590 i2c_lock_bus(&priv->adapter, I2C_LOCK_SEGMENT); 1591 1592 if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) { 1593 priv->acpi_reserved = true; 1594 1595 dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n"); 1596 dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n"); 1597 1598 /* 1599 * BIOS is accessing the host controller so prevent it from 1600 * suspending automatically from now on. 1601 */ 1602 pm_runtime_get_sync(&pdev->dev); 1603 } 1604 1605 if ((function & ACPI_IO_MASK) == ACPI_READ) 1606 status = acpi_os_read_port(address, (u32 *)value, bits); 1607 else 1608 status = acpi_os_write_port(address, (u32)*value, bits); 1609 1610 i2c_unlock_bus(&priv->adapter, I2C_LOCK_SEGMENT); 1611 1612 return status; 1613 } 1614 1615 static int i801_acpi_probe(struct i801_priv *priv) 1616 { 1617 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev); 1618 acpi_status status; 1619 1620 status = acpi_install_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, 1621 i801_acpi_io_handler, NULL, priv); 1622 if (ACPI_SUCCESS(status)) 1623 return 0; 1624 1625 return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]); 1626 } 1627 1628 static void i801_acpi_remove(struct i801_priv *priv) 1629 { 1630 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev); 1631 1632 acpi_remove_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler); 1633 } 1634 #else 1635 static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; } 1636 static inline void i801_acpi_remove(struct i801_priv *priv) { } 1637 #endif 1638 1639 static void i801_setup_hstcfg(struct i801_priv *priv) 1640 { 1641 unsigned char hstcfg = priv->original_hstcfg; 1642 1643 hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ 1644 hstcfg |= SMBHSTCFG_HST_EN; 1645 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg); 1646 } 1647 1648 static void i801_restore_regs(struct i801_priv *priv) 1649 { 1650 outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); 1651 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg); 1652 } 1653 1654 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) 1655 { 1656 int err, i; 1657 struct i801_priv *priv; 1658 1659 priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL); 1660 if (!priv) 1661 return -ENOMEM; 1662 1663 i2c_set_adapdata(&priv->adapter, priv); 1664 priv->adapter.owner = THIS_MODULE; 1665 priv->adapter.class = I2C_CLASS_HWMON; 1666 priv->adapter.algo = &smbus_algorithm; 1667 priv->adapter.dev.parent = &dev->dev; 1668 acpi_use_parent_companion(&priv->adapter.dev); 1669 priv->adapter.retries = 3; 1670 1671 priv->pci_dev = dev; 1672 priv->features = id->driver_data; 1673 1674 /* Disable features on user request */ 1675 for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { 1676 if (priv->features & disable_features & (1 << i)) 1677 dev_notice(&dev->dev, "%s disabled by user\n", 1678 i801_feature_names[i]); 1679 } 1680 priv->features &= ~disable_features; 1681 1682 /* The block process call uses block buffer mode */ 1683 if (!(priv->features & FEATURE_BLOCK_BUFFER)) 1684 priv->features &= ~FEATURE_BLOCK_PROC; 1685 1686 /* 1687 * Do not call pcim_enable_device(), because the device has to remain 1688 * enabled on driver detach. See i801_remove() for the reasoning. 1689 */ 1690 err = pci_enable_device(dev); 1691 if (err) { 1692 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n", 1693 err); 1694 return err; 1695 } 1696 1697 /* Determine the address of the SMBus area */ 1698 priv->smba = pci_resource_start(dev, SMBBAR); 1699 if (!priv->smba) { 1700 dev_err(&dev->dev, 1701 "SMBus base address uninitialized, upgrade BIOS\n"); 1702 return -ENODEV; 1703 } 1704 1705 if (i801_acpi_probe(priv)) 1706 return -ENODEV; 1707 1708 err = pcim_iomap_regions(dev, 1 << SMBBAR, DRV_NAME); 1709 if (err) { 1710 dev_err(&dev->dev, 1711 "Failed to request SMBus region 0x%lx-0x%Lx\n", 1712 priv->smba, 1713 (unsigned long long)pci_resource_end(dev, SMBBAR)); 1714 i801_acpi_remove(priv); 1715 return err; 1716 } 1717 1718 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg); 1719 i801_setup_hstcfg(priv); 1720 if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN)) 1721 dev_info(&dev->dev, "Enabling SMBus device\n"); 1722 1723 if (priv->original_hstcfg & SMBHSTCFG_SMB_SMI_EN) { 1724 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); 1725 /* Disable SMBus interrupt feature if SMBus using SMI# */ 1726 priv->features &= ~FEATURE_IRQ; 1727 } 1728 if (priv->original_hstcfg & SMBHSTCFG_SPD_WD) 1729 dev_info(&dev->dev, "SPD Write Disable is set\n"); 1730 1731 /* Clear special mode bits */ 1732 if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) 1733 outb_p(inb_p(SMBAUXCTL(priv)) & 1734 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 1735 1736 /* Default timeout in interrupt mode: 200 ms */ 1737 priv->adapter.timeout = HZ / 5; 1738 1739 if (dev->irq == IRQ_NOTCONNECTED) 1740 priv->features &= ~FEATURE_IRQ; 1741 1742 if (priv->features & FEATURE_IRQ) { 1743 u16 pcists; 1744 1745 /* Complain if an interrupt is already pending */ 1746 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists); 1747 if (pcists & PCI_STATUS_INTERRUPT) 1748 dev_warn(&dev->dev, "An interrupt is pending!\n"); 1749 } 1750 1751 if (priv->features & FEATURE_IRQ) { 1752 init_completion(&priv->done); 1753 1754 err = devm_request_irq(&dev->dev, dev->irq, i801_isr, 1755 IRQF_SHARED, DRV_NAME, priv); 1756 if (err) { 1757 dev_err(&dev->dev, "Failed to allocate irq %d: %d\n", 1758 dev->irq, err); 1759 priv->features &= ~FEATURE_IRQ; 1760 } 1761 } 1762 dev_info(&dev->dev, "SMBus using %s\n", 1763 priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling"); 1764 1765 /* Host notification uses an interrupt */ 1766 if (!(priv->features & FEATURE_IRQ)) 1767 priv->features &= ~FEATURE_HOST_NOTIFY; 1768 1769 /* Remember original Interrupt and Host Notify settings */ 1770 priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL; 1771 if (priv->features & FEATURE_HOST_NOTIFY) 1772 priv->original_slvcmd = inb_p(SMBSLVCMD(priv)); 1773 1774 i801_add_tco(priv); 1775 1776 /* 1777 * adapter.name is used by platform code to find the main I801 adapter 1778 * to instantiante i2c_clients, do not change. 1779 */ 1780 snprintf(priv->adapter.name, sizeof(priv->adapter.name), 1781 "SMBus %s adapter at %04lx", 1782 (priv->features & FEATURE_IDF) ? "I801 IDF" : "I801", 1783 priv->smba); 1784 1785 err = i2c_add_adapter(&priv->adapter); 1786 if (err) { 1787 platform_device_unregister(priv->tco_pdev); 1788 i801_acpi_remove(priv); 1789 i801_restore_regs(priv); 1790 return err; 1791 } 1792 1793 i801_enable_host_notify(&priv->adapter); 1794 1795 /* We ignore errors - multiplexing is optional */ 1796 i801_add_mux(priv); 1797 i801_probe_optional_targets(priv); 1798 1799 pci_set_drvdata(dev, priv); 1800 1801 dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE); 1802 pm_runtime_set_autosuspend_delay(&dev->dev, 1000); 1803 pm_runtime_use_autosuspend(&dev->dev); 1804 pm_runtime_put_autosuspend(&dev->dev); 1805 pm_runtime_allow(&dev->dev); 1806 1807 return 0; 1808 } 1809 1810 static void i801_remove(struct pci_dev *dev) 1811 { 1812 struct i801_priv *priv = pci_get_drvdata(dev); 1813 1814 i801_disable_host_notify(priv); 1815 i801_del_mux(priv); 1816 i2c_del_adapter(&priv->adapter); 1817 i801_acpi_remove(priv); 1818 1819 platform_device_unregister(priv->tco_pdev); 1820 1821 /* if acpi_reserved is set then usage_count is incremented already */ 1822 if (!priv->acpi_reserved) 1823 pm_runtime_get_noresume(&dev->dev); 1824 1825 i801_restore_regs(priv); 1826 1827 /* 1828 * do not call pci_disable_device(dev) since it can cause hard hangs on 1829 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) 1830 */ 1831 } 1832 1833 static void i801_shutdown(struct pci_dev *dev) 1834 { 1835 struct i801_priv *priv = pci_get_drvdata(dev); 1836 1837 i801_disable_host_notify(priv); 1838 /* Restore config registers to avoid hard hang on some systems */ 1839 i801_restore_regs(priv); 1840 } 1841 1842 static int i801_suspend(struct device *dev) 1843 { 1844 struct i801_priv *priv = dev_get_drvdata(dev); 1845 1846 i2c_mark_adapter_suspended(&priv->adapter); 1847 i801_restore_regs(priv); 1848 1849 return 0; 1850 } 1851 1852 static int i801_resume(struct device *dev) 1853 { 1854 struct i801_priv *priv = dev_get_drvdata(dev); 1855 1856 i801_setup_hstcfg(priv); 1857 i801_enable_host_notify(&priv->adapter); 1858 i2c_mark_adapter_resumed(&priv->adapter); 1859 1860 return 0; 1861 } 1862 1863 static DEFINE_SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume); 1864 1865 static struct pci_driver i801_driver = { 1866 .name = DRV_NAME, 1867 .id_table = i801_ids, 1868 .probe = i801_probe, 1869 .remove = i801_remove, 1870 .shutdown = i801_shutdown, 1871 .driver = { 1872 .pm = pm_sleep_ptr(&i801_pm_ops), 1873 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 1874 }, 1875 }; 1876 1877 static int __init i2c_i801_init(struct pci_driver *drv) 1878 { 1879 if (dmi_name_in_vendors("FUJITSU")) 1880 input_apanel_init(); 1881 return pci_register_driver(drv); 1882 } 1883 1884 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); 1885 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); 1886 MODULE_DESCRIPTION("I801 SMBus driver"); 1887 MODULE_LICENSE("GPL"); 1888 1889 module_driver(i801_driver, i2c_i801_init, pci_unregister_driver); 1890