1 /* 2 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, 3 Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker 4 <mdsxyz123@yahoo.com> 5 Copyright (C) 2007 - 2012 Jean Delvare <khali@linux-fr.org> 6 Copyright (C) 2010 Intel Corporation, 7 David Woodhouse <dwmw2@infradead.org> 8 9 This program is free software; you can redistribute it and/or modify 10 it under the terms of the GNU General Public License as published by 11 the Free Software Foundation; either version 2 of the License, or 12 (at your option) any later version. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 24 /* 25 Supports the following Intel I/O Controller Hubs (ICH): 26 27 I/O Block I2C 28 region SMBus Block proc. block 29 Chip name PCI ID size PEC buffer call read 30 ---------------------------------------------------------------------- 31 82801AA (ICH) 0x2413 16 no no no no 32 82801AB (ICH0) 0x2423 16 no no no no 33 82801BA (ICH2) 0x2443 16 no no no no 34 82801CA (ICH3) 0x2483 32 soft no no no 35 82801DB (ICH4) 0x24c3 32 hard yes no no 36 82801E (ICH5) 0x24d3 32 hard yes yes yes 37 6300ESB 0x25a4 32 hard yes yes yes 38 82801F (ICH6) 0x266a 32 hard yes yes yes 39 6310ESB/6320ESB 0x269b 32 hard yes yes yes 40 82801G (ICH7) 0x27da 32 hard yes yes yes 41 82801H (ICH8) 0x283e 32 hard yes yes yes 42 82801I (ICH9) 0x2930 32 hard yes yes yes 43 EP80579 (Tolapai) 0x5032 32 hard yes yes yes 44 ICH10 0x3a30 32 hard yes yes yes 45 ICH10 0x3a60 32 hard yes yes yes 46 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes 47 6 Series (PCH) 0x1c22 32 hard yes yes yes 48 Patsburg (PCH) 0x1d22 32 hard yes yes yes 49 Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes 50 Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes 51 Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes 52 DH89xxCC (PCH) 0x2330 32 hard yes yes yes 53 Panther Point (PCH) 0x1e22 32 hard yes yes yes 54 Lynx Point (PCH) 0x8c22 32 hard yes yes yes 55 Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes 56 57 Features supported by this driver: 58 Software PEC no 59 Hardware PEC yes 60 Block buffer yes 61 Block process call transaction no 62 I2C block read transaction yes (doesn't use the block buffer) 63 Slave mode no 64 Interrupt processing yes 65 66 See the file Documentation/i2c/busses/i2c-i801 for details. 67 */ 68 69 #include <linux/interrupt.h> 70 #include <linux/module.h> 71 #include <linux/pci.h> 72 #include <linux/kernel.h> 73 #include <linux/stddef.h> 74 #include <linux/delay.h> 75 #include <linux/ioport.h> 76 #include <linux/init.h> 77 #include <linux/i2c.h> 78 #include <linux/acpi.h> 79 #include <linux/io.h> 80 #include <linux/dmi.h> 81 #include <linux/slab.h> 82 #include <linux/wait.h> 83 #include <linux/err.h> 84 #include <linux/of_i2c.h> 85 86 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ 87 defined CONFIG_DMI 88 #include <linux/gpio.h> 89 #include <linux/i2c-mux-gpio.h> 90 #include <linux/platform_device.h> 91 #endif 92 93 /* I801 SMBus address offsets */ 94 #define SMBHSTSTS(p) (0 + (p)->smba) 95 #define SMBHSTCNT(p) (2 + (p)->smba) 96 #define SMBHSTCMD(p) (3 + (p)->smba) 97 #define SMBHSTADD(p) (4 + (p)->smba) 98 #define SMBHSTDAT0(p) (5 + (p)->smba) 99 #define SMBHSTDAT1(p) (6 + (p)->smba) 100 #define SMBBLKDAT(p) (7 + (p)->smba) 101 #define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */ 102 #define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */ 103 #define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */ 104 105 /* PCI Address Constants */ 106 #define SMBBAR 4 107 #define SMBPCISTS 0x006 108 #define SMBHSTCFG 0x040 109 110 /* Host status bits for SMBPCISTS */ 111 #define SMBPCISTS_INTS 0x08 112 113 /* Host configuration bits for SMBHSTCFG */ 114 #define SMBHSTCFG_HST_EN 1 115 #define SMBHSTCFG_SMB_SMI_EN 2 116 #define SMBHSTCFG_I2C_EN 4 117 118 /* Auxiliary control register bits, ICH4+ only */ 119 #define SMBAUXCTL_CRC 1 120 #define SMBAUXCTL_E32B 2 121 122 /* Other settings */ 123 #define MAX_RETRIES 400 124 125 /* I801 command constants */ 126 #define I801_QUICK 0x00 127 #define I801_BYTE 0x04 128 #define I801_BYTE_DATA 0x08 129 #define I801_WORD_DATA 0x0C 130 #define I801_PROC_CALL 0x10 /* unimplemented */ 131 #define I801_BLOCK_DATA 0x14 132 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ 133 134 /* I801 Host Control register bits */ 135 #define SMBHSTCNT_INTREN 0x01 136 #define SMBHSTCNT_KILL 0x02 137 #define SMBHSTCNT_LAST_BYTE 0x20 138 #define SMBHSTCNT_START 0x40 139 #define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */ 140 141 /* I801 Hosts Status register bits */ 142 #define SMBHSTSTS_BYTE_DONE 0x80 143 #define SMBHSTSTS_INUSE_STS 0x40 144 #define SMBHSTSTS_SMBALERT_STS 0x20 145 #define SMBHSTSTS_FAILED 0x10 146 #define SMBHSTSTS_BUS_ERR 0x08 147 #define SMBHSTSTS_DEV_ERR 0x04 148 #define SMBHSTSTS_INTR 0x02 149 #define SMBHSTSTS_HOST_BUSY 0x01 150 151 #define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ 152 SMBHSTSTS_DEV_ERR) 153 154 #define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \ 155 STATUS_ERROR_FLAGS) 156 157 /* Older devices have their ID defined in <linux/pci_ids.h> */ 158 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 159 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 160 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ 161 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 162 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 163 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 164 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 165 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 166 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 167 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 168 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 169 170 struct i801_mux_config { 171 char *gpio_chip; 172 unsigned values[3]; 173 int n_values; 174 unsigned classes[3]; 175 unsigned gpios[2]; /* Relative to gpio_chip->base */ 176 int n_gpios; 177 }; 178 179 struct i801_priv { 180 struct i2c_adapter adapter; 181 unsigned long smba; 182 unsigned char original_hstcfg; 183 struct pci_dev *pci_dev; 184 unsigned int features; 185 186 /* isr processing */ 187 wait_queue_head_t waitq; 188 u8 status; 189 190 /* Command state used by isr for byte-by-byte block transactions */ 191 u8 cmd; 192 bool is_read; 193 int count; 194 int len; 195 u8 *data; 196 197 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ 198 defined CONFIG_DMI 199 const struct i801_mux_config *mux_drvdata; 200 struct platform_device *mux_pdev; 201 #endif 202 }; 203 204 static struct pci_driver i801_driver; 205 206 #define FEATURE_SMBUS_PEC (1 << 0) 207 #define FEATURE_BLOCK_BUFFER (1 << 1) 208 #define FEATURE_BLOCK_PROC (1 << 2) 209 #define FEATURE_I2C_BLOCK_READ (1 << 3) 210 #define FEATURE_IRQ (1 << 4) 211 /* Not really a feature, but it's convenient to handle it as such */ 212 #define FEATURE_IDF (1 << 15) 213 214 static const char *i801_feature_names[] = { 215 "SMBus PEC", 216 "Block buffer", 217 "Block process call", 218 "I2C block read", 219 "Interrupt", 220 }; 221 222 static unsigned int disable_features; 223 module_param(disable_features, uint, S_IRUGO | S_IWUSR); 224 MODULE_PARM_DESC(disable_features, "Disable selected driver features"); 225 226 /* Make sure the SMBus host is ready to start transmitting. 227 Return 0 if it is, -EBUSY if it is not. */ 228 static int i801_check_pre(struct i801_priv *priv) 229 { 230 int status; 231 232 status = inb_p(SMBHSTSTS(priv)); 233 if (status & SMBHSTSTS_HOST_BUSY) { 234 dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n"); 235 return -EBUSY; 236 } 237 238 status &= STATUS_FLAGS; 239 if (status) { 240 dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n", 241 status); 242 outb_p(status, SMBHSTSTS(priv)); 243 status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS; 244 if (status) { 245 dev_err(&priv->pci_dev->dev, 246 "Failed clearing status flags (%02x)\n", 247 status); 248 return -EBUSY; 249 } 250 } 251 252 return 0; 253 } 254 255 /* 256 * Convert the status register to an error code, and clear it. 257 * Note that status only contains the bits we want to clear, not the 258 * actual register value. 259 */ 260 static int i801_check_post(struct i801_priv *priv, int status) 261 { 262 int result = 0; 263 264 /* 265 * If the SMBus is still busy, we give up 266 * Note: This timeout condition only happens when using polling 267 * transactions. For interrupt operation, NAK/timeout is indicated by 268 * DEV_ERR. 269 */ 270 if (unlikely(status < 0)) { 271 dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); 272 /* try to stop the current command */ 273 dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); 274 outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, 275 SMBHSTCNT(priv)); 276 usleep_range(1000, 2000); 277 outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), 278 SMBHSTCNT(priv)); 279 280 /* Check if it worked */ 281 status = inb_p(SMBHSTSTS(priv)); 282 if ((status & SMBHSTSTS_HOST_BUSY) || 283 !(status & SMBHSTSTS_FAILED)) 284 dev_err(&priv->pci_dev->dev, 285 "Failed terminating the transaction\n"); 286 outb_p(STATUS_FLAGS, SMBHSTSTS(priv)); 287 return -ETIMEDOUT; 288 } 289 290 if (status & SMBHSTSTS_FAILED) { 291 result = -EIO; 292 dev_err(&priv->pci_dev->dev, "Transaction failed\n"); 293 } 294 if (status & SMBHSTSTS_DEV_ERR) { 295 result = -ENXIO; 296 dev_dbg(&priv->pci_dev->dev, "No response\n"); 297 } 298 if (status & SMBHSTSTS_BUS_ERR) { 299 result = -EAGAIN; 300 dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); 301 } 302 303 /* Clear status flags except BYTE_DONE, to be cleared by caller */ 304 outb_p(status, SMBHSTSTS(priv)); 305 306 return result; 307 } 308 309 /* Wait for BUSY being cleared and either INTR or an error flag being set */ 310 static int i801_wait_intr(struct i801_priv *priv) 311 { 312 int timeout = 0; 313 int status; 314 315 /* We will always wait for a fraction of a second! */ 316 do { 317 usleep_range(250, 500); 318 status = inb_p(SMBHSTSTS(priv)); 319 } while (((status & SMBHSTSTS_HOST_BUSY) || 320 !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) && 321 (timeout++ < MAX_RETRIES)); 322 323 if (timeout > MAX_RETRIES) { 324 dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n"); 325 return -ETIMEDOUT; 326 } 327 return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR); 328 } 329 330 /* Wait for either BYTE_DONE or an error flag being set */ 331 static int i801_wait_byte_done(struct i801_priv *priv) 332 { 333 int timeout = 0; 334 int status; 335 336 /* We will always wait for a fraction of a second! */ 337 do { 338 usleep_range(250, 500); 339 status = inb_p(SMBHSTSTS(priv)); 340 } while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) && 341 (timeout++ < MAX_RETRIES)); 342 343 if (timeout > MAX_RETRIES) { 344 dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n"); 345 return -ETIMEDOUT; 346 } 347 return status & STATUS_ERROR_FLAGS; 348 } 349 350 static int i801_transaction(struct i801_priv *priv, int xact) 351 { 352 int status; 353 int result; 354 355 result = i801_check_pre(priv); 356 if (result < 0) 357 return result; 358 359 if (priv->features & FEATURE_IRQ) { 360 outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START, 361 SMBHSTCNT(priv)); 362 wait_event(priv->waitq, (status = priv->status)); 363 priv->status = 0; 364 return i801_check_post(priv, status); 365 } 366 367 /* the current contents of SMBHSTCNT can be overwritten, since PEC, 368 * SMBSCMD are passed in xact */ 369 outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); 370 371 status = i801_wait_intr(priv); 372 return i801_check_post(priv, status); 373 } 374 375 static int i801_block_transaction_by_block(struct i801_priv *priv, 376 union i2c_smbus_data *data, 377 char read_write, int hwpec) 378 { 379 int i, len; 380 int status; 381 382 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ 383 384 /* Use 32-byte buffer to process this transaction */ 385 if (read_write == I2C_SMBUS_WRITE) { 386 len = data->block[0]; 387 outb_p(len, SMBHSTDAT0(priv)); 388 for (i = 0; i < len; i++) 389 outb_p(data->block[i+1], SMBBLKDAT(priv)); 390 } 391 392 status = i801_transaction(priv, I801_BLOCK_DATA | 393 (hwpec ? SMBHSTCNT_PEC_EN : 0)); 394 if (status) 395 return status; 396 397 if (read_write == I2C_SMBUS_READ) { 398 len = inb_p(SMBHSTDAT0(priv)); 399 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) 400 return -EPROTO; 401 402 data->block[0] = len; 403 for (i = 0; i < len; i++) 404 data->block[i + 1] = inb_p(SMBBLKDAT(priv)); 405 } 406 return 0; 407 } 408 409 static void i801_isr_byte_done(struct i801_priv *priv) 410 { 411 if (priv->is_read) { 412 /* For SMBus block reads, length is received with first byte */ 413 if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) && 414 (priv->count == 0)) { 415 priv->len = inb_p(SMBHSTDAT0(priv)); 416 if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) { 417 dev_err(&priv->pci_dev->dev, 418 "Illegal SMBus block read size %d\n", 419 priv->len); 420 /* FIXME: Recover */ 421 priv->len = I2C_SMBUS_BLOCK_MAX; 422 } else { 423 dev_dbg(&priv->pci_dev->dev, 424 "SMBus block read size is %d\n", 425 priv->len); 426 } 427 priv->data[-1] = priv->len; 428 } 429 430 /* Read next byte */ 431 if (priv->count < priv->len) 432 priv->data[priv->count++] = inb(SMBBLKDAT(priv)); 433 else 434 dev_dbg(&priv->pci_dev->dev, 435 "Discarding extra byte on block read\n"); 436 437 /* Set LAST_BYTE for last byte of read transaction */ 438 if (priv->count == priv->len - 1) 439 outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE, 440 SMBHSTCNT(priv)); 441 } else if (priv->count < priv->len - 1) { 442 /* Write next byte, except for IRQ after last byte */ 443 outb_p(priv->data[++priv->count], SMBBLKDAT(priv)); 444 } 445 446 /* Clear BYTE_DONE to continue with next byte */ 447 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); 448 } 449 450 /* 451 * There are two kinds of interrupts: 452 * 453 * 1) i801 signals transaction completion with one of these interrupts: 454 * INTR - Success 455 * DEV_ERR - Invalid command, NAK or communication timeout 456 * BUS_ERR - SMI# transaction collision 457 * FAILED - transaction was canceled due to a KILL request 458 * When any of these occur, update ->status and wake up the waitq. 459 * ->status must be cleared before kicking off the next transaction. 460 * 461 * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt 462 * occurs for each byte of a byte-by-byte to prepare the next byte. 463 */ 464 static irqreturn_t i801_isr(int irq, void *dev_id) 465 { 466 struct i801_priv *priv = dev_id; 467 u16 pcists; 468 u8 status; 469 470 /* Confirm this is our interrupt */ 471 pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists); 472 if (!(pcists & SMBPCISTS_INTS)) 473 return IRQ_NONE; 474 475 status = inb_p(SMBHSTSTS(priv)); 476 if (status != 0x42) 477 dev_dbg(&priv->pci_dev->dev, "irq: status = %02x\n", status); 478 479 if (status & SMBHSTSTS_BYTE_DONE) 480 i801_isr_byte_done(priv); 481 482 /* 483 * Clear irq sources and report transaction result. 484 * ->status must be cleared before the next transaction is started. 485 */ 486 status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS; 487 if (status) { 488 outb_p(status, SMBHSTSTS(priv)); 489 priv->status |= status; 490 wake_up(&priv->waitq); 491 } 492 493 return IRQ_HANDLED; 494 } 495 496 /* 497 * For "byte-by-byte" block transactions: 498 * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1 499 * I2C read uses cmd=I801_I2C_BLOCK_DATA 500 */ 501 static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, 502 union i2c_smbus_data *data, 503 char read_write, int command, 504 int hwpec) 505 { 506 int i, len; 507 int smbcmd; 508 int status; 509 int result; 510 511 result = i801_check_pre(priv); 512 if (result < 0) 513 return result; 514 515 len = data->block[0]; 516 517 if (read_write == I2C_SMBUS_WRITE) { 518 outb_p(len, SMBHSTDAT0(priv)); 519 outb_p(data->block[1], SMBBLKDAT(priv)); 520 } 521 522 if (command == I2C_SMBUS_I2C_BLOCK_DATA && 523 read_write == I2C_SMBUS_READ) 524 smbcmd = I801_I2C_BLOCK_DATA; 525 else 526 smbcmd = I801_BLOCK_DATA; 527 528 if (priv->features & FEATURE_IRQ) { 529 priv->is_read = (read_write == I2C_SMBUS_READ); 530 if (len == 1 && priv->is_read) 531 smbcmd |= SMBHSTCNT_LAST_BYTE; 532 priv->cmd = smbcmd | SMBHSTCNT_INTREN; 533 priv->len = len; 534 priv->count = 0; 535 priv->data = &data->block[1]; 536 537 outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv)); 538 wait_event(priv->waitq, (status = priv->status)); 539 priv->status = 0; 540 return i801_check_post(priv, status); 541 } 542 543 for (i = 1; i <= len; i++) { 544 if (i == len && read_write == I2C_SMBUS_READ) 545 smbcmd |= SMBHSTCNT_LAST_BYTE; 546 outb_p(smbcmd, SMBHSTCNT(priv)); 547 548 if (i == 1) 549 outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START, 550 SMBHSTCNT(priv)); 551 552 status = i801_wait_byte_done(priv); 553 if (status) 554 goto exit; 555 556 if (i == 1 && read_write == I2C_SMBUS_READ 557 && command != I2C_SMBUS_I2C_BLOCK_DATA) { 558 len = inb_p(SMBHSTDAT0(priv)); 559 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { 560 dev_err(&priv->pci_dev->dev, 561 "Illegal SMBus block read size %d\n", 562 len); 563 /* Recover */ 564 while (inb_p(SMBHSTSTS(priv)) & 565 SMBHSTSTS_HOST_BUSY) 566 outb_p(SMBHSTSTS_BYTE_DONE, 567 SMBHSTSTS(priv)); 568 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); 569 return -EPROTO; 570 } 571 data->block[0] = len; 572 } 573 574 /* Retrieve/store value in SMBBLKDAT */ 575 if (read_write == I2C_SMBUS_READ) 576 data->block[i] = inb_p(SMBBLKDAT(priv)); 577 if (read_write == I2C_SMBUS_WRITE && i+1 <= len) 578 outb_p(data->block[i+1], SMBBLKDAT(priv)); 579 580 /* signals SMBBLKDAT ready */ 581 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); 582 } 583 584 status = i801_wait_intr(priv); 585 exit: 586 return i801_check_post(priv, status); 587 } 588 589 static int i801_set_block_buffer_mode(struct i801_priv *priv) 590 { 591 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv)); 592 if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) 593 return -EIO; 594 return 0; 595 } 596 597 /* Block transaction function */ 598 static int i801_block_transaction(struct i801_priv *priv, 599 union i2c_smbus_data *data, char read_write, 600 int command, int hwpec) 601 { 602 int result = 0; 603 unsigned char hostc; 604 605 if (command == I2C_SMBUS_I2C_BLOCK_DATA) { 606 if (read_write == I2C_SMBUS_WRITE) { 607 /* set I2C_EN bit in configuration register */ 608 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); 609 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, 610 hostc | SMBHSTCFG_I2C_EN); 611 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { 612 dev_err(&priv->pci_dev->dev, 613 "I2C block read is unsupported!\n"); 614 return -EOPNOTSUPP; 615 } 616 } 617 618 if (read_write == I2C_SMBUS_WRITE 619 || command == I2C_SMBUS_I2C_BLOCK_DATA) { 620 if (data->block[0] < 1) 621 data->block[0] = 1; 622 if (data->block[0] > I2C_SMBUS_BLOCK_MAX) 623 data->block[0] = I2C_SMBUS_BLOCK_MAX; 624 } else { 625 data->block[0] = 32; /* max for SMBus block reads */ 626 } 627 628 /* Experience has shown that the block buffer can only be used for 629 SMBus (not I2C) block transactions, even though the datasheet 630 doesn't mention this limitation. */ 631 if ((priv->features & FEATURE_BLOCK_BUFFER) 632 && command != I2C_SMBUS_I2C_BLOCK_DATA 633 && i801_set_block_buffer_mode(priv) == 0) 634 result = i801_block_transaction_by_block(priv, data, 635 read_write, hwpec); 636 else 637 result = i801_block_transaction_byte_by_byte(priv, data, 638 read_write, 639 command, hwpec); 640 641 if (command == I2C_SMBUS_I2C_BLOCK_DATA 642 && read_write == I2C_SMBUS_WRITE) { 643 /* restore saved configuration register value */ 644 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc); 645 } 646 return result; 647 } 648 649 /* Return negative errno on error. */ 650 static s32 i801_access(struct i2c_adapter *adap, u16 addr, 651 unsigned short flags, char read_write, u8 command, 652 int size, union i2c_smbus_data *data) 653 { 654 int hwpec; 655 int block = 0; 656 int ret, xact = 0; 657 struct i801_priv *priv = i2c_get_adapdata(adap); 658 659 hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) 660 && size != I2C_SMBUS_QUICK 661 && size != I2C_SMBUS_I2C_BLOCK_DATA; 662 663 switch (size) { 664 case I2C_SMBUS_QUICK: 665 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 666 SMBHSTADD(priv)); 667 xact = I801_QUICK; 668 break; 669 case I2C_SMBUS_BYTE: 670 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 671 SMBHSTADD(priv)); 672 if (read_write == I2C_SMBUS_WRITE) 673 outb_p(command, SMBHSTCMD(priv)); 674 xact = I801_BYTE; 675 break; 676 case I2C_SMBUS_BYTE_DATA: 677 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 678 SMBHSTADD(priv)); 679 outb_p(command, SMBHSTCMD(priv)); 680 if (read_write == I2C_SMBUS_WRITE) 681 outb_p(data->byte, SMBHSTDAT0(priv)); 682 xact = I801_BYTE_DATA; 683 break; 684 case I2C_SMBUS_WORD_DATA: 685 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 686 SMBHSTADD(priv)); 687 outb_p(command, SMBHSTCMD(priv)); 688 if (read_write == I2C_SMBUS_WRITE) { 689 outb_p(data->word & 0xff, SMBHSTDAT0(priv)); 690 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); 691 } 692 xact = I801_WORD_DATA; 693 break; 694 case I2C_SMBUS_BLOCK_DATA: 695 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 696 SMBHSTADD(priv)); 697 outb_p(command, SMBHSTCMD(priv)); 698 block = 1; 699 break; 700 case I2C_SMBUS_I2C_BLOCK_DATA: 701 /* NB: page 240 of ICH5 datasheet shows that the R/#W 702 * bit should be cleared here, even when reading */ 703 outb_p((addr & 0x7f) << 1, SMBHSTADD(priv)); 704 if (read_write == I2C_SMBUS_READ) { 705 /* NB: page 240 of ICH5 datasheet also shows 706 * that DATA1 is the cmd field when reading */ 707 outb_p(command, SMBHSTDAT1(priv)); 708 } else 709 outb_p(command, SMBHSTCMD(priv)); 710 block = 1; 711 break; 712 default: 713 dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n", 714 size); 715 return -EOPNOTSUPP; 716 } 717 718 if (hwpec) /* enable/disable hardware PEC */ 719 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv)); 720 else 721 outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), 722 SMBAUXCTL(priv)); 723 724 if (block) 725 ret = i801_block_transaction(priv, data, read_write, size, 726 hwpec); 727 else 728 ret = i801_transaction(priv, xact); 729 730 /* Some BIOSes don't like it when PEC is enabled at reboot or resume 731 time, so we forcibly disable it after every transaction. Turn off 732 E32B for the same reason. */ 733 if (hwpec || block) 734 outb_p(inb_p(SMBAUXCTL(priv)) & 735 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 736 737 if (block) 738 return ret; 739 if (ret) 740 return ret; 741 if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) 742 return 0; 743 744 switch (xact & 0x7f) { 745 case I801_BYTE: /* Result put in SMBHSTDAT0 */ 746 case I801_BYTE_DATA: 747 data->byte = inb_p(SMBHSTDAT0(priv)); 748 break; 749 case I801_WORD_DATA: 750 data->word = inb_p(SMBHSTDAT0(priv)) + 751 (inb_p(SMBHSTDAT1(priv)) << 8); 752 break; 753 } 754 return 0; 755 } 756 757 758 static u32 i801_func(struct i2c_adapter *adapter) 759 { 760 struct i801_priv *priv = i2c_get_adapdata(adapter); 761 762 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 763 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 764 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | 765 ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | 766 ((priv->features & FEATURE_I2C_BLOCK_READ) ? 767 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0); 768 } 769 770 static const struct i2c_algorithm smbus_algorithm = { 771 .smbus_xfer = i801_access, 772 .functionality = i801_func, 773 }; 774 775 static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { 776 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) }, 777 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) }, 778 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) }, 779 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) }, 780 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) }, 781 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) }, 782 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) }, 783 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) }, 784 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, 785 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) }, 786 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) }, 787 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) }, 788 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) }, 789 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, 790 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, 791 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) }, 792 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) }, 793 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) }, 794 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) }, 795 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) }, 796 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) }, 797 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) }, 798 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) }, 799 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, 800 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) }, 801 { 0, } 802 }; 803 804 MODULE_DEVICE_TABLE(pci, i801_ids); 805 806 #if defined CONFIG_X86 && defined CONFIG_DMI 807 static unsigned char apanel_addr; 808 809 /* Scan the system ROM for the signature "FJKEYINF" */ 810 static __init const void __iomem *bios_signature(const void __iomem *bios) 811 { 812 ssize_t offset; 813 const unsigned char signature[] = "FJKEYINF"; 814 815 for (offset = 0; offset < 0x10000; offset += 0x10) { 816 if (check_signature(bios + offset, signature, 817 sizeof(signature)-1)) 818 return bios + offset; 819 } 820 return NULL; 821 } 822 823 static void __init input_apanel_init(void) 824 { 825 void __iomem *bios; 826 const void __iomem *p; 827 828 bios = ioremap(0xF0000, 0x10000); /* Can't fail */ 829 p = bios_signature(bios); 830 if (p) { 831 /* just use the first address */ 832 apanel_addr = readb(p + 8 + 3) >> 1; 833 } 834 iounmap(bios); 835 } 836 837 struct dmi_onboard_device_info { 838 const char *name; 839 u8 type; 840 unsigned short i2c_addr; 841 const char *i2c_type; 842 }; 843 844 static const struct dmi_onboard_device_info dmi_devices[] = { 845 { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" }, 846 { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" }, 847 { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" }, 848 }; 849 850 static void dmi_check_onboard_device(u8 type, const char *name, 851 struct i2c_adapter *adap) 852 { 853 int i; 854 struct i2c_board_info info; 855 856 for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) { 857 /* & ~0x80, ignore enabled/disabled bit */ 858 if ((type & ~0x80) != dmi_devices[i].type) 859 continue; 860 if (strcasecmp(name, dmi_devices[i].name)) 861 continue; 862 863 memset(&info, 0, sizeof(struct i2c_board_info)); 864 info.addr = dmi_devices[i].i2c_addr; 865 strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE); 866 i2c_new_device(adap, &info); 867 break; 868 } 869 } 870 871 /* We use our own function to check for onboard devices instead of 872 dmi_find_device() as some buggy BIOS's have the devices we are interested 873 in marked as disabled */ 874 static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap) 875 { 876 int i, count; 877 878 if (dm->type != 10) 879 return; 880 881 count = (dm->length - sizeof(struct dmi_header)) / 2; 882 for (i = 0; i < count; i++) { 883 const u8 *d = (char *)(dm + 1) + (i * 2); 884 const char *name = ((char *) dm) + dm->length; 885 u8 type = d[0]; 886 u8 s = d[1]; 887 888 if (!s) 889 continue; 890 s--; 891 while (s > 0 && name[0]) { 892 name += strlen(name) + 1; 893 s--; 894 } 895 if (name[0] == 0) /* Bogus string reference */ 896 continue; 897 898 dmi_check_onboard_device(type, name, adap); 899 } 900 } 901 902 /* Register optional slaves */ 903 static void i801_probe_optional_slaves(struct i801_priv *priv) 904 { 905 /* Only register slaves on main SMBus channel */ 906 if (priv->features & FEATURE_IDF) 907 return; 908 909 if (apanel_addr) { 910 struct i2c_board_info info; 911 912 memset(&info, 0, sizeof(struct i2c_board_info)); 913 info.addr = apanel_addr; 914 strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE); 915 i2c_new_device(&priv->adapter, &info); 916 } 917 918 if (dmi_name_in_vendors("FUJITSU")) 919 dmi_walk(dmi_check_onboard_devices, &priv->adapter); 920 } 921 #else 922 static void __init input_apanel_init(void) {} 923 static void i801_probe_optional_slaves(struct i801_priv *priv) {} 924 #endif /* CONFIG_X86 && CONFIG_DMI */ 925 926 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ 927 defined CONFIG_DMI 928 static struct i801_mux_config i801_mux_config_asus_z8_d12 = { 929 .gpio_chip = "gpio_ich", 930 .values = { 0x02, 0x03 }, 931 .n_values = 2, 932 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD }, 933 .gpios = { 52, 53 }, 934 .n_gpios = 2, 935 }; 936 937 static struct i801_mux_config i801_mux_config_asus_z8_d18 = { 938 .gpio_chip = "gpio_ich", 939 .values = { 0x02, 0x03, 0x01 }, 940 .n_values = 3, 941 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD }, 942 .gpios = { 52, 53 }, 943 .n_gpios = 2, 944 }; 945 946 static const struct dmi_system_id mux_dmi_table[] = { 947 { 948 .matches = { 949 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 950 DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"), 951 }, 952 .driver_data = &i801_mux_config_asus_z8_d12, 953 }, 954 { 955 .matches = { 956 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 957 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"), 958 }, 959 .driver_data = &i801_mux_config_asus_z8_d12, 960 }, 961 { 962 .matches = { 963 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 964 DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"), 965 }, 966 .driver_data = &i801_mux_config_asus_z8_d12, 967 }, 968 { 969 .matches = { 970 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 971 DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"), 972 }, 973 .driver_data = &i801_mux_config_asus_z8_d12, 974 }, 975 { 976 .matches = { 977 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 978 DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"), 979 }, 980 .driver_data = &i801_mux_config_asus_z8_d12, 981 }, 982 { 983 .matches = { 984 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 985 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"), 986 }, 987 .driver_data = &i801_mux_config_asus_z8_d12, 988 }, 989 { 990 .matches = { 991 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 992 DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"), 993 }, 994 .driver_data = &i801_mux_config_asus_z8_d18, 995 }, 996 { 997 .matches = { 998 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 999 DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"), 1000 }, 1001 .driver_data = &i801_mux_config_asus_z8_d18, 1002 }, 1003 { 1004 .matches = { 1005 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1006 DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"), 1007 }, 1008 .driver_data = &i801_mux_config_asus_z8_d12, 1009 }, 1010 { } 1011 }; 1012 1013 /* Setup multiplexing if needed */ 1014 static int i801_add_mux(struct i801_priv *priv) 1015 { 1016 struct device *dev = &priv->adapter.dev; 1017 const struct i801_mux_config *mux_config; 1018 struct i2c_mux_gpio_platform_data gpio_data; 1019 int err; 1020 1021 if (!priv->mux_drvdata) 1022 return 0; 1023 mux_config = priv->mux_drvdata; 1024 1025 /* Prepare the platform data */ 1026 memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data)); 1027 gpio_data.parent = priv->adapter.nr; 1028 gpio_data.values = mux_config->values; 1029 gpio_data.n_values = mux_config->n_values; 1030 gpio_data.classes = mux_config->classes; 1031 gpio_data.gpio_chip = mux_config->gpio_chip; 1032 gpio_data.gpios = mux_config->gpios; 1033 gpio_data.n_gpios = mux_config->n_gpios; 1034 gpio_data.idle = I2C_MUX_GPIO_NO_IDLE; 1035 1036 /* Register the mux device */ 1037 priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio", 1038 PLATFORM_DEVID_AUTO, &gpio_data, 1039 sizeof(struct i2c_mux_gpio_platform_data)); 1040 if (IS_ERR(priv->mux_pdev)) { 1041 err = PTR_ERR(priv->mux_pdev); 1042 priv->mux_pdev = NULL; 1043 dev_err(dev, "Failed to register i2c-mux-gpio device\n"); 1044 return err; 1045 } 1046 1047 return 0; 1048 } 1049 1050 static void i801_del_mux(struct i801_priv *priv) 1051 { 1052 if (priv->mux_pdev) 1053 platform_device_unregister(priv->mux_pdev); 1054 } 1055 1056 static unsigned int i801_get_adapter_class(struct i801_priv *priv) 1057 { 1058 const struct dmi_system_id *id; 1059 const struct i801_mux_config *mux_config; 1060 unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD; 1061 int i; 1062 1063 id = dmi_first_match(mux_dmi_table); 1064 if (id) { 1065 /* Remove branch classes from trunk */ 1066 mux_config = id->driver_data; 1067 for (i = 0; i < mux_config->n_values; i++) 1068 class &= ~mux_config->classes[i]; 1069 1070 /* Remember for later */ 1071 priv->mux_drvdata = mux_config; 1072 } 1073 1074 return class; 1075 } 1076 #else 1077 static inline int i801_add_mux(struct i801_priv *priv) { return 0; } 1078 static inline void i801_del_mux(struct i801_priv *priv) { } 1079 1080 static inline unsigned int i801_get_adapter_class(struct i801_priv *priv) 1081 { 1082 return I2C_CLASS_HWMON | I2C_CLASS_SPD; 1083 } 1084 #endif 1085 1086 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) 1087 { 1088 unsigned char temp; 1089 int err, i; 1090 struct i801_priv *priv; 1091 1092 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 1093 if (!priv) 1094 return -ENOMEM; 1095 1096 i2c_set_adapdata(&priv->adapter, priv); 1097 priv->adapter.owner = THIS_MODULE; 1098 priv->adapter.class = i801_get_adapter_class(priv); 1099 priv->adapter.algo = &smbus_algorithm; 1100 1101 priv->pci_dev = dev; 1102 switch (dev->device) { 1103 case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0: 1104 case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1: 1105 case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2: 1106 priv->features |= FEATURE_IDF; 1107 /* fall through */ 1108 default: 1109 priv->features |= FEATURE_I2C_BLOCK_READ; 1110 priv->features |= FEATURE_IRQ; 1111 /* fall through */ 1112 case PCI_DEVICE_ID_INTEL_82801DB_3: 1113 priv->features |= FEATURE_SMBUS_PEC; 1114 priv->features |= FEATURE_BLOCK_BUFFER; 1115 /* fall through */ 1116 case PCI_DEVICE_ID_INTEL_82801CA_3: 1117 case PCI_DEVICE_ID_INTEL_82801BA_2: 1118 case PCI_DEVICE_ID_INTEL_82801AB_3: 1119 case PCI_DEVICE_ID_INTEL_82801AA_3: 1120 break; 1121 } 1122 1123 /* Disable features on user request */ 1124 for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { 1125 if (priv->features & disable_features & (1 << i)) 1126 dev_notice(&dev->dev, "%s disabled by user\n", 1127 i801_feature_names[i]); 1128 } 1129 priv->features &= ~disable_features; 1130 1131 err = pci_enable_device(dev); 1132 if (err) { 1133 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n", 1134 err); 1135 goto exit; 1136 } 1137 1138 /* Determine the address of the SMBus area */ 1139 priv->smba = pci_resource_start(dev, SMBBAR); 1140 if (!priv->smba) { 1141 dev_err(&dev->dev, "SMBus base address uninitialized, " 1142 "upgrade BIOS\n"); 1143 err = -ENODEV; 1144 goto exit; 1145 } 1146 1147 err = acpi_check_resource_conflict(&dev->resource[SMBBAR]); 1148 if (err) { 1149 err = -ENODEV; 1150 goto exit; 1151 } 1152 1153 err = pci_request_region(dev, SMBBAR, i801_driver.name); 1154 if (err) { 1155 dev_err(&dev->dev, "Failed to request SMBus region " 1156 "0x%lx-0x%Lx\n", priv->smba, 1157 (unsigned long long)pci_resource_end(dev, SMBBAR)); 1158 goto exit; 1159 } 1160 1161 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp); 1162 priv->original_hstcfg = temp; 1163 temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ 1164 if (!(temp & SMBHSTCFG_HST_EN)) { 1165 dev_info(&dev->dev, "Enabling SMBus device\n"); 1166 temp |= SMBHSTCFG_HST_EN; 1167 } 1168 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp); 1169 1170 if (temp & SMBHSTCFG_SMB_SMI_EN) { 1171 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); 1172 /* Disable SMBus interrupt feature if SMBus using SMI# */ 1173 priv->features &= ~FEATURE_IRQ; 1174 } 1175 1176 /* Clear special mode bits */ 1177 if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) 1178 outb_p(inb_p(SMBAUXCTL(priv)) & 1179 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 1180 1181 if (priv->features & FEATURE_IRQ) { 1182 init_waitqueue_head(&priv->waitq); 1183 1184 err = request_irq(dev->irq, i801_isr, IRQF_SHARED, 1185 i801_driver.name, priv); 1186 if (err) { 1187 dev_err(&dev->dev, "Failed to allocate irq %d: %d\n", 1188 dev->irq, err); 1189 goto exit_release; 1190 } 1191 dev_info(&dev->dev, "SMBus using PCI Interrupt\n"); 1192 } 1193 1194 /* set up the sysfs linkage to our parent device */ 1195 priv->adapter.dev.parent = &dev->dev; 1196 1197 /* Retry up to 3 times on lost arbitration */ 1198 priv->adapter.retries = 3; 1199 1200 snprintf(priv->adapter.name, sizeof(priv->adapter.name), 1201 "SMBus I801 adapter at %04lx", priv->smba); 1202 err = i2c_add_adapter(&priv->adapter); 1203 if (err) { 1204 dev_err(&dev->dev, "Failed to add SMBus adapter\n"); 1205 goto exit_free_irq; 1206 } 1207 1208 of_i2c_register_devices(&priv->adapter); 1209 i801_probe_optional_slaves(priv); 1210 /* We ignore errors - multiplexing is optional */ 1211 i801_add_mux(priv); 1212 1213 pci_set_drvdata(dev, priv); 1214 1215 return 0; 1216 1217 exit_free_irq: 1218 if (priv->features & FEATURE_IRQ) 1219 free_irq(dev->irq, priv); 1220 exit_release: 1221 pci_release_region(dev, SMBBAR); 1222 exit: 1223 kfree(priv); 1224 return err; 1225 } 1226 1227 static void i801_remove(struct pci_dev *dev) 1228 { 1229 struct i801_priv *priv = pci_get_drvdata(dev); 1230 1231 i801_del_mux(priv); 1232 i2c_del_adapter(&priv->adapter); 1233 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 1234 1235 if (priv->features & FEATURE_IRQ) 1236 free_irq(dev->irq, priv); 1237 pci_release_region(dev, SMBBAR); 1238 1239 pci_set_drvdata(dev, NULL); 1240 kfree(priv); 1241 /* 1242 * do not call pci_disable_device(dev) since it can cause hard hangs on 1243 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) 1244 */ 1245 } 1246 1247 #ifdef CONFIG_PM 1248 static int i801_suspend(struct pci_dev *dev, pm_message_t mesg) 1249 { 1250 struct i801_priv *priv = pci_get_drvdata(dev); 1251 1252 pci_save_state(dev); 1253 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 1254 pci_set_power_state(dev, pci_choose_state(dev, mesg)); 1255 return 0; 1256 } 1257 1258 static int i801_resume(struct pci_dev *dev) 1259 { 1260 pci_set_power_state(dev, PCI_D0); 1261 pci_restore_state(dev); 1262 return pci_enable_device(dev); 1263 } 1264 #else 1265 #define i801_suspend NULL 1266 #define i801_resume NULL 1267 #endif 1268 1269 static struct pci_driver i801_driver = { 1270 .name = "i801_smbus", 1271 .id_table = i801_ids, 1272 .probe = i801_probe, 1273 .remove = i801_remove, 1274 .suspend = i801_suspend, 1275 .resume = i801_resume, 1276 }; 1277 1278 static int __init i2c_i801_init(void) 1279 { 1280 if (dmi_name_in_vendors("FUJITSU")) 1281 input_apanel_init(); 1282 return pci_register_driver(&i801_driver); 1283 } 1284 1285 static void __exit i2c_i801_exit(void) 1286 { 1287 pci_unregister_driver(&i801_driver); 1288 } 1289 1290 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, " 1291 "Jean Delvare <khali@linux-fr.org>"); 1292 MODULE_DESCRIPTION("I801 SMBus driver"); 1293 MODULE_LICENSE("GPL"); 1294 1295 module_init(i2c_i801_init); 1296 module_exit(i2c_i801_exit); 1297