1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, 4 Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker 5 <mdsxyz123@yahoo.com> 6 Copyright (C) 2007 - 2014 Jean Delvare <jdelvare@suse.de> 7 Copyright (C) 2010 Intel Corporation, 8 David Woodhouse <dwmw2@infradead.org> 9 10 */ 11 12 /* 13 * Supports the following Intel I/O Controller Hubs (ICH): 14 * 15 * I/O Block I2C 16 * region SMBus Block proc. block 17 * Chip name PCI ID size PEC buffer call read 18 * --------------------------------------------------------------------------- 19 * 82801AA (ICH) 0x2413 16 no no no no 20 * 82801AB (ICH0) 0x2423 16 no no no no 21 * 82801BA (ICH2) 0x2443 16 no no no no 22 * 82801CA (ICH3) 0x2483 32 soft no no no 23 * 82801DB (ICH4) 0x24c3 32 hard yes no no 24 * 82801E (ICH5) 0x24d3 32 hard yes yes yes 25 * 6300ESB 0x25a4 32 hard yes yes yes 26 * 82801F (ICH6) 0x266a 32 hard yes yes yes 27 * 6310ESB/6320ESB 0x269b 32 hard yes yes yes 28 * 82801G (ICH7) 0x27da 32 hard yes yes yes 29 * 82801H (ICH8) 0x283e 32 hard yes yes yes 30 * 82801I (ICH9) 0x2930 32 hard yes yes yes 31 * EP80579 (Tolapai) 0x5032 32 hard yes yes yes 32 * ICH10 0x3a30 32 hard yes yes yes 33 * ICH10 0x3a60 32 hard yes yes yes 34 * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes 35 * 6 Series (PCH) 0x1c22 32 hard yes yes yes 36 * Patsburg (PCH) 0x1d22 32 hard yes yes yes 37 * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes 38 * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes 39 * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes 40 * DH89xxCC (PCH) 0x2330 32 hard yes yes yes 41 * Panther Point (PCH) 0x1e22 32 hard yes yes yes 42 * Lynx Point (PCH) 0x8c22 32 hard yes yes yes 43 * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes 44 * Avoton (SOC) 0x1f3c 32 hard yes yes yes 45 * Wellsburg (PCH) 0x8d22 32 hard yes yes yes 46 * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes 47 * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes 48 * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes 49 * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes 50 * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes 51 * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes 52 * BayTrail (SOC) 0x0f12 32 hard yes yes yes 53 * Braswell (SOC) 0x2292 32 hard yes yes yes 54 * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes 55 * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes 56 * DNV (SOC) 0x19df 32 hard yes yes yes 57 * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes 58 * Broxton (SOC) 0x5ad4 32 hard yes yes yes 59 * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes 60 * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes 61 * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes 62 * Gemini Lake (SOC) 0x31d4 32 hard yes yes yes 63 * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes 64 * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes 65 * Cedar Fork (PCH) 0x18df 32 hard yes yes yes 66 * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes 67 * Ice Lake-N (PCH) 0x38a3 32 hard yes yes yes 68 * Comet Lake (PCH) 0x02a3 32 hard yes yes yes 69 * Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes 70 * Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes 71 * Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes 72 * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes 73 * Jasper Lake (SOC) 0x4da3 32 hard yes yes yes 74 * Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes 75 * Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes 76 * Alder Lake-P (PCH) 0x51a3 32 hard yes yes yes 77 * Alder Lake-M (PCH) 0x54a3 32 hard yes yes yes 78 * Raptor Lake-S (PCH) 0x7a23 32 hard yes yes yes 79 * Meteor Lake-P (SOC) 0x7e22 32 hard yes yes yes 80 * 81 * Features supported by this driver: 82 * Software PEC no 83 * Hardware PEC yes 84 * Block buffer yes 85 * Block process call transaction yes 86 * I2C block read transaction yes (doesn't use the block buffer) 87 * Slave mode no 88 * SMBus Host Notify yes 89 * Interrupt processing yes 90 * 91 * See the file Documentation/i2c/busses/i2c-i801.rst for details. 92 */ 93 94 #define DRV_NAME "i801_smbus" 95 96 #include <linux/interrupt.h> 97 #include <linux/module.h> 98 #include <linux/pci.h> 99 #include <linux/kernel.h> 100 #include <linux/stddef.h> 101 #include <linux/delay.h> 102 #include <linux/ioport.h> 103 #include <linux/init.h> 104 #include <linux/i2c.h> 105 #include <linux/i2c-smbus.h> 106 #include <linux/acpi.h> 107 #include <linux/io.h> 108 #include <linux/dmi.h> 109 #include <linux/slab.h> 110 #include <linux/string.h> 111 #include <linux/completion.h> 112 #include <linux/err.h> 113 #include <linux/platform_device.h> 114 #include <linux/platform_data/itco_wdt.h> 115 #include <linux/platform_data/x86/p2sb.h> 116 #include <linux/pm_runtime.h> 117 #include <linux/mutex.h> 118 119 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI 120 #include <linux/gpio/machine.h> 121 #include <linux/platform_data/i2c-mux-gpio.h> 122 #endif 123 124 /* I801 SMBus address offsets */ 125 #define SMBHSTSTS(p) (0 + (p)->smba) 126 #define SMBHSTCNT(p) (2 + (p)->smba) 127 #define SMBHSTCMD(p) (3 + (p)->smba) 128 #define SMBHSTADD(p) (4 + (p)->smba) 129 #define SMBHSTDAT0(p) (5 + (p)->smba) 130 #define SMBHSTDAT1(p) (6 + (p)->smba) 131 #define SMBBLKDAT(p) (7 + (p)->smba) 132 #define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */ 133 #define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */ 134 #define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */ 135 #define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */ 136 #define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */ 137 #define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */ 138 139 /* PCI Address Constants */ 140 #define SMBBAR 4 141 #define SMBHSTCFG 0x040 142 #define TCOBASE 0x050 143 #define TCOCTL 0x054 144 145 #define SBREG_SMBCTRL 0xc6000c 146 #define SBREG_SMBCTRL_DNV 0xcf000c 147 148 /* Host configuration bits for SMBHSTCFG */ 149 #define SMBHSTCFG_HST_EN BIT(0) 150 #define SMBHSTCFG_SMB_SMI_EN BIT(1) 151 #define SMBHSTCFG_I2C_EN BIT(2) 152 #define SMBHSTCFG_SPD_WD BIT(4) 153 154 /* TCO configuration bits for TCOCTL */ 155 #define TCOCTL_EN BIT(8) 156 157 /* Auxiliary status register bits, ICH4+ only */ 158 #define SMBAUXSTS_CRCE BIT(0) 159 #define SMBAUXSTS_STCO BIT(1) 160 161 /* Auxiliary control register bits, ICH4+ only */ 162 #define SMBAUXCTL_CRC BIT(0) 163 #define SMBAUXCTL_E32B BIT(1) 164 165 /* I801 command constants */ 166 #define I801_QUICK 0x00 167 #define I801_BYTE 0x04 168 #define I801_BYTE_DATA 0x08 169 #define I801_WORD_DATA 0x0C 170 #define I801_PROC_CALL 0x10 171 #define I801_BLOCK_DATA 0x14 172 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ 173 #define I801_BLOCK_PROC_CALL 0x1C 174 175 /* I801 Host Control register bits */ 176 #define SMBHSTCNT_INTREN BIT(0) 177 #define SMBHSTCNT_KILL BIT(1) 178 #define SMBHSTCNT_LAST_BYTE BIT(5) 179 #define SMBHSTCNT_START BIT(6) 180 #define SMBHSTCNT_PEC_EN BIT(7) /* ICH3 and later */ 181 182 /* I801 Hosts Status register bits */ 183 #define SMBHSTSTS_BYTE_DONE BIT(7) 184 #define SMBHSTSTS_INUSE_STS BIT(6) 185 #define SMBHSTSTS_SMBALERT_STS BIT(5) 186 #define SMBHSTSTS_FAILED BIT(4) 187 #define SMBHSTSTS_BUS_ERR BIT(3) 188 #define SMBHSTSTS_DEV_ERR BIT(2) 189 #define SMBHSTSTS_INTR BIT(1) 190 #define SMBHSTSTS_HOST_BUSY BIT(0) 191 192 /* Host Notify Status register bits */ 193 #define SMBSLVSTS_HST_NTFY_STS BIT(0) 194 195 /* Host Notify Command register bits */ 196 #define SMBSLVCMD_SMBALERT_DISABLE BIT(2) 197 #define SMBSLVCMD_HST_NTFY_INTREN BIT(0) 198 199 #define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ 200 SMBHSTSTS_DEV_ERR) 201 202 #define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \ 203 STATUS_ERROR_FLAGS) 204 205 /* Older devices have their ID defined in <linux/pci_ids.h> */ 206 #define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3 207 #define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS 0x06a3 208 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 209 #define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df 210 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df 211 #define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9 212 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 213 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 214 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ 215 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 216 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 217 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 218 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 219 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c 220 #define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292 221 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 222 #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 223 #define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4 224 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3 225 #define PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS 0x38a3 226 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 227 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3 228 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23 229 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3 230 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3 231 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3 232 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 233 #define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23 234 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3 235 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_P_SMBUS 0x7e22 236 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 237 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2 238 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22 239 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d 240 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e 241 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f 242 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 243 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 244 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 245 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3 246 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS 0xa0a3 247 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 248 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3 249 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223 250 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3 251 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323 252 #define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS 0xa3a3 253 254 struct i801_mux_config { 255 char *gpio_chip; 256 unsigned values[3]; 257 int n_values; 258 unsigned classes[3]; 259 unsigned gpios[2]; /* Relative to gpio_chip->base */ 260 int n_gpios; 261 }; 262 263 struct i801_priv { 264 struct i2c_adapter adapter; 265 unsigned long smba; 266 unsigned char original_hstcfg; 267 unsigned char original_hstcnt; 268 unsigned char original_slvcmd; 269 struct pci_dev *pci_dev; 270 unsigned int features; 271 272 /* isr processing */ 273 struct completion done; 274 u8 status; 275 276 /* Command state used by isr for byte-by-byte block transactions */ 277 u8 cmd; 278 bool is_read; 279 int count; 280 int len; 281 u8 *data; 282 283 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI 284 const struct i801_mux_config *mux_drvdata; 285 struct platform_device *mux_pdev; 286 struct gpiod_lookup_table *lookup; 287 #endif 288 struct platform_device *tco_pdev; 289 290 /* 291 * If set to true the host controller registers are reserved for 292 * ACPI AML use. Protected by acpi_lock. 293 */ 294 bool acpi_reserved; 295 struct mutex acpi_lock; 296 }; 297 298 #define FEATURE_SMBUS_PEC BIT(0) 299 #define FEATURE_BLOCK_BUFFER BIT(1) 300 #define FEATURE_BLOCK_PROC BIT(2) 301 #define FEATURE_I2C_BLOCK_READ BIT(3) 302 #define FEATURE_IRQ BIT(4) 303 #define FEATURE_HOST_NOTIFY BIT(5) 304 /* Not really a feature, but it's convenient to handle it as such */ 305 #define FEATURE_IDF BIT(15) 306 #define FEATURE_TCO_SPT BIT(16) 307 #define FEATURE_TCO_CNL BIT(17) 308 309 static const char *i801_feature_names[] = { 310 "SMBus PEC", 311 "Block buffer", 312 "Block process call", 313 "I2C block read", 314 "Interrupt", 315 "SMBus Host Notify", 316 }; 317 318 static unsigned int disable_features; 319 module_param(disable_features, uint, S_IRUGO | S_IWUSR); 320 MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n" 321 "\t\t 0x01 disable SMBus PEC\n" 322 "\t\t 0x02 disable the block buffer\n" 323 "\t\t 0x08 disable the I2C block read functionality\n" 324 "\t\t 0x10 don't use interrupts\n" 325 "\t\t 0x20 disable SMBus Host Notify "); 326 327 /* Make sure the SMBus host is ready to start transmitting. 328 Return 0 if it is, -EBUSY if it is not. */ 329 static int i801_check_pre(struct i801_priv *priv) 330 { 331 int status; 332 333 status = inb_p(SMBHSTSTS(priv)); 334 if (status & SMBHSTSTS_HOST_BUSY) { 335 pci_err(priv->pci_dev, "SMBus is busy, can't use it!\n"); 336 return -EBUSY; 337 } 338 339 status &= STATUS_FLAGS; 340 if (status) { 341 pci_dbg(priv->pci_dev, "Clearing status flags (%02x)\n", status); 342 outb_p(status, SMBHSTSTS(priv)); 343 } 344 345 /* 346 * Clear CRC status if needed. 347 * During normal operation, i801_check_post() takes care 348 * of it after every operation. We do it here only in case 349 * the hardware was already in this state when the driver 350 * started. 351 */ 352 if (priv->features & FEATURE_SMBUS_PEC) { 353 status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE; 354 if (status) { 355 pci_dbg(priv->pci_dev, "Clearing aux status flags (%02x)\n", status); 356 outb_p(status, SMBAUXSTS(priv)); 357 } 358 } 359 360 return 0; 361 } 362 363 static int i801_check_post(struct i801_priv *priv, int status) 364 { 365 int result = 0; 366 367 /* 368 * If the SMBus is still busy, we give up 369 */ 370 if (unlikely(status < 0)) { 371 dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); 372 /* try to stop the current command */ 373 dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); 374 outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv)); 375 usleep_range(1000, 2000); 376 outb_p(0, SMBHSTCNT(priv)); 377 378 /* Check if it worked */ 379 status = inb_p(SMBHSTSTS(priv)); 380 if ((status & SMBHSTSTS_HOST_BUSY) || 381 !(status & SMBHSTSTS_FAILED)) 382 dev_err(&priv->pci_dev->dev, 383 "Failed terminating the transaction\n"); 384 return -ETIMEDOUT; 385 } 386 387 if (status & SMBHSTSTS_FAILED) { 388 result = -EIO; 389 dev_err(&priv->pci_dev->dev, "Transaction failed\n"); 390 } 391 if (status & SMBHSTSTS_DEV_ERR) { 392 /* 393 * This may be a PEC error, check and clear it. 394 * 395 * AUXSTS is handled differently from HSTSTS. 396 * For HSTSTS, i801_isr() or i801_wait_intr() 397 * has already cleared the error bits in hardware, 398 * and we are passed a copy of the original value 399 * in "status". 400 * For AUXSTS, the hardware register is left 401 * for us to handle here. 402 * This is asymmetric, slightly iffy, but safe, 403 * since all this code is serialized and the CRCE 404 * bit is harmless as long as it's cleared before 405 * the next operation. 406 */ 407 if ((priv->features & FEATURE_SMBUS_PEC) && 408 (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) { 409 outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv)); 410 result = -EBADMSG; 411 dev_dbg(&priv->pci_dev->dev, "PEC error\n"); 412 } else { 413 result = -ENXIO; 414 dev_dbg(&priv->pci_dev->dev, "No response\n"); 415 } 416 } 417 if (status & SMBHSTSTS_BUS_ERR) { 418 result = -EAGAIN; 419 dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); 420 } 421 422 return result; 423 } 424 425 /* Wait for BUSY being cleared and either INTR or an error flag being set */ 426 static int i801_wait_intr(struct i801_priv *priv) 427 { 428 unsigned long timeout = jiffies + priv->adapter.timeout; 429 int status, busy; 430 431 do { 432 usleep_range(250, 500); 433 status = inb_p(SMBHSTSTS(priv)); 434 busy = status & SMBHSTSTS_HOST_BUSY; 435 status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR; 436 if (!busy && status) 437 return status; 438 } while (time_is_after_eq_jiffies(timeout)); 439 440 return -ETIMEDOUT; 441 } 442 443 /* Wait for either BYTE_DONE or an error flag being set */ 444 static int i801_wait_byte_done(struct i801_priv *priv) 445 { 446 unsigned long timeout = jiffies + priv->adapter.timeout; 447 int status; 448 449 do { 450 usleep_range(250, 500); 451 status = inb_p(SMBHSTSTS(priv)); 452 if (status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) 453 return status & STATUS_ERROR_FLAGS; 454 } while (time_is_after_eq_jiffies(timeout)); 455 456 return -ETIMEDOUT; 457 } 458 459 static int i801_transaction(struct i801_priv *priv, int xact) 460 { 461 int status; 462 unsigned long result; 463 const struct i2c_adapter *adap = &priv->adapter; 464 465 status = i801_check_pre(priv); 466 if (status < 0) 467 return status; 468 469 if (priv->features & FEATURE_IRQ) { 470 reinit_completion(&priv->done); 471 outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START, 472 SMBHSTCNT(priv)); 473 result = wait_for_completion_timeout(&priv->done, adap->timeout); 474 return i801_check_post(priv, result ? priv->status : -ETIMEDOUT); 475 } 476 477 outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); 478 479 status = i801_wait_intr(priv); 480 return i801_check_post(priv, status); 481 } 482 483 static int i801_block_transaction_by_block(struct i801_priv *priv, 484 union i2c_smbus_data *data, 485 char read_write, int command) 486 { 487 int i, len, status, xact; 488 489 switch (command) { 490 case I2C_SMBUS_BLOCK_PROC_CALL: 491 xact = I801_BLOCK_PROC_CALL; 492 break; 493 case I2C_SMBUS_BLOCK_DATA: 494 xact = I801_BLOCK_DATA; 495 break; 496 default: 497 return -EOPNOTSUPP; 498 } 499 500 /* Set block buffer mode */ 501 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv)); 502 503 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ 504 505 if (read_write == I2C_SMBUS_WRITE) { 506 len = data->block[0]; 507 outb_p(len, SMBHSTDAT0(priv)); 508 for (i = 0; i < len; i++) 509 outb_p(data->block[i+1], SMBBLKDAT(priv)); 510 } 511 512 status = i801_transaction(priv, xact); 513 if (status) 514 return status; 515 516 if (read_write == I2C_SMBUS_READ || 517 command == I2C_SMBUS_BLOCK_PROC_CALL) { 518 len = inb_p(SMBHSTDAT0(priv)); 519 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) 520 return -EPROTO; 521 522 data->block[0] = len; 523 for (i = 0; i < len; i++) 524 data->block[i + 1] = inb_p(SMBBLKDAT(priv)); 525 } 526 return 0; 527 } 528 529 static void i801_isr_byte_done(struct i801_priv *priv) 530 { 531 if (priv->is_read) { 532 /* For SMBus block reads, length is received with first byte */ 533 if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) && 534 (priv->count == 0)) { 535 priv->len = inb_p(SMBHSTDAT0(priv)); 536 if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) { 537 dev_err(&priv->pci_dev->dev, 538 "Illegal SMBus block read size %d\n", 539 priv->len); 540 /* FIXME: Recover */ 541 priv->len = I2C_SMBUS_BLOCK_MAX; 542 } 543 priv->data[-1] = priv->len; 544 } 545 546 /* Read next byte */ 547 if (priv->count < priv->len) 548 priv->data[priv->count++] = inb(SMBBLKDAT(priv)); 549 else 550 dev_dbg(&priv->pci_dev->dev, 551 "Discarding extra byte on block read\n"); 552 553 /* Set LAST_BYTE for last byte of read transaction */ 554 if (priv->count == priv->len - 1) 555 outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE, 556 SMBHSTCNT(priv)); 557 } else if (priv->count < priv->len - 1) { 558 /* Write next byte, except for IRQ after last byte */ 559 outb_p(priv->data[++priv->count], SMBBLKDAT(priv)); 560 } 561 562 /* Clear BYTE_DONE to continue with next byte */ 563 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); 564 } 565 566 static irqreturn_t i801_host_notify_isr(struct i801_priv *priv) 567 { 568 unsigned short addr; 569 570 addr = inb_p(SMBNTFDADD(priv)) >> 1; 571 572 /* 573 * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba) 574 * always returns 0. Our current implementation doesn't provide 575 * data, so we just ignore it. 576 */ 577 i2c_handle_smbus_host_notify(&priv->adapter, addr); 578 579 /* clear Host Notify bit and return */ 580 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); 581 return IRQ_HANDLED; 582 } 583 584 /* 585 * There are three kinds of interrupts: 586 * 587 * 1) i801 signals transaction completion with one of these interrupts: 588 * INTR - Success 589 * DEV_ERR - Invalid command, NAK or communication timeout 590 * BUS_ERR - SMI# transaction collision 591 * FAILED - transaction was canceled due to a KILL request 592 * When any of these occur, update ->status and signal completion. 593 * ->status must be cleared before kicking off the next transaction. 594 * 595 * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt 596 * occurs for each byte of a byte-by-byte to prepare the next byte. 597 * 598 * 3) Host Notify interrupts 599 */ 600 static irqreturn_t i801_isr(int irq, void *dev_id) 601 { 602 struct i801_priv *priv = dev_id; 603 u16 pcists; 604 u8 status; 605 606 /* Confirm this is our interrupt */ 607 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists); 608 if (!(pcists & PCI_STATUS_INTERRUPT)) 609 return IRQ_NONE; 610 611 if (priv->features & FEATURE_HOST_NOTIFY) { 612 status = inb_p(SMBSLVSTS(priv)); 613 if (status & SMBSLVSTS_HST_NTFY_STS) 614 return i801_host_notify_isr(priv); 615 } 616 617 status = inb_p(SMBHSTSTS(priv)); 618 if (status & SMBHSTSTS_BYTE_DONE) 619 i801_isr_byte_done(priv); 620 621 /* 622 * Clear remaining IRQ sources: Completion of last command, errors 623 * and the SMB_ALERT signal. SMB_ALERT status is set after signal 624 * assertion independently of the interrupt generation being blocked 625 * or not so clear it always when the status is set. 626 */ 627 status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS | SMBHSTSTS_SMBALERT_STS; 628 if (status) 629 outb_p(status, SMBHSTSTS(priv)); 630 status &= ~SMBHSTSTS_SMBALERT_STS; /* SMB_ALERT not reported */ 631 /* 632 * Report transaction result. 633 * ->status must be cleared before the next transaction is started. 634 */ 635 if (status) { 636 priv->status = status; 637 complete(&priv->done); 638 } 639 640 return IRQ_HANDLED; 641 } 642 643 /* 644 * For "byte-by-byte" block transactions: 645 * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1 646 * I2C read uses cmd=I801_I2C_BLOCK_DATA 647 */ 648 static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, 649 union i2c_smbus_data *data, 650 char read_write, int command) 651 { 652 int i, len; 653 int smbcmd; 654 int status; 655 unsigned long result; 656 const struct i2c_adapter *adap = &priv->adapter; 657 658 if (command == I2C_SMBUS_BLOCK_PROC_CALL) 659 return -EOPNOTSUPP; 660 661 status = i801_check_pre(priv); 662 if (status < 0) 663 return status; 664 665 len = data->block[0]; 666 667 if (read_write == I2C_SMBUS_WRITE) { 668 outb_p(len, SMBHSTDAT0(priv)); 669 outb_p(data->block[1], SMBBLKDAT(priv)); 670 } 671 672 if (command == I2C_SMBUS_I2C_BLOCK_DATA && 673 read_write == I2C_SMBUS_READ) 674 smbcmd = I801_I2C_BLOCK_DATA; 675 else 676 smbcmd = I801_BLOCK_DATA; 677 678 if (priv->features & FEATURE_IRQ) { 679 priv->is_read = (read_write == I2C_SMBUS_READ); 680 if (len == 1 && priv->is_read) 681 smbcmd |= SMBHSTCNT_LAST_BYTE; 682 priv->cmd = smbcmd | SMBHSTCNT_INTREN; 683 priv->len = len; 684 priv->count = 0; 685 priv->data = &data->block[1]; 686 687 reinit_completion(&priv->done); 688 outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv)); 689 result = wait_for_completion_timeout(&priv->done, adap->timeout); 690 return i801_check_post(priv, result ? priv->status : -ETIMEDOUT); 691 } 692 693 for (i = 1; i <= len; i++) { 694 if (i == len && read_write == I2C_SMBUS_READ) 695 smbcmd |= SMBHSTCNT_LAST_BYTE; 696 outb_p(smbcmd, SMBHSTCNT(priv)); 697 698 if (i == 1) 699 outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START, 700 SMBHSTCNT(priv)); 701 702 status = i801_wait_byte_done(priv); 703 if (status) 704 goto exit; 705 706 if (i == 1 && read_write == I2C_SMBUS_READ 707 && command != I2C_SMBUS_I2C_BLOCK_DATA) { 708 len = inb_p(SMBHSTDAT0(priv)); 709 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { 710 dev_err(&priv->pci_dev->dev, 711 "Illegal SMBus block read size %d\n", 712 len); 713 /* Recover */ 714 while (inb_p(SMBHSTSTS(priv)) & 715 SMBHSTSTS_HOST_BUSY) 716 outb_p(SMBHSTSTS_BYTE_DONE, 717 SMBHSTSTS(priv)); 718 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); 719 return -EPROTO; 720 } 721 data->block[0] = len; 722 } 723 724 /* Retrieve/store value in SMBBLKDAT */ 725 if (read_write == I2C_SMBUS_READ) 726 data->block[i] = inb_p(SMBBLKDAT(priv)); 727 if (read_write == I2C_SMBUS_WRITE && i+1 <= len) 728 outb_p(data->block[i+1], SMBBLKDAT(priv)); 729 730 /* signals SMBBLKDAT ready */ 731 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); 732 } 733 734 status = i801_wait_intr(priv); 735 exit: 736 return i801_check_post(priv, status); 737 } 738 739 /* Block transaction function */ 740 static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data, 741 char read_write, int command) 742 { 743 int result = 0; 744 unsigned char hostc; 745 746 if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA) 747 data->block[0] = I2C_SMBUS_BLOCK_MAX; 748 else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) 749 return -EPROTO; 750 751 if (command == I2C_SMBUS_I2C_BLOCK_DATA) { 752 if (read_write == I2C_SMBUS_WRITE) { 753 /* set I2C_EN bit in configuration register */ 754 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); 755 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, 756 hostc | SMBHSTCFG_I2C_EN); 757 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { 758 dev_err(&priv->pci_dev->dev, 759 "I2C block read is unsupported!\n"); 760 return -EOPNOTSUPP; 761 } 762 } 763 764 /* Experience has shown that the block buffer can only be used for 765 SMBus (not I2C) block transactions, even though the datasheet 766 doesn't mention this limitation. */ 767 if ((priv->features & FEATURE_BLOCK_BUFFER) && 768 command != I2C_SMBUS_I2C_BLOCK_DATA) 769 result = i801_block_transaction_by_block(priv, data, 770 read_write, 771 command); 772 else 773 result = i801_block_transaction_byte_by_byte(priv, data, 774 read_write, 775 command); 776 777 if (command == I2C_SMBUS_I2C_BLOCK_DATA 778 && read_write == I2C_SMBUS_WRITE) { 779 /* restore saved configuration register value */ 780 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc); 781 } 782 return result; 783 } 784 785 /* Return negative errno on error. */ 786 static s32 i801_access(struct i2c_adapter *adap, u16 addr, 787 unsigned short flags, char read_write, u8 command, 788 int size, union i2c_smbus_data *data) 789 { 790 int hwpec; 791 int block = 0; 792 int ret, xact; 793 struct i801_priv *priv = i2c_get_adapdata(adap); 794 795 mutex_lock(&priv->acpi_lock); 796 if (priv->acpi_reserved) { 797 mutex_unlock(&priv->acpi_lock); 798 return -EBUSY; 799 } 800 801 pm_runtime_get_sync(&priv->pci_dev->dev); 802 803 hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) 804 && size != I2C_SMBUS_QUICK 805 && size != I2C_SMBUS_I2C_BLOCK_DATA; 806 807 switch (size) { 808 case I2C_SMBUS_QUICK: 809 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 810 SMBHSTADD(priv)); 811 xact = I801_QUICK; 812 break; 813 case I2C_SMBUS_BYTE: 814 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 815 SMBHSTADD(priv)); 816 if (read_write == I2C_SMBUS_WRITE) 817 outb_p(command, SMBHSTCMD(priv)); 818 xact = I801_BYTE; 819 break; 820 case I2C_SMBUS_BYTE_DATA: 821 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 822 SMBHSTADD(priv)); 823 outb_p(command, SMBHSTCMD(priv)); 824 if (read_write == I2C_SMBUS_WRITE) 825 outb_p(data->byte, SMBHSTDAT0(priv)); 826 xact = I801_BYTE_DATA; 827 break; 828 case I2C_SMBUS_WORD_DATA: 829 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 830 SMBHSTADD(priv)); 831 outb_p(command, SMBHSTCMD(priv)); 832 if (read_write == I2C_SMBUS_WRITE) { 833 outb_p(data->word & 0xff, SMBHSTDAT0(priv)); 834 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); 835 } 836 xact = I801_WORD_DATA; 837 break; 838 case I2C_SMBUS_PROC_CALL: 839 outb_p((addr & 0x7f) << 1, SMBHSTADD(priv)); 840 outb_p(command, SMBHSTCMD(priv)); 841 outb_p(data->word & 0xff, SMBHSTDAT0(priv)); 842 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); 843 xact = I801_PROC_CALL; 844 read_write = I2C_SMBUS_READ; 845 break; 846 case I2C_SMBUS_BLOCK_DATA: 847 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 848 SMBHSTADD(priv)); 849 outb_p(command, SMBHSTCMD(priv)); 850 block = 1; 851 break; 852 case I2C_SMBUS_I2C_BLOCK_DATA: 853 /* 854 * NB: page 240 of ICH5 datasheet shows that the R/#W 855 * bit should be cleared here, even when reading. 856 * However if SPD Write Disable is set (Lynx Point and later), 857 * the read will fail if we don't set the R/#W bit. 858 */ 859 outb_p(((addr & 0x7f) << 1) | 860 ((priv->original_hstcfg & SMBHSTCFG_SPD_WD) ? 861 (read_write & 0x01) : 0), 862 SMBHSTADD(priv)); 863 if (read_write == I2C_SMBUS_READ) { 864 /* NB: page 240 of ICH5 datasheet also shows 865 * that DATA1 is the cmd field when reading */ 866 outb_p(command, SMBHSTDAT1(priv)); 867 } else 868 outb_p(command, SMBHSTCMD(priv)); 869 block = 1; 870 break; 871 case I2C_SMBUS_BLOCK_PROC_CALL: 872 /* 873 * Bit 0 of the slave address register always indicate a write 874 * command. 875 */ 876 outb_p((addr & 0x7f) << 1, SMBHSTADD(priv)); 877 outb_p(command, SMBHSTCMD(priv)); 878 block = 1; 879 break; 880 default: 881 dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n", 882 size); 883 ret = -EOPNOTSUPP; 884 goto out; 885 } 886 887 if (hwpec) /* enable/disable hardware PEC */ 888 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv)); 889 else 890 outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), 891 SMBAUXCTL(priv)); 892 893 if (block) 894 ret = i801_block_transaction(priv, data, read_write, size); 895 else 896 ret = i801_transaction(priv, xact); 897 898 /* Some BIOSes don't like it when PEC is enabled at reboot or resume 899 time, so we forcibly disable it after every transaction. Turn off 900 E32B for the same reason. */ 901 if (hwpec || block) 902 outb_p(inb_p(SMBAUXCTL(priv)) & 903 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 904 905 if (block) 906 goto out; 907 if (ret) 908 goto out; 909 if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) 910 goto out; 911 912 switch (xact) { 913 case I801_BYTE: /* Result put in SMBHSTDAT0 */ 914 case I801_BYTE_DATA: 915 data->byte = inb_p(SMBHSTDAT0(priv)); 916 break; 917 case I801_WORD_DATA: 918 case I801_PROC_CALL: 919 data->word = inb_p(SMBHSTDAT0(priv)) + 920 (inb_p(SMBHSTDAT1(priv)) << 8); 921 break; 922 } 923 924 out: 925 /* 926 * Unlock the SMBus device for use by BIOS/ACPI, 927 * and clear status flags if not done already. 928 */ 929 outb_p(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv)); 930 931 pm_runtime_mark_last_busy(&priv->pci_dev->dev); 932 pm_runtime_put_autosuspend(&priv->pci_dev->dev); 933 mutex_unlock(&priv->acpi_lock); 934 return ret; 935 } 936 937 938 static u32 i801_func(struct i2c_adapter *adapter) 939 { 940 struct i801_priv *priv = i2c_get_adapdata(adapter); 941 942 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 943 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 944 I2C_FUNC_SMBUS_PROC_CALL | 945 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | 946 ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | 947 ((priv->features & FEATURE_BLOCK_PROC) ? 948 I2C_FUNC_SMBUS_BLOCK_PROC_CALL : 0) | 949 ((priv->features & FEATURE_I2C_BLOCK_READ) ? 950 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | 951 ((priv->features & FEATURE_HOST_NOTIFY) ? 952 I2C_FUNC_SMBUS_HOST_NOTIFY : 0); 953 } 954 955 static void i801_enable_host_notify(struct i2c_adapter *adapter) 956 { 957 struct i801_priv *priv = i2c_get_adapdata(adapter); 958 959 if (!(priv->features & FEATURE_HOST_NOTIFY)) 960 return; 961 962 /* 963 * Enable host notify interrupt and block the generation of interrupt 964 * from the SMB_ALERT signal because the driver does not support 965 * SMBus Alert. 966 */ 967 outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE | 968 priv->original_slvcmd, SMBSLVCMD(priv)); 969 970 /* clear Host Notify bit to allow a new notification */ 971 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); 972 } 973 974 static void i801_disable_host_notify(struct i801_priv *priv) 975 { 976 if (!(priv->features & FEATURE_HOST_NOTIFY)) 977 return; 978 979 outb_p(priv->original_slvcmd, SMBSLVCMD(priv)); 980 } 981 982 static const struct i2c_algorithm smbus_algorithm = { 983 .smbus_xfer = i801_access, 984 .functionality = i801_func, 985 }; 986 987 #define FEATURES_ICH5 (FEATURE_BLOCK_PROC | FEATURE_I2C_BLOCK_READ | \ 988 FEATURE_IRQ | FEATURE_SMBUS_PEC | \ 989 FEATURE_BLOCK_BUFFER | FEATURE_HOST_NOTIFY) 990 #define FEATURES_ICH4 (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \ 991 FEATURE_HOST_NOTIFY) 992 993 static const struct pci_device_id i801_ids[] = { 994 { PCI_DEVICE_DATA(INTEL, 82801AA_3, 0) }, 995 { PCI_DEVICE_DATA(INTEL, 82801AB_3, 0) }, 996 { PCI_DEVICE_DATA(INTEL, 82801BA_2, 0) }, 997 { PCI_DEVICE_DATA(INTEL, 82801CA_3, FEATURE_HOST_NOTIFY) }, 998 { PCI_DEVICE_DATA(INTEL, 82801DB_3, FEATURES_ICH4) }, 999 { PCI_DEVICE_DATA(INTEL, 82801EB_3, FEATURES_ICH5) }, 1000 { PCI_DEVICE_DATA(INTEL, ESB_4, FEATURES_ICH5) }, 1001 { PCI_DEVICE_DATA(INTEL, ICH6_16, FEATURES_ICH5) }, 1002 { PCI_DEVICE_DATA(INTEL, ICH7_17, FEATURES_ICH5) }, 1003 { PCI_DEVICE_DATA(INTEL, ESB2_17, FEATURES_ICH5) }, 1004 { PCI_DEVICE_DATA(INTEL, ICH8_5, FEATURES_ICH5) }, 1005 { PCI_DEVICE_DATA(INTEL, ICH9_6, FEATURES_ICH5) }, 1006 { PCI_DEVICE_DATA(INTEL, EP80579_1, FEATURES_ICH5) }, 1007 { PCI_DEVICE_DATA(INTEL, ICH10_4, FEATURES_ICH5) }, 1008 { PCI_DEVICE_DATA(INTEL, ICH10_5, FEATURES_ICH5) }, 1009 { PCI_DEVICE_DATA(INTEL, 5_3400_SERIES_SMBUS, FEATURES_ICH5) }, 1010 { PCI_DEVICE_DATA(INTEL, COUGARPOINT_SMBUS, FEATURES_ICH5) }, 1011 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS, FEATURES_ICH5) }, 1012 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF0, FEATURES_ICH5 | FEATURE_IDF) }, 1013 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF1, FEATURES_ICH5 | FEATURE_IDF) }, 1014 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF2, FEATURES_ICH5 | FEATURE_IDF) }, 1015 { PCI_DEVICE_DATA(INTEL, DH89XXCC_SMBUS, FEATURES_ICH5) }, 1016 { PCI_DEVICE_DATA(INTEL, PANTHERPOINT_SMBUS, FEATURES_ICH5) }, 1017 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_SMBUS, FEATURES_ICH5) }, 1018 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_LP_SMBUS, FEATURES_ICH5) }, 1019 { PCI_DEVICE_DATA(INTEL, AVOTON_SMBUS, FEATURES_ICH5) }, 1020 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS, FEATURES_ICH5) }, 1021 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS0, FEATURES_ICH5 | FEATURE_IDF) }, 1022 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS1, FEATURES_ICH5 | FEATURE_IDF) }, 1023 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS2, FEATURES_ICH5 | FEATURE_IDF) }, 1024 { PCI_DEVICE_DATA(INTEL, COLETOCREEK_SMBUS, FEATURES_ICH5) }, 1025 { PCI_DEVICE_DATA(INTEL, GEMINILAKE_SMBUS, FEATURES_ICH5) }, 1026 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_SMBUS, FEATURES_ICH5) }, 1027 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_LP_SMBUS, FEATURES_ICH5) }, 1028 { PCI_DEVICE_DATA(INTEL, BAYTRAIL_SMBUS, FEATURES_ICH5) }, 1029 { PCI_DEVICE_DATA(INTEL, BRASWELL_SMBUS, FEATURES_ICH5) }, 1030 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1031 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1032 { PCI_DEVICE_DATA(INTEL, CDF_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1033 { PCI_DEVICE_DATA(INTEL, DNV_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1034 { PCI_DEVICE_DATA(INTEL, EBG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1035 { PCI_DEVICE_DATA(INTEL, BROXTON_SMBUS, FEATURES_ICH5) }, 1036 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1037 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SSKU_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1038 { PCI_DEVICE_DATA(INTEL, KABYLAKE_PCH_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1039 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1040 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1041 { PCI_DEVICE_DATA(INTEL, ICELAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1042 { PCI_DEVICE_DATA(INTEL, ICELAKE_N_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1043 { PCI_DEVICE_DATA(INTEL, COMETLAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1044 { PCI_DEVICE_DATA(INTEL, COMETLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1045 { PCI_DEVICE_DATA(INTEL, COMETLAKE_V_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1046 { PCI_DEVICE_DATA(INTEL, ELKHART_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1047 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1048 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1049 { PCI_DEVICE_DATA(INTEL, JASPER_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1050 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1051 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1052 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_M_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1053 { PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1054 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1055 { 0, } 1056 }; 1057 1058 MODULE_DEVICE_TABLE(pci, i801_ids); 1059 1060 #if defined CONFIG_X86 && defined CONFIG_DMI 1061 static unsigned char apanel_addr; 1062 1063 /* Scan the system ROM for the signature "FJKEYINF" */ 1064 static __init const void __iomem *bios_signature(const void __iomem *bios) 1065 { 1066 ssize_t offset; 1067 const unsigned char signature[] = "FJKEYINF"; 1068 1069 for (offset = 0; offset < 0x10000; offset += 0x10) { 1070 if (check_signature(bios + offset, signature, 1071 sizeof(signature)-1)) 1072 return bios + offset; 1073 } 1074 return NULL; 1075 } 1076 1077 static void __init input_apanel_init(void) 1078 { 1079 void __iomem *bios; 1080 const void __iomem *p; 1081 1082 bios = ioremap(0xF0000, 0x10000); /* Can't fail */ 1083 p = bios_signature(bios); 1084 if (p) { 1085 /* just use the first address */ 1086 apanel_addr = readb(p + 8 + 3) >> 1; 1087 } 1088 iounmap(bios); 1089 } 1090 1091 struct dmi_onboard_device_info { 1092 const char *name; 1093 u8 type; 1094 unsigned short i2c_addr; 1095 const char *i2c_type; 1096 }; 1097 1098 static const struct dmi_onboard_device_info dmi_devices[] = { 1099 { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" }, 1100 { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" }, 1101 { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" }, 1102 }; 1103 1104 static void dmi_check_onboard_device(u8 type, const char *name, 1105 struct i2c_adapter *adap) 1106 { 1107 int i; 1108 struct i2c_board_info info; 1109 1110 for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) { 1111 /* & ~0x80, ignore enabled/disabled bit */ 1112 if ((type & ~0x80) != dmi_devices[i].type) 1113 continue; 1114 if (strcasecmp(name, dmi_devices[i].name)) 1115 continue; 1116 1117 memset(&info, 0, sizeof(struct i2c_board_info)); 1118 info.addr = dmi_devices[i].i2c_addr; 1119 strscpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE); 1120 i2c_new_client_device(adap, &info); 1121 break; 1122 } 1123 } 1124 1125 /* We use our own function to check for onboard devices instead of 1126 dmi_find_device() as some buggy BIOS's have the devices we are interested 1127 in marked as disabled */ 1128 static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap) 1129 { 1130 int i, count; 1131 1132 if (dm->type != 10) 1133 return; 1134 1135 count = (dm->length - sizeof(struct dmi_header)) / 2; 1136 for (i = 0; i < count; i++) { 1137 const u8 *d = (char *)(dm + 1) + (i * 2); 1138 const char *name = ((char *) dm) + dm->length; 1139 u8 type = d[0]; 1140 u8 s = d[1]; 1141 1142 if (!s) 1143 continue; 1144 s--; 1145 while (s > 0 && name[0]) { 1146 name += strlen(name) + 1; 1147 s--; 1148 } 1149 if (name[0] == 0) /* Bogus string reference */ 1150 continue; 1151 1152 dmi_check_onboard_device(type, name, adap); 1153 } 1154 } 1155 1156 /* NOTE: Keep this list in sync with drivers/platform/x86/dell-smo8800.c */ 1157 static const char *const acpi_smo8800_ids[] = { 1158 "SMO8800", 1159 "SMO8801", 1160 "SMO8810", 1161 "SMO8811", 1162 "SMO8820", 1163 "SMO8821", 1164 "SMO8830", 1165 "SMO8831", 1166 }; 1167 1168 static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle, 1169 u32 nesting_level, 1170 void *context, 1171 void **return_value) 1172 { 1173 struct acpi_device_info *info; 1174 acpi_status status; 1175 char *hid; 1176 int i; 1177 1178 status = acpi_get_object_info(obj_handle, &info); 1179 if (ACPI_FAILURE(status)) 1180 return AE_OK; 1181 1182 if (!(info->valid & ACPI_VALID_HID)) 1183 goto smo88xx_not_found; 1184 1185 hid = info->hardware_id.string; 1186 if (!hid) 1187 goto smo88xx_not_found; 1188 1189 i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid); 1190 if (i < 0) 1191 goto smo88xx_not_found; 1192 1193 kfree(info); 1194 1195 *return_value = NULL; 1196 return AE_CTRL_TERMINATE; 1197 1198 smo88xx_not_found: 1199 kfree(info); 1200 return AE_OK; 1201 } 1202 1203 static bool is_dell_system_with_lis3lv02d(void) 1204 { 1205 void *err = ERR_PTR(-ENOENT); 1206 1207 if (!dmi_match(DMI_SYS_VENDOR, "Dell Inc.")) 1208 return false; 1209 1210 /* 1211 * Check that ACPI device SMO88xx is present and is functioning. 1212 * Function acpi_get_devices() already filters all ACPI devices 1213 * which are not present or are not functioning. 1214 * ACPI device SMO88xx represents our ST microelectronics lis3lv02d 1215 * accelerometer but unfortunately ACPI does not provide any other 1216 * information (like I2C address). 1217 */ 1218 acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, &err); 1219 1220 return !IS_ERR(err); 1221 } 1222 1223 /* 1224 * Accelerometer's I2C address is not specified in DMI nor ACPI, 1225 * so it is needed to define mapping table based on DMI product names. 1226 */ 1227 static const struct { 1228 const char *dmi_product_name; 1229 unsigned short i2c_addr; 1230 } dell_lis3lv02d_devices[] = { 1231 /* 1232 * Dell platform team told us that these Latitude devices have 1233 * ST microelectronics accelerometer at I2C address 0x29. 1234 */ 1235 { "Latitude E5250", 0x29 }, 1236 { "Latitude E5450", 0x29 }, 1237 { "Latitude E5550", 0x29 }, 1238 { "Latitude E6440", 0x29 }, 1239 { "Latitude E6440 ATG", 0x29 }, 1240 { "Latitude E6540", 0x29 }, 1241 /* 1242 * Additional individual entries were added after verification. 1243 */ 1244 { "Latitude 5480", 0x29 }, 1245 { "Vostro V131", 0x1d }, 1246 }; 1247 1248 static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv) 1249 { 1250 struct i2c_board_info info; 1251 const char *dmi_product_name; 1252 int i; 1253 1254 dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); 1255 for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) { 1256 if (strcmp(dmi_product_name, 1257 dell_lis3lv02d_devices[i].dmi_product_name) == 0) 1258 break; 1259 } 1260 1261 if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) { 1262 dev_warn(&priv->pci_dev->dev, 1263 "Accelerometer lis3lv02d is present on SMBus but its" 1264 " address is unknown, skipping registration\n"); 1265 return; 1266 } 1267 1268 memset(&info, 0, sizeof(struct i2c_board_info)); 1269 info.addr = dell_lis3lv02d_devices[i].i2c_addr; 1270 strscpy(info.type, "lis3lv02d", I2C_NAME_SIZE); 1271 i2c_new_client_device(&priv->adapter, &info); 1272 } 1273 1274 /* Register optional slaves */ 1275 static void i801_probe_optional_slaves(struct i801_priv *priv) 1276 { 1277 /* Only register slaves on main SMBus channel */ 1278 if (priv->features & FEATURE_IDF) 1279 return; 1280 1281 if (apanel_addr) { 1282 struct i2c_board_info info = { 1283 .addr = apanel_addr, 1284 .type = "fujitsu_apanel", 1285 }; 1286 1287 i2c_new_client_device(&priv->adapter, &info); 1288 } 1289 1290 if (dmi_name_in_vendors("FUJITSU")) 1291 dmi_walk(dmi_check_onboard_devices, &priv->adapter); 1292 1293 if (is_dell_system_with_lis3lv02d()) 1294 register_dell_lis3lv02d_i2c_device(priv); 1295 1296 /* Instantiate SPD EEPROMs unless the SMBus is multiplexed */ 1297 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) 1298 if (!priv->mux_drvdata) 1299 #endif 1300 i2c_register_spd(&priv->adapter); 1301 } 1302 #else 1303 static void __init input_apanel_init(void) {} 1304 static void i801_probe_optional_slaves(struct i801_priv *priv) {} 1305 #endif /* CONFIG_X86 && CONFIG_DMI */ 1306 1307 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI 1308 static struct i801_mux_config i801_mux_config_asus_z8_d12 = { 1309 .gpio_chip = "gpio_ich", 1310 .values = { 0x02, 0x03 }, 1311 .n_values = 2, 1312 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD }, 1313 .gpios = { 52, 53 }, 1314 .n_gpios = 2, 1315 }; 1316 1317 static struct i801_mux_config i801_mux_config_asus_z8_d18 = { 1318 .gpio_chip = "gpio_ich", 1319 .values = { 0x02, 0x03, 0x01 }, 1320 .n_values = 3, 1321 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD }, 1322 .gpios = { 52, 53 }, 1323 .n_gpios = 2, 1324 }; 1325 1326 static const struct dmi_system_id mux_dmi_table[] = { 1327 { 1328 .matches = { 1329 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1330 DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"), 1331 }, 1332 .driver_data = &i801_mux_config_asus_z8_d12, 1333 }, 1334 { 1335 .matches = { 1336 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1337 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"), 1338 }, 1339 .driver_data = &i801_mux_config_asus_z8_d12, 1340 }, 1341 { 1342 .matches = { 1343 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1344 DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"), 1345 }, 1346 .driver_data = &i801_mux_config_asus_z8_d12, 1347 }, 1348 { 1349 .matches = { 1350 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1351 DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"), 1352 }, 1353 .driver_data = &i801_mux_config_asus_z8_d12, 1354 }, 1355 { 1356 .matches = { 1357 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1358 DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"), 1359 }, 1360 .driver_data = &i801_mux_config_asus_z8_d12, 1361 }, 1362 { 1363 .matches = { 1364 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1365 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"), 1366 }, 1367 .driver_data = &i801_mux_config_asus_z8_d12, 1368 }, 1369 { 1370 .matches = { 1371 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1372 DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"), 1373 }, 1374 .driver_data = &i801_mux_config_asus_z8_d18, 1375 }, 1376 { 1377 .matches = { 1378 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1379 DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"), 1380 }, 1381 .driver_data = &i801_mux_config_asus_z8_d18, 1382 }, 1383 { 1384 .matches = { 1385 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1386 DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"), 1387 }, 1388 .driver_data = &i801_mux_config_asus_z8_d12, 1389 }, 1390 { } 1391 }; 1392 1393 /* Setup multiplexing if needed */ 1394 static void i801_add_mux(struct i801_priv *priv) 1395 { 1396 struct device *dev = &priv->adapter.dev; 1397 const struct i801_mux_config *mux_config; 1398 struct i2c_mux_gpio_platform_data gpio_data; 1399 struct gpiod_lookup_table *lookup; 1400 int i; 1401 1402 if (!priv->mux_drvdata) 1403 return; 1404 mux_config = priv->mux_drvdata; 1405 1406 /* Prepare the platform data */ 1407 memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data)); 1408 gpio_data.parent = priv->adapter.nr; 1409 gpio_data.values = mux_config->values; 1410 gpio_data.n_values = mux_config->n_values; 1411 gpio_data.classes = mux_config->classes; 1412 gpio_data.idle = I2C_MUX_GPIO_NO_IDLE; 1413 1414 /* Register GPIO descriptor lookup table */ 1415 lookup = devm_kzalloc(dev, 1416 struct_size(lookup, table, mux_config->n_gpios + 1), 1417 GFP_KERNEL); 1418 if (!lookup) 1419 return; 1420 lookup->dev_id = "i2c-mux-gpio"; 1421 for (i = 0; i < mux_config->n_gpios; i++) 1422 lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip, 1423 mux_config->gpios[i], "mux", 0); 1424 gpiod_add_lookup_table(lookup); 1425 priv->lookup = lookup; 1426 1427 /* 1428 * Register the mux device, we use PLATFORM_DEVID_NONE here 1429 * because since we are referring to the GPIO chip by name we are 1430 * anyways in deep trouble if there is more than one of these 1431 * devices, and there should likely only be one platform controller 1432 * hub. 1433 */ 1434 priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio", 1435 PLATFORM_DEVID_NONE, &gpio_data, 1436 sizeof(struct i2c_mux_gpio_platform_data)); 1437 if (IS_ERR(priv->mux_pdev)) { 1438 gpiod_remove_lookup_table(lookup); 1439 dev_err(dev, "Failed to register i2c-mux-gpio device\n"); 1440 } 1441 } 1442 1443 static void i801_del_mux(struct i801_priv *priv) 1444 { 1445 platform_device_unregister(priv->mux_pdev); 1446 gpiod_remove_lookup_table(priv->lookup); 1447 } 1448 1449 static unsigned int i801_get_adapter_class(struct i801_priv *priv) 1450 { 1451 const struct dmi_system_id *id; 1452 const struct i801_mux_config *mux_config; 1453 unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD; 1454 int i; 1455 1456 id = dmi_first_match(mux_dmi_table); 1457 if (id) { 1458 /* Remove branch classes from trunk */ 1459 mux_config = id->driver_data; 1460 for (i = 0; i < mux_config->n_values; i++) 1461 class &= ~mux_config->classes[i]; 1462 1463 /* Remember for later */ 1464 priv->mux_drvdata = mux_config; 1465 } 1466 1467 return class; 1468 } 1469 #else 1470 static inline void i801_add_mux(struct i801_priv *priv) { } 1471 static inline void i801_del_mux(struct i801_priv *priv) { } 1472 1473 static inline unsigned int i801_get_adapter_class(struct i801_priv *priv) 1474 { 1475 return I2C_CLASS_HWMON | I2C_CLASS_SPD; 1476 } 1477 #endif 1478 1479 static struct platform_device * 1480 i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, 1481 struct resource *tco_res) 1482 { 1483 static const struct itco_wdt_platform_data pldata = { 1484 .name = "Intel PCH", 1485 .version = 4, 1486 }; 1487 struct resource *res; 1488 int ret; 1489 1490 /* 1491 * We must access the NO_REBOOT bit over the Primary to Sideband 1492 * (P2SB) bridge. 1493 */ 1494 1495 res = &tco_res[1]; 1496 ret = p2sb_bar(pci_dev->bus, 0, res); 1497 if (ret) 1498 return ERR_PTR(ret); 1499 1500 if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS) 1501 res->start += SBREG_SMBCTRL_DNV; 1502 else 1503 res->start += SBREG_SMBCTRL; 1504 1505 res->end = res->start + 3; 1506 1507 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, 1508 tco_res, 2, &pldata, sizeof(pldata)); 1509 } 1510 1511 static struct platform_device * 1512 i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev, 1513 struct resource *tco_res) 1514 { 1515 static const struct itco_wdt_platform_data pldata = { 1516 .name = "Intel PCH", 1517 .version = 6, 1518 }; 1519 1520 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, 1521 tco_res, 1, &pldata, sizeof(pldata)); 1522 } 1523 1524 static void i801_add_tco(struct i801_priv *priv) 1525 { 1526 struct pci_dev *pci_dev = priv->pci_dev; 1527 struct resource tco_res[2], *res; 1528 u32 tco_base, tco_ctl; 1529 1530 /* If we have ACPI based watchdog use that instead */ 1531 if (acpi_has_watchdog()) 1532 return; 1533 1534 if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL))) 1535 return; 1536 1537 pci_read_config_dword(pci_dev, TCOBASE, &tco_base); 1538 pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl); 1539 if (!(tco_ctl & TCOCTL_EN)) 1540 return; 1541 1542 memset(tco_res, 0, sizeof(tco_res)); 1543 /* 1544 * Always populate the main iTCO IO resource here. The second entry 1545 * for NO_REBOOT MMIO is filled by the SPT specific function. 1546 */ 1547 res = &tco_res[0]; 1548 res->start = tco_base & ~1; 1549 res->end = res->start + 32 - 1; 1550 res->flags = IORESOURCE_IO; 1551 1552 if (priv->features & FEATURE_TCO_CNL) 1553 priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res); 1554 else 1555 priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res); 1556 1557 if (IS_ERR(priv->tco_pdev)) 1558 dev_warn(&pci_dev->dev, "failed to create iTCO device\n"); 1559 } 1560 1561 #ifdef CONFIG_ACPI 1562 static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv, 1563 acpi_physical_address address) 1564 { 1565 return address >= priv->smba && 1566 address <= pci_resource_end(priv->pci_dev, SMBBAR); 1567 } 1568 1569 static acpi_status 1570 i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, 1571 u64 *value, void *handler_context, void *region_context) 1572 { 1573 struct i801_priv *priv = handler_context; 1574 struct pci_dev *pdev = priv->pci_dev; 1575 acpi_status status; 1576 1577 /* 1578 * Once BIOS AML code touches the OpRegion we warn and inhibit any 1579 * further access from the driver itself. This device is now owned 1580 * by the system firmware. 1581 */ 1582 mutex_lock(&priv->acpi_lock); 1583 1584 if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) { 1585 priv->acpi_reserved = true; 1586 1587 dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n"); 1588 dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n"); 1589 1590 /* 1591 * BIOS is accessing the host controller so prevent it from 1592 * suspending automatically from now on. 1593 */ 1594 pm_runtime_get_sync(&pdev->dev); 1595 } 1596 1597 if ((function & ACPI_IO_MASK) == ACPI_READ) 1598 status = acpi_os_read_port(address, (u32 *)value, bits); 1599 else 1600 status = acpi_os_write_port(address, (u32)*value, bits); 1601 1602 mutex_unlock(&priv->acpi_lock); 1603 1604 return status; 1605 } 1606 1607 static int i801_acpi_probe(struct i801_priv *priv) 1608 { 1609 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev); 1610 acpi_status status; 1611 1612 status = acpi_install_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, 1613 i801_acpi_io_handler, NULL, priv); 1614 if (ACPI_SUCCESS(status)) 1615 return 0; 1616 1617 return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]); 1618 } 1619 1620 static void i801_acpi_remove(struct i801_priv *priv) 1621 { 1622 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev); 1623 1624 acpi_remove_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler); 1625 } 1626 #else 1627 static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; } 1628 static inline void i801_acpi_remove(struct i801_priv *priv) { } 1629 #endif 1630 1631 static void i801_setup_hstcfg(struct i801_priv *priv) 1632 { 1633 unsigned char hstcfg = priv->original_hstcfg; 1634 1635 hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ 1636 hstcfg |= SMBHSTCFG_HST_EN; 1637 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg); 1638 } 1639 1640 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) 1641 { 1642 int err, i; 1643 struct i801_priv *priv; 1644 1645 priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL); 1646 if (!priv) 1647 return -ENOMEM; 1648 1649 i2c_set_adapdata(&priv->adapter, priv); 1650 priv->adapter.owner = THIS_MODULE; 1651 priv->adapter.class = i801_get_adapter_class(priv); 1652 priv->adapter.algo = &smbus_algorithm; 1653 priv->adapter.dev.parent = &dev->dev; 1654 ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev)); 1655 priv->adapter.retries = 3; 1656 mutex_init(&priv->acpi_lock); 1657 1658 priv->pci_dev = dev; 1659 priv->features = id->driver_data; 1660 1661 /* Disable features on user request */ 1662 for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { 1663 if (priv->features & disable_features & (1 << i)) 1664 dev_notice(&dev->dev, "%s disabled by user\n", 1665 i801_feature_names[i]); 1666 } 1667 priv->features &= ~disable_features; 1668 1669 err = pcim_enable_device(dev); 1670 if (err) { 1671 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n", 1672 err); 1673 return err; 1674 } 1675 pcim_pin_device(dev); 1676 1677 /* Determine the address of the SMBus area */ 1678 priv->smba = pci_resource_start(dev, SMBBAR); 1679 if (!priv->smba) { 1680 dev_err(&dev->dev, 1681 "SMBus base address uninitialized, upgrade BIOS\n"); 1682 return -ENODEV; 1683 } 1684 1685 if (i801_acpi_probe(priv)) 1686 return -ENODEV; 1687 1688 err = pcim_iomap_regions(dev, 1 << SMBBAR, DRV_NAME); 1689 if (err) { 1690 dev_err(&dev->dev, 1691 "Failed to request SMBus region 0x%lx-0x%Lx\n", 1692 priv->smba, 1693 (unsigned long long)pci_resource_end(dev, SMBBAR)); 1694 i801_acpi_remove(priv); 1695 return err; 1696 } 1697 1698 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg); 1699 i801_setup_hstcfg(priv); 1700 if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN)) 1701 dev_info(&dev->dev, "Enabling SMBus device\n"); 1702 1703 if (priv->original_hstcfg & SMBHSTCFG_SMB_SMI_EN) { 1704 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); 1705 /* Disable SMBus interrupt feature if SMBus using SMI# */ 1706 priv->features &= ~FEATURE_IRQ; 1707 } 1708 if (priv->original_hstcfg & SMBHSTCFG_SPD_WD) 1709 dev_info(&dev->dev, "SPD Write Disable is set\n"); 1710 1711 /* Clear special mode bits */ 1712 if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) 1713 outb_p(inb_p(SMBAUXCTL(priv)) & 1714 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 1715 1716 /* Remember original Interrupt and Host Notify settings */ 1717 priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL; 1718 if (priv->features & FEATURE_HOST_NOTIFY) 1719 priv->original_slvcmd = inb_p(SMBSLVCMD(priv)); 1720 1721 /* Default timeout in interrupt mode: 200 ms */ 1722 priv->adapter.timeout = HZ / 5; 1723 1724 if (dev->irq == IRQ_NOTCONNECTED) 1725 priv->features &= ~FEATURE_IRQ; 1726 1727 if (priv->features & FEATURE_IRQ) { 1728 u16 pcists; 1729 1730 /* Complain if an interrupt is already pending */ 1731 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists); 1732 if (pcists & PCI_STATUS_INTERRUPT) 1733 dev_warn(&dev->dev, "An interrupt is pending!\n"); 1734 } 1735 1736 if (priv->features & FEATURE_IRQ) { 1737 init_completion(&priv->done); 1738 1739 err = devm_request_irq(&dev->dev, dev->irq, i801_isr, 1740 IRQF_SHARED, DRV_NAME, priv); 1741 if (err) { 1742 dev_err(&dev->dev, "Failed to allocate irq %d: %d\n", 1743 dev->irq, err); 1744 priv->features &= ~FEATURE_IRQ; 1745 } 1746 } 1747 dev_info(&dev->dev, "SMBus using %s\n", 1748 priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling"); 1749 1750 i801_add_tco(priv); 1751 1752 snprintf(priv->adapter.name, sizeof(priv->adapter.name), 1753 "SMBus I801 adapter at %04lx", priv->smba); 1754 err = i2c_add_adapter(&priv->adapter); 1755 if (err) { 1756 i801_acpi_remove(priv); 1757 return err; 1758 } 1759 1760 i801_enable_host_notify(&priv->adapter); 1761 1762 i801_probe_optional_slaves(priv); 1763 /* We ignore errors - multiplexing is optional */ 1764 i801_add_mux(priv); 1765 1766 pci_set_drvdata(dev, priv); 1767 1768 dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE); 1769 pm_runtime_set_autosuspend_delay(&dev->dev, 1000); 1770 pm_runtime_use_autosuspend(&dev->dev); 1771 pm_runtime_put_autosuspend(&dev->dev); 1772 pm_runtime_allow(&dev->dev); 1773 1774 return 0; 1775 } 1776 1777 static void i801_remove(struct pci_dev *dev) 1778 { 1779 struct i801_priv *priv = pci_get_drvdata(dev); 1780 1781 outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); 1782 i801_disable_host_notify(priv); 1783 i801_del_mux(priv); 1784 i2c_del_adapter(&priv->adapter); 1785 i801_acpi_remove(priv); 1786 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 1787 1788 platform_device_unregister(priv->tco_pdev); 1789 1790 /* if acpi_reserved is set then usage_count is incremented already */ 1791 if (!priv->acpi_reserved) 1792 pm_runtime_get_noresume(&dev->dev); 1793 1794 /* 1795 * do not call pci_disable_device(dev) since it can cause hard hangs on 1796 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) 1797 */ 1798 } 1799 1800 static void i801_shutdown(struct pci_dev *dev) 1801 { 1802 struct i801_priv *priv = pci_get_drvdata(dev); 1803 1804 /* Restore config registers to avoid hard hang on some systems */ 1805 outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); 1806 i801_disable_host_notify(priv); 1807 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 1808 } 1809 1810 #ifdef CONFIG_PM_SLEEP 1811 static int i801_suspend(struct device *dev) 1812 { 1813 struct i801_priv *priv = dev_get_drvdata(dev); 1814 1815 outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); 1816 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg); 1817 return 0; 1818 } 1819 1820 static int i801_resume(struct device *dev) 1821 { 1822 struct i801_priv *priv = dev_get_drvdata(dev); 1823 1824 i801_setup_hstcfg(priv); 1825 i801_enable_host_notify(&priv->adapter); 1826 1827 return 0; 1828 } 1829 #endif 1830 1831 static SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume); 1832 1833 static struct pci_driver i801_driver = { 1834 .name = DRV_NAME, 1835 .id_table = i801_ids, 1836 .probe = i801_probe, 1837 .remove = i801_remove, 1838 .shutdown = i801_shutdown, 1839 .driver = { 1840 .pm = &i801_pm_ops, 1841 }, 1842 }; 1843 1844 static int __init i2c_i801_init(void) 1845 { 1846 if (dmi_name_in_vendors("FUJITSU")) 1847 input_apanel_init(); 1848 return pci_register_driver(&i801_driver); 1849 } 1850 1851 static void __exit i2c_i801_exit(void) 1852 { 1853 pci_unregister_driver(&i801_driver); 1854 } 1855 1856 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); 1857 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); 1858 MODULE_DESCRIPTION("I801 SMBus driver"); 1859 MODULE_LICENSE("GPL"); 1860 1861 module_init(i2c_i801_init); 1862 module_exit(i2c_i801_exit); 1863