1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* ------------------------------------------------------------------------- */ 3 /* i2c-elektor.c i2c-hw access for PCF8584 style isa bus adaptes */ 4 /* ------------------------------------------------------------------------- */ 5 /* Copyright (C) 1995-97 Simon G. Vogl 6 1998-99 Hans Berglund 7 8 */ 9 /* ------------------------------------------------------------------------- */ 10 11 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even 12 Frodo Looijaard <frodol@dds.nl> */ 13 14 /* Partially rewriten by Oleg I. Vdovikin for mmapped support of 15 for Alpha Processor Inc. UP-2000(+) boards */ 16 17 #include <linux/kernel.h> 18 #include <linux/ioport.h> 19 #include <linux/module.h> 20 #include <linux/delay.h> 21 #include <linux/init.h> 22 #include <linux/interrupt.h> 23 #include <linux/pci.h> 24 #include <linux/wait.h> 25 26 #include <linux/isa.h> 27 #include <linux/i2c.h> 28 #include <linux/i2c-algo-pcf.h> 29 #include <linux/io.h> 30 31 #include <asm/irq.h> 32 33 #include "../algos/i2c-algo-pcf.h" 34 35 #define DEFAULT_BASE 0x330 36 37 static int base; 38 static u8 __iomem *base_iomem; 39 40 static int irq; 41 static int clock = 0x1c; 42 static int own = 0x55; 43 static int mmapped; 44 45 /* vdovikin: removed static struct i2c_pcf_isa gpi; code - 46 this module in real supports only one device, due to missing arguments 47 in some functions, called from the algo-pcf module. Sometimes it's 48 need to be rewriten - but for now just remove this for simpler reading */ 49 50 static wait_queue_head_t pcf_wait; 51 static int pcf_pending; 52 static DEFINE_SPINLOCK(lock); 53 54 static struct i2c_adapter pcf_isa_ops; 55 56 /* ----- local functions ---------------------------------------------- */ 57 58 static void pcf_isa_setbyte(void *data, int ctl, int val) 59 { 60 u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; 61 62 /* enable irq if any specified for serial operation */ 63 if (ctl && irq && (val & I2C_PCF_ESO)) { 64 val |= I2C_PCF_ENI; 65 } 66 67 pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val); 68 iowrite8(val, address); 69 #ifdef __alpha__ 70 /* API UP2000 needs some hardware fudging to make the write stick */ 71 iowrite8(val, address); 72 #endif 73 } 74 75 static int pcf_isa_getbyte(void *data, int ctl) 76 { 77 u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; 78 int val = ioread8(address); 79 80 pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val); 81 return (val); 82 } 83 84 static int pcf_isa_getown(void *data) 85 { 86 return (own); 87 } 88 89 90 static int pcf_isa_getclock(void *data) 91 { 92 return (clock); 93 } 94 95 static void pcf_isa_waitforpin(void *data) 96 { 97 DEFINE_WAIT(wait); 98 int timeout = 2; 99 unsigned long flags; 100 101 if (irq > 0) { 102 spin_lock_irqsave(&lock, flags); 103 if (pcf_pending == 0) { 104 spin_unlock_irqrestore(&lock, flags); 105 prepare_to_wait(&pcf_wait, &wait, TASK_INTERRUPTIBLE); 106 if (schedule_timeout(timeout*HZ)) { 107 spin_lock_irqsave(&lock, flags); 108 if (pcf_pending == 1) { 109 pcf_pending = 0; 110 } 111 spin_unlock_irqrestore(&lock, flags); 112 } 113 finish_wait(&pcf_wait, &wait); 114 } else { 115 pcf_pending = 0; 116 spin_unlock_irqrestore(&lock, flags); 117 } 118 } else { 119 udelay(100); 120 } 121 } 122 123 124 static irqreturn_t pcf_isa_handler(int this_irq, void *dev_id) { 125 spin_lock(&lock); 126 pcf_pending = 1; 127 spin_unlock(&lock); 128 wake_up_interruptible(&pcf_wait); 129 return IRQ_HANDLED; 130 } 131 132 133 static int pcf_isa_init(void) 134 { 135 if (!mmapped) { 136 if (!request_region(base, 2, pcf_isa_ops.name)) { 137 printk(KERN_ERR "%s: requested I/O region (%#x:2) is " 138 "in use\n", pcf_isa_ops.name, base); 139 return -ENODEV; 140 } 141 base_iomem = ioport_map(base, 2); 142 if (!base_iomem) { 143 printk(KERN_ERR "%s: remap of I/O region %#x failed\n", 144 pcf_isa_ops.name, base); 145 release_region(base, 2); 146 return -ENODEV; 147 } 148 } else { 149 if (!request_mem_region(base, 2, pcf_isa_ops.name)) { 150 printk(KERN_ERR "%s: requested memory region (%#x:2) " 151 "is in use\n", pcf_isa_ops.name, base); 152 return -ENODEV; 153 } 154 base_iomem = ioremap(base, 2); 155 if (base_iomem == NULL) { 156 printk(KERN_ERR "%s: remap of memory region %#x " 157 "failed\n", pcf_isa_ops.name, base); 158 release_mem_region(base, 2); 159 return -ENODEV; 160 } 161 } 162 pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base, 163 base_iomem); 164 165 if (irq > 0) { 166 if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name, 167 NULL) < 0) { 168 printk(KERN_ERR "%s: Request irq%d failed\n", 169 pcf_isa_ops.name, irq); 170 irq = 0; 171 } else 172 enable_irq(irq); 173 } 174 return 0; 175 } 176 177 /* ------------------------------------------------------------------------ 178 * Encapsulate the above functions in the correct operations structure. 179 * This is only done when more than one hardware adapter is supported. 180 */ 181 static struct i2c_algo_pcf_data pcf_isa_data = { 182 .setpcf = pcf_isa_setbyte, 183 .getpcf = pcf_isa_getbyte, 184 .getown = pcf_isa_getown, 185 .getclock = pcf_isa_getclock, 186 .waitforpin = pcf_isa_waitforpin, 187 }; 188 189 static struct i2c_adapter pcf_isa_ops = { 190 .owner = THIS_MODULE, 191 .class = I2C_CLASS_HWMON, 192 .algo_data = &pcf_isa_data, 193 .name = "i2c-elektor", 194 }; 195 196 static int elektor_match(struct device *dev, unsigned int id) 197 { 198 #ifdef __alpha__ 199 /* check to see we have memory mapped PCF8584 connected to the 200 Cypress cy82c693 PCI-ISA bridge as on UP2000 board */ 201 if (base == 0) { 202 struct pci_dev *cy693_dev; 203 204 cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, 205 PCI_DEVICE_ID_CONTAQ_82C693, NULL); 206 if (cy693_dev) { 207 unsigned char config; 208 /* yeap, we've found cypress, let's check config */ 209 if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { 210 211 dev_dbg(dev, "found cy82c693, config " 212 "register 0x47 = 0x%02x\n", config); 213 214 /* UP2000 board has this register set to 0xe1, 215 but the most significant bit as seems can be 216 reset during the proper initialisation 217 sequence if guys from API decides to do that 218 (so, we can even enable Tsunami Pchip 219 window for the upper 1 Gb) */ 220 221 /* so just check for ROMCS at 0xe0000, 222 ROMCS enabled for writes 223 and external XD Bus buffer in use. */ 224 if ((config & 0x7f) == 0x61) { 225 /* seems to be UP2000 like board */ 226 base = 0xe0000; 227 mmapped = 1; 228 /* UP2000 drives ISA with 229 8.25 MHz (PCI/4) clock 230 (this can be read from cypress) */ 231 clock = I2C_PCF_CLK | I2C_PCF_TRNS90; 232 dev_info(dev, "found API UP2000 like " 233 "board, will probe PCF8584 " 234 "later\n"); 235 } 236 } 237 pci_dev_put(cy693_dev); 238 } 239 } 240 #endif 241 242 /* sanity checks for mmapped I/O */ 243 if (mmapped && base < 0xc8000) { 244 dev_err(dev, "incorrect base address (%#x) specified " 245 "for mmapped I/O\n", base); 246 return 0; 247 } 248 249 if (base == 0) { 250 base = DEFAULT_BASE; 251 } 252 return 1; 253 } 254 255 static int elektor_probe(struct device *dev, unsigned int id) 256 { 257 init_waitqueue_head(&pcf_wait); 258 if (pcf_isa_init()) 259 return -ENODEV; 260 pcf_isa_ops.dev.parent = dev; 261 if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) 262 goto fail; 263 264 dev_info(dev, "found device at %#x\n", base); 265 266 return 0; 267 268 fail: 269 if (irq > 0) { 270 disable_irq(irq); 271 free_irq(irq, NULL); 272 } 273 274 if (!mmapped) { 275 ioport_unmap(base_iomem); 276 release_region(base, 2); 277 } else { 278 iounmap(base_iomem); 279 release_mem_region(base, 2); 280 } 281 return -ENODEV; 282 } 283 284 static void elektor_remove(struct device *dev, unsigned int id) 285 { 286 i2c_del_adapter(&pcf_isa_ops); 287 288 if (irq > 0) { 289 disable_irq(irq); 290 free_irq(irq, NULL); 291 } 292 293 if (!mmapped) { 294 ioport_unmap(base_iomem); 295 release_region(base, 2); 296 } else { 297 iounmap(base_iomem); 298 release_mem_region(base, 2); 299 } 300 } 301 302 static struct isa_driver i2c_elektor_driver = { 303 .match = elektor_match, 304 .probe = elektor_probe, 305 .remove = elektor_remove, 306 .driver = { 307 .owner = THIS_MODULE, 308 .name = "i2c-elektor", 309 }, 310 }; 311 312 MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>"); 313 MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter"); 314 MODULE_LICENSE("GPL"); 315 316 module_param_hw(base, int, ioport_or_iomem, 0); 317 module_param_hw(irq, int, irq, 0); 318 module_param(clock, int, 0); 319 module_param(own, int, 0); 320 module_param_hw(mmapped, int, other, 0); 321 module_isa_driver(i2c_elektor_driver, 1); 322