1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Synopsys DesignWare I2C adapter driver. 4 * 5 * Based on the TI DAVINCI I2C adapter driver. 6 * 7 * Copyright (C) 2006 Texas Instruments. 8 * Copyright (C) 2007 MontaVista Software Inc. 9 * Copyright (C) 2009 Provigent Ltd. 10 */ 11 #include <linux/clk-provider.h> 12 #include <linux/clk.h> 13 #include <linux/delay.h> 14 #include <linux/dmi.h> 15 #include <linux/err.h> 16 #include <linux/errno.h> 17 #include <linux/i2c.h> 18 #include <linux/interrupt.h> 19 #include <linux/io.h> 20 #include <linux/kernel.h> 21 #include <linux/mfd/syscon.h> 22 #include <linux/module.h> 23 #include <linux/platform_device.h> 24 #include <linux/pm.h> 25 #include <linux/pm_runtime.h> 26 #include <linux/property.h> 27 #include <linux/regmap.h> 28 #include <linux/reset.h> 29 #include <linux/sched.h> 30 #include <linux/slab.h> 31 #include <linux/units.h> 32 33 #include "i2c-designware-core.h" 34 35 static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev) 36 { 37 return clk_get_rate(dev->clk) / KILO; 38 } 39 40 #ifdef CONFIG_OF 41 #define BT1_I2C_CTL 0x100 42 #define BT1_I2C_CTL_ADDR_MASK GENMASK(7, 0) 43 #define BT1_I2C_CTL_WR BIT(8) 44 #define BT1_I2C_CTL_GO BIT(31) 45 #define BT1_I2C_DI 0x104 46 #define BT1_I2C_DO 0x108 47 48 static int bt1_i2c_read(void *context, unsigned int reg, unsigned int *val) 49 { 50 struct dw_i2c_dev *dev = context; 51 int ret; 52 53 /* 54 * Note these methods shouldn't ever fail because the system controller 55 * registers are memory mapped. We check the return value just in case. 56 */ 57 ret = regmap_write(dev->sysmap, BT1_I2C_CTL, 58 BT1_I2C_CTL_GO | (reg & BT1_I2C_CTL_ADDR_MASK)); 59 if (ret) 60 return ret; 61 62 return regmap_read(dev->sysmap, BT1_I2C_DO, val); 63 } 64 65 static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val) 66 { 67 struct dw_i2c_dev *dev = context; 68 int ret; 69 70 ret = regmap_write(dev->sysmap, BT1_I2C_DI, val); 71 if (ret) 72 return ret; 73 74 return regmap_write(dev->sysmap, BT1_I2C_CTL, 75 BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK)); 76 } 77 78 static const struct regmap_config bt1_i2c_cfg = { 79 .reg_bits = 32, 80 .val_bits = 32, 81 .reg_stride = 4, 82 .fast_io = true, 83 .reg_read = bt1_i2c_read, 84 .reg_write = bt1_i2c_write, 85 .max_register = DW_IC_COMP_TYPE, 86 }; 87 88 static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) 89 { 90 dev->sysmap = syscon_node_to_regmap(dev->dev->of_node->parent); 91 if (IS_ERR(dev->sysmap)) 92 return PTR_ERR(dev->sysmap); 93 94 dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg); 95 return PTR_ERR_OR_ZERO(dev->map); 96 } 97 #else 98 static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) 99 { 100 return -ENODEV; 101 } 102 #endif 103 104 static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev) 105 { 106 dev->map = dev_get_regmap(dev->dev->parent, NULL); 107 if (!dev->map) 108 return -ENODEV; 109 110 return 0; 111 } 112 113 static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev) 114 { 115 pm_runtime_disable(dev->dev); 116 117 if (dev->shared_with_punit) 118 pm_runtime_put_noidle(dev->dev); 119 } 120 121 static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev) 122 { 123 struct platform_device *pdev = to_platform_device(dev->dev); 124 int ret; 125 126 switch (dev->flags & MODEL_MASK) { 127 case MODEL_BAIKAL_BT1: 128 ret = bt1_i2c_request_regs(dev); 129 break; 130 case MODEL_WANGXUN_SP: 131 ret = txgbe_i2c_request_regs(dev); 132 break; 133 default: 134 dev->base = devm_platform_ioremap_resource(pdev, 0); 135 ret = PTR_ERR_OR_ZERO(dev->base); 136 break; 137 } 138 139 return ret; 140 } 141 142 static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = { 143 { 144 .ident = "Qtechnology QT5222", 145 .matches = { 146 DMI_MATCH(DMI_SYS_VENDOR, "Qtechnology"), 147 DMI_MATCH(DMI_PRODUCT_NAME, "QT5222"), 148 }, 149 }, 150 { } /* terminate list */ 151 }; 152 153 static const struct i2c_dw_semaphore_callbacks i2c_dw_semaphore_cb_table[] = { 154 #ifdef CONFIG_I2C_DESIGNWARE_BAYTRAIL 155 { 156 .probe = i2c_dw_baytrail_probe_lock_support, 157 }, 158 #endif 159 #ifdef CONFIG_I2C_DESIGNWARE_AMDPSP 160 { 161 .probe = i2c_dw_amdpsp_probe_lock_support, 162 }, 163 #endif 164 {} 165 }; 166 167 static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) 168 { 169 const struct i2c_dw_semaphore_callbacks *ptr; 170 int i = 0; 171 int ret; 172 173 dev->semaphore_idx = -1; 174 175 for (ptr = i2c_dw_semaphore_cb_table; ptr->probe; ptr++) { 176 ret = ptr->probe(dev); 177 if (ret) { 178 /* 179 * If there is no semaphore device attached to this 180 * controller, we shouldn't abort general i2c_controller 181 * probe. 182 */ 183 if (ret != -ENODEV) 184 return ret; 185 186 i++; 187 continue; 188 } 189 190 dev->semaphore_idx = i; 191 break; 192 } 193 194 return 0; 195 } 196 197 static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) 198 { 199 if (dev->semaphore_idx < 0) 200 return; 201 202 if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove) 203 i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev); 204 } 205 206 static int dw_i2c_plat_probe(struct platform_device *pdev) 207 { 208 struct i2c_adapter *adap; 209 struct dw_i2c_dev *dev; 210 int irq, ret; 211 212 irq = platform_get_irq(pdev, 0); 213 if (irq < 0) 214 return irq; 215 216 dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL); 217 if (!dev) 218 return -ENOMEM; 219 220 dev->flags = (uintptr_t)device_get_match_data(&pdev->dev); 221 if (device_property_present(&pdev->dev, "wx,i2c-snps-model")) 222 dev->flags = MODEL_WANGXUN_SP | ACCESS_POLLING; 223 224 dev->dev = &pdev->dev; 225 dev->irq = irq; 226 platform_set_drvdata(pdev, dev); 227 228 ret = dw_i2c_plat_request_regs(dev); 229 if (ret) 230 return ret; 231 232 dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); 233 if (IS_ERR(dev->rst)) 234 return PTR_ERR(dev->rst); 235 236 reset_control_deassert(dev->rst); 237 238 ret = i2c_dw_fw_parse_and_configure(dev); 239 if (ret) 240 goto exit_reset; 241 242 ret = i2c_dw_probe_lock_support(dev); 243 if (ret) 244 goto exit_reset; 245 246 i2c_dw_configure(dev); 247 248 /* Optional interface clock */ 249 dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk"); 250 if (IS_ERR(dev->pclk)) { 251 ret = PTR_ERR(dev->pclk); 252 goto exit_reset; 253 } 254 255 dev->clk = devm_clk_get_optional(&pdev->dev, NULL); 256 if (IS_ERR(dev->clk)) { 257 ret = PTR_ERR(dev->clk); 258 goto exit_reset; 259 } 260 261 ret = i2c_dw_prepare_clk(dev, true); 262 if (ret) 263 goto exit_reset; 264 265 if (dev->clk) { 266 struct i2c_timings *t = &dev->timings; 267 u64 clk_khz; 268 269 dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; 270 clk_khz = dev->get_clk_rate_khz(dev); 271 272 if (!dev->sda_hold_time && t->sda_hold_ns) 273 dev->sda_hold_time = 274 DIV_S64_ROUND_CLOSEST(clk_khz * t->sda_hold_ns, MICRO); 275 } 276 277 adap = &dev->adapter; 278 adap->owner = THIS_MODULE; 279 adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ? 280 I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED; 281 adap->nr = -1; 282 283 if (dev->flags & ACCESS_NO_IRQ_SUSPEND) { 284 dev_pm_set_driver_flags(&pdev->dev, 285 DPM_FLAG_SMART_PREPARE); 286 } else { 287 dev_pm_set_driver_flags(&pdev->dev, 288 DPM_FLAG_SMART_PREPARE | 289 DPM_FLAG_SMART_SUSPEND); 290 } 291 292 device_enable_async_suspend(&pdev->dev); 293 294 /* The code below assumes runtime PM to be disabled. */ 295 WARN_ON(pm_runtime_enabled(&pdev->dev)); 296 297 pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); 298 pm_runtime_use_autosuspend(&pdev->dev); 299 pm_runtime_set_active(&pdev->dev); 300 301 if (dev->shared_with_punit) 302 pm_runtime_get_noresume(&pdev->dev); 303 304 pm_runtime_enable(&pdev->dev); 305 306 ret = i2c_dw_probe(dev); 307 if (ret) 308 goto exit_probe; 309 310 return ret; 311 312 exit_probe: 313 dw_i2c_plat_pm_cleanup(dev); 314 exit_reset: 315 reset_control_assert(dev->rst); 316 return ret; 317 } 318 319 static void dw_i2c_plat_remove(struct platform_device *pdev) 320 { 321 struct dw_i2c_dev *dev = platform_get_drvdata(pdev); 322 323 pm_runtime_get_sync(&pdev->dev); 324 325 i2c_del_adapter(&dev->adapter); 326 327 i2c_dw_disable(dev); 328 329 pm_runtime_dont_use_autosuspend(&pdev->dev); 330 pm_runtime_put_sync(&pdev->dev); 331 dw_i2c_plat_pm_cleanup(dev); 332 333 i2c_dw_remove_lock_support(dev); 334 335 reset_control_assert(dev->rst); 336 } 337 338 static const struct of_device_id dw_i2c_of_match[] = { 339 { .compatible = "snps,designware-i2c", }, 340 { .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT }, 341 { .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 }, 342 {} 343 }; 344 MODULE_DEVICE_TABLE(of, dw_i2c_of_match); 345 346 static const struct acpi_device_id dw_i2c_acpi_match[] = { 347 { "80860F41", ACCESS_NO_IRQ_SUSPEND }, 348 { "808622C1", ACCESS_NO_IRQ_SUSPEND }, 349 { "AMD0010", ACCESS_INTR_MASK }, 350 { "AMDI0010", ACCESS_INTR_MASK }, 351 { "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE }, 352 { "AMDI0510", 0 }, 353 { "APMC0D0F", 0 }, 354 { "HISI02A1", 0 }, 355 { "HISI02A2", 0 }, 356 { "HISI02A3", 0 }, 357 { "HYGO0010", ACCESS_INTR_MASK }, 358 { "INT33C2", 0 }, 359 { "INT33C3", 0 }, 360 { "INT3432", 0 }, 361 { "INT3433", 0 }, 362 { "INTC10EF", 0 }, 363 {} 364 }; 365 MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); 366 367 static const struct platform_device_id dw_i2c_platform_ids[] = { 368 { "i2c_designware" }, 369 {} 370 }; 371 MODULE_DEVICE_TABLE(platform, dw_i2c_platform_ids); 372 373 static struct platform_driver dw_i2c_driver = { 374 .probe = dw_i2c_plat_probe, 375 .remove_new = dw_i2c_plat_remove, 376 .driver = { 377 .name = "i2c_designware", 378 .of_match_table = dw_i2c_of_match, 379 .acpi_match_table = dw_i2c_acpi_match, 380 .pm = pm_ptr(&i2c_dw_dev_pm_ops), 381 }, 382 .id_table = dw_i2c_platform_ids, 383 }; 384 385 static int __init dw_i2c_init_driver(void) 386 { 387 return platform_driver_register(&dw_i2c_driver); 388 } 389 subsys_initcall(dw_i2c_init_driver); 390 391 static void __exit dw_i2c_exit_driver(void) 392 { 393 platform_driver_unregister(&dw_i2c_driver); 394 } 395 module_exit(dw_i2c_exit_driver); 396 397 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); 398 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter"); 399 MODULE_LICENSE("GPL"); 400 MODULE_IMPORT_NS(I2C_DW); 401 MODULE_IMPORT_NS(I2C_DW_COMMON); 402