1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Intel CHT Whiskey Cove PMIC I2C Master driver 4 * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> 5 * 6 * Based on various non upstream patches to support the CHT Whiskey Cove PMIC: 7 * Copyright (C) 2011 - 2014 Intel Corporation. All rights reserved. 8 */ 9 10 #include <linux/acpi.h> 11 #include <linux/completion.h> 12 #include <linux/delay.h> 13 #include <linux/i2c.h> 14 #include <linux/interrupt.h> 15 #include <linux/irq.h> 16 #include <linux/irqdomain.h> 17 #include <linux/mfd/intel_soc_pmic.h> 18 #include <linux/module.h> 19 #include <linux/platform_device.h> 20 #include <linux/power/bq24190_charger.h> 21 #include <linux/power/bq25890_charger.h> 22 #include <linux/slab.h> 23 24 #define CHT_WC_I2C_CTRL 0x5e24 25 #define CHT_WC_I2C_CTRL_WR BIT(0) 26 #define CHT_WC_I2C_CTRL_RD BIT(1) 27 #define CHT_WC_I2C_CLIENT_ADDR 0x5e25 28 #define CHT_WC_I2C_REG_OFFSET 0x5e26 29 #define CHT_WC_I2C_WRDATA 0x5e27 30 #define CHT_WC_I2C_RDDATA 0x5e28 31 32 #define CHT_WC_EXTCHGRIRQ 0x6e0a 33 #define CHT_WC_EXTCHGRIRQ_CLIENT_IRQ BIT(0) 34 #define CHT_WC_EXTCHGRIRQ_WRITE_IRQ BIT(1) 35 #define CHT_WC_EXTCHGRIRQ_READ_IRQ BIT(2) 36 #define CHT_WC_EXTCHGRIRQ_NACK_IRQ BIT(3) 37 #define CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK ((u8)GENMASK(3, 1)) 38 #define CHT_WC_EXTCHGRIRQ_MSK 0x6e17 39 40 struct cht_wc_i2c_adap { 41 struct i2c_adapter adapter; 42 wait_queue_head_t wait; 43 struct irq_chip irqchip; 44 struct mutex adap_lock; 45 struct mutex irqchip_lock; 46 struct regmap *regmap; 47 struct irq_domain *irq_domain; 48 struct i2c_client *client; 49 int client_irq; 50 u8 irq_mask; 51 u8 old_irq_mask; 52 int read_data; 53 bool io_error; 54 bool done; 55 }; 56 57 static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data) 58 { 59 struct cht_wc_i2c_adap *adap = data; 60 int ret, reg; 61 62 mutex_lock(&adap->adap_lock); 63 64 /* Read IRQs */ 65 ret = regmap_read(adap->regmap, CHT_WC_EXTCHGRIRQ, ®); 66 if (ret) { 67 dev_err(&adap->adapter.dev, "Error reading extchgrirq reg\n"); 68 mutex_unlock(&adap->adap_lock); 69 return IRQ_NONE; 70 } 71 72 reg &= ~adap->irq_mask; 73 74 /* Reads must be acked after reading the received data. */ 75 ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &adap->read_data); 76 if (ret) 77 adap->io_error = true; 78 79 /* 80 * Immediately ack IRQs, so that if new IRQs arrives while we're 81 * handling the previous ones our irq will re-trigger when we're done. 82 */ 83 ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, reg); 84 if (ret) 85 dev_err(&adap->adapter.dev, "Error writing extchgrirq reg\n"); 86 87 if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) { 88 adap->io_error |= !!(reg & CHT_WC_EXTCHGRIRQ_NACK_IRQ); 89 adap->done = true; 90 } 91 92 mutex_unlock(&adap->adap_lock); 93 94 if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) 95 wake_up(&adap->wait); 96 97 /* 98 * Do NOT use handle_nested_irq here, the client irq handler will 99 * likely want to do i2c transfers and the i2c controller uses this 100 * interrupt handler as well, so running the client irq handler from 101 * this thread will cause things to lock up. 102 */ 103 if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) 104 generic_handle_irq_safe(adap->client_irq); 105 106 return IRQ_HANDLED; 107 } 108 109 static u32 cht_wc_i2c_adap_master_func(struct i2c_adapter *adap) 110 { 111 /* This i2c adapter only supports SMBUS byte transfers */ 112 return I2C_FUNC_SMBUS_BYTE_DATA; 113 } 114 115 static int cht_wc_i2c_adap_smbus_xfer(struct i2c_adapter *_adap, u16 addr, 116 unsigned short flags, char read_write, 117 u8 command, int size, 118 union i2c_smbus_data *data) 119 { 120 struct cht_wc_i2c_adap *adap = i2c_get_adapdata(_adap); 121 int ret; 122 123 mutex_lock(&adap->adap_lock); 124 adap->io_error = false; 125 adap->done = false; 126 mutex_unlock(&adap->adap_lock); 127 128 ret = regmap_write(adap->regmap, CHT_WC_I2C_CLIENT_ADDR, addr); 129 if (ret) 130 return ret; 131 132 if (read_write == I2C_SMBUS_WRITE) { 133 ret = regmap_write(adap->regmap, CHT_WC_I2C_WRDATA, data->byte); 134 if (ret) 135 return ret; 136 } 137 138 ret = regmap_write(adap->regmap, CHT_WC_I2C_REG_OFFSET, command); 139 if (ret) 140 return ret; 141 142 ret = regmap_write(adap->regmap, CHT_WC_I2C_CTRL, 143 (read_write == I2C_SMBUS_WRITE) ? 144 CHT_WC_I2C_CTRL_WR : CHT_WC_I2C_CTRL_RD); 145 if (ret) 146 return ret; 147 148 ret = wait_event_timeout(adap->wait, adap->done, msecs_to_jiffies(30)); 149 if (ret == 0) { 150 /* 151 * The CHT GPIO controller serializes all IRQs, sometimes 152 * causing significant delays, check status manually. 153 */ 154 cht_wc_i2c_adap_thread_handler(0, adap); 155 if (!adap->done) 156 return -ETIMEDOUT; 157 } 158 159 ret = 0; 160 mutex_lock(&adap->adap_lock); 161 if (adap->io_error) 162 ret = -EIO; 163 else if (read_write == I2C_SMBUS_READ) 164 data->byte = adap->read_data; 165 mutex_unlock(&adap->adap_lock); 166 167 return ret; 168 } 169 170 static const struct i2c_algorithm cht_wc_i2c_adap_algo = { 171 .functionality = cht_wc_i2c_adap_master_func, 172 .smbus_xfer = cht_wc_i2c_adap_smbus_xfer, 173 }; 174 175 /* 176 * We are an i2c-adapter which itself is part of an i2c-client. This means that 177 * transfers done through us take adapter->bus_lock twice, once for our parent 178 * i2c-adapter and once to take our own bus_lock. Lockdep does not like this 179 * nested locking, to make lockdep happy in the case of busses with muxes, the 180 * i2c-core's i2c_adapter_lock_bus function calls: 181 * rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter)); 182 * 183 * But i2c_adapter_depth only works when the direct parent of the adapter is 184 * another adapter, as it is only meant for muxes. In our case there is an 185 * i2c-client and MFD instantiated platform_device in the parent->child chain 186 * between the 2 devices. 187 * 188 * So we override the default i2c_lock_operations and pass a hardcoded 189 * depth of 1 to rt_mutex_lock_nested, to make lockdep happy. 190 * 191 * Note that if there were to be a mux attached to our adapter, this would 192 * break things again since the i2c-mux code expects the root-adapter to have 193 * a locking depth of 0. But we always have only 1 client directly attached 194 * in the form of the Charger IC paired with the CHT Whiskey Cove PMIC. 195 */ 196 static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter, 197 unsigned int flags) 198 { 199 rt_mutex_lock_nested(&adapter->bus_lock, 1); 200 } 201 202 static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter, 203 unsigned int flags) 204 { 205 return rt_mutex_trylock(&adapter->bus_lock); 206 } 207 208 static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter, 209 unsigned int flags) 210 { 211 rt_mutex_unlock(&adapter->bus_lock); 212 } 213 214 static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = { 215 .lock_bus = cht_wc_i2c_adap_lock_bus, 216 .trylock_bus = cht_wc_i2c_adap_trylock_bus, 217 .unlock_bus = cht_wc_i2c_adap_unlock_bus, 218 }; 219 220 /**** irqchip for the client connected to the extchgr i2c adapter ****/ 221 static void cht_wc_i2c_irq_lock(struct irq_data *data) 222 { 223 struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); 224 225 mutex_lock(&adap->irqchip_lock); 226 } 227 228 static void cht_wc_i2c_irq_sync_unlock(struct irq_data *data) 229 { 230 struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); 231 int ret; 232 233 if (adap->irq_mask != adap->old_irq_mask) { 234 ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, 235 adap->irq_mask); 236 if (ret == 0) 237 adap->old_irq_mask = adap->irq_mask; 238 else 239 dev_err(&adap->adapter.dev, "Error writing EXTCHGRIRQ_MSK\n"); 240 } 241 242 mutex_unlock(&adap->irqchip_lock); 243 } 244 245 static void cht_wc_i2c_irq_enable(struct irq_data *data) 246 { 247 struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); 248 249 adap->irq_mask &= ~CHT_WC_EXTCHGRIRQ_CLIENT_IRQ; 250 } 251 252 static void cht_wc_i2c_irq_disable(struct irq_data *data) 253 { 254 struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); 255 256 adap->irq_mask |= CHT_WC_EXTCHGRIRQ_CLIENT_IRQ; 257 } 258 259 static const struct irq_chip cht_wc_i2c_irq_chip = { 260 .irq_bus_lock = cht_wc_i2c_irq_lock, 261 .irq_bus_sync_unlock = cht_wc_i2c_irq_sync_unlock, 262 .irq_disable = cht_wc_i2c_irq_disable, 263 .irq_enable = cht_wc_i2c_irq_enable, 264 .name = "cht_wc_ext_chrg_irq_chip", 265 }; 266 267 /********** GPD Win / Pocket charger IC settings **********/ 268 static const char * const bq24190_suppliers[] = { 269 "tcpm-source-psy-i2c-fusb302" }; 270 271 static const struct property_entry bq24190_props[] = { 272 PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers), 273 PROPERTY_ENTRY_BOOL("omit-battery-class"), 274 PROPERTY_ENTRY_BOOL("disable-reset"), 275 { } 276 }; 277 278 static const struct software_node bq24190_node = { 279 .properties = bq24190_props, 280 }; 281 282 static struct regulator_consumer_supply fusb302_consumer = { 283 .supply = "vbus", 284 /* Must match fusb302 dev_name in intel_cht_int33fe.c */ 285 .dev_name = "i2c-fusb302", 286 }; 287 288 static const struct regulator_init_data bq24190_vbus_init_data = { 289 .constraints = { 290 /* The name is used in intel_cht_int33fe.c do not change. */ 291 .name = "cht_wc_usb_typec_vbus", 292 .valid_ops_mask = REGULATOR_CHANGE_STATUS, 293 }, 294 .consumer_supplies = &fusb302_consumer, 295 .num_consumer_supplies = 1, 296 }; 297 298 static struct bq24190_platform_data bq24190_pdata = { 299 .regulator_init_data = &bq24190_vbus_init_data, 300 }; 301 302 static struct i2c_board_info gpd_win_board_info = { 303 .type = "bq24190", 304 .addr = 0x6b, 305 .dev_name = "bq24190", 306 .swnode = &bq24190_node, 307 .platform_data = &bq24190_pdata, 308 }; 309 310 /********** Xiaomi Mi Pad 2 charger IC settings **********/ 311 static struct regulator_consumer_supply bq2589x_vbus_consumer = { 312 .supply = "vbus", 313 .dev_name = "cht_wcove_pwrsrc", 314 }; 315 316 static const struct regulator_init_data bq2589x_vbus_init_data = { 317 .constraints = { 318 .valid_ops_mask = REGULATOR_CHANGE_STATUS, 319 }, 320 .consumer_supplies = &bq2589x_vbus_consumer, 321 .num_consumer_supplies = 1, 322 }; 323 324 static struct bq25890_platform_data bq2589x_pdata = { 325 .regulator_init_data = &bq2589x_vbus_init_data, 326 }; 327 328 static const struct property_entry xiaomi_mipad2_props[] = { 329 PROPERTY_ENTRY_BOOL("linux,skip-reset"), 330 PROPERTY_ENTRY_BOOL("linux,read-back-settings"), 331 { } 332 }; 333 334 static const struct software_node xiaomi_mipad2_node = { 335 .properties = xiaomi_mipad2_props, 336 }; 337 338 static struct i2c_board_info xiaomi_mipad2_board_info = { 339 .type = "bq25890", 340 .addr = 0x6a, 341 .dev_name = "bq25890", 342 .swnode = &xiaomi_mipad2_node, 343 .platform_data = &bq2589x_pdata, 344 }; 345 346 /********** Lenovo Yogabook YB1-X90F/-X91F/-X91L charger settings **********/ 347 static const char * const lenovo_yb1_bq25892_suppliers[] = { "cht_wcove_pwrsrc" }; 348 349 static const struct property_entry lenovo_yb1_bq25892_props[] = { 350 PROPERTY_ENTRY_STRING_ARRAY("supplied-from", 351 lenovo_yb1_bq25892_suppliers), 352 PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000), 353 PROPERTY_ENTRY_BOOL("linux,skip-reset"), 354 /* 355 * The firmware sets everything to the defaults, which leads to a 356 * somewhat low charge-current of 2048mA and worse to a battery-voltage 357 * of 4.2V instead of 4.35V (when booted without a charger connected). 358 * Use our own values instead of "linux,read-back-settings" to fix this. 359 */ 360 PROPERTY_ENTRY_U32("ti,charge-current", 4224000), 361 PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), 362 PROPERTY_ENTRY_U32("ti,termination-current", 256000), 363 PROPERTY_ENTRY_U32("ti,precharge-current", 128000), 364 PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3500000), 365 PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), 366 PROPERTY_ENTRY_U32("ti,boost-max-current", 1400000), 367 PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), 368 { } 369 }; 370 371 static const struct software_node lenovo_yb1_bq25892_node = { 372 .properties = lenovo_yb1_bq25892_props, 373 }; 374 375 static struct i2c_board_info lenovo_yogabook1_board_info = { 376 .type = "bq25892", 377 .addr = 0x6b, 378 .dev_name = "bq25892", 379 .swnode = &lenovo_yb1_bq25892_node, 380 .platform_data = &bq2589x_pdata, 381 }; 382 383 /********** Lenovo Yogabook YT3-X90F charger settings **********/ 384 static const char * const lenovo_yt3_bq25892_1_suppliers[] = { "cht_wcove_pwrsrc" }; 385 386 /* 387 * bq25892 charger settings for the round li-ion cells in the hinge, 388 * this is the main / biggest battery. 389 */ 390 static const struct property_entry lenovo_yt3_bq25892_1_props[] = { 391 PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_1_suppliers), 392 PROPERTY_ENTRY_STRING("linux,secondary-charger-name", "bq25890-charger-0"), 393 PROPERTY_ENTRY_U32("linux,iinlim-percentage", 60), 394 PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000), 395 PROPERTY_ENTRY_BOOL("linux,skip-reset"), 396 /* 397 * The firmware sets everything to the defaults, leading to a low(ish) 398 * charge-current and battery-voltage of 2048mA resp 4.2V. Use the 399 * Android values instead of "linux,read-back-settings" to fix this. 400 */ 401 PROPERTY_ENTRY_U32("ti,charge-current", 3072000), 402 PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), 403 PROPERTY_ENTRY_U32("ti,termination-current", 128000), 404 PROPERTY_ENTRY_U32("ti,precharge-current", 128000), 405 PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3700000), 406 PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), 407 /* Set 5V boost current-limit to 1.2A (MAX/POR values are 2.45A/1.4A) */ 408 PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), 409 PROPERTY_ENTRY_U32("ti,boost-max-current", 1200000), 410 { } 411 }; 412 413 static const struct software_node lenovo_yt3_bq25892_1_node = { 414 .properties = lenovo_yt3_bq25892_1_props, 415 }; 416 417 /* bq25892 charger for the round li-ion cells in the hinge */ 418 static struct i2c_board_info lenovo_yoga_tab3_board_info = { 419 .type = "bq25892", 420 .addr = 0x6b, 421 .dev_name = "bq25892_1", 422 .swnode = &lenovo_yt3_bq25892_1_node, 423 .platform_data = &bq2589x_pdata, 424 }; 425 426 static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) 427 { 428 struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); 429 struct i2c_board_info *board_info = NULL; 430 struct cht_wc_i2c_adap *adap; 431 int ret, reg, irq; 432 433 irq = platform_get_irq(pdev, 0); 434 if (irq < 0) 435 return irq; 436 437 adap = devm_kzalloc(&pdev->dev, sizeof(*adap), GFP_KERNEL); 438 if (!adap) 439 return -ENOMEM; 440 441 init_waitqueue_head(&adap->wait); 442 mutex_init(&adap->adap_lock); 443 mutex_init(&adap->irqchip_lock); 444 adap->irqchip = cht_wc_i2c_irq_chip; 445 adap->regmap = pmic->regmap; 446 adap->adapter.owner = THIS_MODULE; 447 adap->adapter.class = I2C_CLASS_HWMON; 448 adap->adapter.algo = &cht_wc_i2c_adap_algo; 449 adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops; 450 strscpy(adap->adapter.name, "PMIC I2C Adapter", 451 sizeof(adap->adapter.name)); 452 adap->adapter.dev.parent = &pdev->dev; 453 454 /* Clear and activate i2c-adapter interrupts, disable client IRQ */ 455 adap->old_irq_mask = adap->irq_mask = ~CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK; 456 457 ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, ®); 458 if (ret) 459 return ret; 460 461 ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, ~adap->irq_mask); 462 if (ret) 463 return ret; 464 465 ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, adap->irq_mask); 466 if (ret) 467 return ret; 468 469 /* Alloc and register client IRQ */ 470 adap->irq_domain = irq_domain_add_linear(NULL, 1, &irq_domain_simple_ops, NULL); 471 if (!adap->irq_domain) 472 return -ENOMEM; 473 474 adap->client_irq = irq_create_mapping(adap->irq_domain, 0); 475 if (!adap->client_irq) { 476 ret = -ENOMEM; 477 goto remove_irq_domain; 478 } 479 480 irq_set_chip_data(adap->client_irq, adap); 481 irq_set_chip_and_handler(adap->client_irq, &adap->irqchip, 482 handle_simple_irq); 483 484 ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, 485 cht_wc_i2c_adap_thread_handler, 486 IRQF_ONESHOT, "PMIC I2C Adapter", adap); 487 if (ret) 488 goto remove_irq_domain; 489 490 i2c_set_adapdata(&adap->adapter, adap); 491 ret = i2c_add_adapter(&adap->adapter); 492 if (ret) 493 goto remove_irq_domain; 494 495 switch (pmic->cht_wc_model) { 496 case INTEL_CHT_WC_GPD_WIN_POCKET: 497 board_info = &gpd_win_board_info; 498 break; 499 case INTEL_CHT_WC_XIAOMI_MIPAD2: 500 board_info = &xiaomi_mipad2_board_info; 501 break; 502 case INTEL_CHT_WC_LENOVO_YOGABOOK1: 503 board_info = &lenovo_yogabook1_board_info; 504 break; 505 case INTEL_CHT_WC_LENOVO_YT3_X90: 506 board_info = &lenovo_yoga_tab3_board_info; 507 break; 508 default: 509 dev_warn(&pdev->dev, "Unknown model, not instantiating charger device\n"); 510 break; 511 } 512 513 if (board_info) { 514 board_info->irq = adap->client_irq; 515 adap->client = i2c_new_client_device(&adap->adapter, board_info); 516 if (IS_ERR(adap->client)) { 517 ret = PTR_ERR(adap->client); 518 goto del_adapter; 519 } 520 } 521 522 platform_set_drvdata(pdev, adap); 523 return 0; 524 525 del_adapter: 526 i2c_del_adapter(&adap->adapter); 527 remove_irq_domain: 528 irq_domain_remove(adap->irq_domain); 529 return ret; 530 } 531 532 static void cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev) 533 { 534 struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev); 535 536 i2c_unregister_device(adap->client); 537 i2c_del_adapter(&adap->adapter); 538 irq_domain_remove(adap->irq_domain); 539 } 540 541 static const struct platform_device_id cht_wc_i2c_adap_id_table[] = { 542 { .name = "cht_wcove_ext_chgr" }, 543 {}, 544 }; 545 MODULE_DEVICE_TABLE(platform, cht_wc_i2c_adap_id_table); 546 547 static struct platform_driver cht_wc_i2c_adap_driver = { 548 .probe = cht_wc_i2c_adap_i2c_probe, 549 .remove_new = cht_wc_i2c_adap_i2c_remove, 550 .driver = { 551 .name = "cht_wcove_ext_chgr", 552 }, 553 .id_table = cht_wc_i2c_adap_id_table, 554 }; 555 module_platform_driver(cht_wc_i2c_adap_driver); 556 557 MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC I2C Master driver"); 558 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); 559 MODULE_LICENSE("GPL"); 560