1 // SPDX-License-Identifier: GPL-2.0-only 2 // Copyright (C) 2014 Broadcom Corporation 3 4 #include <linux/clk.h> 5 #include <linux/delay.h> 6 #include <linux/device.h> 7 #include <linux/i2c.h> 8 #include <linux/interrupt.h> 9 #include <linux/io.h> 10 #include <linux/kernel.h> 11 #include <linux/module.h> 12 #include <linux/platform_device.h> 13 #include <linux/sched.h> 14 #include <linux/slab.h> 15 16 #define N_DATA_REGS 8 17 18 /* 19 * PER_I2C/BSC count register mask depends on 1 byte/4 byte data register 20 * size. Cable modem and DSL SoCs with Peripheral i2c cores use 1 byte per 21 * data register whereas STB SoCs use 4 byte per data register transfer, 22 * account for this difference in total count per transaction and mask to 23 * use. 24 */ 25 #define BSC_CNT_REG1_MASK(nb) (nb == 1 ? GENMASK(3, 0) : GENMASK(5, 0)) 26 #define BSC_CNT_REG1_SHIFT 0 27 28 /* BSC CTL register field definitions */ 29 #define BSC_CTL_REG_DTF_MASK 0x00000003 30 #define BSC_CTL_REG_SCL_SEL_MASK 0x00000030 31 #define BSC_CTL_REG_SCL_SEL_SHIFT 4 32 #define BSC_CTL_REG_INT_EN_MASK 0x00000040 33 #define BSC_CTL_REG_INT_EN_SHIFT 6 34 #define BSC_CTL_REG_DIV_CLK_MASK 0x00000080 35 36 /* BSC_IIC_ENABLE r/w enable and interrupt field definitions */ 37 #define BSC_IIC_EN_RESTART_MASK 0x00000040 38 #define BSC_IIC_EN_NOSTART_MASK 0x00000020 39 #define BSC_IIC_EN_NOSTOP_MASK 0x00000010 40 #define BSC_IIC_EN_NOACK_MASK 0x00000004 41 #define BSC_IIC_EN_INTRP_MASK 0x00000002 42 #define BSC_IIC_EN_ENABLE_MASK 0x00000001 43 44 /* BSC_CTLHI control register field definitions */ 45 #define BSC_CTLHI_REG_INPUT_SWITCHING_LEVEL_MASK 0x00000080 46 #define BSC_CTLHI_REG_DATAREG_SIZE_MASK 0x00000040 47 #define BSC_CTLHI_REG_IGNORE_ACK_MASK 0x00000002 48 #define BSC_CTLHI_REG_WAIT_DIS_MASK 0x00000001 49 50 #define I2C_TIMEOUT 100 /* msecs */ 51 52 /* Condition mask used for non combined transfer */ 53 #define COND_RESTART BSC_IIC_EN_RESTART_MASK 54 #define COND_NOSTART BSC_IIC_EN_NOSTART_MASK 55 #define COND_NOSTOP BSC_IIC_EN_NOSTOP_MASK 56 #define COND_START_STOP (COND_RESTART | COND_NOSTART | COND_NOSTOP) 57 58 /* BSC data transfer direction */ 59 #define DTF_WR_MASK 0x00000000 60 #define DTF_RD_MASK 0x00000001 61 /* BSC data transfer direction combined format */ 62 #define DTF_RD_WR_MASK 0x00000002 63 #define DTF_WR_RD_MASK 0x00000003 64 65 #define INT_ENABLE true 66 #define INT_DISABLE false 67 68 /* BSC block register map structure to cache fields to be written */ 69 struct bsc_regs { 70 u32 chip_address; /* slave address */ 71 u32 data_in[N_DATA_REGS]; /* tx data buffer*/ 72 u32 cnt_reg; /* rx/tx data length */ 73 u32 ctl_reg; /* control register */ 74 u32 iic_enable; /* xfer enable and status */ 75 u32 data_out[N_DATA_REGS]; /* rx data buffer */ 76 u32 ctlhi_reg; /* more control fields */ 77 u32 scl_param; /* reserved */ 78 }; 79 80 struct bsc_clk_param { 81 u32 hz; 82 u32 scl_mask; 83 u32 div_mask; 84 }; 85 86 enum bsc_xfer_cmd { 87 CMD_WR, 88 CMD_RD, 89 CMD_WR_NOACK, 90 CMD_RD_NOACK, 91 }; 92 93 static char const *cmd_string[] = { 94 [CMD_WR] = "WR", 95 [CMD_RD] = "RD", 96 [CMD_WR_NOACK] = "WR NOACK", 97 [CMD_RD_NOACK] = "RD NOACK", 98 }; 99 100 enum bus_speeds { 101 SPD_375K, 102 SPD_390K, 103 SPD_187K, 104 SPD_200K, 105 SPD_93K, 106 SPD_97K, 107 SPD_46K, 108 SPD_50K 109 }; 110 111 static const struct bsc_clk_param bsc_clk[] = { 112 [SPD_375K] = { 113 .hz = 375000, 114 .scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT, 115 .div_mask = 0 116 }, 117 [SPD_390K] = { 118 .hz = 390000, 119 .scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT, 120 .div_mask = 0 121 }, 122 [SPD_187K] = { 123 .hz = 187500, 124 .scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT, 125 .div_mask = 0 126 }, 127 [SPD_200K] = { 128 .hz = 200000, 129 .scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT, 130 .div_mask = 0 131 }, 132 [SPD_93K] = { 133 .hz = 93750, 134 .scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT, 135 .div_mask = BSC_CTL_REG_DIV_CLK_MASK 136 }, 137 [SPD_97K] = { 138 .hz = 97500, 139 .scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT, 140 .div_mask = BSC_CTL_REG_DIV_CLK_MASK 141 }, 142 [SPD_46K] = { 143 .hz = 46875, 144 .scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT, 145 .div_mask = BSC_CTL_REG_DIV_CLK_MASK 146 }, 147 [SPD_50K] = { 148 .hz = 50000, 149 .scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT, 150 .div_mask = BSC_CTL_REG_DIV_CLK_MASK 151 } 152 }; 153 154 struct brcmstb_i2c_dev { 155 struct device *device; 156 void __iomem *base; 157 int irq; 158 struct bsc_regs *bsc_regmap; 159 struct i2c_adapter adapter; 160 struct completion done; 161 u32 clk_freq_hz; 162 int data_regsz; 163 }; 164 165 /* register accessors for both be and le cpu arch */ 166 #ifdef CONFIG_CPU_BIG_ENDIAN 167 #define __bsc_readl(_reg) ioread32be(_reg) 168 #define __bsc_writel(_val, _reg) iowrite32be(_val, _reg) 169 #else 170 #define __bsc_readl(_reg) ioread32(_reg) 171 #define __bsc_writel(_val, _reg) iowrite32(_val, _reg) 172 #endif 173 174 #define bsc_readl(_dev, _reg) \ 175 __bsc_readl(_dev->base + offsetof(struct bsc_regs, _reg)) 176 177 #define bsc_writel(_dev, _val, _reg) \ 178 __bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg)) 179 180 static inline int brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev *dev) 181 { 182 return (N_DATA_REGS * dev->data_regsz); 183 } 184 185 static inline int brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev *dev) 186 { 187 return dev->data_regsz; 188 } 189 190 static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev, 191 bool int_en) 192 { 193 194 if (int_en) 195 /* Enable BSC CTL interrupt line */ 196 dev->bsc_regmap->ctl_reg |= BSC_CTL_REG_INT_EN_MASK; 197 else 198 /* Disable BSC CTL interrupt line */ 199 dev->bsc_regmap->ctl_reg &= ~BSC_CTL_REG_INT_EN_MASK; 200 201 barrier(); 202 bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg); 203 } 204 205 static irqreturn_t brcmstb_i2c_isr(int irq, void *devid) 206 { 207 struct brcmstb_i2c_dev *dev = devid; 208 u32 status_bsc_ctl = bsc_readl(dev, ctl_reg); 209 u32 status_iic_intrp = bsc_readl(dev, iic_enable); 210 211 dev_dbg(dev->device, "isr CTL_REG %x IIC_EN %x\n", 212 status_bsc_ctl, status_iic_intrp); 213 214 if (!(status_bsc_ctl & BSC_CTL_REG_INT_EN_MASK)) 215 return IRQ_NONE; 216 217 brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); 218 complete(&dev->done); 219 220 dev_dbg(dev->device, "isr handled"); 221 return IRQ_HANDLED; 222 } 223 224 /* Wait for device to be ready */ 225 static int brcmstb_i2c_wait_if_busy(struct brcmstb_i2c_dev *dev) 226 { 227 unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT); 228 229 while ((bsc_readl(dev, iic_enable) & BSC_IIC_EN_INTRP_MASK)) { 230 if (time_after(jiffies, timeout)) 231 return -ETIMEDOUT; 232 cpu_relax(); 233 } 234 return 0; 235 } 236 237 /* i2c xfer completion function, handles both irq and polling mode */ 238 static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev) 239 { 240 int ret = 0; 241 unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT); 242 243 if (dev->irq >= 0) { 244 if (!wait_for_completion_timeout(&dev->done, timeout)) 245 ret = -ETIMEDOUT; 246 } else { 247 /* we are in polling mode */ 248 u32 bsc_intrp; 249 unsigned long time_left = jiffies + timeout; 250 251 do { 252 bsc_intrp = bsc_readl(dev, iic_enable) & 253 BSC_IIC_EN_INTRP_MASK; 254 if (time_after(jiffies, time_left)) { 255 ret = -ETIMEDOUT; 256 break; 257 } 258 cpu_relax(); 259 } while (!bsc_intrp); 260 } 261 262 if (dev->irq < 0 || ret == -ETIMEDOUT) 263 brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); 264 265 return ret; 266 } 267 268 /* Set xfer START/STOP conditions for subsequent transfer */ 269 static void brcmstb_set_i2c_start_stop(struct brcmstb_i2c_dev *dev, 270 u32 cond_flag) 271 { 272 u32 regval = dev->bsc_regmap->iic_enable; 273 274 dev->bsc_regmap->iic_enable = (regval & ~COND_START_STOP) | cond_flag; 275 } 276 277 /* Send I2C request check completion */ 278 static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev, 279 enum bsc_xfer_cmd cmd) 280 { 281 int rc = 0; 282 struct bsc_regs *pi2creg = dev->bsc_regmap; 283 284 /* Make sure the hardware is ready */ 285 rc = brcmstb_i2c_wait_if_busy(dev); 286 if (rc < 0) 287 return rc; 288 289 /* only if we are in interrupt mode */ 290 if (dev->irq >= 0) 291 reinit_completion(&dev->done); 292 293 /* enable BSC CTL interrupt line */ 294 brcmstb_i2c_enable_disable_irq(dev, INT_ENABLE); 295 296 /* initiate transfer by setting iic_enable */ 297 pi2creg->iic_enable |= BSC_IIC_EN_ENABLE_MASK; 298 bsc_writel(dev, pi2creg->iic_enable, iic_enable); 299 300 /* Wait for transaction to finish or timeout */ 301 rc = brcmstb_i2c_wait_for_completion(dev); 302 if (rc) { 303 dev_dbg(dev->device, "intr timeout for cmd %s\n", 304 cmd_string[cmd]); 305 goto cmd_out; 306 } 307 308 if ((cmd == CMD_RD || cmd == CMD_WR) && 309 bsc_readl(dev, iic_enable) & BSC_IIC_EN_NOACK_MASK) { 310 rc = -EREMOTEIO; 311 dev_dbg(dev->device, "controller received NOACK intr for %s\n", 312 cmd_string[cmd]); 313 } 314 315 cmd_out: 316 bsc_writel(dev, 0, cnt_reg); 317 bsc_writel(dev, 0, iic_enable); 318 319 return rc; 320 } 321 322 /* Actual data transfer through the BSC master */ 323 static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev, 324 u8 *buf, unsigned int len, 325 struct i2c_msg *pmsg) 326 { 327 int cnt, byte, i, rc; 328 enum bsc_xfer_cmd cmd; 329 u32 ctl_reg; 330 struct bsc_regs *pi2creg = dev->bsc_regmap; 331 int no_ack = pmsg->flags & I2C_M_IGNORE_NAK; 332 int data_regsz = brcmstb_i2c_get_data_regsz(dev); 333 334 /* see if the transaction needs to check NACK conditions */ 335 if (no_ack) { 336 cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK 337 : CMD_WR_NOACK; 338 pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK; 339 } else { 340 cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD : CMD_WR; 341 pi2creg->ctlhi_reg &= ~BSC_CTLHI_REG_IGNORE_ACK_MASK; 342 } 343 bsc_writel(dev, pi2creg->ctlhi_reg, ctlhi_reg); 344 345 /* set data transfer direction */ 346 ctl_reg = pi2creg->ctl_reg & ~BSC_CTL_REG_DTF_MASK; 347 if (cmd == CMD_WR || cmd == CMD_WR_NOACK) 348 pi2creg->ctl_reg = ctl_reg | DTF_WR_MASK; 349 else 350 pi2creg->ctl_reg = ctl_reg | DTF_RD_MASK; 351 352 /* set the read/write length */ 353 bsc_writel(dev, BSC_CNT_REG1_MASK(data_regsz) & 354 (len << BSC_CNT_REG1_SHIFT), cnt_reg); 355 356 /* Write data into data_in register */ 357 358 if (cmd == CMD_WR || cmd == CMD_WR_NOACK) { 359 for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) { 360 u32 word = 0; 361 362 for (byte = 0; byte < data_regsz; byte++) { 363 word >>= BITS_PER_BYTE; 364 if ((cnt + byte) < len) 365 word |= buf[cnt + byte] << 366 (BITS_PER_BYTE * (data_regsz - 1)); 367 } 368 bsc_writel(dev, word, data_in[i]); 369 } 370 } 371 372 /* Initiate xfer, the function will return on completion */ 373 rc = brcmstb_send_i2c_cmd(dev, cmd); 374 375 if (rc != 0) { 376 dev_dbg(dev->device, "%s failure", cmd_string[cmd]); 377 return rc; 378 } 379 380 /* Read data from data_out register */ 381 if (cmd == CMD_RD || cmd == CMD_RD_NOACK) { 382 for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) { 383 u32 data = bsc_readl(dev, data_out[i]); 384 385 for (byte = 0; byte < data_regsz && 386 (byte + cnt) < len; byte++) { 387 buf[cnt + byte] = data & 0xff; 388 data >>= BITS_PER_BYTE; 389 } 390 } 391 } 392 393 return 0; 394 } 395 396 /* Write a single byte of data to the i2c bus */ 397 static int brcmstb_i2c_write_data_byte(struct brcmstb_i2c_dev *dev, 398 u8 *buf, unsigned int nak_expected) 399 { 400 enum bsc_xfer_cmd cmd = nak_expected ? CMD_WR : CMD_WR_NOACK; 401 402 bsc_writel(dev, 1, cnt_reg); 403 bsc_writel(dev, *buf, data_in); 404 405 return brcmstb_send_i2c_cmd(dev, cmd); 406 } 407 408 /* Send i2c address */ 409 static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev, 410 struct i2c_msg *msg) 411 { 412 unsigned char addr; 413 414 if (msg->flags & I2C_M_TEN) { 415 /* First byte is 11110XX0 where XX is upper 2 bits */ 416 addr = 0xF0 | ((msg->addr & 0x300) >> 7); 417 bsc_writel(dev, addr, chip_address); 418 419 /* Second byte is the remaining 8 bits */ 420 addr = msg->addr & 0xFF; 421 if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0) 422 return -EREMOTEIO; 423 424 if (msg->flags & I2C_M_RD) { 425 /* For read, send restart without stop condition */ 426 brcmstb_set_i2c_start_stop(dev, COND_RESTART 427 | COND_NOSTOP); 428 /* Then re-send the first byte with the read bit set */ 429 addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01; 430 if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0) 431 return -EREMOTEIO; 432 433 } 434 } else { 435 addr = i2c_8bit_addr_from_msg(msg); 436 437 bsc_writel(dev, addr, chip_address); 438 } 439 440 return 0; 441 } 442 443 /* Master transfer function */ 444 static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, 445 struct i2c_msg msgs[], int num) 446 { 447 struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter); 448 struct i2c_msg *pmsg; 449 int rc = 0; 450 int i; 451 int bytes_to_xfer; 452 u8 *tmp_buf; 453 int len = 0; 454 int xfersz = brcmstb_i2c_get_xfersz(dev); 455 u32 cond, cond_per_msg; 456 457 /* Loop through all messages */ 458 for (i = 0; i < num; i++) { 459 pmsg = &msgs[i]; 460 len = pmsg->len; 461 tmp_buf = pmsg->buf; 462 463 dev_dbg(dev->device, 464 "msg# %d/%d flg %x buf %x len %d\n", i, 465 num - 1, pmsg->flags, 466 pmsg->buf ? pmsg->buf[0] : '0', pmsg->len); 467 468 if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART)) 469 cond = ~COND_START_STOP; 470 else 471 cond = COND_RESTART | COND_NOSTOP; 472 473 brcmstb_set_i2c_start_stop(dev, cond); 474 475 /* Send slave address */ 476 if (!(pmsg->flags & I2C_M_NOSTART)) { 477 rc = brcmstb_i2c_do_addr(dev, pmsg); 478 if (rc < 0) { 479 dev_dbg(dev->device, 480 "NACK for addr %2.2x msg#%d rc = %d\n", 481 pmsg->addr, i, rc); 482 goto out; 483 } 484 } 485 486 cond_per_msg = cond; 487 488 /* Perform data transfer */ 489 while (len) { 490 bytes_to_xfer = min(len, xfersz); 491 492 if (len <= xfersz) { 493 if (i == (num - 1)) 494 cond_per_msg = cond_per_msg & 495 ~(COND_RESTART | COND_NOSTOP); 496 else 497 cond_per_msg = cond; 498 } else { 499 cond_per_msg = (cond_per_msg & ~COND_RESTART) | 500 COND_NOSTOP; 501 } 502 503 brcmstb_set_i2c_start_stop(dev, cond_per_msg); 504 505 rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf, 506 bytes_to_xfer, pmsg); 507 if (rc < 0) 508 goto out; 509 510 len -= bytes_to_xfer; 511 tmp_buf += bytes_to_xfer; 512 513 cond_per_msg = COND_NOSTART | COND_NOSTOP; 514 } 515 } 516 517 rc = num; 518 out: 519 return rc; 520 521 } 522 523 static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap) 524 { 525 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR 526 | I2C_FUNC_NOSTART | I2C_FUNC_PROTOCOL_MANGLING; 527 } 528 529 static const struct i2c_algorithm brcmstb_i2c_algo = { 530 .master_xfer = brcmstb_i2c_xfer, 531 .functionality = brcmstb_i2c_functionality, 532 }; 533 534 static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev) 535 { 536 int i = 0, num_speeds = ARRAY_SIZE(bsc_clk); 537 u32 clk_freq_hz = dev->clk_freq_hz; 538 539 for (i = 0; i < num_speeds; i++) { 540 if (bsc_clk[i].hz == clk_freq_hz) { 541 dev->bsc_regmap->ctl_reg &= ~(BSC_CTL_REG_SCL_SEL_MASK 542 | BSC_CTL_REG_DIV_CLK_MASK); 543 dev->bsc_regmap->ctl_reg |= (bsc_clk[i].scl_mask | 544 bsc_clk[i].div_mask); 545 bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg); 546 break; 547 } 548 } 549 550 /* in case we did not get find a valid speed */ 551 if (i == num_speeds) { 552 i = (bsc_readl(dev, ctl_reg) & BSC_CTL_REG_SCL_SEL_MASK) >> 553 BSC_CTL_REG_SCL_SEL_SHIFT; 554 dev_warn(dev->device, "leaving current clock-frequency @ %dHz\n", 555 bsc_clk[i].hz); 556 } 557 } 558 559 static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev) 560 { 561 if (brcmstb_i2c_get_data_regsz(dev) == sizeof(u32)) 562 /* set 4 byte data in/out xfers */ 563 dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK; 564 else 565 dev->bsc_regmap->ctlhi_reg &= ~BSC_CTLHI_REG_DATAREG_SIZE_MASK; 566 567 bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg); 568 /* set bus speed */ 569 brcmstb_i2c_set_bus_speed(dev); 570 } 571 572 #define AUTOI2C_CTRL0 0x26c 573 #define AUTOI2C_CTRL0_RELEASE_BSC BIT(1) 574 575 static int bcm2711_release_bsc(struct brcmstb_i2c_dev *dev) 576 { 577 struct platform_device *pdev = to_platform_device(dev->device); 578 void __iomem *autoi2c; 579 580 /* Map hardware registers */ 581 autoi2c = devm_platform_ioremap_resource_byname(pdev, "auto-i2c"); 582 if (IS_ERR(autoi2c)) 583 return PTR_ERR(autoi2c); 584 585 writel(AUTOI2C_CTRL0_RELEASE_BSC, autoi2c + AUTOI2C_CTRL0); 586 devm_iounmap(&pdev->dev, autoi2c); 587 588 /* We need to reset the controller after the release */ 589 dev->bsc_regmap->iic_enable = 0; 590 bsc_writel(dev, dev->bsc_regmap->iic_enable, iic_enable); 591 592 return 0; 593 } 594 595 static int brcmstb_i2c_probe(struct platform_device *pdev) 596 { 597 int rc = 0; 598 struct brcmstb_i2c_dev *dev; 599 struct i2c_adapter *adap; 600 struct resource *iomem; 601 const char *int_name; 602 603 /* Allocate memory for private data structure */ 604 dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); 605 if (!dev) 606 return -ENOMEM; 607 608 dev->bsc_regmap = devm_kzalloc(&pdev->dev, sizeof(*dev->bsc_regmap), GFP_KERNEL); 609 if (!dev->bsc_regmap) 610 return -ENOMEM; 611 612 platform_set_drvdata(pdev, dev); 613 dev->device = &pdev->dev; 614 init_completion(&dev->done); 615 616 /* Map hardware registers */ 617 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 618 dev->base = devm_ioremap_resource(dev->device, iomem); 619 if (IS_ERR(dev->base)) { 620 rc = -ENOMEM; 621 goto probe_errorout; 622 } 623 624 if (of_device_is_compatible(dev->device->of_node, 625 "brcm,bcm2711-hdmi-i2c")) { 626 rc = bcm2711_release_bsc(dev); 627 if (rc) 628 goto probe_errorout; 629 } 630 631 rc = of_property_read_string(dev->device->of_node, "interrupt-names", 632 &int_name); 633 if (rc < 0) 634 int_name = NULL; 635 636 /* Get the interrupt number */ 637 dev->irq = platform_get_irq_optional(pdev, 0); 638 639 /* disable the bsc interrupt line */ 640 brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); 641 642 /* register the ISR handler */ 643 if (dev->irq >= 0) { 644 rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr, 645 IRQF_SHARED, 646 int_name ? int_name : pdev->name, 647 dev); 648 649 if (rc) { 650 dev_dbg(dev->device, "falling back to polling mode"); 651 dev->irq = -1; 652 } 653 } 654 655 if (of_property_read_u32(dev->device->of_node, 656 "clock-frequency", &dev->clk_freq_hz)) { 657 dev_warn(dev->device, "setting clock-frequency@%dHz\n", 658 bsc_clk[0].hz); 659 dev->clk_freq_hz = bsc_clk[0].hz; 660 } 661 662 /* set the data in/out register size for compatible SoCs */ 663 if (of_device_is_compatible(dev->device->of_node, 664 "brcm,brcmper-i2c")) 665 dev->data_regsz = sizeof(u8); 666 else 667 dev->data_regsz = sizeof(u32); 668 669 brcmstb_i2c_set_bsc_reg_defaults(dev); 670 671 /* Add the i2c adapter */ 672 adap = &dev->adapter; 673 i2c_set_adapdata(adap, dev); 674 adap->owner = THIS_MODULE; 675 strscpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); 676 adap->algo = &brcmstb_i2c_algo; 677 adap->dev.parent = &pdev->dev; 678 adap->dev.of_node = pdev->dev.of_node; 679 rc = i2c_add_adapter(adap); 680 if (rc) 681 goto probe_errorout; 682 683 dev_info(dev->device, "%s@%dhz registered in %s mode\n", 684 int_name ? int_name : " ", dev->clk_freq_hz, 685 (dev->irq >= 0) ? "interrupt" : "polling"); 686 687 return 0; 688 689 probe_errorout: 690 return rc; 691 } 692 693 static void brcmstb_i2c_remove(struct platform_device *pdev) 694 { 695 struct brcmstb_i2c_dev *dev = platform_get_drvdata(pdev); 696 697 i2c_del_adapter(&dev->adapter); 698 } 699 700 #ifdef CONFIG_PM_SLEEP 701 static int brcmstb_i2c_suspend(struct device *dev) 702 { 703 struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev); 704 705 i2c_mark_adapter_suspended(&i2c_dev->adapter); 706 return 0; 707 } 708 709 static int brcmstb_i2c_resume(struct device *dev) 710 { 711 struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev); 712 713 brcmstb_i2c_set_bsc_reg_defaults(i2c_dev); 714 i2c_mark_adapter_resumed(&i2c_dev->adapter); 715 716 return 0; 717 } 718 #endif 719 720 static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend, 721 brcmstb_i2c_resume); 722 723 static const struct of_device_id brcmstb_i2c_of_match[] = { 724 {.compatible = "brcm,brcmstb-i2c"}, 725 {.compatible = "brcm,brcmper-i2c"}, 726 {.compatible = "brcm,bcm2711-hdmi-i2c"}, 727 {}, 728 }; 729 MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match); 730 731 static struct platform_driver brcmstb_i2c_driver = { 732 .driver = { 733 .name = "brcmstb-i2c", 734 .of_match_table = brcmstb_i2c_of_match, 735 .pm = &brcmstb_i2c_pm, 736 }, 737 .probe = brcmstb_i2c_probe, 738 .remove_new = brcmstb_i2c_remove, 739 }; 740 module_platform_driver(brcmstb_i2c_driver); 741 742 MODULE_AUTHOR("Kamal Dasu <kdasu@broadcom.com>"); 743 MODULE_DESCRIPTION("Broadcom Settop I2C Driver"); 744 MODULE_LICENSE("GPL v2"); 745