1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge 4 * 5 * Copyright (C) 2004 Patrick Mochel 6 * 2005 Rudolf Marek <r.marek@assembler.cz> 7 * 8 * The 1563 southbridge is deceptively similar to the 1533, with a 9 * few notable exceptions. One of those happens to be the fact they 10 * upgraded the i2c core to be 2.0 compliant, and happens to be almost 11 * identical to the i2c controller found in the Intel 801 south 12 * bridges. 13 * 14 * This driver is based on a mix of the 15x3, 1535, and i801 drivers, 15 * with a little help from the ALi 1563 spec. 16 */ 17 18 #include <linux/module.h> 19 #include <linux/delay.h> 20 #include <linux/i2c.h> 21 #include <linux/pci.h> 22 #include <linux/acpi.h> 23 24 #define ALI1563_MAX_TIMEOUT 500 25 #define ALI1563_SMBBA 0x80 26 #define ALI1563_SMB_IOEN 1 27 #define ALI1563_SMB_HOSTEN 2 28 #define ALI1563_SMB_IOSIZE 16 29 30 #define SMB_HST_STS (ali1563_smba + 0) 31 #define SMB_HST_CNTL1 (ali1563_smba + 1) 32 #define SMB_HST_CNTL2 (ali1563_smba + 2) 33 #define SMB_HST_CMD (ali1563_smba + 3) 34 #define SMB_HST_ADD (ali1563_smba + 4) 35 #define SMB_HST_DAT0 (ali1563_smba + 5) 36 #define SMB_HST_DAT1 (ali1563_smba + 6) 37 #define SMB_BLK_DAT (ali1563_smba + 7) 38 39 #define HST_STS_BUSY 0x01 40 #define HST_STS_INTR 0x02 41 #define HST_STS_DEVERR 0x04 42 #define HST_STS_BUSERR 0x08 43 #define HST_STS_FAIL 0x10 44 #define HST_STS_DONE 0x80 45 #define HST_STS_BAD 0x1c 46 47 48 #define HST_CNTL1_TIMEOUT 0x80 49 #define HST_CNTL1_LAST 0x40 50 51 #define HST_CNTL2_KILL 0x04 52 #define HST_CNTL2_START 0x40 53 #define HST_CNTL2_QUICK 0x00 54 #define HST_CNTL2_BYTE 0x01 55 #define HST_CNTL2_BYTE_DATA 0x02 56 #define HST_CNTL2_WORD_DATA 0x03 57 #define HST_CNTL2_BLOCK 0x05 58 59 60 #define HST_CNTL2_SIZEMASK 0x38 61 62 static struct pci_driver ali1563_pci_driver; 63 static unsigned short ali1563_smba; 64 65 static int ali1563_transaction(struct i2c_adapter *a, int size) 66 { 67 u32 data; 68 int timeout; 69 int status = -EIO; 70 71 dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, " 72 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 73 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 74 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 75 inb_p(SMB_HST_DAT1)); 76 77 data = inb_p(SMB_HST_STS); 78 if (data & HST_STS_BAD) { 79 dev_err(&a->dev, "ali1563: Trying to reset busy device\n"); 80 outb_p(data | HST_STS_BAD, SMB_HST_STS); 81 data = inb_p(SMB_HST_STS); 82 if (data & HST_STS_BAD) 83 return -EBUSY; 84 } 85 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); 86 87 timeout = ALI1563_MAX_TIMEOUT; 88 do { 89 msleep(1); 90 } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout); 91 92 dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, " 93 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 94 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 95 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 96 inb_p(SMB_HST_DAT1)); 97 98 if (timeout && !(data & HST_STS_BAD)) 99 return 0; 100 101 if (!timeout) { 102 /* Issue 'kill' to host controller */ 103 outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2); 104 data = inb_p(SMB_HST_STS); 105 status = -ETIMEDOUT; 106 } 107 108 /* device error - no response, ignore the autodetection case */ 109 if (data & HST_STS_DEVERR) { 110 if (size != HST_CNTL2_QUICK) 111 dev_err(&a->dev, "Device error!\n"); 112 status = -ENXIO; 113 } 114 /* bus collision */ 115 if (data & HST_STS_BUSERR) { 116 dev_err(&a->dev, "Bus collision!\n"); 117 /* Issue timeout, hoping it helps */ 118 outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1); 119 } 120 121 if (data & HST_STS_FAIL) { 122 dev_err(&a->dev, "Cleaning fail after KILL!\n"); 123 outb_p(0x0, SMB_HST_CNTL2); 124 } 125 126 return status; 127 } 128 129 static int ali1563_block_start(struct i2c_adapter *a) 130 { 131 u32 data; 132 int timeout; 133 int status = -EIO; 134 135 dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, " 136 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 137 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 138 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 139 inb_p(SMB_HST_DAT1)); 140 141 data = inb_p(SMB_HST_STS); 142 if (data & HST_STS_BAD) { 143 dev_warn(&a->dev, "ali1563: Trying to reset busy device\n"); 144 outb_p(data | HST_STS_BAD, SMB_HST_STS); 145 data = inb_p(SMB_HST_STS); 146 if (data & HST_STS_BAD) 147 return -EBUSY; 148 } 149 150 /* Clear byte-ready bit */ 151 outb_p(data | HST_STS_DONE, SMB_HST_STS); 152 153 /* Start transaction and wait for byte-ready bit to be set */ 154 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); 155 156 timeout = ALI1563_MAX_TIMEOUT; 157 do { 158 msleep(1); 159 } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout); 160 161 dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, " 162 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 163 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 164 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 165 inb_p(SMB_HST_DAT1)); 166 167 if (timeout && !(data & HST_STS_BAD)) 168 return 0; 169 170 if (timeout == 0) 171 status = -ETIMEDOUT; 172 173 if (data & HST_STS_DEVERR) 174 status = -ENXIO; 175 176 dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n", 177 timeout ? "" : "Timeout ", 178 data & HST_STS_FAIL ? "Transaction Failed " : "", 179 data & HST_STS_BUSERR ? "No response or Bus Collision " : "", 180 data & HST_STS_DEVERR ? "Device Error " : "", 181 !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); 182 return status; 183 } 184 185 static int ali1563_block(struct i2c_adapter *a, 186 union i2c_smbus_data *data, u8 rw) 187 { 188 int i, len; 189 int error = 0; 190 191 /* Do we need this? */ 192 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); 193 194 if (rw == I2C_SMBUS_WRITE) { 195 len = data->block[0]; 196 if (len < 1) 197 len = 1; 198 else if (len > 32) 199 len = 32; 200 outb_p(len, SMB_HST_DAT0); 201 outb_p(data->block[1], SMB_BLK_DAT); 202 } else 203 len = 32; 204 205 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2); 206 207 for (i = 0; i < len; i++) { 208 if (rw == I2C_SMBUS_WRITE) { 209 outb_p(data->block[i + 1], SMB_BLK_DAT); 210 error = ali1563_block_start(a); 211 if (error) 212 break; 213 } else { 214 error = ali1563_block_start(a); 215 if (error) 216 break; 217 if (i == 0) { 218 len = inb_p(SMB_HST_DAT0); 219 if (len < 1) 220 len = 1; 221 else if (len > 32) 222 len = 32; 223 } 224 data->block[i+1] = inb_p(SMB_BLK_DAT); 225 } 226 } 227 /* Do we need this? */ 228 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); 229 return error; 230 } 231 232 static s32 ali1563_access(struct i2c_adapter *a, u16 addr, 233 unsigned short flags, char rw, u8 cmd, 234 int size, union i2c_smbus_data *data) 235 { 236 int error = 0; 237 int timeout; 238 u32 reg; 239 240 for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) { 241 reg = inb_p(SMB_HST_STS); 242 if (!(reg & HST_STS_BUSY)) 243 break; 244 } 245 if (!timeout) 246 dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg); 247 outb_p(0xff, SMB_HST_STS); 248 249 /* Map the size to what the chip understands */ 250 switch (size) { 251 case I2C_SMBUS_QUICK: 252 size = HST_CNTL2_QUICK; 253 break; 254 case I2C_SMBUS_BYTE: 255 size = HST_CNTL2_BYTE; 256 break; 257 case I2C_SMBUS_BYTE_DATA: 258 size = HST_CNTL2_BYTE_DATA; 259 break; 260 case I2C_SMBUS_WORD_DATA: 261 size = HST_CNTL2_WORD_DATA; 262 break; 263 case I2C_SMBUS_BLOCK_DATA: 264 size = HST_CNTL2_BLOCK; 265 break; 266 default: 267 dev_warn(&a->dev, "Unsupported transaction %d\n", size); 268 error = -EOPNOTSUPP; 269 goto Done; 270 } 271 272 outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); 273 outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | 274 (size << 3), SMB_HST_CNTL2); 275 276 /* Write the command register */ 277 278 switch (size) { 279 case HST_CNTL2_BYTE: 280 if (rw == I2C_SMBUS_WRITE) 281 /* Beware it uses DAT0 register and not CMD! */ 282 outb_p(cmd, SMB_HST_DAT0); 283 break; 284 case HST_CNTL2_BYTE_DATA: 285 outb_p(cmd, SMB_HST_CMD); 286 if (rw == I2C_SMBUS_WRITE) 287 outb_p(data->byte, SMB_HST_DAT0); 288 break; 289 case HST_CNTL2_WORD_DATA: 290 outb_p(cmd, SMB_HST_CMD); 291 if (rw == I2C_SMBUS_WRITE) { 292 outb_p(data->word & 0xff, SMB_HST_DAT0); 293 outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1); 294 } 295 break; 296 case HST_CNTL2_BLOCK: 297 outb_p(cmd, SMB_HST_CMD); 298 error = ali1563_block(a, data, rw); 299 goto Done; 300 } 301 302 error = ali1563_transaction(a, size); 303 if (error) 304 goto Done; 305 306 if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK)) 307 goto Done; 308 309 switch (size) { 310 case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */ 311 data->byte = inb_p(SMB_HST_DAT0); 312 break; 313 case HST_CNTL2_BYTE_DATA: 314 data->byte = inb_p(SMB_HST_DAT0); 315 break; 316 case HST_CNTL2_WORD_DATA: 317 data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8); 318 break; 319 } 320 Done: 321 return error; 322 } 323 324 static u32 ali1563_func(struct i2c_adapter *a) 325 { 326 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 327 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 328 I2C_FUNC_SMBUS_BLOCK_DATA; 329 } 330 331 332 static int ali1563_setup(struct pci_dev *dev) 333 { 334 u16 ctrl; 335 336 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); 337 338 /* SMB I/O Base in high 12 bits and must be aligned with the 339 * size of the I/O space. */ 340 ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1); 341 if (!ali1563_smba) { 342 dev_warn(&dev->dev, "ali1563_smba Uninitialized\n"); 343 goto Err; 344 } 345 346 /* Check if device is enabled */ 347 if (!(ctrl & ALI1563_SMB_HOSTEN)) { 348 dev_warn(&dev->dev, "Host Controller not enabled\n"); 349 goto Err; 350 } 351 if (!(ctrl & ALI1563_SMB_IOEN)) { 352 dev_warn(&dev->dev, "I/O space not enabled, trying manually\n"); 353 pci_write_config_word(dev, ALI1563_SMBBA, 354 ctrl | ALI1563_SMB_IOEN); 355 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); 356 if (!(ctrl & ALI1563_SMB_IOEN)) { 357 dev_err(&dev->dev, 358 "I/O space still not enabled, giving up\n"); 359 goto Err; 360 } 361 } 362 363 if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE, 364 ali1563_pci_driver.name)) 365 goto Err; 366 367 if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, 368 ali1563_pci_driver.name)) { 369 dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n", 370 ali1563_smba); 371 goto Err; 372 } 373 dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba); 374 375 return 0; 376 Err: 377 return -ENODEV; 378 } 379 380 static void ali1563_shutdown(struct pci_dev *dev) 381 { 382 release_region(ali1563_smba, ALI1563_SMB_IOSIZE); 383 } 384 385 static const struct i2c_algorithm ali1563_algorithm = { 386 .smbus_xfer = ali1563_access, 387 .functionality = ali1563_func, 388 }; 389 390 static struct i2c_adapter ali1563_adapter = { 391 .owner = THIS_MODULE, 392 .class = I2C_CLASS_HWMON, 393 .algo = &ali1563_algorithm, 394 }; 395 396 static int ali1563_probe(struct pci_dev *dev, 397 const struct pci_device_id *id_table) 398 { 399 int error; 400 401 error = ali1563_setup(dev); 402 if (error) 403 goto exit; 404 ali1563_adapter.dev.parent = &dev->dev; 405 snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name), 406 "SMBus ALi 1563 Adapter @ %04x", ali1563_smba); 407 error = i2c_add_adapter(&ali1563_adapter); 408 if (error) 409 goto exit_shutdown; 410 return 0; 411 412 exit_shutdown: 413 ali1563_shutdown(dev); 414 exit: 415 dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error); 416 return error; 417 } 418 419 static void ali1563_remove(struct pci_dev *dev) 420 { 421 i2c_del_adapter(&ali1563_adapter); 422 ali1563_shutdown(dev); 423 } 424 425 static const struct pci_device_id ali1563_id_table[] = { 426 { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) }, 427 {}, 428 }; 429 430 MODULE_DEVICE_TABLE(pci, ali1563_id_table); 431 432 static struct pci_driver ali1563_pci_driver = { 433 .name = "ali1563_smbus", 434 .id_table = ali1563_id_table, 435 .probe = ali1563_probe, 436 .remove = ali1563_remove, 437 }; 438 439 module_pci_driver(ali1563_pci_driver); 440 441 MODULE_LICENSE("GPL"); 442